The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber ...The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.展开更多
Lumber moisture content(LMC) is the important parameter to judge the dryness of lumber and the quality of wooden products.Nevertheless the data acquired are mostly redundant and incomplete because of the complexity of...Lumber moisture content(LMC) is the important parameter to judge the dryness of lumber and the quality of wooden products.Nevertheless the data acquired are mostly redundant and incomplete because of the complexity of the course of drying,by interference factors that exist in the dryness environment and by the physical characteristics of the lumber itself.To improve the measuring accuracy and reliability of LMC,the optimal support vector machine(SVM) algorithm was put forward for regression analysis LMC.Environmental factors such as air temperature and relative humidity were considered,the data of which were extracted with the principle component analysis method.The regression and prediction of SVM was optimized based on the grid search(GS) technique.Groups of data were sampled and analyzed,and simulation comparison of forecasting performance shows that the main component data were extracted to speed up the convergence rate of the optimum algorithm.The GS-SVM shows a better performance in solving the LMC measuring and forecasting problem.展开更多
We studied the effect of salinity on nail-hold- ing power in wood construction. In saline solution, the holding power of nails was less than in purified water. With the increase of salt concentration, the surface and ...We studied the effect of salinity on nail-hold- ing power in wood construction. In saline solution, the holding power of nails was less than in purified water. With the increase of salt concentration, the surface and side nail- holding power of the wood specimens both declined, but the differences between salinity treatments were not sig- nificant. However, compared to the surface and side nail- holding power, the power on the edge was generally less and the difference was not obvious in different salt con- centrations. In the same salt concentration, with the extension of the processing cycle, the performance of holding power of nails showed a downward trend, expect the temporary rise in the middle.展开更多
The viscoelastic characteristics of Aspen laminated veneer lumber (LVD were investigated with results revealing the dynamic creep behaviour under asymmetrical cyclic loading, which is analogous to solid wood under a s...The viscoelastic characteristics of Aspen laminated veneer lumber (LVD were investigated with results revealing the dynamic creep behaviour under asymmetrical cyclic loading, which is analogous to solid wood under a static load. Curves for the creep indicated that after 10s cycles, the multiple correlation coefficient R2 for the 4-element, is more than 0. 98 in any instance, overwhelmingly well fitted to the data obtained. The mean square error of the 3-element viscoelastic model was 1 - 5 times higher than of the 4-ele-ment model under various cyclic loadings within a relative large loading range. The viscoelastic curves for LVL samples are nonlinear. They were linearized at some stress levels below 60% of their limited intensities. As loading was sustained for a longer period, the viscous flow was found to have a tendency of attenuation. The work absorbed by a specimen before the occurrence of creep failure, could be estimated in terms of failure appearance. Consequently, we could calculate the展开更多
The stress-strain relation of laminated veneer lumber (LVL) was established by the method of regression, and its constitutive equation at large deformation and constant loading conditions was given to predict the stat...The stress-strain relation of laminated veneer lumber (LVL) was established by the method of regression, and its constitutive equation at large deformation and constant loading conditions was given to predict the static mechanical behaviors of LVL.展开更多
A comparative study was conducted on liquid penetration of the freeze-drying and air-drying sapwood and heartwood lumber of plantation Chinese fir （Cunninghamia lanceolata）. The maximum amount of dyeing solution upt...A comparative study was conducted on liquid penetration of the freeze-drying and air-drying sapwood and heartwood lumber of plantation Chinese fir （Cunninghamia lanceolata）. The maximum amount of dyeing solution uptake by the capillary rise method was used to evaluate the liquid penetration properties of the treated wood. The pit aspiration ratio was determined by semithin section method. Changes in wood microstructure were investigated using scanning electron microscopy. The results showed that compared with air drying, the freeze drying had a significant effect on liquid penetration of sapwood and heartwood of Chinese fir. The liquid penetration of sapwood is significantly higher than that of the heartwood for both drying treatments. Low pit aspiration ratio and cracks of pits membrane of some bordered pits are the main reasons for increasing liquid penetration after freeze drying treatment.展开更多
Poplar lumber (Populus ussuriensis) is impregnated with low molecular weight PF resin, then it is heated and compressed so that the resin is fixed in wood. The wood is called surface compressive wood. This paper measu...Poplar lumber (Populus ussuriensis) is impregnated with low molecular weight PF resin, then it is heated and compressed so that the resin is fixed in wood. The wood is called surface compressive wood. This paper measured the index of physical mechanical properties. The result show that the average density of untreated wood is 415kg·m -3 , with the increase of compression set, the density went up clearly. From surface to inner the density is decrease gradually. With the increase of compression set , the compression strength of parallel to grain, bending strength, modulus of elasticity and surface hardness is raised obviously. The color of wood is slightly varied to yellow.展开更多
基金Standard system on forestry engineering of Ministry ofScience and Technology ( 2004DEA70900-1).
文摘The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.
基金supported by the Natural Science Foundation of China(Grant No.31470715),(Grant No.31470714)the Fundamental Research Funds for the Central Universities(2572016EBT1)
文摘Lumber moisture content(LMC) is the important parameter to judge the dryness of lumber and the quality of wooden products.Nevertheless the data acquired are mostly redundant and incomplete because of the complexity of the course of drying,by interference factors that exist in the dryness environment and by the physical characteristics of the lumber itself.To improve the measuring accuracy and reliability of LMC,the optimal support vector machine(SVM) algorithm was put forward for regression analysis LMC.Environmental factors such as air temperature and relative humidity were considered,the data of which were extracted with the principle component analysis method.The regression and prediction of SVM was optimized based on the grid search(GS) technique.Groups of data were sampled and analyzed,and simulation comparison of forecasting performance shows that the main component data were extracted to speed up the convergence rate of the optimum algorithm.The GS-SVM shows a better performance in solving the LMC measuring and forecasting problem.
基金financially supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)Jiangsu Overseas Research&Training Program for University Prominent Young&Middle-aged Teachers and Presidents
文摘We studied the effect of salinity on nail-hold- ing power in wood construction. In saline solution, the holding power of nails was less than in purified water. With the increase of salt concentration, the surface and side nail- holding power of the wood specimens both declined, but the differences between salinity treatments were not sig- nificant. However, compared to the surface and side nail- holding power, the power on the edge was generally less and the difference was not obvious in different salt con- centrations. In the same salt concentration, with the extension of the processing cycle, the performance of holding power of nails showed a downward trend, expect the temporary rise in the middle.
文摘The viscoelastic characteristics of Aspen laminated veneer lumber (LVD were investigated with results revealing the dynamic creep behaviour under asymmetrical cyclic loading, which is analogous to solid wood under a static load. Curves for the creep indicated that after 10s cycles, the multiple correlation coefficient R2 for the 4-element, is more than 0. 98 in any instance, overwhelmingly well fitted to the data obtained. The mean square error of the 3-element viscoelastic model was 1 - 5 times higher than of the 4-ele-ment model under various cyclic loadings within a relative large loading range. The viscoelastic curves for LVL samples are nonlinear. They were linearized at some stress levels below 60% of their limited intensities. As loading was sustained for a longer period, the viscous flow was found to have a tendency of attenuation. The work absorbed by a specimen before the occurrence of creep failure, could be estimated in terms of failure appearance. Consequently, we could calculate the
文摘The stress-strain relation of laminated veneer lumber (LVL) was established by the method of regression, and its constitutive equation at large deformation and constant loading conditions was given to predict the static mechanical behaviors of LVL.
基金This paper was supported by the National Natural Science Foundation of China （No. 30271053）
文摘A comparative study was conducted on liquid penetration of the freeze-drying and air-drying sapwood and heartwood lumber of plantation Chinese fir （Cunninghamia lanceolata）. The maximum amount of dyeing solution uptake by the capillary rise method was used to evaluate the liquid penetration properties of the treated wood. The pit aspiration ratio was determined by semithin section method. Changes in wood microstructure were investigated using scanning electron microscopy. The results showed that compared with air drying, the freeze drying had a significant effect on liquid penetration of sapwood and heartwood of Chinese fir. The liquid penetration of sapwood is significantly higher than that of the heartwood for both drying treatments. Low pit aspiration ratio and cracks of pits membrane of some bordered pits are the main reasons for increasing liquid penetration after freeze drying treatment.
文摘Poplar lumber (Populus ussuriensis) is impregnated with low molecular weight PF resin, then it is heated and compressed so that the resin is fixed in wood. The wood is called surface compressive wood. This paper measured the index of physical mechanical properties. The result show that the average density of untreated wood is 415kg·m -3 , with the increase of compression set, the density went up clearly. From surface to inner the density is decrease gradually. With the increase of compression set , the compression strength of parallel to grain, bending strength, modulus of elasticity and surface hardness is raised obviously. The color of wood is slightly varied to yellow.
