In this work,100 nm gate-length InP-based high electron mobility transistors(HEMTs)with a composite InGaAs/InAs/InGaAs channel are fabricated.DC measurements indicate that the InAs channel enhances transconductance bu...In this work,100 nm gate-length InP-based high electron mobility transistors(HEMTs)with a composite InGaAs/InAs/InGaAs channel are fabricated.DC measurements indicate that the InAs channel enhances transconductance but shifts the peak point toward lower V_(gs) under high V_(ds) bias.Peak separation analysis reveals the DC transconductance curve is composed of two components:the gate-controlled transconductance and the impact-ionization-induced additional transconductance.Further analysis demonstrates that the anomalous shift originates from the channel impact ionization intensity variation,which is caused by changes in the gate-drain electric field rather than the carrier density in the channel.Two additional current sources are introduced in the small-signal model to characterize the impact-ionization-induced transconductance,and the numerical variation trends of their parameters are consistent with the peak separation results,which validate the mechanism's correctness.RF measurements confirm that the DC transconductance enhancement does not effectively improve RF characteristics,which is attributed to the ionization-induced transconductance having a time constant significantly larger than that of conventional transconductance components.These findings provide a theoretical foundation for controlling the impact-ionization.展开更多
This paper focused on the modeling of microbial fermentation processes under varying production environments and proposed a novel approach.Considering that the dynamic characteristics of microorganisms differ across g...This paper focused on the modeling of microbial fermentation processes under varying production environments and proposed a novel approach.Considering that the dynamic characteristics of microorganisms differ across growth stages,we introduced the concept of multi-stage sensitivity analysis,in which each stage was investigated separately.The fuzzy C-means(FCM)algorithm was employed to cluster process data under nominal conditions,thereby dividing the penicillin fermentation process into distinct growth stages.Based on this division,the Latin hypercube sampling with partial rank correlation coefficient(LHS-EPRCC)method was applied to conduct sensitivity analysis for each stage,identifying an importance parameter set(IPS)that corresponds to the stage-specific growth characteristics.Re-estimation and correction of the IPS were then performed to enhance the predictive accuracy of the model.In a penicillin fermentation process deviating from nominal conditions,the proposed method was applied for model correction.Simulation results demonstrate that the corrected model aligns well with the actual process,thereby verifying the effectiveness of the proposed multistage sensitivity analysis approach in addressing complex fermentation processes and environmental uncertainties.展开更多
In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis...In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.展开更多
Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging f...Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging from 278.15 K to 318.15 K.The solubility in each system was found to be positively correlated with temperature.Furthermore,solubility data were analyzed using four equations:the modified Apelblat equation,Van’t Hoff equation,λh equation and CNIBS/R-K equations,and they provided satisfactory results for both two systems.The average root-mean-square deviation(105RMSD)values for these models were less than 13.93.Calculations utilizing the Van’t Hoff equation and Gibbs equations facilitated the derivation of apparent thermodynamic properties of NTO dissolution in the two systems,including values for Gibbs free energy,enthalpy and entropy.The%ζ_(H)is larger than%ζ_(TS),and all the%ζ_(H)data are≥58.63%,indicating that the enthalpy make a greater contribution than entropy to theΔG_(soln)^(Θ).展开更多
Architecture framework has become an effective method recently to describe the system of systems(SoS)architecture,such as the United States(US)Department of Defense Architecture Framework Version 2.0(DoDAF2.0).As a vi...Architecture framework has become an effective method recently to describe the system of systems(SoS)architecture,such as the United States(US)Department of Defense Architecture Framework Version 2.0(DoDAF2.0).As a viewpoint in DoDAF2.0,the operational viewpoint(OV)describes operational activities,nodes,and resource flows.The OV models are important for SoS architecture development.However,as the SoS complexity increases,constructing OV models with traditional methods exposes shortcomings,such as inefficient data collection and low modeling standards.Therefore,we propose an intelligent modeling method for five OV models,including operational resource flow OV-2,organizational relationships OV-4,operational activity hierarchy OV-5a,operational activities model OV-5b,and operational activity sequences OV-6c.The main idea of the method is to extract OV architecture data from text and generate interoperable OV models.First,we construct the OV meta model based on the DoDAF2.0 meta model(DM2).Second,OV architecture named entities is recognized from text based on the bidirectional long short-term memory and conditional random field(BiLSTM-CRF)model.And OV architecture relationships are collected with relationship extraction rules.Finally,we define the generation rules for OV models and develop an OV modeling tool.We use unmanned surface vehicles(USV)swarm target defense SoS architecture as a case to verify the feasibility and effectiveness of the intelligent modeling method.展开更多
The undrained mechanical behavior of unsaturated completely weathered granite(CWG)is highly susceptible to alterations in the hydraulic environment,particularly under uniaxial loading conditions,due to the unique natu...The undrained mechanical behavior of unsaturated completely weathered granite(CWG)is highly susceptible to alterations in the hydraulic environment,particularly under uniaxial loading conditions,due to the unique nature of this soil type.In this study,a series of unconfined compression tests were carried out on unsaturated CWG soil in an underground engineering site,and the effects of varying the environmental variables on the main undrained mechanical properties were analyzed.Based on the experimental results,a novel constitutive model was then established using the damage mechanics theory and the undetermined coefficient method.The results demonstrate that the curves of remolded CWG specimens with different moisture contents and dry densities exhibited diverse characteristics,including brittleness,significant softening,and ductility.As a typical indicator,the unconfined compression strength of soil specimens initially increased with an increase in moisture content and then decreased.Meanwhile,an optimal moisture content of approximately 10.5%could be observed,while a critical moisture content value of 13.0%was identified,beyond which the strength of the specimen decreases sharply.Moreover,the deformation and fracture of CWG specimens were predominantly caused by shear failure,and the ultimate failure modes were primarily influenced by moisture content rather than dry density.Furthermore,by comparing several similar models and the experimental data,the proposed model could accurately replicate the undrained mechanical characteristics of unsaturated CWG soil,and quantitatively describe the key mechanical indexes.These findings offer a valuable reference point for understanding the underlying mechanisms,anticipating potential risks,and implementing effective control measures in similar underground engineering projects.展开更多
In this paper,the small-signal modeling of the Indium Phosphide High Electron Mobility Transistor(InP HEMT)based on the Transformer neural network model is investigated.The AC S-parameters of the HEMT device are train...In this paper,the small-signal modeling of the Indium Phosphide High Electron Mobility Transistor(InP HEMT)based on the Transformer neural network model is investigated.The AC S-parameters of the HEMT device are trained and validated using the Transformer model.In the proposed model,the eight-layer transformer encoders are connected in series and the encoder layer of each Transformer consists of the multi-head attention layer and the feed-forward neural network layer.The experimental results show that the measured and modeled S-parameters of the HEMT device match well in the frequency range of 0.5-40 GHz,with the errors versus frequency less than 1%.Compared with other models,good accuracy can be achieved to verify the effectiveness of the proposed model.展开更多
This study introduces a comprehensive theoretical framework for accurately calculating the electronic band-structure of strained long-wavelength InAs/GaSb type-Ⅱsuperlattices.Utilizing an eight-band k·p Hamilto⁃...This study introduces a comprehensive theoretical framework for accurately calculating the electronic band-structure of strained long-wavelength InAs/GaSb type-Ⅱsuperlattices.Utilizing an eight-band k·p Hamilto⁃nian in conjunction with a scattering matrix method,the model effectively incorporates quantum confinement,strain effects,and interface states.This robust and numerically stable approach achieves exceptional agreement with experimental data,offering a reliable tool for analyzing and engineering the band structure of complex multi⁃layer systems.展开更多
The creep deformation and mechanical properties of 2219 aluminum alloy were experimentally investigated under both tension and compression at the temperature of 165℃for different time.The results indicated that the c...The creep deformation and mechanical properties of 2219 aluminum alloy were experimentally investigated under both tension and compression at the temperature of 165℃for different time.The results indicated that the creep deformation under tensile stress was greater than that under compressive stress.As the stress level increases,the compressive creep rate showed more significant increase.The yield strength after compressive stress creep-ageing was higher than that after stress-free ageing,with the lowest strength observed in the tensile-aged sample.Overall,the average phase length after compressive stress creep-ageing was larger than after tensile stress ageing.Under tensile stress,the number and size of precipitates at small angles to the stress direction were larger than those perpendicular to the stress direction.In contrast,under compressive stress,this relationship was reversed,and the preferential orientation of phases became more pronounced with ageing time.A unified,physics-based creep-ageing constitutive model,accounting for the orientation of precipitation,was developed for both tensile and compressive stress conditions.The predicted results were in good agreement with the experimental data.These findings,along with the developed model,provide a theoretical and simulation basis for precise creep-ageing forming of components under complex stresses.展开更多
The pressure comfort of passengers and crew in high-speed trains faces significant challenges under alternating open-tunnel conditions.To better understand the mechanism of pressure transmission and control interior p...The pressure comfort of passengers and crew in high-speed trains faces significant challenges under alternating open-tunnel conditions.To better understand the mechanism of pressure transmission and control interior pressure fluctuations in high-altitude regions,this study develops an interior pressure fluctuation model.By establishing the frameworks of the non-ideal gas state equation and the polytropic process equation,gas heat transfer and mass transfer were expressed through the first law of thermodynamics and the continuity equation.Simulation results,evaluated by root mean square error,coefficient of determination,peak-to-peak error,and pressure change rate,show that the proposed model closely aligns with measured signals in both overall trends and local details.Data from various train types and tunnel scenarios further demonstrate the model's accuracy and practical applicability.This study provides a critical foundation for evaluating interior pressure comfort for high-speed trains in high-altitude regions.展开更多
The precise characterization of hypersonic glide vehicle(HGV) maneuver laws in complex flight scenarios still faces challenges. Non-stationary changes in flight state due to abrupt changes in maneuver modes place high...The precise characterization of hypersonic glide vehicle(HGV) maneuver laws in complex flight scenarios still faces challenges. Non-stationary changes in flight state due to abrupt changes in maneuver modes place high demands on the accuracy of modeling methods. To address this issue, a novel maneuver laws modeling and analysis method based on higher order multi-resolution dynamic mode decomposition(HMDMD) is proposed in this work. A joint time-space-frequency decomposition of the vehicle's state sequence in the complex flight scenario is achieved with the higher order Koopman assumption and standard multi-resolution dynamic mode decomposition, and an approximate dynamic model is established. The maneuver laws can be reconstructed and analyzed with extracted multi-scale spatiotemporal modes with clear physical meaning. Based on the dynamic model of HGV, two flight scenarios are established with constant angle of attack and complex maneuver laws, respectively. Simulation results demonstrate that the maneuver laws obtained using the HMDMD method are highly consistent with those derived from the real dynamic model, the modeling accuracy is better than other common modeling methods, and the method has strong interpretability.展开更多
In this paper,a feature selection method for determining input parameters in antenna modeling is proposed.In antenna modeling,the input feature of artificial neural network(ANN)is geometric parameters.The selection cr...In this paper,a feature selection method for determining input parameters in antenna modeling is proposed.In antenna modeling,the input feature of artificial neural network(ANN)is geometric parameters.The selection criteria contain correlation and sensitivity between the geometric parameter and the electromagnetic(EM)response.Maximal information coefficient(MIC),an exploratory data mining tool,is introduced to evaluate both linear and nonlinear correlations.The EM response range is utilized to evaluate the sensitivity.The wide response range corresponding to varying values of a parameter implies the parameter is highly sensitive and the narrow response range suggests the parameter is insensitive.Only the parameter which is highly correlative and sensitive is selected as the input of ANN,and the sampling space of the model is highly reduced.The modeling of a wideband and circularly polarized antenna is studied as an example to verify the effectiveness of the proposed method.The number of input parameters decreases from8 to 4.The testing errors of|S_(11)|and axis ratio are reduced by8.74%and 8.95%,respectively,compared with the ANN with no feature selection.展开更多
Multi-agent systems often require good interoperability in the process of completing their assigned tasks.This paper first models the static structure and dynamic behavior of multiagent systems based on layered weight...Multi-agent systems often require good interoperability in the process of completing their assigned tasks.This paper first models the static structure and dynamic behavior of multiagent systems based on layered weighted scale-free community network and susceptible-infected-recovered(SIR)model.To solve the problem of difficulty in describing the changes in the structure and collaboration mode of the system under external factors,a two-dimensional Monte Carlo method and an improved dynamic Bayesian network are used to simulate the impact of external environmental factors on multi-agent systems.A collaborative information flow path optimization algorithm for agents under environmental factors is designed based on the Dijkstra algorithm.A method for evaluating system interoperability is designed based on simulation experiments,providing reference for the construction planning and optimization of organizational application of the system.Finally,the feasibility of the method is verified through case studies.展开更多
Process of dynamic recrystallization(DRX)plays a crucial role in altering the microstructure and enhancing the mechanical characteristics of CrNiMoVW steel.However,its initiation mechanism,deformation conditions,and p...Process of dynamic recrystallization(DRX)plays a crucial role in altering the microstructure and enhancing the mechanical characteristics of CrNiMoVW steel.However,its initiation mechanism,deformation conditions,and predictive models remain insufficiently understood,requiring further research to optimize the processing technology.In the present study,hot compression experiments were carried out on 30CrNiMoVW steel under deformation conditions with temperatures ranging from 950 to 1,250℃and strain rates from 0.001 to 1 s~(-1),during which true stress-strain curves were obtained.Based on friction and temperature corrections applied to these curves,a constitutive equation for 30CrNiMoVW steel was established,and its accuracy was verified through fitting analysis.Simultaneously,the study identified limitations in the initial volume fraction model,prompting the development of a modified recrystallization volume fraction model that was validated via correlation analysis between experimental data and model predictions.Furthermore,building upon the modified recrystallization volume fraction model,a novel recrystallization rate model was developed,and three characteristic strain points were determined.These points segmented the rate curve into three stages:a slow initiation stage(0,ε1),a rapid growth stage(1,ε3),and a slow equilibrium stage(e3,0.9).Notably,the value ofε3 was considered the most economical,ensuring the formation of fine and uniform grains during production while optimizing the process,reducing energy consumption and costs,and enhancing overall material performance.Finally,based on the physical constitutive relationships and kinetic models,a multiscale simulation approach combining the finite element method(FEM)and cellular automata(CA)was employed to predict the microstructural evolution of 30CrNiMoVW steel.The simulation results demonstrate that the FEM&CA approach can accurately reproduce the dynamic recrystallization behavior and microstructural evolution observed experimentally.This work provides critical guidance for the development of forging processes for 30CrNiMoVW steel.展开更多
基金Supported by the National Natural Science Foundation of China(62474195)。
文摘In this work,100 nm gate-length InP-based high electron mobility transistors(HEMTs)with a composite InGaAs/InAs/InGaAs channel are fabricated.DC measurements indicate that the InAs channel enhances transconductance but shifts the peak point toward lower V_(gs) under high V_(ds) bias.Peak separation analysis reveals the DC transconductance curve is composed of two components:the gate-controlled transconductance and the impact-ionization-induced additional transconductance.Further analysis demonstrates that the anomalous shift originates from the channel impact ionization intensity variation,which is caused by changes in the gate-drain electric field rather than the carrier density in the channel.Two additional current sources are introduced in the small-signal model to characterize the impact-ionization-induced transconductance,and the numerical variation trends of their parameters are consistent with the peak separation results,which validate the mechanism's correctness.RF measurements confirm that the DC transconductance enhancement does not effectively improve RF characteristics,which is attributed to the ionization-induced transconductance having a time constant significantly larger than that of conventional transconductance components.These findings provide a theoretical foundation for controlling the impact-ionization.
基金National Natural Science Foundation of China(62471204,62473175,62403215,61833007)Natural Science Foundation of Jiangsu Province(BK20241607,BE2023022-2)Research start-up fund for high-level talent(928201/186)。
文摘This paper focused on the modeling of microbial fermentation processes under varying production environments and proposed a novel approach.Considering that the dynamic characteristics of microorganisms differ across growth stages,we introduced the concept of multi-stage sensitivity analysis,in which each stage was investigated separately.The fuzzy C-means(FCM)algorithm was employed to cluster process data under nominal conditions,thereby dividing the penicillin fermentation process into distinct growth stages.Based on this division,the Latin hypercube sampling with partial rank correlation coefficient(LHS-EPRCC)method was applied to conduct sensitivity analysis for each stage,identifying an importance parameter set(IPS)that corresponds to the stage-specific growth characteristics.Re-estimation and correction of the IPS were then performed to enhance the predictive accuracy of the model.In a penicillin fermentation process deviating from nominal conditions,the proposed method was applied for model correction.Simulation results demonstrate that the corrected model aligns well with the actual process,thereby verifying the effectiveness of the proposed multistage sensitivity analysis approach in addressing complex fermentation processes and environmental uncertainties.
文摘In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.
文摘Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging from 278.15 K to 318.15 K.The solubility in each system was found to be positively correlated with temperature.Furthermore,solubility data were analyzed using four equations:the modified Apelblat equation,Van’t Hoff equation,λh equation and CNIBS/R-K equations,and they provided satisfactory results for both two systems.The average root-mean-square deviation(105RMSD)values for these models were less than 13.93.Calculations utilizing the Van’t Hoff equation and Gibbs equations facilitated the derivation of apparent thermodynamic properties of NTO dissolution in the two systems,including values for Gibbs free energy,enthalpy and entropy.The%ζ_(H)is larger than%ζ_(TS),and all the%ζ_(H)data are≥58.63%,indicating that the enthalpy make a greater contribution than entropy to theΔG_(soln)^(Θ).
基金National Natural Science Foundation of China(71690233,71971213,71901214)。
文摘Architecture framework has become an effective method recently to describe the system of systems(SoS)architecture,such as the United States(US)Department of Defense Architecture Framework Version 2.0(DoDAF2.0).As a viewpoint in DoDAF2.0,the operational viewpoint(OV)describes operational activities,nodes,and resource flows.The OV models are important for SoS architecture development.However,as the SoS complexity increases,constructing OV models with traditional methods exposes shortcomings,such as inefficient data collection and low modeling standards.Therefore,we propose an intelligent modeling method for five OV models,including operational resource flow OV-2,organizational relationships OV-4,operational activity hierarchy OV-5a,operational activities model OV-5b,and operational activity sequences OV-6c.The main idea of the method is to extract OV architecture data from text and generate interoperable OV models.First,we construct the OV meta model based on the DoDAF2.0 meta model(DM2).Second,OV architecture named entities is recognized from text based on the bidirectional long short-term memory and conditional random field(BiLSTM-CRF)model.And OV architecture relationships are collected with relationship extraction rules.Finally,we define the generation rules for OV models and develop an OV modeling tool.We use unmanned surface vehicles(USV)swarm target defense SoS architecture as a case to verify the feasibility and effectiveness of the intelligent modeling method.
基金Project(42202318)supported by the National Natural Science Foundation of ChinaProject(252300421199)supported by the Natural Science Foundation of Henan Province,ChinaProject(2024JJ6219)supported by the Hunan Provincial Natural Science Foundation of China。
文摘The undrained mechanical behavior of unsaturated completely weathered granite(CWG)is highly susceptible to alterations in the hydraulic environment,particularly under uniaxial loading conditions,due to the unique nature of this soil type.In this study,a series of unconfined compression tests were carried out on unsaturated CWG soil in an underground engineering site,and the effects of varying the environmental variables on the main undrained mechanical properties were analyzed.Based on the experimental results,a novel constitutive model was then established using the damage mechanics theory and the undetermined coefficient method.The results demonstrate that the curves of remolded CWG specimens with different moisture contents and dry densities exhibited diverse characteristics,including brittleness,significant softening,and ductility.As a typical indicator,the unconfined compression strength of soil specimens initially increased with an increase in moisture content and then decreased.Meanwhile,an optimal moisture content of approximately 10.5%could be observed,while a critical moisture content value of 13.0%was identified,beyond which the strength of the specimen decreases sharply.Moreover,the deformation and fracture of CWG specimens were predominantly caused by shear failure,and the ultimate failure modes were primarily influenced by moisture content rather than dry density.Furthermore,by comparing several similar models and the experimental data,the proposed model could accurately replicate the undrained mechanical characteristics of unsaturated CWG soil,and quantitatively describe the key mechanical indexes.These findings offer a valuable reference point for understanding the underlying mechanisms,anticipating potential risks,and implementing effective control measures in similar underground engineering projects.
基金Supported by the National Natural Science Foundation of China(62201293,62034003)the Open-Foundation of State Key Laboratory of Millimeter-Waves(K202313)the Jiangsu Province Youth Science and Technology Talent Support Project(JSTJ-2024-040)。
文摘In this paper,the small-signal modeling of the Indium Phosphide High Electron Mobility Transistor(InP HEMT)based on the Transformer neural network model is investigated.The AC S-parameters of the HEMT device are trained and validated using the Transformer model.In the proposed model,the eight-layer transformer encoders are connected in series and the encoder layer of each Transformer consists of the multi-head attention layer and the feed-forward neural network layer.The experimental results show that the measured and modeled S-parameters of the HEMT device match well in the frequency range of 0.5-40 GHz,with the errors versus frequency less than 1%.Compared with other models,good accuracy can be achieved to verify the effectiveness of the proposed model.
文摘This study introduces a comprehensive theoretical framework for accurately calculating the electronic band-structure of strained long-wavelength InAs/GaSb type-Ⅱsuperlattices.Utilizing an eight-band k·p Hamilto⁃nian in conjunction with a scattering matrix method,the model effectively incorporates quantum confinement,strain effects,and interface states.This robust and numerically stable approach achieves exceptional agreement with experimental data,offering a reliable tool for analyzing and engineering the band structure of complex multi⁃layer systems.
基金Project(JCKY2023205B003)supported by the Defense Industrial Technology Development Program,China。
文摘The creep deformation and mechanical properties of 2219 aluminum alloy were experimentally investigated under both tension and compression at the temperature of 165℃for different time.The results indicated that the creep deformation under tensile stress was greater than that under compressive stress.As the stress level increases,the compressive creep rate showed more significant increase.The yield strength after compressive stress creep-ageing was higher than that after stress-free ageing,with the lowest strength observed in the tensile-aged sample.Overall,the average phase length after compressive stress creep-ageing was larger than after tensile stress ageing.Under tensile stress,the number and size of precipitates at small angles to the stress direction were larger than those perpendicular to the stress direction.In contrast,under compressive stress,this relationship was reversed,and the preferential orientation of phases became more pronounced with ageing time.A unified,physics-based creep-ageing constitutive model,accounting for the orientation of precipitation,was developed for both tensile and compressive stress conditions.The predicted results were in good agreement with the experimental data.These findings,along with the developed model,provide a theoretical and simulation basis for precise creep-ageing forming of components under complex stresses.
基金Project(52372402)supported by the National Natural Science Foundation of China。
文摘The pressure comfort of passengers and crew in high-speed trains faces significant challenges under alternating open-tunnel conditions.To better understand the mechanism of pressure transmission and control interior pressure fluctuations in high-altitude regions,this study develops an interior pressure fluctuation model.By establishing the frameworks of the non-ideal gas state equation and the polytropic process equation,gas heat transfer and mass transfer were expressed through the first law of thermodynamics and the continuity equation.Simulation results,evaluated by root mean square error,coefficient of determination,peak-to-peak error,and pressure change rate,show that the proposed model closely aligns with measured signals in both overall trends and local details.Data from various train types and tunnel scenarios further demonstrate the model's accuracy and practical applicability.This study provides a critical foundation for evaluating interior pressure comfort for high-speed trains in high-altitude regions.
基金supported by the National Natural Science Foundation of China (Grant No. 12302056)the Postdoctoral Fellowship Program of CPSF:GZC20233445。
文摘The precise characterization of hypersonic glide vehicle(HGV) maneuver laws in complex flight scenarios still faces challenges. Non-stationary changes in flight state due to abrupt changes in maneuver modes place high demands on the accuracy of modeling methods. To address this issue, a novel maneuver laws modeling and analysis method based on higher order multi-resolution dynamic mode decomposition(HMDMD) is proposed in this work. A joint time-space-frequency decomposition of the vehicle's state sequence in the complex flight scenario is achieved with the higher order Koopman assumption and standard multi-resolution dynamic mode decomposition, and an approximate dynamic model is established. The maneuver laws can be reconstructed and analyzed with extracted multi-scale spatiotemporal modes with clear physical meaning. Based on the dynamic model of HGV, two flight scenarios are established with constant angle of attack and complex maneuver laws, respectively. Simulation results demonstrate that the maneuver laws obtained using the HMDMD method are highly consistent with those derived from the real dynamic model, the modeling accuracy is better than other common modeling methods, and the method has strong interpretability.
基金National Natural Science Foundation of China(62161048)Sichuan Science and Technology Program(2022NSFSC0547,2022ZYD0109)。
文摘In this paper,a feature selection method for determining input parameters in antenna modeling is proposed.In antenna modeling,the input feature of artificial neural network(ANN)is geometric parameters.The selection criteria contain correlation and sensitivity between the geometric parameter and the electromagnetic(EM)response.Maximal information coefficient(MIC),an exploratory data mining tool,is introduced to evaluate both linear and nonlinear correlations.The EM response range is utilized to evaluate the sensitivity.The wide response range corresponding to varying values of a parameter implies the parameter is highly sensitive and the narrow response range suggests the parameter is insensitive.Only the parameter which is highly correlative and sensitive is selected as the input of ANN,and the sampling space of the model is highly reduced.The modeling of a wideband and circularly polarized antenna is studied as an example to verify the effectiveness of the proposed method.The number of input parameters decreases from8 to 4.The testing errors of|S_(11)|and axis ratio are reduced by8.74%and 8.95%,respectively,compared with the ANN with no feature selection.
基金supported by the Key R&D Projects in Jiangsu Province(BE2021729)the Key Primary Research Project of Primary Strengthening Program(KYZYJKKCJC23001).
文摘Multi-agent systems often require good interoperability in the process of completing their assigned tasks.This paper first models the static structure and dynamic behavior of multiagent systems based on layered weighted scale-free community network and susceptible-infected-recovered(SIR)model.To solve the problem of difficulty in describing the changes in the structure and collaboration mode of the system under external factors,a two-dimensional Monte Carlo method and an improved dynamic Bayesian network are used to simulate the impact of external environmental factors on multi-agent systems.A collaborative information flow path optimization algorithm for agents under environmental factors is designed based on the Dijkstra algorithm.A method for evaluating system interoperability is designed based on simulation experiments,providing reference for the construction planning and optimization of organizational application of the system.Finally,the feasibility of the method is verified through case studies.
基金supported by the National Natural Science Foundation of China(52071012)the National Natural Science Foundation of China(Grant No.52101119)+5 种基金the Open Foundation of State Key Laboratory for Advanced Metals and Materials(2022-Z01)the Open Research Fund of National Key Laboratory of Advanced Casting Technologies(CAT2023-004)the Key Research and Development Program of Shandong Province(2022JMRH0209)Hebei Province Innovation Capability Enhancement Plan Project(No.244A7607D)the Beijing Municipal Natural Science Foundation(No.2214072)Young Elite Scientist Sponsorship Program by CAST(No.2021QNRC001)。
文摘Process of dynamic recrystallization(DRX)plays a crucial role in altering the microstructure and enhancing the mechanical characteristics of CrNiMoVW steel.However,its initiation mechanism,deformation conditions,and predictive models remain insufficiently understood,requiring further research to optimize the processing technology.In the present study,hot compression experiments were carried out on 30CrNiMoVW steel under deformation conditions with temperatures ranging from 950 to 1,250℃and strain rates from 0.001 to 1 s~(-1),during which true stress-strain curves were obtained.Based on friction and temperature corrections applied to these curves,a constitutive equation for 30CrNiMoVW steel was established,and its accuracy was verified through fitting analysis.Simultaneously,the study identified limitations in the initial volume fraction model,prompting the development of a modified recrystallization volume fraction model that was validated via correlation analysis between experimental data and model predictions.Furthermore,building upon the modified recrystallization volume fraction model,a novel recrystallization rate model was developed,and three characteristic strain points were determined.These points segmented the rate curve into three stages:a slow initiation stage(0,ε1),a rapid growth stage(1,ε3),and a slow equilibrium stage(e3,0.9).Notably,the value ofε3 was considered the most economical,ensuring the formation of fine and uniform grains during production while optimizing the process,reducing energy consumption and costs,and enhancing overall material performance.Finally,based on the physical constitutive relationships and kinetic models,a multiscale simulation approach combining the finite element method(FEM)and cellular automata(CA)was employed to predict the microstructural evolution of 30CrNiMoVW steel.The simulation results demonstrate that the FEM&CA approach can accurately reproduce the dynamic recrystallization behavior and microstructural evolution observed experimentally.This work provides critical guidance for the development of forging processes for 30CrNiMoVW steel.
