Reduction of conservatism is one of the key and difficult problems in missile robust gain scheduling autopilot design based on multipliers.This article presents a scheme of adopting linear parameter-varying（LPV） con...Reduction of conservatism is one of the key and difficult problems in missile robust gain scheduling autopilot design based on multipliers.This article presents a scheme of adopting linear parameter-varying（LPV） control approach with full block multipliers to design a missile robust gain scheduling autopilot in order to eliminate conservatism.A model matching design structure with a high demand on matching precision is constructed based on the missile linear fractional transformation（LFT） model.By applying full block S-procedure and elimination lemma,a convex feasibility problem with an infinite number of constraints is formulated to satisfy robust quadratic performance specifications.Then a grid method is adopted to transform the infinite-dimensional convex feasibility problem into a solvable finite-dimensional convex feasibility problem,based on which a gain scheduling controller with linear fractional dependence on the flight Mach number and altitude is derived.Static and dynamic simulation results show the effectiveness and feasibility of the proposed scheme.展开更多
Self-aligned Titanium Silicide (Salicide), Light-Doped Drain (LDD) technology was studied. Results show that, this technology suppresses effectivily short-channel effects. The sheet resistance of active region decreas...Self-aligned Titanium Silicide (Salicide), Light-Doped Drain (LDD) technology was studied. Results show that, this technology suppresses effectivily short-channel effects. The sheet resistance of active region decreases by four times. The sheet resistance of polysilicon gate region decreases by one order of magnitute. Using this technology, the speed of the 3 μm NMOS 12-bits multiplier increases by two times relative to conventional one.展开更多
研究线性终端状态约束下不定随机线性二次最优控制问题．首先利用Lagrange mul tiplier定理得到了存在最优线性状态反馈解的必要条件,而在加强的条件下也得到了最优控制存在的充分条件．从某种意义上讲,以往关于无约束随机线性二次最优...研究线性终端状态约束下不定随机线性二次最优控制问题．首先利用Lagrange mul tiplier定理得到了存在最优线性状态反馈解的必要条件,而在加强的条件下也得到了最优控制存在的充分条件．从某种意义上讲,以往关于无约束随机线性二次最优控制的一些结果可以看成本文主要定理的推论．展开更多
By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating ...By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating the position and velocity of a moving source is proposed. By utilizing the Lagrange multipliers technique, the known relation between the intermediate variables and the source location coordinates could be exploited to constrain the solution. And without requiring apriori knowledge of TDOA and FDOA measurement noises, the proposed algorithm can satisfy the demand of practical applications. Additionally, on basis of con- volute and polynomial rooting operations, the Lagrange multipliers can be obtained efficiently and robustly allowing real-time imple- mentation and global convergence. Simulation results show that the proposed estimator achieves remarkably better performance than the two-step weighted least square （WLS） approach especially for higher measurement noise level.展开更多
In this work, power efficient butterfly unit based FFT architecture is presented. The butterfly unit is designed using floating-point fused arithmetic units. The fused arithmetic units include two-term dot product uni...In this work, power efficient butterfly unit based FFT architecture is presented. The butterfly unit is designed using floating-point fused arithmetic units. The fused arithmetic units include two-term dot product unit and add-subtract unit. In these arithmetic units, operations are performed over complex data values. A modified fused floating-point two-term dot product and an enhanced model for the Radix-4 FFT butterfly unit are proposed. The modified fused two-term dot product is designed using Radix-16 booth multiplier. Radix-16 booth multiplier will reduce the switching activities compared to Radix-8 booth multiplier in existing system and also will reduce the area required. The proposed architecture is implemented efficiently for Radix-4 decimation in time(DIT) FFT butterfly with the two floating-point fused arithmetic units. The proposed enhanced architecture is synthesized, implemented, placed and routed on a FPGA device using Xilinx ISE tool. It is observed that the Radix-4 DIT fused floating-point FFT butterfly requires 50.17% less space and 12.16% reduced power compared to the existing methods and the proposed enhanced model requires 49.82% less space on the FPGA device compared to the proposed design. Also, reduced power consumption is addressed by utilizing the reusability technique, which results in 11.42% of power reduction of the enhanced model compared to the proposed design.展开更多
This paper concentrates on super-resolution imaging of the ship target under the sparse aperture situation.Firstly,a multi-static configuration is utilized to solve the coherent processing interval(CPI)problem caused ...This paper concentrates on super-resolution imaging of the ship target under the sparse aperture situation.Firstly,a multi-static configuration is utilized to solve the coherent processing interval(CPI)problem caused by the slow-speed motion of ship targets.Then,we realize signal restoration and image reconstruction with the alternating direction method of multipliers(ADMM).Furthermore,we adopt the interferometric technique to produce the three-dimensional(3D)images of ship targets,namely interferometric inverse synthetic aperture radar(InISAR)imaging.Experiments based on the simulated data are utilized to verify the validity of the proposed method.展开更多
An active set truncated-Newton algorithm (ASTNA) is proposed to solve the large-scale bound constrained sub-problems. The global convergence of the algorithm is obtained and two groups of numerical experiments are mad...An active set truncated-Newton algorithm (ASTNA) is proposed to solve the large-scale bound constrained sub-problems. The global convergence of the algorithm is obtained and two groups of numerical experiments are made for the various large-scale problems of varying size. The comparison results between ASTNA and the subspace limited memory quasi-Newton algorithm and between the modified augmented Lagrange multiplier methods combined with ASTNA and the modified barrier function method show the stability and effectiveness of ASTNA for simultaneous optimization of distillation column.展开更多
This paper proposes an effective algorithm to work out the linear parameter-varying (LPV) framework autopilot for the air defense missile so as to simultaneously guarantee the closed-loop system properties globally an...This paper proposes an effective algorithm to work out the linear parameter-varying (LPV) framework autopilot for the air defense missile so as to simultaneously guarantee the closed-loop system properties globally and locally, which evidently reduces the number of unknown variables and hence increases the computational efficiency. The notion of 'robust quadratic stability' is inducted to meet the global properties, including the robust stability and robust performance, while the regional pole placement scheme together with the adoption of a model matching structure is involved to satisfy the dynamic performance, including limiting the 'fast poles'. In order to reduce the conservatism, the full block multiplier is employed to depict the properties, with all specifications generalized in integral quadratic constraint frame and finally transformed into linear matrix inequalities for tractable solutions through convex optimization. Simulation results validate the performance of the designed robust LPV autopilot and the proposed framework control method integrating with the full block multiplier approach and the regional pole placement scheme, and demonstrate the efficiency of the algorithm. An efficient algorithm for the air defense missile is proposed to satisfy the required global stability and local dynamical properties by a varying controller according to the flight conditions, and shows sufficient promise in the computational efficiency and the real-time performance of the missile-borne computer system.展开更多
The paper studies the non-zero slacks in data envelopment analysis. A procedure is developed for the treatment of non-zero slacks. DEA projections can be done just in one step.
To reasonably design the blade-tip radial running clearance(BTRRC) of high pressure turbine and improve the performance and reliability of gas turbine, the multi-object multi-discipline reliability sensitivity analysi...To reasonably design the blade-tip radial running clearance(BTRRC) of high pressure turbine and improve the performance and reliability of gas turbine, the multi-object multi-discipline reliability sensitivity analysis of BTRRC was accomplished from a probabilistic prospective by considering nonlinear material attributes and dynamic loads. Firstly, multiply response surface model(MRSM) was proposed and the mathematical model of this method was established based on quadratic function. Secondly, the BTRRC was decomposed into three sub-components(turbine disk, blade and casing), and then the single response surface functions(SRSFs) of three structures were built in line with the basic idea of MRSM. Thirdly, the response surface function(MRSM) of BTRRC was reshaped by coordinating SRSFs. From the analysis, it is acquired to probabilistic distribution characteristics of input-output variables, failure probabilities of blade-tip clearance under different static blade-tip clearances δ and major factors impacting BTRRC. Considering the reliability and efficiency of gas turbine, δ=1.87 mm is an optimally acceptable option for rational BTRRC. Through the comparison of three analysis methods(Monte Carlo method, traditional response surface method and MRSM), the results show that MRSM has higher accuracy and higher efficiency in reliability sensitivity analysis of BTRRC. These strengths are likely to become more prominent with the increasing times of simulations. The present study offers an effective and promising approach for reliability sensitivity analysis and optimal design of complex dynamic assembly relationship.展开更多
The multiply type-I censoring represented that all units in life test were terminated at different times. For estimations of Weibull parameters, it was easy to compute the maximum likelihood estimation （MLE） and lea...The multiply type-I censoring represented that all units in life test were terminated at different times. For estimations of Weibull parameters, it was easy to compute the maximum likelihood estimation （MLE） and least-squares estimation （LSE） while it was hard to build confidence intervals （CI）. The concept of generalized confidence interval （GCI） was introduced to build CIs of parameters under multiply type-I censoring. Further, GCI based on LSE and GCI based on MLE were proposed. It is mathematically proved that the former is exact and the latter is approximate. Besides, a Monte Carlo simulation study and an illustrative example also Ran out that the GCI method based on LSE yields rather satisfactory results by comparison with the ones based on MLE. It should be clear that the GCI method is a sensible choice to evaluate reliability under multiply type-I censoring.展开更多
The addition of electrons to form gas-phase multiply charged anions(MCAs)normally requires sophisticated experiments or calculations.In this work,the factors stabilizing the MCAs,the maximum electron uptake of gas-pha...The addition of electrons to form gas-phase multiply charged anions(MCAs)normally requires sophisticated experiments or calculations.In this work,the factors stabilizing the MCAs,the maximum electron uptake of gas-phase molecules,X,and the electronic stability of MCAs X^(Q-),are discussed.The drawbacks encountered when applying computational and/or conceptual density functional theory(DFT)to MCAs are highlighted.We develop and test a different model based on the valence-state concept.As in DFT,the electronic energy,E(N,v_(ex)),is a continuous function of the average electron number,N,and the external potential,v_(ex),of the nuclei.The valence-state-parabola is a second-order polynomial that allows extending E(N,v_(ex))to dianions and higher MCAs.The model expresses the maximum electron acceptance,Q_(max),and the higher electron affinities,A_Q,as simple functions of the firstelectron affinity,A_1,and the ionization energy,I,of the"ancestor"system.Thus,the maximum electron acceptance is Q_(max,calc)=1+12A_1/7(I-A_1).The ground-state parabola model of the conceptual DFT yields approximately half of this value,and it is termed Q_(max,GS)=?+A_1/(I-A_1).A large variety of molecules are evaluated including fullerenes,metal clusters,super-pnictogens,super-halogens(OF_3),super-alkali species(OLi_3),and neutral or charged transition-metal complexes,AB_(m )L_n^(0/+/-).The calculated second electron affinity A_(2,calc)=A_1-(7/12)(I-A_1)is linearly correlated to the literature references A_(2,lit) with a correlation coefficient R=0.998.A_2 or A_3 values are predicted for further 24 species.The appearance sizes,n_(ap)^(3-),of triply charged anionic clusters and fullerenes are calculated in agreement with the literature.展开更多
Popenda J 导出二阶线性差分方程解的表达式的方法(见文[1])显然很难用于研究更高阶的差分方程,本文从另一途径,获得了如下定理设 a_i(t),r(t)∶N={t∶t≥0,t 是整数}→R,(i=0,1,2,……,n-1),则差分方程x(t+n)+sum from i=0 to n-1 ci (...Popenda J 导出二阶线性差分方程解的表达式的方法(见文[1])显然很难用于研究更高阶的差分方程,本文从另一途径,获得了如下定理设 a_i(t),r(t)∶N={t∶t≥0,t 是整数}→R,(i=0,1,2,……,n-1),则差分方程x(t+n)+sum from i=0 to n-1 ci (t)x(t+i)=r(t),t∈N (1)的解可表为向量(multiply from t1=1 to t-1 C(t1))X(1)+sum from t1=1 to t-1[multiply from t2=t1+1 to t-1 (C(t2)+E)]Q(t1),t∈N (2)展开更多
文摘Reduction of conservatism is one of the key and difficult problems in missile robust gain scheduling autopilot design based on multipliers.This article presents a scheme of adopting linear parameter-varying（LPV） control approach with full block multipliers to design a missile robust gain scheduling autopilot in order to eliminate conservatism.A model matching design structure with a high demand on matching precision is constructed based on the missile linear fractional transformation（LFT） model.By applying full block S-procedure and elimination lemma,a convex feasibility problem with an infinite number of constraints is formulated to satisfy robust quadratic performance specifications.Then a grid method is adopted to transform the infinite-dimensional convex feasibility problem into a solvable finite-dimensional convex feasibility problem,based on which a gain scheduling controller with linear fractional dependence on the flight Mach number and altitude is derived.Static and dynamic simulation results show the effectiveness and feasibility of the proposed scheme.
文摘Self-aligned Titanium Silicide (Salicide), Light-Doped Drain (LDD) technology was studied. Results show that, this technology suppresses effectivily short-channel effects. The sheet resistance of active region decreases by four times. The sheet resistance of polysilicon gate region decreases by one order of magnitute. Using this technology, the speed of the 3 μm NMOS 12-bits multiplier increases by two times relative to conventional one.
文摘针对物联网设备部署在较偏远地区而导致的传输链路易受损或传输覆盖范围有限等问题,在此场景中引入无人机和移动边缘计算(mobile edge computing, MEC)技术,有效改善物联网设备能源供给,优化计算资源,同时提升通信覆盖范围,减少不必要的网络开销.另外,区块链技术的引入保证了数据计算卸载与交互过程中的安全性和可靠性,实现了数据共享.因此,面向无人机辅助的物联网系统提出一种融合MEC和区块链的资源分配决策方法,以实现MEC系统和区块链系统性能的最佳权衡为目标,综合考虑频谱资源和计算资源的分配,构建问题模型,并采用基于交替方向乘子(alternating direction method of multipliers, ADMM)法的分布式优化算法求解该优化问题.仿真结果表明,所提优化框架可以有效减少MEC系统的总能耗和区块链系统的计算时延.同时,所提方法具有良好的收敛性能,系统稳定性得到充分保证.
基金supported by the National High Technology Research and Development Program of China (863 Program) (2010AA7010422 2011AA7014061)
文摘By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating the position and velocity of a moving source is proposed. By utilizing the Lagrange multipliers technique, the known relation between the intermediate variables and the source location coordinates could be exploited to constrain the solution. And without requiring apriori knowledge of TDOA and FDOA measurement noises, the proposed algorithm can satisfy the demand of practical applications. Additionally, on basis of con- volute and polynomial rooting operations, the Lagrange multipliers can be obtained efficiently and robustly allowing real-time imple- mentation and global convergence. Simulation results show that the proposed estimator achieves remarkably better performance than the two-step weighted least square （WLS） approach especially for higher measurement noise level.
文摘In this work, power efficient butterfly unit based FFT architecture is presented. The butterfly unit is designed using floating-point fused arithmetic units. The fused arithmetic units include two-term dot product unit and add-subtract unit. In these arithmetic units, operations are performed over complex data values. A modified fused floating-point two-term dot product and an enhanced model for the Radix-4 FFT butterfly unit are proposed. The modified fused two-term dot product is designed using Radix-16 booth multiplier. Radix-16 booth multiplier will reduce the switching activities compared to Radix-8 booth multiplier in existing system and also will reduce the area required. The proposed architecture is implemented efficiently for Radix-4 decimation in time(DIT) FFT butterfly with the two floating-point fused arithmetic units. The proposed enhanced architecture is synthesized, implemented, placed and routed on a FPGA device using Xilinx ISE tool. It is observed that the Radix-4 DIT fused floating-point FFT butterfly requires 50.17% less space and 12.16% reduced power compared to the existing methods and the proposed enhanced model requires 49.82% less space on the FPGA device compared to the proposed design. Also, reduced power consumption is addressed by utilizing the reusability technique, which results in 11.42% of power reduction of the enhanced model compared to the proposed design.
基金This work was supported by the National Natural Science Foundation of China(61871146).
文摘This paper concentrates on super-resolution imaging of the ship target under the sparse aperture situation.Firstly,a multi-static configuration is utilized to solve the coherent processing interval(CPI)problem caused by the slow-speed motion of ship targets.Then,we realize signal restoration and image reconstruction with the alternating direction method of multipliers(ADMM).Furthermore,we adopt the interferometric technique to produce the three-dimensional(3D)images of ship targets,namely interferometric inverse synthetic aperture radar(InISAR)imaging.Experiments based on the simulated data are utilized to verify the validity of the proposed method.
基金Project (2002CB312200) supported by the National Key Basic Research and Development Program of China Project(03JJY3109) supported by the Natural Science Foundation of Hunan Province
文摘An active set truncated-Newton algorithm (ASTNA) is proposed to solve the large-scale bound constrained sub-problems. The global convergence of the algorithm is obtained and two groups of numerical experiments are made for the various large-scale problems of varying size. The comparison results between ASTNA and the subspace limited memory quasi-Newton algorithm and between the modified augmented Lagrange multiplier methods combined with ASTNA and the modified barrier function method show the stability and effectiveness of ASTNA for simultaneous optimization of distillation column.
基金supported by the National Natural Science Foundation of China(11532002)
文摘This paper proposes an effective algorithm to work out the linear parameter-varying (LPV) framework autopilot for the air defense missile so as to simultaneously guarantee the closed-loop system properties globally and locally, which evidently reduces the number of unknown variables and hence increases the computational efficiency. The notion of 'robust quadratic stability' is inducted to meet the global properties, including the robust stability and robust performance, while the regional pole placement scheme together with the adoption of a model matching structure is involved to satisfy the dynamic performance, including limiting the 'fast poles'. In order to reduce the conservatism, the full block multiplier is employed to depict the properties, with all specifications generalized in integral quadratic constraint frame and finally transformed into linear matrix inequalities for tractable solutions through convex optimization. Simulation results validate the performance of the designed robust LPV autopilot and the proposed framework control method integrating with the full block multiplier approach and the regional pole placement scheme, and demonstrate the efficiency of the algorithm. An efficient algorithm for the air defense missile is proposed to satisfy the required global stability and local dynamical properties by a varying controller according to the flight conditions, and shows sufficient promise in the computational efficiency and the real-time performance of the missile-borne computer system.
文摘The paper studies the non-zero slacks in data envelopment analysis. A procedure is developed for the treatment of non-zero slacks. DEA projections can be done just in one step.
基金Projects(51175017,51245027)supported by the National Natural Science Foundation of China
文摘To reasonably design the blade-tip radial running clearance(BTRRC) of high pressure turbine and improve the performance and reliability of gas turbine, the multi-object multi-discipline reliability sensitivity analysis of BTRRC was accomplished from a probabilistic prospective by considering nonlinear material attributes and dynamic loads. Firstly, multiply response surface model(MRSM) was proposed and the mathematical model of this method was established based on quadratic function. Secondly, the BTRRC was decomposed into three sub-components(turbine disk, blade and casing), and then the single response surface functions(SRSFs) of three structures were built in line with the basic idea of MRSM. Thirdly, the response surface function(MRSM) of BTRRC was reshaped by coordinating SRSFs. From the analysis, it is acquired to probabilistic distribution characteristics of input-output variables, failure probabilities of blade-tip clearance under different static blade-tip clearances δ and major factors impacting BTRRC. Considering the reliability and efficiency of gas turbine, δ=1.87 mm is an optimally acceptable option for rational BTRRC. Through the comparison of three analysis methods(Monte Carlo method, traditional response surface method and MRSM), the results show that MRSM has higher accuracy and higher efficiency in reliability sensitivity analysis of BTRRC. These strengths are likely to become more prominent with the increasing times of simulations. The present study offers an effective and promising approach for reliability sensitivity analysis and optimal design of complex dynamic assembly relationship.
基金Project(71371182) supported by the National Natural Science Foundation of China
文摘The multiply type-I censoring represented that all units in life test were terminated at different times. For estimations of Weibull parameters, it was easy to compute the maximum likelihood estimation （MLE） and least-squares estimation （LSE） while it was hard to build confidence intervals （CI）. The concept of generalized confidence interval （GCI） was introduced to build CIs of parameters under multiply type-I censoring. Further, GCI based on LSE and GCI based on MLE were proposed. It is mathematically proved that the former is exact and the latter is approximate. Besides, a Monte Carlo simulation study and an illustrative example also Ran out that the GCI method based on LSE yields rather satisfactory results by comparison with the ones based on MLE. It should be clear that the GCI method is a sensible choice to evaluate reliability under multiply type-I censoring.
文摘The addition of electrons to form gas-phase multiply charged anions(MCAs)normally requires sophisticated experiments or calculations.In this work,the factors stabilizing the MCAs,the maximum electron uptake of gas-phase molecules,X,and the electronic stability of MCAs X^(Q-),are discussed.The drawbacks encountered when applying computational and/or conceptual density functional theory(DFT)to MCAs are highlighted.We develop and test a different model based on the valence-state concept.As in DFT,the electronic energy,E(N,v_(ex)),is a continuous function of the average electron number,N,and the external potential,v_(ex),of the nuclei.The valence-state-parabola is a second-order polynomial that allows extending E(N,v_(ex))to dianions and higher MCAs.The model expresses the maximum electron acceptance,Q_(max),and the higher electron affinities,A_Q,as simple functions of the firstelectron affinity,A_1,and the ionization energy,I,of the"ancestor"system.Thus,the maximum electron acceptance is Q_(max,calc)=1+12A_1/7(I-A_1).The ground-state parabola model of the conceptual DFT yields approximately half of this value,and it is termed Q_(max,GS)=?+A_1/(I-A_1).A large variety of molecules are evaluated including fullerenes,metal clusters,super-pnictogens,super-halogens(OF_3),super-alkali species(OLi_3),and neutral or charged transition-metal complexes,AB_(m )L_n^(0/+/-).The calculated second electron affinity A_(2,calc)=A_1-(7/12)(I-A_1)is linearly correlated to the literature references A_(2,lit) with a correlation coefficient R=0.998.A_2 or A_3 values are predicted for further 24 species.The appearance sizes,n_(ap)^(3-),of triply charged anionic clusters and fullerenes are calculated in agreement with the literature.
文摘Popenda J 导出二阶线性差分方程解的表达式的方法(见文[1])显然很难用于研究更高阶的差分方程,本文从另一途径,获得了如下定理设 a_i(t),r(t)∶N={t∶t≥0,t 是整数}→R,(i=0,1,2,……,n-1),则差分方程x(t+n)+sum from i=0 to n-1 ci (t)x(t+i)=r(t),t∈N (1)的解可表为向量(multiply from t1=1 to t-1 C(t1))X(1)+sum from t1=1 to t-1[multiply from t2=t1+1 to t-1 (C(t2)+E)]Q(t1),t∈N (2)
