The study of non-axisymmetric fuel dispersal and detonation can provide reference for the prevention of industrial cloud explosion accidents and the design of fuel air explosive(FAE).The concentration and detonation f...The study of non-axisymmetric fuel dispersal and detonation can provide reference for the prevention of industrial cloud explosion accidents and the design of fuel air explosive(FAE).The concentration and detonation fields of 85 kg cylindrical and fan-shaped fuel are investigated by experiments and numerical simulations.A dynamic model of the whole process for fuel dispersal and detonation is built.The concentration distribution of fuel is used as the initial condition to calculate the detonation stage,thus solving the initial value problem of detonation field.The phase and component changes of fuel cloud at different locations are compared.The fuel cloud is divided into directions of 0°,90°,135°and 180°.The results show that the maximum cloud radius is 20.94 m in 135°and the minimum is 12.04 m in 0°.The diameter of the detonation fireball is 53.6 m,and the peak temperature is 3455 K.The highest peak overpressure is 3.44 MPa in 0°and the lowest is 2.97 MPa in 135°.The proportion of liquid phase in 0°is22.90%,and the fuel loss is 11.8% and 9% higher than that in 135°and cylindrical charge,respectively.The stable propagation distance of blast wave in 135°is 42.50% longer than 0°and 28.37% longer than cylindrical charge.展开更多
Aim To quantitatively study three characteristics of the Weibull distribution. Methods Theoritical analysis of the three characteristics of parameters of the Weibull distribution was done and mathematics software wa...Aim To quantitatively study three characteristics of the Weibull distribution. Methods Theoritical analysis of the three characteristics of parameters of the Weibull distribution was done and mathematics software was used to make some chart analysis. Results 17 equations and 7 figures were made. Conclusion Under the standard form, the class of the Weibull probable density founction(pdf) curves appear double peak shape. Under the standard form, the maximum value point curve of the Weibull pdf takes line t =0 and t=1 as asymptotes. When β = 3 30-3 40, the Weibull distribution is the most similar to the normal distribution.展开更多
In order to make reconfigurable manufacturing system （RMS） adapt to the fluctuations of production demand with the minimum number of reconflgurations in its full life cycle, we presented a method to design RMS based...In order to make reconfigurable manufacturing system （RMS） adapt to the fluctuations of production demand with the minimum number of reconflgurations in its full life cycle, we presented a method to design RMS based on the balanced distribution of functional characteristics for ma- chines. With this method, functional characteristics were classified based on machining functions of cutting-tools and machining accuracy of machines. Then the optimization objective was set as the to- tal shortest mobile distance that all the workpieces are moved from one machine to another, and an improved genetic algorithm （GA） was proposed to optimize the configuration. The elitist strategy was used to enhance the global optimization ability of GA, and excellent gene pool was designed to maintain the diversity of population. Software Matlab was used to realize the algorithm, and a case study of simulation was used to evaluate the method.展开更多
Employing theory on vehicle-track coupled dynamics, the equation of motion of a vehicle-track vertical coupled system was established by combining frequency analysis and symplectic mathematics. The frequency response ...Employing theory on vehicle-track coupled dynamics, the equation of motion of a vehicle-track vertical coupled system was established by combining frequency analysis and symplectic mathematics. The frequency response of the vehicle-track vertical coupled system was calculated under the excitation of the German low-interfer- ence spectrum, and the effects of the vehicle speed, vehicle suspension parameters, and track support parameters on the frequency response of the coupled system were studied. Results show that, under the excitation of the German low- interference spectrum, the vertical vibration of the car body is mainly concentrated in the low-frequency band, while that of the bogie has a wide frequency distribution, being strong from several Hertz to dozens of Hertz. The vertical vibrations of the wheel-rail force, wheelset, and track structure mainly occur at a frequency of dozens of Hertz. In general, the vertical vibration of the vehicle-track coupled system increases with vehicle speed, and the vertical vibrations of the car body and bogie obviously shift to higher frequency. Increasing the vehicle suspension stiffness increases the low- frequency vibrations of the vehicle system and track struc- ture. With an increase in vehicle suspension damping, the low-frequency vibrations of the car body and bogie and the vibrations of the wheel-rail vertical force and track structure decrease at 50-80 Hz, while the mid-frequency and high- frequency vibrations of the car body and bogie increase. Similarly, an increase in track stiffness amplifies the vertical vibrations of the wheel-rail force and track structure, while an increase in track damping effectively reduces the vertical vibrations of the wheel-rail vertical force and track structure.展开更多
For establishing the equation of the capacitive target detection accurately, the distributing characteristics of the charges on the bomb body with capacitance fuze were explored. Continuous charges were analyzed disp...For establishing the equation of the capacitive target detection accurately, the distributing characteristics of the charges on the bomb body with capacitance fuze were explored. Continuous charges were analyzed dispersively. Based on the Coulomb's law, the dynamic equilibrium equations of the inducing charges on the bomb body were set up. For the four cases of d 0/L (the ratio between the electrode distance and the bomb length), the curves of the charge's distribution were given. It was concluded that: ① the charge density decreases steadily from the end near the frontal electrode to the bomb tail; ② the declining rate of the density is governed by d 0/L , the larger the value of d 0/L ,the higher the declining rate, and vice versa.展开更多
The spatial distributions of the electron density and the mean electron energy of argon radio frequency （rf） glow discharge plasma in a plasma-enhanced chemical vapour deposition （PECVD） system have been investiga...The spatial distributions of the electron density and the mean electron energy of argon radio frequency （rf） glow discharge plasma in a plasma-enhanced chemical vapour deposition （PECVD） system have been investigated using an established movable Langmuir probe. The results indicate that in the axial direction the electron density tends to peak at midway between the two electrodes while the axial variation trend of mean electron energy is different from that of the electron density, the mean electron energy is high near the electrodes. And the mean electron energy near the cathode is much higher than that near the anode. This article focuses on the radial distribution of electron density and mean electron energy. A proposed theoretical model distribution agrees well with the experimental one： the electron density and the mean electron energy both increase from the centre of the glow to the edge of electrodes. This is useful for better understanding the discharge mechanism and searching for a better deposition condition to improve thin film quality.展开更多
The probability distributions of wave characteristics from three groups of sampled ocean data with different significant wave heights have been analyzed using two transformation functions estimated by non-parametric a...The probability distributions of wave characteristics from three groups of sampled ocean data with different significant wave heights have been analyzed using two transformation functions estimated by non-parametric and parametric methods. The marginal wave characteristic distribution and the joint density of wave properties have been calculated using the two transformations, with the results and accuracy of both transformations presented here. The two transformations deviate slightly between each other for the calculation of the crest and trough height marginal wave distributions, as well as the joint densities of wave amplitude with other wave properties. The transformation methods for the calculation of the wave crest and trough height distributions are shown to provide good agreement with real ocean data. Our work will help in the determination of the most appropriate transformation procedure for the prediction of extreme values.展开更多
Based on detailed investigation of the modern sedimentation of the distributive fluvial system of Shule River and the data of unmanned aerial vehicle(UAV)aerial photography and satellite remote sensing,the sedimentary...Based on detailed investigation of the modern sedimentation of the distributive fluvial system of Shule River and the data of unmanned aerial vehicle(UAV)aerial photography and satellite remote sensing,the sedimentary characteristics and differences of distributive fluvial system in arid areas are analyzed.By comparing the changes in slope,river morphology and sedimentary characteristics in different sections from the apex to the toe,the distributive fluvial system of Shule River can be divided into three facies belts:"proximal","middle"and"distal".The proximal belt has the largest slope and strongest hydrodynamic condition,mainly appears as large-scale braided river deposits;the fluvial bars in this belt are mainly composed of gravels,the gravels have good roundness and certain directionality,and are medium-large boulders,with low sand content;the main microfacies in this belt are braided channel and flood plain.The middle belt with slope smaller than the proximal belt,is mainly composed of braided bifurcating river deposits.Due to branching and infiltration,this belt has weaker hydrodynamic conditions,so some of the distributive rivers dry up,appearing as ephemeral rivers.This belt has small lenticular sandbodies,fine to medium gravels,higher sand content,and mainly braided channel,flood plain and aeolian dune microfacies.The distal belt has the smallest slope and flat terrain,where the river begins to transform from braided river to meandering river,the sediment is mainly sand.Due to the influence of slope,this belt has weaker erosion toward source and stronger lateral erosion,and point bars developing around the edge of the active lobes.In this belt,the river is completely meandering,and the main microfacies are braided channel,meandering channel,flood plain,aeolian dune,lake and swamp.展开更多
The resistance characteristics of a continuously-graded distributed Bragg reflector（DBR） in a 980-nm verticalcavity surface-emitting laser（VCSEL） are modeled in detail.The junction resistances between the layers o...The resistance characteristics of a continuously-graded distributed Bragg reflector（DBR） in a 980-nm verticalcavity surface-emitting laser（VCSEL） are modeled in detail.The junction resistances between the layers of both the p-and n-DBR mirrors are analysed by combining the thermionic emission model and the finite difference method.In the meantime,the intrinsic resistance of the DBR material system is calculated to make a comparison with the junction resistance.The minimal values of series resistances of the graded p-and n-type DBR mirrors and the lateral temperature-dependent resistance variation are calculated and discussed.The result indicates the potential to optimize the design of the DBR reflectors of the 980-nm VCSELs.展开更多
Dovetree (Davidia involucrate), one of the first-class protective plants in China, is a relic species of paleotropical kingdom in Tertiary period, belonging toDavidiaceae with a single genus. In recent years, the incr...Dovetree (Davidia involucrate), one of the first-class protective plants in China, is a relic species of paleotropical kingdom in Tertiary period, belonging toDavidiaceae with a single genus. In recent years, the increase of regional developing projects has led to a sharp decrease of this ancient and rare plant in naturally distributed habitats and natural population. In this paper, the biological and ecological characteristics of Dovetree were described, and the geographically distributed condition of this species in different geologic periods as well as the major reasons for dynamic changes of its population were systematically analyzed in accordance with field researches and references. The investigations conducted in different years by setting up standard sample plots showed that the population number of Dovetree increased yearly in the areas without human interference but decreased yearly in the areas with human interference. With the increase of population density and human activities decreased as the logarithmic curve:Y=?100.7ln(x)+178.09, and it has turned from a dominant population into an endangered population. Based on the former and present studies on Dovetree, some protection strategies were put foreword for protecting this ancient and rare species. Keywords Davidia involucrate - Dovetree - Geographical Distribution - Biological Characteristics - Protection Policy CLC number S718.4 Document code A Article ID 1007-662X(2004)01-0039-06 Foundation Item: This research was coordinated by the National Natural Science Foundation of China (No. 39970591)Biography: Wu Gang (1965-), Male, Professor in Key Laboratory of Systems Ecology, Research Center for Eco Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China.Responsible editor: Chai Ruihai展开更多
In this paper ecogeographical characteristics of forest soil animal i n mountainous districts of the eastern China was analyzed, and results show that soil fauna was very rich in diversified forest habitat, moreover,...In this paper ecogeographical characteristics of forest soil animal i n mountainous districts of the eastern China was analyzed, and results show that soil fauna was very rich in diversified forest habitat, moreover, as times and spaces varied, their compositions and abundance changed obviously too. Forest so il animal decreased gradually in taxa and individual number from the tropics to cold-temperature zone, and they are higher in zonal forest habitat than in other ones on the same mountain. Forest soil animal also got gradually less with incr easing of depth in soil layer, and distributed principally in surface layer. The activities of human had strong affection on faunal composition and diversity of soil animal. On the tropics and subtropics mountains, forest soil animal are le ss in spring-summer than in autumn-winter, whereas they are more in summer-autum n than in winter-spring from warm-temperate zone to cold-temperate zone.展开更多
The characteristics of the flowfields of a synthetic jet actuator are experimentally investigated with the slot-nozzle driven by the piezoelectric membrane. The particle image velocimetry （PIV） and the hot-wire anem...The characteristics of the flowfields of a synthetic jet actuator are experimentally investigated with the slot-nozzle driven by the piezoelectric membrane. The particle image velocimetry （PIV） and the hot-wire anemometer are utilized to measure the flowfields and the velocity profiles of the actuator with different actuating factors. Analytical results show that pairs of counter-rotating vortices are generated near the nozzle. With the development of the synthetic ject, the synthetic jet rapidly spreads in the slot-width direction; while in the slot-length direction, it contracts firstly and slowly spreads. The centerline velocity distribution has a up-down tendency varying with axial distances, and accelerates to its maximum at z/b= 10. The transverse velocity profile across the slot-width is centro-symmetric and self-similar. However, the velocity profiles across the slot-length are saddle-like near the nozzle. It shows that there are two resonance frequencies for the actuator. If the actuator works with the resonance frequency, the vorticity and the velocity of the synthetic jet are higher than those of other frequencies. Compared with the continuous jet, the synthetic jet shows special flow characteristics.展开更多
The study or pore characteristics is or great importance in reservoir evaluation,especially in deeply buried s andstone.It controls the storage mechanism and reservoir fluid properties of the permeable horizons.The fi...The study or pore characteristics is or great importance in reservoir evaluation,especially in deeply buried s andstone.It controls the storage mechanism and reservoir fluid properties of the permeable horizons.The first member of Eocene Shahejie Formation(Esl)sandstone is classified as feldspathic litharenite and lithic arkose.The present research investigates the pore characteristics and reservoir features of the deeply buried sandstone reservoir of Esl member of Shahejie Formation.The techniques including thin-section petrography,mercury injection capillary pressure(MICP),scanning electron microscopy and laser scanning confocal microscope images were used to demarcate the pores including primary intergranular pores and secondary intergranular,intragranular,dissolution and fracture pores.Mercury injection test and routine core analysis were led to demarcate the pore network characteristics of the studied reservoir.Pore size and pore throat size distribution are acquired from mercury injection test.Porosity values range from 0.5%to 30%,and permeability ranges 0.006-7000 mD.Pore radii of coarse-grained sandstone and fine-grained sandstone range from 0.2 to>4μm and 1 nm to 1.60μm,respectively,by MICP analysis.The mineral composition also plays an important role in protecting the pores with pressure from failure.Fractured sandstone and coarse-grained sandstone consist of large and interconnected pores that enhance the reservoir porosity and permeability,whereas fine-grained sandstone and siltstone consist of numerous pores but not well interconnected,and so they consist of high porosity with low permeability.展开更多
To investigate the effect of the rib structure on the discharge characteristics of the plasma display panel, the potential distribution, particles density distribution and ions incident angle distribution were examine...To investigate the effect of the rib structure on the discharge characteristics of the plasma display panel, the potential distribution, particles density distribution and ions incident angle distribution were examined by simulation of a two-dimensional particle-in-cell/Monte Carlo collision, with two kinds of rib structure： the stripe rib structure and the Waffle rib structure. The results showed that the distribution of electric potential at the corner of the discharge cell was almost the same for these two rib structures while in the centre there was a difference between these two rib structures. The striation phenomenon could be observed in both cases. The distribution of density also indicated that the striation phenomenon was accompanied by the firing of discharge, and the Waffle rib structure might reduce the density humps. In the cell with a stripe rib structure, the profiles of the surface charge density along the sustained dielectric layer presented a better fluctuating distribution than that in the cell with a Waffle rib structure. The spatial potential and particle density in the discharge bulk showed that the Waffle ribs could weaken the striation phenomenon, which could be explained by the decrease in the particle numbers in the discharge cell. The simulation results of the ion incident angle showed that most ions impacted the sustained dielectric layer in the normal stripe rib cell with an incident angle in the range of 6° to 19° while with the Waffle rib structure the incident angle of most ions was in the range of 4° to 19°. The Waffle rib structure did not affect the angle distribution of incident ions significantly.展开更多
The VRDS feedstock processed in refineries along the Yangtze River has special characteristics, including high Fe and Ca content, and low sulfur and high nitrogen content. Depending upon feedstock properties and opera...The VRDS feedstock processed in refineries along the Yangtze River has special characteristics, including high Fe and Ca content, and low sulfur and high nitrogen content. Depending upon feedstock properties and operating conditions,some approaches have been developed by the SINOPEC Research Institute of Petroleum Processing(RIPP), which include installing the decalcification facility, developing new guard catalysts and HDCCR catalysts, implementing a new catalyst grading approach, developing a highly efficient distribution technology and applying RICP process in some refineries.The application effects have revealed that the integrated technology, which can be conducive to the long-cycle operation developed by RIPP, can maximize the deposits uptake capacity of the guard reactor and the activity of grading catalysts.展开更多
A new coaxial pulsed plasma thruster （PPT） laboratory model is designed and employed in this study. A Teflon sleeve is connected with the anode, which is shaped as a nozzle, and a cathode is mounted in the cavity of...A new coaxial pulsed plasma thruster （PPT） laboratory model is designed and employed in this study. A Teflon sleeve is connected with the anode, which is shaped as a nozzle, and a cathode is mounted in the cavity of the Teflon sleeve and kept in close contact with it. A thread is then designed in the internal surface of the Teflon sleeve, and because of the strong field strength of the cathode triple junction （CTJ）, vacuum flashover occurs and a plasma jet is acquired behind the anode. The electric field distribution of the designed coaxial PPT laboratory model is simulated by MAXWELL 3D simulation software, and the plasma density and thrust are measured by a Langnmir probe and a piezoelectric thin-film sensor, respectively. Through a series of comparative experiments, we discuss the impact of optimal designs, such as the thread and the nozzle-shaped anode, on the discharge characteristics of the coaxial PPT. The experimental and simulation results indicate that the designed coaxial PPT laboratory model presents better discharge characteristics in view of its higher plasma density and greater thrust.展开更多
In this paper,a fault location method for the petal-shaped distribution network(PSDN)with inverter-interfaced distributed generators(IIDGs)is proposed to shorten the time of manual inspection.In order to calculate the...In this paper,a fault location method for the petal-shaped distribution network(PSDN)with inverter-interfaced distributed generators(IIDGs)is proposed to shorten the time of manual inspection.In order to calculate the fault position,the closed-loop structure of the PSDN is skillfully exploited,and the common control strategies of IIDGs are considered.For asymmetrical faults,a fault line identification formula based on the negative-sequence current phase differences is presented,and a fault location formula only utilizing the negative-sequence current amplitudes is derived to calculated the fault position.For symmetrical faults,the positive-sequence current at both ends of lines and the current output from IIDGs are used to identify the fault line,and the positive-sequence current on multiple lines are used to pinpoint the fault position.In this method,corresponding current phasors are separated into amplitudes and phases to satisfy the limitation of communication level.The simulation results show that the error is generally less than 1%,and the accuracy of the proposed method is not affected by the fault type,fault position,fault resistance,load current,and the IIDG penetration.展开更多
The shapes and geometrical parameters of nozzles are key factors for fluidics. The relationship among the reaction thrust, flow rate pressure, diameter do and length L of a cylinder nozzle is analyzed theoretically. T...The shapes and geometrical parameters of nozzles are key factors for fluidics. The relationship among the reaction thrust, flow rate pressure, diameter do and length L of a cylinder nozzle is analyzed theoretically. The simulation of the flow field characteristics was conducted via the FLUENT computational fluid dynamics package. Effects of the inlet conditions and the nozzle dimensions on the reaction thrust of a water jet were addressed particularly. The reaction thrust experiments were performed on a custom-designed test apparatus. The experimental results reveal that a） the nozzle diameter and the inlet conditions exert great influence on the water jet reaction thrust; and b） for L≤4d0, where the nozzle is treated as a thin plate-orifice, the reaction thrust is independent of nozzle length; for L〉4d0, where the nozzle is treated as a long orifice, the reaction thrust can reach maximum under the condition of a certain flow rate. These findings lay a theoretical foundation for the design of nozzles and have significant value, especially for the future development of high-oressure water-let orooulsion technology.展开更多
Based on core, thin-section, scanning electron microscopy(SEM) and well logging data, the characteristics of the parametamorphic rock reservoirs in the Pingxi area were analyzed by means of whole rock X-ray diffractio...Based on core, thin-section, scanning electron microscopy(SEM) and well logging data, the characteristics of the parametamorphic rock reservoirs in the Pingxi area were analyzed by means of whole rock X-ray diffraction and micron CT scanning. The parametamorphic rock reservoirs mainly had three types of rocks: slate, crystalline limestone and calc-schist; the original rocks were Ordovician-Silurian marine clastic and carbonate rocks. The three types of parametamorphic rock reservoirs developed three types and six sub-types of reservoir space. The first type of reservoir space was fractures, including structural, weathered and dissolution fractures; the second type was dissolved porosities, including dissolved pores and caves; the third type was nano-sized intercrystalline porosities. The three types of parametamorphic rock reservoirs were different widely in the quantity, volume and radius of pore-throats, and were strongly affected by the type and development degree of fractures. The parametamorphic rock reservoirs were formed by metamorphism, weathering, structural fragmentation and dissolution. Metamorphism reformed the parametamorphic rock reservoirs significantly, breaking the traditional constraint of finding weathering crust at top. The parametamorphic rock reservoirs experienced five formation stages, and their distribution was controlled by rock type, metamorphic degree, ancient geomorphology, and weathering intensity.展开更多
基金supported by the National Key Research and Development Program of China (Grant No.2021YFC3001204)。
文摘The study of non-axisymmetric fuel dispersal and detonation can provide reference for the prevention of industrial cloud explosion accidents and the design of fuel air explosive(FAE).The concentration and detonation fields of 85 kg cylindrical and fan-shaped fuel are investigated by experiments and numerical simulations.A dynamic model of the whole process for fuel dispersal and detonation is built.The concentration distribution of fuel is used as the initial condition to calculate the detonation stage,thus solving the initial value problem of detonation field.The phase and component changes of fuel cloud at different locations are compared.The fuel cloud is divided into directions of 0°,90°,135°and 180°.The results show that the maximum cloud radius is 20.94 m in 135°and the minimum is 12.04 m in 0°.The diameter of the detonation fireball is 53.6 m,and the peak temperature is 3455 K.The highest peak overpressure is 3.44 MPa in 0°and the lowest is 2.97 MPa in 135°.The proportion of liquid phase in 0°is22.90%,and the fuel loss is 11.8% and 9% higher than that in 135°and cylindrical charge,respectively.The stable propagation distance of blast wave in 135°is 42.50% longer than 0°and 28.37% longer than cylindrical charge.
文摘Aim To quantitatively study three characteristics of the Weibull distribution. Methods Theoritical analysis of the three characteristics of parameters of the Weibull distribution was done and mathematics software was used to make some chart analysis. Results 17 equations and 7 figures were made. Conclusion Under the standard form, the class of the Weibull probable density founction(pdf) curves appear double peak shape. Under the standard form, the maximum value point curve of the Weibull pdf takes line t =0 and t=1 as asymptotes. When β = 3 30-3 40, the Weibull distribution is the most similar to the normal distribution.
基金Supported by the National Natural Science Foundation of China(51105039)
文摘In order to make reconfigurable manufacturing system （RMS） adapt to the fluctuations of production demand with the minimum number of reconflgurations in its full life cycle, we presented a method to design RMS based on the balanced distribution of functional characteristics for ma- chines. With this method, functional characteristics were classified based on machining functions of cutting-tools and machining accuracy of machines. Then the optimization objective was set as the to- tal shortest mobile distance that all the workpieces are moved from one machine to another, and an improved genetic algorithm （GA） was proposed to optimize the configuration. The elitist strategy was used to enhance the global optimization ability of GA, and excellent gene pool was designed to maintain the diversity of population. Software Matlab was used to realize the algorithm, and a case study of simulation was used to evaluate the method.
文摘Employing theory on vehicle-track coupled dynamics, the equation of motion of a vehicle-track vertical coupled system was established by combining frequency analysis and symplectic mathematics. The frequency response of the vehicle-track vertical coupled system was calculated under the excitation of the German low-interfer- ence spectrum, and the effects of the vehicle speed, vehicle suspension parameters, and track support parameters on the frequency response of the coupled system were studied. Results show that, under the excitation of the German low- interference spectrum, the vertical vibration of the car body is mainly concentrated in the low-frequency band, while that of the bogie has a wide frequency distribution, being strong from several Hertz to dozens of Hertz. The vertical vibrations of the wheel-rail force, wheelset, and track structure mainly occur at a frequency of dozens of Hertz. In general, the vertical vibration of the vehicle-track coupled system increases with vehicle speed, and the vertical vibrations of the car body and bogie obviously shift to higher frequency. Increasing the vehicle suspension stiffness increases the low- frequency vibrations of the vehicle system and track struc- ture. With an increase in vehicle suspension damping, the low-frequency vibrations of the car body and bogie and the vibrations of the wheel-rail vertical force and track structure decrease at 50-80 Hz, while the mid-frequency and high- frequency vibrations of the car body and bogie increase. Similarly, an increase in track stiffness amplifies the vertical vibrations of the wheel-rail force and track structure, while an increase in track damping effectively reduces the vertical vibrations of the wheel-rail vertical force and track structure.
文摘For establishing the equation of the capacitive target detection accurately, the distributing characteristics of the charges on the bomb body with capacitance fuze were explored. Continuous charges were analyzed dispersively. Based on the Coulomb's law, the dynamic equilibrium equations of the inducing charges on the bomb body were set up. For the four cases of d 0/L (the ratio between the electrode distance and the bomb length), the curves of the charge's distribution were given. It was concluded that: ① the charge density decreases steadily from the end near the frontal electrode to the bomb tail; ② the declining rate of the density is governed by d 0/L , the larger the value of d 0/L ,the higher the declining rate, and vice versa.
文摘The spatial distributions of the electron density and the mean electron energy of argon radio frequency （rf） glow discharge plasma in a plasma-enhanced chemical vapour deposition （PECVD） system have been investigated using an established movable Langmuir probe. The results indicate that in the axial direction the electron density tends to peak at midway between the two electrodes while the axial variation trend of mean electron energy is different from that of the electron density, the mean electron energy is high near the electrodes. And the mean electron energy near the cathode is much higher than that near the anode. This article focuses on the radial distribution of electron density and mean electron energy. A proposed theoretical model distribution agrees well with the experimental one： the electron density and the mean electron energy both increase from the centre of the glow to the edge of electrodes. This is useful for better understanding the discharge mechanism and searching for a better deposition condition to improve thin film quality.
基金Supported by the Marine Engineering Equipment Scientific Research Project of Ministry of Industry and Information Technology of PRCthe National Science and Technology Major Project of China(Grant No.2016ZX05057020)National Natural Science Foundation of China(Grant No.51809067)
文摘The probability distributions of wave characteristics from three groups of sampled ocean data with different significant wave heights have been analyzed using two transformation functions estimated by non-parametric and parametric methods. The marginal wave characteristic distribution and the joint density of wave properties have been calculated using the two transformations, with the results and accuracy of both transformations presented here. The two transformations deviate slightly between each other for the calculation of the crest and trough height marginal wave distributions, as well as the joint densities of wave amplitude with other wave properties. The transformation methods for the calculation of the wave crest and trough height distributions are shown to provide good agreement with real ocean data. Our work will help in the determination of the most appropriate transformation procedure for the prediction of extreme values.
基金Supported by the National Natural Science Foundation of China(41772094)National Science and Technology Major Project(2016ZX05027-002-007)。
文摘Based on detailed investigation of the modern sedimentation of the distributive fluvial system of Shule River and the data of unmanned aerial vehicle(UAV)aerial photography and satellite remote sensing,the sedimentary characteristics and differences of distributive fluvial system in arid areas are analyzed.By comparing the changes in slope,river morphology and sedimentary characteristics in different sections from the apex to the toe,the distributive fluvial system of Shule River can be divided into three facies belts:"proximal","middle"and"distal".The proximal belt has the largest slope and strongest hydrodynamic condition,mainly appears as large-scale braided river deposits;the fluvial bars in this belt are mainly composed of gravels,the gravels have good roundness and certain directionality,and are medium-large boulders,with low sand content;the main microfacies in this belt are braided channel and flood plain.The middle belt with slope smaller than the proximal belt,is mainly composed of braided bifurcating river deposits.Due to branching and infiltration,this belt has weaker hydrodynamic conditions,so some of the distributive rivers dry up,appearing as ephemeral rivers.This belt has small lenticular sandbodies,fine to medium gravels,higher sand content,and mainly braided channel,flood plain and aeolian dune microfacies.The distal belt has the smallest slope and flat terrain,where the river begins to transform from braided river to meandering river,the sediment is mainly sand.Due to the influence of slope,this belt has weaker erosion toward source and stronger lateral erosion,and point bars developing around the edge of the active lobes.In this belt,the river is completely meandering,and the main microfacies are braided channel,meandering channel,flood plain,aeolian dune,lake and swamp.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10974012)
文摘The resistance characteristics of a continuously-graded distributed Bragg reflector（DBR） in a 980-nm verticalcavity surface-emitting laser（VCSEL） are modeled in detail.The junction resistances between the layers of both the p-and n-DBR mirrors are analysed by combining the thermionic emission model and the finite difference method.In the meantime,the intrinsic resistance of the DBR material system is calculated to make a comparison with the junction resistance.The minimal values of series resistances of the graded p-and n-type DBR mirrors and the lateral temperature-dependent resistance variation are calculated and discussed.The result indicates the potential to optimize the design of the DBR reflectors of the 980-nm VCSELs.
基金The National Natural Science Foundation of China (No. 39970591)
文摘Dovetree (Davidia involucrate), one of the first-class protective plants in China, is a relic species of paleotropical kingdom in Tertiary period, belonging toDavidiaceae with a single genus. In recent years, the increase of regional developing projects has led to a sharp decrease of this ancient and rare plant in naturally distributed habitats and natural population. In this paper, the biological and ecological characteristics of Dovetree were described, and the geographically distributed condition of this species in different geologic periods as well as the major reasons for dynamic changes of its population were systematically analyzed in accordance with field researches and references. The investigations conducted in different years by setting up standard sample plots showed that the population number of Dovetree increased yearly in the areas without human interference but decreased yearly in the areas with human interference. With the increase of population density and human activities decreased as the logarithmic curve:Y=?100.7ln(x)+178.09, and it has turned from a dominant population into an endangered population. Based on the former and present studies on Dovetree, some protection strategies were put foreword for protecting this ancient and rare species. Keywords Davidia involucrate - Dovetree - Geographical Distribution - Biological Characteristics - Protection Policy CLC number S718.4 Document code A Article ID 1007-662X(2004)01-0039-06 Foundation Item: This research was coordinated by the National Natural Science Foundation of China (No. 39970591)Biography: Wu Gang (1965-), Male, Professor in Key Laboratory of Systems Ecology, Research Center for Eco Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China.Responsible editor: Chai Ruihai
文摘In this paper ecogeographical characteristics of forest soil animal i n mountainous districts of the eastern China was analyzed, and results show that soil fauna was very rich in diversified forest habitat, moreover, as times and spaces varied, their compositions and abundance changed obviously too. Forest so il animal decreased gradually in taxa and individual number from the tropics to cold-temperature zone, and they are higher in zonal forest habitat than in other ones on the same mountain. Forest soil animal also got gradually less with incr easing of depth in soil layer, and distributed principally in surface layer. The activities of human had strong affection on faunal composition and diversity of soil animal. On the tropics and subtropics mountains, forest soil animal are le ss in spring-summer than in autumn-winter, whereas they are more in summer-autum n than in winter-spring from warm-temperate zone to cold-temperate zone.
文摘The characteristics of the flowfields of a synthetic jet actuator are experimentally investigated with the slot-nozzle driven by the piezoelectric membrane. The particle image velocimetry （PIV） and the hot-wire anemometer are utilized to measure the flowfields and the velocity profiles of the actuator with different actuating factors. Analytical results show that pairs of counter-rotating vortices are generated near the nozzle. With the development of the synthetic ject, the synthetic jet rapidly spreads in the slot-width direction; while in the slot-length direction, it contracts firstly and slowly spreads. The centerline velocity distribution has a up-down tendency varying with axial distances, and accelerates to its maximum at z/b= 10. The transverse velocity profile across the slot-width is centro-symmetric and self-similar. However, the velocity profiles across the slot-length are saddle-like near the nozzle. It shows that there are two resonance frequencies for the actuator. If the actuator works with the resonance frequency, the vorticity and the velocity of the synthetic jet are higher than those of other frequencies. Compared with the continuous jet, the synthetic jet shows special flow characteristics.
基金funded by the Natural Science Foundation of China Project(No.41602138)National Science and Technology Special Grant(No.2016ZX05006007)+1 种基金China Postdoctoral Science Foundation-funded Project(2015M580617,2017T100524)the Fundamental Research Funds for the Central Universities(15CX08001A)
文摘The study or pore characteristics is or great importance in reservoir evaluation,especially in deeply buried s andstone.It controls the storage mechanism and reservoir fluid properties of the permeable horizons.The first member of Eocene Shahejie Formation(Esl)sandstone is classified as feldspathic litharenite and lithic arkose.The present research investigates the pore characteristics and reservoir features of the deeply buried sandstone reservoir of Esl member of Shahejie Formation.The techniques including thin-section petrography,mercury injection capillary pressure(MICP),scanning electron microscopy and laser scanning confocal microscope images were used to demarcate the pores including primary intergranular pores and secondary intergranular,intragranular,dissolution and fracture pores.Mercury injection test and routine core analysis were led to demarcate the pore network characteristics of the studied reservoir.Pore size and pore throat size distribution are acquired from mercury injection test.Porosity values range from 0.5%to 30%,and permeability ranges 0.006-7000 mD.Pore radii of coarse-grained sandstone and fine-grained sandstone range from 0.2 to>4μm and 1 nm to 1.60μm,respectively,by MICP analysis.The mineral composition also plays an important role in protecting the pores with pressure from failure.Fractured sandstone and coarse-grained sandstone consist of large and interconnected pores that enhance the reservoir porosity and permeability,whereas fine-grained sandstone and siltstone consist of numerous pores but not well interconnected,and so they consist of high porosity with low permeability.
文摘To investigate the effect of the rib structure on the discharge characteristics of the plasma display panel, the potential distribution, particles density distribution and ions incident angle distribution were examined by simulation of a two-dimensional particle-in-cell/Monte Carlo collision, with two kinds of rib structure： the stripe rib structure and the Waffle rib structure. The results showed that the distribution of electric potential at the corner of the discharge cell was almost the same for these two rib structures while in the centre there was a difference between these two rib structures. The striation phenomenon could be observed in both cases. The distribution of density also indicated that the striation phenomenon was accompanied by the firing of discharge, and the Waffle rib structure might reduce the density humps. In the cell with a stripe rib structure, the profiles of the surface charge density along the sustained dielectric layer presented a better fluctuating distribution than that in the cell with a Waffle rib structure. The spatial potential and particle density in the discharge bulk showed that the Waffle ribs could weaken the striation phenomenon, which could be explained by the decrease in the particle numbers in the discharge cell. The simulation results of the ion incident angle showed that most ions impacted the sustained dielectric layer in the normal stripe rib cell with an incident angle in the range of 6° to 19° while with the Waffle rib structure the incident angle of most ions was in the range of 4° to 19°. The Waffle rib structure did not affect the angle distribution of incident ions significantly.
文摘The VRDS feedstock processed in refineries along the Yangtze River has special characteristics, including high Fe and Ca content, and low sulfur and high nitrogen content. Depending upon feedstock properties and operating conditions,some approaches have been developed by the SINOPEC Research Institute of Petroleum Processing(RIPP), which include installing the decalcification facility, developing new guard catalysts and HDCCR catalysts, implementing a new catalyst grading approach, developing a highly efficient distribution technology and applying RICP process in some refineries.The application effects have revealed that the integrated technology, which can be conducive to the long-cycle operation developed by RIPP, can maximize the deposits uptake capacity of the guard reactor and the activity of grading catalysts.
文摘A new coaxial pulsed plasma thruster （PPT） laboratory model is designed and employed in this study. A Teflon sleeve is connected with the anode, which is shaped as a nozzle, and a cathode is mounted in the cavity of the Teflon sleeve and kept in close contact with it. A thread is then designed in the internal surface of the Teflon sleeve, and because of the strong field strength of the cathode triple junction （CTJ）, vacuum flashover occurs and a plasma jet is acquired behind the anode. The electric field distribution of the designed coaxial PPT laboratory model is simulated by MAXWELL 3D simulation software, and the plasma density and thrust are measured by a Langnmir probe and a piezoelectric thin-film sensor, respectively. Through a series of comparative experiments, we discuss the impact of optimal designs, such as the thread and the nozzle-shaped anode, on the discharge characteristics of the coaxial PPT. The experimental and simulation results indicate that the designed coaxial PPT laboratory model presents better discharge characteristics in view of its higher plasma density and greater thrust.
基金supported by State Grid Science and Technology Project:Research on Key Protection Technologies for New-type Urban Distribution Network with Controllable Sources and Loads(5100-201913019A-0-0-00).
文摘In this paper,a fault location method for the petal-shaped distribution network(PSDN)with inverter-interfaced distributed generators(IIDGs)is proposed to shorten the time of manual inspection.In order to calculate the fault position,the closed-loop structure of the PSDN is skillfully exploited,and the common control strategies of IIDGs are considered.For asymmetrical faults,a fault line identification formula based on the negative-sequence current phase differences is presented,and a fault location formula only utilizing the negative-sequence current amplitudes is derived to calculated the fault position.For symmetrical faults,the positive-sequence current at both ends of lines and the current output from IIDGs are used to identify the fault line,and the positive-sequence current on multiple lines are used to pinpoint the fault position.In this method,corresponding current phasors are separated into amplitudes and phases to satisfy the limitation of communication level.The simulation results show that the error is generally less than 1%,and the accuracy of the proposed method is not affected by the fault type,fault position,fault resistance,load current,and the IIDG penetration.
基金Funded by the Natural Science Foundation of China (No. 50775081)the National High-tech R&D (863) Program No. 2006AA09Z238)the NCET-07-0330, State Education Ministry.
文摘The shapes and geometrical parameters of nozzles are key factors for fluidics. The relationship among the reaction thrust, flow rate pressure, diameter do and length L of a cylinder nozzle is analyzed theoretically. The simulation of the flow field characteristics was conducted via the FLUENT computational fluid dynamics package. Effects of the inlet conditions and the nozzle dimensions on the reaction thrust of a water jet were addressed particularly. The reaction thrust experiments were performed on a custom-designed test apparatus. The experimental results reveal that a） the nozzle diameter and the inlet conditions exert great influence on the water jet reaction thrust; and b） for L≤4d0, where the nozzle is treated as a thin plate-orifice, the reaction thrust is independent of nozzle length; for L〉4d0, where the nozzle is treated as a long orifice, the reaction thrust can reach maximum under the condition of a certain flow rate. These findings lay a theoretical foundation for the design of nozzles and have significant value, especially for the future development of high-oressure water-let orooulsion technology.
基金Supported by the China National Science and Technology Major Project(2017ZX05001-002)
文摘Based on core, thin-section, scanning electron microscopy(SEM) and well logging data, the characteristics of the parametamorphic rock reservoirs in the Pingxi area were analyzed by means of whole rock X-ray diffraction and micron CT scanning. The parametamorphic rock reservoirs mainly had three types of rocks: slate, crystalline limestone and calc-schist; the original rocks were Ordovician-Silurian marine clastic and carbonate rocks. The three types of parametamorphic rock reservoirs developed three types and six sub-types of reservoir space. The first type of reservoir space was fractures, including structural, weathered and dissolution fractures; the second type was dissolved porosities, including dissolved pores and caves; the third type was nano-sized intercrystalline porosities. The three types of parametamorphic rock reservoirs were different widely in the quantity, volume and radius of pore-throats, and were strongly affected by the type and development degree of fractures. The parametamorphic rock reservoirs were formed by metamorphism, weathering, structural fragmentation and dissolution. Metamorphism reformed the parametamorphic rock reservoirs significantly, breaking the traditional constraint of finding weathering crust at top. The parametamorphic rock reservoirs experienced five formation stages, and their distribution was controlled by rock type, metamorphic degree, ancient geomorphology, and weathering intensity.
