In order to investigate the effect of additives and nano-particle on the surface tensions of lithium bromide(Li Br) aqueous solution/ammonia, many experiments were carried out based on Wilhelmy plate method. Firstly, ...In order to investigate the effect of additives and nano-particle on the surface tensions of lithium bromide(Li Br) aqueous solution/ammonia, many experiments were carried out based on Wilhelmy plate method. Firstly, the surface tension of Li Br aqueous solution with 1-octanol was measured and then the comparison between the measured results and previous experimental results was given to verify the measuring accuracy. Some new additives, such as cationic surfactants cetyltrimethyl ammonium chloride(CTAC), and cetyltrimethyl ammonium bromide(CTAB) were chosen in the experiments. The experimental results show that CTAC and CTAB can obviously reduce the surface tension of Li Br aqueous solution/ammonia. In addition, it is found that nano-particles cannot remarkably decrease the surface tension of Li Br aqueous solution/ammonia. However, the mixed addition of additives and nano-particles can remarkably affect the surface tension of Li Br aqueous solution/ammonia. That is to say, additives play more important role in reducing the surface tension of Li Br aqueous solution/ammonia. But nano-particles may enhance the heat transfer in the absorption refrigeration process.展开更多
Ni-W-P composite coatings reinforced by Ce O2 and Si O2 nano-particles on the surface of common carbon steels, were prepared by double pulse electrodeposition. The crystallization course was characterized by phase str...Ni-W-P composite coatings reinforced by Ce O2 and Si O2 nano-particles on the surface of common carbon steels, were prepared by double pulse electrodeposition. The crystallization course was characterized by phase structures, crystallinity, grain sizes and microstructures. The results indicate that as-deposited composite coating is amorphous. Whereas it turns into the crystalline structure with 98.25% crystallinity, and Ni3 P, Ni2 P and Ni5P2 alloy phases precipitate from structures at 400 °C. Thereafter, Ni2 P and Ni5P2 metastable alloy phases turn into Ni3 P stable alloy phase at 500 °C. The crystallization course of the composite coating has finished when being heat-treated at 700 °C. The average sizes of Ni grains increase with the rise of heat treatment temperature from400 °C to 700 °C. Ce O2 and Si O2 nano-particles deposited into Ni-W-P alloys can delay the crystallization course and habit the growth of alloy phases.展开更多
Rutile phase exhibits higher refractive index and h id ing power, good chemical stability, and is becoming a candidate material for the high-temperature separation and catalysis applications. The thermodynamically sta...Rutile phase exhibits higher refractive index and h id ing power, good chemical stability, and is becoming a candidate material for the high-temperature separation and catalysis applications. The thermodynamically stable feature of rutile among the three polymorphs of TiO 2 usually hinders ob taining nano-sized rutile phase by a conventional calcining way. However, acid peptization of amorphous TiO 2 is favorable to the formation of rutile phase. I n this work, well-crystallized and well-dispersed rod-like rutile particles w ith specific surface areas of 49.1 and 35.0 m 2/g were prepared by hydrothermal ly treating the acid peptized TiO 2 amorphous sols at relatively low temperatur es of 200 ℃ or 240 ℃, respectively. The formation of non-touching rutile part icles is attributed to high long-range electrostatic forces between particles i n the presence of the high concentration of the peptizer. The acid peptization w ould easily break the ≡Ti-O-Ti≡ bonds to form ≡Ti-OH or HO-Ti-OH species depending on the amount of acid, and create conditions for the formation of rut ile nuclei after structural rearrangements.展开更多
China is extremely poor in mineral resources of Platinum Group Metals (PGMs), productive output of PGMs from mineral resource is 2.5 tons per year. At the same time, China is the biggest PGMs consumption country in th...China is extremely poor in mineral resources of Platinum Group Metals (PGMs), productive output of PGMs from mineral resource is 2.5 tons per year. At the same time, China is the biggest PGMs consumption country in the world, the mineral resource of PGMs is critical shortage, it shows the importance of recycling the secondary resource of PGMs. Sino-Platinum Metals Resource (Yimen) Co., Ltd. is the leader in recycling of PGMs from secondary resource, and has made outstanding contributions to China PGMs secondary resources recycling. This article elucidates the current situation of secondary resources recovery and development of metallurgical technology for PGMs.展开更多
Pt and Ir coatings were produced by double glow plasma technology on the surface of Ti alloy substrates. The chemical compositions of the coatings were determined by X-ray diffraction and X-ray photoelectron spectrosc...Pt and Ir coatings were produced by double glow plasma technology on the surface of Ti alloy substrates. The chemical compositions of the coatings were determined by X-ray diffraction and X-ray photoelectron spectroscopy. The microstructure and morphology of the coatings were observed by scanning electron microscopy. The hardness and elastic modulus of the coatings were estimated by nanoindentation. The measurements of adhesive forces of the coatings were performed with scratch tester. The results indicated that the Pt and Ir coatings displayed the preferred (220) orientation due to the initial nuclei with preferred growth on the surface of the substrates. The interface between the Pt coating and substrate exhibited no evidence of delamination. The Ir coating was composed of irregular columnar grains with many nanovoids at the interface between the coating and substrate. The mean values of hardness for Pt and Ir coatings were 0.9 GPa and 9 GPa, respectively. The elastic modulus of Pt and Ir coatings were 178 GPa and 339 GPa, respectively. The adhesive forces of the Pt and Ir coatings were about 66.4 N and 55 N, respectively. The Pt and Ir coatings adhered well to the Ti alloy substrates.展开更多
Porous platinum electrodes were prepared by adding YSZ,as an active material,in platinum paste.Relationship between microstructure and electrochemical performance of O 2(g),Pt/YSZ electrode have been characterized by ...Porous platinum electrodes were prepared by adding YSZ,as an active material,in platinum paste.Relationship between microstructure and electrochemical performance of O 2(g),Pt/YSZ electrode have been characterized by SEM and cyclic voltammetry.Results showed that the microstructure of platinum electrode is a significant impact on the cyclic voltammetry.With the increase of platinum electrode's porosity,the area of three-phase boundary of O 2(g) /Pt/YSZ was increased.The electrochemical reactivity was also enhanced.These were presented as the increase of current density and cathode voltage in cyclic voltammetry.展开更多
A new cyclometalated platinum complex containing 2, 5-bis(naphthalene-1-yl)-1,3,4-oxadiazole ligand was synthesized and characterized. The UV-Vis absorptions and photoluminescent properties of the ligand and its plati...A new cyclometalated platinum complex containing 2, 5-bis(naphthalene-1-yl)-1,3,4-oxadiazole ligand was synthesized and characterized. The UV-Vis absorptions and photoluminescent properties of the ligand and its platinum complex were investigated. A characteristic metal-ligand charge transfer absorption peak at 439 nm in the UV spectrum and a strong emission peak at 625 nm in the photoluminescence spectrum were observed for this complex in dichloromethane. Cyclic voltammtry (CV) analysis shows that the EHOMO (energy level of the highest occupied molecular orbital) and ELUMO (energy level of the lowest unoccupied molecular orbital) of the platinum complex are about 、5.69 and 、3.25 eV, respectively, indicating that the oxadiazole-based platinum complex has a potential application in electrophosphorescent devices used as a red-emitting material.展开更多
Cancer metastasis is the leading cause of death in cancer patients worldwide and one of the major challenges in treating cancer.Circulating tumor cells(CTCs)play a pivotal role in cancer metastasis.However,the content...Cancer metastasis is the leading cause of death in cancer patients worldwide and one of the major challenges in treating cancer.Circulating tumor cells(CTCs)play a pivotal role in cancer metastasis.However,the content of CTCs in peripheral blood is minimal,so the detection of CTCs in real samples is extremely challenging.Therefore,efficient enrichment and early detection of CTCs are essential to achieve timely diagnosis of diseases.In this work,we constructed an innovative and sensitive single-nanoparticle collision electrochemistry(SNCE)biosensor for the detection of MCF-7 cells(human breast cancer cells)by immunomagnetic separation technique and liposome signal amplification strategy.Liposomes embedded with platinum nanoparticles(Pt NPs)were used as signal probes,and homemade gold ultramicroelectrodes(Au UME)were used as the working electrodes.The effective collision between Pt NPs and UME would produce distinguishable step-type current.MCF-7 cells were accurately quantified according to the relationship between cell concentration and collision frequency(the number of step-type currents generated per unit time),realizing highly sensitive and specific detection of MCF-7 cells.The SNCE biosensor has a linear range of 10 cells·mL^(-1)to 10^(5) cells·mL^(-1)with a detection limit as low as 5 cells·mL^(-1).In addition,the successful detection of MCF-7 cells in complex samples showed that the SNCE biosensors have great potential for patient sample detection.展开更多
The Fengshan porphyry-skam copper-molybdenum deposit is located in the southeastern Hubei Province, East China.Cu-Mo mineralization is hosted in the Fengshan quartz diorite porphyry stock that intruded the Triassic Da...The Fengshan porphyry-skam copper-molybdenum deposit is located in the southeastern Hubei Province, East China.Cu-Mo mineralization is hosted in the Fengshan quartz diorite porphyry stock that intruded the Triassic Daye Formation of carbonate rocks in the early Cretaceous(ca.140 Ma),as well as in the contact zone between these two,forming展开更多
This paper discusses about the purity of strengthened pure platinum wire and the development method of platinum micro wire, in order to solve the difficulties of low tensile strength, easy to break, and low rate of mi...This paper discusses about the purity of strengthened pure platinum wire and the development method of platinum micro wire, in order to solve the difficulties of low tensile strength, easy to break, and low rate of micro wire. And it contrasts some performance of strengthened pure platinum wire and sponge Pt wire. The researches draw a conclusion that the thermoelectric properties of strengthened pure platinum micro wire was in accordance with national standards and satisfied users' requirements.展开更多
Information on abundance and distribution of platinum\|group elements (PGE) in peridotite from ophiolite is relevant to understand the nature and evolution of the upper mantle. The ophiolite suite outcropping along th...Information on abundance and distribution of platinum\|group elements (PGE) in peridotite from ophiolite is relevant to understand the nature and evolution of the upper mantle. The ophiolite suite outcropping along the famous suture zone of Yarlung Zangbo River, Tibet, has attracted wide attention of geologists both in China and abroad. The Dagzhuka ophiolite of in the suture zone is thought to display a complete ophiolitic sequence. The peridotite from the Dazhuka ophiolite is composed of fairly fresh or unaltered lherzolite, harzburgite and minor dunite which are the upper mantle residuum formed by 15%～35% partial melting. In this paper we have mainly studied the abundance and distribution of PGE in the harzburgites and lherzolites. The harzburgites and lherzolites preserve total PGE contents of 28 37×10 -9 ～50 67×10 -9 respectively higher than Primitive mantle or the peridotite from some typical ophiolites and Alpine. They all have fractionated chondrite\|normalized PGE patterns with positive slopes from Ir to Pd (Fig.1), and Pd/Ir=1 13～2 40>1, Pd/Rh=2 23～7 49>1, and Pd/Pt=0 26～1 16 (average 0 67) higher than Primitive mantle (1 11, 2 35, 0 57) or CI\|chondrite (1 01, 2 73, 0 53). Consequently, the Dagzhuka peridotite are PGE\|enriched, but otherwise possess residual characteristics arising from a minimum of 15% partial melting. It is suggested that mantle residuum by partial melting have low total PGE contents, fractionated chondrite\|normalized PGE patterns with negative or slightly flat slopes from Ir to Pd, and Pd/Ir<1. But, the total PGE contents, chondrite\|normalized PGE patterns and Pt/Ir, Pd/Rh and Pd/Pt values of the Dagzhuka peridotite are completely inconsistent with a residual origin. Partial melting would have partitioned all sulfide in the source into the melt. In fact, no sulfide or silicate melt remained in the Dagzhuka peridotite. Therefore, PGE in Dagzhuka peridotite are not present in sulfides. The PGE\|enrichment and fractionation of the Dagzhuka peridotites seem to arise from mantle metasomatism of melts/fluid enrich incompatible elements include Pt and Pt, but not from residual or percolation of sulfides. The enrichment of Cs, Rb, Ba, Th, U and LREE in Dagzhuka peridotite also give a hint of the mantle metasomatism. The abundance and distribution of PGE in the peridotite from the Dagzhuka ophiolite show the nature and evolution of the Dagzhuka upper mantle are distinctive.展开更多
In order to control the silver content in the preparation process of platinum group anti-cancer drugs, we put two kinds of color reagent to color in the production process of the platinum anti-cancer drugs by UV spect...In order to control the silver content in the preparation process of platinum group anti-cancer drugs, we put two kinds of color reagent to color in the production process of the platinum anti-cancer drugs by UV spectra measurement to control drugs production of platinum anticancer, thus we could control the silver content in the drugs so that it meets the pharmacopoeia standards of US and展开更多
This paper introduces the research status and present situation of application of Pt/Ta composite anode materials for cathodic protection in China. It also introduces the corrosion resistance, bending properties and e...This paper introduces the research status and present situation of application of Pt/Ta composite anode materials for cathodic protection in China. It also introduces the corrosion resistance, bending properties and electrochemical performance in seawater and freshwater of the Pt/Ta composite anode materials for cathodic protection. It points out that compared with other platinum composite anodes, the Pt/Ta composite anode has the advantage of small volume, light weight, big drainage rate, long service life, it possesses superiority to be used in the confluence environment of sea water and fresh water and in the medium condition of resistivity changes at all times.展开更多
The literary data on the application of various methods for the production of nanopowders of platinum metals and alloys have been summarized, and the selection of the method of chemical reduction from salt solutions h...The literary data on the application of various methods for the production of nanopowders of platinum metals and alloys have been summarized, and the selection of the method of chemical reduction from salt solutions has been substantiated as the simplest and most affordable. The optimum conditions for the production of nanoparticles of metal palladium and platinum/cobalt alloy, using the effect of boranes with various structures, have been selected.展开更多
Platinum group metals (PGM) include six elements, namely Pt, Pd, Rh, Ir, Os and Ru. PGM and their alloys are the important fundamental materials for modern industry and national defense construction, they have special...Platinum group metals (PGM) include six elements, namely Pt, Pd, Rh, Ir, Os and Ru. PGM and their alloys are the important fundamental materials for modern industry and national defense construction, they have special physical and chemical properties, widely used in metallurgy, chemical, electric, electronic, information, energy, environmental protection, aviation, aerospace, navigation and other high technology industry. Platinum group metals and their alloys, which have good plasticity and processability, can be processed to electrical contact materials, resistance materials, solder, electronic paste, temperature-measurement materials, elastic materials, magnetic materials and high temperature structural materials.展开更多
In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bus...In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bushing.The diameter and microstructure of glass fibers have been investigated by scanning electron microscopy(SEM) and vertical optical microscope(VOM).The results indicated that the flow rate of molten glass was proportional to the diameter of glass fibers when the molten glass got main flow rate of 330 kg/h.The lower the flow rate was,the finer the average diameter was.展开更多
Purpose: To establish a HPLC testing method of the content of bulk picoplatin and its impurities. Method: the separation was perform on a C18 column(4.6 mm×250 mm, 5 m) with potassium dihydrogen phosphate-aceton-...Purpose: To establish a HPLC testing method of the content of bulk picoplatin and its impurities. Method: the separation was perform on a C18 column(4.6 mm×250 mm, 5 m) with potassium dihydrogen phosphate-aceton-itrile as the mobile phase at a flow rate of 1.0 mL/min. The detecting wavelength was set at 210 nm, and the column temperature was set at 30℃. Result: in the method validation, the linear relationship modulus of picoplatin is 0.9999, the systemic precision is 0.44%, the method precision is 0.74%, the average recovery rate is 99.62%, the LOD and LOQ of picoplatin is 0.2 ng and 1.0 ng. The average resolution of picoplatin and its impurities is more than 2. Conclusion: The established method is good specificity, high sensitivity, and good repeatability which could provide scientific evidence for the quality control of picoplatin and its impurities.展开更多
The paper revealed the place and role of Russia in the global market of platinum metals, highlighted features of pricing in the export of Russian platinum group metals, the main problems of pricing in the export contr...The paper revealed the place and role of Russia in the global market of platinum metals, highlighted features of pricing in the export of Russian platinum group metals, the main problems of pricing in the export contracts related to the instability of markets and imperfect currency and customs legislation of the Russian Federation, proposed innovative ways to solutions to existing problems in the preparation and conclusion of export contracts.展开更多
The residual metal impurities in cisplatin, carboplatin and oxaliplatin were determined by ICP-AES. The samples were ignited and dissolved with HCl:HNO 3 (3:1). The method is simple and accurate. By the determination ...The residual metal impurities in cisplatin, carboplatin and oxaliplatin were determined by ICP-AES. The samples were ignited and dissolved with HCl:HNO 3 (3:1). The method is simple and accurate. By the determination of the metal residues in the samples, the calculated actual daily exposure and concentration of the metal Pd, Ir, Rh, Ru, Mo, Ni, Cr, V, Cu, Mn, Fe and Zn that were less than the permitted daily exposures (PDE) and the limited concentration permitted in the EMEA guideline on the specification limits for residues of metal catalysts or metal reagents [1] . The metal residues can de adequately removed from the active pharmaceutical ingredients and the corresponding drugs. The trace metal residues will not affect human health and lead to the safety hazard by the intravenous injection.展开更多
For the manufacture of S-type thermocouple the so-called thermocouple wire of platinum and platinum-rhodium alloy is used.One of the main technical requirements for the quality of the wire,according to State Standard ...For the manufacture of S-type thermocouple the so-called thermocouple wire of platinum and platinum-rhodium alloy is used.One of the main technical requirements for the quality of the wire,according to State Standard of Russia(GOST 10821),is the uniformity of its largest thermoelectric force(Thermo-emf) in the length different sections.It was found that a determining impact on the uniformity of the wire thermo-emf is the distribution of rhodium along the length of the wire.The impact of platinum-rhodium melt crystallization conditions on the inhomogeneity of wire manufactured from it.It was suggested that the chemical inhomogeneity of the wire is related to the liquation phase of platinum-rhodium alloy.展开更多
基金Project(51206033)supported by the National Natural Science Foundation of ChinaProjects(2011M500652,2013T60354)supported by the China Postdoctoral Science FoundationProject(2011LBH-Z11139)supported by the Heilongjiang Postdoctoral Science Foundation,China
文摘In order to investigate the effect of additives and nano-particle on the surface tensions of lithium bromide(Li Br) aqueous solution/ammonia, many experiments were carried out based on Wilhelmy plate method. Firstly, the surface tension of Li Br aqueous solution with 1-octanol was measured and then the comparison between the measured results and previous experimental results was given to verify the measuring accuracy. Some new additives, such as cationic surfactants cetyltrimethyl ammonium chloride(CTAC), and cetyltrimethyl ammonium bromide(CTAB) were chosen in the experiments. The experimental results show that CTAC and CTAB can obviously reduce the surface tension of Li Br aqueous solution/ammonia. In addition, it is found that nano-particles cannot remarkably decrease the surface tension of Li Br aqueous solution/ammonia. However, the mixed addition of additives and nano-particles can remarkably affect the surface tension of Li Br aqueous solution/ammonia. That is to say, additives play more important role in reducing the surface tension of Li Br aqueous solution/ammonia. But nano-particles may enhance the heat transfer in the absorption refrigeration process.
基金Project(20806035)supported by the National Natural Science Foundation of ChinaProject(2009CI026)supported by the Back-up Personnel Foundation of Academic and Technology Leaders of Yunnan Province,ChinaProject(KKZ6200927001)supported by the Opening Fund of Key Laboratory of Inorganic Coating Materials,Chinese Academy of Sciences
文摘Ni-W-P composite coatings reinforced by Ce O2 and Si O2 nano-particles on the surface of common carbon steels, were prepared by double pulse electrodeposition. The crystallization course was characterized by phase structures, crystallinity, grain sizes and microstructures. The results indicate that as-deposited composite coating is amorphous. Whereas it turns into the crystalline structure with 98.25% crystallinity, and Ni3 P, Ni2 P and Ni5P2 alloy phases precipitate from structures at 400 °C. Thereafter, Ni2 P and Ni5P2 metastable alloy phases turn into Ni3 P stable alloy phase at 500 °C. The crystallization course of the composite coating has finished when being heat-treated at 700 °C. The average sizes of Ni grains increase with the rise of heat treatment temperature from400 °C to 700 °C. Ce O2 and Si O2 nano-particles deposited into Ni-W-P alloys can delay the crystallization course and habit the growth of alloy phases.
文摘Rutile phase exhibits higher refractive index and h id ing power, good chemical stability, and is becoming a candidate material for the high-temperature separation and catalysis applications. The thermodynamically stable feature of rutile among the three polymorphs of TiO 2 usually hinders ob taining nano-sized rutile phase by a conventional calcining way. However, acid peptization of amorphous TiO 2 is favorable to the formation of rutile phase. I n this work, well-crystallized and well-dispersed rod-like rutile particles w ith specific surface areas of 49.1 and 35.0 m 2/g were prepared by hydrothermal ly treating the acid peptized TiO 2 amorphous sols at relatively low temperatur es of 200 ℃ or 240 ℃, respectively. The formation of non-touching rutile part icles is attributed to high long-range electrostatic forces between particles i n the presence of the high concentration of the peptizer. The acid peptization w ould easily break the ≡Ti-O-Ti≡ bonds to form ≡Ti-OH or HO-Ti-OH species depending on the amount of acid, and create conditions for the formation of rut ile nuclei after structural rearrangements.
基金the National High Technology Research and Development Program of China(863 Program) (2012AA063203)Funded by Science and Technology Department of Yunnan Province (2011AA004)
文摘China is extremely poor in mineral resources of Platinum Group Metals (PGMs), productive output of PGMs from mineral resource is 2.5 tons per year. At the same time, China is the biggest PGMs consumption country in the world, the mineral resource of PGMs is critical shortage, it shows the importance of recycling the secondary resource of PGMs. Sino-Platinum Metals Resource (Yimen) Co., Ltd. is the leader in recycling of PGMs from secondary resource, and has made outstanding contributions to China PGMs secondary resources recycling. This article elucidates the current situation of secondary resources recovery and development of metallurgical technology for PGMs.
基金supported by the National Natural Science Foundation of China(50872055/E020703)Funding for Outstanding Doctoral Dissertation in NUAA(BCXJ1109)the Funding of Jiangsu Innovation Program for Graduate Education(CXLX11_0207)
文摘Pt and Ir coatings were produced by double glow plasma technology on the surface of Ti alloy substrates. The chemical compositions of the coatings were determined by X-ray diffraction and X-ray photoelectron spectroscopy. The microstructure and morphology of the coatings were observed by scanning electron microscopy. The hardness and elastic modulus of the coatings were estimated by nanoindentation. The measurements of adhesive forces of the coatings were performed with scratch tester. The results indicated that the Pt and Ir coatings displayed the preferred (220) orientation due to the initial nuclei with preferred growth on the surface of the substrates. The interface between the Pt coating and substrate exhibited no evidence of delamination. The Ir coating was composed of irregular columnar grains with many nanovoids at the interface between the coating and substrate. The mean values of hardness for Pt and Ir coatings were 0.9 GPa and 9 GPa, respectively. The elastic modulus of Pt and Ir coatings were 178 GPa and 339 GPa, respectively. The adhesive forces of the Pt and Ir coatings were about 66.4 N and 55 N, respectively. The Pt and Ir coatings adhered well to the Ti alloy substrates.
文摘Porous platinum electrodes were prepared by adding YSZ,as an active material,in platinum paste.Relationship between microstructure and electrochemical performance of O 2(g),Pt/YSZ electrode have been characterized by SEM and cyclic voltammetry.Results showed that the microstructure of platinum electrode is a significant impact on the cyclic voltammetry.With the increase of platinum electrode's porosity,the area of three-phase boundary of O 2(g) /Pt/YSZ was increased.The electrochemical reactivity was also enhanced.These were presented as the increase of current density and cathode voltage in cyclic voltammetry.
基金Project(50473046) supported by the National Natural Science Foundation of ChinaProject(204097) supported by the Science Foundation of the Ministry of Education of China+1 种基金Project(04JJ1002) supported by the Outstanding Youth Foundation of Hunan Province,ChinaProject(06JJ2008) supported by the Natural Science Foundation of Hunan Province,China
文摘A new cyclometalated platinum complex containing 2, 5-bis(naphthalene-1-yl)-1,3,4-oxadiazole ligand was synthesized and characterized. The UV-Vis absorptions and photoluminescent properties of the ligand and its platinum complex were investigated. A characteristic metal-ligand charge transfer absorption peak at 439 nm in the UV spectrum and a strong emission peak at 625 nm in the photoluminescence spectrum were observed for this complex in dichloromethane. Cyclic voltammtry (CV) analysis shows that the EHOMO (energy level of the highest occupied molecular orbital) and ELUMO (energy level of the lowest unoccupied molecular orbital) of the platinum complex are about 、5.69 and 、3.25 eV, respectively, indicating that the oxadiazole-based platinum complex has a potential application in electrophosphorescent devices used as a red-emitting material.
基金supported by the National Natural Science Foundation of China(Nos.22274037,22376055 and 21904032)the Natural Science Foundation of Hubei Province(2022CFB383)。
文摘Cancer metastasis is the leading cause of death in cancer patients worldwide and one of the major challenges in treating cancer.Circulating tumor cells(CTCs)play a pivotal role in cancer metastasis.However,the content of CTCs in peripheral blood is minimal,so the detection of CTCs in real samples is extremely challenging.Therefore,efficient enrichment and early detection of CTCs are essential to achieve timely diagnosis of diseases.In this work,we constructed an innovative and sensitive single-nanoparticle collision electrochemistry(SNCE)biosensor for the detection of MCF-7 cells(human breast cancer cells)by immunomagnetic separation technique and liposome signal amplification strategy.Liposomes embedded with platinum nanoparticles(Pt NPs)were used as signal probes,and homemade gold ultramicroelectrodes(Au UME)were used as the working electrodes.The effective collision between Pt NPs and UME would produce distinguishable step-type current.MCF-7 cells were accurately quantified according to the relationship between cell concentration and collision frequency(the number of step-type currents generated per unit time),realizing highly sensitive and specific detection of MCF-7 cells.The SNCE biosensor has a linear range of 10 cells·mL^(-1)to 10^(5) cells·mL^(-1)with a detection limit as low as 5 cells·mL^(-1).In addition,the successful detection of MCF-7 cells in complex samples showed that the SNCE biosensors have great potential for patient sample detection.
文摘The Fengshan porphyry-skam copper-molybdenum deposit is located in the southeastern Hubei Province, East China.Cu-Mo mineralization is hosted in the Fengshan quartz diorite porphyry stock that intruded the Triassic Daye Formation of carbonate rocks in the early Cretaceous(ca.140 Ma),as well as in the contact zone between these two,forming
文摘This paper discusses about the purity of strengthened pure platinum wire and the development method of platinum micro wire, in order to solve the difficulties of low tensile strength, easy to break, and low rate of micro wire. And it contrasts some performance of strengthened pure platinum wire and sponge Pt wire. The researches draw a conclusion that the thermoelectric properties of strengthened pure platinum micro wire was in accordance with national standards and satisfied users' requirements.
文摘Information on abundance and distribution of platinum\|group elements (PGE) in peridotite from ophiolite is relevant to understand the nature and evolution of the upper mantle. The ophiolite suite outcropping along the famous suture zone of Yarlung Zangbo River, Tibet, has attracted wide attention of geologists both in China and abroad. The Dagzhuka ophiolite of in the suture zone is thought to display a complete ophiolitic sequence. The peridotite from the Dazhuka ophiolite is composed of fairly fresh or unaltered lherzolite, harzburgite and minor dunite which are the upper mantle residuum formed by 15%～35% partial melting. In this paper we have mainly studied the abundance and distribution of PGE in the harzburgites and lherzolites. The harzburgites and lherzolites preserve total PGE contents of 28 37×10 -9 ～50 67×10 -9 respectively higher than Primitive mantle or the peridotite from some typical ophiolites and Alpine. They all have fractionated chondrite\|normalized PGE patterns with positive slopes from Ir to Pd (Fig.1), and Pd/Ir=1 13～2 40>1, Pd/Rh=2 23～7 49>1, and Pd/Pt=0 26～1 16 (average 0 67) higher than Primitive mantle (1 11, 2 35, 0 57) or CI\|chondrite (1 01, 2 73, 0 53). Consequently, the Dagzhuka peridotite are PGE\|enriched, but otherwise possess residual characteristics arising from a minimum of 15% partial melting. It is suggested that mantle residuum by partial melting have low total PGE contents, fractionated chondrite\|normalized PGE patterns with negative or slightly flat slopes from Ir to Pd, and Pd/Ir<1. But, the total PGE contents, chondrite\|normalized PGE patterns and Pt/Ir, Pd/Rh and Pd/Pt values of the Dagzhuka peridotite are completely inconsistent with a residual origin. Partial melting would have partitioned all sulfide in the source into the melt. In fact, no sulfide or silicate melt remained in the Dagzhuka peridotite. Therefore, PGE in Dagzhuka peridotite are not present in sulfides. The PGE\|enrichment and fractionation of the Dagzhuka peridotites seem to arise from mantle metasomatism of melts/fluid enrich incompatible elements include Pt and Pt, but not from residual or percolation of sulfides. The enrichment of Cs, Rb, Ba, Th, U and LREE in Dagzhuka peridotite also give a hint of the mantle metasomatism. The abundance and distribution of PGE in the peridotite from the Dagzhuka ophiolite show the nature and evolution of the Dagzhuka upper mantle are distinctive.
文摘In order to control the silver content in the preparation process of platinum group anti-cancer drugs, we put two kinds of color reagent to color in the production process of the platinum anti-cancer drugs by UV spectra measurement to control drugs production of platinum anticancer, thus we could control the silver content in the drugs so that it meets the pharmacopoeia standards of US and
文摘This paper introduces the research status and present situation of application of Pt/Ta composite anode materials for cathodic protection in China. It also introduces the corrosion resistance, bending properties and electrochemical performance in seawater and freshwater of the Pt/Ta composite anode materials for cathodic protection. It points out that compared with other platinum composite anodes, the Pt/Ta composite anode has the advantage of small volume, light weight, big drainage rate, long service life, it possesses superiority to be used in the confluence environment of sea water and fresh water and in the medium condition of resistivity changes at all times.
文摘The literary data on the application of various methods for the production of nanopowders of platinum metals and alloys have been summarized, and the selection of the method of chemical reduction from salt solutions has been substantiated as the simplest and most affordable. The optimum conditions for the production of nanoparticles of metal palladium and platinum/cobalt alloy, using the effect of boranes with various structures, have been selected.
基金supported by the National Nature Science Foundation of China(No.u0837601)
文摘Platinum group metals (PGM) include six elements, namely Pt, Pd, Rh, Ir, Os and Ru. PGM and their alloys are the important fundamental materials for modern industry and national defense construction, they have special physical and chemical properties, widely used in metallurgy, chemical, electric, electronic, information, energy, environmental protection, aviation, aerospace, navigation and other high technology industry. Platinum group metals and their alloys, which have good plasticity and processability, can be processed to electrical contact materials, resistance materials, solder, electronic paste, temperature-measurement materials, elastic materials, magnetic materials and high temperature structural materials.
文摘In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bushing.The diameter and microstructure of glass fibers have been investigated by scanning electron microscopy(SEM) and vertical optical microscope(VOM).The results indicated that the flow rate of molten glass was proportional to the diameter of glass fibers when the molten glass got main flow rate of 330 kg/h.The lower the flow rate was,the finer the average diameter was.
文摘Purpose: To establish a HPLC testing method of the content of bulk picoplatin and its impurities. Method: the separation was perform on a C18 column(4.6 mm×250 mm, 5 m) with potassium dihydrogen phosphate-aceton-itrile as the mobile phase at a flow rate of 1.0 mL/min. The detecting wavelength was set at 210 nm, and the column temperature was set at 30℃. Result: in the method validation, the linear relationship modulus of picoplatin is 0.9999, the systemic precision is 0.44%, the method precision is 0.74%, the average recovery rate is 99.62%, the LOD and LOQ of picoplatin is 0.2 ng and 1.0 ng. The average resolution of picoplatin and its impurities is more than 2. Conclusion: The established method is good specificity, high sensitivity, and good repeatability which could provide scientific evidence for the quality control of picoplatin and its impurities.
文摘The paper revealed the place and role of Russia in the global market of platinum metals, highlighted features of pricing in the export of Russian platinum group metals, the main problems of pricing in the export contracts related to the instability of markets and imperfect currency and customs legislation of the Russian Federation, proposed innovative ways to solutions to existing problems in the preparation and conclusion of export contracts.
基金The national SME technology innovation fund(11C26215305898)Kunming SME technology innovation fund(CJ2011040)
文摘The residual metal impurities in cisplatin, carboplatin and oxaliplatin were determined by ICP-AES. The samples were ignited and dissolved with HCl:HNO 3 (3:1). The method is simple and accurate. By the determination of the metal residues in the samples, the calculated actual daily exposure and concentration of the metal Pd, Ir, Rh, Ru, Mo, Ni, Cr, V, Cu, Mn, Fe and Zn that were less than the permitted daily exposures (PDE) and the limited concentration permitted in the EMEA guideline on the specification limits for residues of metal catalysts or metal reagents [1] . The metal residues can de adequately removed from the active pharmaceutical ingredients and the corresponding drugs. The trace metal residues will not affect human health and lead to the safety hazard by the intravenous injection.
文摘For the manufacture of S-type thermocouple the so-called thermocouple wire of platinum and platinum-rhodium alloy is used.One of the main technical requirements for the quality of the wire,according to State Standard of Russia(GOST 10821),is the uniformity of its largest thermoelectric force(Thermo-emf) in the length different sections.It was found that a determining impact on the uniformity of the wire thermo-emf is the distribution of rhodium along the length of the wire.The impact of platinum-rhodium melt crystallization conditions on the inhomogeneity of wire manufactured from it.It was suggested that the chemical inhomogeneity of the wire is related to the liquation phase of platinum-rhodium alloy.
