Capacity reduction is a major problem faced by wireless mesh networks. An efficient way to alleviate this problem is proper channel assignment. Current end-toend channel assignment schemes usually focus on the case wh...Capacity reduction is a major problem faced by wireless mesh networks. An efficient way to alleviate this problem is proper channel assignment. Current end-toend channel assignment schemes usually focus on the case where channels in distinct frequency bands are assigned to mesh access and backbone, but actually backbone network and access network can use the same IEEE 802.11 technology. Besides, these channel assignment schemes only utilize orthogonal channels to perform channel assignment, and the resulting network interference dramatically degrades network performance. Moreover, Internet-oriented traffic is considered only, and peerto-peer traffic is omitted, or vice versa. The traffic type does not match the practical network. In this paper, we explore how to exploit partially overlapped channels to perform endto-end channel assignment in order to achieve effective end-to-end flow transmissions. The proposed flow-based end-to-end channel assignment schemes can conquer the limitations aforementioned. Simulations reveal that loadaware channel assignment can be applied to networks with stable traffic load, and it can achieve near-optimal performance; Traffic-irrelevant channel assignment is suitable for networks with frequent change of traffic load,and it can achieve good balance between performance and overhead. Also, partially overlapped channels' capability of improving network performance is situation-dependent, they should be used carefully.展开更多
This paper presents an innovative eccentric jacket substructure for offshore wind turbines to better withstand intense environmental forces and to replace conventional X-braced jackets in seismically active areas. The...This paper presents an innovative eccentric jacket substructure for offshore wind turbines to better withstand intense environmental forces and to replace conventional X-braced jackets in seismically active areas. The proposed eccentric jacket comprises of completely overlapped joint at every joint connection. The joint consists of a chord and two braces in a single plane. The two braces are fully overlapped with a short segment of the diagonal brace welded directly onto the chord. The characteristic feature of this joint configuration is that the short segment member can be designed to absorb and dissipate energy under cyclic load excitation. The experimental and numerical study revealed that the completely overlapped joint performed better in terms of strength resistance, stiffness, ductility, and energy absorption capacity than the conventional gap joints commonly found in typical X-braced jacket framings. The eccentric jacket could also be designed to becoming less stiff, with an inelastic yielding and local buckling of short segment member, so as to better resist the cyclic load generated from intense environmental forces and earthquake. From the design economics, the eccentric jacket provided a more straightforward fabrication with reduced number of welded joints and shorter thicker wall cans than the conventional X-braced jacket. It can therefore be concluded based on the results presented in the study that by designing the short segment member in accordance with strength and ductility requirement,the eccentric jacket substructure supporting the wind turbine could be made to remain stable under gravity loads and to sustain a significantly large amount of motion in the event of rare and intense earthquake or environmental forces, without collapsing.展开更多
We present our experimental ablation results for partially overlapped dual nanosecond laser beams(PO-DB)on metal and glass surfaces.Numerical simulations are performed to evaluate the crater reduction potential of the...We present our experimental ablation results for partially overlapped dual nanosecond laser beams(PO-DB)on metal and glass surfaces.Numerical simulations are performed to evaluate the crater reduction potential of the PO-DB setup.Damage probability experiments proved the collaboration of two beams within the overlap region.Bright-field and three-dimensional profile measurements verify the reduced ablation area from the proposed PODB scheme.Laser-induced plasma is generated when transparent glass is ablated.Atomic emission of Na I(~589.95nm)shows comparable signal between the PO-DB set and the traditional single laser beam set.The proposed PO-DB ablation mechanism could also be applied to femtosecond laser systems.展开更多
The major challenge faced by wireless mesh networks is the capacity reduction caused by interference,and interference can be reduced or even eliminated through appropriate channel assignment.This article presents a co...The major challenge faced by wireless mesh networks is the capacity reduction caused by interference,and interference can be reduced or even eliminated through appropriate channel assignment.This article presents a comprehensive survey of channel assignment schemes for multicast in multi-radio multi-channel wireless mesh networks.We analyze the state-of-the-art channel assignment schemes for multicast and provide comprehensive taxonomy of the latest work.In general,we classify the channel assignment schemes for multicast into two types,that is,sequential multicast routing and channel assignment(SMRCA)and joint multicast routing and channel assignment(JMRCA).Detailed review of channel assignment schemes in each category is provided.Possible future research directions and corresponding solutions are also explored to motivate research interests in the field of channel assignment for multicast in wireless mesh networks.展开更多
Overlapped X domain multiplexing(Ov XDM) is a promising encoding technique to obtain high spectral efficiency by utilizing Inter-Symbol Interference(ISI). However, the computational complexity of Maximum Likelihood Se...Overlapped X domain multiplexing(Ov XDM) is a promising encoding technique to obtain high spectral efficiency by utilizing Inter-Symbol Interference(ISI). However, the computational complexity of Maximum Likelihood Sequence Detection(MLSD) increases exponentially with the growth of spectral efficiency in Ov XDM, which is unbearable for practical implementations. This paper proposes an Ov TDM decoding method based on Recurrent Neural Network(RNN) to realize fast decoding of Ov TDM system, which has lower decoding complexity than the traditional fast decoding method. The paper derives the mathematical model of the Ov TDM decoder based on RNN and constructs the decoder model. And we compare the performance of the proposed decoding method with the MLSD algorithm and the Fano algorithm. It’s verified that the proposed decoding method exhibits a higher performance than the traditional fast decoding algorithm, especially for the scenarios of a high overlapped multiplexing coefficient.展开更多
Overlapped x domain multiplexing(OVXDM) is a promising encoding technique to obtain high spectral efficiency by utilizing inter-symbol interference(ISI) intelligently. However, the computational complexity of maximum ...Overlapped x domain multiplexing(OVXDM) is a promising encoding technique to obtain high spectral efficiency by utilizing inter-symbol interference(ISI) intelligently. However, the computational complexity of maximum likelihood sequence detection(MLSD) increases exponentially with the growth of spectral efficiency in OVXDM, which is unbearable for practical implementations. In this paper, based on a novel path metric associating adjacent symbols, we propose a multi-bit sliding stack decoding(Multi-Bit SSD) algorithm to achieve multiple-bit decoding simultaneously in OVXDM. Theoretical analysis is provided for the algorithm, which indicates the relationship between the performance and parameters including multiplexing waveform, overlapping fold and sliding window size. Simulation results show that the proposed algorithm can achieve better decoding performance and higher spectral efficiency than conventional fast decoding algorithms.展开更多
Based on the Overlapped Multiplexing Principle[12],a frequency domain OVFDM(Overlapped Frequency Domain Multiplexing) Coding is proposed.By the data weighted shift overlapped version of any band-limited Multiplexing T...Based on the Overlapped Multiplexing Principle[12],a frequency domain OVFDM(Overlapped Frequency Domain Multiplexing) Coding is proposed.By the data weighted shift overlapped version of any band-limited Multiplexing Transfer Function H(f) the coding gain and spectral efficiency are both achieved.The heavier the overlap of the data weighted Multiplexing Transfer Function H(f),the higher the coding gain and spectral efficiency as well as the closer the output to the optimum complex Gaussian distribution.The bit error probability performance is estimated.The time domain OVTDM(Overlapped Time Domain Multiplexing) Coding,the dual of OVFDM in time domain is incidentally proposed as well.Both theoretical analysis and testified simulations show that OVFDM(OVTDM) is suitable for high spectral efficiency application and its spectral efficiency is only roughly linear to SNR rather than the well-known logarithm to SNR.展开更多
Overlapped time domain multiplexing(OvTDM)is an innovative encoding scheme that can obtain high spectral efficiency.However,the intentional inter-symbol interference(ISI)caused by OvTDM will make the decoding process ...Overlapped time domain multiplexing(OvTDM)is an innovative encoding scheme that can obtain high spectral efficiency.However,the intentional inter-symbol interference(ISI)caused by OvTDM will make the decoding process more complex.The computational complexity of maximum likelihood sequence detection increases exponentially with the growth of spectral efficiency in OvTDM.As a consequence of high complexity,the decoding effort for a given spectral efficiency may occasionally exceed the physical limitations of the decoder,leading inevitably to buffer overflows and information erasures.In this paper,we propose a bidirectional Viterbi algorithm(BVA)based on the bidirectional sequence decoding for OvTDM.With the BVA,the decoding operation starts simultaneously from the both ends of the corresponding trellis and stops at the middle of trellis.The simulation results show that compared with Viterbi algorithm(VA),the decoding time of BVA can be reduced by about half.And the memory space of two decoders in BVA are about half of that in VA,which means that the BVA has lower memory requirements for decoder.And the decoding performance of BVA is almost the same as VA.展开更多
It is popularly admitted that the foreign language learning is strongly influenced by learners' first language. Generally speaking,the interference of Chinese with ELL is divided into negative transfer and positiv...It is popularly admitted that the foreign language learning is strongly influenced by learners' first language. Generally speaking,the interference of Chinese with ELL is divided into negative transfer and positive transfer, which are manifested at various levels during ELL. The thesis aims to show the interference of Chinese with ELL, with the approach of qualitative analysis, the paper is arranged intoPart I: Introduction; Part II: The Contrast between ELL and Chinese Language Acquisition; Part III: The Influence of Chinese on ELL:Part VI: Conclusion. Being aware of the interference of Chinese with ELL will help students overcome the obstacles and promote ELL.展开更多
通过重叠延伸PCR(gene splicing by overlap extension,SOE-PCR)扩增黄曲霉寡聚-1,6-葡萄糖苷酶基因和酿酒酵母α-信号肽序列,定向重组到整合型表达载体pδRCMB中,并在CICC1346中实现分泌表达;然后通过同源建模、利用分子模拟软件Discov...通过重叠延伸PCR(gene splicing by overlap extension,SOE-PCR)扩增黄曲霉寡聚-1,6-葡萄糖苷酶基因和酿酒酵母α-信号肽序列,定向重组到整合型表达载体pδRCMB中,并在CICC1346中实现分泌表达;然后通过同源建模、利用分子模拟软件Discovery Studio 4.1分析其蛋白结构,以对硝基苯-α-D-葡萄糖吡喃苷(pNPG)为底物,建立并确定酶活反应条件,并进行纯化、酶学性质分析;将密码子优化后序列在CICC1346中实现分泌表达,利用淀粉进行共发酵实验。结果显示:重组酶突变后相对野生型蛋白结构无影响。SDS-PAGE分析重组重组酶大小约为70 kDa;优化后最高酶活达到0.69 U/m L,重组酶最适pH为6.5,在pH4.5.0~7.0维持90%以上的酶活;最适温度为40℃,在30~40℃维持接近100%的酶活;受Cu^(2+)和Mn^(2+)严格抑制;寡聚-1,6-葡萄糖苷酶与α-淀粉酶及糖化酶协同利用淀粉产乙醇,提高淀粉水解效率。这是首次报道黄曲霉的寡聚-1,6-葡萄糖苷酶基因在酿酒酵母整合型分泌表达。展开更多
Community detection is an important methodology for understanding the intrinsic structure and function of a realworld network. In this paper, we propose an effective and efficient algorithm, called Dominant Label Prop...Community detection is an important methodology for understanding the intrinsic structure and function of a realworld network. In this paper, we propose an effective and efficient algorithm, called Dominant Label Propagation Algorithm（Abbreviated as DLPA）, to detect communities in complex networks. The algorithm simulates a special voting process to detect overlapping and non-overlapping community structure in complex networks simultaneously. Our algorithm is very efficient, since its computational complexity is almost linear to the number of edges in the network. Experimental results on both real-world and synthetic networks show that our algorithm also possesses high accuracies on detecting community structure in networks.展开更多
目的比较反穿刺法与Overlap法在全腹腔镜全胃切除术(totally laparoscopic total gastrectomy,TLTG)食管空肠吻合中的应用效果。方法回顾性分析我院2017年1月~2018年12月75例TLTG的临床资料,依据食管空肠重建方式不同,分为反穿刺组(n=41...目的比较反穿刺法与Overlap法在全腹腔镜全胃切除术(totally laparoscopic total gastrectomy,TLTG)食管空肠吻合中的应用效果。方法回顾性分析我院2017年1月~2018年12月75例TLTG的临床资料,依据食管空肠重建方式不同,分为反穿刺组(n=41)和Overlap组(n=34)。结果75例均顺利完成全TLTG。与Overlap组比较,反穿刺组吻合时间[(46.4±6.3)min vs(52.9±4.6)min,t=-5.028,P=0.000]和术后住院时间[(11.0±1.3)d vs(11.6±1.2)d,t=-2.363,P=0.021]明显缩短,住院费用明显减少[(44720.7±3499.2)元vs.(48164.6±5536.5)元,t=-3.274,P=0.002],但肠道恢复时间显著延长[(3.8±1.1)d vs.(3.2±0.6)d,t=2.675,P=0.009]。2组总手术时间、术中出血量、清扫淋巴结数目差异无统计学意义(P>0.05)。结论全腹腔镜下食管空肠吻合术管型吻合的反穿刺法和线型吻合的Overlap法均安全可行,但反穿刺法在吻合时间和手术费用上更有优势。展开更多
In marine engineering,appendages such as fin stabilizers and/or T-foils are made to rotate and to reduce the motion of ships.Research on the hydrodynamics of ships fitted with active appendages has significantly impro...In marine engineering,appendages such as fin stabilizers and/or T-foils are made to rotate and to reduce the motion of ships.Research on the hydrodynamics of ships fitted with active appendages has significantly improved the design and control of such ships.However,most studies focus on fixed rather than rotating appendages,thereby ignoring the hydrodynamic unsteadiness of active appendages.To enhance the reliability and precision of the numerical simulations,we propose the use of overlapping grids for simulating advanced catamarans fitted with a pair of rotating T-foils under each bow.The fundamental purpose of the overlapping grid technique is to realize information exchange via regional overlap sharing in each subdomain of the computing domain,instead of using the method of boundary sharing,thus greatly alleviating the difficulty of generating the subdomain grid;moreover,the technique guarantees the quality of the subdomain grid.Within the main computational domain,a subdomain was allocated to accommodate the T-foil.Overlapping meshes near the interface between the two domains enable information flow during the simulation;the overlapping grids are updated at every iteration step because the subdomain rotates.The instantaneous trim and sinkage responses of the catamaran to the T-foil rotation were reproduced.From the moment the active T-foil stopped moving,there was no change in the ship’s sailing attitude,indicating that the response was in real time.By comparing with EFD data,the numerical results showed reasonable agreement,indicating the feasibility and effectiveness of the technique in simulating the hydrodynamics of ships fitted with active appendages.展开更多
Irregular shape workface would result in the presence of coal pillar, which leads to high stress concentration and possibly induces coal bumps. In order to study the coal bump mechanism of pillars, static and dynamic ...Irregular shape workface would result in the presence of coal pillar, which leads to high stress concentration and possibly induces coal bumps. In order to study the coal bump mechanism of pillars, static and dynamic stress overlapping(SDSO) method was proposed to explain the impacts of static stress concentration and tremors induced by mining activities. The stress and deformation in surrounding rock of mining face were analyzed based on the field case study at 1303 workface in Zhaolou Coal Mine in China.The results illustrate that the surrounding rock of a workface could be divided into four different zones,i.e., residual stress zone, stress decrease zone, stress increase zone and original stress zone. The stress increase zone is prone to failure under the SDSO impact loading conditions and will provide elastic energy for inducing coal bump. Based on the numerical modelling results, the evolution of static stress in coal pillar as the size of gob increasing was studied, and the impact of dynamic stress was investigated through analyzing the characteristics of tremor activities. The numerical results demonstrate the peak value of vertical stress in coal pillar rises from about 30 MPa with mining distance 10 m to 52.6 MPa with mining distance 120 m, and the location of peak stress transfers to the inner zone of coal pillars as the workface moves forward. For the daily tremor activities, tremors with high energy released indicate high dynamic stress disturbance on the surrounding rock, therefore, the impact of dynamic stressing is more serious during workface extension period because the tremor frequency and average energy after workface extension are higher than those before the workface extension.展开更多
基金supported by the National Natural Science Foundation of China under Grants No.61373124
文摘Capacity reduction is a major problem faced by wireless mesh networks. An efficient way to alleviate this problem is proper channel assignment. Current end-toend channel assignment schemes usually focus on the case where channels in distinct frequency bands are assigned to mesh access and backbone, but actually backbone network and access network can use the same IEEE 802.11 technology. Besides, these channel assignment schemes only utilize orthogonal channels to perform channel assignment, and the resulting network interference dramatically degrades network performance. Moreover, Internet-oriented traffic is considered only, and peerto-peer traffic is omitted, or vice versa. The traffic type does not match the practical network. In this paper, we explore how to exploit partially overlapped channels to perform endto-end channel assignment in order to achieve effective end-to-end flow transmissions. The proposed flow-based end-to-end channel assignment schemes can conquer the limitations aforementioned. Simulations reveal that loadaware channel assignment can be applied to networks with stable traffic load, and it can achieve near-optimal performance; Traffic-irrelevant channel assignment is suitable for networks with frequent change of traffic load,and it can achieve good balance between performance and overhead. Also, partially overlapped channels' capability of improving network performance is situation-dependent, they should be used carefully.
文摘This paper presents an innovative eccentric jacket substructure for offshore wind turbines to better withstand intense environmental forces and to replace conventional X-braced jackets in seismically active areas. The proposed eccentric jacket comprises of completely overlapped joint at every joint connection. The joint consists of a chord and two braces in a single plane. The two braces are fully overlapped with a short segment of the diagonal brace welded directly onto the chord. The characteristic feature of this joint configuration is that the short segment member can be designed to absorb and dissipate energy under cyclic load excitation. The experimental and numerical study revealed that the completely overlapped joint performed better in terms of strength resistance, stiffness, ductility, and energy absorption capacity than the conventional gap joints commonly found in typical X-braced jacket framings. The eccentric jacket could also be designed to becoming less stiff, with an inelastic yielding and local buckling of short segment member, so as to better resist the cyclic load generated from intense environmental forces and earthquake. From the design economics, the eccentric jacket provided a more straightforward fabrication with reduced number of welded joints and shorter thicker wall cans than the conventional X-braced jacket. It can therefore be concluded based on the results presented in the study that by designing the short segment member in accordance with strength and ductility requirement,the eccentric jacket substructure supporting the wind turbine could be made to remain stable under gravity loads and to sustain a significantly large amount of motion in the event of rare and intense earthquake or environmental forces, without collapsing.
基金the National Natural Science Foundation of China under Grant Nos 61525503 and 41603059the National Key Research and Development Project of China under Grant No 2016YFC14000701the Shenzhen Basic Research Project(JCY20160428092445411).
文摘We present our experimental ablation results for partially overlapped dual nanosecond laser beams(PO-DB)on metal and glass surfaces.Numerical simulations are performed to evaluate the crater reduction potential of the PO-DB setup.Damage probability experiments proved the collaboration of two beams within the overlap region.Bright-field and three-dimensional profile measurements verify the reduced ablation area from the proposed PODB scheme.Laser-induced plasma is generated when transparent glass is ablated.Atomic emission of Na I(~589.95nm)shows comparable signal between the PO-DB set and the traditional single laser beam set.The proposed PO-DB ablation mechanism could also be applied to femtosecond laser systems.
基金supported by the National Natural Science Foundation of China under Grants No.61373124
文摘The major challenge faced by wireless mesh networks is the capacity reduction caused by interference,and interference can be reduced or even eliminated through appropriate channel assignment.This article presents a comprehensive survey of channel assignment schemes for multicast in multi-radio multi-channel wireless mesh networks.We analyze the state-of-the-art channel assignment schemes for multicast and provide comprehensive taxonomy of the latest work.In general,we classify the channel assignment schemes for multicast into two types,that is,sequential multicast routing and channel assignment(SMRCA)and joint multicast routing and channel assignment(JMRCA).Detailed review of channel assignment schemes in each category is provided.Possible future research directions and corresponding solutions are also explored to motivate research interests in the field of channel assignment for multicast in wireless mesh networks.
基金supported by the National Natural Science Foundation of China under Grant No.61871049.
文摘Overlapped X domain multiplexing(Ov XDM) is a promising encoding technique to obtain high spectral efficiency by utilizing Inter-Symbol Interference(ISI). However, the computational complexity of Maximum Likelihood Sequence Detection(MLSD) increases exponentially with the growth of spectral efficiency in Ov XDM, which is unbearable for practical implementations. This paper proposes an Ov TDM decoding method based on Recurrent Neural Network(RNN) to realize fast decoding of Ov TDM system, which has lower decoding complexity than the traditional fast decoding method. The paper derives the mathematical model of the Ov TDM decoder based on RNN and constructs the decoder model. And we compare the performance of the proposed decoding method with the MLSD algorithm and the Fano algorithm. It’s verified that the proposed decoding method exhibits a higher performance than the traditional fast decoding algorithm, especially for the scenarios of a high overlapped multiplexing coefficient.
基金supported by the Fundamental Research Funds for the Central Universities under grant 2016XD-01
文摘Overlapped x domain multiplexing(OVXDM) is a promising encoding technique to obtain high spectral efficiency by utilizing inter-symbol interference(ISI) intelligently. However, the computational complexity of maximum likelihood sequence detection(MLSD) increases exponentially with the growth of spectral efficiency in OVXDM, which is unbearable for practical implementations. In this paper, based on a novel path metric associating adjacent symbols, we propose a multi-bit sliding stack decoding(Multi-Bit SSD) algorithm to achieve multiple-bit decoding simultaneously in OVXDM. Theoretical analysis is provided for the algorithm, which indicates the relationship between the performance and parameters including multiplexing waveform, overlapping fold and sliding window size. Simulation results show that the proposed algorithm can achieve better decoding performance and higher spectral efficiency than conventional fast decoding algorithms.
基金The NNSF(National Nature Science Foundation)of China for their continuously long term support by key projects
文摘Based on the Overlapped Multiplexing Principle[12],a frequency domain OVFDM(Overlapped Frequency Domain Multiplexing) Coding is proposed.By the data weighted shift overlapped version of any band-limited Multiplexing Transfer Function H(f) the coding gain and spectral efficiency are both achieved.The heavier the overlap of the data weighted Multiplexing Transfer Function H(f),the higher the coding gain and spectral efficiency as well as the closer the output to the optimum complex Gaussian distribution.The bit error probability performance is estimated.The time domain OVTDM(Overlapped Time Domain Multiplexing) Coding,the dual of OVFDM in time domain is incidentally proposed as well.Both theoretical analysis and testified simulations show that OVFDM(OVTDM) is suitable for high spectral efficiency application and its spectral efficiency is only roughly linear to SNR rather than the well-known logarithm to SNR.
文摘Overlapped time domain multiplexing(OvTDM)is an innovative encoding scheme that can obtain high spectral efficiency.However,the intentional inter-symbol interference(ISI)caused by OvTDM will make the decoding process more complex.The computational complexity of maximum likelihood sequence detection increases exponentially with the growth of spectral efficiency in OvTDM.As a consequence of high complexity,the decoding effort for a given spectral efficiency may occasionally exceed the physical limitations of the decoder,leading inevitably to buffer overflows and information erasures.In this paper,we propose a bidirectional Viterbi algorithm(BVA)based on the bidirectional sequence decoding for OvTDM.With the BVA,the decoding operation starts simultaneously from the both ends of the corresponding trellis and stops at the middle of trellis.The simulation results show that compared with Viterbi algorithm(VA),the decoding time of BVA can be reduced by about half.And the memory space of two decoders in BVA are about half of that in VA,which means that the BVA has lower memory requirements for decoder.And the decoding performance of BVA is almost the same as VA.
文摘It is popularly admitted that the foreign language learning is strongly influenced by learners' first language. Generally speaking,the interference of Chinese with ELL is divided into negative transfer and positive transfer, which are manifested at various levels during ELL. The thesis aims to show the interference of Chinese with ELL, with the approach of qualitative analysis, the paper is arranged intoPart I: Introduction; Part II: The Contrast between ELL and Chinese Language Acquisition; Part III: The Influence of Chinese on ELL:Part VI: Conclusion. Being aware of the interference of Chinese with ELL will help students overcome the obstacles and promote ELL.
文摘通过重叠延伸PCR(gene splicing by overlap extension,SOE-PCR)扩增黄曲霉寡聚-1,6-葡萄糖苷酶基因和酿酒酵母α-信号肽序列,定向重组到整合型表达载体pδRCMB中,并在CICC1346中实现分泌表达;然后通过同源建模、利用分子模拟软件Discovery Studio 4.1分析其蛋白结构,以对硝基苯-α-D-葡萄糖吡喃苷(pNPG)为底物,建立并确定酶活反应条件,并进行纯化、酶学性质分析;将密码子优化后序列在CICC1346中实现分泌表达,利用淀粉进行共发酵实验。结果显示:重组酶突变后相对野生型蛋白结构无影响。SDS-PAGE分析重组重组酶大小约为70 kDa;优化后最高酶活达到0.69 U/m L,重组酶最适pH为6.5,在pH4.5.0~7.0维持90%以上的酶活;最适温度为40℃,在30~40℃维持接近100%的酶活;受Cu^(2+)和Mn^(2+)严格抑制;寡聚-1,6-葡萄糖苷酶与α-淀粉酶及糖化酶协同利用淀粉产乙醇,提高淀粉水解效率。这是首次报道黄曲霉的寡聚-1,6-葡萄糖苷酶基因在酿酒酵母整合型分泌表达。
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61173093 and 61202182)the Postdoctoral Science Foundation of China(Grant No.2012 M521776)+2 种基金the Fundamental Research Funds for the Central Universities of Chinathe Postdoctoral Science Foundation of Shannxi Province,Chinathe Natural Science Basic Research Plan of Shaanxi Province,China(Grant Nos.2013JM8019 and 2014JQ8359)
文摘Community detection is an important methodology for understanding the intrinsic structure and function of a realworld network. In this paper, we propose an effective and efficient algorithm, called Dominant Label Propagation Algorithm（Abbreviated as DLPA）, to detect communities in complex networks. The algorithm simulates a special voting process to detect overlapping and non-overlapping community structure in complex networks simultaneously. Our algorithm is very efficient, since its computational complexity is almost linear to the number of edges in the network. Experimental results on both real-world and synthetic networks show that our algorithm also possesses high accuracies on detecting community structure in networks.
基金Supported by the National Natural Science Foundation of China(Grant No.51509053)
文摘In marine engineering,appendages such as fin stabilizers and/or T-foils are made to rotate and to reduce the motion of ships.Research on the hydrodynamics of ships fitted with active appendages has significantly improved the design and control of such ships.However,most studies focus on fixed rather than rotating appendages,thereby ignoring the hydrodynamic unsteadiness of active appendages.To enhance the reliability and precision of the numerical simulations,we propose the use of overlapping grids for simulating advanced catamarans fitted with a pair of rotating T-foils under each bow.The fundamental purpose of the overlapping grid technique is to realize information exchange via regional overlap sharing in each subdomain of the computing domain,instead of using the method of boundary sharing,thus greatly alleviating the difficulty of generating the subdomain grid;moreover,the technique guarantees the quality of the subdomain grid.Within the main computational domain,a subdomain was allocated to accommodate the T-foil.Overlapping meshes near the interface between the two domains enable information flow during the simulation;the overlapping grids are updated at every iteration step because the subdomain rotates.The instantaneous trim and sinkage responses of the catamaran to the T-foil rotation were reproduced.From the moment the active T-foil stopped moving,there was no change in the ship’s sailing attitude,indicating that the response was in real time.By comparing with EFD data,the numerical results showed reasonable agreement,indicating the feasibility and effectiveness of the technique in simulating the hydrodynamics of ships fitted with active appendages.
基金financially supported by National Science and Technology Key Project Fund of China (Nos.2016YFC0801401 and 2016YFC0600708)Fundamental Research Funds for the Central Universities of China (No.2009QM01)Yue Qi Distinguished Scholar Project,China University of Mining & Technology,Beijing,China
文摘Irregular shape workface would result in the presence of coal pillar, which leads to high stress concentration and possibly induces coal bumps. In order to study the coal bump mechanism of pillars, static and dynamic stress overlapping(SDSO) method was proposed to explain the impacts of static stress concentration and tremors induced by mining activities. The stress and deformation in surrounding rock of mining face were analyzed based on the field case study at 1303 workface in Zhaolou Coal Mine in China.The results illustrate that the surrounding rock of a workface could be divided into four different zones,i.e., residual stress zone, stress decrease zone, stress increase zone and original stress zone. The stress increase zone is prone to failure under the SDSO impact loading conditions and will provide elastic energy for inducing coal bump. Based on the numerical modelling results, the evolution of static stress in coal pillar as the size of gob increasing was studied, and the impact of dynamic stress was investigated through analyzing the characteristics of tremor activities. The numerical results demonstrate the peak value of vertical stress in coal pillar rises from about 30 MPa with mining distance 10 m to 52.6 MPa with mining distance 120 m, and the location of peak stress transfers to the inner zone of coal pillars as the workface moves forward. For the daily tremor activities, tremors with high energy released indicate high dynamic stress disturbance on the surrounding rock, therefore, the impact of dynamic stressing is more serious during workface extension period because the tremor frequency and average energy after workface extension are higher than those before the workface extension.
