In this paper, we analytically explore the magnetic field and mass density evolutions obtained in particle-in-cell（PIC）and magnetohydrodynamics（MHD） simulations of a rarefied deuterium shell Z-pinch and compare th...In this paper, we analytically explore the magnetic field and mass density evolutions obtained in particle-in-cell（PIC）and magnetohydrodynamics（MHD） simulations of a rarefied deuterium shell Z-pinch and compare those results, and also we study the effects of artificially increased Spitzer resistivity on the magnetic field evolution and Z-pinch dynamic process in the MHD simulation. There are significant differences between the profiles of mass density in the PIC and MHD simulations before 45 ns of the Z-pinch in this study. However, after the shock formation in the PIC simulation,the mass density profile is similar to that in the MHD simulation in the case of using multiplier 2 to modify the Spitzer resistivity. Compared with the magnetic field profiles of the PIC simulation of the shell, the magnetic field diffusion has still not been sufficiently revealed in the MHD simulation even though their convergence ratios become the same by using larger multipliers in the resistivity. The MHD simulation results suggest that the magnetic field diffusion is greatly enhanced by increasing the Spitzer resistivity used, which, however, causes the implosion characteristic to change from shock compression to weak shock, even shockless evolution, and expedites the expansion of the shell. Too large a multiplier is not suggested to be used to modify the resistivity in some Z-pinch applications, such as the Z-pinch driven inertial confinement fusion（ICF） in a dynamic hohlraum. Two-fluid or Hall MHD model, even the PIC/fluid hybrid simulation would be considered as a suitable physical model when there exist the plasma regions with very low density in the simulated domain.展开更多
Hybrid nanofluids are remarkable functioning liquids that are intended to reduce the energy loss while maximizing the heat transmission.In the involvement of suction and nonlinear thermal radiation effects,this study ...Hybrid nanofluids are remarkable functioning liquids that are intended to reduce the energy loss while maximizing the heat transmission.In the involvement of suction and nonlinear thermal radiation effects,this study attempted to explore the energy transmission features of the inclined magnetohydrodynamic(MHD)stagnation flow of CNTs-hybrid nanofluid across the nonlinear permeable stretching or shrinking sheet.This work also included some noteworthy features like chemical reactions,variable molecular diffusivity,quadratic convection,viscous dissipation,velocity slip and heat omission assessment.Employing appropriate similarity components,the model equations were modified to ODEs and computed by using the HAM technique.The impact of various relevant flow characteristics on movement,heat and concentration profiles was investigated and plotted on a graph.Considering various model factors,the significance of drag friction,heat and mass transfer rate were also computed in tabular and graphical form.This leads to the conclusion that such factors have a considerable impact on the dynamics of fluid as well as other engineering measurements of interest.Furthermore,viscous forces are dominated by increasing the values ofλ_(p),δ_(m)andδ_(q),and as a result,F(ξ)accelerates while the opposite trend is observed for M andφ.The drag friction is boosted by the augmentation M,λ_(p)andφ,but the rate of heat transfer declined.According to our findings,hybrid nanoliquid effects dominate that of ordinary nanofluid in terms of F(ξ),Θ(ξ)andφ(ξ)profiles.The HAM and the numerical technique(shooting method)were found to be in good agreement.展开更多
Magnetohydrodynamic （MHD） pressure drop in the Chinese Dual Functional Liquid Lithium-lead Test Blanket Module （DFLL-TBM） proposed for ITER is discussed in this paper. Electrical insulation between the coolant cha...Magnetohydrodynamic （MHD） pressure drop in the Chinese Dual Functional Liquid Lithium-lead Test Blanket Module （DFLL-TBM） proposed for ITER is discussed in this paper. Electrical insulation between the coolant channel surfaces and the liquid metal is required to reduce the MHD pressure drop to a manageable level. Insulation can be provided by a thin insulating coating, such as Al2O3, which can also serve as a tritium barrier layer, at the channel surfaces in contact with LiPb. The coating＇s effectiveness for reducing the MHD pressure drop is analysed through three-dimensional numerical simulation. A MHD-based commercial computational fluid dynamic （CFD） software FLUENT is used to simulate the LiPb flow. The effect on the MHD pressure drop due to cracks or faults in the coating layer is also considered. The insulating performance requirement for the coating material in DFLL-TBM design is proposed according to the analysis.展开更多
In order to reveal the mechanism of MHD-assisted mixing, and analyse the major parameters which influence the effect of MHD-assisted mixing, experiments of MHD-assisted mixing are carried out with a non-premixed butan...In order to reveal the mechanism of MHD-assisted mixing, and analyse the major parameters which influence the effect of MHD-assisted mixing, experiments of MHD-assisted mixing are carried out with a non-premixed butane-air combustion system. The evolvement of the discharge section and the effect of MHD-assisted mixing on combustion are investigated by changing the magnetic flux density and airflow velocity. The results show that the discharge area not only bends but also rotates around the centered wire electrode, which are mainly caused by the Lorentz force. Moreover, the highest curvature occurs near the centered wire electrode.The discharge localizes near the surface of the wire electrode and annular electrode when there is no ponderomotive force. However, if the ponderomotive force is applied, the discharge happens between these two electrodes and it gradually shrinks with time. The discharge area cannot localize near the annular electrode, which is due to the increase of energy loss in the airflow.When the airflow velocity exceeds a certain value, the discharge section becomes unstable because the injected energy cannot maintain the discharge. The rotation motion of the discharge section could enlarge the contact surface between butane and air, and is therefore beneficial for mixing and combustion. Magnetic flux density and airflow velocity are critical parameters for MHD-assisted mixing.展开更多
基金Projected supported by the National Natural Science Foundation of China(Grant Nos.11675025,11135007,and 11405012)
文摘In this paper, we analytically explore the magnetic field and mass density evolutions obtained in particle-in-cell（PIC）and magnetohydrodynamics（MHD） simulations of a rarefied deuterium shell Z-pinch and compare those results, and also we study the effects of artificially increased Spitzer resistivity on the magnetic field evolution and Z-pinch dynamic process in the MHD simulation. There are significant differences between the profiles of mass density in the PIC and MHD simulations before 45 ns of the Z-pinch in this study. However, after the shock formation in the PIC simulation,the mass density profile is similar to that in the MHD simulation in the case of using multiplier 2 to modify the Spitzer resistivity. Compared with the magnetic field profiles of the PIC simulation of the shell, the magnetic field diffusion has still not been sufficiently revealed in the MHD simulation even though their convergence ratios become the same by using larger multipliers in the resistivity. The MHD simulation results suggest that the magnetic field diffusion is greatly enhanced by increasing the Spitzer resistivity used, which, however, causes the implosion characteristic to change from shock compression to weak shock, even shockless evolution, and expedites the expansion of the shell. Too large a multiplier is not suggested to be used to modify the resistivity in some Z-pinch applications, such as the Z-pinch driven inertial confinement fusion（ICF） in a dynamic hohlraum. Two-fluid or Hall MHD model, even the PIC/fluid hybrid simulation would be considered as a suitable physical model when there exist the plasma regions with very low density in the simulated domain.
基金funded by King Mongkut’s University of Technology North Bangkok with Contract no.KMUTNB-Post-65-07。
文摘Hybrid nanofluids are remarkable functioning liquids that are intended to reduce the energy loss while maximizing the heat transmission.In the involvement of suction and nonlinear thermal radiation effects,this study attempted to explore the energy transmission features of the inclined magnetohydrodynamic(MHD)stagnation flow of CNTs-hybrid nanofluid across the nonlinear permeable stretching or shrinking sheet.This work also included some noteworthy features like chemical reactions,variable molecular diffusivity,quadratic convection,viscous dissipation,velocity slip and heat omission assessment.Employing appropriate similarity components,the model equations were modified to ODEs and computed by using the HAM technique.The impact of various relevant flow characteristics on movement,heat and concentration profiles was investigated and plotted on a graph.Considering various model factors,the significance of drag friction,heat and mass transfer rate were also computed in tabular and graphical form.This leads to the conclusion that such factors have a considerable impact on the dynamics of fluid as well as other engineering measurements of interest.Furthermore,viscous forces are dominated by increasing the values ofλ_(p),δ_(m)andδ_(q),and as a result,F(ξ)accelerates while the opposite trend is observed for M andφ.The drag friction is boosted by the augmentation M,λ_(p)andφ,but the rate of heat transfer declined.According to our findings,hybrid nanoliquid effects dominate that of ordinary nanofluid in terms of F(ξ),Θ(ξ)andφ(ξ)profiles.The HAM and the numerical technique(shooting method)were found to be in good agreement.
基金Anhui Provincial Natural Science Foundation of China(No.070413085)Anhui Education Department Natural Science Foundation of China(No.2006KJ264)
文摘Magnetohydrodynamic （MHD） pressure drop in the Chinese Dual Functional Liquid Lithium-lead Test Blanket Module （DFLL-TBM） proposed for ITER is discussed in this paper. Electrical insulation between the coolant channel surfaces and the liquid metal is required to reduce the MHD pressure drop to a manageable level. Insulation can be provided by a thin insulating coating, such as Al2O3, which can also serve as a tritium barrier layer, at the channel surfaces in contact with LiPb. The coating＇s effectiveness for reducing the MHD pressure drop is analysed through three-dimensional numerical simulation. A MHD-based commercial computational fluid dynamic （CFD） software FLUENT is used to simulate the LiPb flow. The effect on the MHD pressure drop due to cracks or faults in the coating layer is also considered. The insulating performance requirement for the coating material in DFLL-TBM design is proposed according to the analysis.
基金supported by National Natural Science Foundation of China(No.11372352)the Mechanism Research on Near Electrode Thermal-Electromagnetic-Flow of High Temperature Supersonic MHD Generation(No.51306207)Natural Science Foundation of Shaanxi Province of China(No.2015JM5184)
文摘In order to reveal the mechanism of MHD-assisted mixing, and analyse the major parameters which influence the effect of MHD-assisted mixing, experiments of MHD-assisted mixing are carried out with a non-premixed butane-air combustion system. The evolvement of the discharge section and the effect of MHD-assisted mixing on combustion are investigated by changing the magnetic flux density and airflow velocity. The results show that the discharge area not only bends but also rotates around the centered wire electrode, which are mainly caused by the Lorentz force. Moreover, the highest curvature occurs near the centered wire electrode.The discharge localizes near the surface of the wire electrode and annular electrode when there is no ponderomotive force. However, if the ponderomotive force is applied, the discharge happens between these two electrodes and it gradually shrinks with time. The discharge area cannot localize near the annular electrode, which is due to the increase of energy loss in the airflow.When the airflow velocity exceeds a certain value, the discharge section becomes unstable because the injected energy cannot maintain the discharge. The rotation motion of the discharge section could enlarge the contact surface between butane and air, and is therefore beneficial for mixing and combustion. Magnetic flux density and airflow velocity are critical parameters for MHD-assisted mixing.
