To research the effect of the selection method of multi — objects genetic algorithm problem on optimizing result, this method is analyzed theoretically and discussed by using an autonomous underwater vehicle (AUV) as...To research the effect of the selection method of multi — objects genetic algorithm problem on optimizing result, this method is analyzed theoretically and discussed by using an autonomous underwater vehicle (AUV) as an object. A changing weight value method is put forward and a selection formula is modified. Some experiments were implemented on an AUV, TwinBurger. The results shows that this method is effective and feasible.展开更多
One of the most critical and complicated steps in mine design is a selection of suitable mining method based upon geological,geotechnical,geographical,safety and economical parameters.The aim of this study is developi...One of the most critical and complicated steps in mine design is a selection of suitable mining method based upon geological,geotechnical,geographical,safety and economical parameters.The aim of this study is developing a Monte Carlo simulation to selection the optimum mining method by using effective and major criteria and at the same time,taking subjective judgments of decision makers into consideration.Proposed approach is based on the combination of Monte Carlo simulation with conventional Analytic Hierarchy Process(AHP).Monte Carlo simulation is used to determine the confdence level of each alternative’s score,is calculated by AHP,with the respect to the variance of decision makers’opinion.The proposed method is applied for Jajarm Bauxite Mine in Iran and eventually the most appropriate mining methods for this mine are ranked.展开更多
Ground hydraulic fracturing plays a crucial role in controlling the far-field hard roof,making it imperative to identify the most suitable target stratum for effective control.Physical experiments are conducted based ...Ground hydraulic fracturing plays a crucial role in controlling the far-field hard roof,making it imperative to identify the most suitable target stratum for effective control.Physical experiments are conducted based on engineering properties to simulate the gradual collapse of the roof during longwall top coal caving(LTCC).A numerical model is established using the material point method(MPM)and the strain-softening damage constitutive model according to the structure of the physical model.Numerical simulations are conducted to analyze the LTCC process under different hard roofs for ground hydraulic fracturing.The results show that ground hydraulic fracturing releases the energy and stress of the target stratum,resulting in a substantial lag in the fracturing of the overburden before collapse occurs in the hydraulic fracturing stratum.Ground hydraulic fracturing of a low hard roof reduces the lag effect of hydraulic fractures,dissipates the energy consumed by the fracture of the hard roof,and reduces the abutment stress.Therefore,it is advisable to prioritize the selection of the lower hard roof as the target stratum.展开更多
Mining method selection is the first and the most critical problem in mine design and depends on some parameters such as geotechnical and geological features and economic and geographic factors. In this paper, the fac...Mining method selection is the first and the most critical problem in mine design and depends on some parameters such as geotechnical and geological features and economic and geographic factors. In this paper, the factors affecting mining method selection are determined. These factors include shape, thick- ness, depth, slope, RMR and RSS of the orebody, RMR and RSS of the hanging wall and footwall. Then, the priorities of these factors are calculated. In order to calculate the priorities of factors and select the best mining method for Qapiliq salt mine, Iran, based on these priorities, fuzzy analytical hierarchy process （AHP） technique is used. For this purpose, a questionnaire was prepared and was given to the associated experts. Finally, after a comparison carried out based on the effective factors, between the four mining methods including area mining, room and pillar, cut and fill and stope and pillar methods, the stope and nillar mining method was selected as the most suitable method to this mine.展开更多
Nowadays, the technology of renewable sources grid-connection and DC transmission has a rapid development. And phasor measurement units(PMUs) become more notable in power grids, due to the necessary of real time monit...Nowadays, the technology of renewable sources grid-connection and DC transmission has a rapid development. And phasor measurement units(PMUs) become more notable in power grids, due to the necessary of real time monitoring and close-loop control applications. However, the PMUs data quality issue affects applications based on PMUs a lot. This paper proposes a simple yet effective method for recovering PMU data. To simply the issue, two different scenarios of PMUs data loss are first defined. Then a key combination of preferred selection strategies is introduced. And the missing data is recovered by the function of spline interpolation. This method has been tested by artificial data and field data obtained from on-site PMUs. The results demonstrate that the proposed method recovers the missing PMU data quickly and accurately. And it is much better than other methods when missing data are massive and continuous. This paper also presents the interesting direction for future work.展开更多
Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational ...Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational analysis theory to screen out candidate drill bits with reference values.A new comprehensive performance evaluation model of drill bit was established by constructing the absolute ideal solution,changing the relative distance measurement method,and introducing entropy weight to work out the closeness between the candidate drill bits and ideal drill bits and select the reasonable drill bit.Through the construction of absolute ideal solution,improvement of relative distance measurement method and introduction of entropy weight,the inherent defects of TOPSIS decision analysis method,such as non-absolute order,reverse order and unreasonable weight setting,can be overcome.Simple in calculation and easy to understand,the new bit selection method has good adaptability to drill bit selection using dynamic change drill bit database.Field application has proved that the drill bits selected by the new drill bit selection method had significant increase in average rate of penetration,low wear rate,and good compatibility with the drilled formations in actual drilling.This new method of drill bit selection can be used as a technical means to select drill bits with high efficiency,long life and good economics in oilfields.展开更多
The fruit-bearing quantities of nut Korean pines (Pinus Koraiensis) of natural stands in Changbai Mountain, Xiaoxing'an Mountain, and Wanda Mountain and of artificial forest in Hegang area of Heilongjiang Province...The fruit-bearing quantities of nut Korean pines (Pinus Koraiensis) of natural stands in Changbai Mountain, Xiaoxing'an Mountain, and Wanda Mountain and of artificial forest in Hegang area of Heilongjiang Province were investigated and measured by seed collection of singletree during 1988–1998. In order to evaluate the elite nut tree of fructification, the characteristics of fructification of Korena pine, including, the fruit-bearing quantity, output of seed, quantity of cone, cone size, seed size, the ratio of null seed by solid seed, seed percentage of cone, rate of the cones infested with pest, and fruit-bearing index, etc., were analyzed with the variance analysis, multiple comparison and stepwise regression to obtain the contribution ratio of each fruit-bearing factor to fruit-bearing quantity. The multiple correlation factors and the partial correlation factors for fruit-bearing quantities of Korean pine were determined for different geographical areas, and the cone length, thousand-grain-weight, and the seed percentage of cone were considered as important indices for selection of elite trees. The method of modified weighted coefficients was adopted to select the elite nut trees of Korean pine. Standards for selecting elite nut trees from the natural stands and artificial forest of Korean pine were established. This study could provde selection method and standard of elite nut trees for setting up seed orchard of Korean Pine.展开更多
The Cu-Zr-Ce-O catalysts prepared using the coprecipitation method exhibited better catalytic performance for CO selective oxidation. The Cu-Zr-Ce-O catalysts pretreated with different methods were studied by CO-TPR a...The Cu-Zr-Ce-O catalysts prepared using the coprecipitation method exhibited better catalytic performance for CO selective oxidation. The Cu-Zr-Ce-O catalysts pretreated with different methods were studied by CO-TPR and XPS techniques. The results showed that the Cu-Zr-Ce-O catalyst pretreated with oxygen exhibited the best catalytic performance and had the widest operating temperature window, with CO conversion above 99% from 160 to 200 ℃. The O2 pretreatment caused an enrichment of the oxygen storaged on the Cu active species and promoted the conversion of adsorbed oxygen into surface lattice oxygen. It also improved the amount of Cu＋/Cu^2＋ ionic pair, and then facilitated the formation of CuO active species on the catalyst for selective CO oxidation.展开更多
In order to improve the adaptiveness of TV/L2-based image denoising algorithm in differ- ent signal-to-noise ratio （SNR） environments, an iterative denoising method with automatic parame- ter selection is proposed. ...In order to improve the adaptiveness of TV/L2-based image denoising algorithm in differ- ent signal-to-noise ratio （SNR） environments, an iterative denoising method with automatic parame- ter selection is proposed. Based upon the close connection between optimization function of denois- ing problem and regularization parameter, an updating model is built to select the regularized param- eter. Both the parameter and the objective function are dynamically updated in alternating minimiza- tion iterations, consequently, it can make the algorithm work in different SNR environments. Mean- while, a strategy for choosing the initial regularization parameter is presented. Considering Morozov discrepancy principle, a convex function with respect to the regularization parameter is modeled. Via the optimization method, it is easy and fast to find the convergence value of parameter, which is suitable for the iterative image denoising algorithm. Comparing with several state-of-the-art algo- rithms, many experiments confirm that the denoising algorithm with the proposed parameter selec- tion is highly effective to evaluate peak signal-to-noise ratio （PSNR） and structural similarity展开更多
For the accurate extraction of cavity decay time, a selection of data points is supplemented to the weighted least square method. We derive the expected precision, accuracy and computation cost of this improved method...For the accurate extraction of cavity decay time, a selection of data points is supplemented to the weighted least square method. We derive the expected precision, accuracy and computation cost of this improved method, and examine these performances by simulation. By comparing this method with the nonlinear least square fitting （NLSF） method and the linear regression of the sum （LRS） method in derivations and simulations, we find that this method can achieve the same or even better precision, comparable accuracy, and lower computation cost. We test this method by experimental decay signals. The results are in agreement with the ones obtained from the nonlinear least square fitting method.展开更多
With the low cost and low hardware complex considerations,cooperative systems are a tendency in the future communications.This work considers the secure cooperative communications systems.For a practical situation in ...With the low cost and low hardware complex considerations,cooperative systems are a tendency in the future communications.This work considers the secure cooperative communications systems.For a practical situation in the system,the scenario includes multiple source stations,multiple relay stations,multiple destination stations,and eavesdroppers.To analyze the optimal relay selection in the system,we begin with the performance analysis for a single source station and a single destination station.By applying two cooperative models,the amplify-andforward（AF） mode and decode-and-forward（DF）mode,the secrecy capacity is derived.Then,we apply the derived results to the considered environment to find the optimal relay assignment.By the way,the relay selection can be obtained by the exhaustive search algorithm.However,there are a lot of steps needed if the number of source stations is large.Hence,applying the characters of the cooperative modes in the relay selection,the pre-selection step is proposed with a mathematical derivation.It could be used for the practical situation without a long-time calculation.展开更多
文摘To research the effect of the selection method of multi — objects genetic algorithm problem on optimizing result, this method is analyzed theoretically and discussed by using an autonomous underwater vehicle (AUV) as an object. A changing weight value method is put forward and a selection formula is modified. Some experiments were implemented on an AUV, TwinBurger. The results shows that this method is effective and feasible.
文摘One of the most critical and complicated steps in mine design is a selection of suitable mining method based upon geological,geotechnical,geographical,safety and economical parameters.The aim of this study is developing a Monte Carlo simulation to selection the optimum mining method by using effective and major criteria and at the same time,taking subjective judgments of decision makers into consideration.Proposed approach is based on the combination of Monte Carlo simulation with conventional Analytic Hierarchy Process(AHP).Monte Carlo simulation is used to determine the confdence level of each alternative’s score,is calculated by AHP,with the respect to the variance of decision makers’opinion.The proposed method is applied for Jajarm Bauxite Mine in Iran and eventually the most appropriate mining methods for this mine are ranked.
基金the National Natural Science Foundation of China(No.51974042)National Key Research and Development Program of China(No.2023YFC3009005).
文摘Ground hydraulic fracturing plays a crucial role in controlling the far-field hard roof,making it imperative to identify the most suitable target stratum for effective control.Physical experiments are conducted based on engineering properties to simulate the gradual collapse of the roof during longwall top coal caving(LTCC).A numerical model is established using the material point method(MPM)and the strain-softening damage constitutive model according to the structure of the physical model.Numerical simulations are conducted to analyze the LTCC process under different hard roofs for ground hydraulic fracturing.The results show that ground hydraulic fracturing releases the energy and stress of the target stratum,resulting in a substantial lag in the fracturing of the overburden before collapse occurs in the hydraulic fracturing stratum.Ground hydraulic fracturing of a low hard roof reduces the lag effect of hydraulic fractures,dissipates the energy consumed by the fracture of the hard roof,and reduces the abutment stress.Therefore,it is advisable to prioritize the selection of the lower hard roof as the target stratum.
文摘Mining method selection is the first and the most critical problem in mine design and depends on some parameters such as geotechnical and geological features and economic and geographic factors. In this paper, the factors affecting mining method selection are determined. These factors include shape, thick- ness, depth, slope, RMR and RSS of the orebody, RMR and RSS of the hanging wall and footwall. Then, the priorities of these factors are calculated. In order to calculate the priorities of factors and select the best mining method for Qapiliq salt mine, Iran, based on these priorities, fuzzy analytical hierarchy process （AHP） technique is used. For this purpose, a questionnaire was prepared and was given to the associated experts. Finally, after a comparison carried out based on the effective factors, between the four mining methods including area mining, room and pillar, cut and fill and stope and pillar methods, the stope and nillar mining method was selected as the most suitable method to this mine.
基金supported in part by National Natural Science Foundation of China(NSFC)(51627811,51707064)Project Supported by the National Key Research and Development Program of China(2017YFB090204)Project of State Grid Corporation of China(SGTYHT/16-JS-198)
文摘Nowadays, the technology of renewable sources grid-connection and DC transmission has a rapid development. And phasor measurement units(PMUs) become more notable in power grids, due to the necessary of real time monitoring and close-loop control applications. However, the PMUs data quality issue affects applications based on PMUs a lot. This paper proposes a simple yet effective method for recovering PMU data. To simply the issue, two different scenarios of PMUs data loss are first defined. Then a key combination of preferred selection strategies is introduced. And the missing data is recovered by the function of spline interpolation. This method has been tested by artificial data and field data obtained from on-site PMUs. The results demonstrate that the proposed method recovers the missing PMU data quickly and accurately. And it is much better than other methods when missing data are massive and continuous. This paper also presents the interesting direction for future work.
基金Supported by China National Science and Technology Major Project(2016ZX05020-006)。
文摘Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational analysis theory to screen out candidate drill bits with reference values.A new comprehensive performance evaluation model of drill bit was established by constructing the absolute ideal solution,changing the relative distance measurement method,and introducing entropy weight to work out the closeness between the candidate drill bits and ideal drill bits and select the reasonable drill bit.Through the construction of absolute ideal solution,improvement of relative distance measurement method and introduction of entropy weight,the inherent defects of TOPSIS decision analysis method,such as non-absolute order,reverse order and unreasonable weight setting,can be overcome.Simple in calculation and easy to understand,the new bit selection method has good adaptability to drill bit selection using dynamic change drill bit database.Field application has proved that the drill bits selected by the new drill bit selection method had significant increase in average rate of penetration,low wear rate,and good compatibility with the drilled formations in actual drilling.This new method of drill bit selection can be used as a technical means to select drill bits with high efficiency,long life and good economics in oilfields.
基金Sciences and Technology Office of Heilongjiang Province (a grant G99B5-10).
文摘The fruit-bearing quantities of nut Korean pines (Pinus Koraiensis) of natural stands in Changbai Mountain, Xiaoxing'an Mountain, and Wanda Mountain and of artificial forest in Hegang area of Heilongjiang Province were investigated and measured by seed collection of singletree during 1988–1998. In order to evaluate the elite nut tree of fructification, the characteristics of fructification of Korena pine, including, the fruit-bearing quantity, output of seed, quantity of cone, cone size, seed size, the ratio of null seed by solid seed, seed percentage of cone, rate of the cones infested with pest, and fruit-bearing index, etc., were analyzed with the variance analysis, multiple comparison and stepwise regression to obtain the contribution ratio of each fruit-bearing factor to fruit-bearing quantity. The multiple correlation factors and the partial correlation factors for fruit-bearing quantities of Korean pine were determined for different geographical areas, and the cone length, thousand-grain-weight, and the seed percentage of cone were considered as important indices for selection of elite trees. The method of modified weighted coefficients was adopted to select the elite nut trees of Korean pine. Standards for selecting elite nut trees from the natural stands and artificial forest of Korean pine were established. This study could provde selection method and standard of elite nut trees for setting up seed orchard of Korean Pine.
基金supported by the National Nature Science Foundation of China (Project No.20576023)the Natural Science Foundation of Guangdong Province (Project No.06025660).
文摘The Cu-Zr-Ce-O catalysts prepared using the coprecipitation method exhibited better catalytic performance for CO selective oxidation. The Cu-Zr-Ce-O catalysts pretreated with different methods were studied by CO-TPR and XPS techniques. The results showed that the Cu-Zr-Ce-O catalyst pretreated with oxygen exhibited the best catalytic performance and had the widest operating temperature window, with CO conversion above 99% from 160 to 200 ℃. The O2 pretreatment caused an enrichment of the oxygen storaged on the Cu active species and promoted the conversion of adsorbed oxygen into surface lattice oxygen. It also improved the amount of Cu＋/Cu^2＋ ionic pair, and then facilitated the formation of CuO active species on the catalyst for selective CO oxidation.
基金Supported by the National High Technology Research and Development Program of China(863Program)(2012AA8012011C)
文摘In order to improve the adaptiveness of TV/L2-based image denoising algorithm in differ- ent signal-to-noise ratio （SNR） environments, an iterative denoising method with automatic parame- ter selection is proposed. Based upon the close connection between optimization function of denois- ing problem and regularization parameter, an updating model is built to select the regularized param- eter. Both the parameter and the objective function are dynamically updated in alternating minimiza- tion iterations, consequently, it can make the algorithm work in different SNR environments. Mean- while, a strategy for choosing the initial regularization parameter is presented. Considering Morozov discrepancy principle, a convex function with respect to the regularization parameter is modeled. Via the optimization method, it is easy and fast to find the convergence value of parameter, which is suitable for the iterative image denoising algorithm. Comparing with several state-of-the-art algo- rithms, many experiments confirm that the denoising algorithm with the proposed parameter selec- tion is highly effective to evaluate peak signal-to-noise ratio （PSNR） and structural similarity
基金supported by the Preeminent Youth Fund of Sichuan Province,China(Grant No.2012JQ0012)the National Natural Science Foundation of China(Grant Nos.11173008,10974202,and 60978049)the National Key Scientific and Research Equipment Development Project of China(Grant No.ZDYZ2013-2)
文摘For the accurate extraction of cavity decay time, a selection of data points is supplemented to the weighted least square method. We derive the expected precision, accuracy and computation cost of this improved method, and examine these performances by simulation. By comparing this method with the nonlinear least square fitting （NLSF） method and the linear regression of the sum （LRS） method in derivations and simulations, we find that this method can achieve the same or even better precision, comparable accuracy, and lower computation cost. We test this method by experimental decay signals. The results are in agreement with the ones obtained from the nonlinear least square fitting method.
文摘With the low cost and low hardware complex considerations,cooperative systems are a tendency in the future communications.This work considers the secure cooperative communications systems.For a practical situation in the system,the scenario includes multiple source stations,multiple relay stations,multiple destination stations,and eavesdroppers.To analyze the optimal relay selection in the system,we begin with the performance analysis for a single source station and a single destination station.By applying two cooperative models,the amplify-andforward（AF） mode and decode-and-forward（DF）mode,the secrecy capacity is derived.Then,we apply the derived results to the considered environment to find the optimal relay assignment.By the way,the relay selection can be obtained by the exhaustive search algorithm.However,there are a lot of steps needed if the number of source stations is large.Hence,applying the characters of the cooperative modes in the relay selection,the pre-selection step is proposed with a mathematical derivation.It could be used for the practical situation without a long-time calculation.
