A novel control scheme of active disturbance rejection internal model control(ADRIMC) is proposed to improve the anti-interference ability and robustness for the dead-time process. The active anti-interference concept...A novel control scheme of active disturbance rejection internal model control(ADRIMC) is proposed to improve the anti-interference ability and robustness for the dead-time process. The active anti-interference concept is introduced into the internal model control(IMC) by analyzing the relationship between IMC and disturbance observer control(DOB). Further, a design process of disturbance filter is presented to realize the active anti-interference ability for ADRIMC scheme. The disturbance filter is used to estimate an equivalent disturbance consisting of both external disturbances and internal disturbances caused by model mismatches.Simulation results demonstrate that the proposed method possesses a good disturbance rejection performance, though losing some partial dynamic performance. In other words, the proposed method shows a tradeoff between the dynamic performance and the system robust.展开更多
An adaptive internal mode control is proposed to eliminate effectively periodic disturbance with uncertain frequency caused by input error angle of PIGA （Pendulous Integrating Gyro Accelerometer）. An adaptive algori...An adaptive internal mode control is proposed to eliminate effectively periodic disturbance with uncertain frequency caused by input error angle of PIGA （Pendulous Integrating Gyro Accelerometer）. An adaptive algorithm with periodic disturbance frequency identification on line is applied and the internal model controller parameters are adjusted to eliminate disturbance. Then the convergence of this algorithm and the stability of the system are proved by the averaging method. Simulation results verify the proposed scheme can eliminate periodic disturbance and improve the test precision for PIGA effectively.展开更多
The vector control algorithm based on vector space decomposition （VSD） transformation method has a more flexible control freedom, which can control the fundamental and harmonic subspace separately. To this end, a cu...The vector control algorithm based on vector space decomposition （VSD） transformation method has a more flexible control freedom, which can control the fundamental and harmonic subspace separately. To this end, a current vector decoupling control algorithm for six-phase permanent magnet synchronous motor （PMSM） is designed. Using the proposed synchronous rotating coordinate transformation matrix, the fundamental and harmonic components in d-q subspace are changed into direct current （DC） component, only using the traditional proportional integral （PI） controller can meet the non-static difference adjustment, and the controller parameter design method is given by employing intemal model principle. In addition, in order to remove the 5th and 7th harmonic components of stator current, the current PI controller parallel with resonant controller is employed in x-y subspace to realize the specific harmonic component compensation. Simulation results verify the effectiveness of current decoupling vector controller.展开更多
A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary l...A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary loop had two controllers and the primary loop had two controllers.The two secondary loop controllers were designed using IMC technique.They were decoupled completely and could be adjusted independently,which avoided the undesirable influence on performance of the primary controllers.The main controller in the primary loop was devised as a PID using the method of minimum sensitivity,which could guarantee not only the nominal performance but also the robust stability of the system.A setpoint filter was added in the primary loop to improve the tracking performance.All the controllers of the two closed-loops were designed analytically,and could be adjusted and optimized by single parameter respectively.Simulations were carried out on three various processes with time delay,and the results show that the proposed method can provide a better performance of both set-point tracking and disturbance rejection and robustness against parameters perturbation.展开更多
The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance...The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance in comparison to several well-known methods at the same degree of robustness for stable, integrating and unstable processes. For the selection of the closed-loop time constant(τc), a guideline is provided over a broad range of time-delay/time-constant ratios on the basis of the peak of maximum sensitivity(Ms). An analysis has been performed for the uncertainty margin with the different process parameters for the robust controller design. It gives the guideline of the Ms-value settings for the PI controller designs based on the process parameters uncertainty. Furthermore, a relationship has been developed between Ms-value and uncertainty margin with the different process parameters(k, τ and θ). Simulation study has been conducted for the broad class of processes and the controllers are tuned to have the same degree of robustness by measuring the maximum sensitivity, Ms, in order to obtain a reasonable comparison.展开更多
An IMC-PID controller was proposed for unstable second-order time delay system which shows the characteristics of inverse response(RHP zero). A plot of Ms versus λ was suggested to calculate the suitable tuning param...An IMC-PID controller was proposed for unstable second-order time delay system which shows the characteristics of inverse response(RHP zero). A plot of Ms versus λ was suggested to calculate the suitable tuning parameter λ, which provides a trade-off between performance and robustness. Six different forms of process models were selected from literature to show the applicability of the present method. Performance of controller was calculated by ITAE and total variation TV and compared with recently published tuning rules. Undesirable overshoot was removed by using a set-point weighting parameter. Robustness was tested by introducing a perturbation into the various model parameters and closed-loop results show that the designed controller is robust in the case of model uncertainty. The proposed method shows an overall better closed-loop response as compared to other recently reported methods.展开更多
A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approxim...A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approximated by a polynomial model using the least square method. Based on this model and temperatme control implemented using the Dahlin principle, the viscosity of the glue can be maintained at a constant value. Then, the viscosity model of the glue is applied to deriving the droplet mass as the nominal model of the temperature controller. The robustness of the temperature controller is analyzed by applying the small gain theory. The glue supply pressure controller is designed using the consistency control strategy, and the robustness is analyzed. Finall）, simulations and experiments are conducted using a jet dispensing control system. The results show that the proposed control strategy can significantly improve the droplet consistency.展开更多
The 6th Intemational Conference on Control and Automation(ICCA'07)will be held on May 30 to June 1,2007,in Guangzhou,China.The conference is jointly organized by the IEEE Control Systems Chapter,Singapore and IEEE...The 6th Intemational Conference on Control and Automation(ICCA'07)will be held on May 30 to June 1,2007,in Guangzhou,China.The conference is jointly organized by the IEEE Control Systems Chapter,Singapore and IEEE Control Systems Chapter,Guangzhou,China,and spon- sored by South China University of Technology,China and Chinese University of Hong Kong, Hong Kong.It is to create a forum for scientists and practicing engineers throughout the world to present the latest research findings and ideas in the areas of control and automation.展开更多
Conference Theme-Anti-Crime Networking and Systems The 2007 IEEE International Conference on Networking,Sensing and Control will be held in London. The main theme of the conference is anti-crime networking and critica...Conference Theme-Anti-Crime Networking and Systems The 2007 IEEE International Conference on Networking,Sensing and Control will be held in London. The main theme of the conference is anti-crime networking and critical infrastructure.The area of anti- crime networking and critical infrastructure is a fusion of a number of research areas in networking, sensing,human factors,artificial intelligence,operational research,and systems control theory. However,the real challenge is to design anti-crime networking and systems from a holistic perspective; taking into account technical,organizational as well as contextual complexity.A system engineering approach is required to address new problems of this challenging and promising area.This conference will provide a remarkable opportunity for the academic and industrial community to address new challenges and share solutions,and discuss future research directions.It will feature plenary speeches, industrial panel sessions,funding agency panel sessions,interactive sessions,and invited/special sessions.Contributions are expected from academia,industry,EPSRC,EU,DTI,and MoD.Technical topics of the conference include but are not limited to:展开更多
About one year on,international arms control and disarmament appeared to be rebounding to become an issue of great international attention,paralleling the issues of financial crisis and climate change.International nu...About one year on,international arms control and disarmament appeared to be rebounding to become an issue of great international attention,paralleling the issues of financial crisis and climate change.International nuclear disarmament re-dawned with high profile readjustments by the United States in its nuclear arms control policy and tactics.The US and Russia signed a new agreement of bilateral nuclear disarmament.Multilateral nuclear arms control has also softened,and the nuclear security issue loomed large.The Conference on the Review of Nuclear Non-proliferation was held,the main illustration of the adjustment by the US to its arms control policy and tactics.On balance,however,the US arms control and disarmament policies remain largely rhetorical,as its two strategic objectives of nuclear weapon policy--nuclear deterrence and non-proliferation--has been kept intact,and even intensified.展开更多
基金Project(61273132)supported by the National Natural Foundation of ChinaProject(20110010010)supported by Higher School Specialized Research Fund for the Doctoral Program,China
文摘A novel control scheme of active disturbance rejection internal model control(ADRIMC) is proposed to improve the anti-interference ability and robustness for the dead-time process. The active anti-interference concept is introduced into the internal model control(IMC) by analyzing the relationship between IMC and disturbance observer control(DOB). Further, a design process of disturbance filter is presented to realize the active anti-interference ability for ADRIMC scheme. The disturbance filter is used to estimate an equivalent disturbance consisting of both external disturbances and internal disturbances caused by model mismatches.Simulation results demonstrate that the proposed method possesses a good disturbance rejection performance, though losing some partial dynamic performance. In other words, the proposed method shows a tradeoff between the dynamic performance and the system robust.
文摘An adaptive internal mode control is proposed to eliminate effectively periodic disturbance with uncertain frequency caused by input error angle of PIGA （Pendulous Integrating Gyro Accelerometer）. An adaptive algorithm with periodic disturbance frequency identification on line is applied and the internal model controller parameters are adjusted to eliminate disturbance. Then the convergence of this algorithm and the stability of the system are proved by the averaging method. Simulation results verify the proposed scheme can eliminate periodic disturbance and improve the test precision for PIGA effectively.
基金Project(51507188)supported by the National Natural Science Foundation of China
文摘The vector control algorithm based on vector space decomposition （VSD） transformation method has a more flexible control freedom, which can control the fundamental and harmonic subspace separately. To this end, a current vector decoupling control algorithm for six-phase permanent magnet synchronous motor （PMSM） is designed. Using the proposed synchronous rotating coordinate transformation matrix, the fundamental and harmonic components in d-q subspace are changed into direct current （DC） component, only using the traditional proportional integral （PI） controller can meet the non-static difference adjustment, and the controller parameter design method is given by employing intemal model principle. In addition, in order to remove the 5th and 7th harmonic components of stator current, the current PI controller parallel with resonant controller is employed in x-y subspace to realize the specific harmonic component compensation. Simulation results verify the effectiveness of current decoupling vector controller.
基金Project(J11LG02) supported by the Science and Technology Funds of Education Department of Shandong Province,China
文摘A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary loop had two controllers and the primary loop had two controllers.The two secondary loop controllers were designed using IMC technique.They were decoupled completely and could be adjusted independently,which avoided the undesirable influence on performance of the primary controllers.The main controller in the primary loop was devised as a PID using the method of minimum sensitivity,which could guarantee not only the nominal performance but also the robust stability of the system.A setpoint filter was added in the primary loop to improve the tracking performance.All the controllers of the two closed-loops were designed analytically,and could be adjusted and optimized by single parameter respectively.Simulations were carried out on three various processes with time delay,and the results show that the proposed method can provide a better performance of both set-point tracking and disturbance rejection and robustness against parameters perturbation.
基金the support provided by King Abdulaziz City for Science and Technology (KACST) through the "KACST Annual Program" at King Fahd University of Petroleum & Minerals (KFUPM) for funding this work through project number AT-32-41
文摘The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance in comparison to several well-known methods at the same degree of robustness for stable, integrating and unstable processes. For the selection of the closed-loop time constant(τc), a guideline is provided over a broad range of time-delay/time-constant ratios on the basis of the peak of maximum sensitivity(Ms). An analysis has been performed for the uncertainty margin with the different process parameters for the robust controller design. It gives the guideline of the Ms-value settings for the PI controller designs based on the process parameters uncertainty. Furthermore, a relationship has been developed between Ms-value and uncertainty margin with the different process parameters(k, τ and θ). Simulation study has been conducted for the broad class of processes and the controllers are tuned to have the same degree of robustness by measuring the maximum sensitivity, Ms, in order to obtain a reasonable comparison.
基金India (MHRD, India) for providing financial support
文摘An IMC-PID controller was proposed for unstable second-order time delay system which shows the characteristics of inverse response(RHP zero). A plot of Ms versus λ was suggested to calculate the suitable tuning parameter λ, which provides a trade-off between performance and robustness. Six different forms of process models were selected from literature to show the applicability of the present method. Performance of controller was calculated by ITAE and total variation TV and compared with recently published tuning rules. Undesirable overshoot was removed by using a set-point weighting parameter. Robustness was tested by introducing a perturbation into the various model parameters and closed-loop results show that the designed controller is robust in the case of model uncertainty. The proposed method shows an overall better closed-loop response as compared to other recently reported methods.
基金Project(2011CB013104)supported by the National Basic Research Program of China
文摘A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approximated by a polynomial model using the least square method. Based on this model and temperatme control implemented using the Dahlin principle, the viscosity of the glue can be maintained at a constant value. Then, the viscosity model of the glue is applied to deriving the droplet mass as the nominal model of the temperature controller. The robustness of the temperature controller is analyzed by applying the small gain theory. The glue supply pressure controller is designed using the consistency control strategy, and the robustness is analyzed. Finall）, simulations and experiments are conducted using a jet dispensing control system. The results show that the proposed control strategy can significantly improve the droplet consistency.
文摘The 6th Intemational Conference on Control and Automation(ICCA'07)will be held on May 30 to June 1,2007,in Guangzhou,China.The conference is jointly organized by the IEEE Control Systems Chapter,Singapore and IEEE Control Systems Chapter,Guangzhou,China,and spon- sored by South China University of Technology,China and Chinese University of Hong Kong, Hong Kong.It is to create a forum for scientists and practicing engineers throughout the world to present the latest research findings and ideas in the areas of control and automation.
文摘Conference Theme-Anti-Crime Networking and Systems The 2007 IEEE International Conference on Networking,Sensing and Control will be held in London. The main theme of the conference is anti-crime networking and critical infrastructure.The area of anti- crime networking and critical infrastructure is a fusion of a number of research areas in networking, sensing,human factors,artificial intelligence,operational research,and systems control theory. However,the real challenge is to design anti-crime networking and systems from a holistic perspective; taking into account technical,organizational as well as contextual complexity.A system engineering approach is required to address new problems of this challenging and promising area.This conference will provide a remarkable opportunity for the academic and industrial community to address new challenges and share solutions,and discuss future research directions.It will feature plenary speeches, industrial panel sessions,funding agency panel sessions,interactive sessions,and invited/special sessions.Contributions are expected from academia,industry,EPSRC,EU,DTI,and MoD.Technical topics of the conference include but are not limited to:
文摘About one year on,international arms control and disarmament appeared to be rebounding to become an issue of great international attention,paralleling the issues of financial crisis and climate change.International nuclear disarmament re-dawned with high profile readjustments by the United States in its nuclear arms control policy and tactics.The US and Russia signed a new agreement of bilateral nuclear disarmament.Multilateral nuclear arms control has also softened,and the nuclear security issue loomed large.The Conference on the Review of Nuclear Non-proliferation was held,the main illustration of the adjustment by the US to its arms control policy and tactics.On balance,however,the US arms control and disarmament policies remain largely rhetorical,as its two strategic objectives of nuclear weapon policy--nuclear deterrence and non-proliferation--has been kept intact,and even intensified.
