The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on ...The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on different air layer configurations.By using high-speed camera and dynamic measurement systems,the effects of air layers on the projectile penetration,pressure wave propagation,cavitation evolution,and structural dynamic responses were analyzed.The results showed that the rarefaction wave reflected from the air-liquid interface significantly reduced the peak and specific impulse of the initial pressure wave,thereby diminishing the impact load on the structure.Additionally,the compressibility of air layers also attenuated the cavitation extrusion load.Both front and rear plates exhibited superimposed deformation modes,i.e.,local deformation or petal fracture with global deformation.Air layers effectively mitigated global deformation.However,when the air layer was positioned on the projectile's trajectory,it split the water-entry process and velocity attenuation of the projectile into two relatively independent phases.And the secondary water entry pressure wave caused more severe local deformation and petal fractures on the rear plate.展开更多
The flow behavior and dynamic globularization of TC11 titanium alloy during subtransus deformation are investigated through hot compression tests. A constitutive model is established based on physical-based hardening ...The flow behavior and dynamic globularization of TC11 titanium alloy during subtransus deformation are investigated through hot compression tests. A constitutive model is established based on physical-based hardening model and phenomenological softening model. And based on the recrystallization mechanisms of globularization, the Avrami type kinetics model is established for prediction of globularization fraction and globularized grain size under large strain subtransus deformation of TC11 alloy. As the preliminary application of the previous results, the cogging process of large size TC11 alloy billet is simulated. Based on subroutine development of the DEFORM software, the coupled simulation of one fire cogging process is developed. It shows that the predicted results are in good agreement with the experimental results in forging load and microstructure characteristic, which validates the reliability of the developed FEM subroutine models.展开更多
The irreversible phase transition and interface side reactions during the cycling process severely limit the large scale application of nickel-rich layered oxides Li[Ni_(x)Co_(y)Mn_(1−x−y)]O_(2)(NCM,x>0.8).Herein,w...The irreversible phase transition and interface side reactions during the cycling process severely limit the large scale application of nickel-rich layered oxides Li[Ni_(x)Co_(y)Mn_(1−x−y)]O_(2)(NCM,x>0.8).Herein,we have designed LiNi_(0.8)Co_(0.1)Mn 0.1 O_(2)cathodes modified by Nb/Al co-doping and LiNbO_(3)/LiAlO_(2)composite coating.Detailed characterization reveals that Nb/Al co-doping can stabilize the crystal structure of the cathodes and expand the layer spacing of the layered lattice,thereby increasing the diffusion rate and reversibility of Li^(+).And the composite coatings can improve the electrochemical kinetic and inhibit the erosion of acidic substances by hindering direct contact between the cathodes and electrolyte.As a result,the Ni-rich cathodes with dual modification can still exhibit a higher capacity of 184.02 mA·h/g after 100 cycles with a capacity retention of up to 98.1%,and can still release a capacity of 161.6 mA·h/g at a high rate of 7 C,meanwhile,it shows excellent thermal stability compared to bare NCM.This work provides a new perspective for enhancing electrochemical properties of cathodes through integrated strategies.展开更多
Fine-grained 01420 Al-Li alloy sheets were produced by thermo-mechanical processing based on the mechanism of particle stimulated nucleation of recrystallization.The thermo-mechanically processed sheets were observed ...Fine-grained 01420 Al-Li alloy sheets were produced by thermo-mechanical processing based on the mechanism of particle stimulated nucleation of recrystallization.The thermo-mechanically processed sheets were observed to contain layers of different microstructures along the thickness.The precipitate behavior of the second phase particles and their effects on the distribution of dislocations and layered recrystallized grain structure were analyzed by optical microscopy(OM),scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray diffractometry(XRD).The formation mechanism of the gradient particles was discussed.The results show that after aging,a gradient distribution of large particles along the thickness is observed,the particles in the surface layer(SL) are distributed homogeneously,whereas those in the center layer(CL) are mainly distributed parallel to the rolling direction,and the volume fraction of the particles in the SL is higher than that in the CL.Subsequent rolling in the presence of layer-distributed particles results in a corresponding homogeneous distribution of highly strained regions in the SL and a banded distribution of them in CL,which is the main reason for the formation of layered grain structure along the thickness in the sheets.展开更多
Low-cost catalysts with high activity are in immediate demand for energy storage and conversion devices.In this study,polyvinyl pyrrolidone was used as a complexing agent to synthesize La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)...Low-cost catalysts with high activity are in immediate demand for energy storage and conversion devices.In this study,polyvinyl pyrrolidone was used as a complexing agent to synthesize La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)perovskite oxide.The obtained porous layered LSCF has a large specific surface area of 23.74 m^(2)/g,four times higher than that prepared by the traditional sol-gel method(5.08 m^(2)/g).The oxygen reduction reaction activity of the oxide in 0.1 mol/L KOH solution was studied using a rotating ring-disk electrode.In the tests,the initial potential of 0.88 V(vs.reversible hydrogen electrode)and the limiting diffusion current density of 5.02 mA/cm^(2)were obtained at 1600 r/min.Therefore,higher catalytic activity and stability were demonstrated,compared with the preparation of LSCF perovskite oxide by the traditional method.展开更多
FePt granular films were prepared by direct current facing-target magnetron sputtering system onto glass substrates and subsequently in-situ annealed in vacuum. Vibrating sample magnetometer, X-ray diffraction and sca...FePt granular films were prepared by direct current facing-target magnetron sputtering system onto glass substrates and subsequently in-situ annealed in vacuum. Vibrating sample magnetometer, X-ray diffraction and scanning probe microscope were applied to study the magnetic properties, microstructures, morphologies and domain structures of the samples. （FePt）27Ti73 bilayer films were fabricated at various conditions to investigate the effect of Ti on FePt grains. The results show that without Ti matrix layer, FePt films deposited onto the glass substrates are fcc disordered; with addition of Ti matrix layer, FePt/Ti films form a ternary （FePt）27Ti73 alloy possessing fcc and L10 （111） mixed texture. FePt/（FePt）27Ti73 films with perfectly ordered L10（111） structure and unique magnetic properties can be obtained at Ti thickness of 35nm and substrate temperature of 250℃. The maximum coercivity is more than 240kA/m and the squareness ratio is more than 0.9. The obtained results suggest that the granular FePt/（FePt）27Ti73 films can be applicable to ultrahigh-density magnetic recording media.展开更多
It is unpractical to learn the optimal structure of a big Bayesian network(BN)by exhausting the feasible structures,since the number of feasible structures is super exponential on the number of nodes.This paper propos...It is unpractical to learn the optimal structure of a big Bayesian network(BN)by exhausting the feasible structures,since the number of feasible structures is super exponential on the number of nodes.This paper proposes an approach to layer nodes of a BN by using the conditional independence testing.The parents of a node layer only belong to the layer,or layers who have priority over the layer.When a set of nodes has been layered,the number of feasible structures over the nodes can be remarkably reduced,which makes it possible to learn optimal BN structures for bigger sizes of nodes by accurate algorithms.Integrating the dynamic programming(DP)algorithm with the layering approach,we propose a hybrid algorithm—layered optimal learning(LOL)to learn BN structures.Benefitted by the layering approach,the complexity of the DP algorithm reduces to O(ρ2^n?1)from O(n2^n?1),whereρ<n.Meanwhile,the memory requirements for storing intermediate results are limited to O(C k#/k#^2 )from O(Cn/n^2 ),where k#<n.A case study on learning a standard BN with 50 nodes is conducted.The results demonstrate the superiority of the LOL algorithm,with respect to the Bayesian information criterion(BIC)score criterion,over the hill-climbing,max-min hill-climbing,PC,and three-phrase dependency analysis algorithms.展开更多
In this paper,218 long period Rayleigh wave records from 7 seismic station of CDSN are selected.We applied a partitioned waveform inversion to these data in order to construct a 3\|D model of shear velocity down to 40...In this paper,218 long period Rayleigh wave records from 7 seismic station of CDSN are selected.We applied a partitioned waveform inversion to these data in order to construct a 3\|D model of shear velocity down to 400km depth in the crust and upper mantle of Qinghai\|Tibet plateau and Its Adjacent Regions (22°～44°N,70°～110°E).The first step of the waveform inversion used involved the matching of the waveforms of fundamental and highermost Ravleigh waves with waveforms synthesized from stratified models;in the second stage,the 3\|D model was constructed by solve linear constrains equation. The major structural features inferred from the surface waveform inversions can be summarized as follows:(1) There is a great contrast between surface waveform through Qinghai—Thibet plateau and the others.Main frequency of the former is lower than the latter, which indicate the crust depth of Qinghai—Tibet plateau is deeper than the others. In addition,the amplitude of about 30s period and 50s period is lower than both sides,which implied these exist lower velocity layer at about 25km depth and about 50km depth in Qinghai—Tibet plateau Crust.The former is common,the latter was argued because resolution of most method can not prove it.展开更多
Realizing effective enhancement to the structure of interface region between explosive crystals and polymer binder plays a key role in improving the mechanical properties of the current polymer bonded explosives(PBXs)...Realizing effective enhancement to the structure of interface region between explosive crystals and polymer binder plays a key role in improving the mechanical properties of the current polymer bonded explosives(PBXs).Herein,inspired by the structure of natural nacre which possesses outstanding mechanical performance,a kind of nacre-like structural layer is constructed in the interface region of PBXs composites,making use of two-dimensional graphene sheets and one-dimensional bio-macromolecules of cellulose as inorganic and organic building blocks,respectively.Our results reveal that the constructed nacre-like structural layer can effectively improve the interfacial strength and then endow the PBXs composites with significantly enhanced mechanical properties involving of creep resistance,Brazilian strength and fracture toughness,demonstrating the obvious advantage of such bioinspired interface structure design strategy.In addition,the thermal conduction performance of PBXs composites also exhibits noticeable enhancement due to the remarkable phonon transport capability endowed by the asdesigned nacre-like structural layer.We believe this work provides a novel design route to conquer the issue of weak interfacial strength in PBXs composites and greatly increase the comprehensive properties for better meeting the higher requirements proposed to the explosive part of weapon equipment in new era.展开更多
基金the financial support provided by National Natural Science Foundation of China(Grant Nos.52271338,52371342 and 51979277).
文摘The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on different air layer configurations.By using high-speed camera and dynamic measurement systems,the effects of air layers on the projectile penetration,pressure wave propagation,cavitation evolution,and structural dynamic responses were analyzed.The results showed that the rarefaction wave reflected from the air-liquid interface significantly reduced the peak and specific impulse of the initial pressure wave,thereby diminishing the impact load on the structure.Additionally,the compressibility of air layers also attenuated the cavitation extrusion load.Both front and rear plates exhibited superimposed deformation modes,i.e.,local deformation or petal fracture with global deformation.Air layers effectively mitigated global deformation.However,when the air layer was positioned on the projectile's trajectory,it split the water-entry process and velocity attenuation of the projectile into two relatively independent phases.And the secondary water entry pressure wave caused more severe local deformation and petal fractures on the rear plate.
文摘The flow behavior and dynamic globularization of TC11 titanium alloy during subtransus deformation are investigated through hot compression tests. A constitutive model is established based on physical-based hardening model and phenomenological softening model. And based on the recrystallization mechanisms of globularization, the Avrami type kinetics model is established for prediction of globularization fraction and globularized grain size under large strain subtransus deformation of TC11 alloy. As the preliminary application of the previous results, the cogging process of large size TC11 alloy billet is simulated. Based on subroutine development of the DEFORM software, the coupled simulation of one fire cogging process is developed. It shows that the predicted results are in good agreement with the experimental results in forging load and microstructure characteristic, which validates the reliability of the developed FEM subroutine models.
基金Project(2023JJ40759)supported by the Natural Science Foundation of Hunan Province,China。
文摘The irreversible phase transition and interface side reactions during the cycling process severely limit the large scale application of nickel-rich layered oxides Li[Ni_(x)Co_(y)Mn_(1−x−y)]O_(2)(NCM,x>0.8).Herein,we have designed LiNi_(0.8)Co_(0.1)Mn 0.1 O_(2)cathodes modified by Nb/Al co-doping and LiNbO_(3)/LiAlO_(2)composite coating.Detailed characterization reveals that Nb/Al co-doping can stabilize the crystal structure of the cathodes and expand the layer spacing of the layered lattice,thereby increasing the diffusion rate and reversibility of Li^(+).And the composite coatings can improve the electrochemical kinetic and inhibit the erosion of acidic substances by hindering direct contact between the cathodes and electrolyte.As a result,the Ni-rich cathodes with dual modification can still exhibit a higher capacity of 184.02 mA·h/g after 100 cycles with a capacity retention of up to 98.1%,and can still release a capacity of 161.6 mA·h/g at a high rate of 7 C,meanwhile,it shows excellent thermal stability compared to bare NCM.This work provides a new perspective for enhancing electrochemical properties of cathodes through integrated strategies.
基金Project(2006DFA53250) supported by the International Science and Technology Cooperation Program of ChinaProject(2005CB623706) supported by the Major State Basic Research Development Program of China
文摘Fine-grained 01420 Al-Li alloy sheets were produced by thermo-mechanical processing based on the mechanism of particle stimulated nucleation of recrystallization.The thermo-mechanically processed sheets were observed to contain layers of different microstructures along the thickness.The precipitate behavior of the second phase particles and their effects on the distribution of dislocations and layered recrystallized grain structure were analyzed by optical microscopy(OM),scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray diffractometry(XRD).The formation mechanism of the gradient particles was discussed.The results show that after aging,a gradient distribution of large particles along the thickness is observed,the particles in the surface layer(SL) are distributed homogeneously,whereas those in the center layer(CL) are mainly distributed parallel to the rolling direction,and the volume fraction of the particles in the SL is higher than that in the CL.Subsequent rolling in the presence of layer-distributed particles results in a corresponding homogeneous distribution of highly strained regions in the SL and a banded distribution of them in CL,which is the main reason for the formation of layered grain structure along the thickness in the sheets.
基金Project(20192BAB216015)supported by the Science and Technology Program of Jiangxi Province,ChinaProjects(GJJ180464,GJJ171499)supported by the Science and Technology Program of Education Department of Jiangxi Province,China+2 种基金Project(jxxjbs17057)supported by the Scientific Research Foundation of Jiangxi University of Science and Technology,ChinaProject([2018]50)supported by the Key R&D Programs of Science and Technology Project of Ganzhou City,ChinaProject([2017]179)supported by the Science and Technology Project of Ganzhou City,China。
文摘Low-cost catalysts with high activity are in immediate demand for energy storage and conversion devices.In this study,polyvinyl pyrrolidone was used as a complexing agent to synthesize La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)perovskite oxide.The obtained porous layered LSCF has a large specific surface area of 23.74 m^(2)/g,four times higher than that prepared by the traditional sol-gel method(5.08 m^(2)/g).The oxygen reduction reaction activity of the oxide in 0.1 mol/L KOH solution was studied using a rotating ring-disk electrode.In the tests,the initial potential of 0.88 V(vs.reversible hydrogen electrode)and the limiting diffusion current density of 5.02 mA/cm^(2)were obtained at 1600 r/min.Therefore,higher catalytic activity and stability were demonstrated,compared with the preparation of LSCF perovskite oxide by the traditional method.
基金Project(10274018) supported by the National Natural Science Foundation of China project(Z200102) supported the KeyFoundation of Hebei Normal University project(2002116) supported the Foundation Education Department of of Hebei Provin
文摘FePt granular films were prepared by direct current facing-target magnetron sputtering system onto glass substrates and subsequently in-situ annealed in vacuum. Vibrating sample magnetometer, X-ray diffraction and scanning probe microscope were applied to study the magnetic properties, microstructures, morphologies and domain structures of the samples. （FePt）27Ti73 bilayer films were fabricated at various conditions to investigate the effect of Ti on FePt grains. The results show that without Ti matrix layer, FePt films deposited onto the glass substrates are fcc disordered; with addition of Ti matrix layer, FePt/Ti films form a ternary （FePt）27Ti73 alloy possessing fcc and L10 （111） mixed texture. FePt/（FePt）27Ti73 films with perfectly ordered L10（111） structure and unique magnetic properties can be obtained at Ti thickness of 35nm and substrate temperature of 250℃. The maximum coercivity is more than 240kA/m and the squareness ratio is more than 0.9. The obtained results suggest that the granular FePt/（FePt）27Ti73 films can be applicable to ultrahigh-density magnetic recording media.
基金supported by the National Natural Science Foundation of China(61573285)
文摘It is unpractical to learn the optimal structure of a big Bayesian network(BN)by exhausting the feasible structures,since the number of feasible structures is super exponential on the number of nodes.This paper proposes an approach to layer nodes of a BN by using the conditional independence testing.The parents of a node layer only belong to the layer,or layers who have priority over the layer.When a set of nodes has been layered,the number of feasible structures over the nodes can be remarkably reduced,which makes it possible to learn optimal BN structures for bigger sizes of nodes by accurate algorithms.Integrating the dynamic programming(DP)algorithm with the layering approach,we propose a hybrid algorithm—layered optimal learning(LOL)to learn BN structures.Benefitted by the layering approach,the complexity of the DP algorithm reduces to O(ρ2^n?1)from O(n2^n?1),whereρ<n.Meanwhile,the memory requirements for storing intermediate results are limited to O(C k#/k#^2 )from O(Cn/n^2 ),where k#<n.A case study on learning a standard BN with 50 nodes is conducted.The results demonstrate the superiority of the LOL algorithm,with respect to the Bayesian information criterion(BIC)score criterion,over the hill-climbing,max-min hill-climbing,PC,and three-phrase dependency analysis algorithms.
文摘In this paper,218 long period Rayleigh wave records from 7 seismic station of CDSN are selected.We applied a partitioned waveform inversion to these data in order to construct a 3\|D model of shear velocity down to 400km depth in the crust and upper mantle of Qinghai\|Tibet plateau and Its Adjacent Regions (22°～44°N,70°～110°E).The first step of the waveform inversion used involved the matching of the waveforms of fundamental and highermost Ravleigh waves with waveforms synthesized from stratified models;in the second stage,the 3\|D model was constructed by solve linear constrains equation. The major structural features inferred from the surface waveform inversions can be summarized as follows:(1) There is a great contrast between surface waveform through Qinghai—Thibet plateau and the others.Main frequency of the former is lower than the latter, which indicate the crust depth of Qinghai—Tibet plateau is deeper than the others. In addition,the amplitude of about 30s period and 50s period is lower than both sides,which implied these exist lower velocity layer at about 25km depth and about 50km depth in Qinghai—Tibet plateau Crust.The former is common,the latter was argued because resolution of most method can not prove it.
基金the financial support from National Natural Science Foundation of China(Grant No.21875230,22275173,U2030202)。
文摘Realizing effective enhancement to the structure of interface region between explosive crystals and polymer binder plays a key role in improving the mechanical properties of the current polymer bonded explosives(PBXs).Herein,inspired by the structure of natural nacre which possesses outstanding mechanical performance,a kind of nacre-like structural layer is constructed in the interface region of PBXs composites,making use of two-dimensional graphene sheets and one-dimensional bio-macromolecules of cellulose as inorganic and organic building blocks,respectively.Our results reveal that the constructed nacre-like structural layer can effectively improve the interfacial strength and then endow the PBXs composites with significantly enhanced mechanical properties involving of creep resistance,Brazilian strength and fracture toughness,demonstrating the obvious advantage of such bioinspired interface structure design strategy.In addition,the thermal conduction performance of PBXs composites also exhibits noticeable enhancement due to the remarkable phonon transport capability endowed by the asdesigned nacre-like structural layer.We believe this work provides a novel design route to conquer the issue of weak interfacial strength in PBXs composites and greatly increase the comprehensive properties for better meeting the higher requirements proposed to the explosive part of weapon equipment in new era.
