Three-dimensional(3D)micro-jet printing is a droplet deposition technique based on liquid-phase materials.To improve the deposition density and performance of energetic films with micro/nanoscale on an energetic chip,...Three-dimensional(3D)micro-jet printing is a droplet deposition technique based on liquid-phase materials.To improve the deposition density and performance of energetic films with micro/nanoscale on an energetic chip,polydopamine(PDA)was utilized as a linker bridge to induce the in-situ self-assembly of CL-20-based energetic film via 3D micro-jet printing.The self-assembly was extensively characterized by confocal laser scanning microscopy(CLSM),SEM,power-XRD,XPS,and DSC.The performance of the self-assembled film was verified by the mechanical properties and detonation properties,and a possible self-assembly mechanism in the layer-by-layer micro-jet printing process was proposed.The results indicated PDA-induced self-assembly enhanced the physical entanglement between the binders and energetic crystal,reduced the porosity from 15.87%to 11.28%,and improved the elastic modulus and the detonation performance of the CL-20-based energetic film.This work proposes a novel and promising energetic film design and fabrication strategy to enhance the interaction between the energetic composite layers in the micro-jet printing process.展开更多
In order to provide guideline for choosing a suitable tube-wall thickness(d)for the micro-jet methane diffusion flame,the effect of tube-wall thickness on the blow-off limit is investigated via numerical simulation in...In order to provide guideline for choosing a suitable tube-wall thickness(d)for the micro-jet methane diffusion flame,the effect of tube-wall thickness on the blow-off limit is investigated via numerical simulation in the present work.The results show that the blow-off limit of micro-jet methane diffusion flame firstly increases and then decreases with the increase of tube-wall thickness.Subsequently,the underlying mechanisms responsible for the above non-monotonic blow-off limit are discussed in terms of the flow filed,strain effect and conjugate heat exchange.The analysis indicates that the flow field is insignificant for the non-monotonic blow-off limit.A smaller strain effect can induce the increase of the blow-off limit fromd=0.1 to 0.2 mm,and a worse heat recirculation effect can induce the decrease of the blow-off limit fromd=0.2 to 0.4 mm.The non-monotonic blow-off limit is mainly determined by the heat loss of flame to the tube-wall and the performance of tube-wall on preheating unburned fuel.The smallest heat loss of flame to the tube-wall and the best performance of tube-wall on preheating unburned fuel result in the largest blow-off limit atd=0.2 mm.Therefore,a moderate tube-wall thickness is more suitable to manufacture the micro-jet burner.展开更多
文摘Three-dimensional(3D)micro-jet printing is a droplet deposition technique based on liquid-phase materials.To improve the deposition density and performance of energetic films with micro/nanoscale on an energetic chip,polydopamine(PDA)was utilized as a linker bridge to induce the in-situ self-assembly of CL-20-based energetic film via 3D micro-jet printing.The self-assembly was extensively characterized by confocal laser scanning microscopy(CLSM),SEM,power-XRD,XPS,and DSC.The performance of the self-assembled film was verified by the mechanical properties and detonation properties,and a possible self-assembly mechanism in the layer-by-layer micro-jet printing process was proposed.The results indicated PDA-induced self-assembly enhanced the physical entanglement between the binders and energetic crystal,reduced the porosity from 15.87%to 11.28%,and improved the elastic modulus and the detonation performance of the CL-20-based energetic film.This work proposes a novel and promising energetic film design and fabrication strategy to enhance the interaction between the energetic composite layers in the micro-jet printing process.
基金Project(51876074)supported by the National Natural Science Foundation of China。
文摘In order to provide guideline for choosing a suitable tube-wall thickness(d)for the micro-jet methane diffusion flame,the effect of tube-wall thickness on the blow-off limit is investigated via numerical simulation in the present work.The results show that the blow-off limit of micro-jet methane diffusion flame firstly increases and then decreases with the increase of tube-wall thickness.Subsequently,the underlying mechanisms responsible for the above non-monotonic blow-off limit are discussed in terms of the flow filed,strain effect and conjugate heat exchange.The analysis indicates that the flow field is insignificant for the non-monotonic blow-off limit.A smaller strain effect can induce the increase of the blow-off limit fromd=0.1 to 0.2 mm,and a worse heat recirculation effect can induce the decrease of the blow-off limit fromd=0.2 to 0.4 mm.The non-monotonic blow-off limit is mainly determined by the heat loss of flame to the tube-wall and the performance of tube-wall on preheating unburned fuel.The smallest heat loss of flame to the tube-wall and the best performance of tube-wall on preheating unburned fuel result in the largest blow-off limit atd=0.2 mm.Therefore,a moderate tube-wall thickness is more suitable to manufacture the micro-jet burner.
