The accurate prediction of peak overpressure of explosion shockwaves is significant in fields such as explosion hazard assessment and structural protection, where explosion shockwaves serve as typical destructive elem...The accurate prediction of peak overpressure of explosion shockwaves is significant in fields such as explosion hazard assessment and structural protection, where explosion shockwaves serve as typical destructive elements. Aiming at the problem of insufficient accuracy of the existing physical models for predicting the peak overpressure of ground reflected waves, two physics-informed machine learning models are constructed. The results demonstrate that the machine learning models, which incorporate physical information by predicting the deviation between the physical model and actual values and adding a physical loss term in the loss function, can accurately predict both the training and out-oftraining dataset. Compared to existing physical models, the average relative error in the predicted training domain is reduced from 17.459%-48.588% to 2%, and the proportion of average relative error less than 20% increased from 0% to 59.4% to more than 99%. In addition, the relative average error outside the prediction training set range is reduced from 14.496%-29.389% to 5%, and the proportion of relative average error less than 20% increased from 0% to 71.39% to more than 99%. The inclusion of a physical loss term enforcing monotonicity in the loss function effectively improves the extrapolation performance of machine learning. The findings of this study provide valuable reference for explosion hazard assessment and anti-explosion structural design in various fields.展开更多
The modified sum-peak method estimates radioactivity by using only the peak and the sum-peak count rates.To verify the modified sum-peak method,the dependence of the full energy peak efficiency on the source-to-detect...The modified sum-peak method estimates radioactivity by using only the peak and the sum-peak count rates.To verify the modified sum-peak method,the dependence of the full energy peak efficiency on the source-to-detector distance in a high-purity germanium detector system was studied using a Geant4 Monte Carlo simulation.The effect of the deadlayer in the germanium crystal was estimated by reference to experiments on 241 Am and the relative efficiency of the detector.The peak efficiency dependence on the source-to-detector distance was compared between the simulation and measurements.The modified sum-peak method is discussed with respect to these peak efficiencies.展开更多
In this paper the Hamming distance is used to contr ol individual difference in the process of creating an original population, and a peak-depot is established to preserve information of different peak-points. So me n...In this paper the Hamming distance is used to contr ol individual difference in the process of creating an original population, and a peak-depot is established to preserve information of different peak-points. So me new methods are also put forward to improve optimization performance of genet ic algorithm, such as point-cast method and neighborhood search strategy around peak-points. The methods are used to deal with genetic operation besides of cr ossover and mutation, in order to obtain a global optimum solution and avoid GA ’s premature convergence. By means of many control rules and a peak-depot, the new algorithm carries out optimum search surrounding several peak-points. Alon g with evolution of individuals of population, the fitness of peak-points of pe ak-depot increases continually, and a global optimum solution can be obtained. The new algorithm searches around several peak-points, which increases the prob ability to obtain the global optimum solution to the best. By using some example s to test the modified genetic algorithm, the results indicate what we have done makes the modified genetic algorithm effectively to solve both of linear optimi zation problems and nonlinear optimization problems with restrictive functions.展开更多
Wind data were collected during the 2011 typhoon Meari at heights of 10, 20, 30, and 40 m above the ground using a 40 m high anemometer tower in the coastal area near Shanghai Pudong International Airport. Wind speeds...Wind data were collected during the 2011 typhoon Meari at heights of 10, 20, 30, and 40 m above the ground using a 40 m high anemometer tower in the coastal area near Shanghai Pudong International Airport. Wind speeds and directions, turbulence intensities, gust factors, and peaks were analyzed using the time records of wind speed. The results show that turbulence intensity components in longitudinal, lateral, and vertical directions decrease with mean wind speed, regardless of elevations, and the turbulence intensities are in a linear relationship with mean wind speeds. The ratios of three turbulence intensity components(i.e. Iu, Iv, Iw) at heights of 10, 20 and 40 m were calculated and equal to be 1:0.88:0.50, 1:0.84:0.57, and 1:0.9:0.49, respectively. In addition, the gust factors in three directions exhibit a reduction with increasing mean wind speed. The peak factors at different heights show a similar trend and slightly decrease with mean wind speed; average peak factors for all 10-min data from Typhoon Meari are 2.43, 2.48, and 2.47, respectively.展开更多
The key challenge of the extended target probability hypothesis density (ET-PHD) filter is to reduce the computational complexity by using a subset to approximate the full set of partitions. In this paper, the influen...The key challenge of the extended target probability hypothesis density (ET-PHD) filter is to reduce the computational complexity by using a subset to approximate the full set of partitions. In this paper, the influence for the tracking results of different partitions is analyzed, and the form of the most informative partition is obtained. Then, a fast density peak-based clustering (FDPC) partitioning algorithm is applied to the measurement set partitioning. Since only one partition of the measurement set is used, the ET-PHD filter based on FDPC partitioning has lower computational complexity than the other ET-PHD filters. As FDPC partitioning is able to remove the spatially close clutter-generated measurements, the ET-PHD filter based on FDPC partitioning has good tracking performance in the scenario with more clutter-generated measurements. The simulation results show that the proposed algorithm can get the most informative partition and obviously reduce computational burden without losing tracking performance. As the number of clutter-generated measurements increased, the ET-PHD filter based on FDPC partitioning has better tracking performance than other ET-PHD filters. The FDPC algorithm will play an important role in the engineering realization of the multiple extended target tracking filter.展开更多
In this paper, using the MSISE-90 model as the reference atmosphere, we discuss the feasibility and method of deducing the peak densities of the undisturbed atomic oxygen profiles in the MLT region (the mesosphere and...In this paper, using the MSISE-90 model as the reference atmosphere, we discuss the feasibility and method of deducing the peak densities of the undisturbed atomic oxygen profiles in the MLT region (the mesosphere and lower thermosphere region) from OI (557.7 nm) night airglow intersities. The peak densities for different seasons, latitudes and longitudes are deduced from OI (557.7nm) airglow intensities through this expression. We analyze the features of inversion relative errors and discuss the influence of the variations in temperature on inversion errors. The results indicate that all inversion errors are less than 5% except for those at high altitudes in the summer hemisphere. And the impact of the variations in temperature on errors is not significant.展开更多
A relationship is established, using the least squares method, between the standard enthalpy of formation and the standard enthalpy of formation divided by the exothermic denitration decomposition peak absolute temper...A relationship is established, using the least squares method, between the standard enthalpy of formation and the standard enthalpy of formation divided by the exothermic denitration decomposition peak absolute temperature corresponding to β →0.展开更多
The SF6 decomposed products are very alike,so the peaks of the SF6 decomposed products are overlapped.It make us hard to quantitatively calculate.This paper introduced a method to separate the overlapped chromatogram ...The SF6 decomposed products are very alike,so the peaks of the SF6 decomposed products are overlapped.It make us hard to quantitatively calculate.This paper introduced a method to separate the overlapped chromatogram peaks with iterative curve-fitting and Gauss function,and deduced the formula of the iterative curve-fitting;provided a method to calculate the initial value of the peaks intensity and width by iterative formula,and confirm the final peaks intensity and width to separate the overlapped signals.By the analysis of the real chromatogram data,it proved the validity of this method on the main components used in distinguishing the GIS internal defects.This method overcomes the influence of SF6 peak to the other thin concentration peaks,so it can be used in the study of the quantitative analysis of the decomposed products on different failures and different voltages.展开更多
文摘The accurate prediction of peak overpressure of explosion shockwaves is significant in fields such as explosion hazard assessment and structural protection, where explosion shockwaves serve as typical destructive elements. Aiming at the problem of insufficient accuracy of the existing physical models for predicting the peak overpressure of ground reflected waves, two physics-informed machine learning models are constructed. The results demonstrate that the machine learning models, which incorporate physical information by predicting the deviation between the physical model and actual values and adding a physical loss term in the loss function, can accurately predict both the training and out-oftraining dataset. Compared to existing physical models, the average relative error in the predicted training domain is reduced from 17.459%-48.588% to 2%, and the proportion of average relative error less than 20% increased from 0% to 59.4% to more than 99%. In addition, the relative average error outside the prediction training set range is reduced from 14.496%-29.389% to 5%, and the proportion of relative average error less than 20% increased from 0% to 71.39% to more than 99%. The inclusion of a physical loss term enforcing monotonicity in the loss function effectively improves the extrapolation performance of machine learning. The findings of this study provide valuable reference for explosion hazard assessment and anti-explosion structural design in various fields.
文摘The modified sum-peak method estimates radioactivity by using only the peak and the sum-peak count rates.To verify the modified sum-peak method,the dependence of the full energy peak efficiency on the source-to-detector distance in a high-purity germanium detector system was studied using a Geant4 Monte Carlo simulation.The effect of the deadlayer in the germanium crystal was estimated by reference to experiments on 241 Am and the relative efficiency of the detector.The peak efficiency dependence on the source-to-detector distance was compared between the simulation and measurements.The modified sum-peak method is discussed with respect to these peak efficiencies.
文摘In this paper the Hamming distance is used to contr ol individual difference in the process of creating an original population, and a peak-depot is established to preserve information of different peak-points. So me new methods are also put forward to improve optimization performance of genet ic algorithm, such as point-cast method and neighborhood search strategy around peak-points. The methods are used to deal with genetic operation besides of cr ossover and mutation, in order to obtain a global optimum solution and avoid GA ’s premature convergence. By means of many control rules and a peak-depot, the new algorithm carries out optimum search surrounding several peak-points. Alon g with evolution of individuals of population, the fitness of peak-points of pe ak-depot increases continually, and a global optimum solution can be obtained. The new algorithm searches around several peak-points, which increases the prob ability to obtain the global optimum solution to the best. By using some example s to test the modified genetic algorithm, the results indicate what we have done makes the modified genetic algorithm effectively to solve both of linear optimi zation problems and nonlinear optimization problems with restrictive functions.
基金Projects(51378396,51678452,51708074,2014M560706)supported by General Program of National Natural Science Foundation of ChinaProject(2014M560706)supported by the China Postdoctoral Science Foundation
文摘Wind data were collected during the 2011 typhoon Meari at heights of 10, 20, 30, and 40 m above the ground using a 40 m high anemometer tower in the coastal area near Shanghai Pudong International Airport. Wind speeds and directions, turbulence intensities, gust factors, and peaks were analyzed using the time records of wind speed. The results show that turbulence intensity components in longitudinal, lateral, and vertical directions decrease with mean wind speed, regardless of elevations, and the turbulence intensities are in a linear relationship with mean wind speeds. The ratios of three turbulence intensity components(i.e. Iu, Iv, Iw) at heights of 10, 20 and 40 m were calculated and equal to be 1:0.88:0.50, 1:0.84:0.57, and 1:0.9:0.49, respectively. In addition, the gust factors in three directions exhibit a reduction with increasing mean wind speed. The peak factors at different heights show a similar trend and slightly decrease with mean wind speed; average peak factors for all 10-min data from Typhoon Meari are 2.43, 2.48, and 2.47, respectively.
基金supported by the National Natural Science Foundation of China(61401475)
文摘The key challenge of the extended target probability hypothesis density (ET-PHD) filter is to reduce the computational complexity by using a subset to approximate the full set of partitions. In this paper, the influence for the tracking results of different partitions is analyzed, and the form of the most informative partition is obtained. Then, a fast density peak-based clustering (FDPC) partitioning algorithm is applied to the measurement set partitioning. Since only one partition of the measurement set is used, the ET-PHD filter based on FDPC partitioning has lower computational complexity than the other ET-PHD filters. As FDPC partitioning is able to remove the spatially close clutter-generated measurements, the ET-PHD filter based on FDPC partitioning has good tracking performance in the scenario with more clutter-generated measurements. The simulation results show that the proposed algorithm can get the most informative partition and obviously reduce computational burden without losing tracking performance. As the number of clutter-generated measurements increased, the ET-PHD filter based on FDPC partitioning has better tracking performance than other ET-PHD filters. The FDPC algorithm will play an important role in the engineering realization of the multiple extended target tracking filter.
基金Supported by the National Science Foundation of China (40225011, 40336054)National Research Project (G2000078407)project of CAS (KZCX3-SW-217)International Collaboration Research Team Program of the Chinese Academy of Sciencesthe China-Russia Joint Research Center on Space WeatherChinese Academy of Sciences
文摘In this paper, using the MSISE-90 model as the reference atmosphere, we discuss the feasibility and method of deducing the peak densities of the undisturbed atomic oxygen profiles in the MLT region (the mesosphere and lower thermosphere region) from OI (557.7 nm) night airglow intersities. The peak densities for different seasons, latitudes and longitudes are deduced from OI (557.7nm) airglow intensities through this expression. We analyze the features of inversion relative errors and discuss the influence of the variations in temperature on inversion errors. The results indicate that all inversion errors are less than 5% except for those at high altitudes in the summer hemisphere. And the impact of the variations in temperature on errors is not significant.
基金Supported by the National Creative Research Group Science Foundation of China （600421002） and the New Century 151 Talent Projects of Zhejiang Province
文摘为不明确的线性分离系统的一个班的 peak-to-peak 获得最小化的一条矩阵不平等途径被学习。我们最小化 * 是导致的 L 标准上的最好的上面的界限的 -norm, 由与逃避不了的椭圆体围住可达到的集合获得了，而不是直接最小化导致的 L 标准。基于这个想法，柔韧的 peak-to-peak 获得最小化的问题和控制器合成被归结为解决一套矩阵不平等的可行性问题。一个数字例子被用来表明介绍方法的可行性和有效性。
文摘A relationship is established, using the least squares method, between the standard enthalpy of formation and the standard enthalpy of formation divided by the exothermic denitration decomposition peak absolute temperature corresponding to β →0.
基金Project Supported by National Natural Science Foundation of China （ 50777070）, Science and Technique Project of Chongqing （CSTC, 2007AC2041 ）.
文摘The SF6 decomposed products are very alike,so the peaks of the SF6 decomposed products are overlapped.It make us hard to quantitatively calculate.This paper introduced a method to separate the overlapped chromatogram peaks with iterative curve-fitting and Gauss function,and deduced the formula of the iterative curve-fitting;provided a method to calculate the initial value of the peaks intensity and width by iterative formula,and confirm the final peaks intensity and width to separate the overlapped signals.By the analysis of the real chromatogram data,it proved the validity of this method on the main components used in distinguishing the GIS internal defects.This method overcomes the influence of SF6 peak to the other thin concentration peaks,so it can be used in the study of the quantitative analysis of the decomposed products on different failures and different voltages.
