In this paper, we demonstrate the residual phase noise of a few microwave frequency dividers which usually limit the performance of frequency synthesizers. In order to compare these dividers under different operation ...In this paper, we demonstrate the residual phase noise of a few microwave frequency dividers which usually limit the performance of frequency synthesizers. In order to compare these dividers under different operation frequencies, we calculate additional time jitters of these dividers by using the measured phase noise. The time jitters are various from -0.1 fs to 43 fs in a bandwidth from 1 Hz to 100 Hz in dependent of models and operation frequencies. The HMC series frequency dividers exhibit outstanding performance for high operation frequencies, and the time jitters can be sub-fs. The time jitters of SP8401, MC10EP139, and MC100LVEL34 are comparable or even below that of HMC series for low operation frequencies.展开更多
In this paper, the timing jitter in dispersion-managed soliton-like systems with the Caussian pulse is studied by using two methods. Firstly, the derivation of the dynamic equations for the evolution of soliton-like p...In this paper, the timing jitter in dispersion-managed soliton-like systems with the Caussian pulse is studied by using two methods. Firstly, the derivation of the dynamic equations for the evolution of soliton-like parameters and the timing jitter expressions for the dispersion-managed soliton-like systems are carried out by the perturbed variational method. By analysing and simulating these timing jitter expressions, one can find that the timing jitter is induced by the amplified spontaneous emission noise and the frequency shift, etc. Nonlinear gain can suppress the timing jitter. The chirp sign and the filters action have also effects on the total timing jitter. Secondly, the timing jitter is calculated and analysed by using the moment method. The results of the two methods prove to be consistent with each other.展开更多
How to predict the bus arrival time accurately is a crucial problem to be solved in Internet of Vehicle. Existed methods cannot solve the problem effectively for ignoring the traffic delay jitter. In this paper,a thre...How to predict the bus arrival time accurately is a crucial problem to be solved in Internet of Vehicle. Existed methods cannot solve the problem effectively for ignoring the traffic delay jitter. In this paper,a three-stage mixed model is proposed for bus arrival time prediction. The first stage is pattern training. In this stage,the traffic delay jitter patterns(TDJP)are mined by K nearest neighbor and K-means in the historical traffic time data. The second stage is the single-step prediction,which is based on real-time adjusted Kalman filter with a modification of historical TDJP. In the third stage,as the influence of historical law is increasing in long distance prediction,we combine the single-step prediction dynamically with Markov historical transfer model to conduct the multi-step prediction. The experimental results show that the proposed single-step prediction model performs better in accuracy and efficiency than short-term traffic flow prediction and dynamic Kalman filter. The multi-step prediction provides a higher level veracity and reliability in travel time forecasting than short-term traffic flow and historical traffic pattern prediction models.展开更多
Theoretical analysis and experimental measurement of pulse-width fitter of diode laser pulses are presented. The expression of pulse power spectra with all amplitude jitter, timing jitter and pulse-width jitter is ded...Theoretical analysis and experimental measurement of pulse-width fitter of diode laser pulses are presented. The expression of pulse power spectra with all amplitude jitter, timing jitter and pulse-width jitter is deduced. The power spectra with and without pulse-width fitter are that the pulse-width jitter will contribute considerably numerically simulated. The simulation results indicate noise to the pulse power spectrum while the product of pulse width and angular frequency is larger than 1. The experimental measurement of pulse-width fitter of a gain-switched Fabry-Perot laser diode with 2.4 GHz repetition rate is also reported. In comparison of the noise power spectra of the first, fourth and seventh harmonics of the pulse repetition rate, 2.3ps pulse-width jitter is obtained.展开更多
We characterized the dependence of the timing jitter of an InGaAs/InP single-photon avalanche diode on the excess bias voltage（V（ex）） when operated in 1-GHz sinusoidally gated mode.The single-photon avalanche diod...We characterized the dependence of the timing jitter of an InGaAs/InP single-photon avalanche diode on the excess bias voltage（V（ex）） when operated in 1-GHz sinusoidally gated mode.The single-photon avalanche diode was cooled to-30 degrees Celsius.When the V（ex） is too low（0.2 V-0.8 V） or too high（3 V-4.2 V）,the timing jitter is increased with the V（ex）,particularly at high V（ex）.While at middle V（ex）（1 V-2.8 V）,the timing jitter is reduced.Measurements of the timing jitter of the same avalanche diode with pulsed gating show that this effect is likely related to the increase of both the amplitude of the V（ex） and the width of the gate-on time.For the 1-GHz sinusoidally gated detector,the best jitter of 93 ps is achieved with a photon detection efficiency of 21.4%and a dark count rate of -2.08×10 -5 per gate at the V（ex） of 2.8 V.To evaluate the whole performance of the detector,we calculated the noise equivalent power（NEP） and the afterpulse probability（P（ap））.It is found that both NEP and P（ap） increase quickly when the V（ex） is above 2.8 V.At -2.8-V V（ex）,the NEP and P（ap） are -2.06×10-（16）W/Hz-（1/2） and 7.11%,respectively.Therefore,the detector should be operated with V（ex） of 2.8 V to exploit the fast time response,low NEP and low P（ap）.展开更多
基金supported by the National Natural Science Foundation of China under Grant No.91336101 and No.61127901the West Light Foundation of the Chinese Academy of Sciences under Grant No.2013ZD02
文摘In this paper, we demonstrate the residual phase noise of a few microwave frequency dividers which usually limit the performance of frequency synthesizers. In order to compare these dividers under different operation frequencies, we calculate additional time jitters of these dividers by using the measured phase noise. The time jitters are various from -0.1 fs to 43 fs in a bandwidth from 1 Hz to 100 Hz in dependent of models and operation frequencies. The HMC series frequency dividers exhibit outstanding performance for high operation frequencies, and the time jitters can be sub-fs. The time jitters of SP8401, MC10EP139, and MC100LVEL34 are comparable or even below that of HMC series for low operation frequencies.
文摘In this paper, the timing jitter in dispersion-managed soliton-like systems with the Caussian pulse is studied by using two methods. Firstly, the derivation of the dynamic equations for the evolution of soliton-like parameters and the timing jitter expressions for the dispersion-managed soliton-like systems are carried out by the perturbed variational method. By analysing and simulating these timing jitter expressions, one can find that the timing jitter is induced by the amplified spontaneous emission noise and the frequency shift, etc. Nonlinear gain can suppress the timing jitter. The chirp sign and the filters action have also effects on the total timing jitter. Secondly, the timing jitter is calculated and analysed by using the moment method. The results of the two methods prove to be consistent with each other.
基金National Science and Technology Major Project(2016ZX03001025-003)Special Found for Beijing Common Construction Project
文摘How to predict the bus arrival time accurately is a crucial problem to be solved in Internet of Vehicle. Existed methods cannot solve the problem effectively for ignoring the traffic delay jitter. In this paper,a three-stage mixed model is proposed for bus arrival time prediction. The first stage is pattern training. In this stage,the traffic delay jitter patterns(TDJP)are mined by K nearest neighbor and K-means in the historical traffic time data. The second stage is the single-step prediction,which is based on real-time adjusted Kalman filter with a modification of historical TDJP. In the third stage,as the influence of historical law is increasing in long distance prediction,we combine the single-step prediction dynamically with Markov historical transfer model to conduct the multi-step prediction. The experimental results show that the proposed single-step prediction model performs better in accuracy and efficiency than short-term traffic flow prediction and dynamic Kalman filter. The multi-step prediction provides a higher level veracity and reliability in travel time forecasting than short-term traffic flow and historical traffic pattern prediction models.
基金Supported by the National Natural Science Foundation of China under Grant No 60577019, and the Scientific Research Foun- dation （SRF） for the Returned 0verseas Chinese Scholars （R0CS）, State Education Ministry （SEM） under Grant No 20521017002.
文摘Theoretical analysis and experimental measurement of pulse-width fitter of diode laser pulses are presented. The expression of pulse power spectra with all amplitude jitter, timing jitter and pulse-width jitter is deduced. The power spectra with and without pulse-width fitter are that the pulse-width jitter will contribute considerably numerically simulated. The simulation results indicate noise to the pulse power spectrum while the product of pulse width and angular frequency is larger than 1. The experimental measurement of pulse-width fitter of a gain-switched Fabry-Perot laser diode with 2.4 GHz repetition rate is also reported. In comparison of the noise power spectra of the first, fourth and seventh harmonics of the pulse repetition rate, 2.3ps pulse-width jitter is obtained.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11275024,61274024,and 61474123)the Youth Innovation Promotion Association,China(Grant No.2013105)the Ministry of Science and Technology of China(Grant Nos.2013YQ030595-3 and 2011AA120101)
文摘We characterized the dependence of the timing jitter of an InGaAs/InP single-photon avalanche diode on the excess bias voltage（V（ex）） when operated in 1-GHz sinusoidally gated mode.The single-photon avalanche diode was cooled to-30 degrees Celsius.When the V（ex） is too low（0.2 V-0.8 V） or too high（3 V-4.2 V）,the timing jitter is increased with the V（ex）,particularly at high V（ex）.While at middle V（ex）（1 V-2.8 V）,the timing jitter is reduced.Measurements of the timing jitter of the same avalanche diode with pulsed gating show that this effect is likely related to the increase of both the amplitude of the V（ex） and the width of the gate-on time.For the 1-GHz sinusoidally gated detector,the best jitter of 93 ps is achieved with a photon detection efficiency of 21.4%and a dark count rate of -2.08×10 -5 per gate at the V（ex） of 2.8 V.To evaluate the whole performance of the detector,we calculated the noise equivalent power（NEP） and the afterpulse probability（P（ap））.It is found that both NEP and P（ap） increase quickly when the V（ex） is above 2.8 V.At -2.8-V V（ex）,the NEP and P（ap） are -2.06×10-（16）W/Hz-（1/2） and 7.11%,respectively.Therefore,the detector should be operated with V（ex） of 2.8 V to exploit the fast time response,low NEP and low P（ap）.
