In this paper,a new technique is introduced to construct higher-order iterative methods for solving nonlinear systems.The order of convergence of some iterative methods can be improved by three at the cost of introduc...In this paper,a new technique is introduced to construct higher-order iterative methods for solving nonlinear systems.The order of convergence of some iterative methods can be improved by three at the cost of introducing only one additional evaluation of the function in each step.Furthermore,some new efficient methods with a higher-order of convergence are obtained by using only a single matrix inversion in each iteration.Analyses of convergence properties and computational efficiency of these new methods are made and testified by several numerical problems.By comparison,the new schemes are more efficient than the corresponding existing ones,particularly for large problem sizes.展开更多
Linear minimum mean square error(MMSE)detection has been shown to achieve near-optimal performance for massive multiple-input multiple-output(MIMO)systems but inevitably involves complicated matrix inversion,which ent...Linear minimum mean square error(MMSE)detection has been shown to achieve near-optimal performance for massive multiple-input multiple-output(MIMO)systems but inevitably involves complicated matrix inversion,which entails high complexity.To avoid the exact matrix inversion,a considerable number of implicit and explicit approximate matrix inversion based detection methods is proposed.By combining the advantages of both the explicit and the implicit matrix inversion,this paper introduces a new low-complexity signal detection algorithm.Firstly,the relationship between implicit and explicit techniques is analyzed.Then,an enhanced Newton iteration method is introduced to realize an approximate MMSE detection for massive MIMO uplink systems.The proposed improved Newton iteration significantly reduces the complexity of conventional Newton iteration.However,its complexity is still high for higher iterations.Thus,it is applied only for first two iterations.For subsequent iterations,we propose a novel trace iterative method(TIM)based low-complexity algorithm,which has significantly lower complexity than higher Newton iterations.Convergence guarantees of the proposed detector are also provided.Numerical simulations verify that the proposed detector exhibits significant performance enhancement over recently reported iterative detectors and achieves close-to-MMSE performance while retaining the low-complexity advantage for systems with hundreds of antennas.展开更多
Mining operation, especially underground coal mining, always has the remarkable risks of ground control. Passive seismic velocity tomography based on simultaneous iterative reconstructive technique （SIRT） inversion ...Mining operation, especially underground coal mining, always has the remarkable risks of ground control. Passive seismic velocity tomography based on simultaneous iterative reconstructive technique （SIRT） inversion is used to deduce the stress redistribution around the longwall mining panel. The mining-induced microseismic events were recorded by mounting an array of receivers on the surface, above the active panel. After processing and filtering the seismic data, the three-dimensional tomography images of the p-wave velocity variations by SIRT passive seismic velocity tomography were provided. To display the velocity changes on coal seam level and subsequently to infer the stress redistribution, these three-dimensional tomograms into the coal seam level were sliced. In addition, the boundary element method （BEM） was used to simulate the stress redistribution. The results show that the inferred stresses from the passive seismic tomograms are conformed to numerical models and theoretical concept of the stress redistribution around the longwall panel. In velocity tomograms, the main zones of the stress redistribution arotmd the panel, including front and side abutment pressures, and gob stress are obvious and also the movement of stress zones along the face advancement is evident. Moreover, the effect of the advance rate of the face on the stress redistribution is demonstrated in tomography images. The research result proves that the SIRT passive seismic velocity tomography has an ultimate potential for monitoring the changes of stress redistribution around the longwall mining panel continuously and subsequently to improve safety of mining operations.展开更多
An iterative learning control algorithm based on shifted Legendre orthogonal polynomials is proposed to address the terminal control problem of linear time-varying systems. First, the method parameterizes a linear tim...An iterative learning control algorithm based on shifted Legendre orthogonal polynomials is proposed to address the terminal control problem of linear time-varying systems. First, the method parameterizes a linear time-varying system by using shifted Legendre polynomials approximation. Then, an approximated model for the linear time-varying system is deduced by employing the orthogonality relations and boundary values of shifted Legendre polynomials. Based on the model, the shifted Legendre polynomials coefficients of control function are iteratively adjusted by an optimal iterative learning law derived. The algorithm presented can avoid solving the state transfer matrix of linear time-varying systems. Simulation results illustrate the effectiveness of the proposed method.展开更多
Cross iteration often exists in the computational process of the simulation models, especially for control models. There is a credibility defect tracing problem in the validation of models with cross iteration. In ord...Cross iteration often exists in the computational process of the simulation models, especially for control models. There is a credibility defect tracing problem in the validation of models with cross iteration. In order to resolve this problem, after the problem formulation, a validation theorem on the cross iteration is proposed, and the proof of the theorem is given under the cross iteration circumstance. Meanwhile, applying the proposed theorem, the credibility calculation algorithm is provided, and the solvent of the defect tracing is explained. Further, based on the validation theorem on the cross iteration, a validation method for simulation models with the cross iteration is proposed, which is illustrated by a flowchart step by step. Finally, a validation example of a sixdegree of freedom (DOF) flight vehicle model is provided, and the validation process is performed by using the validation method. The result analysis shows that the method is effective to obtain the credibility of the model and accomplish the defect tracing of the validation.展开更多
为设计高效稳定的演化算法,将方程求根的不动点迭代思想引入到优化领域,通过将演化算法的寻优过程看作为在迭代框架下方程不动点的逐步显示化过程,设计出一种基于数学模型的演化新算法,即不动点演化算法(fixed point evolution algorith...为设计高效稳定的演化算法,将方程求根的不动点迭代思想引入到优化领域,通过将演化算法的寻优过程看作为在迭代框架下方程不动点的逐步显示化过程,设计出一种基于数学模型的演化新算法,即不动点演化算法(fixed point evolution algorithm,FPEA).该算法的繁殖算子是由Aitken加速的不动点迭代模型导出的二次多项式,其整体框架继承传统演化算法(如差分演化算法)基于种群的迭代模式.试验结果表明:在基准函数集CEC2014、CEC2019上,本文算法的最优值平均排名在所有比较算法中排名第1;在4个工程约束设计问题上,FPEA与CSA、GPE等多个算法相比,能以较少的计算开销获得最高的求解精度.展开更多
研究了复杂微细导线电容矩阵提取边界元法(boundary element method,BEM)的边界离散问题以及增强计算精度和数值稳定性的有效措施,分析了开阔边界尺寸、开阔边界离散、导线离散对计算精度的影响以及伪解、矩阵奇异性问题,提出了基于导...研究了复杂微细导线电容矩阵提取边界元法(boundary element method,BEM)的边界离散问题以及增强计算精度和数值稳定性的有效措施,分析了开阔边界尺寸、开阔边界离散、导线离散对计算精度的影响以及伪解、矩阵奇异性问题,提出了基于导线离散迭代和开阔边界迭代两阶段自动迭代边界元算法(automatic iterative boundary element method,AIBEM),并结合实例阐述了全域法和区域分解法两种多层介质问题系数矩阵生成方法。研究结果表明,边界环内生成的系数矩阵存在误差均衡协调问题,对复杂模型需合理选择各线段离散单元数及开阔边界尺寸,通过AIBEM可以获得经济的离散参数,有效避免矩阵奇异性,并提高收敛稳定性。将计算结果与有限元法、解析法、传输线法、矩量法进行了对比分析,证实了算法的可靠性。展开更多
基金Supported by the National Natural Science Foundation of China(12061048)NSF of Jiangxi Province(20232BAB201026,20232BAB201018)。
文摘In this paper,a new technique is introduced to construct higher-order iterative methods for solving nonlinear systems.The order of convergence of some iterative methods can be improved by three at the cost of introducing only one additional evaluation of the function in each step.Furthermore,some new efficient methods with a higher-order of convergence are obtained by using only a single matrix inversion in each iteration.Analyses of convergence properties and computational efficiency of these new methods are made and testified by several numerical problems.By comparison,the new schemes are more efficient than the corresponding existing ones,particularly for large problem sizes.
基金supported by National Natural Science Foundation of China(62371225,62371227)。
文摘Linear minimum mean square error(MMSE)detection has been shown to achieve near-optimal performance for massive multiple-input multiple-output(MIMO)systems but inevitably involves complicated matrix inversion,which entails high complexity.To avoid the exact matrix inversion,a considerable number of implicit and explicit approximate matrix inversion based detection methods is proposed.By combining the advantages of both the explicit and the implicit matrix inversion,this paper introduces a new low-complexity signal detection algorithm.Firstly,the relationship between implicit and explicit techniques is analyzed.Then,an enhanced Newton iteration method is introduced to realize an approximate MMSE detection for massive MIMO uplink systems.The proposed improved Newton iteration significantly reduces the complexity of conventional Newton iteration.However,its complexity is still high for higher iterations.Thus,it is applied only for first two iterations.For subsequent iterations,we propose a novel trace iterative method(TIM)based low-complexity algorithm,which has significantly lower complexity than higher Newton iterations.Convergence guarantees of the proposed detector are also provided.Numerical simulations verify that the proposed detector exhibits significant performance enhancement over recently reported iterative detectors and achieves close-to-MMSE performance while retaining the low-complexity advantage for systems with hundreds of antennas.
文摘Mining operation, especially underground coal mining, always has the remarkable risks of ground control. Passive seismic velocity tomography based on simultaneous iterative reconstructive technique （SIRT） inversion is used to deduce the stress redistribution around the longwall mining panel. The mining-induced microseismic events were recorded by mounting an array of receivers on the surface, above the active panel. After processing and filtering the seismic data, the three-dimensional tomography images of the p-wave velocity variations by SIRT passive seismic velocity tomography were provided. To display the velocity changes on coal seam level and subsequently to infer the stress redistribution, these three-dimensional tomograms into the coal seam level were sliced. In addition, the boundary element method （BEM） was used to simulate the stress redistribution. The results show that the inferred stresses from the passive seismic tomograms are conformed to numerical models and theoretical concept of the stress redistribution around the longwall panel. In velocity tomograms, the main zones of the stress redistribution arotmd the panel, including front and side abutment pressures, and gob stress are obvious and also the movement of stress zones along the face advancement is evident. Moreover, the effect of the advance rate of the face on the stress redistribution is demonstrated in tomography images. The research result proves that the SIRT passive seismic velocity tomography has an ultimate potential for monitoring the changes of stress redistribution around the longwall mining panel continuously and subsequently to improve safety of mining operations.
基金Supported by National Natural Science Foundation of P. R. China (60474049)
文摘An iterative learning control algorithm based on shifted Legendre orthogonal polynomials is proposed to address the terminal control problem of linear time-varying systems. First, the method parameterizes a linear time-varying system by using shifted Legendre polynomials approximation. Then, an approximated model for the linear time-varying system is deduced by employing the orthogonality relations and boundary values of shifted Legendre polynomials. Based on the model, the shifted Legendre polynomials coefficients of control function are iteratively adjusted by an optimal iterative learning law derived. The algorithm presented can avoid solving the state transfer matrix of linear time-varying systems. Simulation results illustrate the effectiveness of the proposed method.
基金supported by the National Natural Science Foundation of China(61374164)
文摘Cross iteration often exists in the computational process of the simulation models, especially for control models. There is a credibility defect tracing problem in the validation of models with cross iteration. In order to resolve this problem, after the problem formulation, a validation theorem on the cross iteration is proposed, and the proof of the theorem is given under the cross iteration circumstance. Meanwhile, applying the proposed theorem, the credibility calculation algorithm is provided, and the solvent of the defect tracing is explained. Further, based on the validation theorem on the cross iteration, a validation method for simulation models with the cross iteration is proposed, which is illustrated by a flowchart step by step. Finally, a validation example of a sixdegree of freedom (DOF) flight vehicle model is provided, and the validation process is performed by using the validation method. The result analysis shows that the method is effective to obtain the credibility of the model and accomplish the defect tracing of the validation.
文摘为设计高效稳定的演化算法,将方程求根的不动点迭代思想引入到优化领域,通过将演化算法的寻优过程看作为在迭代框架下方程不动点的逐步显示化过程,设计出一种基于数学模型的演化新算法,即不动点演化算法(fixed point evolution algorithm,FPEA).该算法的繁殖算子是由Aitken加速的不动点迭代模型导出的二次多项式,其整体框架继承传统演化算法(如差分演化算法)基于种群的迭代模式.试验结果表明:在基准函数集CEC2014、CEC2019上,本文算法的最优值平均排名在所有比较算法中排名第1;在4个工程约束设计问题上,FPEA与CSA、GPE等多个算法相比,能以较少的计算开销获得最高的求解精度.
文摘研究了复杂微细导线电容矩阵提取边界元法(boundary element method,BEM)的边界离散问题以及增强计算精度和数值稳定性的有效措施,分析了开阔边界尺寸、开阔边界离散、导线离散对计算精度的影响以及伪解、矩阵奇异性问题,提出了基于导线离散迭代和开阔边界迭代两阶段自动迭代边界元算法(automatic iterative boundary element method,AIBEM),并结合实例阐述了全域法和区域分解法两种多层介质问题系数矩阵生成方法。研究结果表明,边界环内生成的系数矩阵存在误差均衡协调问题,对复杂模型需合理选择各线段离散单元数及开阔边界尺寸,通过AIBEM可以获得经济的离散参数,有效避免矩阵奇异性,并提高收敛稳定性。将计算结果与有限元法、解析法、传输线法、矩量法进行了对比分析,证实了算法的可靠性。
