Lead iodide(PbI2) is a vital raw material for preparing perovskite solar cells(PSCs),and it not only takes part in forming the light absorption layer but also remains in the grain boundary as a passivator.In other wor...Lead iodide(PbI2) is a vital raw material for preparing perovskite solar cells(PSCs),and it not only takes part in forming the light absorption layer but also remains in the grain boundary as a passivator.In other words,the PbI2 content in the precursor and as formed film will affect the efficiency and stability of the PSCs.With moderate residual PbI2,it passivates the bulk/surface defects of perovskite,reduces the interfacial recombination,promotes the perovskite stability,minimizes the device hysteresis,and so on.Deficient PbI2 residue will reduce the interfacial passivation effect and device performance.In addition to facilitating the non-radiative recombination,over PbI2 residue can also lead to electronic insulation in the grain boundary and deteriorate the device performance.However,the impact and regulation of PbI2 residue on the device performance and stability is still not fully understood.Herein,a comprehensive and detailed review is presented by discussing the PbI2 residue impact and its regulation strategies(i.e., elimination,facilitation and conversion of the residue PbI2) to manipulate the PbI2 content,distribution and forms.Finally,we also show future outlooks in this field,with an aim to help further the progression of high-efficiency and stable PSCs.展开更多
Typical application scenarios,such as vehicle to grid(V2G)and frequency regulation,have imposed significant long-life demands on lithium-ion batteries.Herein,we propose an advanced battery life-extension method employ...Typical application scenarios,such as vehicle to grid(V2G)and frequency regulation,have imposed significant long-life demands on lithium-ion batteries.Herein,we propose an advanced battery life-extension method employing bidirectional pulse charging(BPC)strategy.Unlike traditional constant current charging methods,BPC strategy not only achieves comparable charging speeds but also facilitates V2G frequency regulation simultaneously.It significantly enhances battery cycle ampere-hour throughput and demonstrates remarkable life extension capabilities.For this interesting conclusion,adopting model identification and postmortem characterization to reveal the life regulation mechanism of BPC:it mitigates battery capacity loss attributed to loss of lithium-ion inventory(LLI)in graphite anodes by intermittently regulating the overall battery voltage and anode potential using a negative charging current.Then,from the perspective of internal side reaction,the life extension mechanism is further revealed as inhibition of solid electrolyte interphase(SEI)and lithium dendrite growth by regulating voltage with a bidirectional pulse current,and a semi-empirical life degradation model combining SEI and lithium dendrite growth is developed for BPC scenarios health management,the model parameters are identified by genetic algorithm with the life simulation exhibiting an accuracy exceeding 99%.This finding indicates that under typical rate conditions,adaptable BPC strategies can extend the service life of LFP battery by approximately 123%.Consequently,the developed advanced BPC strategy offers innovative perspectives and insights for the development of long-life battery applications in the future.展开更多
3D printing is widely adopted to quickly produce rock mass models with complex structures in batches,improving the consistency and repeatability of physical modeling.It is necessary to regulate the mechanical properti...3D printing is widely adopted to quickly produce rock mass models with complex structures in batches,improving the consistency and repeatability of physical modeling.It is necessary to regulate the mechanical properties of 3D-printed specimens to make them proportionally similar to natural rocks.This study investigates mechanical properties of 3D-printed rock analogues prepared by furan resin-bonded silica sand particles.The mechanical property regulation of 3D-printed specimens is realized through quantifying its similarity to sandstone,so that analogous deformation characteristics and failure mode are acquired.Considering similarity conversion,uniaxial compressive strength,cohesion and stress–strain relationship curve of 3D-printed specimen are similar to those of sandstone.In the study ranges,the strength of 3D-printed specimen is positively correlated with the additive content,negatively correlated with the sand particle size,and first increases then decreases with the increase of curing temperature.The regulation scheme with optimal similarity quantification index,that is the sand type of 70/140,additive content of 2.5‰and curing temperature of 81.6℃,is determined for preparing 3D-printed sandstone analogues and models.The effectiveness of mechanical property regulation is proved through uniaxial compression contrast tests.This study provides a reference for preparing rock-like specimens and engineering models using 3D printing technology.展开更多
The in-situ generated oxyanions at electrochemically reconstructed catalysts from metal-based nonoxide compounds have been proven to significantly accelerate oxygen evolution reaction(OER)kinetics.However,it remains a...The in-situ generated oxyanions at electrochemically reconstructed catalysts from metal-based nonoxide compounds have been proven to significantly accelerate oxygen evolution reaction(OER)kinetics.However,it remains a challenge to retain these self-released oxyanions at reconstructed catalysts,hindering its utilization as a tool to develop efficient OER catalysts.Here,we demonstrate a versatile selftransformed carbonate regulation strategy to efficiently retain the self-released chalcogenate at Co oxyhydroxides reconstructed from carbon-incorporated Co selenides under OER conditions.These selftransformed CO_(3)^(2-)can induce electron accumulation and narrow d bond at Co sites to facilitate the Co3d-O 2p orbital hybridization between Co sites and SeO_(x)^(2-)for enhanced SeO_(x)^(2-)retention,which can accelerate the rate-limiting step for^(*)OOH formation during OER.Relative to CoOOH-SeO_(x)^(2-)with limited SeO_(x)^(2-)residues,CoOOH-CO_(3)^(2-)/SeO_(x)^(2-)with elevated SeO_(x)^(2-)retention by CO_(3)^(2-)regulation exhibited a 5.6-fold increase in current density and a remarkable lower Tafel slope towards OER.This strategy paves a rational avenue to design efficient catalysts for electrooxidation reactions through finely regulating self-released oxyanions at reconstructed structures.展开更多
This paper presents the design and verification of the dual-mode core driven fan stage(CDFS)and high-load compressor with a large flow regulation range.In view of the characteristics of large flow regulation range of ...This paper presents the design and verification of the dual-mode core driven fan stage(CDFS)and high-load compressor with a large flow regulation range.In view of the characteristics of large flow regulation range of the two modes and high average stage load coefficient,this paper investigates the design technology of the dual-mode high-efficiency compressor with a large flow regulation range and high-load compressor with an average stage load coefficient of 0.504.Building upon this research,the design of the dual-mode CDFS and four-stage compressor is completed,and three-dimensional numerical simulation of the two modes is carried out.Finally,performance experiment is conducted to verify the result of three-dimensional numerical simulation.The experiment results show that the compressor performance is improved for the whole working conditions by using the new design method,which realizes the complete fusion design of the CDFS and high-pressure compressor(HPC).The matching mechanism of stage characteristics of single and double bypass modes and the variation rule of different adjustment angles on performance are studied comprehensively.Furthermore,it effectively reduces the length and weight of compressor,and breaks through the key technologies such as high-load compressor with the average load factor of 0.504.These findings provide valuable data and a methodological foundation for the development of the next generation aeroengine.展开更多
The global shift towards sustainable food systems has sparked innovations in food sources and production systems,including cell-based meat,plant-based food products,precision fermentation,and 3D food printing.These ad...The global shift towards sustainable food systems has sparked innovations in food sources and production systems,including cell-based meat,plant-based food products,precision fermentation,and 3D food printing.These advancements pose regulatory challenges and opportunities,with China emerging as a critical player in adopting and regulating new food technologies.This review explores the international landscape of new food sources and production systems(NFPS),focusing on China’s role and regulatory approaches compared to global practices.Through this comparative analysis,we aim to contribute to the ongoing dialogue on food safety regulation,offering insights and recommendations for policymakers,industry stakeholders,and researchers engaged in the global food system’s evolution.This comprehensive overview underscores the dynamic nature of regulatory frameworks governing NFPS,highlighting the international efforts to ensure food safety,consumer protection,and the sustainable evolution of the food industry.展开更多
Membrane tension plays a crucial role in various fundamental cellular processes,with one notable example being the T cell-mediated elimination of tumor cells through perforin-induced membrane perforation by amplifying...Membrane tension plays a crucial role in various fundamental cellular processes,with one notable example being the T cell-mediated elimination of tumor cells through perforin-induced membrane perforation by amplifying cellular force.However,the mechanisms governing the regulation of biomolecular activities at the cell interface by membrane tension remain elusive.In this study,we investigated the correlation between membrane tension and poration activity of melittin,a prototypical pore-forming peptide,using dynamic giant unilamellar vesicle leakage assays combined with flickering tension analysis,molecular dynamics simulations,and live cell assays.The results demonstrate that an increase in membrane tension enhances the activity of melittin,particularly near its critical pore-forming concentration.Moreover,peptide actions such as binding,insertion,and aggregation in the membrane further influence the evolution of membrane tension.Live cell experiments reveal that artificially enhancing membrane tension effectively enhances melittin’s ability to induce pore formation and disrupt membranes,resulting in up to a ten-fold increase in A549 cell mortality when exposed to a concentration of 2.0-μg·mL^(-1)melittin.Our findings elucidate the relationship between membrane tension and the mechanism of action as well as pore-forming efficiency of melittin,while providing a practical mechanical approach for regulating functional activity of molecules at the cell-membrane interface.展开更多
Owing to the distinctive structural characteristics,vanadium nitride(VN)is highly regarded as a catalyst for oxygen reduction reaction(ORR)in zinc-air batteries(ZABs).However,VN exhibits limited intrinsic ORR activity...Owing to the distinctive structural characteristics,vanadium nitride(VN)is highly regarded as a catalyst for oxygen reduction reaction(ORR)in zinc-air batteries(ZABs).However,VN exhibits limited intrinsic ORR activity due to the weak adsorption ability to O-containing species.Here,the S-doped VN anchored on N,S-doped multi-dimensional carbon(S-VN/Co/NS-MC)was constructed using the solvothermal and in-situ doping methods.Incorporating sulfur atoms into VN species alters the electron spin state of vanadium in the S-VN/Co/NS-MC for regulating the adsorption energy of vanadium sites to oxygen molecules.The introduced sulfur atoms polarize the V 3d_(z)^(2) electrons,shifting spin-down electrons closer to the Fermi level in the S-VN/Co/NS-MC.Consequently,the introduction of sulfur atoms into VN species enhances the adsorption energy of vanadium sites for oxygen molecules.The*OOH dissociation transitions from being unspontaneous on the VN surface to a spontaneous state on the S-doped VN surface.Then,the ORR barrier on the S-VN/Co/NS-MC surface is reduced.The S-VN/Co/NS-MC demonstrates a higher half-wave potential and limiting current density compared to the VN/Co/N-MC.The S-VN/Co/NS-MC-based liquid ZABs display a power density of 195.7 m W cm^(-2),a specific capacity of 815.7 m A h g^(-1),and a cycling stability exceeding 250 h.The S-VN/Co/NS-MC-based flexible ZABs are successfully employed to charge both a smart watch and a mobile phone.This approach holds promise for advancing the commercial utilization of VN-based catalysts in ZABs.展开更多
The surface/interfacial reactivity of clay is a critical factor influencing the sedimentation of coal slurry water.To achieve efficient sedimentation of coal slurry water,this paper introduces a novel approach that re...The surface/interfacial reactivity of clay is a critical factor influencing the sedimentation of coal slurry water.To achieve efficient sedimentation of coal slurry water,this paper introduces a novel approach that regulates the hydrophobicity of defective active sites in clay minerals.Fe^(3+)-doped kaolinite(Fe^(3+)-Kao)was synthesized by hydrothermal methods.Subsequently,tests were conducted on the adsorption capacity,surface wettability,and agglomeration sedimentation of alkyl amine/ammonium salts(AAS)on Fe^(3+)-Kao surfaces.Fe^(3+)doping significantly enhances AAS adsorption and alters surface properties from hydrophilic to hydrophobic,promoting kaolinite particle aggregation and sedimentation,thereby improving coal slurry water treatment efficiency.Molecular dynamics(MD)simulations were performed to analyze the statistical adsorption behavior of AAS on Fe^(3+)-Kao surfaces.The simulation results indicate that the mechanism by which Fe^(3+)doping influences the hydrophobic regulation of kaolinite surfaces is due to the enhanced interfacial interactions between the kaolinite surface and AAS,where the interfacial effects are more pronounced on surfaces closer to the dopant sites.The findings of this research offer valuable insights for future studies on other types of lattice defects in clay minerals,as well as for the development of more efficient treatment chemicals for coal slurry water.展开更多
The wild Lepista sordida is a kind of precious and rare edible fungus.An excellent strain of it by artificial domestication was obtained,which was high-yield and high in iron content.In this study,high-throughput comp...The wild Lepista sordida is a kind of precious and rare edible fungus.An excellent strain of it by artificial domestication was obtained,which was high-yield and high in iron content.In this study,high-throughput comparative proteomics was used to reveal the regulatory mechanism of its primordium differentiation in the early fruiting body formation.The mycelium before the primordium differentiation mainly expressed high levels of mitochondrial functional proteins and carbon dioxide concentration regulatory proteins.In young mushrooms,the highly expressed proteins were mainly involved in cell component generation,cell proliferation,nitrogen compound metabolism,nucleotide metabolism,glutathione metabolism,and purine metabolism.The differential regulation patterns of pileus and stipe growth to maturity were also revealed.The highly expressed proteins related to transcription,RNA splicing,the production of various organelles,DNA conformational change,nucleosome organization,protein processing,maturation and transport,and cell detoxification regulated the pileus development and maturity.The proteins related to carbohydrate and energy metabolism,large amounts of obsolete cytoplasmic parts,nutrient deprivation,and external stimuli regulated the stipe development and maturity.Multiple CAZymes regulated nutrient absorption,morphogenesis,spore production,stress response,and other life activities at different growth and development stages.展开更多
Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in re...Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in recent decades.Among the many products of CO_(2)RR(carbon monoxide,acids,aldehydes and alcohols,olefins,etc.),alcohols(methanol,ethanol,propanol,etc.)have a higher market value and energy density,but it is also more difficult to produce.Copper is known to be effective in catalyzing CO_(2) to high valueadded alcohols,but with poor selectivity.The progress of Cu-based catalysts for the selective generation of alcohols,including copper oxides,bimetals,single atoms and composites is reviewed.Meanwhile,to improve Cu-based catalyst activity and modulate product selectivity,the modulation strategies are straighten out,including morphological regulation,crystalline surface,oxidation state,as well as elemental doping and defect engineering.Based on the research progress of electrocatalytic CO_(2) reduction for alcohol production on Cu-based materials,the reaction pathways and the key intermediates of the electrocatalytic CO_(2)RR to methanol,ethanol and propanol are summarized.Finally,the problems of traditional electrocatalytic CO_(2)RR are introduced,and the future applications of machine learning and theoretical calculations are prospected.An in-depth discussion and a comprehensive review of the reaction mechanism,catalyst types and regulation strategies were carried out with a view to promoting the development of electrocatalytic CO_(2)RR to alcohols.展开更多
Generally,layered Ni-rich cathode materials exhibit the morphology of polycrystalline secondary sphere composed of numerous primary particles.While the arrangement of primary particles plays a very important role in t...Generally,layered Ni-rich cathode materials exhibit the morphology of polycrystalline secondary sphere composed of numerous primary particles.While the arrangement of primary particles plays a very important role in the properties of Ni-rich cathodes.The disordered particle arrangement is harmful to the cyclic performance and structural stability,yet the fundamental understanding of disordered structure on the structural degradation behavior is unclarified.Herein,we have designed three kinds of LiNi_(0.83)Co_(0.06)Mn_(0.11)O_(2) cathode materials with different primary particle orientations by regulating the precursor coprecipitation process.Combining finite element simulation and in-situ characterization,the Li^(+)transport and structure evolution behaviors of different materials are unraveled.Specifically,the smooth Li^(+)diffusion minimizes the reaction heterogeneity,homogenizes the phase transition within grains,and mitigates the anisotropic microstructural change,thereby modulating the crack evolution behavior.Meanwhile,the optimized structure evolution ensures radial tight junctions of the primary particles,enabling enhanced Li^(+)diffusion during dynamic processes.Closed-loop bidirectional enhancement mechanism becomes critical for grain orientation regulation to stabilize the cyclic performance.This precursor engineering with particle orientation regulation provides the useful guidance for the structural design and feature enhancement of Ni-rich layered cathodes.展开更多
All-perovskite tandem solar cells have the potential to surpass the theoretical efficiency limit of single junction solar cells by reducing thermalization losses.However,the challenges encompass the oxidation of Sn^(2...All-perovskite tandem solar cells have the potential to surpass the theoretical efficiency limit of single junction solar cells by reducing thermalization losses.However,the challenges encompass the oxidation of Sn^(2+)to Sn^(4+)and uncontrolled crystallization kinetics in Sn-Pb perovskites,leading to nonradiative recombination and compositional heterogeneity to decrease photovoltaic efficiency and operational stability.Herein,we introduced an ionic liquid additive,1-ethyl-3-methylimidazolium iodide (EMIMI) into Sn-Pb perovskite precursor to form low-dimensional Sn-rich/pure-Sn perovskites at grain boundaries,which mitigates oxidation of Sn^(2+)to Sn^(4+)and regulates the film-forming dynamics of Sn/Pb-based perovskite films.The optimized single-junction Sn-Pb perovskite devices incorporating EMIMI achieved a high efficiency of 22.87%.Furthermore,combined with wide-bandgap perovskite sub-cells in tandem device,we demonstrate 2-terminal all-perovskite tandem solar cells with a power conversion efficiency of 28.34%,achieving improved operational stability.展开更多
Using the 3-year observational data from ChinaFlux （Chinese Terrestrial Ecosystem Flux Research Network）, we studied the gas regulation flux dynamics and cumulative process of gas regulation value in Qianyanzhou mid...Using the 3-year observational data from ChinaFlux （Chinese Terrestrial Ecosystem Flux Research Network）, we studied the gas regulation flux dynamics and cumulative process of gas regulation value in Qianyanzhou middle subtropical plantation （QYF） and Changbai Mountain temperate mixed forest （CBF）. The gas regulation service was differentiated into vegetation gas regulation service and net ecosystem gas regulation service. Carbon tax approach, reforestation cost approach and industrial oxygen approach were employed to calculate gas regulation value. Results show that there was significant seasonal variation in vegetation gas regulation flux. Daily CO2 uptake fluxes averaged 82.00 kg·ha^-·d^-1 and 59.37 kg·ha^-·d^-1 and the corresponding 02 emission fluxes were 59.65 kg·ha^-·d^-1 and 43.19 kg·ha^-·d^-1 for QYF and CBF, respectively. The cumulative curves of vegetation gas regulation value always followed a sigmoid shape, and the annual gas regulation value produced by vegetation was RMB 14342.69 yuan·ha^-1 and RMB 10384.18 yuan·ha^-1 for both QYF and CBF, respectively. In terms of monthly net ecosystem gas regulation service, QYF appeared as a CO2 sink and O2 source for the whole year, while CBF appeared to be a CO2 sink and O2 source mainly in the period between May and September. The cumulative curves of net ecosystem gas regulation value presented a sigmoid （＂S＂） shape for QYF, while a unimodal type curve for CBF. The annual net ecosystem gas regulation value was 8470.52 yuan·ha^-1 and 5091.98yuan·ha^-1 for QYF and CBF, respectively. The economic value of both the vegetation gas regulation service and net ecosystem gas regulation service were mainly produced between May and October.展开更多
The ultrastructural distribution and active location of ATPase and the ultrastructural variations were investigated in mesophyll cells of Cyclocarya paliurus seedlings after iso-osmotic salt/water treatments in combin...The ultrastructural distribution and active location of ATPase and the ultrastructural variations were investigated in mesophyll cells of Cyclocarya paliurus seedlings after iso-osmotic salt/water treatments in combination with calcium regulation. C. paliurus seed- lings were treated with five groups （control, 85 mM NaCl, 85 mM NaCl＋ 12 mM Ca（NO3）2, PEG iso-osmotic to 85 mM NaCl and PEG iso-osmotic to 85 mM NaCl＋12 mM Ca（NO））2） in a hydroponic system in a phytotron. Results show that under normal growth conditions the ATPase activity was low and the enzyme was primarily located on the nucleus. After 12 days of iso-osmotic salt/water treatments, ATPase activity on the tonoptast increased. Osmiophilic globules for iso-osmotic water treatment were greater than that for iso-osmotie salt treatments. The ATPase activity increased and was mostly transferred onto the nucleus for calcium regulation treatment under iso- osmotic salt/water stresses, and the osmiophilic globules significantly decreased under iso-osmotic water stress with calcium regulation. The ATPase located on the nucleus indicated that the degree of salt/drought damage that seedlings suffered was slighter, while the amount of the enzyme located on the tonoplast showed that the degree of salt/drought damage there was more serious. After 4 and 20 days of iso- osmotic treatments, the injury suffered by the leaf ultrastructures of C. paliurus seedlings for iso-osmotic treatment with calcium regula- tion was lower than those without calcium regulation, especially for the iso-osmotic water treatments. Preliminary analysis suggests that the iniury suffered by C. paliurus seedlings was lower for iso-osmotic salt treatments than for iso-osmotic water treatments, while the effect of calcium regulation under iso-osmotic water stress was greater than that of the iso-osmotic salt stress.展开更多
After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively sho...After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively short term.This paper reviewed the asymmetric regulation policies and practices carried out in foreign telecom market,and then according to the specific situations of Chinese telecom market,proposed the principles and corresponding policies for establishing an asymmetric regulation system fit for Chinese telecom market.展开更多
Programmed cell death protein 1(PD-1)/programmed death ligand 1(PD-L1)is a significant immune checkpoint,and the dysfunction of this axis contributes to tumor metastasis and immune escape.PI3K/Akt/mTOR and MAPK signal...Programmed cell death protein 1(PD-1)/programmed death ligand 1(PD-L1)is a significant immune checkpoint,and the dysfunction of this axis contributes to tumor metastasis and immune escape.PI3K/Akt/mTOR and MAPK signal network induces PD-1/PD-L1 expression and facilitates tumor progression.Transcriptional factors such as hypoxia induced factors,PTEN,p53,CDK5,BRD4,STAT modulate PD-1/PDL1 expression.PD-1/PD-L1 level is also regulated via epigenetic and post-translational manner.The underlying mechanisms mentioned above may provide potential targets for tumor treatment.At present,the combination therapy of PD-1/PD-L1 monoclonal antibodies plus small molecular inhibitors has achieved good outcomes in tumor treatment.展开更多
Korean pine（Pinus koraiensis） and broadleaved mixed forest in Northeast China has been changed regressively into secondary forest with almost no conifers.Planting Korean pine trees under the canopy of secondary fore...Korean pine（Pinus koraiensis） and broadleaved mixed forest in Northeast China has been changed regressively into secondary forest with almost no conifers.Planting Korean pine trees under the canopy of secondary forest is a feasible approach for recovering Korean pine and broadleaved mixed forest.For establishing an effective growth promotion method for under-canopy planted young Korean pine trees,two stands were selected as the experiment plots,Stand A（planted in 1989） and Stand B（planted in 1982）,and an experiment of microenvironment regulation was conducted relying mainly on Opening degree（K=1,K=1.5,K=2,CK） in 2004.The results were shown that the adjustment had promoted growth of diameter and height of Korean pine planted in Stand A and Stand B,and had a significant influence on the growth rate of basal diameter,diameter at breast height and height in the two growth stands.The four years periodic increment of mean diameter and height of Korean pine planted in 1989 and in 1982 after regulation in K=1 level were 63.4%（D0） and 82.7%（H）,64.8%（D1.3） and 69.7%（H） higher than that of control respectively.Quantitative regulation had significant influence on specific leaf area of Korean pine planted in 1989,and the current year specific leaf area（SLA） was lager than perennial year SLA.Quality indexes of natural pruning capacity,normal form quotient and crown size was not significantly changed but shown a positive tendency.The regulation scheme of Opening degree K=1 might be proper for adjusting the microenvironment of Korean pine trees planted under the canopy of secondary forest when the Korean pine trees were in the growth period of 15 to 26 years old in the experiment region.展开更多
Solid electrolyte interphase(SEI)has been widely recognized as the most important and the least understood component in lithium batteries.Considering the intrinsic instability in both chemical and mechanical,the failu...Solid electrolyte interphase(SEI)has been widely recognized as the most important and the least understood component in lithium batteries.Considering the intrinsic instability in both chemical and mechanical,the failure of SEI is inevitable and strongly associated with the performance decay of practical working batteries.In this Review,the failure mechanisms and the corresponding regulation strategies of SEI are focused.Firstly,the fundamental properties of SEI,including the formation principles,and the typical composition and structures are briefly introduced.Moreover,the common SEI failure modes involving thermal failure,chemical failure,and mechanical failure are classified and discussed,respectively.Beyond that,the regulation strategies of SEI with respect to different failure modes are further concluded.Finally,the future endeavor in further disclosing the mysteries of SEI is prospected.展开更多
The Zn/Sn ratio in Cu2ZnSn（S, Se）4 （CZTSSe） films has been regulated to control the composition-related phase, defect, and photoelectric properties for high performance kesterite solar cells. It is found that the ...The Zn/Sn ratio in Cu2ZnSn（S, Se）4 （CZTSSe） films has been regulated to control the composition-related phase, defect, and photoelectric properties for high performance kesterite solar cells. It is found that the increase in the Zn/Sn ratio can slightly narrow the energy band gap to extend the light absorption range and improve the photocurrent. Optimal Zn/Sn ratio of 1.39 in CZTSSe film is obtained with the least secondary phase, the lowest defect density, and the longest charge recombination lifetime. Up to 10.1% photoelectric conversion efficiency has been achieved by this composition regulation.展开更多
基金financially supported by the National Natural Science Foundation of China(U21A2078,22179042,and 12104170)the Natural Science Foundation of Fujian Province(2020J06021 and 2020J01064)Scientific Research Funds of Huaqiao University(23BS109)。
文摘Lead iodide(PbI2) is a vital raw material for preparing perovskite solar cells(PSCs),and it not only takes part in forming the light absorption layer but also remains in the grain boundary as a passivator.In other words,the PbI2 content in the precursor and as formed film will affect the efficiency and stability of the PSCs.With moderate residual PbI2,it passivates the bulk/surface defects of perovskite,reduces the interfacial recombination,promotes the perovskite stability,minimizes the device hysteresis,and so on.Deficient PbI2 residue will reduce the interfacial passivation effect and device performance.In addition to facilitating the non-radiative recombination,over PbI2 residue can also lead to electronic insulation in the grain boundary and deteriorate the device performance.However,the impact and regulation of PbI2 residue on the device performance and stability is still not fully understood.Herein,a comprehensive and detailed review is presented by discussing the PbI2 residue impact and its regulation strategies(i.e., elimination,facilitation and conversion of the residue PbI2) to manipulate the PbI2 content,distribution and forms.Finally,we also show future outlooks in this field,with an aim to help further the progression of high-efficiency and stable PSCs.
基金supported by the National Natural Science Foundation of China(52177217)。
文摘Typical application scenarios,such as vehicle to grid(V2G)and frequency regulation,have imposed significant long-life demands on lithium-ion batteries.Herein,we propose an advanced battery life-extension method employing bidirectional pulse charging(BPC)strategy.Unlike traditional constant current charging methods,BPC strategy not only achieves comparable charging speeds but also facilitates V2G frequency regulation simultaneously.It significantly enhances battery cycle ampere-hour throughput and demonstrates remarkable life extension capabilities.For this interesting conclusion,adopting model identification and postmortem characterization to reveal the life regulation mechanism of BPC:it mitigates battery capacity loss attributed to loss of lithium-ion inventory(LLI)in graphite anodes by intermittently regulating the overall battery voltage and anode potential using a negative charging current.Then,from the perspective of internal side reaction,the life extension mechanism is further revealed as inhibition of solid electrolyte interphase(SEI)and lithium dendrite growth by regulating voltage with a bidirectional pulse current,and a semi-empirical life degradation model combining SEI and lithium dendrite growth is developed for BPC scenarios health management,the model parameters are identified by genetic algorithm with the life simulation exhibiting an accuracy exceeding 99%.This finding indicates that under typical rate conditions,adaptable BPC strategies can extend the service life of LFP battery by approximately 123%.Consequently,the developed advanced BPC strategy offers innovative perspectives and insights for the development of long-life battery applications in the future.
基金the National Natural Science Foundation of China(Nos.51988101 and 42007262).
文摘3D printing is widely adopted to quickly produce rock mass models with complex structures in batches,improving the consistency and repeatability of physical modeling.It is necessary to regulate the mechanical properties of 3D-printed specimens to make them proportionally similar to natural rocks.This study investigates mechanical properties of 3D-printed rock analogues prepared by furan resin-bonded silica sand particles.The mechanical property regulation of 3D-printed specimens is realized through quantifying its similarity to sandstone,so that analogous deformation characteristics and failure mode are acquired.Considering similarity conversion,uniaxial compressive strength,cohesion and stress–strain relationship curve of 3D-printed specimen are similar to those of sandstone.In the study ranges,the strength of 3D-printed specimen is positively correlated with the additive content,negatively correlated with the sand particle size,and first increases then decreases with the increase of curing temperature.The regulation scheme with optimal similarity quantification index,that is the sand type of 70/140,additive content of 2.5‰and curing temperature of 81.6℃,is determined for preparing 3D-printed sandstone analogues and models.The effectiveness of mechanical property regulation is proved through uniaxial compression contrast tests.This study provides a reference for preparing rock-like specimens and engineering models using 3D printing technology.
基金supported by the National Natural Science Foundation of China (22002046 and 22379119)the Qin Chuangyuan High-level Innovative and Entrepreneurial Talent Program of Shaanxi Province (QCYRCXM-2023-045)+1 种基金the Youth Talent Support Program of Xi’an Association for Science and Technology (959202313070)the Young Top-notch Talent Program of Xi’an Jiaotong University (HG6J028)。
文摘The in-situ generated oxyanions at electrochemically reconstructed catalysts from metal-based nonoxide compounds have been proven to significantly accelerate oxygen evolution reaction(OER)kinetics.However,it remains a challenge to retain these self-released oxyanions at reconstructed catalysts,hindering its utilization as a tool to develop efficient OER catalysts.Here,we demonstrate a versatile selftransformed carbonate regulation strategy to efficiently retain the self-released chalcogenate at Co oxyhydroxides reconstructed from carbon-incorporated Co selenides under OER conditions.These selftransformed CO_(3)^(2-)can induce electron accumulation and narrow d bond at Co sites to facilitate the Co3d-O 2p orbital hybridization between Co sites and SeO_(x)^(2-)for enhanced SeO_(x)^(2-)retention,which can accelerate the rate-limiting step for^(*)OOH formation during OER.Relative to CoOOH-SeO_(x)^(2-)with limited SeO_(x)^(2-)residues,CoOOH-CO_(3)^(2-)/SeO_(x)^(2-)with elevated SeO_(x)^(2-)retention by CO_(3)^(2-)regulation exhibited a 5.6-fold increase in current density and a remarkable lower Tafel slope towards OER.This strategy paves a rational avenue to design efficient catalysts for electrooxidation reactions through finely regulating self-released oxyanions at reconstructed structures.
文摘This paper presents the design and verification of the dual-mode core driven fan stage(CDFS)and high-load compressor with a large flow regulation range.In view of the characteristics of large flow regulation range of the two modes and high average stage load coefficient,this paper investigates the design technology of the dual-mode high-efficiency compressor with a large flow regulation range and high-load compressor with an average stage load coefficient of 0.504.Building upon this research,the design of the dual-mode CDFS and four-stage compressor is completed,and three-dimensional numerical simulation of the two modes is carried out.Finally,performance experiment is conducted to verify the result of three-dimensional numerical simulation.The experiment results show that the compressor performance is improved for the whole working conditions by using the new design method,which realizes the complete fusion design of the CDFS and high-pressure compressor(HPC).The matching mechanism of stage characteristics of single and double bypass modes and the variation rule of different adjustment angles on performance are studied comprehensively.Furthermore,it effectively reduces the length and weight of compressor,and breaks through the key technologies such as high-load compressor with the average load factor of 0.504.These findings provide valuable data and a methodological foundation for the development of the next generation aeroengine.
基金supported by the National Key Research and Development Program of China(2022YFF1102500)the Special Project of Central Guide to Local Science and Technology Development(Innovation platform construction for food green processing technology and intelligent equipment)(2022BGE247).
文摘The global shift towards sustainable food systems has sparked innovations in food sources and production systems,including cell-based meat,plant-based food products,precision fermentation,and 3D food printing.These advancements pose regulatory challenges and opportunities,with China emerging as a critical player in adopting and regulating new food technologies.This review explores the international landscape of new food sources and production systems(NFPS),focusing on China’s role and regulatory approaches compared to global practices.Through this comparative analysis,we aim to contribute to the ongoing dialogue on food safety regulation,offering insights and recommendations for policymakers,industry stakeholders,and researchers engaged in the global food system’s evolution.This comprehensive overview underscores the dynamic nature of regulatory frameworks governing NFPS,highlighting the international efforts to ensure food safety,consumer protection,and the sustainable evolution of the food industry.
基金supported by the National Natural Science Foundation of China(Grant Nos.12274307,32230063,21774092,and 12347102)the Basic and Applied Basic Research Foundation of Guangdong Province,China(Grant No.2023A1515011610).
文摘Membrane tension plays a crucial role in various fundamental cellular processes,with one notable example being the T cell-mediated elimination of tumor cells through perforin-induced membrane perforation by amplifying cellular force.However,the mechanisms governing the regulation of biomolecular activities at the cell interface by membrane tension remain elusive.In this study,we investigated the correlation between membrane tension and poration activity of melittin,a prototypical pore-forming peptide,using dynamic giant unilamellar vesicle leakage assays combined with flickering tension analysis,molecular dynamics simulations,and live cell assays.The results demonstrate that an increase in membrane tension enhances the activity of melittin,particularly near its critical pore-forming concentration.Moreover,peptide actions such as binding,insertion,and aggregation in the membrane further influence the evolution of membrane tension.Live cell experiments reveal that artificially enhancing membrane tension effectively enhances melittin’s ability to induce pore formation and disrupt membranes,resulting in up to a ten-fold increase in A549 cell mortality when exposed to a concentration of 2.0-μg·mL^(-1)melittin.Our findings elucidate the relationship between membrane tension and the mechanism of action as well as pore-forming efficiency of melittin,while providing a practical mechanical approach for regulating functional activity of molecules at the cell-membrane interface.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.22178148,22278193,22075113)the Jiangsu Province and Education Ministry Co-Sponsored Synergistic Innovation Center of Modern Agricultural Equipment(Grant No.XTCX2029)+1 种基金a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX22_3691)。
文摘Owing to the distinctive structural characteristics,vanadium nitride(VN)is highly regarded as a catalyst for oxygen reduction reaction(ORR)in zinc-air batteries(ZABs).However,VN exhibits limited intrinsic ORR activity due to the weak adsorption ability to O-containing species.Here,the S-doped VN anchored on N,S-doped multi-dimensional carbon(S-VN/Co/NS-MC)was constructed using the solvothermal and in-situ doping methods.Incorporating sulfur atoms into VN species alters the electron spin state of vanadium in the S-VN/Co/NS-MC for regulating the adsorption energy of vanadium sites to oxygen molecules.The introduced sulfur atoms polarize the V 3d_(z)^(2) electrons,shifting spin-down electrons closer to the Fermi level in the S-VN/Co/NS-MC.Consequently,the introduction of sulfur atoms into VN species enhances the adsorption energy of vanadium sites for oxygen molecules.The*OOH dissociation transitions from being unspontaneous on the VN surface to a spontaneous state on the S-doped VN surface.Then,the ORR barrier on the S-VN/Co/NS-MC surface is reduced.The S-VN/Co/NS-MC demonstrates a higher half-wave potential and limiting current density compared to the VN/Co/N-MC.The S-VN/Co/NS-MC-based liquid ZABs display a power density of 195.7 m W cm^(-2),a specific capacity of 815.7 m A h g^(-1),and a cycling stability exceeding 250 h.The S-VN/Co/NS-MC-based flexible ZABs are successfully employed to charge both a smart watch and a mobile phone.This approach holds promise for advancing the commercial utilization of VN-based catalysts in ZABs.
基金supported by the National key research and development Program of China(No.2023YFE0100600)the National Natural Science Foundation of China(Nos.52174233 and 52474282)the Natural Science Research Project of Anhui Educational Committee(No.2022AH030083)。
文摘The surface/interfacial reactivity of clay is a critical factor influencing the sedimentation of coal slurry water.To achieve efficient sedimentation of coal slurry water,this paper introduces a novel approach that regulates the hydrophobicity of defective active sites in clay minerals.Fe^(3+)-doped kaolinite(Fe^(3+)-Kao)was synthesized by hydrothermal methods.Subsequently,tests were conducted on the adsorption capacity,surface wettability,and agglomeration sedimentation of alkyl amine/ammonium salts(AAS)on Fe^(3+)-Kao surfaces.Fe^(3+)doping significantly enhances AAS adsorption and alters surface properties from hydrophilic to hydrophobic,promoting kaolinite particle aggregation and sedimentation,thereby improving coal slurry water treatment efficiency.Molecular dynamics(MD)simulations were performed to analyze the statistical adsorption behavior of AAS on Fe^(3+)-Kao surfaces.The simulation results indicate that the mechanism by which Fe^(3+)doping influences the hydrophobic regulation of kaolinite surfaces is due to the enhanced interfacial interactions between the kaolinite surface and AAS,where the interfacial effects are more pronounced on surfaces closer to the dopant sites.The findings of this research offer valuable insights for future studies on other types of lattice defects in clay minerals,as well as for the development of more efficient treatment chemicals for coal slurry water.
基金funded by the Shandong Edible Fungus Agricultural Technology System(SDAIT-07-02)the National Natural Science Foundation of China(Grant No.32000041 and 32272789)+2 种基金the Shandong Provincial Natural Science Foundation,China(ZR2020QC005)the Qingdao Agricultural University Scientific Research Foundation(6631120076)horizontal project:Breeding and property protection of new varieties of factory produced Hypsizygus marmoreus(20183702012614).
文摘The wild Lepista sordida is a kind of precious and rare edible fungus.An excellent strain of it by artificial domestication was obtained,which was high-yield and high in iron content.In this study,high-throughput comparative proteomics was used to reveal the regulatory mechanism of its primordium differentiation in the early fruiting body formation.The mycelium before the primordium differentiation mainly expressed high levels of mitochondrial functional proteins and carbon dioxide concentration regulatory proteins.In young mushrooms,the highly expressed proteins were mainly involved in cell component generation,cell proliferation,nitrogen compound metabolism,nucleotide metabolism,glutathione metabolism,and purine metabolism.The differential regulation patterns of pileus and stipe growth to maturity were also revealed.The highly expressed proteins related to transcription,RNA splicing,the production of various organelles,DNA conformational change,nucleosome organization,protein processing,maturation and transport,and cell detoxification regulated the pileus development and maturity.The proteins related to carbohydrate and energy metabolism,large amounts of obsolete cytoplasmic parts,nutrient deprivation,and external stimuli regulated the stipe development and maturity.Multiple CAZymes regulated nutrient absorption,morphogenesis,spore production,stress response,and other life activities at different growth and development stages.
基金supported by the Fundamental Research Funds for the Central Universities (FRF-EYIT-23-07)。
文摘Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in recent decades.Among the many products of CO_(2)RR(carbon monoxide,acids,aldehydes and alcohols,olefins,etc.),alcohols(methanol,ethanol,propanol,etc.)have a higher market value and energy density,but it is also more difficult to produce.Copper is known to be effective in catalyzing CO_(2) to high valueadded alcohols,but with poor selectivity.The progress of Cu-based catalysts for the selective generation of alcohols,including copper oxides,bimetals,single atoms and composites is reviewed.Meanwhile,to improve Cu-based catalyst activity and modulate product selectivity,the modulation strategies are straighten out,including morphological regulation,crystalline surface,oxidation state,as well as elemental doping and defect engineering.Based on the research progress of electrocatalytic CO_(2) reduction for alcohol production on Cu-based materials,the reaction pathways and the key intermediates of the electrocatalytic CO_(2)RR to methanol,ethanol and propanol are summarized.Finally,the problems of traditional electrocatalytic CO_(2)RR are introduced,and the future applications of machine learning and theoretical calculations are prospected.An in-depth discussion and a comprehensive review of the reaction mechanism,catalyst types and regulation strategies were carried out with a view to promoting the development of electrocatalytic CO_(2)RR to alcohols.
基金supported by National Natural Science Foundation of China (52070194,52073309)Natural Science Foundation of Hunan Province (2022JJ20069)。
文摘Generally,layered Ni-rich cathode materials exhibit the morphology of polycrystalline secondary sphere composed of numerous primary particles.While the arrangement of primary particles plays a very important role in the properties of Ni-rich cathodes.The disordered particle arrangement is harmful to the cyclic performance and structural stability,yet the fundamental understanding of disordered structure on the structural degradation behavior is unclarified.Herein,we have designed three kinds of LiNi_(0.83)Co_(0.06)Mn_(0.11)O_(2) cathode materials with different primary particle orientations by regulating the precursor coprecipitation process.Combining finite element simulation and in-situ characterization,the Li^(+)transport and structure evolution behaviors of different materials are unraveled.Specifically,the smooth Li^(+)diffusion minimizes the reaction heterogeneity,homogenizes the phase transition within grains,and mitigates the anisotropic microstructural change,thereby modulating the crack evolution behavior.Meanwhile,the optimized structure evolution ensures radial tight junctions of the primary particles,enabling enhanced Li^(+)diffusion during dynamic processes.Closed-loop bidirectional enhancement mechanism becomes critical for grain orientation regulation to stabilize the cyclic performance.This precursor engineering with particle orientation regulation provides the useful guidance for the structural design and feature enhancement of Ni-rich layered cathodes.
基金National Key Research and Development Program of China (2022YFB420030)National Natural Science Foundation of China (2227903)+1 种基金Innovation Project of Optics Valley Laboratory (OVL2021BG008)Foundation of State Key Laboratory of New Textile Materials and Advanced Processing Technologies (FZ2021011)。
文摘All-perovskite tandem solar cells have the potential to surpass the theoretical efficiency limit of single junction solar cells by reducing thermalization losses.However,the challenges encompass the oxidation of Sn^(2+)to Sn^(4+)and uncontrolled crystallization kinetics in Sn-Pb perovskites,leading to nonradiative recombination and compositional heterogeneity to decrease photovoltaic efficiency and operational stability.Herein,we introduced an ionic liquid additive,1-ethyl-3-methylimidazolium iodide (EMIMI) into Sn-Pb perovskite precursor to form low-dimensional Sn-rich/pure-Sn perovskites at grain boundaries,which mitigates oxidation of Sn^(2+)to Sn^(4+)and regulates the film-forming dynamics of Sn/Pb-based perovskite films.The optimized single-junction Sn-Pb perovskite devices incorporating EMIMI achieved a high efficiency of 22.87%.Furthermore,combined with wide-bandgap perovskite sub-cells in tandem device,we demonstrate 2-terminal all-perovskite tandem solar cells with a power conversion efficiency of 28.34%,achieving improved operational stability.
基金Chinese Terrestrial Ecosystem Flux Observational Research Network(ChinaFlux) for providing the observational data
文摘Using the 3-year observational data from ChinaFlux （Chinese Terrestrial Ecosystem Flux Research Network）, we studied the gas regulation flux dynamics and cumulative process of gas regulation value in Qianyanzhou middle subtropical plantation （QYF） and Changbai Mountain temperate mixed forest （CBF）. The gas regulation service was differentiated into vegetation gas regulation service and net ecosystem gas regulation service. Carbon tax approach, reforestation cost approach and industrial oxygen approach were employed to calculate gas regulation value. Results show that there was significant seasonal variation in vegetation gas regulation flux. Daily CO2 uptake fluxes averaged 82.00 kg·ha^-·d^-1 and 59.37 kg·ha^-·d^-1 and the corresponding 02 emission fluxes were 59.65 kg·ha^-·d^-1 and 43.19 kg·ha^-·d^-1 for QYF and CBF, respectively. The cumulative curves of vegetation gas regulation value always followed a sigmoid shape, and the annual gas regulation value produced by vegetation was RMB 14342.69 yuan·ha^-1 and RMB 10384.18 yuan·ha^-1 for both QYF and CBF, respectively. In terms of monthly net ecosystem gas regulation service, QYF appeared as a CO2 sink and O2 source for the whole year, while CBF appeared to be a CO2 sink and O2 source mainly in the period between May and September. The cumulative curves of net ecosystem gas regulation value presented a sigmoid （＂S＂） shape for QYF, while a unimodal type curve for CBF. The annual net ecosystem gas regulation value was 8470.52 yuan·ha^-1 and 5091.98yuan·ha^-1 for QYF and CBF, respectively. The economic value of both the vegetation gas regulation service and net ecosystem gas regulation service were mainly produced between May and October.
基金supported by the National Natural Science Foundation of China (Project No: 30371156)Research Foundation of Jiangsu Province (Project No: BG2006314)
文摘The ultrastructural distribution and active location of ATPase and the ultrastructural variations were investigated in mesophyll cells of Cyclocarya paliurus seedlings after iso-osmotic salt/water treatments in combination with calcium regulation. C. paliurus seed- lings were treated with five groups （control, 85 mM NaCl, 85 mM NaCl＋ 12 mM Ca（NO3）2, PEG iso-osmotic to 85 mM NaCl and PEG iso-osmotic to 85 mM NaCl＋12 mM Ca（NO））2） in a hydroponic system in a phytotron. Results show that under normal growth conditions the ATPase activity was low and the enzyme was primarily located on the nucleus. After 12 days of iso-osmotic salt/water treatments, ATPase activity on the tonoptast increased. Osmiophilic globules for iso-osmotic water treatment were greater than that for iso-osmotie salt treatments. The ATPase activity increased and was mostly transferred onto the nucleus for calcium regulation treatment under iso- osmotic salt/water stresses, and the osmiophilic globules significantly decreased under iso-osmotic water stress with calcium regulation. The ATPase located on the nucleus indicated that the degree of salt/drought damage that seedlings suffered was slighter, while the amount of the enzyme located on the tonoplast showed that the degree of salt/drought damage there was more serious. After 4 and 20 days of iso- osmotic treatments, the injury suffered by the leaf ultrastructures of C. paliurus seedlings for iso-osmotic treatment with calcium regula- tion was lower than those without calcium regulation, especially for the iso-osmotic water treatments. Preliminary analysis suggests that the iniury suffered by C. paliurus seedlings was lower for iso-osmotic salt treatments than for iso-osmotic water treatments, while the effect of calcium regulation under iso-osmotic water stress was greater than that of the iso-osmotic salt stress.
文摘After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively short term.This paper reviewed the asymmetric regulation policies and practices carried out in foreign telecom market,and then according to the specific situations of Chinese telecom market,proposed the principles and corresponding policies for establishing an asymmetric regulation system fit for Chinese telecom market.
文摘Programmed cell death protein 1(PD-1)/programmed death ligand 1(PD-L1)is a significant immune checkpoint,and the dysfunction of this axis contributes to tumor metastasis and immune escape.PI3K/Akt/mTOR and MAPK signal network induces PD-1/PD-L1 expression and facilitates tumor progression.Transcriptional factors such as hypoxia induced factors,PTEN,p53,CDK5,BRD4,STAT modulate PD-1/PDL1 expression.PD-1/PD-L1 level is also regulated via epigenetic and post-translational manner.The underlying mechanisms mentioned above may provide potential targets for tumor treatment.At present,the combination therapy of PD-1/PD-L1 monoclonal antibodies plus small molecular inhibitors has achieved good outcomes in tumor treatment.
基金supported by the Project of AGRFUND from Ministry of Science and Technology of the People's Republic of China (Project No. 2007GB24320427)
文摘Korean pine（Pinus koraiensis） and broadleaved mixed forest in Northeast China has been changed regressively into secondary forest with almost no conifers.Planting Korean pine trees under the canopy of secondary forest is a feasible approach for recovering Korean pine and broadleaved mixed forest.For establishing an effective growth promotion method for under-canopy planted young Korean pine trees,two stands were selected as the experiment plots,Stand A（planted in 1989） and Stand B（planted in 1982）,and an experiment of microenvironment regulation was conducted relying mainly on Opening degree（K=1,K=1.5,K=2,CK） in 2004.The results were shown that the adjustment had promoted growth of diameter and height of Korean pine planted in Stand A and Stand B,and had a significant influence on the growth rate of basal diameter,diameter at breast height and height in the two growth stands.The four years periodic increment of mean diameter and height of Korean pine planted in 1989 and in 1982 after regulation in K=1 level were 63.4%（D0） and 82.7%（H）,64.8%（D1.3） and 69.7%（H） higher than that of control respectively.Quantitative regulation had significant influence on specific leaf area of Korean pine planted in 1989,and the current year specific leaf area（SLA） was lager than perennial year SLA.Quality indexes of natural pruning capacity,normal form quotient and crown size was not significantly changed but shown a positive tendency.The regulation scheme of Opening degree K=1 might be proper for adjusting the microenvironment of Korean pine trees planted under the canopy of secondary forest when the Korean pine trees were in the growth period of 15 to 26 years old in the experiment region.
基金supported by the Beijing Natural Science Foundation(JQ20004,L182021)the National Natural Science Foundation of China(21808124)the National Key Research and Development Program(2016YFA0202500)。
文摘Solid electrolyte interphase(SEI)has been widely recognized as the most important and the least understood component in lithium batteries.Considering the intrinsic instability in both chemical and mechanical,the failure of SEI is inevitable and strongly associated with the performance decay of practical working batteries.In this Review,the failure mechanisms and the corresponding regulation strategies of SEI are focused.Firstly,the fundamental properties of SEI,including the formation principles,and the typical composition and structures are briefly introduced.Moreover,the common SEI failure modes involving thermal failure,chemical failure,and mechanical failure are classified and discussed,respectively.Beyond that,the regulation strategies of SEI with respect to different failure modes are further concluded.Finally,the future endeavor in further disclosing the mysteries of SEI is prospected.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51627803,51402348,51421002,51372270,and 51372272)the Knowledge Innovation Program of the Chinese Academy of Sciences
文摘The Zn/Sn ratio in Cu2ZnSn（S, Se）4 （CZTSSe） films has been regulated to control the composition-related phase, defect, and photoelectric properties for high performance kesterite solar cells. It is found that the increase in the Zn/Sn ratio can slightly narrow the energy band gap to extend the light absorption range and improve the photocurrent. Optimal Zn/Sn ratio of 1.39 in CZTSSe film is obtained with the least secondary phase, the lowest defect density, and the longest charge recombination lifetime. Up to 10.1% photoelectric conversion efficiency has been achieved by this composition regulation.
