Projective synchronization problems of a drive system and a particular response network were investigated,where the drive system is an arbitrary system with n+1 dimensions;it may be a linear or nonlinear system,and ev...Projective synchronization problems of a drive system and a particular response network were investigated,where the drive system is an arbitrary system with n+1 dimensions;it may be a linear or nonlinear system,and even a chaotic or hyperchaotic system,the response network is complex system coupled by N nodes,and every node is showed by the approximately linear part of the drive system.Only controlling any one node of the response network by designed controller can achieve the projective synchronization.Some numerical examples were employed to verify the effectiveness and correctness of the designed controller.展开更多
The nature of adhoc networks makes them vulnerable to security attacks. Many security technologies such as intrusion prevention and intrusion detection are passive in response to intrusions in that their countermea- s...The nature of adhoc networks makes them vulnerable to security attacks. Many security technologies such as intrusion prevention and intrusion detection are passive in response to intrusions in that their countermea- sures are only to protect the networks, and there is no automated network-wide counteraction against detected intrusions, the architecture of cooperation intrusion response based multi-agent is propose. The architecture is composed of mobile agents. Monitor agent resides on every node and monitors its neighbor nodes. Decision agent collects information from monitor nodes and detects an intrusion by security policies. When an intruder is found in the architecture, the block agents will get to the neighbor nodes of the intruder and form the mobile firewall to isolate the intruder. In the end, we evaluate it by simulation.展开更多
Throught fusion of the mechanism modeling and the neural networks modeling,a compo- nent content soft-sensor,which is composed of the equilibrium calculation model for multi-component rare earth extraction and the err...Throught fusion of the mechanism modeling and the neural networks modeling,a compo- nent content soft-sensor,which is composed of the equilibrium calculation model for multi-component rare earth extraction and the error compensation model of fuzzy system,is proposed to solve the prob- lem that the component content in countercurrent rare-earth extraction process is hardly measured on-line.An industry experiment in the extraction Y process by HAB using this hybrid soft-sensor proves its effectiveness.展开更多
Passive Optical Networks(PONs)are considered as the preferred solution for broadband fibre-based access networks.This is because PONs present low cost deployment,low energy consumption and also meet high bandwidth dem...Passive Optical Networks(PONs)are considered as the preferred solution for broadband fibre-based access networks.This is because PONs present low cost deployment,low energy consumption and also meet high bandwidth demands from end users.In addition,end users expect a high availability for access networks,while operators are more concerned about reducing the failure impact(number of clients affected by failures).Moreover,operators are also interested in reducing the cost of the access network.This paper provides a deep insight into the consequences that the physical topology and design decisions cause on the availability,the failure impact and the cost of a PON.In order to do that,the physical layout of the PON deployment area is approximated by a network geometric model.A PON deployed according to the geometric model is then assessed in terms of failure impact,availability and cost.This way,the effects of different design decisions and the physical layout on these three parameters are evaluated.In addition,the tradeoffs between availability,failure impact and cost caused by planning decisions and the physical topology are identified and pinpointed.展开更多
A new sufficient conditions for the global exponential stability of the equilibrium point for delayed cellular neural networks （DCNNs） is presented. It is shown that the use of a more general type of Lyapunov-Krasov...A new sufficient conditions for the global exponential stability of the equilibrium point for delayed cellular neural networks （DCNNs） is presented. It is shown that the use of a more general type of Lyapunov-Krasovskii function enables the derivation of new results for an exponential stability of the equilibrium point for DCNNs. The results establish a relation between the delay time and the parameters of the network. The results are also compared with one of the most recent results derived in the literature.展开更多
A combined model based on principal components analysis (PCA) and generalized regression neural network (GRNN) was adopted to forecast electricity price in day-ahead electricity market. PCA was applied to mine the mai...A combined model based on principal components analysis (PCA) and generalized regression neural network (GRNN) was adopted to forecast electricity price in day-ahead electricity market. PCA was applied to mine the main influence on day-ahead price, avoiding the strong correlation between the input factors that might influence electricity price, such as the load of the forecasting hour, other history loads and prices, weather and temperature; then GRNN was employed to forecast electricity price according to the main information extracted by PCA. To prove the efficiency of the combined model, a case from PJM (Pennsylvania-New Jersey-Maryland) day-ahead electricity market was evaluated. Compared to back-propagation (BP) neural network and standard GRNN, the combined method reduces the mean absolute percentage error about 3%.展开更多
In the non-linear microwave drying process, the incremental improved back-propagation （BP） neural network and response surface methodology （RSM） were used to build a predictive model of the combined effects of ind...In the non-linear microwave drying process, the incremental improved back-propagation （BP） neural network and response surface methodology （RSM） were used to build a predictive model of the combined effects of independent variables （the microwave power, the acting time and the rotational frequency） for microwave drying of selenium-rich slag. The optimum operating conditions obtained from the quadratic form of the RSM are： the microwave power of 14.97 kW, the acting time of 89.58 min, the rotational frequency of 10.94 Hz, and the temperature of 136.407 ℃. The relative dehydration rate of 97.1895% is obtained. Under the optimum operating conditions, the incremental improved BP neural network prediction model can predict the drying process results and different effects on the results of the independent variables. The verification experiments demonstrate the prediction accuracy of the network, and the mean squared error is 0.16. The optimized results indicate that RSM can optimize the experimental conditions within much more broad range by considering the combination of factors and the neural network model can predict the results effectively and provide the theoretical guidance for the follow-up production process.展开更多
Some sufficient conditions for the global exponential stability and lower bounds on the rate of exponential convergence of the cellular neural networks with delay (DCNNs) are obtained by means of a method based on del...Some sufficient conditions for the global exponential stability and lower bounds on the rate of exponential convergence of the cellular neural networks with delay (DCNNs) are obtained by means of a method based on delay differential inequality. The method, which does not make use of any Lyapunov functional, is simple and valid for the stability analysis of neural networks with delay. Some previously established results in this paper are shown to be special casses of the presented result.展开更多
It is important to understand how ballistic materials respond to impact from projectiles such that informed decisions can be made in the design process of protective armour systems. Ballistic testing is a standards-ba...It is important to understand how ballistic materials respond to impact from projectiles such that informed decisions can be made in the design process of protective armour systems. Ballistic testing is a standards-based process where materials are tested to determine whether they meet protection, safety and performance criteria. For the V50ballistic test, projectiles are fired at different velocities to determine a key design parameter known as the ballistic limit velocity(BLV), the velocity above which projectiles perforate the target. These tests, however, are destructive by nature and as such there can be considerable associated costs, especially when studying complex armour materials and systems. This study proposes a unique solution to the problem using a recent class of machine learning system known as the Generative Adversarial Network(GAN). The GAN can be used to generate new ballistic samples as opposed to performing additional destructive experiments. A GAN network architecture is tested and trained on three different ballistic data sets, and their performance is compared. The trained networks were able to successfully produce ballistic curves with an overall RMSE of between 10 and 20 % and predicted the V50BLV in each case with an error of less than 5 %. The results demonstrate that it is possible to train generative networks on a limited number of ballistic samples and use the trained network to generate many new samples representative of the data that it was trained on. The paper spotlights the benefits that generative networks can bring to ballistic applications and provides an alternative to expensive testing during the early stages of the design process.展开更多
To deeply exploit the mechanisms of ant colony optimization （ACO） applied to develop routing in mobile ad hoe networks （MANETS）,some existing representative ant colony routing protocols were analyzed and compared....To deeply exploit the mechanisms of ant colony optimization （ACO） applied to develop routing in mobile ad hoe networks （MANETS）,some existing representative ant colony routing protocols were analyzed and compared.The analysis results show that every routing protocol has its own characteristics and competitive environment.No routing protocol is better than others in all aspects.Therefore,based on no free lunch theory,ant routing protocols were decomposed into three key components：route discovery,route maintenance （including route refreshing and route failure handling） and data forwarding.Moreover,component based ant routing protocol （CBAR） was proposed.For purpose of analysis,it only maintained basic ant routing process,and it was simple and efficient with a low overhead.Subsequently,different mechanisms used in every component and their effect on performance were analyzed and tested by simulations.Finally,future research strategies and trends were also summarized.展开更多
A new combinational technology is proposed,which is feasible to apply physical-layer network coding（PNC） to wireless fading channels by employing the harmful interference strategically.The key step of PNC is that so...A new combinational technology is proposed,which is feasible to apply physical-layer network coding（PNC） to wireless fading channels by employing the harmful interference strategically.The key step of PNC is that sources broadcast signals simultaneously without orthogonal scheduling.Naturally,the signals overlap in the free space at the receivers.Since the signals from different sources are mutual independent,rooted on this rational assumption,an enhanced joint diagonalization separation named altering row diagonalization（ARD） algorithm is exploited to separate these signals by maximizing the cost function measuring independence among them.This ARD PNC（APNC） methodology provides an innovative way to implement signal-level network coding at the presence of interference and without any priori information about channels in fading environments.In conclusions,the proposed APNC performs well with higher bandwidth utility and lower error rate.展开更多
A new chance of developing traditional manufacturing industry comes forth with the development of network technology. Application technology oriented rapid response manufacturing in the distributed network environment...A new chance of developing traditional manufacturing industry comes forth with the development of network technology. Application technology oriented rapid response manufacturing in the distributed network environments, that is, how to take advantage of the Intranet and Internet, combine the numerous manufacturing resources spread around the region, the country and even the globe is the key to the agile design, manufacturing and the buildup of comprehensively competitive power, at the same time, is also an important research direction in the field of advanced manufacturing technology. Rapid response manufacturing in the distributed network environment is a newly manufactory pattern that can be used to implement the conception of agile design and manufacturing, but there are some new problems coming with it, which will directly influence the enterprise’s ability of rapid response in the distributed network manufacturing pattern and lead to the failure of the league and the lost of the given orders. In this paper, we establish some approaches to solve these problems in product development process. The paper then presents the research on key application technologies and solutions includes: network safety strategy which guarantees data transferring among the leaguer members, production data management based on Web/DOT (Distributed Object Technology) and XML criteria which guarantees data exchange in structure-variance characteristic environments, the network platform which provides the conversion service of different types of CAD files each other. All of these solutions are aim for technology problems existing in the distributed network environments and among the league members. Finally, the paper takes one project, that is, the establishment of the online application service system for Shanghai Advance Manufacturing Technology Research Center as a good instance.展开更多
Based on the definition of component ontology, an effective component classification mechanism and a facet named component relationship are proposed. Then an application domain oriented, hierarchical component organiz...Based on the definition of component ontology, an effective component classification mechanism and a facet named component relationship are proposed. Then an application domain oriented, hierarchical component organization model is established. At last a hierarchical component semantic network (HCSN) described by ontology interchange language(OIL) is presented and then its function is described. Using HCSN and cooperating with other components retrieving algorithms based on component description, other components information and their assembly or composite modes related to the key component can be found. Based on HCSN, component directory library is catalogued and a prototype system is constructed. The prototype system proves that component library organization based on this model gives guarantee to the reliability of component assembly during program mining.展开更多
OBJECTIVE To clarify the mecha⁃nism of Tou Tong Ning capsule(TTNC)and elu⁃cidate crosstalk between multi-components drug and trigeminal ganglia cells in migraine.METH⁃ODS We integrated single-cell RNA sequencing data ...OBJECTIVE To clarify the mecha⁃nism of Tou Tong Ning capsule(TTNC)and elu⁃cidate crosstalk between multi-components drug and trigeminal ganglia cells in migraine.METH⁃ODS We integrated single-cell RNA sequencing data and a quantitative evaluation algorithm of the disturbance of multi-target drugs on the dis⁃ease network to explore the specific pathology of TTNC for migraine.Cerebrovascular smooth muscle spasmolytic activity experiment was car⁃ried out to verify the results of bioinformatics analysis.RESULTS TTNC can effectively regu⁃late the functions of synaptic signaling,inflamma⁃tion and immune response,and cerebrovascular smooth muscle.For different cell subtypes of tri⁃geminal ganglia,TTNC can significantly disturb the robustness on neuronal cell networks and non-neural networks(fibroblast and vascular cells),indicating TTNC vasodilation activity of brain vessels and neural regulation activities of various neuro types.Contraction of cerebrovas⁃cular smooth muscle of mouse ex vivo confirmed the vasodilation activity of TTNC and active com⁃pounds(Emodin,Luteolin and Levistilide A).And literature mining confirmed the vasospasmolytic activity and neuroprotective effect activity of TTNC.CONCLUSIONS Integrating single-cell data and network disturbance tools provides a new strategy for the MoA of multi-components drug through cell subtyping.展开更多
Four optimal approaches of high-order finite-impulse response(FIR) digital filters were developed for designing four types filters using neural network algorithms. The solutions were presented as parallel algorithms t...Four optimal approaches of high-order finite-impulse response(FIR) digital filters were developed for designing four types filters using neural network algorithms. The solutions were presented as parallel algorithms to approximate the desired frequency response specification. Therefore, these methods avoid matrix inversion, and make a fast calculation of the filter’s coefficients possible. The convergence theorems of these proposed algorithms were presented and proved to illustrate them stable, and the implementation of these methods was described together with some design guidelines. The simulation results show that the ripples of the designed FIR filters are significantly little in the pass-band and stop-band, and the proposed algorithms are of fast convergence.展开更多
基金Supported by the National Natural Science Foundation of China (11161027)。
文摘Projective synchronization problems of a drive system and a particular response network were investigated,where the drive system is an arbitrary system with n+1 dimensions;it may be a linear or nonlinear system,and even a chaotic or hyperchaotic system,the response network is complex system coupled by N nodes,and every node is showed by the approximately linear part of the drive system.Only controlling any one node of the response network by designed controller can achieve the projective synchronization.Some numerical examples were employed to verify the effectiveness and correctness of the designed controller.
基金This project was supported by the National Natural Science Foundation of China (60672068)the National High Technology Development 863 Program of China (2006AA01Z436, 2007AA01Z452.)
文摘The nature of adhoc networks makes them vulnerable to security attacks. Many security technologies such as intrusion prevention and intrusion detection are passive in response to intrusions in that their countermea- sures are only to protect the networks, and there is no automated network-wide counteraction against detected intrusions, the architecture of cooperation intrusion response based multi-agent is propose. The architecture is composed of mobile agents. Monitor agent resides on every node and monitors its neighbor nodes. Decision agent collects information from monitor nodes and detects an intrusion by security policies. When an intruder is found in the architecture, the block agents will get to the neighbor nodes of the intruder and form the mobile firewall to isolate the intruder. In the end, we evaluate it by simulation.
基金Supported by National Natural Science Foundation of P.R.China(50474020,60534010,60504006)
文摘Throught fusion of the mechanism modeling and the neural networks modeling,a compo- nent content soft-sensor,which is composed of the equilibrium calculation model for multi-component rare earth extraction and the error compensation model of fuzzy system,is proposed to solve the prob- lem that the component content in countercurrent rare-earth extraction process is hardly measured on-line.An industry experiment in the extraction Y process by HAB using this hybrid soft-sensor proves its effectiveness.
基金Norwegian University of Science and Technology(Project 43255)
文摘Passive Optical Networks(PONs)are considered as the preferred solution for broadband fibre-based access networks.This is because PONs present low cost deployment,low energy consumption and also meet high bandwidth demands from end users.In addition,end users expect a high availability for access networks,while operators are more concerned about reducing the failure impact(number of clients affected by failures).Moreover,operators are also interested in reducing the cost of the access network.This paper provides a deep insight into the consequences that the physical topology and design decisions cause on the availability,the failure impact and the cost of a PON.In order to do that,the physical layout of the PON deployment area is approximated by a network geometric model.A PON deployed according to the geometric model is then assessed in terms of failure impact,availability and cost.This way,the effects of different design decisions and the physical layout on these three parameters are evaluated.In addition,the tradeoffs between availability,failure impact and cost caused by planning decisions and the physical topology are identified and pinpointed.
基金This project was supported in part by the National Natural Science Foundation of China (60404022, 60604004)the Key Scientific Research project of Education Ministry of China (204014)the National Natural Science Foundation of China for Distinguished Young Scholars (60525303).
文摘A new sufficient conditions for the global exponential stability of the equilibrium point for delayed cellular neural networks （DCNNs） is presented. It is shown that the use of a more general type of Lyapunov-Krasovskii function enables the derivation of new results for an exponential stability of the equilibrium point for DCNNs. The results establish a relation between the delay time and the parameters of the network. The results are also compared with one of the most recent results derived in the literature.
基金Project(70671039) supported by the National Natural Science Foundation of China
文摘A combined model based on principal components analysis (PCA) and generalized regression neural network (GRNN) was adopted to forecast electricity price in day-ahead electricity market. PCA was applied to mine the main influence on day-ahead price, avoiding the strong correlation between the input factors that might influence electricity price, such as the load of the forecasting hour, other history loads and prices, weather and temperature; then GRNN was employed to forecast electricity price according to the main information extracted by PCA. To prove the efficiency of the combined model, a case from PJM (Pennsylvania-New Jersey-Maryland) day-ahead electricity market was evaluated. Compared to back-propagation (BP) neural network and standard GRNN, the combined method reduces the mean absolute percentage error about 3%.
基金Project(50734007) supported by the National Natural Science Foundation of China
文摘In the non-linear microwave drying process, the incremental improved back-propagation （BP） neural network and response surface methodology （RSM） were used to build a predictive model of the combined effects of independent variables （the microwave power, the acting time and the rotational frequency） for microwave drying of selenium-rich slag. The optimum operating conditions obtained from the quadratic form of the RSM are： the microwave power of 14.97 kW, the acting time of 89.58 min, the rotational frequency of 10.94 Hz, and the temperature of 136.407 ℃. The relative dehydration rate of 97.1895% is obtained. Under the optimum operating conditions, the incremental improved BP neural network prediction model can predict the drying process results and different effects on the results of the independent variables. The verification experiments demonstrate the prediction accuracy of the network, and the mean squared error is 0.16. The optimized results indicate that RSM can optimize the experimental conditions within much more broad range by considering the combination of factors and the neural network model can predict the results effectively and provide the theoretical guidance for the follow-up production process.
文摘Some sufficient conditions for the global exponential stability and lower bounds on the rate of exponential convergence of the cellular neural networks with delay (DCNNs) are obtained by means of a method based on delay differential inequality. The method, which does not make use of any Lyapunov functional, is simple and valid for the stability analysis of neural networks with delay. Some previously established results in this paper are shown to be special casses of the presented result.
基金supported by the Engineering and Physical Sciences Research Council [grant number: EP/N509644/1]。
文摘It is important to understand how ballistic materials respond to impact from projectiles such that informed decisions can be made in the design process of protective armour systems. Ballistic testing is a standards-based process where materials are tested to determine whether they meet protection, safety and performance criteria. For the V50ballistic test, projectiles are fired at different velocities to determine a key design parameter known as the ballistic limit velocity(BLV), the velocity above which projectiles perforate the target. These tests, however, are destructive by nature and as such there can be considerable associated costs, especially when studying complex armour materials and systems. This study proposes a unique solution to the problem using a recent class of machine learning system known as the Generative Adversarial Network(GAN). The GAN can be used to generate new ballistic samples as opposed to performing additional destructive experiments. A GAN network architecture is tested and trained on three different ballistic data sets, and their performance is compared. The trained networks were able to successfully produce ballistic curves with an overall RMSE of between 10 and 20 % and predicted the V50BLV in each case with an error of less than 5 %. The results demonstrate that it is possible to train generative networks on a limited number of ballistic samples and use the trained network to generate many new samples representative of the data that it was trained on. The paper spotlights the benefits that generative networks can bring to ballistic applications and provides an alternative to expensive testing during the early stages of the design process.
基金Project(61225012)supported by the National Science Foundation for Distinguished Young Scholars of ChinaProjects(61070162,71071028,70931001)supported by the National Natural Science Foundation of China+4 种基金Project(20120042130003)supported by the Specialized Research Fund of the Doctoral Program of Higher Education for the Priority Development Areas,ChinaProjects(20100042110025,20110042110024)supported by the Specialized Research Fund for the Doctoral Program of Higher Education,ChinaProject(2012)supported by the Specialized Development Fund for the Internet of Things from the Ministry of Industry and Information Technology of ChinaProject(N110204003)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(L2013001)supported by the Scientific Research Fund of Liaoning Provincial Education Department,China
文摘To deeply exploit the mechanisms of ant colony optimization （ACO） applied to develop routing in mobile ad hoe networks （MANETS）,some existing representative ant colony routing protocols were analyzed and compared.The analysis results show that every routing protocol has its own characteristics and competitive environment.No routing protocol is better than others in all aspects.Therefore,based on no free lunch theory,ant routing protocols were decomposed into three key components：route discovery,route maintenance （including route refreshing and route failure handling） and data forwarding.Moreover,component based ant routing protocol （CBAR） was proposed.For purpose of analysis,it only maintained basic ant routing process,and it was simple and efficient with a low overhead.Subsequently,different mechanisms used in every component and their effect on performance were analyzed and tested by simulations.Finally,future research strategies and trends were also summarized.
基金supported by the National Natural Science Foundation of China(6120118361132002)
文摘A new combinational technology is proposed,which is feasible to apply physical-layer network coding（PNC） to wireless fading channels by employing the harmful interference strategically.The key step of PNC is that sources broadcast signals simultaneously without orthogonal scheduling.Naturally,the signals overlap in the free space at the receivers.Since the signals from different sources are mutual independent,rooted on this rational assumption,an enhanced joint diagonalization separation named altering row diagonalization（ARD） algorithm is exploited to separate these signals by maximizing the cost function measuring independence among them.This ARD PNC（APNC） methodology provides an innovative way to implement signal-level network coding at the presence of interference and without any priori information about channels in fading environments.In conclusions,the proposed APNC performs well with higher bandwidth utility and lower error rate.
文摘A new chance of developing traditional manufacturing industry comes forth with the development of network technology. Application technology oriented rapid response manufacturing in the distributed network environments, that is, how to take advantage of the Intranet and Internet, combine the numerous manufacturing resources spread around the region, the country and even the globe is the key to the agile design, manufacturing and the buildup of comprehensively competitive power, at the same time, is also an important research direction in the field of advanced manufacturing technology. Rapid response manufacturing in the distributed network environment is a newly manufactory pattern that can be used to implement the conception of agile design and manufacturing, but there are some new problems coming with it, which will directly influence the enterprise’s ability of rapid response in the distributed network manufacturing pattern and lead to the failure of the league and the lost of the given orders. In this paper, we establish some approaches to solve these problems in product development process. The paper then presents the research on key application technologies and solutions includes: network safety strategy which guarantees data transferring among the leaguer members, production data management based on Web/DOT (Distributed Object Technology) and XML criteria which guarantees data exchange in structure-variance characteristic environments, the network platform which provides the conversion service of different types of CAD files each other. All of these solutions are aim for technology problems existing in the distributed network environments and among the league members. Finally, the paper takes one project, that is, the establishment of the online application service system for Shanghai Advance Manufacturing Technology Research Center as a good instance.
文摘Based on the definition of component ontology, an effective component classification mechanism and a facet named component relationship are proposed. Then an application domain oriented, hierarchical component organization model is established. At last a hierarchical component semantic network (HCSN) described by ontology interchange language(OIL) is presented and then its function is described. Using HCSN and cooperating with other components retrieving algorithms based on component description, other components information and their assembly or composite modes related to the key component can be found. Based on HCSN, component directory library is catalogued and a prototype system is constructed. The prototype system proves that component library organization based on this model gives guarantee to the reliability of component assembly during program mining.
基金CACMS Innovation Fund(CI2021A05041)the Fundamental Research Funds for the Central Public Welfare Research Institutes(ZZ13-YQ-048,ZXKT21008)。
文摘OBJECTIVE To clarify the mecha⁃nism of Tou Tong Ning capsule(TTNC)and elu⁃cidate crosstalk between multi-components drug and trigeminal ganglia cells in migraine.METH⁃ODS We integrated single-cell RNA sequencing data and a quantitative evaluation algorithm of the disturbance of multi-target drugs on the dis⁃ease network to explore the specific pathology of TTNC for migraine.Cerebrovascular smooth muscle spasmolytic activity experiment was car⁃ried out to verify the results of bioinformatics analysis.RESULTS TTNC can effectively regu⁃late the functions of synaptic signaling,inflamma⁃tion and immune response,and cerebrovascular smooth muscle.For different cell subtypes of tri⁃geminal ganglia,TTNC can significantly disturb the robustness on neuronal cell networks and non-neural networks(fibroblast and vascular cells),indicating TTNC vasodilation activity of brain vessels and neural regulation activities of various neuro types.Contraction of cerebrovas⁃cular smooth muscle of mouse ex vivo confirmed the vasodilation activity of TTNC and active com⁃pounds(Emodin,Luteolin and Levistilide A).And literature mining confirmed the vasospasmolytic activity and neuroprotective effect activity of TTNC.CONCLUSIONS Integrating single-cell data and network disturbance tools provides a new strategy for the MoA of multi-components drug through cell subtyping.
基金Project (50677014) supported by the National Natural Science Foundation of China project (20060532002) supported by the Doctoral Special Fund of Ministry of Education, China+1 种基金project (NCET-04-0767) supported by the Program for New Century Excellent Talents in Universityprojects(06JJ2024, 03GKY3115, 04FJ2003, and 05GK2005) supported by the Foundation of Hunan Provincial Science and Technology
文摘Four optimal approaches of high-order finite-impulse response(FIR) digital filters were developed for designing four types filters using neural network algorithms. The solutions were presented as parallel algorithms to approximate the desired frequency response specification. Therefore, these methods avoid matrix inversion, and make a fast calculation of the filter’s coefficients possible. The convergence theorems of these proposed algorithms were presented and proved to illustrate them stable, and the implementation of these methods was described together with some design guidelines. The simulation results show that the ripples of the designed FIR filters are significantly little in the pass-band and stop-band, and the proposed algorithms are of fast convergence.
