Urea oxidation reaction(UOR)is proposed as an exemplary half-reaction in renewable energy applications because of its low thermodynamical potential.However,challenges persist due to sluggish reaction kinetics and comp...Urea oxidation reaction(UOR)is proposed as an exemplary half-reaction in renewable energy applications because of its low thermodynamical potential.However,challenges persist due to sluggish reaction kinetics and complex by-products separation.To this end,we introduce the lattice oxygen oxidation mechanism(LOM),propelling a novel UOR route using a modified CoFe layered double hydroxide(LDH)catalyst termed CFRO-7.Theoretical calculations and in-situ characterizations highlight the activated lattice oxygen(O_(L))within CFRO-7 as pivotal sites for UOR,optimizing the reaction pathway and accelerating the kinetics.For the urea overall electrolysis application,the LOM route only requires a low voltage of 1.54 V to offer a high current of 100 mA cm^(-2) for long-term utilization(>48 h).Importantly,the by-product NCO^(-)−is significantly suppressed,while the CO_(2)2/N_(2) separation is efficiently achieved.This work proposed a pioneering paradigm,invoking the LOM pathway in urea electrolysis to expedite reaction dynamics and enhance product selectivity.展开更多
In this paper, the partial oxidation of methane to synthesis gas using lattice oxygen of La1- SrxMO3-λ (M=Fe, x ...In this paper, the partial oxidation of methane to synthesis gas using lattice oxygen of La1- SrxMO3-λ (M=Fe, x Mn) perovskite oxides instead of molecular oxygen was investigated. The redox circulation between 11% O2/Ar flow and 11% CH4/He flow at 900℃ shows that methane can be oxidized to CO and H2 with a selectivity of over 90.7% using the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite oxides in an appropriate reaction condition, while the lost lattice x oxygen can be supplemented by air re-oxidation. It is viable for the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite x oxides instead of molecular oxygen to react with methane to synthesis gas in the redox mode.展开更多
Double-perovskite type oxide LaSrFeCoO（LSFCO） was used as oxygen carrier for chemical looping steam methane reforming（CL-SMR） due to its unique structure and reactivity. Two different oxidation routes,steam-oxidat...Double-perovskite type oxide LaSrFeCoO（LSFCO） was used as oxygen carrier for chemical looping steam methane reforming（CL-SMR） due to its unique structure and reactivity. Two different oxidation routes,steam-oxidation and steam-air-stepwise-oxidation, were applied to investigate the recovery behaviors of the lattice oxygen in the oxygen carrier. The characterizations of the oxide were determined by X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, hydrogen temperature-programmed reduction（H-TPR） and scanning electron microscopy（SEM）. The fresh sample LSFCO exhibits a monocrystalline perovskite structure with cubic symmetry and high crystallinity, except for a little impurity phase due to the antisite defect of Fe/Co disorder. The deconvolution distribution of XPS patterns indicated that Co,and Fe are predominantly in an oxidized state(Feand Fe) and(Coand Co), while O 1s exists at three species of lattice oxygen, chemisorbed oxygen and physical adsorbed oxygen. The double perovskite structure and chemical composition recover to the original state after the steam and air oxidation, while the Co ion cannot incorporate into the double perovskite structure and thus form the CoO just via individual steam oxidation. In comparison to the two different oxidation routes, the sample obtained by steam-oxidation exhibits even higher CHconversion, CO and Hselectivity and stronger hydrogen generation capacity.展开更多
Co-free Li-rich layered oxide cathodes have drawn much attention owing to their low cost and high energy density.Nevertheless,anion oxidation of oxygen leads to oxygen peroxidation during the first charging process,wh...Co-free Li-rich layered oxide cathodes have drawn much attention owing to their low cost and high energy density.Nevertheless,anion oxidation of oxygen leads to oxygen peroxidation during the first charging process,which leads to co-migration of transition metal ions and oxygen vacancies,causing structural instability.In this work,we propose a pre-activation strategy driven by chemical impregnation to modulate the chemical state of surface lattice oxygen,thus regulating the structural and electrochemical properties of the cathodes.In-situ X-ray diffraction confirms that materials based on activated oxygen configuration have higher structural stability.More importantly,this novel efficient strategy endows the cathodes having a lower surface charge transfer barrier and higher Li+transfer kinetics characteristic and ameliorates its inherent issues.The optimized cathode exhibits excellent electrochemical performance:after 300 cycles,high capacity(from 238 m Ah g^(-1)to 193 m Ah g^(-1)at 1 C)and low voltage attenuation(168 mV)are obtained.Overall,this modulated surface lattice oxygen strategy improves the electrochemical activity and structural stability,providing an innovative idea to obtain high-capacity Co-free Li-rich cathodes for next-generation Li-ion batteries.展开更多
The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high...The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high-voltage cycling,which is related to the phase transformation and the surface sides reactions caused by the lattice oxygen evolution.Here,the simultaneous construction of a Mg,Ti-based surface integrated layer and bulk doping through Mg,Ti surface treatment could suppress the lattice oxygen evolution of Nirich material at deep charging.More importantly,Mg and Ti are co-doped into the particles surface to form an Mg_(2)TiO_(4) and Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with Mg and Ti vacancies.In the constructed surface integrated layer,the reverse electric field in the Mg_(2)TiO_(4) effectively suppressed the outward migration of the lattice oxygen anions,while Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with high electronic conductivity and good lithium ion conductor could effectively maintained the stability of the reaction interface during highvoltage cycling.Meanwhile,bulk Mg and Ti co-doping can mitigate the migration of Ni ions in the bulk to keep the stability of transition metal–oxygen(M-O)bond at deep charging.As a result,the NCM@MTP cathode shows excellent long cycle stability at high-voltage charging,which keep high capacity retention of 89.3%and 84.3%at 1 C after 200 and 100 cycles under room and elevated temperature of 25 and 55°C,respectively.This work provides new insights for manipulating the surface chemistry of electrode materials to suppress the lattice oxygen evolution at high charging voltage.展开更多
Selective oxidation of propane by lattice oxygen of vanadium-phosphorus oxide(VPO) catalysts was investigated with a pulse reactor in which the oxidation of propane and there-oxidation of catalyst were implemented alt...Selective oxidation of propane by lattice oxygen of vanadium-phosphorus oxide(VPO) catalysts was investigated with a pulse reactor in which the oxidation of propane and there-oxidation of catalyst were implemented alternately in the presence of water vapor. The principalproducts are acrylic acid (AA), acetic acid (HAc), and carbon oxides. In addition, small amounts ofC_1 and C_2 hydrocarbons were also found, molar ratio of AA to HAc is 1.4-2.2. The active oxygenspecies are those adsorbed on catalyst surface firmly and/or bound to catalyst lattice, i.e. latticeoxygen; the selective oxidation of propane on VPO catalysts can be carried out in a circulatingfluidized bed (CFB) riser reactor. For propane oxidation over VPO catalysts, the effects of reactiontemperature in a pulse reactor were found almost the same as in a steady-state flow reactor. Thatis, as the reaction temperature increases, propane conversion and the amount of C_1+C_2 hydrocarbonsin the product increase steadily, while selectivity to acrylic acid and to acetic acid increaseprior to 350℃ then begin to drop at temperatures higher than 350℃, and yields of acrylic acid andof acetic acid attained maximum at about 400℃. The maximum yields of acrylic acid and of aceticacid for a single-pass are 7.50% and 4.59% respectively, with 38.2% propane conversion. When theamount of propane pulsed decreases or the amount of catalyst loaded increases, the conversionincreases but the selectivity decreases. Increasing the flow rate of carrier gases causes theconversion pass through a minimum but selectivity and yields pass through a maximum. In a fixed bedreactor, it is hard to obtain high selectivity at a high reaction conversion due to the furtherdegradation of acrylic acid and acetic acid even though propane was oxidized by the lattice oxygen.The catalytic performance can be improved in the presence of excess propane. Propylene can beoxidized by lattice oxygen of VPO catalyst at 250℃, nevertheless, selectivity to AA and to HAc areeven lower, much more acetic acid was produced (molar ratio of AA to HAc is 0.19:1-0.83:1) thoughthe oxidation products are the same as from propane.展开更多
The oxygen evolution reaction(OER)is the essential module in energy conversion and storage devices such as electrolyzer,rechargeable metal–air batteries and regenerative fuel cells.The adsorption energy scaling relat...The oxygen evolution reaction(OER)is the essential module in energy conversion and storage devices such as electrolyzer,rechargeable metal–air batteries and regenerative fuel cells.The adsorption energy scaling relations between the reaction intermediates,however,impose a large intrinsic overpotential and sluggish reaction kinetics on OER catalysts.Developing advanced electrocatalysts with high activity and stability based on non-noble metal materials is still a grand challenge.Central to the rational design of novel and high-efficiency catalysts is the development and understanding of quantitative structure–activity relationships,which correlate the catalytic activities with structural and electronic descriptors.This paper comprehensively reviews the benchmark descriptors for OER electrolysis,aiming to give an in-depth understanding on the origins of the electrocatalytic activity of the OER and further contribute to building the theory of electrocatalysis.Meanwhile,the cutting-edge research frontiers for proposing new OER paradigms and crucial strategies to circumvent the scaling relationship are also summarized.Challenges,opportunities and perspectives are discussed,intending to shed some light on the rational design concepts and advance the development of more efficient catalysts for enhancing OER performance.展开更多
Ceria-zirconia solid solution has been prepared by the urea grind combustion and citric acid sol-gel methods for catalytic applications as oxygen storage/release materials in this study. The properties and oxygen stor...Ceria-zirconia solid solution has been prepared by the urea grind combustion and citric acid sol-gel methods for catalytic applications as oxygen storage/release materials in this study. The properties and oxygen storage/release capacities of samples with different Zr contents were characterized and evaluated by X-ray diffraction（XRD）, Nadsorption, scanning electron microscopy（SEM）, Raman spectroscopy, and insitu CO–COlooping test. The results demonstrate that the samples prepared by two methods are all of excellent lattice [O] release/storage properties and maintain good long-term cycle stability. But the preparation method significantly impacts the homogeneity of samples related to their redox properties and the content of Zr over 20%, which greatly changed the properties of ceria-zirconia solid solutions and caused their changing of crystalline symmetry from cubic to tetragonal. The samples prepared by citric acid solgel method are of more homogeneous particle sizes and higher specific surface areas than that by urea grind combustion method, which is benefit to the oxygen release rather than oxygen storage. The bulk oxygen amount migrated to surface increases with the increasing Zr content, however, the amount of lattice oxygen migration decreases when Zr content is over 20%. When Zr content is 20%, the differences of storage/release capacities from two different preparation methods are reduced at high temperature in the long-term loop reaction.展开更多
Transition metal chalcogenides(TMCs)are recognized as pre-catalysts,and their(oxy)hydroxides derived from electrochemical reconstruction are the active species in the water oxidation.However,understanding the role of ...Transition metal chalcogenides(TMCs)are recognized as pre-catalysts,and their(oxy)hydroxides derived from electrochemical reconstruction are the active species in the water oxidation.However,understanding the role of the residual chalcogen in the reconstructed layer is lacking in detail,and the corresponding catalytic mechanism remains controversial.Here,taking Cu_(1-x)Co_(x)S as a platform,we explore the regulating effect and existence form of the residual S doped into the reconstructive layer for oxygen evolution reaction(OER),where a dual-path OER mechanism is proposed.First-principles calculations and operando~(18)O isotopic labeling experiments jointly reveal that the residual S in the reconstructive layer of Cu_(1-x)Co_(x)S can wisely balance the adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM)by activating lattice oxygen and optimizing the adsorption/desorption behaviors at metal active sites,rather than change the reaction mechanism from AEM to LOM.Following such a dual-path OER mechanism,Cu_(0.4)Co_(0.6)S-derived Cu_(0.4)Co_(0.6)OSH not only overcomes the restriction of linear scaling relationship in AEM,but also avoids the structural collapse caused by lattice oxygen migration in LOM,so as to greatly reduce the OER potential and improved stability.展开更多
Ultra-high nickel cobalt-free lithium layered oxides are promising cathode material for lithium-ion batteries(LIBs)because of their relatively high capacity and low cost.Nevertheless,the high nickel content would indu...Ultra-high nickel cobalt-free lithium layered oxides are promising cathode material for lithium-ion batteries(LIBs)because of their relatively high capacity and low cost.Nevertheless,the high nickel content would induce bulk structure degradation and interfacial environment deterioration,and the absence of Co element reduces the lithium diffusion kinetics,severely limiting the performance liberation of this kind of cathodes.Herein,a multifunctional Ti/Zr dual cation co-doping strategy has been employed to improve the lithium storage performance of LiNi_(0.9)Mn_(0.1)O_(2)(NM91)cathode.On the one hand,the Ti/Zr co-doping weakens the Li^(+)/Ni^(2+)mixing through magnetic interactions due to the inexistence of unpaired electrons for Ti^(4+)and Zr^(4+),increasing the lithium diffusion rate and suppressing the harmful coexistence of H1 and H2 phases.On the other hand,they enhance the lattice oxygen stability because of the strong Ti-O and Zr-O bonds,inhibiting the undesired H3 phase transition and lattice oxygen loss,improving the bulk structure and cathode-electrolyte interface stability.As a result,the Ti/Zr co-doped NM91(NMTZ)exhibits a 91.2%capacity retention rate after 100 cycles,while that of NM91 is only82.9%.Also,the NMTZ displays better rate performance than NM91 with output capacities of 115 and93 mA h g^(-1)at a high current density of 5 C,respectively.Moreover,the designed NMTZ could enable the full battery to deliver an energy density up to 263 W h kg^(-1),making the ultra-high nickel cobaltfree lithium layered oxide cathode closer to practical applications.展开更多
Li-rich layered transition metal oxides are one of the most promising cathode materials for their high energy density.However,the cathodes usually suffer from severe potential dropping and capacity fading during cycli...Li-rich layered transition metal oxides are one of the most promising cathode materials for their high energy density.However,the cathodes usually suffer from severe potential dropping and capacity fading during cycling,which are associated with the surface oxygen release and accompanied by cation densification and structural collapse.Herein,an integrative approach of simultaneous constructing uniform 3d Fe-ion doping in the transition metal layer and Li-rich Li_(5)FeO_(4) shell to grab the oxygen and prevent interfacial side reactions is proposed.The introduction of Fe induces higher redox potential and stronger 3 d Fe-O_(2)p covalent bond,triggering reversible anionic redox via a reductive coupling mechanism.And the delithiated product of Li-rich Li_(5)FeO_(4) not only acts as a protective layer alleviating the side reactions but also enhances the surface kinetic property.With the benefit of promoted reversibility of oxygen redox and enhanced surface stability,the cathode exhibits high reversible capacity and superior cycle performance.Density function theory calculation indicates that the O_(2)p non-bonding state in the cathode incorporated with Fe sits at a lower energy band,resulting in higher energy storage voltage and improved oxygen stability.Consequently,the modified cathode exhibits a discharge specific capacity of 307 m A h g^(-1)(1 C=250 m A g^(-1)),coulombic efficiency of 82.09%in the initial cycle at 0.1 C and 88.34%capacity retention after 100 cycles at 1 C.The work illustrates a strategy that could simultaneously enhance oxygen redox reversibility and interface stability by constructing lattice bond coordination and delithiation induced protective layer to develop Li-rich materials with high reversible capacity and long lifespan.展开更多
A cost-effective and sustainable noble-metal free catalyst system based on ubiquitously available Mn-Cu bimetallic oxides was served as efficient catalysts for furfural selective oxidation to furancarboxylic acid(FA)....A cost-effective and sustainable noble-metal free catalyst system based on ubiquitously available Mn-Cu bimetallic oxides was served as efficient catalysts for furfural selective oxidation to furancarboxylic acid(FA). Interestingly, Mn_(2)Cu_(1)O_(x)exhibited an excellent furfural conversion of 99% with quantitative selectivity toward FA. Especially, we demonstrate the significant weakening of the Mn-O bonds with the incorporation of CuO into the Mn-Cu oxides, resulting in an improved OLreactivity of Mn_(2)Cu_(1)O_(x), which brings about a higher catalytic activity for furfural oxidation. More importantly, Mn_(2)Cu_(1)O_(x)could exhibit YFA>90% over 5 cycles of reusability test. Through this study, the relationship between the morphology, surface chemistry, and catalytic activity of Mn-Cu bimetallic oxides are elucidated, providing a simple and environmentally friendly catalytic strategy and scientific basis for the development of Mn-Cu bimetallic oxides bioderived molecular aerobic oxidation materials.展开更多
High-voltage LiCoO_(2)(LCO)offers a prelude to breaking the bottleneck of the energy density of lithium-ion batteries,however,LiCoO_(2)is subject to serious structural and interfacial degradation above voltages>4.5...High-voltage LiCoO_(2)(LCO)offers a prelude to breaking the bottleneck of the energy density of lithium-ion batteries,however,LiCoO_(2)is subject to serious structural and interfacial degradation above voltages>4.55 V(vs.Li/Li^(+)).Herein,an in-situ Li_(6.25)La_(3)Zr_(2)A_(l0.25)O_(12)(LLZAO)layer is constructed on the LCO surface to achieve operating voltage at 4.6 V.The detailed characterizations(ex-situ XRD,ex-situ Raman,DFT,etc.)reveal that the LLZAO layer greatly enhances Li+conductivity attributed to the ionconducting layer on the surface/interface,and closely combines with LiCoO_(2)particle to ensure stable cathode/electrolyte interface,thus suppressing the highly reactive Co^(4+)and O^(-)triggered surface side reactions at high-voltage.Moreover,the introduction of La^(3+)/Zr^(4+)/Al^(3+)with a larger ionic radius(La^(3+)/Zr^(4+)are larger than Co^(3+))and weaker electronegativity(La/Zr/Al are weaker than Co)into Co^(3+)sites readjusts the electron cloud density between Co–O–Li,which reinforces the Co–O bond and widens the band-center gap of Co 3d and O 2p,thus restraining the detrimental phase transition(from H3 to H1-3 phase)and the formation of Co_(3)O_(4)spinel phase(attributed to lattice oxygen release),subsequently alleviating the particle cracking and structural collapse during repeated Li^(+)de/intercalation.Therefore,after 100 cycles at 3.0–4.6 V,LCO@1.0LLZAO exhibits a superior discharge capacity of 188.5 m A h g^(-1),with a capacity retention of 85.1%.The above research has brought about meaningful guidance for the evolution of cathode materials with high voltage.展开更多
Charging P2-Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)to 4.5 V for higher capacity is enticing.However,it leads to severe capacity fading,ascribing to the lattice oxygen evolution and the P2-O2 phase transformation.Here,the Mg Fe_...Charging P2-Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)to 4.5 V for higher capacity is enticing.However,it leads to severe capacity fading,ascribing to the lattice oxygen evolution and the P2-O2 phase transformation.Here,the Mg Fe_(2)O_(4) coating and Mg,Fe co-doping were constructed simultaneously by Mg,Fe surface treatment to suppress lattice oxygen evolution and P2-O2 phase transformation of P2-Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)at deep charging.Through ex-situ X-ray diffraction(XRD)tests,we found that the Mg,Fe bulk co-doping could reduce the repulsion between transition metals and Na+/vacancies ordering,thus inhibiting the P2-O2 phase transition and significantly reducing the irreversible volume change of the material.Meanwhile,the internal electric field formed by the dielectric polarization of Mg Fe_(2)O_(4) effectively inhibits the outward migration of oxidized O^(a-)(a<2),thereby suppressing the lattice oxygen evolution at deep charging,confirmed by in situ Raman and ex situ XPS techniques.P2-Na NM@MF-3 shows enhanced high-voltage cycling performance with capacity retentions of 84.8% and 81.3%at 0.1 and 1 C after cycles.This work sheds light on regulating the surface chemistry for Na-layered oxide materials to enhance the high-voltage performance of Na-ion batteries.展开更多
基金supported by Fundamental Research Funds for the Central Universities(B220202062)supported by Key Program of National Natural Science Foundation of China(92047201,92047303,52102237)+1 种基金National Science Funds for Creative Research Groups of China(51421006)supported by Postdoctoral Science Foundations of China and Jiangsu Province(2021M690861,2022T150183,2021K065A)。
文摘Urea oxidation reaction(UOR)is proposed as an exemplary half-reaction in renewable energy applications because of its low thermodynamical potential.However,challenges persist due to sluggish reaction kinetics and complex by-products separation.To this end,we introduce the lattice oxygen oxidation mechanism(LOM),propelling a novel UOR route using a modified CoFe layered double hydroxide(LDH)catalyst termed CFRO-7.Theoretical calculations and in-situ characterizations highlight the activated lattice oxygen(O_(L))within CFRO-7 as pivotal sites for UOR,optimizing the reaction pathway and accelerating the kinetics.For the urea overall electrolysis application,the LOM route only requires a low voltage of 1.54 V to offer a high current of 100 mA cm^(-2) for long-term utilization(>48 h).Importantly,the by-product NCO^(-)−is significantly suppressed,while the CO_(2)2/N_(2) separation is efficiently achieved.This work proposed a pioneering paradigm,invoking the LOM pathway in urea electrolysis to expedite reaction dynamics and enhance product selectivity.
文摘In this paper, the partial oxidation of methane to synthesis gas using lattice oxygen of La1- SrxMO3-λ (M=Fe, x Mn) perovskite oxides instead of molecular oxygen was investigated. The redox circulation between 11% O2/Ar flow and 11% CH4/He flow at 900℃ shows that methane can be oxidized to CO and H2 with a selectivity of over 90.7% using the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite oxides in an appropriate reaction condition, while the lost lattice x oxygen can be supplemented by air re-oxidation. It is viable for the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite x oxides instead of molecular oxygen to react with methane to synthesis gas in the redox mode.
基金The financial support of the National Natural Science Foundation of China(51406208,51406214)supported by the Science&Technology Research Project of Guangdong Province(2015A010106009)the support of Key Laboratory of Renewable Energy,Chinese Academy of Sciences(Y607j51001)
文摘Double-perovskite type oxide LaSrFeCoO（LSFCO） was used as oxygen carrier for chemical looping steam methane reforming（CL-SMR） due to its unique structure and reactivity. Two different oxidation routes,steam-oxidation and steam-air-stepwise-oxidation, were applied to investigate the recovery behaviors of the lattice oxygen in the oxygen carrier. The characterizations of the oxide were determined by X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, hydrogen temperature-programmed reduction（H-TPR） and scanning electron microscopy（SEM）. The fresh sample LSFCO exhibits a monocrystalline perovskite structure with cubic symmetry and high crystallinity, except for a little impurity phase due to the antisite defect of Fe/Co disorder. The deconvolution distribution of XPS patterns indicated that Co,and Fe are predominantly in an oxidized state(Feand Fe) and(Coand Co), while O 1s exists at three species of lattice oxygen, chemisorbed oxygen and physical adsorbed oxygen. The double perovskite structure and chemical composition recover to the original state after the steam and air oxidation, while the Co ion cannot incorporate into the double perovskite structure and thus form the CoO just via individual steam oxidation. In comparison to the two different oxidation routes, the sample obtained by steam-oxidation exhibits even higher CHconversion, CO and Hselectivity and stronger hydrogen generation capacity.
基金the National Natural Science Foundation of China(51902072 and 22075062)the Heilongjiang Touyan Team(HITTY-20190033)+2 种基金the Heilongjiang Province“hundred million”project science and technology major special projects(2019ZX09A02)the State Key Laboratory of Urban Water Resource and Environment(Harbin Institute of Technology No.2020DX11)the Fundamental Research Funds for the Central Universities(FRFCU5710051922)。
文摘Co-free Li-rich layered oxide cathodes have drawn much attention owing to their low cost and high energy density.Nevertheless,anion oxidation of oxygen leads to oxygen peroxidation during the first charging process,which leads to co-migration of transition metal ions and oxygen vacancies,causing structural instability.In this work,we propose a pre-activation strategy driven by chemical impregnation to modulate the chemical state of surface lattice oxygen,thus regulating the structural and electrochemical properties of the cathodes.In-situ X-ray diffraction confirms that materials based on activated oxygen configuration have higher structural stability.More importantly,this novel efficient strategy endows the cathodes having a lower surface charge transfer barrier and higher Li+transfer kinetics characteristic and ameliorates its inherent issues.The optimized cathode exhibits excellent electrochemical performance:after 300 cycles,high capacity(from 238 m Ah g^(-1)to 193 m Ah g^(-1)at 1 C)and low voltage attenuation(168 mV)are obtained.Overall,this modulated surface lattice oxygen strategy improves the electrochemical activity and structural stability,providing an innovative idea to obtain high-capacity Co-free Li-rich cathodes for next-generation Li-ion batteries.
基金supported by the National Natural Science Foundation of China(51902108,51762006,51964013)the Special Projects for Central Government to Guide Local Technological Development(GUIKE ZY20198008)+2 种基金the Guangxi InnovationDriven Development Subject(GUIKE AA19182020,GUIKE AA19254004)the Guangxi Technology Base and Talent Subject(GUIKE AD18126001,GUIKE AD20999012,GUIKE AD20297086)the Special Fund for Guangxi Distinguished Expert。
文摘The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high-voltage cycling,which is related to the phase transformation and the surface sides reactions caused by the lattice oxygen evolution.Here,the simultaneous construction of a Mg,Ti-based surface integrated layer and bulk doping through Mg,Ti surface treatment could suppress the lattice oxygen evolution of Nirich material at deep charging.More importantly,Mg and Ti are co-doped into the particles surface to form an Mg_(2)TiO_(4) and Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with Mg and Ti vacancies.In the constructed surface integrated layer,the reverse electric field in the Mg_(2)TiO_(4) effectively suppressed the outward migration of the lattice oxygen anions,while Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with high electronic conductivity and good lithium ion conductor could effectively maintained the stability of the reaction interface during highvoltage cycling.Meanwhile,bulk Mg and Ti co-doping can mitigate the migration of Ni ions in the bulk to keep the stability of transition metal–oxygen(M-O)bond at deep charging.As a result,the NCM@MTP cathode shows excellent long cycle stability at high-voltage charging,which keep high capacity retention of 89.3%and 84.3%at 1 C after 200 and 100 cycles under room and elevated temperature of 25 and 55°C,respectively.This work provides new insights for manipulating the surface chemistry of electrode materials to suppress the lattice oxygen evolution at high charging voltage.
基金The work is supported by The Department of Education of Heilongjiang Province.
文摘Selective oxidation of propane by lattice oxygen of vanadium-phosphorus oxide(VPO) catalysts was investigated with a pulse reactor in which the oxidation of propane and there-oxidation of catalyst were implemented alternately in the presence of water vapor. The principalproducts are acrylic acid (AA), acetic acid (HAc), and carbon oxides. In addition, small amounts ofC_1 and C_2 hydrocarbons were also found, molar ratio of AA to HAc is 1.4-2.2. The active oxygenspecies are those adsorbed on catalyst surface firmly and/or bound to catalyst lattice, i.e. latticeoxygen; the selective oxidation of propane on VPO catalysts can be carried out in a circulatingfluidized bed (CFB) riser reactor. For propane oxidation over VPO catalysts, the effects of reactiontemperature in a pulse reactor were found almost the same as in a steady-state flow reactor. Thatis, as the reaction temperature increases, propane conversion and the amount of C_1+C_2 hydrocarbonsin the product increase steadily, while selectivity to acrylic acid and to acetic acid increaseprior to 350℃ then begin to drop at temperatures higher than 350℃, and yields of acrylic acid andof acetic acid attained maximum at about 400℃. The maximum yields of acrylic acid and of aceticacid for a single-pass are 7.50% and 4.59% respectively, with 38.2% propane conversion. When theamount of propane pulsed decreases or the amount of catalyst loaded increases, the conversionincreases but the selectivity decreases. Increasing the flow rate of carrier gases causes theconversion pass through a minimum but selectivity and yields pass through a maximum. In a fixed bedreactor, it is hard to obtain high selectivity at a high reaction conversion due to the furtherdegradation of acrylic acid and acetic acid even though propane was oxidized by the lattice oxygen.The catalytic performance can be improved in the presence of excess propane. Propylene can beoxidized by lattice oxygen of VPO catalyst at 250℃, nevertheless, selectivity to AA and to HAc areeven lower, much more acetic acid was produced (molar ratio of AA to HAc is 0.19:1-0.83:1) thoughthe oxidation products are the same as from propane.
基金support from the U.S.Department of the Army and U.S.Army Future Commandsupport from the U.S.Army Research Laboratory Senior Research Fellowship Program。
文摘The oxygen evolution reaction(OER)is the essential module in energy conversion and storage devices such as electrolyzer,rechargeable metal–air batteries and regenerative fuel cells.The adsorption energy scaling relations between the reaction intermediates,however,impose a large intrinsic overpotential and sluggish reaction kinetics on OER catalysts.Developing advanced electrocatalysts with high activity and stability based on non-noble metal materials is still a grand challenge.Central to the rational design of novel and high-efficiency catalysts is the development and understanding of quantitative structure–activity relationships,which correlate the catalytic activities with structural and electronic descriptors.This paper comprehensively reviews the benchmark descriptors for OER electrolysis,aiming to give an in-depth understanding on the origins of the electrocatalytic activity of the OER and further contribute to building the theory of electrocatalysis.Meanwhile,the cutting-edge research frontiers for proposing new OER paradigms and crucial strategies to circumvent the scaling relationship are also summarized.Challenges,opportunities and perspectives are discussed,intending to shed some light on the rational design concepts and advance the development of more efficient catalysts for enhancing OER performance.
基金the financial supports of National Natural Science Foundation of China(21406152)Research Project Supported by Shanxi Scholarship Council of China(2014-028)Shanxi Coal Based Key Scientific and Technological Project(MJH2014-02,MJH2015-04)
文摘Ceria-zirconia solid solution has been prepared by the urea grind combustion and citric acid sol-gel methods for catalytic applications as oxygen storage/release materials in this study. The properties and oxygen storage/release capacities of samples with different Zr contents were characterized and evaluated by X-ray diffraction（XRD）, Nadsorption, scanning electron microscopy（SEM）, Raman spectroscopy, and insitu CO–COlooping test. The results demonstrate that the samples prepared by two methods are all of excellent lattice [O] release/storage properties and maintain good long-term cycle stability. But the preparation method significantly impacts the homogeneity of samples related to their redox properties and the content of Zr over 20%, which greatly changed the properties of ceria-zirconia solid solutions and caused their changing of crystalline symmetry from cubic to tetragonal. The samples prepared by citric acid solgel method are of more homogeneous particle sizes and higher specific surface areas than that by urea grind combustion method, which is benefit to the oxygen release rather than oxygen storage. The bulk oxygen amount migrated to surface increases with the increasing Zr content, however, the amount of lattice oxygen migration decreases when Zr content is over 20%. When Zr content is 20%, the differences of storage/release capacities from two different preparation methods are reduced at high temperature in the long-term loop reaction.
基金supported by the Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202200550)the Natural Science Foundation Joint Fund for Innovation and Development of Chongqing Municipal Education Commission(CSTB2022NSCQ-LZX0077)+4 种基金the National Natural Science Foundation of China(No.52100065)the Science and Technology Research Program of Natural Science Foundation of Chongqing(cstc2021ycjh-bgzxm0037)the Science and Technology Research Program of Chongqing Municipal Education Commission(KJZD-M202200503)the Chongqing Innovation Research Group Project(No.CXQT21015)the Doctor Start/Talent Introduction Program of Chongqing Normal University(No.02060404/2020009000321)。
文摘Transition metal chalcogenides(TMCs)are recognized as pre-catalysts,and their(oxy)hydroxides derived from electrochemical reconstruction are the active species in the water oxidation.However,understanding the role of the residual chalcogen in the reconstructed layer is lacking in detail,and the corresponding catalytic mechanism remains controversial.Here,taking Cu_(1-x)Co_(x)S as a platform,we explore the regulating effect and existence form of the residual S doped into the reconstructive layer for oxygen evolution reaction(OER),where a dual-path OER mechanism is proposed.First-principles calculations and operando~(18)O isotopic labeling experiments jointly reveal that the residual S in the reconstructive layer of Cu_(1-x)Co_(x)S can wisely balance the adsorbate evolution mechanism(AEM)and lattice oxygen oxidation mechanism(LOM)by activating lattice oxygen and optimizing the adsorption/desorption behaviors at metal active sites,rather than change the reaction mechanism from AEM to LOM.Following such a dual-path OER mechanism,Cu_(0.4)Co_(0.6)S-derived Cu_(0.4)Co_(0.6)OSH not only overcomes the restriction of linear scaling relationship in AEM,but also avoids the structural collapse caused by lattice oxygen migration in LOM,so as to greatly reduce the OER potential and improved stability.
基金funded by the Key R&D Program of Jilin Province(20220201132GX)the Key R&D Program of Hubei Province(2022BAA084)the Open Funds of the State Key Laboratory of Rare Earth Resource Utilization(RERU2023008)。
文摘Ultra-high nickel cobalt-free lithium layered oxides are promising cathode material for lithium-ion batteries(LIBs)because of their relatively high capacity and low cost.Nevertheless,the high nickel content would induce bulk structure degradation and interfacial environment deterioration,and the absence of Co element reduces the lithium diffusion kinetics,severely limiting the performance liberation of this kind of cathodes.Herein,a multifunctional Ti/Zr dual cation co-doping strategy has been employed to improve the lithium storage performance of LiNi_(0.9)Mn_(0.1)O_(2)(NM91)cathode.On the one hand,the Ti/Zr co-doping weakens the Li^(+)/Ni^(2+)mixing through magnetic interactions due to the inexistence of unpaired electrons for Ti^(4+)and Zr^(4+),increasing the lithium diffusion rate and suppressing the harmful coexistence of H1 and H2 phases.On the other hand,they enhance the lattice oxygen stability because of the strong Ti-O and Zr-O bonds,inhibiting the undesired H3 phase transition and lattice oxygen loss,improving the bulk structure and cathode-electrolyte interface stability.As a result,the Ti/Zr co-doped NM91(NMTZ)exhibits a 91.2%capacity retention rate after 100 cycles,while that of NM91 is only82.9%.Also,the NMTZ displays better rate performance than NM91 with output capacities of 115 and93 mA h g^(-1)at a high current density of 5 C,respectively.Moreover,the designed NMTZ could enable the full battery to deliver an energy density up to 263 W h kg^(-1),making the ultra-high nickel cobaltfree lithium layered oxide cathode closer to practical applications.
基金funded by the project from the national natural science foundation of China(21805018 and 21878195)the applied basic research project of Sichuan science and technology department(2020YJ0134)the everest scientific research program of chengdu university of technology。
文摘Li-rich layered transition metal oxides are one of the most promising cathode materials for their high energy density.However,the cathodes usually suffer from severe potential dropping and capacity fading during cycling,which are associated with the surface oxygen release and accompanied by cation densification and structural collapse.Herein,an integrative approach of simultaneous constructing uniform 3d Fe-ion doping in the transition metal layer and Li-rich Li_(5)FeO_(4) shell to grab the oxygen and prevent interfacial side reactions is proposed.The introduction of Fe induces higher redox potential and stronger 3 d Fe-O_(2)p covalent bond,triggering reversible anionic redox via a reductive coupling mechanism.And the delithiated product of Li-rich Li_(5)FeO_(4) not only acts as a protective layer alleviating the side reactions but also enhances the surface kinetic property.With the benefit of promoted reversibility of oxygen redox and enhanced surface stability,the cathode exhibits high reversible capacity and superior cycle performance.Density function theory calculation indicates that the O_(2)p non-bonding state in the cathode incorporated with Fe sits at a lower energy band,resulting in higher energy storage voltage and improved oxygen stability.Consequently,the modified cathode exhibits a discharge specific capacity of 307 m A h g^(-1)(1 C=250 m A g^(-1)),coulombic efficiency of 82.09%in the initial cycle at 0.1 C and 88.34%capacity retention after 100 cycles at 1 C.The work illustrates a strategy that could simultaneously enhance oxygen redox reversibility and interface stability by constructing lattice bond coordination and delithiation induced protective layer to develop Li-rich materials with high reversible capacity and long lifespan.
基金supported by the National Natural Science Fund of China (Nos. 21978246 and 21776234)。
文摘A cost-effective and sustainable noble-metal free catalyst system based on ubiquitously available Mn-Cu bimetallic oxides was served as efficient catalysts for furfural selective oxidation to furancarboxylic acid(FA). Interestingly, Mn_(2)Cu_(1)O_(x)exhibited an excellent furfural conversion of 99% with quantitative selectivity toward FA. Especially, we demonstrate the significant weakening of the Mn-O bonds with the incorporation of CuO into the Mn-Cu oxides, resulting in an improved OLreactivity of Mn_(2)Cu_(1)O_(x), which brings about a higher catalytic activity for furfural oxidation. More importantly, Mn_(2)Cu_(1)O_(x)could exhibit YFA>90% over 5 cycles of reusability test. Through this study, the relationship between the morphology, surface chemistry, and catalytic activity of Mn-Cu bimetallic oxides are elucidated, providing a simple and environmentally friendly catalytic strategy and scientific basis for the development of Mn-Cu bimetallic oxides bioderived molecular aerobic oxidation materials.
基金supported by the Chongzuo Science and Technology Program Project Fund(No.FA20210713)。
文摘High-voltage LiCoO_(2)(LCO)offers a prelude to breaking the bottleneck of the energy density of lithium-ion batteries,however,LiCoO_(2)is subject to serious structural and interfacial degradation above voltages>4.55 V(vs.Li/Li^(+)).Herein,an in-situ Li_(6.25)La_(3)Zr_(2)A_(l0.25)O_(12)(LLZAO)layer is constructed on the LCO surface to achieve operating voltage at 4.6 V.The detailed characterizations(ex-situ XRD,ex-situ Raman,DFT,etc.)reveal that the LLZAO layer greatly enhances Li+conductivity attributed to the ionconducting layer on the surface/interface,and closely combines with LiCoO_(2)particle to ensure stable cathode/electrolyte interface,thus suppressing the highly reactive Co^(4+)and O^(-)triggered surface side reactions at high-voltage.Moreover,the introduction of La^(3+)/Zr^(4+)/Al^(3+)with a larger ionic radius(La^(3+)/Zr^(4+)are larger than Co^(3+))and weaker electronegativity(La/Zr/Al are weaker than Co)into Co^(3+)sites readjusts the electron cloud density between Co–O–Li,which reinforces the Co–O bond and widens the band-center gap of Co 3d and O 2p,thus restraining the detrimental phase transition(from H3 to H1-3 phase)and the formation of Co_(3)O_(4)spinel phase(attributed to lattice oxygen release),subsequently alleviating the particle cracking and structural collapse during repeated Li^(+)de/intercalation.Therefore,after 100 cycles at 3.0–4.6 V,LCO@1.0LLZAO exhibits a superior discharge capacity of 188.5 m A h g^(-1),with a capacity retention of 85.1%.The above research has brought about meaningful guidance for the evolution of cathode materials with high voltage.
基金supported by the Special Project for the Central Government to Guide Local Technological Development (GUIKE ZY20198008)the Guangxi Technology Base and talent Subject (GUIKE AD20238012,AD20297086)+5 种基金the Natural Science Foundation of Guangxi Province (2021GXNSFDA075012)the National Natural Science Foundation of China (51902108,52104298,22169004)the National Natural Science Foundation of China (U20A20249)the Regional Innovation and Development Joint Fundthe Guangxi Innovation Driven Development Subject (GUIKE AA19182020,19254004)the Special Fund for Guangxi Distinguished Expert。
文摘Charging P2-Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)to 4.5 V for higher capacity is enticing.However,it leads to severe capacity fading,ascribing to the lattice oxygen evolution and the P2-O2 phase transformation.Here,the Mg Fe_(2)O_(4) coating and Mg,Fe co-doping were constructed simultaneously by Mg,Fe surface treatment to suppress lattice oxygen evolution and P2-O2 phase transformation of P2-Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)at deep charging.Through ex-situ X-ray diffraction(XRD)tests,we found that the Mg,Fe bulk co-doping could reduce the repulsion between transition metals and Na+/vacancies ordering,thus inhibiting the P2-O2 phase transition and significantly reducing the irreversible volume change of the material.Meanwhile,the internal electric field formed by the dielectric polarization of Mg Fe_(2)O_(4) effectively inhibits the outward migration of oxidized O^(a-)(a<2),thereby suppressing the lattice oxygen evolution at deep charging,confirmed by in situ Raman and ex situ XPS techniques.P2-Na NM@MF-3 shows enhanced high-voltage cycling performance with capacity retentions of 84.8% and 81.3%at 0.1 and 1 C after cycles.This work sheds light on regulating the surface chemistry for Na-layered oxide materials to enhance the high-voltage performance of Na-ion batteries.
