T he residual stray magnetic fields present in ferromagnetic casting slabs were investigated in this work,which result from the magnetic fields generated during the steel casting process.Existing optical detection met...T he residual stray magnetic fields present in ferromagnetic casting slabs were investigated in this work,which result from the magnetic fields generated during the steel casting process.Existing optical detection methods face challenges owing to surface oxide scales,and conventional high-precision magnetic sensors are ineffective at high temperatures.To overcome these limitations,a small coil sensor was employed to measure the residual magnetism strength in oscillation traces,using metal magnetic memory and electromagnetic induction methods,which can carry out detection without an external excitation source.Using this technology,the proposed scheme successfully detects defects at high tempe-ratures(up to 670℃)without a cooling device.The key findings include the ability to detect both surface and near-surface defects,such as cracks and oscillation marks,with an enhanced signal-to-noise ratio(SNR)of 7.2 dB after signal processing.The method’s practicality was validated in a steel mill environment,where testing on casting slabs effectively detected defects,providing a foundation for improving industrial quality control.The proposed detection scheme offers a significant advancement in nondestructive testing(NDT)for high-temperature applications,contributing to more efficient and accurate monitoring of ferromagnetic material integrity.展开更多
Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully construct...Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.展开更多
Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining...Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.展开更多
Micro-and nano-to millimeter-scale magnetic matrix materials have gained widespread application due to their exceptional magnetic properties and favorable cost-effectiveness.With the rapid progress in condensed matter...Micro-and nano-to millimeter-scale magnetic matrix materials have gained widespread application due to their exceptional magnetic properties and favorable cost-effectiveness.With the rapid progress in condensed matter physics,materials science,and mineral separation technologies,these materials are now poised for new opportunities in theoretical research and development.This review provides a comprehensive analysis of these matrices,encompassing their structure,size,shape,composition,properties,and multifaceted applications.These materials,primarily composed of alloys of transition state metasl such as iron(Fe),cobalt(Co),titanium(Ti),and nickel(Ni),exhibit unique attributes like high magnetization rates,low eleastic modulus,and high saturation magnetic field strengths.Furthermore,the studies also delve into the complex mechanical interactions involved in the separation of magnetic particles using magnetic separator matrices,including magnetic,gravitational,centrifugal,and van der Waals forces.The review outlines how size and shape effects influence the magnetic behavior of matrices,offering new perspectives for innovative applications of magnetic matrices in various domains of materials science and magnetic separation.展开更多
A novel nitrogen-doped graphene(NG)supporting magnetic nanoparticles(Fe and Fe_(3)C)was synthesized from g-C_(3)N_(4)and Fe(C_(5)H_(5))_(2).When used as a photocatalyst exposed to visible light,the material was excell...A novel nitrogen-doped graphene(NG)supporting magnetic nanoparticles(Fe and Fe_(3)C)was synthesized from g-C_(3)N_(4)and Fe(C_(5)H_(5))_(2).When used as a photocatalyst exposed to visible light,the material was excellent in degrading tetracycline(TC)in aqueous solutions.Scanning electron microscopy indicated that it had a folded sheet structure,with numerous nanoparticles observed on graphene sheets.Raman spectroscopy confirmed the presence of significant defects in the material,which suppressed the recombination of photogenerated electron-hole pairs.The performance and degradation mechanism of the photocatalyst was verified using a series of optical and electrochemical experiments and theoretical calculations.The degradation efficiency of the catalyst for TC was as high as 97.1%in 120 min under visible light irradiation,which is superior to other reported catalysts.A mechanism study showed that TC is rapidly degraded into CO_(2),H_(2)O and other small inorganic molecules,with holes(h^(+))serving as the primary driving force.The catalyst had an outstanding stability and reusability,and could be easily recovered using an external magnetic field.展开更多
A trinuclear copper complex [Cu_(3)(L2)_(2)(SO_(4))_(2)(H_(2)O)_(7)]·8H_(2)O(1)(HL2=1-hydroxy-3-(pyrazin-2-yl)-N-(pyrazin-2-ylmethyl)imidazo[1,5-a]pyrazine-8-carboxamide) with a multi-substituted imidazo[1,5-a]py...A trinuclear copper complex [Cu_(3)(L2)_(2)(SO_(4))_(2)(H_(2)O)_(7)]·8H_(2)O(1)(HL2=1-hydroxy-3-(pyrazin-2-yl)-N-(pyrazin-2-ylmethyl)imidazo[1,5-a]pyrazine-8-carboxamide) with a multi-substituted imidazo[1,5-a]pyrazine scaffold was serendipitously prepared from the reaction of the pro-ligand of H_(2)L1(N,N'-bis(pyrazin-2-ylmethyl)pyrazine-2,3-dicarboxamide) with CuSO_(4)·5H_(2O) in aqueous solution at room temperature.Complex 1 was characterized by IR,single-crystal X-ray analysis,and magnetic susceptibility measurements.Single-crystal X-ray analysis reveals that the complex consists of three Cu(Ⅱ) ions,two in situ transformed L2~-ligands,two coordinated sulfates,seven coordinated water molecules,and eight uncoordinated water molecules.Magnetic susceptibility measurement indicates that there are obvious ferromagnetic coupling interactions between the adjacent Cu(Ⅱ) ions in 1.CCDC:1852713.展开更多
G-quadruplexes,which are unique nucleic acid secondary structures formed by the folding of guaninerich DNA or RNA,are closely related to essential biological activities.They exhibit extensive application prospects owi...G-quadruplexes,which are unique nucleic acid secondary structures formed by the folding of guaninerich DNA or RNA,are closely related to essential biological activities.They exhibit extensive application prospects owing to their abundant binding sites and distinct physicochemical properties.Therefore,G-quadruplexes have attracted widespread attention in recent decades.Nuclear magnetic resonance(NMR)technology is an ideal tool for characterizing molecular structures and plays a crucial role in exploring the self-assembly process of G-quadruplexes.In this article,we introduce the basic concepts of NMR,followed by reviewing the applications of NMR in G-quadruplexes.Finally,challenges and prospects of NMR technology in the field of G-quadruplex research are discussed.展开更多
A new cobalt(Ⅱ)-radical complex:[Co(im4-py)_(2)(PNB)_(2)](im4-py=2-(4'-pyridyl)-4,4,5,5-tetramethylimidazole-1-oxyl,HPNB=p-nitrobenzoic acid)has been synthesized and characterized by X-ray diffraction analysis,el...A new cobalt(Ⅱ)-radical complex:[Co(im4-py)_(2)(PNB)_(2)](im4-py=2-(4'-pyridyl)-4,4,5,5-tetramethylimidazole-1-oxyl,HPNB=p-nitrobenzoic acid)has been synthesized and characterized by X-ray diffraction analysis,elemental analysis,IR,and magnetic properties.X-ray diffraction analysis shows that the complex exists as mononuclear molecules and Co(Ⅱ)ion is four-coordinated with two radicals and two PNB-ligands.The magnetic susceptibility study indicates the complex exhibits weak ferromagnetic interactions between cobalt(Ⅱ)and im4-py radical.The magnetic property is explained by the magnetic and structure exchange mechanism.CCDC:976028.展开更多
Achieving the spin-exchange relaxation-free(SERF)state in atomic comagnetometers(ACMs)necessitates a stable and weak magnetic environment.This paper presents the design of a miniaturized permalloy magnetic shielding s...Achieving the spin-exchange relaxation-free(SERF)state in atomic comagnetometers(ACMs)necessitates a stable and weak magnetic environment.This paper presents the design of a miniaturized permalloy magnetic shielding spherical shell(MSSS)with minimal apertures,tailored to meet these requirements.By employing a combination of analytical solutions and finite element analysis(FEA),we achieved superior magnetic shielding while maintaining a compact form factor.The analytical solution for the shielding factor indicated that a four-layer permalloy sphere shell with optimized air gaps was necessary.A numerical analysis model of the MSSS was developed and validated using COMSOL software,confirming the suitability of the air gaps.The size,shape,and orientation of the openings in the perforated sphere shell were meticulously designed and optimized to minimize residual magnetism.The optimal structure was fabricated,resulting in triaxial shielding factors of 47619,52631,and 21739,meeting the anticipated requirements.A comparison of simulation results with experimental tests demonstrated the efficacy of the design methodology.This study has significant implications for ultrasensitive magnetic field detection devices requiring weak magnetic field environments,such as atomic gyroscopes,magnetometers,atomic interferometers,and atomic clocks.展开更多
Magnetic seeding agglomeration(MSA),i.e.,adding magnetic seeds and a low intensity pre-magnetization for fine agglomeration,was applied to the flotation of coal,pyrite and hematite ore slimes.Size analysis and flotati...Magnetic seeding agglomeration(MSA),i.e.,adding magnetic seeds and a low intensity pre-magnetization for fine agglomeration,was applied to the flotation of coal,pyrite and hematite ore slimes.Size analysis and flotation tests highlight that the MSA improved flotation recovery and kinetics of pyrite ore while causing some loss in selectivity,and in the presences of the polyacrylamide for coal and starch for hematite the agglomeration flotation was further strengthened due to the synergetic effect between the flocculants and magnetic seeds.Magnetism analyses and calculation confirmed the adsorption of magnetic seeds onto minerals,resulting in a decreased threshold magnetic field intensity for the MSA to happen.Then atomic force microscope(AFM)study found that there exists a long range force between magnetic seeds and minerals,which facilitates the adsorption of magnetic seeds on minerals.FTIR shows both the polyacrylamide and starch adsorbed onto minerals and magnetic seeds,thus acting as the bridging media between minerals and magnetic seeds,intensifying the agglomeration in flotation.Surface characterization of the MSA was understood by SEM imaging,and models of the MSA were proposed.展开更多
Two new Mn(Ⅱ)coordination polymers,namely{[Mn_(2)(HL)(phen)_(3)(H_(2)O)_(2)]·7.5H_(2)O}_n(1)and[Mn_(4)(HL)_(2)(1,4-bib)_(3)(H_(2)O)_(2)]_n(2),were synthesized under hydrothermal conditions by using Mn(Ⅱ)ions an...Two new Mn(Ⅱ)coordination polymers,namely{[Mn_(2)(HL)(phen)_(3)(H_(2)O)_(2)]·7.5H_(2)O}_n(1)and[Mn_(4)(HL)_(2)(1,4-bib)_(3)(H_(2)O)_(2)]_n(2),were synthesized under hydrothermal conditions by using Mn(Ⅱ)ions and 6-(3',4'-dicarboxylphenoxy)-1,2,4-benzenetricarboxylic acid(H_(5)L)in the presence of N-auxiliary ligands 1,10-phenanthroline(phen)and1,4-bis(1H-imidazol-1-yl)benzene(1,4-bib).The structures of coordination polymers 1 and 2 were characterized by infrared spectroscopy,single-crystal X-ray diffraction,thermogravimetric analysis,and powder X-ray diffraction.Single-crystal X-ray diffraction reveals that 1 has a 1D chain structure based on binuclear Mn(Ⅱ)units,while 2 features a(3,8)-connected 3D network structure based on tetranuclear Mn(Ⅱ)units.Magnetic studies show that 1 and 2exhibit antiferromagnetic interactions between manganese ions.2 shows stronger antiferromagnetic interactions due to the shorter Mn…Mn distances within the tetranuclear manganese units.CCDC:2357601,1;2357602,2.展开更多
Magnetic field gradient tensor measurement is an important technique to obtain position information of magnetic objects. When using magnetic field sensors to measure magnetic field gradient as the coefficients of tens...Magnetic field gradient tensor measurement is an important technique to obtain position information of magnetic objects. When using magnetic field sensors to measure magnetic field gradient as the coefficients of tensor, field differentiation is generally approximated by field difference. As a result, magnetic objects positioning by magnetic field gradient tensor measurement always involves an inherent error caused by sensor sizes, leading to a reduction in detectable distance and detectable angle. In this paper, the inherent positioning error caused by magnetic field gradient tensor measurement is calculated and corrected by iterations based on the systematic position error distribution patterns. The results show that, the detectable distance range and the angle range of an ac magnetic object（2.44 Am^2@1 kHz） can be increased from（0.45 m, 0.75 m）,（0？, 25？） to（0.30 m, 0.80 m）,（0？,80？）, respectively.展开更多
In order to investigate the physical mechanism of metal magnetic memory testing, both the influences of earth magnetic field and applied stress on magnetic domain structure were discussed. Static tension and fatigue t...In order to investigate the physical mechanism of metal magnetic memory testing, both the influences of earth magnetic field and applied stress on magnetic domain structure were discussed. Static tension and fatigue tests for low carbon steel plate specimens were carried out on hydraulic servo testing machine of MTS810 type and magnetic signals were measured during the processes by the type of EMS-2003 instrument. The results indicate that the initial magnetic signals of specimens are different before loading. The magnetic signals curves are transformed from initial random to regular pattern due to the effect of two types of loads. However, the shape and distribution of magnetic signal curves in the elastic region are different from that of plastic region in tension test. While in fatigue test those magnetic signals curves corresponding to different cycles are similar. The H_p(y) value of magnetic signals on the fracture zone increases dramatically at the breaking transient time and positive-negative magnetic poles occur on the two parts of fracture zone.展开更多
In order to investigate the regularity of metal magnetic signals of ferromagnetic materials under the effect of applied load, the static tensile test of Q235 steel and 18CrNiWA steel plate specimens were conducted and...In order to investigate the regularity of metal magnetic signals of ferromagnetic materials under the effect of applied load, the static tensile test of Q235 steel and 18CrNiWA steel plate specimens were conducted and metal magnetic memory signals of specimens were measured during the test process. The influencing factors of metal magnetic memory signals and the relationship between axial applied load and signals were analyzed. The fracture and microstructure of the specimens were observed. The results show that the magnetic signals corresponding to the measured points change linearly approximately with increasing axial load. The microstructure of Q235 steel is ferrite and perlite, whereas that of 18CrNiWA steel is bainite and low-carbon martensite. The fracture of these two kinds of specimens is ductile rupture; carbon content of specimen materials and dislocation glide give much contribution to the characteristics of magnetic curves.展开更多
Fe-6.5Si soft magnetic composites(SMCs)with hybrid phosphate-silica insulation coatings have been designed to improve their comprehensive property via chemical coating combining sol-gel method in this work.The microst...Fe-6.5Si soft magnetic composites(SMCs)with hybrid phosphate-silica insulation coatings have been designed to improve their comprehensive property via chemical coating combining sol-gel method in this work.The microstructure and magnetic performance of the Fe-6.5Si SMCs with hybrid phosphate-silica insulation coatings were investigated.The hybrid phosphate-silica coatings with high heat resistance and high withstand pressure,formed on the surface of the Fe-6.5Si ferromagnetic powders,were found stable in the composites.Compared with Fe-6.5Si SMCs coated by single phosphate or single silica,Fe-6.5Si SMCs with hybrid phosphate-silica show much higher permeability and lower core loss.The work provides a new way to optimize the magnetic performance of soft magnetic composites.展开更多
In order to eliminate noise interference of metal magnetic memory signal in early diagnosis of stress concentration zones and metal defects, the empirical mode decomposition method combined with the magnetic field gra...In order to eliminate noise interference of metal magnetic memory signal in early diagnosis of stress concentration zones and metal defects, the empirical mode decomposition method combined with the magnetic field gradient characteristic was proposed. A compressive force periodically acting upon a casing pipe led to appreciable deformation, and magnetic signals were measured by a magnetic indicator TSC-1M-4. The raw magnetic memory signal was first decomposed into different intrinsic mode functions and a residue, and the magnetic field gradient distribution of the subsequent reconstructed signal was obtained. The experimental results show that the gradient around 350 mm represents the maximum value ignoring the marginal effect, and there is a good correlation between the real maximum field gradient and the stress concentration zone. The wavelet transform associated with envelop analysis also exhibits this gradient characteristic, indicating that the proposed method is effective for early identifying critical zones.展开更多
Some magnetocaloric materials were used successfully in magnetic refrigeration application and became one of the critical parts of magnetic refrigeration technology whose delightful progresses were made worldwide in t...Some magnetocaloric materials were used successfully in magnetic refrigeration application and became one of the critical parts of magnetic refrigeration technology whose delightful progresses were made worldwide in the past 30 years. At the same time, the research on giant magnetocaloric materials will accelerate the development of room temperature magnetic refrigeration. In this paper, the new theoretical and experimental investigations on magnetic materials in room temperature application were described, including Gd and its binary and ternary intermetallic compounds, Mn-based compounds, La(Fe13-xMx)-based compounds and manganites. Based on the analysis of hysteresis, corrosion, cost and heat process, the comparison between different families of magnetic materials was discussed. Further research of room temperature magnetic refrigerant was suggested.展开更多
Magnetic polymer Fe_(3)O_(4)@P(MMA-AA-DVB)full of carboxylate-functionalized groups was prepared via suspension polymerization method with nano Fe_(3)O_(4)as a core,methyl methacrylate(MMA)and methacrylic acid(AA)as m...Magnetic polymer Fe_(3)O_(4)@P(MMA-AA-DVB)full of carboxylate-functionalized groups was prepared via suspension polymerization method with nano Fe_(3)O_(4)as a core,methyl methacrylate(MMA)and methacrylic acid(AA)as monomers,divinylbenzene(DVB)as a crosslinker.The Fe_(3)O_(4)@P(MMA-AA-DVB)was characterized by elementary analysis(EA),powder X-ray diffraction(XRD),Fourier-transformed infrared spectrometry(FTIR),transmission electron microscopy(TEM),vibrating sample magnetometer(VSM)and thermogravimetric-differential thermal gravity(TG-DTG).The application for its adsorption and enrichment properties for parabens in aqueous solution was investigated.Furthermore,a rapid,sensitive and accurate method for the simultaneous determination of 4 kinds of parabens,i.e.,methylparaben(MPB),ethylparaben(EPB),propylparaben(PPB)and butylparaben(BPB),in water and cosmetics by magnetic solid-phase extraction(MSPE)liquid chromatography(MSPE-HPLC)was reported.The effects for MSPE,e.g.sample pH values,enrichment time,type and amount of elution solutions were investigated.The results showed that the average particle size of Fe_(3)O_(4)@P(MMA-AA-DVB)was around 20 nm,with the saturation magnetization intensity of 10.66 emu·g^(-1).The enrichment factor of the target parabens reached 250.Under the optimal condition,linearities were obtained ranging from 2-2000μg·L^(-1)with correlation coefficients(R)higher than 0.9998 for the target parabens.The average recoveries were at 93.6%-101.2%with the relative standard deviations(RSDs)in the range of 0.8%-8.5%.The limits of detection(LODs)were in the range of 0.22-1.60 ng·L^(-1)and the limits of quantification(LOQs)were between 0.8 ng·L^(-1)and 5.0 ng·L^(-1).The developed method can be applied to the routine analyses for the determination of the parabens in water and cosmetics samples.The present method has been applied in the determination of the parabens in 15 real samples.The result showed that 13 of them were found to contain MPB or PPB at concentration of1.26-347.8μg·kg^(-1)for MPB and 44.89-224.8μg·kg^(-1)for PPB,respectively.展开更多
Magnetorheological(MR)materials are a class of smart material,whose the mechanical/rheological state can be controlled under a magnetic field.Magnetorheological materials are typically fluids,gels,or elastomers.In thi...Magnetorheological(MR)materials are a class of smart material,whose the mechanical/rheological state can be controlled under a magnetic field.Magnetorheological materials are typically fluids,gels,or elastomers.In this study,anisotropic and isotropic magneto-rheological elastomer(MRE)samples were fabricated using a silicone rubber matrix with carbonyl iron particles as filler particles.The magnetic field-dependent inductance properties of these samples were studied using inductors specially designed for the analysis.The effect of the filler particle content,fabrication conditions,and inductance properties were characterized using a self-built system in both constant and transient magnetic fields.These factors show a significant effect on the inductance properties of the MRE inductor under an applied magnetic field.The anisotropic MRE inductor was more sensitive than the inductor based on an isotropic MRE.Owing to the presence of a constant magnetic field,the inductance value of the MRE inductor decreased with an increase in the external magnetic field.An attempt in elucidation of the mechanism is reported here.This study may enable the MRE to be widely used in practical applications such as monitoring magnetic field or detecting the filler particle content inside MR materials.展开更多
The pulsed power is a potential means for energy saving and presents an alternative to the conventional mechanical communication for minerals.The effect of magnetic pulse treatment on grindability of a magnetite ore w...The pulsed power is a potential means for energy saving and presents an alternative to the conventional mechanical communication for minerals.The effect of magnetic pulse treatment on grindability of a magnetite ore was investigated by grindability tests.The results of the investigation show that the pulsed treatment has little effect on the particle size distribution of the magnetite ore.Significant micro-cracks or fractures are not found by SEM analysis in magnetic pulse treated sample.Magnetic separation of magnetic pulse treated and untreated magnetite ore indicates that iron recovery increases from 81.3% in the untreated sample to 87.7% in the magnetic pulse treated sample,and the corresponding iron grade increases from 42.1% to 44.4%.The results demonstrate that the magnetic pulse treatment does not significantly weaken the mineral grain boundaries or facilitate the liberation of minerals,but is beneficial to magnetic separation.展开更多
文摘T he residual stray magnetic fields present in ferromagnetic casting slabs were investigated in this work,which result from the magnetic fields generated during the steel casting process.Existing optical detection methods face challenges owing to surface oxide scales,and conventional high-precision magnetic sensors are ineffective at high temperatures.To overcome these limitations,a small coil sensor was employed to measure the residual magnetism strength in oscillation traces,using metal magnetic memory and electromagnetic induction methods,which can carry out detection without an external excitation source.Using this technology,the proposed scheme successfully detects defects at high tempe-ratures(up to 670℃)without a cooling device.The key findings include the ability to detect both surface and near-surface defects,such as cracks and oscillation marks,with an enhanced signal-to-noise ratio(SNR)of 7.2 dB after signal processing.The method’s practicality was validated in a steel mill environment,where testing on casting slabs effectively detected defects,providing a foundation for improving industrial quality control.The proposed detection scheme offers a significant advancement in nondestructive testing(NDT)for high-temperature applications,contributing to more efficient and accurate monitoring of ferromagnetic material integrity.
文摘Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.
基金funded on the one hand by Agence de l'Innovation de Défense(AID)grant reference number 2021650044on the other hand by Ecole Centrale de Nantes。
文摘Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.
基金Project(52174245)supported by the National Natural Science Foundation of ChinaProject(2021J01640)supported by the Natural Science Foundation of Fujian Province,ChinaProject(BGRIMM-KJSKL2022-03)supported by Open Foundation of the State Key Laboratory of Mineral Processing,China。
文摘Micro-and nano-to millimeter-scale magnetic matrix materials have gained widespread application due to their exceptional magnetic properties and favorable cost-effectiveness.With the rapid progress in condensed matter physics,materials science,and mineral separation technologies,these materials are now poised for new opportunities in theoretical research and development.This review provides a comprehensive analysis of these matrices,encompassing their structure,size,shape,composition,properties,and multifaceted applications.These materials,primarily composed of alloys of transition state metasl such as iron(Fe),cobalt(Co),titanium(Ti),and nickel(Ni),exhibit unique attributes like high magnetization rates,low eleastic modulus,and high saturation magnetic field strengths.Furthermore,the studies also delve into the complex mechanical interactions involved in the separation of magnetic particles using magnetic separator matrices,including magnetic,gravitational,centrifugal,and van der Waals forces.The review outlines how size and shape effects influence the magnetic behavior of matrices,offering new perspectives for innovative applications of magnetic matrices in various domains of materials science and magnetic separation.
文摘A novel nitrogen-doped graphene(NG)supporting magnetic nanoparticles(Fe and Fe_(3)C)was synthesized from g-C_(3)N_(4)and Fe(C_(5)H_(5))_(2).When used as a photocatalyst exposed to visible light,the material was excellent in degrading tetracycline(TC)in aqueous solutions.Scanning electron microscopy indicated that it had a folded sheet structure,with numerous nanoparticles observed on graphene sheets.Raman spectroscopy confirmed the presence of significant defects in the material,which suppressed the recombination of photogenerated electron-hole pairs.The performance and degradation mechanism of the photocatalyst was verified using a series of optical and electrochemical experiments and theoretical calculations.The degradation efficiency of the catalyst for TC was as high as 97.1%in 120 min under visible light irradiation,which is superior to other reported catalysts.A mechanism study showed that TC is rapidly degraded into CO_(2),H_(2)O and other small inorganic molecules,with holes(h^(+))serving as the primary driving force.The catalyst had an outstanding stability and reusability,and could be easily recovered using an external magnetic field.
文摘A trinuclear copper complex [Cu_(3)(L2)_(2)(SO_(4))_(2)(H_(2)O)_(7)]·8H_(2)O(1)(HL2=1-hydroxy-3-(pyrazin-2-yl)-N-(pyrazin-2-ylmethyl)imidazo[1,5-a]pyrazine-8-carboxamide) with a multi-substituted imidazo[1,5-a]pyrazine scaffold was serendipitously prepared from the reaction of the pro-ligand of H_(2)L1(N,N'-bis(pyrazin-2-ylmethyl)pyrazine-2,3-dicarboxamide) with CuSO_(4)·5H_(2O) in aqueous solution at room temperature.Complex 1 was characterized by IR,single-crystal X-ray analysis,and magnetic susceptibility measurements.Single-crystal X-ray analysis reveals that the complex consists of three Cu(Ⅱ) ions,two in situ transformed L2~-ligands,two coordinated sulfates,seven coordinated water molecules,and eight uncoordinated water molecules.Magnetic susceptibility measurement indicates that there are obvious ferromagnetic coupling interactions between the adjacent Cu(Ⅱ) ions in 1.CCDC:1852713.
文摘G-quadruplexes,which are unique nucleic acid secondary structures formed by the folding of guaninerich DNA or RNA,are closely related to essential biological activities.They exhibit extensive application prospects owing to their abundant binding sites and distinct physicochemical properties.Therefore,G-quadruplexes have attracted widespread attention in recent decades.Nuclear magnetic resonance(NMR)technology is an ideal tool for characterizing molecular structures and plays a crucial role in exploring the self-assembly process of G-quadruplexes.In this article,we introduce the basic concepts of NMR,followed by reviewing the applications of NMR in G-quadruplexes.Finally,challenges and prospects of NMR technology in the field of G-quadruplex research are discussed.
文摘A new cobalt(Ⅱ)-radical complex:[Co(im4-py)_(2)(PNB)_(2)](im4-py=2-(4'-pyridyl)-4,4,5,5-tetramethylimidazole-1-oxyl,HPNB=p-nitrobenzoic acid)has been synthesized and characterized by X-ray diffraction analysis,elemental analysis,IR,and magnetic properties.X-ray diffraction analysis shows that the complex exists as mononuclear molecules and Co(Ⅱ)ion is four-coordinated with two radicals and two PNB-ligands.The magnetic susceptibility study indicates the complex exhibits weak ferromagnetic interactions between cobalt(Ⅱ)and im4-py radical.The magnetic property is explained by the magnetic and structure exchange mechanism.CCDC:976028.
基金supported by Hefei National Laboratory,Innovation Program for Quantum Science and Technology(Grant Nos.2021ZD0300500 and 2021ZD0300503).
文摘Achieving the spin-exchange relaxation-free(SERF)state in atomic comagnetometers(ACMs)necessitates a stable and weak magnetic environment.This paper presents the design of a miniaturized permalloy magnetic shielding spherical shell(MSSS)with minimal apertures,tailored to meet these requirements.By employing a combination of analytical solutions and finite element analysis(FEA),we achieved superior magnetic shielding while maintaining a compact form factor.The analytical solution for the shielding factor indicated that a four-layer permalloy sphere shell with optimized air gaps was necessary.A numerical analysis model of the MSSS was developed and validated using COMSOL software,confirming the suitability of the air gaps.The size,shape,and orientation of the openings in the perforated sphere shell were meticulously designed and optimized to minimize residual magnetism.The optimal structure was fabricated,resulting in triaxial shielding factors of 47619,52631,and 21739,meeting the anticipated requirements.A comparison of simulation results with experimental tests demonstrated the efficacy of the design methodology.This study has significant implications for ultrasensitive magnetic field detection devices requiring weak magnetic field environments,such as atomic gyroscopes,magnetometers,atomic interferometers,and atomic clocks.
基金Project(51274256)supported by the National Natural Science Foundation of China
文摘Magnetic seeding agglomeration(MSA),i.e.,adding magnetic seeds and a low intensity pre-magnetization for fine agglomeration,was applied to the flotation of coal,pyrite and hematite ore slimes.Size analysis and flotation tests highlight that the MSA improved flotation recovery and kinetics of pyrite ore while causing some loss in selectivity,and in the presences of the polyacrylamide for coal and starch for hematite the agglomeration flotation was further strengthened due to the synergetic effect between the flocculants and magnetic seeds.Magnetism analyses and calculation confirmed the adsorption of magnetic seeds onto minerals,resulting in a decreased threshold magnetic field intensity for the MSA to happen.Then atomic force microscope(AFM)study found that there exists a long range force between magnetic seeds and minerals,which facilitates the adsorption of magnetic seeds on minerals.FTIR shows both the polyacrylamide and starch adsorbed onto minerals and magnetic seeds,thus acting as the bridging media between minerals and magnetic seeds,intensifying the agglomeration in flotation.Surface characterization of the MSA was understood by SEM imaging,and models of the MSA were proposed.
文摘Two new Mn(Ⅱ)coordination polymers,namely{[Mn_(2)(HL)(phen)_(3)(H_(2)O)_(2)]·7.5H_(2)O}_n(1)and[Mn_(4)(HL)_(2)(1,4-bib)_(3)(H_(2)O)_(2)]_n(2),were synthesized under hydrothermal conditions by using Mn(Ⅱ)ions and 6-(3',4'-dicarboxylphenoxy)-1,2,4-benzenetricarboxylic acid(H_(5)L)in the presence of N-auxiliary ligands 1,10-phenanthroline(phen)and1,4-bis(1H-imidazol-1-yl)benzene(1,4-bib).The structures of coordination polymers 1 and 2 were characterized by infrared spectroscopy,single-crystal X-ray diffraction,thermogravimetric analysis,and powder X-ray diffraction.Single-crystal X-ray diffraction reveals that 1 has a 1D chain structure based on binuclear Mn(Ⅱ)units,while 2 features a(3,8)-connected 3D network structure based on tetranuclear Mn(Ⅱ)units.Magnetic studies show that 1 and 2exhibit antiferromagnetic interactions between manganese ions.2 shows stronger antiferromagnetic interactions due to the shorter Mn…Mn distances within the tetranuclear manganese units.CCDC:2357601,1;2357602,2.
基金supported by the National Natural Science Foundation of China(61473023)
文摘Magnetic field gradient tensor measurement is an important technique to obtain position information of magnetic objects. When using magnetic field sensors to measure magnetic field gradient as the coefficients of tensor, field differentiation is generally approximated by field difference. As a result, magnetic objects positioning by magnetic field gradient tensor measurement always involves an inherent error caused by sensor sizes, leading to a reduction in detectable distance and detectable angle. In this paper, the inherent positioning error caused by magnetic field gradient tensor measurement is calculated and corrected by iterations based on the systematic position error distribution patterns. The results show that, the detectable distance range and the angle range of an ac magnetic object（2.44 Am^2@1 kHz） can be increased from（0.45 m, 0.75 m）,（0？, 25？） to（0.30 m, 0.80 m）,（0？,80？）, respectively.
文摘In order to investigate the physical mechanism of metal magnetic memory testing, both the influences of earth magnetic field and applied stress on magnetic domain structure were discussed. Static tension and fatigue tests for low carbon steel plate specimens were carried out on hydraulic servo testing machine of MTS810 type and magnetic signals were measured during the processes by the type of EMS-2003 instrument. The results indicate that the initial magnetic signals of specimens are different before loading. The magnetic signals curves are transformed from initial random to regular pattern due to the effect of two types of loads. However, the shape and distribution of magnetic signal curves in the elastic region are different from that of plastic region in tension test. While in fatigue test those magnetic signals curves corresponding to different cycles are similar. The H_p(y) value of magnetic signals on the fracture zone increases dramatically at the breaking transient time and positive-negative magnetic poles occur on the two parts of fracture zone.
基金Projects(50235030, 50505052) supported by the National Natural Science Foundation of China
文摘In order to investigate the regularity of metal magnetic signals of ferromagnetic materials under the effect of applied load, the static tensile test of Q235 steel and 18CrNiWA steel plate specimens were conducted and metal magnetic memory signals of specimens were measured during the test process. The influencing factors of metal magnetic memory signals and the relationship between axial applied load and signals were analyzed. The fracture and microstructure of the specimens were observed. The results show that the magnetic signals corresponding to the measured points change linearly approximately with increasing axial load. The microstructure of Q235 steel is ferrite and perlite, whereas that of 18CrNiWA steel is bainite and low-carbon martensite. The fracture of these two kinds of specimens is ductile rupture; carbon content of specimen materials and dislocation glide give much contribution to the characteristics of magnetic curves.
基金Projects(2020GDSYL-20200402008,2018GDASCX-0117)supported by GDAS’Project of Science and Technology Development,ChinaProjects(2015B010136004,2019A1515010886)supported by Science and Technology Planning Project of Guangdong Province of ChinaProject(1920001001392)supported by Key Technology Project of Foshan,China。
文摘Fe-6.5Si soft magnetic composites(SMCs)with hybrid phosphate-silica insulation coatings have been designed to improve their comprehensive property via chemical coating combining sol-gel method in this work.The microstructure and magnetic performance of the Fe-6.5Si SMCs with hybrid phosphate-silica insulation coatings were investigated.The hybrid phosphate-silica coatings with high heat resistance and high withstand pressure,formed on the surface of the Fe-6.5Si ferromagnetic powders,were found stable in the composites.Compared with Fe-6.5Si SMCs coated by single phosphate or single silica,Fe-6.5Si SMCs with hybrid phosphate-silica show much higher permeability and lower core loss.The work provides a new way to optimize the magnetic performance of soft magnetic composites.
基金Project(10772061) supported by the National Natural Science Foundation of ChinaProject(A200907) supported by the Natural Science Foundation of Heilongjiang Province, China Project(20092322120001) supported by the PhD Programs Foundations of Ministry of Education of China
文摘In order to eliminate noise interference of metal magnetic memory signal in early diagnosis of stress concentration zones and metal defects, the empirical mode decomposition method combined with the magnetic field gradient characteristic was proposed. A compressive force periodically acting upon a casing pipe led to appreciable deformation, and magnetic signals were measured by a magnetic indicator TSC-1M-4. The raw magnetic memory signal was first decomposed into different intrinsic mode functions and a residue, and the magnetic field gradient distribution of the subsequent reconstructed signal was obtained. The experimental results show that the gradient around 350 mm represents the maximum value ignoring the marginal effect, and there is a good correlation between the real maximum field gradient and the stress concentration zone. The wavelet transform associated with envelop analysis also exhibits this gradient characteristic, indicating that the proposed method is effective for early identifying critical zones.
基金Project(50876082) supported by the National Natural Science Foundation of ChinaProject(IRT0746) supported by the Changjiang Scholars and Innovative Research Team in University
文摘Some magnetocaloric materials were used successfully in magnetic refrigeration application and became one of the critical parts of magnetic refrigeration technology whose delightful progresses were made worldwide in the past 30 years. At the same time, the research on giant magnetocaloric materials will accelerate the development of room temperature magnetic refrigeration. In this paper, the new theoretical and experimental investigations on magnetic materials in room temperature application were described, including Gd and its binary and ternary intermetallic compounds, Mn-based compounds, La(Fe13-xMx)-based compounds and manganites. Based on the analysis of hysteresis, corrosion, cost and heat process, the comparison between different families of magnetic materials was discussed. Further research of room temperature magnetic refrigerant was suggested.
文摘Magnetic polymer Fe_(3)O_(4)@P(MMA-AA-DVB)full of carboxylate-functionalized groups was prepared via suspension polymerization method with nano Fe_(3)O_(4)as a core,methyl methacrylate(MMA)and methacrylic acid(AA)as monomers,divinylbenzene(DVB)as a crosslinker.The Fe_(3)O_(4)@P(MMA-AA-DVB)was characterized by elementary analysis(EA),powder X-ray diffraction(XRD),Fourier-transformed infrared spectrometry(FTIR),transmission electron microscopy(TEM),vibrating sample magnetometer(VSM)and thermogravimetric-differential thermal gravity(TG-DTG).The application for its adsorption and enrichment properties for parabens in aqueous solution was investigated.Furthermore,a rapid,sensitive and accurate method for the simultaneous determination of 4 kinds of parabens,i.e.,methylparaben(MPB),ethylparaben(EPB),propylparaben(PPB)and butylparaben(BPB),in water and cosmetics by magnetic solid-phase extraction(MSPE)liquid chromatography(MSPE-HPLC)was reported.The effects for MSPE,e.g.sample pH values,enrichment time,type and amount of elution solutions were investigated.The results showed that the average particle size of Fe_(3)O_(4)@P(MMA-AA-DVB)was around 20 nm,with the saturation magnetization intensity of 10.66 emu·g^(-1).The enrichment factor of the target parabens reached 250.Under the optimal condition,linearities were obtained ranging from 2-2000μg·L^(-1)with correlation coefficients(R)higher than 0.9998 for the target parabens.The average recoveries were at 93.6%-101.2%with the relative standard deviations(RSDs)in the range of 0.8%-8.5%.The limits of detection(LODs)were in the range of 0.22-1.60 ng·L^(-1)and the limits of quantification(LOQs)were between 0.8 ng·L^(-1)and 5.0 ng·L^(-1).The developed method can be applied to the routine analyses for the determination of the parabens in water and cosmetics samples.The present method has been applied in the determination of the parabens in 15 real samples.The result showed that 13 of them were found to contain MPB or PPB at concentration of1.26-347.8μg·kg^(-1)for MPB and 44.89-224.8μg·kg^(-1)for PPB,respectively.
基金Project(cstc2019jcyj-msxm X0005)supported by General Program of Chongqing Natural Science Foundation,ChinaProject(51905062)supported by the National Natural Science Foundation of China。
文摘Magnetorheological(MR)materials are a class of smart material,whose the mechanical/rheological state can be controlled under a magnetic field.Magnetorheological materials are typically fluids,gels,or elastomers.In this study,anisotropic and isotropic magneto-rheological elastomer(MRE)samples were fabricated using a silicone rubber matrix with carbonyl iron particles as filler particles.The magnetic field-dependent inductance properties of these samples were studied using inductors specially designed for the analysis.The effect of the filler particle content,fabrication conditions,and inductance properties were characterized using a self-built system in both constant and transient magnetic fields.These factors show a significant effect on the inductance properties of the MRE inductor under an applied magnetic field.The anisotropic MRE inductor was more sensitive than the inductor based on an isotropic MRE.Owing to the presence of a constant magnetic field,the inductance value of the MRE inductor decreased with an increase in the external magnetic field.An attempt in elucidation of the mechanism is reported here.This study may enable the MRE to be widely used in practical applications such as monitoring magnetic field or detecting the filler particle content inside MR materials.
基金Projects(N140108001,N150106003)supported by the Fundamental Research Funds for National University of China
文摘The pulsed power is a potential means for energy saving and presents an alternative to the conventional mechanical communication for minerals.The effect of magnetic pulse treatment on grindability of a magnetite ore was investigated by grindability tests.The results of the investigation show that the pulsed treatment has little effect on the particle size distribution of the magnetite ore.Significant micro-cracks or fractures are not found by SEM analysis in magnetic pulse treated sample.Magnetic separation of magnetic pulse treated and untreated magnetite ore indicates that iron recovery increases from 81.3% in the untreated sample to 87.7% in the magnetic pulse treated sample,and the corresponding iron grade increases from 42.1% to 44.4%.The results demonstrate that the magnetic pulse treatment does not significantly weaken the mineral grain boundaries or facilitate the liberation of minerals,but is beneficial to magnetic separation.
