Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the control...Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the controlling factors of reservoir development were analyzed,and the formation model of“intra-platform shoal thin-layer dolomite reservoir”was established.The Qixia Formation is a regressive cycle from bottom to top,in which the first member(Qi1 Member)develops low-energy open sea microfacies,and the second member(Qi2 Member)evolves into intra-platform shoal and inter-shoal sea with decreases in sea level.The intra-platform shoal is mainly distributed near the top of two secondary shallowing cycles of the Qi2 Member.The most important reservoir rock of the Qixia Formation is thin-layer fractured-vuggy dolomite,followed by vuggy dolomite.The semi-filled saddle dolomite is common in fracture-vug,and intercrystalline pores and residual dissolution pores combined with fractures to form the effective pore-fracture network.Based on the coupling analysis of sedimentary and diagenesis characteristics,the reservoir formation model of“pre-depositional micro-paleogeomorphology controlling shoal,sedimentary shoal controlling dolomite,penecontemporaneous dolomite benefiting preservation of pores,and late hydrothermal action effectively improving reservoir quality”was systematically established.The“first-order high zone”micro-paleogeomorphology before the deposition of the Qixia Formation controlled the development of large area of intra-platform shoals in Gaoshiti area during the deposition of the Qi2 Member.Shoal facies is the basic condition of early dolomitization,and the distribution range of intra-platform shoal and dolomite reservoir is highly consistent.The grain limestone of shoal facies is transformed by two stages of dolomitization.The penecontemporaneous dolomitization is conducive to the preservation of primary pores and secondary dissolved pores.The burial hydrothermal fluid enters the early dolomite body along the fractures associated with the Emeishan basalt event,makes it recrystallized into medium–coarse crystal dolomite.With the intercrystalline pores and the residual vugs after the hydrothermal dissolution along the fractures,the high-quality intra-platform shoal-type thin-layer dolomite reservoirs are formed.The establishment of this reservoir formation model can provide important theoretical support for the sustainable development of Permian gas reservoirs in the Sichuan Basin.展开更多
Based on 2D and 3D seismic data and well logging data,this paper studies the distribution of well-seismic stratigraphic filling and shoal controlled reservoirs of Upper Cambrian Xixiangchi Formation in the south slope...Based on 2D and 3D seismic data and well logging data,this paper studies the distribution of well-seismic stratigraphic filling and shoal controlled reservoirs of Upper Cambrian Xixiangchi Formation in the south slope of Leshan-Longnüsi paleouplift in the Sichuan Basin,to reveal the genetic relationship between stratigraphic filling,paleogeomorphology and large-scale grain shoal.(1)The Xixiangchi Formation in the study area is overlapped and filled gradually to the Leshan-Longnüsi paleouplift,but gets thin sharply due to truncation only near the denudation pinch-out line of the paleouplift.Two overlap slope break belts and one erosion slope break belt are identified,and the Xixiangchi Formation is divided into 4 members from bottom to top.(2)The filling pattern of the overlapping at the base and erosion at the top indicates that the thickness of Xixiangchi Formation can reflect the pre-depositional paleogeomorphology,and reveals that the studied area has a monoclinal geomorphic feature of plunging to southeast and being controlled by multistage slope break belts.(3)The large-scale grain shoals and shoal controlled reservoirs are developed longitudinally in the third and fourth members of the Xixiangchi Formation,and laterally in the vicinity of the multistage overlap slope break belts.(4)Overlap slope break belts are closely related to northwest trending reverse faults.The western margin of the South China Plate converging with the Qiangtang-Himalaya massif in the middle-late Cambrian resulted in the rapid uplift of the northwestern margin of the Yangtze Plate and expanding toward southeast,leaving gradually plunging multistage slope breaks and large-scale northeast grain shoal reservoir belts.Considering oil and gas test results,it is predicted that the favorable exploration zone of the grain shoal controlled reservoirs covers an area of 3340 km^(2).展开更多
The oolitic shoal reservoirs of the Lower Triassic Feixianguan Formation carbonates in the Sichuan Basin of southwest China are an important target for gas exploration in the basin.Their occurrence,like other cases wo...The oolitic shoal reservoirs of the Lower Triassic Feixianguan Formation carbonates in the Sichuan Basin of southwest China are an important target for gas exploration in the basin.Their occurrence,like other cases worldwide,can be divided into two locations in general,i.e.,platform interior and platform margin locations.Their differences of reservoir features and origins,however,have not been investigated comprehensively due to different exploration degrees.This issue is addressed in this paper,to provide basic data and information for the basin＇s hydrocarbon exploration and for the study of carbonate platform sedimentology and reservoir geology worldwide.We compared the features of these two types of reservoirs in detail,including the depositional and diagenetic features,pore types and petrophysical features.Based on the comparison,the origin of the reservoirs was further discussed.It is shown that the reservoirs in platform interior and platform margin locations differ significantly.The interior carbonates were deposited in moderate to high energy settings and the dominant lithologic type was limestone,which was weakly compacted and intensely cemented and has undergone meteoric dissolution.Pore types include intragranular dissolution and moldic pores,with low porosities（6%） and low permeabilities（0.1 mD）.By contrast,the platform margin carbonates were deposited in relatively high energy settings and mainly consisted of dolostones with some limestones.The rocks were strongly compacted but incompletely cemented.As a result,some primary intergranular pores were preserved.Both meteoric solution and burial solution have taken place.There are various types of pore spaces including intergranular and intercrystalline solution pores and residual intergranular pores.This type of reservoir generally has better petrophysical properties（9% porosity and 0.1 mD permeability） and pore-throat structures than the interior reservoirs.These differences were influenced by both primary depositional features and secondary diagenesis.For the interior carbonate reservoirs,early meteoric dissolution,weak compaction and strong cementation are important controlling factors.By contrast,the factors controlling the formation of the margin carbonate reservoirs mainly include dolomitization,preservation of primary pores and burial dissolution.展开更多
Core, well logging and seismic data were used to investigate sandbody architectural characteristics within Lower Member of Minghuazhen Formation in Neogene, Bohai BZ25 Oilfield, and to analyze the sedimentary microfac...Core, well logging and seismic data were used to investigate sandbody architectural characteristics within Lower Member of Minghuazhen Formation in Neogene, Bohai BZ25 Oilfield, and to analyze the sedimentary microfacies, distribution and internal architecture characteristics of the bar finger within shoal water delta front. The branched sand body within shoal water delta front is the bar finger, consisting of the mouth bar, distributary channel over bar, and levee. The distributary channel cuts through the mouth bar, and the thin levee covers the mouth bar which is located at both sides of distributary channel. The bar finger is commonly sinuous and its sinuosity increases basinward. The distributary channel changes from deeply incising the mouth bar to shallowly incising top of the mouth bar.The aspect ratio ranges from 25 to 50 and there is a double logarithmic linear positive relationship between the width and thickness for the bar finger, which is controlled by base-level changing in study area. For the bar finger, injection and production in the same distributary channel should be avoided during water flooding development. In addition, middle–upper distributary channel and undrilled mouth bar are focus of tapping remaining oil.展开更多
Based on the core, cast thin section, whole rock analysis, conventional physical properties and high pressure mercury intrusion test, the sedimentary diagenesis characteristics of rudist shoal in Cretaceous Mishrif Fo...Based on the core, cast thin section, whole rock analysis, conventional physical properties and high pressure mercury intrusion test, the sedimentary diagenesis characteristics of rudist shoal in Cretaceous Mishrif Formation of H Oilfield, Iraq and its control on the reservoir were studied. The rudist shoal of the Mishrif Formation develops in the high-stand systems tract and is distributed in the high places of paleogeomorphology on the edge of platform with strong hydrodynamic force. According to the relative sea level changes, lithologic evolution and sedimentary structure characteristics of the rudist shoal, the single rudist shoal is divided into four lithologic sections: A, B, C and D, that is, low-angle cross-bedding pelletoids-rudist packstone, low-angle cross-bedding and parallel bedding arene-rudist grainstone, parallel bedding rudist gravel limestone, and horizontal bedding carbonaceous mudstone. The complete sedimentary sequence of a single rudist shoal is often disrupted. Several rudist shoals superimpose to form thick rudist shoal sediment. The single rudist shoal thickness and lithologic sections assemblage change regularly in vertical direction. The rudist shoal has the characteristics of "strong dissolution, weak cementation and strong compaction", forming pore-type reservoir with intergranular pores, intergranular dissolved pores, mold pores, and dissolved pores. With mainly coarse pore throats larger than 5 μm, the reservoir is of medium-high porosity and high permeability. There is lithological reverse cycles inside single shoals and between single shoals, with content of mud crystals decreasing from the bottom to the top, dissolution increasing, cementation decreasing in strength, pore throats getting larger, and physical properties turning better. The rudist shoal of MB2-1 at the top of the high-stand systems tract has the largest thickness, moreover, subject to the strongest atmospheric freshwater leaching, this layer has the most significant dissolution and the largest pore throat, so it is the best reservoir of the Mishrif Formation.展开更多
Based on seismic, drilling data and experimental analysis, the characteristics and main controlling factors of shoal dolomite gas reservoir in the third member of Ordovician Yingshan Formation of Gucheng area, Tarim b...Based on seismic, drilling data and experimental analysis, the characteristics and main controlling factors of shoal dolomite gas reservoir in the third member of Ordovician Yingshan Formation of Gucheng area, Tarim basin were examined.The study shows that the dolomite gas reservoir in Gucheng area is lithologic gas reservoir controlled by shoal and fault jointly,and its formation is mainly attributed to the following factors:(1) The continuously developing paleotectonic structure has been in the direction of gas migration and accumulation;(2) The large area of medium-high energy grain bank deposited in gentle slope environment is the material basis for the formation of dolomite reservoir;(3) Atmospheric water leaching and dolomitization and fluid dissolution in fault zone are the key factors for the formation of high-quality dolomite reservoir;(4)The natural gas comes from cracking of the ancient oil reservoir and hydrocarbon generation of dispersed organic matter in source rocks, and the NNE-trending strike-slip fault is the dominant channel for vertical migration of natural gas;(5) Limestone cap rocks in the first and second members of Yingshan Formation provide direct sealing for the formation of gas reservoir there. On the basis of comprehensive analysis, it is pointed out that the Gucheng area has three grain shoal zones in the third member of Yingshan Formation in nearly S-N direction, which together with seven strike-slip fault zones in NNE direction control the development of shoal dolomite gas reservoir.展开更多
Based on the comprehensive analysis of core, thin section, logging and seismic data, this study carried out the identification and comparison of Permian Changxing Formation sequences, clarified the typical sedimentary...Based on the comprehensive analysis of core, thin section, logging and seismic data, this study carried out the identification and comparison of Permian Changxing Formation sequences, clarified the typical sedimentary architectures of intra-platform shoal, investigated the vertical and horizontal development and distribution of intra-platform shoal in each sequence, and thus established the sedimentary evolution model of shoal body. The study results are reflected in four aspects.First, there are two complete third-order sequences(SQ1 and SQ2) in Changxing Formation in central Sichuan Basin. SQ1 is generally thick in the north and thin in the south, and SQ2 shows a thickness differentiation trend of “two thicknesses and three thinnesses”. Second, the Changxing Formation in central Sichuan Basin mainly develops intra-platform shoal, inter-shoal sea and intra-platform depression subfacies. In the vertical direction, the intra-platform shoal mainly presents two typical sedimentary sequences: stable superposed and high-frequency interbedded. Third, the stable superimposed sedimentary sequence is developed in the shoal belt at the edge of intra-platform depression, which is composed of two shoal-forming periods and located in the highstand systems tracts(HSTs) of SQ1 and SQ2. The high-frequency interbedded sedimentary sequence is developed in the southern shoal belt of intra-platform depression, which is composed of four shoal-forming periods and mainly located in the HST of SQ2. Fourth, during the SQ1 deposition, the intra-platform shoal was mainly developed at the edge of the intra-platform depression on the north side of the study area, and the inter-shoal sea subfacies was mainly developed on the south side. During the SQ2 deposition, the intra-platform shoal was widely developed in the area, forming two nearly parallel intra-platform shoal belts. The study results provide direction and ideas for exploration of Changxing Formation intra-platform shoal reservoirs in central Sichuan Basin.展开更多
This study presents a simplified analytical model for predicting the structural responses of double-bottom ships in a shoal grounding scenario. This solution is based on a series of analytical models developed from el...This study presents a simplified analytical model for predicting the structural responses of double-bottom ships in a shoal grounding scenario. This solution is based on a series of analytical models developed from elastic-plastic mechanism theories for different structural components, including bottom girders, floors, bottom plating, and attached stiffeners. We verify this simplified analytical model by numerical simulation, and establish finite element models for a typical tanker hold and a rigid indenter representing seabed obstacles. Employing the LS-DYNA finite element solver, we conduct numerical simulations for shoal-grounding cases with a wide range of slope angles and indentation depths. In comparison with numerical simulations, we verify the proposed simplified analytical model with respect to the total energy dissipation and the horizontal grounding resistance. We also investigate the interaction effect of deformation patterns between bottom structure components. Our results show that the total energy dissipation and resistances predicted by the analytical model agree well with those from numerical simulations.展开更多
基金Supported by the National Natural Science Foundation of China(42172177)CNPC Scientific Research and Technological Development Project(2021DJ05)PetroChina-Southwest University of Petroleum Innovation Consortium Project(2020CX020000).
文摘Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the controlling factors of reservoir development were analyzed,and the formation model of“intra-platform shoal thin-layer dolomite reservoir”was established.The Qixia Formation is a regressive cycle from bottom to top,in which the first member(Qi1 Member)develops low-energy open sea microfacies,and the second member(Qi2 Member)evolves into intra-platform shoal and inter-shoal sea with decreases in sea level.The intra-platform shoal is mainly distributed near the top of two secondary shallowing cycles of the Qi2 Member.The most important reservoir rock of the Qixia Formation is thin-layer fractured-vuggy dolomite,followed by vuggy dolomite.The semi-filled saddle dolomite is common in fracture-vug,and intercrystalline pores and residual dissolution pores combined with fractures to form the effective pore-fracture network.Based on the coupling analysis of sedimentary and diagenesis characteristics,the reservoir formation model of“pre-depositional micro-paleogeomorphology controlling shoal,sedimentary shoal controlling dolomite,penecontemporaneous dolomite benefiting preservation of pores,and late hydrothermal action effectively improving reservoir quality”was systematically established.The“first-order high zone”micro-paleogeomorphology before the deposition of the Qixia Formation controlled the development of large area of intra-platform shoals in Gaoshiti area during the deposition of the Qi2 Member.Shoal facies is the basic condition of early dolomitization,and the distribution range of intra-platform shoal and dolomite reservoir is highly consistent.The grain limestone of shoal facies is transformed by two stages of dolomitization.The penecontemporaneous dolomitization is conducive to the preservation of primary pores and secondary dissolved pores.The burial hydrothermal fluid enters the early dolomite body along the fractures associated with the Emeishan basalt event,makes it recrystallized into medium–coarse crystal dolomite.With the intercrystalline pores and the residual vugs after the hydrothermal dissolution along the fractures,the high-quality intra-platform shoal-type thin-layer dolomite reservoirs are formed.The establishment of this reservoir formation model can provide important theoretical support for the sustainable development of Permian gas reservoirs in the Sichuan Basin.
基金Supported by the Cooperation Project of China National Natural Science Foundation and Petro China(U23B20154)Science and Technology Cooperation Project of Petro China and Southwest Petroleum University(2020CX010000)。
文摘Based on 2D and 3D seismic data and well logging data,this paper studies the distribution of well-seismic stratigraphic filling and shoal controlled reservoirs of Upper Cambrian Xixiangchi Formation in the south slope of Leshan-Longnüsi paleouplift in the Sichuan Basin,to reveal the genetic relationship between stratigraphic filling,paleogeomorphology and large-scale grain shoal.(1)The Xixiangchi Formation in the study area is overlapped and filled gradually to the Leshan-Longnüsi paleouplift,but gets thin sharply due to truncation only near the denudation pinch-out line of the paleouplift.Two overlap slope break belts and one erosion slope break belt are identified,and the Xixiangchi Formation is divided into 4 members from bottom to top.(2)The filling pattern of the overlapping at the base and erosion at the top indicates that the thickness of Xixiangchi Formation can reflect the pre-depositional paleogeomorphology,and reveals that the studied area has a monoclinal geomorphic feature of plunging to southeast and being controlled by multistage slope break belts.(3)The large-scale grain shoals and shoal controlled reservoirs are developed longitudinally in the third and fourth members of the Xixiangchi Formation,and laterally in the vicinity of the multistage overlap slope break belts.(4)Overlap slope break belts are closely related to northwest trending reverse faults.The western margin of the South China Plate converging with the Qiangtang-Himalaya massif in the middle-late Cambrian resulted in the rapid uplift of the northwestern margin of the Yangtze Plate and expanding toward southeast,leaving gradually plunging multistage slope breaks and large-scale northeast grain shoal reservoir belts.Considering oil and gas test results,it is predicted that the favorable exploration zone of the grain shoal controlled reservoirs covers an area of 3340 km^(2).
基金funded by the National Basic Research Development Program(973 project, Grant No. 2012CB214803)PetroChina Youth Innovation Foundation (Grant No. 2011D-5006-0105)Key Subject Construction Project of Sichuan Province, China(Grant No. SZD 0414)
文摘The oolitic shoal reservoirs of the Lower Triassic Feixianguan Formation carbonates in the Sichuan Basin of southwest China are an important target for gas exploration in the basin.Their occurrence,like other cases worldwide,can be divided into two locations in general,i.e.,platform interior and platform margin locations.Their differences of reservoir features and origins,however,have not been investigated comprehensively due to different exploration degrees.This issue is addressed in this paper,to provide basic data and information for the basin＇s hydrocarbon exploration and for the study of carbonate platform sedimentology and reservoir geology worldwide.We compared the features of these two types of reservoirs in detail,including the depositional and diagenetic features,pore types and petrophysical features.Based on the comparison,the origin of the reservoirs was further discussed.It is shown that the reservoirs in platform interior and platform margin locations differ significantly.The interior carbonates were deposited in moderate to high energy settings and the dominant lithologic type was limestone,which was weakly compacted and intensely cemented and has undergone meteoric dissolution.Pore types include intragranular dissolution and moldic pores,with low porosities（6%） and low permeabilities（0.1 mD）.By contrast,the platform margin carbonates were deposited in relatively high energy settings and mainly consisted of dolostones with some limestones.The rocks were strongly compacted but incompletely cemented.As a result,some primary intergranular pores were preserved.Both meteoric solution and burial solution have taken place.There are various types of pore spaces including intergranular and intercrystalline solution pores and residual intergranular pores.This type of reservoir generally has better petrophysical properties（9% porosity and 0.1 mD permeability） and pore-throat structures than the interior reservoirs.These differences were influenced by both primary depositional features and secondary diagenesis.For the interior carbonate reservoirs,early meteoric dissolution,weak compaction and strong cementation are important controlling factors.By contrast,the factors controlling the formation of the margin carbonate reservoirs mainly include dolomitization,preservation of primary pores and burial dissolution.
基金Supported by the National Natural Science Foundation of China(41772101)China National Science and Technology Major Project(2017ZX05009001-002)
文摘Core, well logging and seismic data were used to investigate sandbody architectural characteristics within Lower Member of Minghuazhen Formation in Neogene, Bohai BZ25 Oilfield, and to analyze the sedimentary microfacies, distribution and internal architecture characteristics of the bar finger within shoal water delta front. The branched sand body within shoal water delta front is the bar finger, consisting of the mouth bar, distributary channel over bar, and levee. The distributary channel cuts through the mouth bar, and the thin levee covers the mouth bar which is located at both sides of distributary channel. The bar finger is commonly sinuous and its sinuosity increases basinward. The distributary channel changes from deeply incising the mouth bar to shallowly incising top of the mouth bar.The aspect ratio ranges from 25 to 50 and there is a double logarithmic linear positive relationship between the width and thickness for the bar finger, which is controlled by base-level changing in study area. For the bar finger, injection and production in the same distributary channel should be avoided during water flooding development. In addition, middle–upper distributary channel and undrilled mouth bar are focus of tapping remaining oil.
基金Supported by the China National Science and Technology Major Project(2017ZX05030-001)
文摘Based on the core, cast thin section, whole rock analysis, conventional physical properties and high pressure mercury intrusion test, the sedimentary diagenesis characteristics of rudist shoal in Cretaceous Mishrif Formation of H Oilfield, Iraq and its control on the reservoir were studied. The rudist shoal of the Mishrif Formation develops in the high-stand systems tract and is distributed in the high places of paleogeomorphology on the edge of platform with strong hydrodynamic force. According to the relative sea level changes, lithologic evolution and sedimentary structure characteristics of the rudist shoal, the single rudist shoal is divided into four lithologic sections: A, B, C and D, that is, low-angle cross-bedding pelletoids-rudist packstone, low-angle cross-bedding and parallel bedding arene-rudist grainstone, parallel bedding rudist gravel limestone, and horizontal bedding carbonaceous mudstone. The complete sedimentary sequence of a single rudist shoal is often disrupted. Several rudist shoals superimpose to form thick rudist shoal sediment. The single rudist shoal thickness and lithologic sections assemblage change regularly in vertical direction. The rudist shoal has the characteristics of "strong dissolution, weak cementation and strong compaction", forming pore-type reservoir with intergranular pores, intergranular dissolved pores, mold pores, and dissolved pores. With mainly coarse pore throats larger than 5 μm, the reservoir is of medium-high porosity and high permeability. There is lithological reverse cycles inside single shoals and between single shoals, with content of mud crystals decreasing from the bottom to the top, dissolution increasing, cementation decreasing in strength, pore throats getting larger, and physical properties turning better. The rudist shoal of MB2-1 at the top of the high-stand systems tract has the largest thickness, moreover, subject to the strongest atmospheric freshwater leaching, this layer has the most significant dissolution and the largest pore throat, so it is the best reservoir of the Mishrif Formation.
基金Supported by the National Natural Science Foundation of China(Grant No.U20A201009 and 41972157)PetroChina Science and Technology Major Project(Grant No.2016E-0204)。
文摘Based on seismic, drilling data and experimental analysis, the characteristics and main controlling factors of shoal dolomite gas reservoir in the third member of Ordovician Yingshan Formation of Gucheng area, Tarim basin were examined.The study shows that the dolomite gas reservoir in Gucheng area is lithologic gas reservoir controlled by shoal and fault jointly,and its formation is mainly attributed to the following factors:(1) The continuously developing paleotectonic structure has been in the direction of gas migration and accumulation;(2) The large area of medium-high energy grain bank deposited in gentle slope environment is the material basis for the formation of dolomite reservoir;(3) Atmospheric water leaching and dolomitization and fluid dissolution in fault zone are the key factors for the formation of high-quality dolomite reservoir;(4)The natural gas comes from cracking of the ancient oil reservoir and hydrocarbon generation of dispersed organic matter in source rocks, and the NNE-trending strike-slip fault is the dominant channel for vertical migration of natural gas;(5) Limestone cap rocks in the first and second members of Yingshan Formation provide direct sealing for the formation of gas reservoir there. On the basis of comprehensive analysis, it is pointed out that the Gucheng area has three grain shoal zones in the third member of Yingshan Formation in nearly S-N direction, which together with seven strike-slip fault zones in NNE direction control the development of shoal dolomite gas reservoir.
基金Supported by the PetroChina-Southwest Petroleum University Innovation Consortium Technology Cooperation Project (2020CX010000)。
文摘Based on the comprehensive analysis of core, thin section, logging and seismic data, this study carried out the identification and comparison of Permian Changxing Formation sequences, clarified the typical sedimentary architectures of intra-platform shoal, investigated the vertical and horizontal development and distribution of intra-platform shoal in each sequence, and thus established the sedimentary evolution model of shoal body. The study results are reflected in four aspects.First, there are two complete third-order sequences(SQ1 and SQ2) in Changxing Formation in central Sichuan Basin. SQ1 is generally thick in the north and thin in the south, and SQ2 shows a thickness differentiation trend of “two thicknesses and three thinnesses”. Second, the Changxing Formation in central Sichuan Basin mainly develops intra-platform shoal, inter-shoal sea and intra-platform depression subfacies. In the vertical direction, the intra-platform shoal mainly presents two typical sedimentary sequences: stable superposed and high-frequency interbedded. Third, the stable superimposed sedimentary sequence is developed in the shoal belt at the edge of intra-platform depression, which is composed of two shoal-forming periods and located in the highstand systems tracts(HSTs) of SQ1 and SQ2. The high-frequency interbedded sedimentary sequence is developed in the southern shoal belt of intra-platform depression, which is composed of four shoal-forming periods and mainly located in the HST of SQ2. Fourth, during the SQ1 deposition, the intra-platform shoal was mainly developed at the edge of the intra-platform depression on the north side of the study area, and the inter-shoal sea subfacies was mainly developed on the south side. During the SQ2 deposition, the intra-platform shoal was widely developed in the area, forming two nearly parallel intra-platform shoal belts. The study results provide direction and ideas for exploration of Changxing Formation intra-platform shoal reservoirs in central Sichuan Basin.
基金financially supported by the National Natural Science Fundation of China(Grant No.51239007)
文摘This study presents a simplified analytical model for predicting the structural responses of double-bottom ships in a shoal grounding scenario. This solution is based on a series of analytical models developed from elastic-plastic mechanism theories for different structural components, including bottom girders, floors, bottom plating, and attached stiffeners. We verify this simplified analytical model by numerical simulation, and establish finite element models for a typical tanker hold and a rigid indenter representing seabed obstacles. Employing the LS-DYNA finite element solver, we conduct numerical simulations for shoal-grounding cases with a wide range of slope angles and indentation depths. In comparison with numerical simulations, we verify the proposed simplified analytical model with respect to the total energy dissipation and the horizontal grounding resistance. We also investigate the interaction effect of deformation patterns between bottom structure components. Our results show that the total energy dissipation and resistances predicted by the analytical model agree well with those from numerical simulations.
