The ^(12)C+^(12)C fusion is one of the most important reactions in modern nuclear astrophysics.The trend and magnitude of the reaction rate within the Gamow window strongly influence various astrophysical processes.Ho...The ^(12)C+^(12)C fusion is one of the most important reactions in modern nuclear astrophysics.The trend and magnitude of the reaction rate within the Gamow window strongly influence various astrophysical processes.However,direct measurement of this reaction is extremely difficult,which makes it necessary to develop indirect methods.In this study,the ^(23)Na+p reaction system was used to study the compound nucleus ^(24)Mg.We employed a thick-target inverse kinematics method combined with theγ-charged-particle coincidence technique to measure the proton andα exit channels of ^(24)Mg.Technical details of the ^(23)Na+p thick-target inverse kinematics experiment and analysis are presented herein.展开更多
In order to obtain accurate probability integration method(PIM) parameters for surface movement of multi-panel mining, a genetic algorithm(GA) was used to optimize the parameters. As the measured surface movement is a...In order to obtain accurate probability integration method(PIM) parameters for surface movement of multi-panel mining, a genetic algorithm(GA) was used to optimize the parameters. As the measured surface movement is affected by more than one mining panel, traditional PIM parameter inversion model is difficult to ensure the reliability of the results due to the complexity of rock movement. With crossover,mutation and selection operators, GA can perform a global optimization search and has high computation efficiency. Compared with the pattern search algorithm, the fitness function can avoid falling into local minima traps. GA reduces the risk of local minima traps which improves the accuracy and reliability with the mutation mechanism. Application at Xuehu colliery shows that GA can be used to inverse the PIM parameters for multi-panel surface movement observation, and reliable results can be obtained. The research provides a new way for back-analysis of PIM parameters for mining subsidence under complex conditions.展开更多
Relaxation time spectra （RTS） derived from time domain induced polarization data （TDIP） are helpful to assess oil reservoir pore structures. However, due to the sensitivity to the signal-to-noise ratio （SNR）, th...Relaxation time spectra （RTS） derived from time domain induced polarization data （TDIP） are helpful to assess oil reservoir pore structures. However, due to the sensitivity to the signal-to-noise ratio （SNR）, the inversion accuracy of the traditional singular value decomposition （SVD） inversion method reduces with a decrease of SNR. In order to enhance the inversion accuracy and improve robustness of the inversion method to the SNR, an improved inversion method, based on damping factor and spectrum component residual correction, is proposed in this study. The numerical inversion results show that the oscillation of the RTS derived from the SVD method increased with a decrease of SNR, which makes it impossible to get accurate inversion components. However, the SNR has little influence on inversion components of the improved method, and the RTS has high inversion accuracy and robustness. Moreover, RTS derived from core sample data is basically in accord with the pore-size distribution curve, and the RTS derived from the actual induced polarization logging data is smooth and continuous, which indicates that the improved method is practicable.展开更多
There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.Howe...There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.展开更多
The structural properties, the enthalpies of formation, and the mechanical properties of some Ni-Al intermetallic compounds （NiAl, Ni3Al, NiAl3, Ni5Al3, Ni3Al4） are studied by using Chen＇s lattice inversion embedde...The structural properties, the enthalpies of formation, and the mechanical properties of some Ni-Al intermetallic compounds （NiAl, Ni3Al, NiAl3, Ni5Al3, Ni3Al4） are studied by using Chen＇s lattice inversion embedded-atom method （CLI-EAM）. Our calculated lattice parameters and cohesive energies of Ni-A1 compounds are consistent with the experimental and the other EAM results. The results of enthalpy of formation indicate a strong chemical interaction between Ni and Al in the intermetallic compounds. Through analyzing the alloy elastic constants, we find that all the Ni-Al intermetallic compounds discussed are mechanically stable. The bulk moduli of the compounds increase with the increasing Ni concentration. Our results also suggest that NiAl, Ni3Al, NiAl3, and Ni5Al3 are ductile materials with lower ratios of shear modulus to bulk modulus; while Ni3Al4 is brittle with a higher ratio.展开更多
The potential energy snrface of a CO2-N2 mixture is determined by using an inversion method, together with a new collision integral correlation [J. Phys. Chem. R@ Data 19 1179 （1990）]. With the new invert potential,...The potential energy snrface of a CO2-N2 mixture is determined by using an inversion method, together with a new collision integral correlation [J. Phys. Chem. R@ Data 19 1179 （1990）]. With the new invert potential, the transport properties of CO2-N2 mixture are presented in a temperature range front 273.15 K to 3273.15 K at low density by employing the Chapman-Enskog scheme and the Wang Chang-Uhlenbeck de Boer theory, consisting of a viscosity coefficient, a thermal conductivity coefficient, a binary diffusion coefficient, and a thermal diffusion factor. The accuracy of the predicted results is estimated to be 2% for viscosity, 5% for thermal conductivity, and 10% for binary diffusion coefficient.展开更多
A data-space inversion(DSI)method has been recently proposed and successfully applied to the history matching and production prediction of reservoirs.Based on Bayesian theory,DSI can directly and effectively obtain go...A data-space inversion(DSI)method has been recently proposed and successfully applied to the history matching and production prediction of reservoirs.Based on Bayesian theory,DSI can directly and effectively obtain good posterior flow predictions without inversion of geological parameters of reservoir model.This paper presents an improved DSI method to fast predict reservoir state fields(e.g.saturation and pressure profiles)via observed production data.Firstly,a large number of production curves and state data are generated by reservoir model simulation to expand the data space of original DSI.Then,efficient history matching only on the observed production data is carried out via the original DSI to obtain related parameters which reflects the weight of the real reservoir model relative to prior reservoir models.Finally,those parameters are used to predict the oil saturation and pressure profiles of the real reservoir model by combining large amounts of state data of prior reservoir models.Two examples including conventional heterogeneous and unconventional fractured reservoir are implemented to test the performances of predicting saturation and pressure profiles of this improved DSI method.Besides,this method is also tested in a real field and the obtained results show the high computational efficiency and high accuracy of the practical application of this method.展开更多
Elastic impedance inversion with high efficiency and high stability has become one of the main directions of seismic pre-stack inversion. The nonlinear elastic impedance inversion method based on a fast Markov chain M...Elastic impedance inversion with high efficiency and high stability has become one of the main directions of seismic pre-stack inversion. The nonlinear elastic impedance inversion method based on a fast Markov chain Monte Carlo （MCMC） method is proposed in this paper, combining conventional MCMC method based on global optimization with a preconditioned conjugate gradient （PCG） algorithm based on local optimization, so this method does not depend strongly on the initial model. It converges to the global optimum quickly and efficiently on the condition that effi- ciency and stability of inversion are both taken into consid- eration at the same time. The test data verify the feasibility and robustness of the method, and based on this method, we extract the effective pore-fluid bulk modulus, which is applied to reservoir fluid identification and detection, and consequently, a better result has been achieved.展开更多
Traditional geoacoustic inversions are generally solved by matched-field processing in combination with metaheuristic global searching algorithms which usually need massive computations. This paper proposes a new phys...Traditional geoacoustic inversions are generally solved by matched-field processing in combination with metaheuristic global searching algorithms which usually need massive computations. This paper proposes a new physical framework for geoacoustic retrievals. A parabolic approximation of wave equation with non-local boundary condition is used as the forward propagation model. The expressions of the corresponding tangent linear model and the adjoint operator are derived, respectively, by variational method. The analytical expressions for the gradient of the cost function with respect to the control variables can be formulated by the adjoint operator, which in turn can be used for optimization by the gradient-based method.展开更多
It is difficult to obtain the asymmetrical factor along the observation direction parallel to the plasma mid-plane when the detected radiation is also in the mid-plane. This paper considers the magnetic surfaces and G...It is difficult to obtain the asymmetrical factor along the observation direction parallel to the plasma mid-plane when the detected radiation is also in the mid-plane. This paper considers the magnetic surfaces and Grad-Shafranov shift, and develops a new method for inverse asymmetric electron density information, during magnetic equilibrium configuration in a tokamak.展开更多
An 8-channel HCN laser interferometer will be installed on HL-2A in near term. In order to get the spatial profile of the electron density Barr numerical method is adopted to realize the Abel inversion. In this articl...An 8-channel HCN laser interferometer will be installed on HL-2A in near term. In order to get the spatial profile of the electron density Barr numerical method is adopted to realize the Abel inversion. In this article the result of the Abel inversion by Matlab GUI is given which can be updated to process the measured data of the 8-channel laser interferometer and provide the spatial distribution of the electron density.展开更多
The lattice-inversion embedded-atom-method interatomic potential developed previously by us is extended to alkaline metals including Li,Na,and K.It is found that considering interatomic interactions between neighborin...The lattice-inversion embedded-atom-method interatomic potential developed previously by us is extended to alkaline metals including Li,Na,and K.It is found that considering interatomic interactions between neighboring atoms of an appropriate distance is a matter of great significance in constructing accurate embedded-atom-method interatomic potentials,especially for the prediction of surface energy.The lattice-inversion embedded-atom-method interatomic potentials for Li,Na,and K are successfully constructed by taking the fourth-neighbor atoms into consideration.These angular-independent potentials markedly promote the accuracy of predicted surface energies,which agree well with experimental results.In addition,the predicted structural stability,elastic constants,formation and migration energies of vacancy,and activation energy of vacancy diffusion are in good agreement with available experimental data and first-principles calculations,and the equilibrium condition is satisfied.展开更多
With the help of the modified geometrical factor theory, the Marquardt method was used to calculate the true electrical parameters of the formation from array induction logs. The inversion results derived from the ass...With the help of the modified geometrical factor theory, the Marquardt method was used to calculate the true electrical parameters of the formation from array induction logs. The inversion results derived from the assumed model and some practical cases show that the rebuilt formation profile determined by 2-ft resolution array induction logs is reasonable when the formation thickness is greater than 1 m, which thus indicates that the inversion method is reliable and can provide quantitative information for the discrimination of oil/gas or water zone.展开更多
We present systematic investigations on the physics,detection performance and inversion of logging-while-drilling extradeep azimuthal resistivity measurements(EDARM).First,the definitions of EDRAM measurements are dis...We present systematic investigations on the physics,detection performance and inversion of logging-while-drilling extradeep azimuthal resistivity measurements(EDARM).First,the definitions of EDRAM measurements are discussed,followed by the derivation of the attenuation and phase-shift geometrical factors to illustrate the relative contributions of formation units to the observed signals.Then,a new definition of detection depth,which considers the uncertainty of inversion results caused by the data noise,is proposed to quantify the detection capability of ED ARM.Finally,the B ayesian theory associated with Markov chain Monte Carlo sampling is introduced for fast processing of EDARM data.Numerical results show that ED ARM is capable of detecting the azimuth and distance of remote bed boundaries,and the detection capability increases with increasing spacing and resistivity contrast.The EDARM tool can accommodate a large range of formation resistivity and is able to provide the resistivity anisotropy at arbitrary relative dipping angles.In addition,multiple bed boundaries and reservoir images near the borehole are readily obtained by using the Bayesian inversion.展开更多
Nuclear Magnetic inversion is the basis of NMR Resonance （NMR） T2 logging interpretation. The regularization parameter selection of the penalty term directly influences the NMR T2 inversion result. We implemented b...Nuclear Magnetic inversion is the basis of NMR Resonance （NMR） T2 logging interpretation. The regularization parameter selection of the penalty term directly influences the NMR T2 inversion result. We implemented both norm smoothing and curvature smoothing methods for NMR T2 inversion, and compared the inversion results with respect to the optimal regular- ization parameters （（Xopt） which were selected by the dis- crepancy principle （DP）, generalized cross-validation （GCV）, S-curve, L-curve, and the slope of L-curve methods, respectively. The numerical results indicate that the DP method can lead to an oscillating or oversmoothed solution which is caused by an inaccurately estimated noise level. The （Xopt selected by the L-curve method is occa- sionally small or large which causes an undersmoothed or oversmoothed T2 distribution. The inversion results from GCV, S-curve and the slope of L-curve methods show satisfying inversion results. The slope of the L-curve method with less computation is more suitable for NMR T2 inversion. The inverted T2 distribution from norm smoothing is better than that from curvature smoothing when the noise level is high.展开更多
In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface contai...In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface containing the obstacle and corresponding to infinitely many incident point sources also placed on the measurement surface. The obstacle is allowed to be an impenetrable scatterer or a penetrable scatterer. We establish the validity of the factorization method with the nearfield data to characterize the obstacle in the planar waveguide by constructing an outgoing-to-incoming operator which is an integral operator defined on the measurement surface with the kernel given in terms of an infinite series.展开更多
In this paper,we proposed a novel method for low-field nuclear magnetic resonance(NMR)inversion based on low-rank and sparsity restraint(LRSR)of relaxation spectra,with which high quality construction is made possible...In this paper,we proposed a novel method for low-field nuclear magnetic resonance(NMR)inversion based on low-rank and sparsity restraint(LRSR)of relaxation spectra,with which high quality construction is made possible for one-and two-dimensional low-field and low signal to noise ratio NMR data.In this method,the low-rank and sparsity restraints are introduced into the objective function instead of the smoothing term.The low-rank features in relaxation spectra are extracted to ensure the local characteristics and morphology of spectra.The sparsity and residual term are contributed to the resolution and precision of spectra,with the elimination of the redundant relaxation components.Optimization process of the objective function is designed with alternating direction method of multiples,in which the objective function is decomposed into three subproblems to be independently solved.The optimum solution can be obtained by alternating iteration and updating process.At first,numerical simulations are conducted on synthetic echo data with different signal-to-noise ratios,to optimize the desirable regularization parameters and verify the feasibility and effectiveness of proposed method.Then,NMR experiments on solutions and artificial sandstone samples are conducted and analyzed,which validates the robustness and reliability of the proposed method.The results from simulations and experiments have demonstrated that the suggested method has unique advantages for improving the resolution of relaxation spectra and enhancing the ability of fluid quantitative identification.展开更多
The paper presents a new solution of inverse displacement analysis of the general six degree-of-freedom serial robot.The inverse displacement analysis of the general serial robot is transformed into a minimization pro...The paper presents a new solution of inverse displacement analysis of the general six degree-of-freedom serial robot.The inverse displacement analysis of the general serial robot is transformed into a minimization problem and then the optimization method is adopted to solve the nonlinear least squares problem with the analytic form of new Jacobian matrix.In this way,joint variables of the general serial robot can be searched out quickly under the desired precision when positions of the three non-collinear end effector points are given.Compared with the general Newton iterative method,the proposed algorithm can search out the solution when the robot is at the singular configuration and the initial configuration used in the optimization method may also be the singular configuration.So the convergence domain is bigger than that of the general Newton iterative method.Another advantage of the proposed algorithm is that positions of the three non-collinear end effector points are usually much easier to be measured than the orientation of the end effector.The inverse displacement analysis of the general 6R(six-revolute-joint) serial robot is illustrated as an example and the simulation results verify the efficiency of the proposed algorithm.Because the three non-collinear points can be selected at random,the method can be applied to any other types of serial robots.展开更多
Online reactivity monitoring plays an important role in operation and safety analyses of fission reactor systems. The inverse kinetics method, which is based on a point kinetics model, is the most widely used method f...Online reactivity monitoring plays an important role in operation and safety analyses of fission reactor systems. The inverse kinetics method, which is based on a point kinetics model, is the most widely used method for reactivity reconstruction of critical water reactors. However, this method is seldom applied to the reactivity reconstruction of subcritical reactors. In this study, an inverse kinetics method was employed for the reactivity reconstruction of a lead-based reactor under different initial reactivity states(ρ_0= 0,-2786,-5486,-8367, and-12,371 pcm). The results showed that the deviation in the reactivity of the lead-based subcritical reactor was greater when ρ_0 became smaller. The reactivity reconstructed using the inverse kinetics method was globally underestimated. At a given reactivity perturbation, the relative and absolute errors increased with the decrease in the initial reactivity. At a given initial reactivity, with the increase in the reactivity perturbation, the absolute error increased, whereas the relative error remained the same.This deviation is due to the variation in the external neutron source, spatial-spectral effects, and sub-diffusive effects, which require further study.展开更多
A Hauser-Ernst-type extended hyperbolic complex linear system given in our previous paper [Gao Y J 2004 Chin. Phys. 13 602] is slightly modified and used to develop a new inverse scattering method for the stationary a...A Hauser-Ernst-type extended hyperbolic complex linear system given in our previous paper [Gao Y J 2004 Chin. Phys. 13 602] is slightly modified and used to develop a new inverse scattering method for the stationary axisymmetric Einstein-Maxwell theory with multiple Abelian gauge fields. The reduction procedures in this inverse scattering method are found to be fairly simple, which makes the inverse scattering method be fine and effective in practical application. As an example, a concrete family of soliton solutions for the considered theory is obtained.展开更多
基金supported by the National Key Research and Development Project (No. 2022YFA1602301)the National Natural Science Foundation of China (Nos. U2267205, 12275361, 12125509, 12222514, 11961141003, and 12005304)+2 种基金the CAST Young Talent Support Planthe CNNC Science Fund for Talented Young Scholarsthe Continuous-Support Basic Scientific Research Project
文摘The ^(12)C+^(12)C fusion is one of the most important reactions in modern nuclear astrophysics.The trend and magnitude of the reaction rate within the Gamow window strongly influence various astrophysical processes.However,direct measurement of this reaction is extremely difficult,which makes it necessary to develop indirect methods.In this study,the ^(23)Na+p reaction system was used to study the compound nucleus ^(24)Mg.We employed a thick-target inverse kinematics method combined with theγ-charged-particle coincidence technique to measure the proton andα exit channels of ^(24)Mg.Technical details of the ^(23)Na+p thick-target inverse kinematics experiment and analysis are presented herein.
基金provided by the National Natural Science Foundation of China(No.51404272)the Hunan Province Key Laboratory of Coal Resources Clean-Utilization and Mine Environment Protection(No.E21224)
文摘In order to obtain accurate probability integration method(PIM) parameters for surface movement of multi-panel mining, a genetic algorithm(GA) was used to optimize the parameters. As the measured surface movement is affected by more than one mining panel, traditional PIM parameter inversion model is difficult to ensure the reliability of the results due to the complexity of rock movement. With crossover,mutation and selection operators, GA can perform a global optimization search and has high computation efficiency. Compared with the pattern search algorithm, the fitness function can avoid falling into local minima traps. GA reduces the risk of local minima traps which improves the accuracy and reliability with the mutation mechanism. Application at Xuehu colliery shows that GA can be used to inverse the PIM parameters for multi-panel surface movement observation, and reliable results can be obtained. The research provides a new way for back-analysis of PIM parameters for mining subsidence under complex conditions.
基金supported by a project from the Youth Science Foundation of the National Natural Science Foundation of China (11104089)
文摘Relaxation time spectra （RTS） derived from time domain induced polarization data （TDIP） are helpful to assess oil reservoir pore structures. However, due to the sensitivity to the signal-to-noise ratio （SNR）, the inversion accuracy of the traditional singular value decomposition （SVD） inversion method reduces with a decrease of SNR. In order to enhance the inversion accuracy and improve robustness of the inversion method to the SNR, an improved inversion method, based on damping factor and spectrum component residual correction, is proposed in this study. The numerical inversion results show that the oscillation of the RTS derived from the SVD method increased with a decrease of SNR, which makes it impossible to get accurate inversion components. However, the SNR has little influence on inversion components of the improved method, and the RTS has high inversion accuracy and robustness. Moreover, RTS derived from core sample data is basically in accord with the pore-size distribution curve, and the RTS derived from the actual induced polarization logging data is smooth and continuous, which indicates that the improved method is practicable.
基金The project was supported by the National Natural Science Foundation of China(Grant No.42204122).
文摘There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.
基金Project supported by the National Basic Research Program of China (Grant No. 2011CB606401)
文摘The structural properties, the enthalpies of formation, and the mechanical properties of some Ni-Al intermetallic compounds （NiAl, Ni3Al, NiAl3, Ni5Al3, Ni3Al4） are studied by using Chen＇s lattice inversion embedded-atom method （CLI-EAM）. Our calculated lattice parameters and cohesive energies of Ni-A1 compounds are consistent with the experimental and the other EAM results. The results of enthalpy of formation indicate a strong chemical interaction between Ni and Al in the intermetallic compounds. Through analyzing the alloy elastic constants, we find that all the Ni-Al intermetallic compounds discussed are mechanically stable. The bulk moduli of the compounds increase with the increasing Ni concentration. Our results also suggest that NiAl, Ni3Al, NiAl3, and Ni5Al3 are ductile materials with lower ratios of shear modulus to bulk modulus; while Ni3Al4 is brittle with a higher ratio.
基金supported by the National Natural Science Foundation of China (Grant No. 51006083)the China Postdoctoral Science Foundation (Grant No. 20110491658)the Fundamental Research Funds for the Central Universities
文摘The potential energy snrface of a CO2-N2 mixture is determined by using an inversion method, together with a new collision integral correlation [J. Phys. Chem. R@ Data 19 1179 （1990）]. With the new invert potential, the transport properties of CO2-N2 mixture are presented in a temperature range front 273.15 K to 3273.15 K at low density by employing the Chapman-Enskog scheme and the Wang Chang-Uhlenbeck de Boer theory, consisting of a viscosity coefficient, a thermal conductivity coefficient, a binary diffusion coefficient, and a thermal diffusion factor. The accuracy of the predicted results is estimated to be 2% for viscosity, 5% for thermal conductivity, and 10% for binary diffusion coefficient.
基金supported by Southern Marine Science and Engineering Guangdong Laboratory(Zhanjiang)(No.ZJW-2019-04)Cooperative Innovation Center of Unconventional Oil and Gas(Ministry of Education&Hubei Province),Yangtze University(No.UOG2020-17)the National Natural Science Foundation of China(No.51874044,51922007)。
文摘A data-space inversion(DSI)method has been recently proposed and successfully applied to the history matching and production prediction of reservoirs.Based on Bayesian theory,DSI can directly and effectively obtain good posterior flow predictions without inversion of geological parameters of reservoir model.This paper presents an improved DSI method to fast predict reservoir state fields(e.g.saturation and pressure profiles)via observed production data.Firstly,a large number of production curves and state data are generated by reservoir model simulation to expand the data space of original DSI.Then,efficient history matching only on the observed production data is carried out via the original DSI to obtain related parameters which reflects the weight of the real reservoir model relative to prior reservoir models.Finally,those parameters are used to predict the oil saturation and pressure profiles of the real reservoir model by combining large amounts of state data of prior reservoir models.Two examples including conventional heterogeneous and unconventional fractured reservoir are implemented to test the performances of predicting saturation and pressure profiles of this improved DSI method.Besides,this method is also tested in a real field and the obtained results show the high computational efficiency and high accuracy of the practical application of this method.
基金the sponsorship of the National Basic Research Program of China (973 Program,2013CB228604,2014CB239201)the National Oil and Gas Major Projects of China (2011ZX05014-001-010HZ,2011ZX05014-001-006-XY570) for their funding of this research
文摘Elastic impedance inversion with high efficiency and high stability has become one of the main directions of seismic pre-stack inversion. The nonlinear elastic impedance inversion method based on a fast Markov chain Monte Carlo （MCMC） method is proposed in this paper, combining conventional MCMC method based on global optimization with a preconditioned conjugate gradient （PCG） algorithm based on local optimization, so this method does not depend strongly on the initial model. It converges to the global optimum quickly and efficiently on the condition that effi- ciency and stability of inversion are both taken into consid- eration at the same time. The test data verify the feasibility and robustness of the method, and based on this method, we extract the effective pore-fluid bulk modulus, which is applied to reservoir fluid identification and detection, and consequently, a better result has been achieved.
基金Project supported by the Foundation of Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education,China(Grant No.SJTUMIES1908)the National Natural Science Foundation of China(Grant No.41775027)
文摘Traditional geoacoustic inversions are generally solved by matched-field processing in combination with metaheuristic global searching algorithms which usually need massive computations. This paper proposes a new physical framework for geoacoustic retrievals. A parabolic approximation of wave equation with non-local boundary condition is used as the forward propagation model. The expressions of the corresponding tangent linear model and the adjoint operator are derived, respectively, by variational method. The analytical expressions for the gradient of the cost function with respect to the control variables can be formulated by the adjoint operator, which in turn can be used for optimization by the gradient-based method.
文摘It is difficult to obtain the asymmetrical factor along the observation direction parallel to the plasma mid-plane when the detected radiation is also in the mid-plane. This paper considers the magnetic surfaces and Grad-Shafranov shift, and develops a new method for inverse asymmetric electron density information, during magnetic equilibrium configuration in a tokamak.
文摘An 8-channel HCN laser interferometer will be installed on HL-2A in near term. In order to get the spatial profile of the electron density Barr numerical method is adopted to realize the Abel inversion. In this article the result of the Abel inversion by Matlab GUI is given which can be updated to process the measured data of the 8-channel laser interferometer and provide the spatial distribution of the electron density.
基金Project supported by the National Basic Research Program of China (Grant No. 2011CB606401)
文摘The lattice-inversion embedded-atom-method interatomic potential developed previously by us is extended to alkaline metals including Li,Na,and K.It is found that considering interatomic interactions between neighboring atoms of an appropriate distance is a matter of great significance in constructing accurate embedded-atom-method interatomic potentials,especially for the prediction of surface energy.The lattice-inversion embedded-atom-method interatomic potentials for Li,Na,and K are successfully constructed by taking the fourth-neighbor atoms into consideration.These angular-independent potentials markedly promote the accuracy of predicted surface energies,which agree well with experimental results.In addition,the predicted structural stability,elastic constants,formation and migration energies of vacancy,and activation energy of vacancy diffusion are in good agreement with available experimental data and first-principles calculations,and the equilibrium condition is satisfied.
文摘With the help of the modified geometrical factor theory, the Marquardt method was used to calculate the true electrical parameters of the formation from array induction logs. The inversion results derived from the assumed model and some practical cases show that the rebuilt formation profile determined by 2-ft resolution array induction logs is reasonable when the formation thickness is greater than 1 m, which thus indicates that the inversion method is reliable and can provide quantitative information for the discrimination of oil/gas or water zone.
基金co-funded by Chinese Postdoctoral Science Foundation(2018M640663)the National Natural Science Foundation of China(41474100,41574118,41674131)National Science and Technology Major Project of the Ministry of Science and Technology of China(2017ZX05009-001)
文摘We present systematic investigations on the physics,detection performance and inversion of logging-while-drilling extradeep azimuthal resistivity measurements(EDARM).First,the definitions of EDRAM measurements are discussed,followed by the derivation of the attenuation and phase-shift geometrical factors to illustrate the relative contributions of formation units to the observed signals.Then,a new definition of detection depth,which considers the uncertainty of inversion results caused by the data noise,is proposed to quantify the detection capability of ED ARM.Finally,the B ayesian theory associated with Markov chain Monte Carlo sampling is introduced for fast processing of EDARM data.Numerical results show that ED ARM is capable of detecting the azimuth and distance of remote bed boundaries,and the detection capability increases with increasing spacing and resistivity contrast.The EDARM tool can accommodate a large range of formation resistivity and is able to provide the resistivity anisotropy at arbitrary relative dipping angles.In addition,multiple bed boundaries and reservoir images near the borehole are readily obtained by using the Bayesian inversion.
基金funded by Shell International Exploration and Production Inc.(PT45371)the National Natural Science Foundation of China-China National Petroleum Corporation Petrochemical Engineering United Fund(U1262114)the National Natural Science Foundation of China(41272163)
文摘Nuclear Magnetic inversion is the basis of NMR Resonance （NMR） T2 logging interpretation. The regularization parameter selection of the penalty term directly influences the NMR T2 inversion result. We implemented both norm smoothing and curvature smoothing methods for NMR T2 inversion, and compared the inversion results with respect to the optimal regular- ization parameters （（Xopt） which were selected by the dis- crepancy principle （DP）, generalized cross-validation （GCV）, S-curve, L-curve, and the slope of L-curve methods, respectively. The numerical results indicate that the DP method can lead to an oscillating or oversmoothed solution which is caused by an inaccurately estimated noise level. The （Xopt selected by the L-curve method is occa- sionally small or large which causes an undersmoothed or oversmoothed T2 distribution. The inversion results from GCV, S-curve and the slope of L-curve methods show satisfying inversion results. The slope of the L-curve method with less computation is more suitable for NMR T2 inversion. The inverted T2 distribution from norm smoothing is better than that from curvature smoothing when the noise level is high.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61421062 and 61520106004)the Microsoft Research Fund of Asia
文摘In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface containing the obstacle and corresponding to infinitely many incident point sources also placed on the measurement surface. The obstacle is allowed to be an impenetrable scatterer or a penetrable scatterer. We establish the validity of the factorization method with the nearfield data to characterize the obstacle in the planar waveguide by constructing an outgoing-to-incoming operator which is an integral operator defined on the measurement surface with the kernel given in terms of an infinite series.
基金supported by “National Natural Science Foundation of China (Grant No. 42204106)”“China Postdoctoral Science Foundation (Grant No. 2021M700172)”+1 种基金“The Strategic Cooperation Technology Projects of CNPC and CUP (Grant No. ZLZX2020-03)”“Natural Science Foundation of the Jiangsu Higher Education Institutions of China (Grant No. 20KJD430002)”
文摘In this paper,we proposed a novel method for low-field nuclear magnetic resonance(NMR)inversion based on low-rank and sparsity restraint(LRSR)of relaxation spectra,with which high quality construction is made possible for one-and two-dimensional low-field and low signal to noise ratio NMR data.In this method,the low-rank and sparsity restraints are introduced into the objective function instead of the smoothing term.The low-rank features in relaxation spectra are extracted to ensure the local characteristics and morphology of spectra.The sparsity and residual term are contributed to the resolution and precision of spectra,with the elimination of the redundant relaxation components.Optimization process of the objective function is designed with alternating direction method of multiples,in which the objective function is decomposed into three subproblems to be independently solved.The optimum solution can be obtained by alternating iteration and updating process.At first,numerical simulations are conducted on synthetic echo data with different signal-to-noise ratios,to optimize the desirable regularization parameters and verify the feasibility and effectiveness of proposed method.Then,NMR experiments on solutions and artificial sandstone samples are conducted and analyzed,which validates the robustness and reliability of the proposed method.The results from simulations and experiments have demonstrated that the suggested method has unique advantages for improving the resolution of relaxation spectra and enhancing the ability of fluid quantitative identification.
基金Funded by National Natural Science Foundation of China (No. 50905102)the Natural Science Foundation of Guangdong Province (Nos. 10151503101000033 and 8351503101000001)the Building Fund for the Academic Innovation Team of Shantou University (No. ITC10003)
文摘The paper presents a new solution of inverse displacement analysis of the general six degree-of-freedom serial robot.The inverse displacement analysis of the general serial robot is transformed into a minimization problem and then the optimization method is adopted to solve the nonlinear least squares problem with the analytic form of new Jacobian matrix.In this way,joint variables of the general serial robot can be searched out quickly under the desired precision when positions of the three non-collinear end effector points are given.Compared with the general Newton iterative method,the proposed algorithm can search out the solution when the robot is at the singular configuration and the initial configuration used in the optimization method may also be the singular configuration.So the convergence domain is bigger than that of the general Newton iterative method.Another advantage of the proposed algorithm is that positions of the three non-collinear end effector points are usually much easier to be measured than the orientation of the end effector.The inverse displacement analysis of the general 6R(six-revolute-joint) serial robot is illustrated as an example and the simulation results verify the efficiency of the proposed algorithm.Because the three non-collinear points can be selected at random,the method can be applied to any other types of serial robots.
基金supported by the Strategic Priority Science and Technology Program of the Chinese Academy of Sciences(No.XDA03040000)the National Natural Science Foundation of China(NSFC)(Nos.11305205,11305203,and 11405204)+3 种基金the Special Program for Informatization of the Chinese Academy of Sciences(No.XXH12504-1-09)the Anhui Provincial Special project for High Technology Industrythe Special Project of Youth Innovation Promotion Association of Chinese Academy of Sciencesthe Industrialization Fund
文摘Online reactivity monitoring plays an important role in operation and safety analyses of fission reactor systems. The inverse kinetics method, which is based on a point kinetics model, is the most widely used method for reactivity reconstruction of critical water reactors. However, this method is seldom applied to the reactivity reconstruction of subcritical reactors. In this study, an inverse kinetics method was employed for the reactivity reconstruction of a lead-based reactor under different initial reactivity states(ρ_0= 0,-2786,-5486,-8367, and-12,371 pcm). The results showed that the deviation in the reactivity of the lead-based subcritical reactor was greater when ρ_0 became smaller. The reactivity reconstructed using the inverse kinetics method was globally underestimated. At a given reactivity perturbation, the relative and absolute errors increased with the decrease in the initial reactivity. At a given initial reactivity, with the increase in the reactivity perturbation, the absolute error increased, whereas the relative error remained the same.This deviation is due to the variation in the external neutron source, spatial-spectral effects, and sub-diffusive effects, which require further study.
基金Project supported by the National Natural Science Foundation of China (Grant No 10475036)
文摘A Hauser-Ernst-type extended hyperbolic complex linear system given in our previous paper [Gao Y J 2004 Chin. Phys. 13 602] is slightly modified and used to develop a new inverse scattering method for the stationary axisymmetric Einstein-Maxwell theory with multiple Abelian gauge fields. The reduction procedures in this inverse scattering method are found to be fairly simple, which makes the inverse scattering method be fine and effective in practical application. As an example, a concrete family of soliton solutions for the considered theory is obtained.
