In order to investigate the effect of additives and nano-particle on the surface tensions of lithium bromide(Li Br) aqueous solution/ammonia, many experiments were carried out based on Wilhelmy plate method. Firstly, ...In order to investigate the effect of additives and nano-particle on the surface tensions of lithium bromide(Li Br) aqueous solution/ammonia, many experiments were carried out based on Wilhelmy plate method. Firstly, the surface tension of Li Br aqueous solution with 1-octanol was measured and then the comparison between the measured results and previous experimental results was given to verify the measuring accuracy. Some new additives, such as cationic surfactants cetyltrimethyl ammonium chloride(CTAC), and cetyltrimethyl ammonium bromide(CTAB) were chosen in the experiments. The experimental results show that CTAC and CTAB can obviously reduce the surface tension of Li Br aqueous solution/ammonia. In addition, it is found that nano-particles cannot remarkably decrease the surface tension of Li Br aqueous solution/ammonia. However, the mixed addition of additives and nano-particles can remarkably affect the surface tension of Li Br aqueous solution/ammonia. That is to say, additives play more important role in reducing the surface tension of Li Br aqueous solution/ammonia. But nano-particles may enhance the heat transfer in the absorption refrigeration process.展开更多
Ni-W-P composite coatings reinforced by Ce O2 and Si O2 nano-particles on the surface of common carbon steels, were prepared by double pulse electrodeposition. The crystallization course was characterized by phase str...Ni-W-P composite coatings reinforced by Ce O2 and Si O2 nano-particles on the surface of common carbon steels, were prepared by double pulse electrodeposition. The crystallization course was characterized by phase structures, crystallinity, grain sizes and microstructures. The results indicate that as-deposited composite coating is amorphous. Whereas it turns into the crystalline structure with 98.25% crystallinity, and Ni3 P, Ni2 P and Ni5P2 alloy phases precipitate from structures at 400 °C. Thereafter, Ni2 P and Ni5P2 metastable alloy phases turn into Ni3 P stable alloy phase at 500 °C. The crystallization course of the composite coating has finished when being heat-treated at 700 °C. The average sizes of Ni grains increase with the rise of heat treatment temperature from400 °C to 700 °C. Ce O2 and Si O2 nano-particles deposited into Ni-W-P alloys can delay the crystallization course and habit the growth of alloy phases.展开更多
Rutile phase exhibits higher refractive index and h id ing power, good chemical stability, and is becoming a candidate material for the high-temperature separation and catalysis applications. The thermodynamically sta...Rutile phase exhibits higher refractive index and h id ing power, good chemical stability, and is becoming a candidate material for the high-temperature separation and catalysis applications. The thermodynamically stable feature of rutile among the three polymorphs of TiO 2 usually hinders ob taining nano-sized rutile phase by a conventional calcining way. However, acid peptization of amorphous TiO 2 is favorable to the formation of rutile phase. I n this work, well-crystallized and well-dispersed rod-like rutile particles w ith specific surface areas of 49.1 and 35.0 m 2/g were prepared by hydrothermal ly treating the acid peptized TiO 2 amorphous sols at relatively low temperatur es of 200 ℃ or 240 ℃, respectively. The formation of non-touching rutile part icles is attributed to high long-range electrostatic forces between particles i n the presence of the high concentration of the peptizer. The acid peptization w ould easily break the ≡Ti-O-Ti≡ bonds to form ≡Ti-OH or HO-Ti-OH species depending on the amount of acid, and create conditions for the formation of rut ile nuclei after structural rearrangements.展开更多
Due to the biological risks of using the conventional lubricants,the vegetable oils have been considered nowadays.Besides,to improve the tribological properties of the vegetable oils in various applications like metal...Due to the biological risks of using the conventional lubricants,the vegetable oils have been considered nowadays.Besides,to improve the tribological properties of the vegetable oils in various applications like metal forming processes,nanoparticles have been used as additives.This research evaluated the lubrication performance of the Al2O3 and TiO2 nanoparticles dispersed in rapeseed oil during the parallel tubular channel angular pressing (PTCAP) process.The experimental PTCAP tests have been fulfilled under three lubrication conditions and the comparison between the PTCAP processed tubes has been performed in terms of the maximum forming force,surface roughness,and microhardness.The experimental results indicate that adding the mentioned nanoparticles has caused at least a 50% reduction in the maximum deformation load.Moreover,a remarkable decrement in the surface roughness of the formed tubes has been obtained.展开更多
Herein,this article was focused on the synthesis and discussed the spectroscopic characterizations of four new scandium(Ⅲ)sulfa-drug complexes.The nomenclature and symbols of these drugs were sulfadimidine(sulp-1),su...Herein,this article was focused on the synthesis and discussed the spectroscopic characterizations of four new scandium(Ⅲ)sulfa-drug complexes.The nomenclature and symbols of these drugs were sulfadimidine(sulp-1),sulfanilamide(sulp-2),sulfamethoxazole(sulp-3)and sulfadiazine(sulp-4).The microanalytical and spectroscopic analyses which utilized in this study were micro-analyses,magnetic,FT-IR,UV-Vis techniques.The mid infrared spectra deduced that the four sulfa-drug chelates acts as a bidentate chelates with scandium(Ⅲ)ion via two nitrogen atoms of-NH2-Ar and-NH-SO2 groups.Also,the FTIR spectra of Sc3+complexes referred to the existed of new medium weak bands in the range of 500~400 cm^-1 due to stretching vibration bands ofν(M-N).The elemental analysis technique confirmed the 1∶2 stoichiometry between Sc3+ions and sulp ligand with molecular formula[Sc(sulp)2(Cl)2]·Cl.At room temperature,the results of magnetic measurements for the Sc(Ⅲ)complexes indicated that all of the synthesized complexes have a diamagnetic character with octahedral configuration.The electronic spectra of the free sulfa-drug ligands shows band at 275 and 310 nm which are intraligand charge transfer band.The electronic sbsorption spectra of the Sc3+complexes were recorded using DMSO solvent.The spectra of complexes display bands within 275~388 nm,which attributed toπ-π*,n-π*and charge-transfer M-LCT electronic transitions,which strongly favors the octahedral geometry around Sc(Ⅲ)metal ions.1HNMR spectra of complexes referred to the downfield proton shifts of the-NH2 and NHSO2 groups,which supported the place of coordination.The half maximal inhibitory concentration(IC50)of the ScⅢcomplexes was assessed against the human hepato cellular carcinoma(HepG-2)tumor cell line.展开更多
基金Project(51206033)supported by the National Natural Science Foundation of ChinaProjects(2011M500652,2013T60354)supported by the China Postdoctoral Science FoundationProject(2011LBH-Z11139)supported by the Heilongjiang Postdoctoral Science Foundation,China
文摘In order to investigate the effect of additives and nano-particle on the surface tensions of lithium bromide(Li Br) aqueous solution/ammonia, many experiments were carried out based on Wilhelmy plate method. Firstly, the surface tension of Li Br aqueous solution with 1-octanol was measured and then the comparison between the measured results and previous experimental results was given to verify the measuring accuracy. Some new additives, such as cationic surfactants cetyltrimethyl ammonium chloride(CTAC), and cetyltrimethyl ammonium bromide(CTAB) were chosen in the experiments. The experimental results show that CTAC and CTAB can obviously reduce the surface tension of Li Br aqueous solution/ammonia. In addition, it is found that nano-particles cannot remarkably decrease the surface tension of Li Br aqueous solution/ammonia. However, the mixed addition of additives and nano-particles can remarkably affect the surface tension of Li Br aqueous solution/ammonia. That is to say, additives play more important role in reducing the surface tension of Li Br aqueous solution/ammonia. But nano-particles may enhance the heat transfer in the absorption refrigeration process.
基金Project(20806035)supported by the National Natural Science Foundation of ChinaProject(2009CI026)supported by the Back-up Personnel Foundation of Academic and Technology Leaders of Yunnan Province,ChinaProject(KKZ6200927001)supported by the Opening Fund of Key Laboratory of Inorganic Coating Materials,Chinese Academy of Sciences
文摘Ni-W-P composite coatings reinforced by Ce O2 and Si O2 nano-particles on the surface of common carbon steels, were prepared by double pulse electrodeposition. The crystallization course was characterized by phase structures, crystallinity, grain sizes and microstructures. The results indicate that as-deposited composite coating is amorphous. Whereas it turns into the crystalline structure with 98.25% crystallinity, and Ni3 P, Ni2 P and Ni5P2 alloy phases precipitate from structures at 400 °C. Thereafter, Ni2 P and Ni5P2 metastable alloy phases turn into Ni3 P stable alloy phase at 500 °C. The crystallization course of the composite coating has finished when being heat-treated at 700 °C. The average sizes of Ni grains increase with the rise of heat treatment temperature from400 °C to 700 °C. Ce O2 and Si O2 nano-particles deposited into Ni-W-P alloys can delay the crystallization course and habit the growth of alloy phases.
文摘Rutile phase exhibits higher refractive index and h id ing power, good chemical stability, and is becoming a candidate material for the high-temperature separation and catalysis applications. The thermodynamically stable feature of rutile among the three polymorphs of TiO 2 usually hinders ob taining nano-sized rutile phase by a conventional calcining way. However, acid peptization of amorphous TiO 2 is favorable to the formation of rutile phase. I n this work, well-crystallized and well-dispersed rod-like rutile particles w ith specific surface areas of 49.1 and 35.0 m 2/g were prepared by hydrothermal ly treating the acid peptized TiO 2 amorphous sols at relatively low temperatur es of 200 ℃ or 240 ℃, respectively. The formation of non-touching rutile part icles is attributed to high long-range electrostatic forces between particles i n the presence of the high concentration of the peptizer. The acid peptization w ould easily break the ≡Ti-O-Ti≡ bonds to form ≡Ti-OH or HO-Ti-OH species depending on the amount of acid, and create conditions for the formation of rut ile nuclei after structural rearrangements.
文摘Due to the biological risks of using the conventional lubricants,the vegetable oils have been considered nowadays.Besides,to improve the tribological properties of the vegetable oils in various applications like metal forming processes,nanoparticles have been used as additives.This research evaluated the lubrication performance of the Al2O3 and TiO2 nanoparticles dispersed in rapeseed oil during the parallel tubular channel angular pressing (PTCAP) process.The experimental PTCAP tests have been fulfilled under three lubrication conditions and the comparison between the PTCAP processed tubes has been performed in terms of the maximum forming force,surface roughness,and microhardness.The experimental results indicate that adding the mentioned nanoparticles has caused at least a 50% reduction in the maximum deformation load.Moreover,a remarkable decrement in the surface roughness of the formed tubes has been obtained.
文摘Herein,this article was focused on the synthesis and discussed the spectroscopic characterizations of four new scandium(Ⅲ)sulfa-drug complexes.The nomenclature and symbols of these drugs were sulfadimidine(sulp-1),sulfanilamide(sulp-2),sulfamethoxazole(sulp-3)and sulfadiazine(sulp-4).The microanalytical and spectroscopic analyses which utilized in this study were micro-analyses,magnetic,FT-IR,UV-Vis techniques.The mid infrared spectra deduced that the four sulfa-drug chelates acts as a bidentate chelates with scandium(Ⅲ)ion via two nitrogen atoms of-NH2-Ar and-NH-SO2 groups.Also,the FTIR spectra of Sc3+complexes referred to the existed of new medium weak bands in the range of 500~400 cm^-1 due to stretching vibration bands ofν(M-N).The elemental analysis technique confirmed the 1∶2 stoichiometry between Sc3+ions and sulp ligand with molecular formula[Sc(sulp)2(Cl)2]·Cl.At room temperature,the results of magnetic measurements for the Sc(Ⅲ)complexes indicated that all of the synthesized complexes have a diamagnetic character with octahedral configuration.The electronic spectra of the free sulfa-drug ligands shows band at 275 and 310 nm which are intraligand charge transfer band.The electronic sbsorption spectra of the Sc3+complexes were recorded using DMSO solvent.The spectra of complexes display bands within 275~388 nm,which attributed toπ-π*,n-π*and charge-transfer M-LCT electronic transitions,which strongly favors the octahedral geometry around Sc(Ⅲ)metal ions.1HNMR spectra of complexes referred to the downfield proton shifts of the-NH2 and NHSO2 groups,which supported the place of coordination.The half maximal inhibitory concentration(IC50)of the ScⅢcomplexes was assessed against the human hepato cellular carcinoma(HepG-2)tumor cell line.
