This paper employs system dynamics to explore how the synergy between technology management and technological capability affects new product development.The results show that the synergy between technology management ...This paper employs system dynamics to explore how the synergy between technology management and technological capability affects new product development.The results show that the synergy between technology management and technological capability has positive impact on new product development.Moreover, the leading synergy processes between technology management and technological capability in different new product development stages are different.This paper deepens the theoretical understanding of how to achieve new product development, and also provides useful guidance for firms to implement new product development.展开更多
Agile manufacturing is a new production mode. This pa per discusses the four problems of production management in the environment of a gile manufacturing, and some countermeasures are advanced: (1) Organization of pro...Agile manufacturing is a new production mode. This pa per discusses the four problems of production management in the environment of a gile manufacturing, and some countermeasures are advanced: (1) Organization of production. Traditional MTO production or MTS production ca n not meet the requirement of agile manufacturing which request both high produc tivity and the manufacturing flexibility. For this, the paper advances best way is to use the production organization mode of MCP (Mass Customization Production ),and some strategies of MCP are discussed. (2) Production planning. The requirement of agile manufacturing to production pl anning embodies in two facets: synchronization and flexibility. The paper su ggests that the structure and function of MRPII system should be improved in ord er to meet the demand of agile manufacturing. (3) Production control. The problem of production control is how to reduce the u ncertainty of hand over time between enterprises and increase the production syn chronization level. The paper advances some research direction on improving production ability. (4) Quality control. The problems of quality management are how to transfer the information of customer’s quality requirement between different organizations an d how to keep the consistency and stability of quality. Some countermeasures are advanced. In the end of the paper, one case advanced administrates how to utilize the thou ghts of agile manufacturing to upgrade the competition ability.展开更多
With the development and widely used of the compute r technology, the CAD has been more and more used in the process of designing prod uct. The number of the engineering drawings will greatly increase because of the c...With the development and widely used of the compute r technology, the CAD has been more and more used in the process of designing prod uct. The number of the engineering drawings will greatly increase because of the continually appearance of the new products. As a result, it has become a badly needed to be solved problem for us that how to rapidly and efficiently search an d appropriately preserve and manage the drawings. In this paper, a method of bui lding the product drawing management system for extrusion aluminum-type materia ls is discussed. This system is designed for the profile graphic of the aluminou s section material management by using Group Technology (GT) principle. Accordin g to the GT, we developed a classifying-coding system and drawing management sy stem about the extrusion aluminum-type materials through analyzing a large numb er of extrusion aluminum-type materials section drawings. The coding system has realized the flexible coding and hidden coding of the extrusion aluminum-type materials and then enhanced the flexibility and the expansible of the system. By supplying the designer with the human-computer interaction interface the drawi ng management system has been able to resolve many difficult problems such as se arch and manage the existed drawings about the extrusion aluminum-type material s very well. At the same time, it also helps the developing work enhance the abi lity of inheriting by applying this kind of variant method. In a word, with the help of this system we can not only shorten the designing time greatly and reduc e the cost of the product but also research the designing drawings rapidly. In o rder to output the data information related to the part drawing, the system uses the data-exchange standard to which the drawing support-software adapted as d ata-exchange interface. The system is advantageous to building a standard of dr awing design and increasing the efficiency of searching drawing and enhancing th e information management, which have had a base for building the best management system in the future. In addition, the paper has a detailed analysis about the principle of flexible classification code and data structure.展开更多
Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s in...Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.展开更多
A 10 year research programme at Lincoln University, investigating the use of Trichoderma species for biological control of soil-borne diseases of vegetable crops, has resulted in the development of two commercial prod...A 10 year research programme at Lincoln University, investigating the use of Trichoderma species for biological control of soil-borne diseases of vegetable crops, has resulted in the development of two commercial products. Trichodry TM. 6S and Trichoflow TM. 6S based upon Trichoderma hamatum isolate 6SR4, are used to control Sclerotinia lettuce drop disease. The Trichodry 6S product is formulated as a dry flake, which is incorporated into nursery seedling mix and the Trichoflow 6S is a wettable powder which is used as a top-up drench before planting. The treatment stimulates seedling establishment and vigour and protects the developing seedling from Sclerotinia minor infection after transplanting in the field.The second commercial product is Trichopel TM. Ali 52, based upon Trichoderma atroviride isolate C52, which is used to control Sclerotium cepivorum, the causal agent of Allium white rot disease. The product is formulated as a granule and applied into the furrow at planting time. The fungus proliferates in the rhizosphere region and protects the growing seedling from pathogen attack by a combination of nutrient competition, antibiosis and mycoparasitism. The use of Trichopel Ali 52 under low to medium disease pressure in Pukekohe, the main vegetable growing region of New Zealand, gave a three fold cost benefit through yield increases in the 2003-2004 season. Current field development work involves the use of a wettable powder formulation of T. atroviride distributed via a T-tape irrigation system to target mid-season applications of the product to the onion roots. Both products perform well under low to moderate disease pressure but, when there is high disease pressure, an integrated programme is required to give satisfactory control. Current research is focused on gaining a greater understanding of the biotic and abiotic factors, which influence biocontrol activity under field conditions as a means to enhance integrated control approaches. For example, T. atroviride C52, when applied to the planting furrow, is compatible with procymidone, benomyl and captan but not thiram when applied as onion seed treatments. It is also compatible with the majority of other fungicides applied to the onion crop to protect against foliar diseases such as Botrytis and downy mildew. The product can be integrated with the use of the germination stimulant diallyl disulphide (DADS) as long as the Trichoderma product is applied at least two weeks after DADS application. The product is not compatible with the use of nitrogen fertilisers due to the sensitivity of the Trichoderma mycelium to high N, thus, care must be taken to separate fertilizer application from that of the biocontrol product. Expansion of the range of crop diseases targeted by the biocontrol products is currently under investigation with promising results obtained against a number of Botrytis diseases.展开更多
The author uses system analysis to provide system thinkings of the deepening reform of the management of defence science, technology and industry (DSTI) and investigate the system definition of DSTI, the system reform...The author uses system analysis to provide system thinkings of the deepening reform of the management of defence science, technology and industry (DSTI) and investigate the system definition of DSTI, the system reform target, system operational mechanism, institutional structure, coordination and control functions and the orientation of conversion in China.展开更多
With the reform of rural network enterprise system,the speed of transfer property rights in rural power enterprises is accelerated.The evaluation of the operation and development status of rural power enterprises is d...With the reform of rural network enterprise system,the speed of transfer property rights in rural power enterprises is accelerated.The evaluation of the operation and development status of rural power enterprises is directly related to the future development and investment direction of rural power enterprises.At present,the evaluation of the production and operation of rural network enterprises and the development status of power network only relies on the experience of the evaluation personnel,sets the reference index,and forms the evaluation results through artificial scoring.Due to the strong subjective consciousness of the evaluation results,the practical guiding significance is weak.Therefore,distributed data mining method in rural power enterprises status evaluation was proposed which had been applied in many fields,such as food science,economy or chemical industry.The distributed mathematical model was established by using principal component analysis(PCA)and regression analysis.By screening various technical indicators and determining their relevance,the reference value of evaluation results was improved.Combined with statistical program for social sciences(SPSS)data analysis software,the operation status of rural network enterprises was evaluated,and the rationality,effectiveness and economy of the evaluation was verified through comparison with current evaluation results and calculation examples of actual grid operation data.展开更多
基金supported by the Heilongjiang Philosophy and Social Science Research Project (19GLB087)。
文摘This paper employs system dynamics to explore how the synergy between technology management and technological capability affects new product development.The results show that the synergy between technology management and technological capability has positive impact on new product development.Moreover, the leading synergy processes between technology management and technological capability in different new product development stages are different.This paper deepens the theoretical understanding of how to achieve new product development, and also provides useful guidance for firms to implement new product development.
文摘Agile manufacturing is a new production mode. This pa per discusses the four problems of production management in the environment of a gile manufacturing, and some countermeasures are advanced: (1) Organization of production. Traditional MTO production or MTS production ca n not meet the requirement of agile manufacturing which request both high produc tivity and the manufacturing flexibility. For this, the paper advances best way is to use the production organization mode of MCP (Mass Customization Production ),and some strategies of MCP are discussed. (2) Production planning. The requirement of agile manufacturing to production pl anning embodies in two facets: synchronization and flexibility. The paper su ggests that the structure and function of MRPII system should be improved in ord er to meet the demand of agile manufacturing. (3) Production control. The problem of production control is how to reduce the u ncertainty of hand over time between enterprises and increase the production syn chronization level. The paper advances some research direction on improving production ability. (4) Quality control. The problems of quality management are how to transfer the information of customer’s quality requirement between different organizations an d how to keep the consistency and stability of quality. Some countermeasures are advanced. In the end of the paper, one case advanced administrates how to utilize the thou ghts of agile manufacturing to upgrade the competition ability.
文摘With the development and widely used of the compute r technology, the CAD has been more and more used in the process of designing prod uct. The number of the engineering drawings will greatly increase because of the continually appearance of the new products. As a result, it has become a badly needed to be solved problem for us that how to rapidly and efficiently search an d appropriately preserve and manage the drawings. In this paper, a method of bui lding the product drawing management system for extrusion aluminum-type materia ls is discussed. This system is designed for the profile graphic of the aluminou s section material management by using Group Technology (GT) principle. Accordin g to the GT, we developed a classifying-coding system and drawing management sy stem about the extrusion aluminum-type materials through analyzing a large numb er of extrusion aluminum-type materials section drawings. The coding system has realized the flexible coding and hidden coding of the extrusion aluminum-type materials and then enhanced the flexibility and the expansible of the system. By supplying the designer with the human-computer interaction interface the drawi ng management system has been able to resolve many difficult problems such as se arch and manage the existed drawings about the extrusion aluminum-type material s very well. At the same time, it also helps the developing work enhance the abi lity of inheriting by applying this kind of variant method. In a word, with the help of this system we can not only shorten the designing time greatly and reduc e the cost of the product but also research the designing drawings rapidly. In o rder to output the data information related to the part drawing, the system uses the data-exchange standard to which the drawing support-software adapted as d ata-exchange interface. The system is advantageous to building a standard of dr awing design and increasing the efficiency of searching drawing and enhancing th e information management, which have had a base for building the best management system in the future. In addition, the paper has a detailed analysis about the principle of flexible classification code and data structure.
文摘Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.
文摘A 10 year research programme at Lincoln University, investigating the use of Trichoderma species for biological control of soil-borne diseases of vegetable crops, has resulted in the development of two commercial products. Trichodry TM. 6S and Trichoflow TM. 6S based upon Trichoderma hamatum isolate 6SR4, are used to control Sclerotinia lettuce drop disease. The Trichodry 6S product is formulated as a dry flake, which is incorporated into nursery seedling mix and the Trichoflow 6S is a wettable powder which is used as a top-up drench before planting. The treatment stimulates seedling establishment and vigour and protects the developing seedling from Sclerotinia minor infection after transplanting in the field.The second commercial product is Trichopel TM. Ali 52, based upon Trichoderma atroviride isolate C52, which is used to control Sclerotium cepivorum, the causal agent of Allium white rot disease. The product is formulated as a granule and applied into the furrow at planting time. The fungus proliferates in the rhizosphere region and protects the growing seedling from pathogen attack by a combination of nutrient competition, antibiosis and mycoparasitism. The use of Trichopel Ali 52 under low to medium disease pressure in Pukekohe, the main vegetable growing region of New Zealand, gave a three fold cost benefit through yield increases in the 2003-2004 season. Current field development work involves the use of a wettable powder formulation of T. atroviride distributed via a T-tape irrigation system to target mid-season applications of the product to the onion roots. Both products perform well under low to moderate disease pressure but, when there is high disease pressure, an integrated programme is required to give satisfactory control. Current research is focused on gaining a greater understanding of the biotic and abiotic factors, which influence biocontrol activity under field conditions as a means to enhance integrated control approaches. For example, T. atroviride C52, when applied to the planting furrow, is compatible with procymidone, benomyl and captan but not thiram when applied as onion seed treatments. It is also compatible with the majority of other fungicides applied to the onion crop to protect against foliar diseases such as Botrytis and downy mildew. The product can be integrated with the use of the germination stimulant diallyl disulphide (DADS) as long as the Trichoderma product is applied at least two weeks after DADS application. The product is not compatible with the use of nitrogen fertilisers due to the sensitivity of the Trichoderma mycelium to high N, thus, care must be taken to separate fertilizer application from that of the biocontrol product. Expansion of the range of crop diseases targeted by the biocontrol products is currently under investigation with promising results obtained against a number of Botrytis diseases.
文摘The author uses system analysis to provide system thinkings of the deepening reform of the management of defence science, technology and industry (DSTI) and investigate the system definition of DSTI, the system reform target, system operational mechanism, institutional structure, coordination and control functions and the orientation of conversion in China.
基金Supported by Funding(2017RAXXJ075)from Harbin Applied Technology Research and Development Project
文摘With the reform of rural network enterprise system,the speed of transfer property rights in rural power enterprises is accelerated.The evaluation of the operation and development status of rural power enterprises is directly related to the future development and investment direction of rural power enterprises.At present,the evaluation of the production and operation of rural network enterprises and the development status of power network only relies on the experience of the evaluation personnel,sets the reference index,and forms the evaluation results through artificial scoring.Due to the strong subjective consciousness of the evaluation results,the practical guiding significance is weak.Therefore,distributed data mining method in rural power enterprises status evaluation was proposed which had been applied in many fields,such as food science,economy or chemical industry.The distributed mathematical model was established by using principal component analysis(PCA)and regression analysis.By screening various technical indicators and determining their relevance,the reference value of evaluation results was improved.Combined with statistical program for social sciences(SPSS)data analysis software,the operation status of rural network enterprises was evaluated,and the rationality,effectiveness and economy of the evaluation was verified through comparison with current evaluation results and calculation examples of actual grid operation data.
