Small tunnels such as engineering geological exploratory tunnels and mine roadways are generally narrow, which make the existing photographic geological logging technique inapplicable. Therefore, geological logging of...Small tunnels such as engineering geological exploratory tunnels and mine roadways are generally narrow, which make the existing photographic geological logging technique inapplicable. Therefore, geological logging of exploratory tunnels has always been taking the method of manual sketch work which has low efficiency and poor informatization degree of products, and it is a technical issue requiring urgent settlement for geological logging of small tunnels. This paper proposes and studies novel methods of photographic geological logging suitable for small tunnels, including image acquisition, image orientation control, image geometric correction, unfolded image map generation and geological attitude measurement, etc. Experiments show that the method can meet the precision requirement of geological logging. The novel method helps to realize the fast acquisition and processing of image-based geological logging data for small tunnels, and the forms of logging result are more abundant and more applicable to informatized management and application of geological logging data.展开更多
A special experiment setup was designed to observe the interaction between bubbles and particle in flotation cell and to analyze the bubble characteristics such as bubble size, distribution and bubble-loading efficien...A special experiment setup was designed to observe the interaction between bubbles and particle in flotation cell and to analyze the bubble characteristics such as bubble size, distribution and bubble-loading efficiency. Bubbles in water-gas system and three-phase system were measured. The results indicate that with the current setup the bubbles as small as 10 μm can be easily distinguished. The average size of the bubbles generated under the given conditions in two-phase system is 410 μm at frother concentration of 0.004%, which is in good correspondence with the results of other works. The effect of frother on bubble size was probed. Increasing frother concentration from 0 to 0.004% causes a reduction of bubble size from 700 to 400 μm. The bubble loading efficiency was reported. The result indicates that the fine particle is more easily entrapped than the coarse particle. Some factors, which have effect on measurement accuracy were discussed. The aeration speed has a significant effect on the accuracy of results, if it surpasses 30 mL/s, and the image becomes unclear due to the entrapment of fine particle. Another factor, which can affect observing results, is the sampling position. At a wrong sampling position, the images become unclear.展开更多
The compressive sensing （CS） theory allows people to obtain signal in the frequency much lower than the requested one of sampling theorem. Because the theory is based on the assumption of that the location of sparse...The compressive sensing （CS） theory allows people to obtain signal in the frequency much lower than the requested one of sampling theorem. Because the theory is based on the assumption of that the location of sparse values is unknown, it has many constraints in practical applications. In fact, in many cases such as image processing, the location of sparse values is knowable, and CS can degrade to a linear process. In order to take full advantage of the visual information of images, this paper proposes the concept of dimensionality reduction transform matrix and then se- lects sparse values by constructing an accuracy control matrix, so on this basis, a degradation algorithm is designed that the signal can be obtained by the measurements as many as sparse values and reconstructed through a linear process. In comparison with similar methods, the degradation algorithm is effective in reducing the number of sensors and improving operational efficiency. The algorithm is also used to achieve the CS process with the same amount of data as joint photographic exports group （JPEG） compression and acquires the same display effect.展开更多
基金Project(201508)supported by the Open Research Foundation of Engineering Research Center for Rock-Soil Drilling & Excavation and Protection(Ministry of Education),ChinaProject(BK2012812)supported by the Natural Science Foundation of Jiangsu Province,China+1 种基金Project(KYLX_0492)supported by the University Postgraduate Scientific Research and Innovation Project of Jiangsu Province,ChinaProject(2014B38714)supported by the Fundamental Research Funds for the Central Universities,China
文摘Small tunnels such as engineering geological exploratory tunnels and mine roadways are generally narrow, which make the existing photographic geological logging technique inapplicable. Therefore, geological logging of exploratory tunnels has always been taking the method of manual sketch work which has low efficiency and poor informatization degree of products, and it is a technical issue requiring urgent settlement for geological logging of small tunnels. This paper proposes and studies novel methods of photographic geological logging suitable for small tunnels, including image acquisition, image orientation control, image geometric correction, unfolded image map generation and geological attitude measurement, etc. Experiments show that the method can meet the precision requirement of geological logging. The novel method helps to realize the fast acquisition and processing of image-based geological logging data for small tunnels, and the forms of logging result are more abundant and more applicable to informatized management and application of geological logging data.
文摘A special experiment setup was designed to observe the interaction between bubbles and particle in flotation cell and to analyze the bubble characteristics such as bubble size, distribution and bubble-loading efficiency. Bubbles in water-gas system and three-phase system were measured. The results indicate that with the current setup the bubbles as small as 10 μm can be easily distinguished. The average size of the bubbles generated under the given conditions in two-phase system is 410 μm at frother concentration of 0.004%, which is in good correspondence with the results of other works. The effect of frother on bubble size was probed. Increasing frother concentration from 0 to 0.004% causes a reduction of bubble size from 700 to 400 μm. The bubble loading efficiency was reported. The result indicates that the fine particle is more easily entrapped than the coarse particle. Some factors, which have effect on measurement accuracy were discussed. The aeration speed has a significant effect on the accuracy of results, if it surpasses 30 mL/s, and the image becomes unclear due to the entrapment of fine particle. Another factor, which can affect observing results, is the sampling position. At a wrong sampling position, the images become unclear.
基金supported by the National Natural Science Foundation of China (61077079)the Specialized Research Fund for the Doctoral Program of Higher Education (20102304110013)the Program Ex-cellent Academic Leaders of Harbin (2009RFXXG034)
文摘The compressive sensing （CS） theory allows people to obtain signal in the frequency much lower than the requested one of sampling theorem. Because the theory is based on the assumption of that the location of sparse values is unknown, it has many constraints in practical applications. In fact, in many cases such as image processing, the location of sparse values is knowable, and CS can degrade to a linear process. In order to take full advantage of the visual information of images, this paper proposes the concept of dimensionality reduction transform matrix and then se- lects sparse values by constructing an accuracy control matrix, so on this basis, a degradation algorithm is designed that the signal can be obtained by the measurements as many as sparse values and reconstructed through a linear process. In comparison with similar methods, the degradation algorithm is effective in reducing the number of sensors and improving operational efficiency. The algorithm is also used to achieve the CS process with the same amount of data as joint photographic exports group （JPEG） compression and acquires the same display effect.
