For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures...For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures of 700-850 °C and strain rates of 0.01-10 s-1. And at the true strain of 0.15, 0.35 and 0.55, respectively, the responses of strain-rate sensitivity, power dissipation efficiency and instability parameter to temperature and strain rate were studied. Instability maps and power dissipation maps were superimposed to form processing maps, which reveal the determinate regions where individual metallurgical processes occur and the limiting conditions of flow instability regions. Furthermore, the optimal processing parameters for bulk metal working are identified clearly by the processing maps.展开更多
The hot deformation behaviors of Cr5 steel were investigated.The hot compression tests were conducted in the temperature range of 900-1150 °C under strain rates of 0.01,0.1 and 1 s^(-1).The constitutive equation ...The hot deformation behaviors of Cr5 steel were investigated.The hot compression tests were conducted in the temperature range of 900-1150 °C under strain rates of 0.01,0.1 and 1 s^(-1).The constitutive equation and material constants(Q,n,α ln A) are obtained according to the hyperbolic sine function and Zener-Hollomon parameter.Besides,dynamic recrystallization(DRX) grain size model and critical strain model are acquired.The processing maps with the strain of 0.1,0.3 and 0.5 are obtained on the basis of dynamic materials model.It has been observed that DRX occurs at high temperature and low strain rate.According to the processing map,the safety region exists in the temperature range of 920-1150 °C with strain rate of 0.01-0.20 s^(-1).展开更多
The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among...The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among strain rate sensitivity,power dissipation efficiency and instability parameter under different conditions were studied.Power dissipation maps and instability maps at different strains were established.The optimal and the instable deformation regimes were established by the processing maps based on the dynamic material model.The processing maps were developed for the typical strains of 0.2,0.3,0.5 and 0.7,predicting the instability regions occurring at high strain rate more than 0.05 s^(-1),which should be avoided during hot deformation.The optimized processing parameters for hot working of 2CrllMolVNbN supercritical stainless steel were temperatures of 1080-1120 ℃ and strain rates of 0.005-0.01 s^(-1).展开更多
High-purity silver(Ag)is extensively utilized in electronics,aerospace,and other advanced industries due to its excellent thermal conductivity,electrical conductivity,and machinability.However,the prohibitive material...High-purity silver(Ag)is extensively utilized in electronics,aerospace,and other advanced industries due to its excellent thermal conductivity,electrical conductivity,and machinability.However,the prohibitive material cost poses substantial challenges for optimizing thermal processing parameters through repetitive experimental trials.In this work,hot compression experiments on high-purity silver were conducted using a Gleeble-3800 thermal simulator.The high temperature deformation behaviors,dynamic recovery(DRV)and dynamic recrystallization(DRX)of high-purity silver were studied by constructing an Arrhenius constitutive equation and developing thermal processing maps.The results show that plastic instability of high-purity silver occurs at high strain rates and the optimized hot processing parameters are the strain rate below 0.001 s^(−1) and the temperature of 340−400℃.Microstructural observations exhibit that DRV prefers to occur at lower deformation temperatures(e.g.,250℃).This is attributed to the low stacking fault energy of high-purity silver,which facilitates the decomposition of dislocations into partial dislocations and promotes high-density dislocation accumulation.Furthermore,DRX in high-purity silver becomes increasingly pronounced with increasing deformation temperature and reaches saturation at 350℃.展开更多
The apparent activation energy for deformation(Q)and strain rate sensitivity(m)of GH4586 superalloy are calculated and the variation trend is reasonably explained by the microstructure observations.Constitutive modell...The apparent activation energy for deformation(Q)and strain rate sensitivity(m)of GH4586 superalloy are calculated and the variation trend is reasonably explained by the microstructure observations.Constitutive modelling of this superalloy is established and the processing maps at different strains are constructed.The results show that the Q value is in the range of 751.22−878.29 kJ/mol.At a temperature of 1060°C,strain rate of 0.001 s^(−1),and strain of 0.65,the m value of GH4586 superalloy reaches a maximum of 0.42.The optimal processing parameter of GH4586 superalloy is at a deformation temperature of 1050°C and a strain rate of 0.001 s^(−1).The domains of flow instability notably expand with increasing strain during high temperature deformation of GH4586 superalloy.展开更多
This paper studies a queueing model with the finite buffer of capacity K in wireless cellular networks, which has two types of arriving calls--handoff and originating calls, both of which follow the Markov arriving pr...This paper studies a queueing model with the finite buffer of capacity K in wireless cellular networks, which has two types of arriving calls--handoff and originating calls, both of which follow the Markov arriving process with different rates. The channel holding times of the two types of calls follow different phase-type distributions. Firstly, the joint distribution of two queue lengths is derived, and then the dropping and blocking probabilities, the mean queue length and the mean waiting time from the joint distribution are gotten. Finally, numerical examples show the impact of different call arrival rates on the performance measures.展开更多
To obtain flow behavior and workability of 7055 aluminium alloy during hot deformation,hot compression tests at different temperatures and strain rates are conducted.True stress?strain curves of 7055 aluminium alloy u...To obtain flow behavior and workability of 7055 aluminium alloy during hot deformation,hot compression tests at different temperatures and strain rates are conducted.True stress?strain curves of 7055 aluminium alloy under different conditions are obtained and the flow stress increases with ascending strain rate and descending temperature.For Arrhenius constitutive equation,each material parameter is set as a constant,which will bring forth large error for predicting flow behavior.In this work,material parameters are fitted as a function of temperature or strain rate based on experimental results and a modified constitutive equation is established for more accurate prediction of flow behavior of 7055 aluminium alloy.The effects of temperature and strain rate on power dissipation and instability are analyzed to establish a processing map of 7055 aluminium alloy.The dominant deformation mechanism for microstructure evolution at different deformation conditions can be determined and high efficiency of power dissipation may be achieved from power dissipation map.Meanwhile,proper processing parameters to avoid flow instability can be easily acquired in instability map.According to the processing map,optimized processing parameters of 7055 aluminium alloy are temperature of 673?723 K and strain rate of 0.01?0.4 s^?1,during which its efficiency of power dissipation is over 30%.Finite element method(FEM)is used to obtain optimized parameter in hot rolling process on the basis of processing map.展开更多
The hot deformation behavior of Al-6.2Zn-0.70Mg-0.30Mn-0.17 Zr alloy and its microstructural evolution were investigated by isothermal compression test in the deformation temperature range between 623 and 773 K and th...The hot deformation behavior of Al-6.2Zn-0.70Mg-0.30Mn-0.17 Zr alloy and its microstructural evolution were investigated by isothermal compression test in the deformation temperature range between 623 and 773 K and the strain rate range between 0.01 and 20 s^(-1).The results show that the flow stress decreased with decreasing strain rate and increasing deformation temperature.At low deformation temperature(≤673 K) and high strain rate(≥1 s^(-1)),the main flow softening was caused by dynamic recovery;conversely,at higher deformation temperature and lower strain rate,the main flow softening was caused by dynamic recrystallization.Moreover,the slipping mechanism transformed from dislocation glide to grain boundary sliding with increasing the deformation temperature and decreasing the strain rate.According to TEM observation,numerous Al_3Zr particles precipitated in matrix,which could effectively inhibit the dynamic recrystallization of the alloy.Based on the processing map,the optimum processing conditions for experimental alloy were in deformation temperature range from 730 K to 773 K and strain rate range from 0.033 s^(-1) to 0.18 s^(-1) with the maximum efficiency of 39%.展开更多
The flow stress behavior of high-purity Al-Cu-Mg alloy under hot deformation conditions was studied by Gleeble-1500,with the deformation temperature range from 300 to 500 °C and the strain rate range from 0.01 to...The flow stress behavior of high-purity Al-Cu-Mg alloy under hot deformation conditions was studied by Gleeble-1500,with the deformation temperature range from 300 to 500 °C and the strain rate range from 0.01 to 10 s-1. From the true stress-true strain curve, the flow stress increases with the increasing of strain and tends to be constant after a peak value, showing dynamic recover, and the peak value of flow stress increases with the decreasing of deformation temperature and the increasing of strain rate.When the strain rate is 10 s-1 and the deformation temperature is higher than 400 °C, the flow stress shows dynamic recrystallization characteristic. TEM micrographs were used to reveal the evolution of microstructures. According to the processing map at true strain of 0.7, the feasible deformation conditions are high strain rate(>0.5 s-1) or 440-500 °C and 0.01-0.02 s-1.展开更多
基金Project(CSTC2009BA4065) supported by the Chongqing Natural Science Foundation,China
文摘For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures of 700-850 °C and strain rates of 0.01-10 s-1. And at the true strain of 0.15, 0.35 and 0.55, respectively, the responses of strain-rate sensitivity, power dissipation efficiency and instability parameter to temperature and strain rate were studied. Instability maps and power dissipation maps were superimposed to form processing maps, which reveal the determinate regions where individual metallurgical processes occur and the limiting conditions of flow instability regions. Furthermore, the optimal processing parameters for bulk metal working are identified clearly by the processing maps.
基金Project(51322405)supported by the National Natural Science Foundation of China
文摘The hot deformation behaviors of Cr5 steel were investigated.The hot compression tests were conducted in the temperature range of 900-1150 °C under strain rates of 0.01,0.1 and 1 s^(-1).The constitutive equation and material constants(Q,n,α ln A) are obtained according to the hyperbolic sine function and Zener-Hollomon parameter.Besides,dynamic recrystallization(DRX) grain size model and critical strain model are acquired.The processing maps with the strain of 0.1,0.3 and 0.5 are obtained on the basis of dynamic materials model.It has been observed that DRX occurs at high temperature and low strain rate.According to the processing map,the safety region exists in the temperature range of 920-1150 °C with strain rate of 0.01-0.20 s^(-1).
基金Project(CDJZR14130006)supported by the Fundamental Research Funds for the Central Universities,China
文摘The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among strain rate sensitivity,power dissipation efficiency and instability parameter under different conditions were studied.Power dissipation maps and instability maps at different strains were established.The optimal and the instable deformation regimes were established by the processing maps based on the dynamic material model.The processing maps were developed for the typical strains of 0.2,0.3,0.5 and 0.7,predicting the instability regions occurring at high strain rate more than 0.05 s^(-1),which should be avoided during hot deformation.The optimized processing parameters for hot working of 2CrllMolVNbN supercritical stainless steel were temperatures of 1080-1120 ℃ and strain rates of 0.005-0.01 s^(-1).
基金Project(52274369)supported by the National Natural Science Foundation of China。
文摘High-purity silver(Ag)is extensively utilized in electronics,aerospace,and other advanced industries due to its excellent thermal conductivity,electrical conductivity,and machinability.However,the prohibitive material cost poses substantial challenges for optimizing thermal processing parameters through repetitive experimental trials.In this work,hot compression experiments on high-purity silver were conducted using a Gleeble-3800 thermal simulator.The high temperature deformation behaviors,dynamic recovery(DRV)and dynamic recrystallization(DRX)of high-purity silver were studied by constructing an Arrhenius constitutive equation and developing thermal processing maps.The results show that plastic instability of high-purity silver occurs at high strain rates and the optimized hot processing parameters are the strain rate below 0.001 s^(−1) and the temperature of 340−400℃.Microstructural observations exhibit that DRV prefers to occur at lower deformation temperatures(e.g.,250℃).This is attributed to the low stacking fault energy of high-purity silver,which facilitates the decomposition of dislocations into partial dislocations and promotes high-density dislocation accumulation.Furthermore,DRX in high-purity silver becomes increasingly pronounced with increasing deformation temperature and reaches saturation at 350℃.
基金Project(2020JC-17)supported by the Science Fund for Distinguished Young Scholars from Shaanxi Province,ChinaProject(51705425)+4 种基金supported by the National Natural Science Foundation of ChinaProject(2019-QZ-04)supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),ChinaProjects(3102019PY007,3102019MS0403)supported by the Fundamental Research Funds for the Central Universities,China。
文摘The apparent activation energy for deformation(Q)and strain rate sensitivity(m)of GH4586 superalloy are calculated and the variation trend is reasonably explained by the microstructure observations.Constitutive modelling of this superalloy is established and the processing maps at different strains are constructed.The results show that the Q value is in the range of 751.22−878.29 kJ/mol.At a temperature of 1060°C,strain rate of 0.001 s^(−1),and strain of 0.65,the m value of GH4586 superalloy reaches a maximum of 0.42.The optimal processing parameter of GH4586 superalloy is at a deformation temperature of 1050°C and a strain rate of 0.001 s^(−1).The domains of flow instability notably expand with increasing strain during high temperature deformation of GH4586 superalloy.
基金supported by the Postgraduate Innovation Project of Jiangsu University (CX10B 003X)
文摘This paper studies a queueing model with the finite buffer of capacity K in wireless cellular networks, which has two types of arriving calls--handoff and originating calls, both of which follow the Markov arriving process with different rates. The channel holding times of the two types of calls follow different phase-type distributions. Firstly, the joint distribution of two queue lengths is derived, and then the dropping and blocking probabilities, the mean queue length and the mean waiting time from the joint distribution are gotten. Finally, numerical examples show the impact of different call arrival rates on the performance measures.
基金Project(51175257)supported by National Natural Science Foundation of ChinaProject(BK20170785)supported by the Natural Science Foundation of Jiangsu Province,China+1 种基金Project(BE2016179)supported by Science and Technology Planning Project of Jiangsu Province,ChinaProject(Kfkt2017-08)supported by Open Research Fund of State Key Laboratory for High Performance Complex Manufacturing,Central South University,China
文摘To obtain flow behavior and workability of 7055 aluminium alloy during hot deformation,hot compression tests at different temperatures and strain rates are conducted.True stress?strain curves of 7055 aluminium alloy under different conditions are obtained and the flow stress increases with ascending strain rate and descending temperature.For Arrhenius constitutive equation,each material parameter is set as a constant,which will bring forth large error for predicting flow behavior.In this work,material parameters are fitted as a function of temperature or strain rate based on experimental results and a modified constitutive equation is established for more accurate prediction of flow behavior of 7055 aluminium alloy.The effects of temperature and strain rate on power dissipation and instability are analyzed to establish a processing map of 7055 aluminium alloy.The dominant deformation mechanism for microstructure evolution at different deformation conditions can be determined and high efficiency of power dissipation may be achieved from power dissipation map.Meanwhile,proper processing parameters to avoid flow instability can be easily acquired in instability map.According to the processing map,optimized processing parameters of 7055 aluminium alloy are temperature of 673?723 K and strain rate of 0.01?0.4 s^?1,during which its efficiency of power dissipation is over 30%.Finite element method(FEM)is used to obtain optimized parameter in hot rolling process on the basis of processing map.
基金Project(2016GK1004)supported by the Science and Technology Major Project of Hunan Province,China
文摘The hot deformation behavior of Al-6.2Zn-0.70Mg-0.30Mn-0.17 Zr alloy and its microstructural evolution were investigated by isothermal compression test in the deformation temperature range between 623 and 773 K and the strain rate range between 0.01 and 20 s^(-1).The results show that the flow stress decreased with decreasing strain rate and increasing deformation temperature.At low deformation temperature(≤673 K) and high strain rate(≥1 s^(-1)),the main flow softening was caused by dynamic recovery;conversely,at higher deformation temperature and lower strain rate,the main flow softening was caused by dynamic recrystallization.Moreover,the slipping mechanism transformed from dislocation glide to grain boundary sliding with increasing the deformation temperature and decreasing the strain rate.According to TEM observation,numerous Al_3Zr particles precipitated in matrix,which could effectively inhibit the dynamic recrystallization of the alloy.Based on the processing map,the optimum processing conditions for experimental alloy were in deformation temperature range from 730 K to 773 K and strain rate range from 0.033 s^(-1) to 0.18 s^(-1) with the maximum efficiency of 39%.
基金Project(51301209) supported by the National Natural Science Foundation of ChinaProject(201191107) supported by Science and Technology Plan of Xinjiang Province,China
文摘The flow stress behavior of high-purity Al-Cu-Mg alloy under hot deformation conditions was studied by Gleeble-1500,with the deformation temperature range from 300 to 500 °C and the strain rate range from 0.01 to 10 s-1. From the true stress-true strain curve, the flow stress increases with the increasing of strain and tends to be constant after a peak value, showing dynamic recover, and the peak value of flow stress increases with the decreasing of deformation temperature and the increasing of strain rate.When the strain rate is 10 s-1 and the deformation temperature is higher than 400 °C, the flow stress shows dynamic recrystallization characteristic. TEM micrographs were used to reveal the evolution of microstructures. According to the processing map at true strain of 0.7, the feasible deformation conditions are high strain rate(>0.5 s-1) or 440-500 °C and 0.01-0.02 s-1.
