The flexible transmission shaft and wheel propeller are combined as the kinetic source equipment, which realizes the nmlti-motion modes of the autonomous underwater vehicle （AUV） such as vectored thruster and wheele...The flexible transmission shaft and wheel propeller are combined as the kinetic source equipment, which realizes the nmlti-motion modes of the autonomous underwater vehicle （AUV） such as vectored thruster and wheeled movement. In order to study the interactional principle between the hull and the wheel propellers while the AUV navigating in water, the computational fluid dynamics （CFD） method is used to simulate numerically the unsteady viscous flow around AUV with propellers by using the Reynolds-averaged Navier-Stokes （RANS） equations, shear-stress transport （SST） k-w model and pressure with splitting of operators （PISO） algorithm based on sliding mesh. The hydrodynamic parameters of AUV with propellers such as resistance, pressure and velocity are got, which reflect well the real ambient flow field of AUV with propellers. Then, the semi-implicit method for pressure-linked equations （SIMPLE） algorithm is used to compute the steady viscous flow field of AUV hull and propellers, respectively. The computational results agree well with the experimental data, which shows that the numerical method has good accuracy in the prediction of hydrodynamic performance. The interaction between AUV hull and wheel propellers is predicted qualitatively and quantitatively by comparing the hydrodynamic parameters such as resistance, pressure and velocity with those from integral computation and partial computation of the viscous flow around AUV with propellers, which provides an effective reference to the shady on noise and vibration of AUV hull and propellers in real environment. It also provides technical support for the design of new AUVs.展开更多
The micro modeling for electric vehicle and its solution were investigated. A new car-following model for electric vehicle was proposed based on the existing car-following models. The impacts of the electric vehicle&#...The micro modeling for electric vehicle and its solution were investigated. A new car-following model for electric vehicle was proposed based on the existing car-following models. The impacts of the electric vehicle's charging electricity were studied from the numerical perspective. The numerical results show that the electric vehicle's charging electricity will destroy the stability of uniform flow and produce some prominent queues and these traffic phenomena are directly related to the initial headway, the distance between two adjacent charging stations and the number of charging stations. The above results can help traffic engineer to choose the position of charging station and the electric vehicle's driver to adjust his/her driving behavior in the traffic system with charging station.展开更多
This paper reports the design, construction, and operation of NWPU20 Micro Air Vehicle (MAV), which is the smallest that has, up to now, been developed in PR China. The miniaturization level in PR China makes smaller ...This paper reports the design, construction, and operation of NWPU20 Micro Air Vehicle (MAV), which is the smallest that has, up to now, been developed in PR China. The miniaturization level in PR China makes smaller MAV, in our opinion, not possible to implement. The NWPU20 is a 20-centimeter span, battery powered, fixed-wing aircraft with an off-the-shelf color video camera that can transmit live video back to the ground station. The on-board electronic subsystems are smallest and lightest among the commercial products, including an 8-gram wireless video camera, an 8-gram receiver, a 5-gram electronic speed controller (ESC), two 4.5-gram fully proportional radio frequency control servos, and the total mass of NWPU20 is less than 80 grams. An experimental model was fabricated and tested in the Low Turbulent Flow Wind Tunnel (LTFWT) at Northwestern Polytechnical University (NWPU) to research low Reynolds number flow characteristics of the NWPU20. The result of the wind tunnel test shows that stall angle of attack of NWPU20 can reach 30°, which is higher than that of the general aircrafts, and the maximum lift-to-drag ratio of NWPU20 can nearly reach 6 at the angle of attack of 10°, which can satisfy design requirements of the NWPU20. A small-sized propulsion/torque testing system was developed to measure and analyze the propulsion and torque performances of the motor-propeller combination used in the NWPU20. A center of gravity (c.g.) testing apparatus was developed and used to adjust the c.g. of the NWPU20 so that it has good longitudinal static stability and control. The NWPU20 prototype has undergone successfully flight tests many times; it flies at 32 kilometers per hour, with an endurance of 15 minutes, and a maximum communications range of 300 meters. With the color video camera, NWPU20 successfully transmits real-time video back to the ground station. The success of NWPU20 proves preliminarily that 20-centimeter span micro air vehicle is feasible and usable.展开更多
基金Project(2006AA09Z235) supported by National High Technology Research and Development Program of ChinaProject(CX2009B003) supported by Hunan Provincial Innovation Foundation For Postgraduate,China
文摘The flexible transmission shaft and wheel propeller are combined as the kinetic source equipment, which realizes the nmlti-motion modes of the autonomous underwater vehicle （AUV） such as vectored thruster and wheeled movement. In order to study the interactional principle between the hull and the wheel propellers while the AUV navigating in water, the computational fluid dynamics （CFD） method is used to simulate numerically the unsteady viscous flow around AUV with propellers by using the Reynolds-averaged Navier-Stokes （RANS） equations, shear-stress transport （SST） k-w model and pressure with splitting of operators （PISO） algorithm based on sliding mesh. The hydrodynamic parameters of AUV with propellers such as resistance, pressure and velocity are got, which reflect well the real ambient flow field of AUV with propellers. Then, the semi-implicit method for pressure-linked equations （SIMPLE） algorithm is used to compute the steady viscous flow field of AUV hull and propellers, respectively. The computational results agree well with the experimental data, which shows that the numerical method has good accuracy in the prediction of hydrodynamic performance. The interaction between AUV hull and wheel propellers is predicted qualitatively and quantitatively by comparing the hydrodynamic parameters such as resistance, pressure and velocity with those from integral computation and partial computation of the viscous flow around AUV with propellers, which provides an effective reference to the shady on noise and vibration of AUV hull and propellers in real environment. It also provides technical support for the design of new AUVs.
基金Project(71271016)supported the National Natural Science Foundation of China
文摘The micro modeling for electric vehicle and its solution were investigated. A new car-following model for electric vehicle was proposed based on the existing car-following models. The impacts of the electric vehicle's charging electricity were studied from the numerical perspective. The numerical results show that the electric vehicle's charging electricity will destroy the stability of uniform flow and produce some prominent queues and these traffic phenomena are directly related to the initial headway, the distance between two adjacent charging stations and the number of charging stations. The above results can help traffic engineer to choose the position of charging station and the electric vehicle's driver to adjust his/her driving behavior in the traffic system with charging station.
文摘This paper reports the design, construction, and operation of NWPU20 Micro Air Vehicle (MAV), which is the smallest that has, up to now, been developed in PR China. The miniaturization level in PR China makes smaller MAV, in our opinion, not possible to implement. The NWPU20 is a 20-centimeter span, battery powered, fixed-wing aircraft with an off-the-shelf color video camera that can transmit live video back to the ground station. The on-board electronic subsystems are smallest and lightest among the commercial products, including an 8-gram wireless video camera, an 8-gram receiver, a 5-gram electronic speed controller (ESC), two 4.5-gram fully proportional radio frequency control servos, and the total mass of NWPU20 is less than 80 grams. An experimental model was fabricated and tested in the Low Turbulent Flow Wind Tunnel (LTFWT) at Northwestern Polytechnical University (NWPU) to research low Reynolds number flow characteristics of the NWPU20. The result of the wind tunnel test shows that stall angle of attack of NWPU20 can reach 30°, which is higher than that of the general aircrafts, and the maximum lift-to-drag ratio of NWPU20 can nearly reach 6 at the angle of attack of 10°, which can satisfy design requirements of the NWPU20. A small-sized propulsion/torque testing system was developed to measure and analyze the propulsion and torque performances of the motor-propeller combination used in the NWPU20. A center of gravity (c.g.) testing apparatus was developed and used to adjust the c.g. of the NWPU20 so that it has good longitudinal static stability and control. The NWPU20 prototype has undergone successfully flight tests many times; it flies at 32 kilometers per hour, with an endurance of 15 minutes, and a maximum communications range of 300 meters. With the color video camera, NWPU20 successfully transmits real-time video back to the ground station. The success of NWPU20 proves preliminarily that 20-centimeter span micro air vehicle is feasible and usable.
