Springback of a SUS321 complex geometry part formed by the multi-stage rigid-flexible compound process was studied through numerical simulations and laboratory experiments in this work.The sensitivity analysis was pro...Springback of a SUS321 complex geometry part formed by the multi-stage rigid-flexible compound process was studied through numerical simulations and laboratory experiments in this work.The sensitivity analysis was provided to have an insight in the effect of the evaluated process parameters.Furthermore,in order to minimize the springback problem,an accurate springback simulation model of the part was established and validated.The effects of the element size and timesteps on springback model were further investigated.Results indicate that the custom mesh size is beneficial for the springback simulation,and the four timesteps are found suited for the springback analysis for the complex geometry part.Finally,a strategy for reducing the springback by changing the geometry of the blank is proposed.The optimal blank geometry is obtained and used for manufacturing the part.展开更多
A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision pr...A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision process, and contains a point-mass model for the dynamics of an aircraft and takes into account the decision maker＇s preferences under uncertain conditions. Considering an active opponent, the opponent＇s maneuvers can be modeled stochastically. The solution of multistage influence diagram can be obtained by converting the multistage influence diagram into a two-level optimization problem. The simulation results show the model is effective.展开更多
Multi-stage triaxial compression tests for cylindrical red sandstone specimens(diameter of 50 mm,height of 100 mm) were carried out with a rock mechanics testing system and spatial acoustic emission(AE) locations were...Multi-stage triaxial compression tests for cylindrical red sandstone specimens(diameter of 50 mm,height of 100 mm) were carried out with a rock mechanics testing system and spatial acoustic emission(AE) locations were obtained by adopting an AE monitoring system.Based on spatial AE distribution evolution of red sandstone during multi-stage triaxial deformation,the relation between spatial AE events and triaxial deformation of red sandstone was analyzed.The results show that before peak strength,the spatial AE events are not active and distribute stochastically in the specimen,while after peak strength,the spatial AE events are very active and focus on a local region beyond final microscopic failure plane.During multi-stage triaxial deformation with five different confining pressures,the spatial AE distribution evolution in the red sandstone was obtained.The obtained spatial AE locations of red sandstone at the final confining pressure agree very well with the ultimate failure experimental mode.Finally,the influence of confining pressure on the spatial AE evolution characteristics of red sandstone during triaxial deformation was discussed.The AE behavior of red sandstone during multi-stage triaxial deformation is interpreted in the light of the Kaiser effect,which has a significant meaning for predicting the unstable failure of engineering rock mass.展开更多
Grid-connected current control is one.of the important control schemes in distributed generation systems.A lot of control methods have been developed,such as hysteresis control,dead-beat control,one-cycle control,etc....Grid-connected current control is one.of the important control schemes in distributed generation systems.A lot of control methods have been developed,such as hysteresis control,dead-beat control,one-cycle control,etc.Hysteresis current control has the advantages of simplicity,robustness and good large-signal response.Unfortunately,the switching frequency of the converter using hysteresis current control varies according to the parameters of the bus voltage,the filter inductor and the bandwidth.Increasing the hysteresis bandwidth and the filter inductance can reduce the switching frequency.展开更多
Equipment development planning(EDP)is usually a long-term process often performed in an environment with high uncertainty.The traditional multi-stage dynamic programming cannot cope with this kind of uncertainty with ...Equipment development planning(EDP)is usually a long-term process often performed in an environment with high uncertainty.The traditional multi-stage dynamic programming cannot cope with this kind of uncertainty with unpredictable situations.To deal with this problem,a multi-stage EDP model based on a deep reinforcement learning(DRL)algorithm is proposed to respond quickly to any environmental changes within a reasonable range.Firstly,the basic problem of multi-stage EDP is described,and a mathematical planning model is constructed.Then,for two kinds of uncertainties(future capabi lity requirements and the amount of investment in each stage),a corresponding DRL framework is designed to define the environment,state,action,and reward function for multi-stage EDP.After that,the dueling deep Q-network(Dueling DQN)algorithm is used to solve the multi-stage EDP to generate an approximately optimal multi-stage equipment development scheme.Finally,a case of ten kinds of equipment in 100 possible environments,which are randomly generated,is used to test the feasibility and effectiveness of the proposed models.The results show that the algorithm can respond instantaneously in any state of the multistage EDP environment and unlike traditional algorithms,the algorithm does not need to re-optimize the problem for any change in the environment.In addition,the algorithm can flexibly adjust at subsequent planning stages in the event of a change to the equipment capability requirements to adapt to the new requirements.展开更多
Although multi-stage incremental sheet forming has always been adopted instead of single-stage forming to form parts with a steep wall angle or to achieve a high forming performance, it is largely dependent on empiric...Although multi-stage incremental sheet forming has always been adopted instead of single-stage forming to form parts with a steep wall angle or to achieve a high forming performance, it is largely dependent on empirical designs. In order to research multi-stage forming further, the effect of forming stages(n) and angle interval between the two adjacent stages(Δα) on thickness distribution was investigated. Firstly, a finite element method(FEM) model of multi-stage incremental forming was established and experimentally verified. Then, based on the proposed simulation model, different strategies were adopted to form a frustum of cone with wall angle of 30° to research the thickness distribution of multi-pass forming. It is proved that the minimum thickness increases largely and the variance of sheet thickness decreases significantly as the value of n grows. Further, with the increase of Δα, the minimum thickness increases initially and then decreases, and the optimal thickness distribution is achieved with Δα of 10°.Additionally, a formula is deduced to estimate the sheet thickness after multi-stage forming and proved to be effective. And the simulation results fit well with the experimental results.展开更多
The yield stress of waxy crude oil is a fundamental parameter in the calculation of pipelining technique and analysis of flow safety for the heated oil transported through pipeline.Daqing crude oil was studied and the...The yield stress of waxy crude oil is a fundamental parameter in the calculation of pipelining technique and analysis of flow safety for the heated oil transported through pipeline.Daqing crude oil was studied and the variation of yield stress with shear history was explored through simulation experiment of pipelining.It is found that the effect of throughput variation or shear rate on yield stress is not obvious.With the decrease of final dynamic cooling temperature,the yield stress of waxy crude oil decreases,but there exists a little increase at the beginning.The prediction model of yield stress for waxy crude oil under the condition of shutdown is developed and it can be used to predict the yield stress of Daqing crude oil at certain heating temperature,final dynamic cooling temperature and measurement temperature.For the 139 groups of yield stress data of Daqing crude oil from the simulation experiment of pipelining,the result of prediction with this model shows that the average relative deviation between the yield stress measured and predicted is 30.27%,and the coefficient of correlation is 0.962 3.展开更多
The Neoproterozoic Riviera W-REE-Mo deposit is one of the largest unmined tungsten resources in the world and is associated with pervasively altered A-type granites of the Neoproterozoic Cape Granite Suite Western Cap...The Neoproterozoic Riviera W-REE-Mo deposit is one of the largest unmined tungsten resources in the world and is associated with pervasively altered A-type granites of the Neoproterozoic Cape Granite Suite Western Cape, South Africa. The present study investigated the mineral chemistry of scheelite, the principal ore mineral with the aim to record the variation of solid solution molybdenum for geometallurgical purposes and also as an indicator of changing redox conditions of the mineralizing hydrothermal fluids. Methodology included UV-fluorescence studies and micro-analyses by LA-ICP-MS. Results have shown that at least four phases of scheelite are hosted by the endoskarn zone, potassic alteration zone and various quartz-carbonate veins. This reflects hydrothermal fluid evolution from early stage reduced to late stage, vein associated and more oxidized. The molybdenum content of the dominant early phase scheelite is low and renders the deposit amenable to low penalty mineral recovery.展开更多
基金Project(2014ZX04002041)supported by the National Science and Technology Major Project,ChinaProject(51175024)supported by the National Natural Science Foundation of China
文摘Springback of a SUS321 complex geometry part formed by the multi-stage rigid-flexible compound process was studied through numerical simulations and laboratory experiments in this work.The sensitivity analysis was provided to have an insight in the effect of the evaluated process parameters.Furthermore,in order to minimize the springback problem,an accurate springback simulation model of the part was established and validated.The effects of the element size and timesteps on springback model were further investigated.Results indicate that the custom mesh size is beneficial for the springback simulation,and the four timesteps are found suited for the springback analysis for the complex geometry part.Finally,a strategy for reducing the springback by changing the geometry of the blank is proposed.The optimal blank geometry is obtained and used for manufacturing the part.
文摘A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision process, and contains a point-mass model for the dynamics of an aircraft and takes into account the decision maker＇s preferences under uncertain conditions. Considering an active opponent, the opponent＇s maneuvers can be modeled stochastically. The solution of multistage influence diagram can be obtained by converting the multistage influence diagram into a two-level optimization problem. The simulation results show the model is effective.
基金Project(2014CB046905)supported by the National Basic Research Program of ChinaProject(2014YC10)supported by the Fundamental Research Funds for the Central Universities,China
文摘Multi-stage triaxial compression tests for cylindrical red sandstone specimens(diameter of 50 mm,height of 100 mm) were carried out with a rock mechanics testing system and spatial acoustic emission(AE) locations were obtained by adopting an AE monitoring system.Based on spatial AE distribution evolution of red sandstone during multi-stage triaxial deformation,the relation between spatial AE events and triaxial deformation of red sandstone was analyzed.The results show that before peak strength,the spatial AE events are not active and distribute stochastically in the specimen,while after peak strength,the spatial AE events are very active and focus on a local region beyond final microscopic failure plane.During multi-stage triaxial deformation with five different confining pressures,the spatial AE distribution evolution in the red sandstone was obtained.The obtained spatial AE locations of red sandstone at the final confining pressure agree very well with the ultimate failure experimental mode.Finally,the influence of confining pressure on the spatial AE evolution characteristics of red sandstone during triaxial deformation was discussed.The AE behavior of red sandstone during multi-stage triaxial deformation is interpreted in the light of the Kaiser effect,which has a significant meaning for predicting the unstable failure of engineering rock mass.
文摘Grid-connected current control is one.of the important control schemes in distributed generation systems.A lot of control methods have been developed,such as hysteresis control,dead-beat control,one-cycle control,etc.Hysteresis current control has the advantages of simplicity,robustness and good large-signal response.Unfortunately,the switching frequency of the converter using hysteresis current control varies according to the parameters of the bus voltage,the filter inductor and the bandwidth.Increasing the hysteresis bandwidth and the filter inductance can reduce the switching frequency.
基金supported by the National Natural Science Foundation of China(71690233,72001209)the Scientific Research Foundation of the National University of Defense Technology(ZK19-16)。
文摘Equipment development planning(EDP)is usually a long-term process often performed in an environment with high uncertainty.The traditional multi-stage dynamic programming cannot cope with this kind of uncertainty with unpredictable situations.To deal with this problem,a multi-stage EDP model based on a deep reinforcement learning(DRL)algorithm is proposed to respond quickly to any environmental changes within a reasonable range.Firstly,the basic problem of multi-stage EDP is described,and a mathematical planning model is constructed.Then,for two kinds of uncertainties(future capabi lity requirements and the amount of investment in each stage),a corresponding DRL framework is designed to define the environment,state,action,and reward function for multi-stage EDP.After that,the dueling deep Q-network(Dueling DQN)algorithm is used to solve the multi-stage EDP to generate an approximately optimal multi-stage equipment development scheme.Finally,a case of ten kinds of equipment in 100 possible environments,which are randomly generated,is used to test the feasibility and effectiveness of the proposed models.The results show that the algorithm can respond instantaneously in any state of the multistage EDP environment and unlike traditional algorithms,the algorithm does not need to re-optimize the problem for any change in the environment.In addition,the algorithm can flexibly adjust at subsequent planning stages in the event of a change to the equipment capability requirements to adapt to the new requirements.
基金Project(51005258) supported by the National Natural Science Foundation of ChinaProject(CDJZR12130065) supported by the Fundamental Research Funds for the Central Universities,China
文摘Although multi-stage incremental sheet forming has always been adopted instead of single-stage forming to form parts with a steep wall angle or to achieve a high forming performance, it is largely dependent on empirical designs. In order to research multi-stage forming further, the effect of forming stages(n) and angle interval between the two adjacent stages(Δα) on thickness distribution was investigated. Firstly, a finite element method(FEM) model of multi-stage incremental forming was established and experimentally verified. Then, based on the proposed simulation model, different strategies were adopted to form a frustum of cone with wall angle of 30° to research the thickness distribution of multi-pass forming. It is proved that the minimum thickness increases largely and the variance of sheet thickness decreases significantly as the value of n grows. Further, with the increase of Δα, the minimum thickness increases initially and then decreases, and the optimal thickness distribution is achieved with Δα of 10°.Additionally, a formula is deduced to estimate the sheet thickness after multi-stage forming and proved to be effective. And the simulation results fit well with the experimental results.
基金Project(07E1007) supported by the Youth Innovation Foundation for Petroleum Science and Technology of China National Petroleum CorportationProject(2006AA09Z357) supported by the National High Technology Research and Development of China
文摘The yield stress of waxy crude oil is a fundamental parameter in the calculation of pipelining technique and analysis of flow safety for the heated oil transported through pipeline.Daqing crude oil was studied and the variation of yield stress with shear history was explored through simulation experiment of pipelining.It is found that the effect of throughput variation or shear rate on yield stress is not obvious.With the decrease of final dynamic cooling temperature,the yield stress of waxy crude oil decreases,but there exists a little increase at the beginning.The prediction model of yield stress for waxy crude oil under the condition of shutdown is developed and it can be used to predict the yield stress of Daqing crude oil at certain heating temperature,final dynamic cooling temperature and measurement temperature.For the 139 groups of yield stress data of Daqing crude oil from the simulation experiment of pipelining,the result of prediction with this model shows that the average relative deviation between the yield stress measured and predicted is 30.27%,and the coefficient of correlation is 0.962 3.
文摘The Neoproterozoic Riviera W-REE-Mo deposit is one of the largest unmined tungsten resources in the world and is associated with pervasively altered A-type granites of the Neoproterozoic Cape Granite Suite Western Cape, South Africa. The present study investigated the mineral chemistry of scheelite, the principal ore mineral with the aim to record the variation of solid solution molybdenum for geometallurgical purposes and also as an indicator of changing redox conditions of the mineralizing hydrothermal fluids. Methodology included UV-fluorescence studies and micro-analyses by LA-ICP-MS. Results have shown that at least four phases of scheelite are hosted by the endoskarn zone, potassic alteration zone and various quartz-carbonate veins. This reflects hydrothermal fluid evolution from early stage reduced to late stage, vein associated and more oxidized. The molybdenum content of the dominant early phase scheelite is low and renders the deposit amenable to low penalty mineral recovery.
