When the machine tool is in the start-and stop-stages,the stick-slip phenomenon will be observed and highprecision positioning,machining accuracy and fretting feed will not be guaranteed. The most critical reason is t...When the machine tool is in the start-and stop-stages,the stick-slip phenomenon will be observed and highprecision positioning,machining accuracy and fretting feed will not be guaranteed. The most critical reason is that there is the difference between the dynamic and the static friction coefficients. Textures with different area ratios are fabricated on the surfaces of the upper PTFE-based composite and the friction tests are carried out on a reciprocating tribotester under the boundary lubrication and flat-on-flat contact conditions. The results show that there exists an optimal textured area ratio of 19.6% that can minimize the difference between the dynamic and the static friction coefficients.展开更多
The surface morphology of buffer layer yttrium-stabilized zirconia （YSZ） of YBa2CuaO7-σ （YBCO） high temperature superconducting films relies on a series of controllable experimental parameters. In this work, we f...The surface morphology of buffer layer yttrium-stabilized zirconia （YSZ） of YBa2CuaO7-σ （YBCO） high temperature superconducting films relies on a series of controllable experimental parameters. In this work, we focus on the influence of pulsed laser frequency and target crystalline type on surface morphology of YSZ films deposited by pulsed laser deposition （PLD） on rolling assisted biaxially textured substrate tapes. Usually two kinds of particles are observed in the YSZ layer： randomly distributed ones on the whole film and self-assembled ones along grain boundaries. SEM images are used to prove that particles can be partly removed when choosing dense targets of single crystalline. Lower frequency of pulsed laser also contributes to a smoother film surface. TEM images are used to view the crystalline structure of thin film. Thus we can obtain a basic understanding of how to prepare a particle-free YSZ buffer layer for YBCO in optimized conditions using PLD. The YBCO layer with nice structure and critical current density of around 5 MA/cm2 can be reached on smooth YSZ samples.展开更多
Superhydrophobic surfaces have attracted extensive interests and researches into their fundamentals and potential applications.Laser texturing provides the convenience to fabricate the hierarchical micro/nanostructure...Superhydrophobic surfaces have attracted extensive interests and researches into their fundamentals and potential applications.Laser texturing provides the convenience to fabricate the hierarchical micro/nanostructures for superhydrophobicity.However,after laser texturing,long wettability transition time from superhydrophilicity to superhydrophobicity is a barrier to mass production and practical industrial applications.External stimuli have been applied to change the surface composition and/or the surface morphology to reduce wettability transition time.Herein,by temperature tuning,wettability transition of laser textured brass surfaces is investigated.Scanning electron microscopy and surface contact angle measurement are employed to characterize the surface morphology and wettability behavior of the textured brass surfaces.By low-temperature heating(100℃~150℃),partial deoxidation of the top Cu O layer occurs to form hydrophobic Cu_2O.Therefore,superhydrophobicity without any chemical coating and surface modification could be achieved in a short time.Furthermore,after low-temperature heating,the low adhesive force between the water droplet and the sample surface is demonstrated for the laser textured brass surface.This study provides a simple method to fabricate the micro/nanostructure surfaces with controllable wettability for the potential applications.展开更多
Super depth digital microscope was employed to observe the macro-/micro-structure of Coleoptera's elytra.The non-smooth surface textures of elytra have shown superior performance of friction reduction and lubricat...Super depth digital microscope was employed to observe the macro-/micro-structure of Coleoptera's elytra.The non-smooth surface textures of elytra have shown superior performance of friction reduction and lubrication.Bionic models of regular hexagonal convex texture and circular concave texture inspired by the beetle were established and verified by numerical calculations and simulations.Further tribological experiments were performed and the results show that the circle texture has the lowest coefficient,which is consistent with the numerical calculations.The research may be further applied to new bionic surface texture designs and also work as a biological template for new bionic inventions.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 51675268)
文摘When the machine tool is in the start-and stop-stages,the stick-slip phenomenon will be observed and highprecision positioning,machining accuracy and fretting feed will not be guaranteed. The most critical reason is that there is the difference between the dynamic and the static friction coefficients. Textures with different area ratios are fabricated on the surfaces of the upper PTFE-based composite and the friction tests are carried out on a reciprocating tribotester under the boundary lubrication and flat-on-flat contact conditions. The results show that there exists an optimal textured area ratio of 19.6% that can minimize the difference between the dynamic and the static friction coefficients.
基金Supported by the ITER Project of the Ministry of Science and Technology of China under Grant No 2011GB113004the Shanghai Commission of Science and Technology under Grant No 11DZ1100402the Youth Fund of the National Natural Science Foundation of China under Grant No 11204174
文摘The surface morphology of buffer layer yttrium-stabilized zirconia （YSZ） of YBa2CuaO7-σ （YBCO） high temperature superconducting films relies on a series of controllable experimental parameters. In this work, we focus on the influence of pulsed laser frequency and target crystalline type on surface morphology of YSZ films deposited by pulsed laser deposition （PLD） on rolling assisted biaxially textured substrate tapes. Usually two kinds of particles are observed in the YSZ layer： randomly distributed ones on the whole film and self-assembled ones along grain boundaries. SEM images are used to prove that particles can be partly removed when choosing dense targets of single crystalline. Lower frequency of pulsed laser also contributes to a smoother film surface. TEM images are used to view the crystalline structure of thin film. Thus we can obtain a basic understanding of how to prepare a particle-free YSZ buffer layer for YBCO in optimized conditions using PLD. The YBCO layer with nice structure and critical current density of around 5 MA/cm2 can be reached on smooth YSZ samples.
基金supported by the National Natural Science Foundation of China (U1609209)Open Program of Laser Precision Machining Engineering Technology Research Center of Fujian Province (2016JZA001)
文摘Superhydrophobic surfaces have attracted extensive interests and researches into their fundamentals and potential applications.Laser texturing provides the convenience to fabricate the hierarchical micro/nanostructures for superhydrophobicity.However,after laser texturing,long wettability transition time from superhydrophilicity to superhydrophobicity is a barrier to mass production and practical industrial applications.External stimuli have been applied to change the surface composition and/or the surface morphology to reduce wettability transition time.Herein,by temperature tuning,wettability transition of laser textured brass surfaces is investigated.Scanning electron microscopy and surface contact angle measurement are employed to characterize the surface morphology and wettability behavior of the textured brass surfaces.By low-temperature heating(100℃~150℃),partial deoxidation of the top Cu O layer occurs to form hydrophobic Cu_2O.Therefore,superhydrophobicity without any chemical coating and surface modification could be achieved in a short time.Furthermore,after low-temperature heating,the low adhesive force between the water droplet and the sample surface is demonstrated for the laser textured brass surface.This study provides a simple method to fabricate the micro/nanostructure surfaces with controllable wettability for the potential applications.
基金supported in part by the National Natural Science Foundation of China(Nos.51175249,51475230)
文摘Super depth digital microscope was employed to observe the macro-/micro-structure of Coleoptera's elytra.The non-smooth surface textures of elytra have shown superior performance of friction reduction and lubrication.Bionic models of regular hexagonal convex texture and circular concave texture inspired by the beetle were established and verified by numerical calculations and simulations.Further tribological experiments were performed and the results show that the circle texture has the lowest coefficient,which is consistent with the numerical calculations.The research may be further applied to new bionic surface texture designs and also work as a biological template for new bionic inventions.
