While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and ...While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and numerical study has been carried out to characterize the effect of SCW on transferred impulse and loading magnitude of shallow buried explosives.Firstly,blast tests of shallow buried explosives were conducted,with and without the SCW,to quantitatively assess the blast loading impulse.Subsequently,finite element(FE)simulations were performed and validated against experimental measurement,with good agreement achieved.The validated FE model was then employed to predict the dynamic response of a fully-clamped metallic circular target,subjected to the explosive impact of shallow buried explosives with SCW,and explore the corresponding physical mechanisms.It was demonstrated that shallow buried explosives in saturated soil generate a greater impulse transferred towards the target relative to those in dry soil.The deformation displacement of the target plate is doubled.Increasing the height of SCW results in enhanced center peak deflection of the loaded target,accompanied by subsequent fall,due to the variation of deformation pattern of the loaded target from concentrated load to uniform load.Meanwhile,the presence of SCW increases the blast impulse transferred towards the target by three times.In addition,there exists a threshold value of the burial depth that maximizes the impact impulse.This threshold exhibits a strong sensitivity to SCW height,decreasing with increasing SCW height.An empirical formula for predicting threshold has been provided.Similar conclusions can be drawn for different explosive masses.The results provide technical guidance on blast loading intensity and its spatial distribution considering shallow buried explosives in coast-land battlefields,which can ultimately contribute to better protective designs.展开更多
To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conduc...To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conducted based on the numerical results of two mathematical models,the rigid-body model and fluid-structure interaction model.In addition,the applicable scope of the above two methods,and the structural response characteristics of the projectile have also been investigated.Our results demonstrate that:(1) The impact loads and angular motion of the projectile of the rigid-body method are more likely to exhibit periodic variations due to the periodic tail slap,its range of positive angles of attack is about α<2°.(2) When the projectile undergone significant wetting,a strong coupling effect is observed among wetting,structural deformation,and projectile motion.With the applied projectile shape,it is observed that,when the projectile bends,the final wetting position is that of Part B(cylinder of body).With the occu rrence of this phenomenon,the projectile ballistics beco me completely unstable.(3) The force exerted on the lower surface of the projectile induced by wetting is the primary reason of the destabilization of the projectile traj ectory and structu ral deformation failure.Bending deformation is most likely to appear at the junction of Part C(cone of body) and Part D(tail).The safe angles of attack of the projectile stability are found to be about α≤2°.展开更多
The muzzle blast overpressure induces disturbances in the flow field inside the crew compartment(FFICC)of a truck-mounted howitzer during the artillery firing.This overpressure is the primary factor preventing personn...The muzzle blast overpressure induces disturbances in the flow field inside the crew compartment(FFICC)of a truck-mounted howitzer during the artillery firing.This overpressure is the primary factor preventing personnel from firing artillery within the cab.To investigate the overpressure characteristics of the FFICC,a foreign trade equipment model was used as the research object,and a numerical model was established to analyze the propagation of muzzle blast from the muzzle to the interior of the crew compartment under extreme firing condition.For comparative verification,the muzzle blast experiment included overpressure data from both the flow field outside the crew compartment(FFOCC)and the FFICC,as well as the acceleration data of the crew compartment structure(Str-CC).The research findings demonstrate that the overpressure-time curves of the FFICC exhibit multi-peak characteristics,while the pressure wave shows no significant discontinuity.The enclosed nature of the cab hinders the dissipation of pressure wave energy within the FFICC,leading to sustained high-amplitude overpressure.The frameskin structure helps attenuate the impact of muzzle blast on the FFICC.Conversely,local high overpressure caused by the convex or concave features of the cab's exterior significantly amplifies the overpressure amplitude within the FFICC.展开更多
Objective:Osteoarthritis(OA)and sarcopenia are significant health concerns in the elderly,substantially impacting their daily activities and quality of life.However,the relationship between them remains poorly underst...Objective:Osteoarthritis(OA)and sarcopenia are significant health concerns in the elderly,substantially impacting their daily activities and quality of life.However,the relationship between them remains poorly understood.This study aims to uncover common biomarkers and pathways associated with both OA and sarcopenia.Methods:Gene expression profiles related to OA and sarcopenia were retrieved from the Gene Expression Omnibus(GEO)database.Differentially expressed genes(DEGs)between disease and control groups were identified using R software.Common DEGs were extracted via Venn diagram analysis.Gene ontology(GO)and Kyoto Encyclopedia of Genes and Genomes(KEGG)enrichment analyses were conducted to identify biological processes and pathways associated with shared DEGs.Protein-protein interaction(PPI)networks were constructed,and candidate hub genes were ranked using the maximal clique centrality(MCC)algorithm.Further validation of hub gene expression was performed using 2 independent datasets.Receiver operating characteristic(ROC)curve analysis was used to evaluate the predictive value of key genes for OA and sarcopenia.Mouse models of OA and sarcopenia were established.Hematoxylin-eosin and Safranin O/Fast Green staining were used to validate the OA model.The sarcopenia model was validated via rotarod testing and quadriceps muscle mass measurement.Real-time reverse transcription PCR(real-time RT-PCR)was employed to assess the mRNA expression levels of candidate key genes in both models.Gene set enrichment analysis(GSEA)was conducted to identify pathways associated with the selected shared key genes in both diseases.Results:A total of 89 common DEGs were identified in the gene expression profiles of OA and sarcopenia,including 76 upregulated and 13 downregulated genes.These 89 DEGs were significantly enriched in protein digestion and absorption,the PI3K-Akt signaling pathway,and extracellular matrix-receptor interaction.PPI network analysis and MCC algorithm analysis of the 89 common DEGs identified the top 17 candidate hub genes.Based on the differential expression analysis of these 17 candidate hub genes in the validation datasets,AEBP1 and COL8A2 were ultimately selected as the common key genes for both diseases,both of which showed a significant upregulation trend in the disease groups(all P<0.05).The value of area under the curve(AUC)for AEBP1 and COL8A2 in the OA and sarcopenia datasets were all greater than 0.7,indicating that both genes have potential value in predicting OA and sarcopenia.Real-time RT-PCR results showed that the mRNA expression levels of AEBP1 and COL8A2 were significantly upregulated in the disease groups(all P<0.05),consistent with the results observed in the bioinformatics analysis.GSEA revealed that AEBP1 and COL8A2 were closely related to extracellular matrix-receptor interaction,ribosome,and oxidative phosphorylation in OA and sarcopenia.Conclusion:AEBP1 and COL8A2 have the potential to serve as common biomarkers for OA and sarcopenia.The extracellular matrix-receptor interaction pathway may represent a potential target for the prevention and treatment of both OA and sarcopenia.展开更多
Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision p...Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision payoff functions hinge on individual covariates and the choices of their friends.However,peer pressure would be misidentified and induce a non-negligible bias when incomplete covariates are involved in the game model.For this reason,we develop a generalized constant peer effects model based on homogeneity structure in dynamic social networks.The new model can effectively avoid bias through homogeneity pursuit and can be applied to a wider range of scenarios.To estimate peer pressure in the model,we first present two algorithms based on the initialize expand merge method and the polynomial-time twostage method to estimate homogeneity parameters.Then we apply the nested pseudo-likelihood method and obtain consistent estimators of peer pressure.Simulation evaluations show that our proposed methodology can achieve desirable and effective results in terms of the community misclassification rate and parameter estimation error.We also illustrate the advantages of our model in the empirical analysis when compared with a benchmark model.展开更多
[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,...[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.展开更多
Ice-going ships play a crucial role in polar transportation and resource extraction.Different from the existing modeling approach which assumes that ships remain stationary,dynamic overset grid technology and DFBI(Dyn...Ice-going ships play a crucial role in polar transportation and resource extraction.Different from the existing modeling approach which assumes that ships remain stationary,dynamic overset grid technology and DFBI(Dynamic Fluid-Body Interaction)method are employed in this paper to enable the free-running motion of the ship in modeling.A numerical model capable of simulating a ship navigating through pack ice area is proposed,which uses Computational Fluid Dynamics(CFD)method to solve the flow field and applies the Discrete Element Method(DEM)to simulate ship-ice and ice-ice interactions.Besides,the proposed high-precision method for generating pack ice area can be used in conjunction with the proposed numerical model.By comparing the numerical results with the available model test data and experimental observations,the effectiveness of the numerical model is validated,demonstrating its strong capability of predicting resistance and simulating ship navigation in pack ice,as well as its significant potential and applicability for further studies.展开更多
By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts d...By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts developed thus far still suffer from the issues of much lower activity and metal leaching,which severely hinder their practical application.Here,we demonstrate that incorporating phosphorus(P)atoms into graphitic carbon nitride(PCN)supports facilitates charge transfer from Rh to the PCN support,thus largely enhancing electronic metal-support interactions(EMSIs).In the styrene hydroformylation reaction,the activity of Rh_(1)/PCN single-atom catalysts(SACs)with varying P contents exhibited a volcano-shaped relationship with P doping,where the Rh_(1)/PCN SAC with optimal P doping showed exceptional activity,approximately 5.8-and 3.3-fold greater than that of the Rh_(1)/g-C_(3)N_(4)SAC without P doping and the industrial homogeneous catalyst HRh(CO)(PPh_(3))_(3),respectively.In addition,the optimal Rh_(1)/PCN SAC catalyst also demonstrated largely enhanced multicycle stability without any visible metal aggregation owing to the increased EMSIs,which sharply differed from the severe metal aggregation of large nanoparticles on the Rh_(1)/g-C_(3)N_(4)SAC.Mechan-istic studies revealed that the enhanced catalytic performance could be attributed to electron-deficient Rh species,which reduced CO adsorption while simultaneously promoting alkene adsorption through increased EMSIs.These findings suggest that tuning EMSIs is an effective way to achieve SACs with high activity and durability.展开更多
The reaction of Mg^(2+)and 5-{1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl}terephthalic acid(H_(2)L)leads to two metal-organic frameworks,[Mg(L)(DMF)_(2)(H_(2)O)_(2)]_(2)·5DMF·2H_(2)O(1)with a 1D structure and...The reaction of Mg^(2+)and 5-{1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl}terephthalic acid(H_(2)L)leads to two metal-organic frameworks,[Mg(L)(DMF)_(2)(H_(2)O)_(2)]_(2)·5DMF·2H_(2)O(1)with a 1D structure and[Mg_(2)(L)_(2)(DMSO)_(3)(H_(2)O)](2)with a 2D(4,4)-net structure.Interestingly,the two compounds exhibit distinct luminescent responses to external mechanical stimuli.1 exhibited exceptional resistance mechanical chromic luminescence(RMCL),which can be attributed to the predominant hydrogen bonds and the presence of high-boiling-point solvent molecules within its structure.2 had a reversible MCL property,which can be attributed to the dominantπ-πweak interactions,coupled with the reversible destruction/restoration of its crystallinity under grinding/fumigation.CCDC:2410963,1;2410964,2.展开更多
Two Gd_(2)complexes,namely[Gd_(2)(dbm)_(2)(HL_(1))_(2)(CH_(3)OH)_(2)]·4CH_(3)OH(1)and[Gd_(2)(dbm)_(2)(L_(2))_(2)(CH_(3)OH)_(2)]·2CH_(3)OH(2),where H_(3)L_(1)=(Z)-N'-[4-(diethylamino)-2-hydroxybenzylidene...Two Gd_(2)complexes,namely[Gd_(2)(dbm)_(2)(HL_(1))_(2)(CH_(3)OH)_(2)]·4CH_(3)OH(1)and[Gd_(2)(dbm)_(2)(L_(2))_(2)(CH_(3)OH)_(2)]·2CH_(3)OH(2),where H_(3)L_(1)=(Z)-N'-[4-(diethylamino)-2-hydroxybenzylidene]-2-hydroxyacetohydrazide,H_(2)L_(2)=(E)-N'-(5-bromo-2-hydroxy-3-methoxybenzylidene)nicotinohydrazide,Hdbm=dibenzoylmethane,have been constructed by adopting the solvothermal method.Structural characterization unveils that both complexes 1 and 2 are constituted by two Gd^(3+)ions,two dbm-ions,two CH_(3)OH molecules,and two polydentate Schiff-base ligands(HL_(1)^(2-)or L_(2)^(2-)).In addition,complex 1 contains four free methanol molecules,whereas complex 2 harbors two free methanol molecules.By investigating the interactions between complexes 1 and 2 and four types of bacteria(Bacillus subtilis,Escherichia coli,Staphylococcus aureus,Candida albicans),it was found that both complexes 1 and 2 exhibited potent antibacte-rial activities.The interaction mechanisms between the ligands H_(3)L_(1),H_(2)L_(2),complexes 1 and 2,and calf thymus DNA(CT-DNA)were studied using ultraviolet-visible spectroscopy,fluorescence titration,and cyclic voltammetry.The results demonstrated that both complexes 1 and 2 can intercalate into CT-DNA molecules,thereby inhibiting bacterial proliferation to achieve the antibacterial effects.CCDC:2401116,1;2401117,2.展开更多
In this paper,a scheme of commonly-resonated extended interaction circuit system based on high order TMn,mode is proposed to lock the phases of two extended interaction oscillators(EIOs)for generating high power at G-...In this paper,a scheme of commonly-resonated extended interaction circuit system based on high order TMn,mode is proposed to lock the phases of two extended interaction oscillators(EIOs)for generating high power at G-band.Two separate EIOs are coupled through a specific single-gap coupling field supported by a designed gap waveguide with length Lg,which form the phase-locked EIOs based on the commonly-resonated system.As a whole system,the system has been focused on with mode analysis based on different single-gap coupling fields,mode hopping,which present the variation of phase difference between the two-beam-wave interactions when changing Lg.To demonstrate the effectiveness of the proposed circuit system in producing the phase locking,we conducted particle-in-cell(PIC)simulations to show that the interesting mode hopping occurs with the phase difference of O and r between the output signals from two output ports,corresponding to the excitation of the TMn mode with different n.Simulation results show that 1)the oscillator can deliver two times of the output power obtained from one single oscillator at 220 GHz,2)the two EIOs can still deliver output signals with phase difference of O and when the currents of the two beams are different or the fabrication errors of the two EIO cavities are taken into account.The proposed scheme is promising in extending to phase locking between multiple EIOs,and generating higher power at millimeter-wave and higher frequencies.展开更多
With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Ni...With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.展开更多
Four new coordination polymers,{[Cd(mbtx)(4OHphCOO)]NO_(3)}n(1),{[Zn(mbtx)(1,4-bdc)_(0.5)(H_(2)O)_(2)]·(1,4-bdc)_(0.5)·4H_(2)O}n(2),{[Cd2(mbtx)(5NO_(2)-bdc)_(2)(H_(2)O)_(3)]·4.5H_(2)O}n(3),and{[Zn(H_(2)...Four new coordination polymers,{[Cd(mbtx)(4OHphCOO)]NO_(3)}n(1),{[Zn(mbtx)(1,4-bdc)_(0.5)(H_(2)O)_(2)]·(1,4-bdc)_(0.5)·4H_(2)O}n(2),{[Cd2(mbtx)(5NO_(2)-bdc)_(2)(H_(2)O)_(3)]·4.5H_(2)O}n(3),and{[Zn(H_(2)O)6][Zn_(2)(mbtx)_(2)(btc)_(2)(H_(2)O)_(4)]·2H_(2)O}n(4)(mbtx=1,3-bis(4H-1,2,4-triazole)benzene,4OHphCOO-=p-hydroxybenzoate,1,4-bdc2-=1,4-benzenedicarboxylate,5NO_(2)-bdc2-=5-nitro-isophthalate,btc3-=1,3,5-benzenetricarboxylate),were synthesized under room temperature condition and characterized by single-crystal X-ray diffraction,elemental analyses,and powder X-ray diffraction.Single-crystal X-ray structural analysis shows that complexes 1 and 3 are 2D networks.In 1,the adjacent 2D networks are linked to a 3D network byπ-πstacking interaction.2 and 4 exhibit 1D chains,and the 1D chains are connected into a 3D network byπ-πstacking interaction and intermolecular hydrogen bond.Luminescence and thermogravimetric analysis of the four complexes were discussed.CCDC:2416406,1;2416407,2;2416408,3;2416409,4.展开更多
Background Polygalacturonase inhibiting proteins(PGIPs)play a pivotal role in plant defense against plant patho-gens by inhibiting polygalacturonase(PG),an enzyme produced by pathogens to degrade plant cell wall pecti...Background Polygalacturonase inhibiting proteins(PGIPs)play a pivotal role in plant defense against plant patho-gens by inhibiting polygalacturonase(PG),an enzyme produced by pathogens to degrade plant cell wall pectin.PGIPs,also known as leucine-rich repeat pathogenesis-related(PR)proteins,activate the host’s defense response upon interaction with PG,thereby reinforcing the host defense against plant pathogens attacks.In Egyptian or extra-long staple cotton(Gossypium barbadense),the interaction between PGIP and PG is one of the crucial steps in the defense mechanism against major pathogens such as Xanthomonas citri pv.malvacearum and Alternaria mac-rospora,which are responsible for bacterial leaf blight and leaf spot diseases,respectively.Results To unravel the molecular mechanisms underlying these PR proteins,we conducted a comprehensive study involving molecular modeling,protein-protein docking,site-specific double mutation(E169G and F242K),and molec-ular dynamics simulations.Both wild-type and mutated cotton PGIPs were examined in the interaction with the PG enzyme of a bacterial and fungal pathogen.Our findings revealed that changes in conformations of double-mutated residues in the active site of PGIP lead to the inhibition of PG binding.The molecular dynamics simulation studies provide insights into the dynamic behaviour and stability of the PGIP-PG complexes,shedding light on the intricate details of the inhibitory and exhibitory mechanism against the major fungal and bacterial pathogens of G.barbadense,respectively.Conclusions The findings of this study not only enhance our understanding of the molecular interactions between PGs of Xanthomonas citri pv.malvacearum and Alternaria macrospora and PGIP of G.barbadense but also pre-sent a potential strategy for developing the disease-resistant cotton varieties.By variations in the binding affinities of PGs through specific mutations in PGIP,this research offers promising avenues for the development of enhanced resistance to cotton plants against bacterial leaf blight and leaf spot diseases.展开更多
The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and cen...The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and centrifugal honey separation,expose beekeepers to potential bee stings and frequently compromise honeycomb integrity.To address these limitations,we designed an automated honey-harvesting robot capable of autonomous frame extraction and beeswax removal.The robot mainly consists of a mobile mechanism equipped with image recognition for beehive localization,a magnetic adsorption-based beehive frame handling device(60.8 N maximum suction)coupled with a cross-slide mechanism for precise frame manipulation,and a thermal beeswax layer-melting apparatus,with optimal melting parameters(15 m/s airflow at 90℃ for 30 seconds)determined through rigorous thermal flow simulations utilizing FLUENT/Mechanical software.Field experiments demonstrated beehive frames handling success rate exceeding 85%,beeswax layer removal efficacy over 80% and damage of honeycombs below 30%.The experiment results validate the robot's operational reliability and its capacity to automate critical harvesting procedures.This study significantly reduces the labor intensity for beekeepers,effectively eliminates the risk of direct human-bee contact and improves the removal of beeswax layer,thereby catalyzing the modernization of the beekeeping industry.展开更多
The exploration of unmanned aerial vehicle(UAV)swarm systems represents a focal point in the research of multiagent systems,with the investigation of their fission-fusion behavior holding significant theoretical and p...The exploration of unmanned aerial vehicle(UAV)swarm systems represents a focal point in the research of multiagent systems,with the investigation of their fission-fusion behavior holding significant theoretical and practical value.This review systematically examines the methods for fission-fusion of UAV swarms from the perspective of multi-agent systems,encompassing the composition of UAV swarm systems and fission-fusion conditions,information interaction mechanisms,and existing fission-fusion approaches.Firstly,considering the constituent units of UAV swarms and the conditions influencing fission-fusion,this paper categorizes and introduces the UAV swarm systems.It further examines the effects and limitations of fission-fusion methods across various categories and conditions.Secondly,a comprehensive analysis of the prevalent information interaction mechanisms within UAV swarms is conducted from the perspective of information interaction structures.The advantages and limitations of various mechanisms in the context of fission-fusion behaviors are summarized and synthesized.Thirdly,this paper consolidates the existing implementation research findings related to the fission-fusion behavior of UAV swarms,identifies unresolved issues in fission-fusion research,and discusses potential solutions.Finally,the paper concludes with a comprehensive summary and systematically outlines future research opportunities.展开更多
Verticillium wilt,caused by the infamous pathogen Verticillium dahliae,presents a primary constraint on cotton cul-tivation worldwide.The complexity of disease resistance in cotton and the largely unexplored interacti...Verticillium wilt,caused by the infamous pathogen Verticillium dahliae,presents a primary constraint on cotton cul-tivation worldwide.The complexity of disease resistance in cotton and the largely unexplored interaction dynamics between the cotton plant host and V.dahliae pathogen pose a crucial predicament for effectively managing cotton Verticillium wilt.Nevertheless,the most cost-effective approach to controlling this disease involves breeding and cul-tivating resistant cotton varieties,demanding a meticulous analysis of the mechanisms underlying cotton’s resistance to Verticillium wilt and the identification of pivotal genes.These aspects constitute focal points in disease-resistance breeding programs.In this review,we comprehensively discuss genetic inheritance associated with Verticillium wilt resistance in cotton,the advancements in molecular markers for disease resistance,the functional investiga-tion of resistance genes in cotton,the analysis of pathogenicity genes in V.dahliae,as well as the intricate interplay between cotton and this fungus.Moreover,we delve into the future prospects of cutting-edge research on cotton Verticillium wilt,aiming to proffer valuable insights for the effective management of this devastating fungus.展开更多
Plum blossom pile is a new type of special-shaped pile, which is proposed based on the principle of maximum perimeter with the same cross-sectional area. To advance this technique, primarily for the design of plum blo...Plum blossom pile is a new type of special-shaped pile, which is proposed based on the principle of maximum perimeter with the same cross-sectional area. To advance this technique, primarily for the design of plum blossom piles, it is important to investigate the skin friction behavior of plum blossom pile foundations precluding any straightforward constitutive model. In this work, an analytic method dependent on the cross-sectional geometry and the vertical shearing effects is proposed by means of equilibrium analysis to calculate the effective vertical stress in the surrounding soil, the skin friction/negative skin friction, and the axial force/dragload of a plum blossom pile. Additionally, the curves of skin friction of piles are investigated with the same conditions. The results show that the curves of skin friction of piles deduced according to the developed analytic method agree well with the FEM results and related literature solution, which validates the solution. The axial force of the pile decreases with the increase of the shear action coefficient in the buried depth direction under the vertical concentrated load when considering the vertical shearing effects on the pile-soil interfaces.展开更多
High complexity and uncertainty of air combat pose significant challenges to target intention prediction.Current interpolation methods for data pre-processing and wrangling have limitations in capturing interrelations...High complexity and uncertainty of air combat pose significant challenges to target intention prediction.Current interpolation methods for data pre-processing and wrangling have limitations in capturing interrelationships among intricate variable patterns.Accordingly,this study proposes a Mogrifier gate recurrent unit-D(Mog-GRU-D)model to address the com-bat target intention prediction issue under the incomplete infor-mation condition.The proposed model directly processes miss-ing data while reducing the independence between inputs and output states.A total of 1200 samples from twelve continuous moments are captured through the combat simulation system,each of which consists of seven dimensional features.To bench-mark the experiment,a missing valued dataset has been gener-ated by randomly removing 20%of the original data.Extensive experiments demonstrate that the proposed model obtains the state-of-the-art performance with an accuracy of 73.25%when dealing with incomplete information.This study provides possi-ble interpretations for the principle of target interactive mecha-nism,highlighting the model’s effectiveness in potential air war-fare implementation.展开更多
In the practical slope engineering,the stability of lower sliding mass(region A)with back tensile cracks of the jointed rock slope attracts more attentions,but the upper rock mass(region B)may also be unstable.Therefo...In the practical slope engineering,the stability of lower sliding mass(region A)with back tensile cracks of the jointed rock slope attracts more attentions,but the upper rock mass(region B)may also be unstable.Therefore,in this study,based on the stepped failure mode of bedding jointed rock slopes,considering the influence of the upper rock mass on the lower stepped sliding mass,the improved failure model for analyzing the interaction force(F_(AB))between two regions is constructed,and the safety factors(F_(S))of two regions and whole region are derived.In addition,this paper proposes a method to determine the existence of F_(AB) using their respective acceleration values(a_(A) and a_(B))when regions A and B are unstable.The influences of key parameters on two regions and the whole region are analyzed.The results show that the variation of the F_(AB) and F_(S) of two regions can be obtained accurately based on the improved failure model.The accuracy of the improved failure model is verified by comparative analysis.The research results can explain the interaction mechanism of two regions and the natural phenomenon of slope failure caused by the development of cracks.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12002156,11972185,12372136)Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(Grant No.MCMS-I-0222K01)。
文摘While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and numerical study has been carried out to characterize the effect of SCW on transferred impulse and loading magnitude of shallow buried explosives.Firstly,blast tests of shallow buried explosives were conducted,with and without the SCW,to quantitatively assess the blast loading impulse.Subsequently,finite element(FE)simulations were performed and validated against experimental measurement,with good agreement achieved.The validated FE model was then employed to predict the dynamic response of a fully-clamped metallic circular target,subjected to the explosive impact of shallow buried explosives with SCW,and explore the corresponding physical mechanisms.It was demonstrated that shallow buried explosives in saturated soil generate a greater impulse transferred towards the target relative to those in dry soil.The deformation displacement of the target plate is doubled.Increasing the height of SCW results in enhanced center peak deflection of the loaded target,accompanied by subsequent fall,due to the variation of deformation pattern of the loaded target from concentrated load to uniform load.Meanwhile,the presence of SCW increases the blast impulse transferred towards the target by three times.In addition,there exists a threshold value of the burial depth that maximizes the impact impulse.This threshold exhibits a strong sensitivity to SCW height,decreasing with increasing SCW height.An empirical formula for predicting threshold has been provided.Similar conclusions can be drawn for different explosive masses.The results provide technical guidance on blast loading intensity and its spatial distribution considering shallow buried explosives in coast-land battlefields,which can ultimately contribute to better protective designs.
基金supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0714).
文摘To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conducted based on the numerical results of two mathematical models,the rigid-body model and fluid-structure interaction model.In addition,the applicable scope of the above two methods,and the structural response characteristics of the projectile have also been investigated.Our results demonstrate that:(1) The impact loads and angular motion of the projectile of the rigid-body method are more likely to exhibit periodic variations due to the periodic tail slap,its range of positive angles of attack is about α<2°.(2) When the projectile undergone significant wetting,a strong coupling effect is observed among wetting,structural deformation,and projectile motion.With the applied projectile shape,it is observed that,when the projectile bends,the final wetting position is that of Part B(cylinder of body).With the occu rrence of this phenomenon,the projectile ballistics beco me completely unstable.(3) The force exerted on the lower surface of the projectile induced by wetting is the primary reason of the destabilization of the projectile traj ectory and structu ral deformation failure.Bending deformation is most likely to appear at the junction of Part C(cone of body) and Part D(tail).The safe angles of attack of the projectile stability are found to be about α≤2°.
基金supported by the National Natural Science Foundation of China(Grant No.U2341269)。
文摘The muzzle blast overpressure induces disturbances in the flow field inside the crew compartment(FFICC)of a truck-mounted howitzer during the artillery firing.This overpressure is the primary factor preventing personnel from firing artillery within the cab.To investigate the overpressure characteristics of the FFICC,a foreign trade equipment model was used as the research object,and a numerical model was established to analyze the propagation of muzzle blast from the muzzle to the interior of the crew compartment under extreme firing condition.For comparative verification,the muzzle blast experiment included overpressure data from both the flow field outside the crew compartment(FFOCC)and the FFICC,as well as the acceleration data of the crew compartment structure(Str-CC).The research findings demonstrate that the overpressure-time curves of the FFICC exhibit multi-peak characteristics,while the pressure wave shows no significant discontinuity.The enclosed nature of the cab hinders the dissipation of pressure wave energy within the FFICC,leading to sustained high-amplitude overpressure.The frameskin structure helps attenuate the impact of muzzle blast on the FFICC.Conversely,local high overpressure caused by the convex or concave features of the cab's exterior significantly amplifies the overpressure amplitude within the FFICC.
基金supported by the National Natural Science Foundation of China(82060418).
文摘Objective:Osteoarthritis(OA)and sarcopenia are significant health concerns in the elderly,substantially impacting their daily activities and quality of life.However,the relationship between them remains poorly understood.This study aims to uncover common biomarkers and pathways associated with both OA and sarcopenia.Methods:Gene expression profiles related to OA and sarcopenia were retrieved from the Gene Expression Omnibus(GEO)database.Differentially expressed genes(DEGs)between disease and control groups were identified using R software.Common DEGs were extracted via Venn diagram analysis.Gene ontology(GO)and Kyoto Encyclopedia of Genes and Genomes(KEGG)enrichment analyses were conducted to identify biological processes and pathways associated with shared DEGs.Protein-protein interaction(PPI)networks were constructed,and candidate hub genes were ranked using the maximal clique centrality(MCC)algorithm.Further validation of hub gene expression was performed using 2 independent datasets.Receiver operating characteristic(ROC)curve analysis was used to evaluate the predictive value of key genes for OA and sarcopenia.Mouse models of OA and sarcopenia were established.Hematoxylin-eosin and Safranin O/Fast Green staining were used to validate the OA model.The sarcopenia model was validated via rotarod testing and quadriceps muscle mass measurement.Real-time reverse transcription PCR(real-time RT-PCR)was employed to assess the mRNA expression levels of candidate key genes in both models.Gene set enrichment analysis(GSEA)was conducted to identify pathways associated with the selected shared key genes in both diseases.Results:A total of 89 common DEGs were identified in the gene expression profiles of OA and sarcopenia,including 76 upregulated and 13 downregulated genes.These 89 DEGs were significantly enriched in protein digestion and absorption,the PI3K-Akt signaling pathway,and extracellular matrix-receptor interaction.PPI network analysis and MCC algorithm analysis of the 89 common DEGs identified the top 17 candidate hub genes.Based on the differential expression analysis of these 17 candidate hub genes in the validation datasets,AEBP1 and COL8A2 were ultimately selected as the common key genes for both diseases,both of which showed a significant upregulation trend in the disease groups(all P<0.05).The value of area under the curve(AUC)for AEBP1 and COL8A2 in the OA and sarcopenia datasets were all greater than 0.7,indicating that both genes have potential value in predicting OA and sarcopenia.Real-time RT-PCR results showed that the mRNA expression levels of AEBP1 and COL8A2 were significantly upregulated in the disease groups(all P<0.05),consistent with the results observed in the bioinformatics analysis.GSEA revealed that AEBP1 and COL8A2 were closely related to extracellular matrix-receptor interaction,ribosome,and oxidative phosphorylation in OA and sarcopenia.Conclusion:AEBP1 and COL8A2 have the potential to serve as common biomarkers for OA and sarcopenia.The extracellular matrix-receptor interaction pathway may represent a potential target for the prevention and treatment of both OA and sarcopenia.
基金supported by the National Nature Science Foundation of China(71771201,72531009,71973001)the USTC Research Funds of the Double First-Class Initiative(FSSF-A-240202).
文摘Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision payoff functions hinge on individual covariates and the choices of their friends.However,peer pressure would be misidentified and induce a non-negligible bias when incomplete covariates are involved in the game model.For this reason,we develop a generalized constant peer effects model based on homogeneity structure in dynamic social networks.The new model can effectively avoid bias through homogeneity pursuit and can be applied to a wider range of scenarios.To estimate peer pressure in the model,we first present two algorithms based on the initialize expand merge method and the polynomial-time twostage method to estimate homogeneity parameters.Then we apply the nested pseudo-likelihood method and obtain consistent estimators of peer pressure.Simulation evaluations show that our proposed methodology can achieve desirable and effective results in terms of the community misclassification rate and parameter estimation error.We also illustrate the advantages of our model in the empirical analysis when compared with a benchmark model.
基金National Key Research and Development Program of China(2022YFF0707602)National Natural Science Foundation of China(62471097,62471115,62471101)National Natural Science Foundation of Sichuan(2025ZNSFSC0537)。
文摘[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.
文摘Ice-going ships play a crucial role in polar transportation and resource extraction.Different from the existing modeling approach which assumes that ships remain stationary,dynamic overset grid technology and DFBI(Dynamic Fluid-Body Interaction)method are employed in this paper to enable the free-running motion of the ship in modeling.A numerical model capable of simulating a ship navigating through pack ice area is proposed,which uses Computational Fluid Dynamics(CFD)method to solve the flow field and applies the Discrete Element Method(DEM)to simulate ship-ice and ice-ice interactions.Besides,the proposed high-precision method for generating pack ice area can be used in conjunction with the proposed numerical model.By comparing the numerical results with the available model test data and experimental observations,the effectiveness of the numerical model is validated,demonstrating its strong capability of predicting resistance and simulating ship navigation in pack ice,as well as its significant potential and applicability for further studies.
基金supported by the Petrochemical Research Institute Foundation(21-CB-09-01)the National Natural Science Foundation of China(22302186,22025205)+1 种基金the China Postdoctoral Science Foundation(2022M713030,2023T160618)the Fundamental Research Funds for the Central Universities(WK2060000058,WK2060000038).
文摘By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts developed thus far still suffer from the issues of much lower activity and metal leaching,which severely hinder their practical application.Here,we demonstrate that incorporating phosphorus(P)atoms into graphitic carbon nitride(PCN)supports facilitates charge transfer from Rh to the PCN support,thus largely enhancing electronic metal-support interactions(EMSIs).In the styrene hydroformylation reaction,the activity of Rh_(1)/PCN single-atom catalysts(SACs)with varying P contents exhibited a volcano-shaped relationship with P doping,where the Rh_(1)/PCN SAC with optimal P doping showed exceptional activity,approximately 5.8-and 3.3-fold greater than that of the Rh_(1)/g-C_(3)N_(4)SAC without P doping and the industrial homogeneous catalyst HRh(CO)(PPh_(3))_(3),respectively.In addition,the optimal Rh_(1)/PCN SAC catalyst also demonstrated largely enhanced multicycle stability without any visible metal aggregation owing to the increased EMSIs,which sharply differed from the severe metal aggregation of large nanoparticles on the Rh_(1)/g-C_(3)N_(4)SAC.Mechan-istic studies revealed that the enhanced catalytic performance could be attributed to electron-deficient Rh species,which reduced CO adsorption while simultaneously promoting alkene adsorption through increased EMSIs.These findings suggest that tuning EMSIs is an effective way to achieve SACs with high activity and durability.
文摘The reaction of Mg^(2+)and 5-{1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl}terephthalic acid(H_(2)L)leads to two metal-organic frameworks,[Mg(L)(DMF)_(2)(H_(2)O)_(2)]_(2)·5DMF·2H_(2)O(1)with a 1D structure and[Mg_(2)(L)_(2)(DMSO)_(3)(H_(2)O)](2)with a 2D(4,4)-net structure.Interestingly,the two compounds exhibit distinct luminescent responses to external mechanical stimuli.1 exhibited exceptional resistance mechanical chromic luminescence(RMCL),which can be attributed to the predominant hydrogen bonds and the presence of high-boiling-point solvent molecules within its structure.2 had a reversible MCL property,which can be attributed to the dominantπ-πweak interactions,coupled with the reversible destruction/restoration of its crystallinity under grinding/fumigation.CCDC:2410963,1;2410964,2.
文摘Two Gd_(2)complexes,namely[Gd_(2)(dbm)_(2)(HL_(1))_(2)(CH_(3)OH)_(2)]·4CH_(3)OH(1)and[Gd_(2)(dbm)_(2)(L_(2))_(2)(CH_(3)OH)_(2)]·2CH_(3)OH(2),where H_(3)L_(1)=(Z)-N'-[4-(diethylamino)-2-hydroxybenzylidene]-2-hydroxyacetohydrazide,H_(2)L_(2)=(E)-N'-(5-bromo-2-hydroxy-3-methoxybenzylidene)nicotinohydrazide,Hdbm=dibenzoylmethane,have been constructed by adopting the solvothermal method.Structural characterization unveils that both complexes 1 and 2 are constituted by two Gd^(3+)ions,two dbm-ions,two CH_(3)OH molecules,and two polydentate Schiff-base ligands(HL_(1)^(2-)or L_(2)^(2-)).In addition,complex 1 contains four free methanol molecules,whereas complex 2 harbors two free methanol molecules.By investigating the interactions between complexes 1 and 2 and four types of bacteria(Bacillus subtilis,Escherichia coli,Staphylococcus aureus,Candida albicans),it was found that both complexes 1 and 2 exhibited potent antibacte-rial activities.The interaction mechanisms between the ligands H_(3)L_(1),H_(2)L_(2),complexes 1 and 2,and calf thymus DNA(CT-DNA)were studied using ultraviolet-visible spectroscopy,fluorescence titration,and cyclic voltammetry.The results demonstrated that both complexes 1 and 2 can intercalate into CT-DNA molecules,thereby inhibiting bacterial proliferation to achieve the antibacterial effects.CCDC:2401116,1;2401117,2.
基金Supported in part by the National Natural Science Foundation of China(62401125)the Natural Science Foundation of Sichuan Province(2023NSFSC1376)the Fundamental Research Funds for the Central Universities(ZYGX2024J008)。
文摘In this paper,a scheme of commonly-resonated extended interaction circuit system based on high order TMn,mode is proposed to lock the phases of two extended interaction oscillators(EIOs)for generating high power at G-band.Two separate EIOs are coupled through a specific single-gap coupling field supported by a designed gap waveguide with length Lg,which form the phase-locked EIOs based on the commonly-resonated system.As a whole system,the system has been focused on with mode analysis based on different single-gap coupling fields,mode hopping,which present the variation of phase difference between the two-beam-wave interactions when changing Lg.To demonstrate the effectiveness of the proposed circuit system in producing the phase locking,we conducted particle-in-cell(PIC)simulations to show that the interesting mode hopping occurs with the phase difference of O and r between the output signals from two output ports,corresponding to the excitation of the TMn mode with different n.Simulation results show that 1)the oscillator can deliver two times of the output power obtained from one single oscillator at 220 GHz,2)the two EIOs can still deliver output signals with phase difference of O and when the currents of the two beams are different or the fabrication errors of the two EIO cavities are taken into account.The proposed scheme is promising in extending to phase locking between multiple EIOs,and generating higher power at millimeter-wave and higher frequencies.
基金supported by the Natural Science Foundation of Shanxi Province(202203021221155)the Foundation of National Key Laboratory of High Efficiency and Low Carbon Utilization of Coal(J23-24-902)。
文摘With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.
文摘Four new coordination polymers,{[Cd(mbtx)(4OHphCOO)]NO_(3)}n(1),{[Zn(mbtx)(1,4-bdc)_(0.5)(H_(2)O)_(2)]·(1,4-bdc)_(0.5)·4H_(2)O}n(2),{[Cd2(mbtx)(5NO_(2)-bdc)_(2)(H_(2)O)_(3)]·4.5H_(2)O}n(3),and{[Zn(H_(2)O)6][Zn_(2)(mbtx)_(2)(btc)_(2)(H_(2)O)_(4)]·2H_(2)O}n(4)(mbtx=1,3-bis(4H-1,2,4-triazole)benzene,4OHphCOO-=p-hydroxybenzoate,1,4-bdc2-=1,4-benzenedicarboxylate,5NO_(2)-bdc2-=5-nitro-isophthalate,btc3-=1,3,5-benzenetricarboxylate),were synthesized under room temperature condition and characterized by single-crystal X-ray diffraction,elemental analyses,and powder X-ray diffraction.Single-crystal X-ray structural analysis shows that complexes 1 and 3 are 2D networks.In 1,the adjacent 2D networks are linked to a 3D network byπ-πstacking interaction.2 and 4 exhibit 1D chains,and the 1D chains are connected into a 3D network byπ-πstacking interaction and intermolecular hydrogen bond.Luminescence and thermogravimetric analysis of the four complexes were discussed.CCDC:2416406,1;2416407,2;2416408,3;2416409,4.
基金CABin grant(F.no.Agril.Edn.4-1/2013-A&P)Indian Council of Agricul-tural Research,Ministry of Agriculture and Farmers’Welfare,Govt.of India and Department of Biotechnology,Govt.of India for BIC project grant(BT/PR40161/BTIS/137/32/2021)。
文摘Background Polygalacturonase inhibiting proteins(PGIPs)play a pivotal role in plant defense against plant patho-gens by inhibiting polygalacturonase(PG),an enzyme produced by pathogens to degrade plant cell wall pectin.PGIPs,also known as leucine-rich repeat pathogenesis-related(PR)proteins,activate the host’s defense response upon interaction with PG,thereby reinforcing the host defense against plant pathogens attacks.In Egyptian or extra-long staple cotton(Gossypium barbadense),the interaction between PGIP and PG is one of the crucial steps in the defense mechanism against major pathogens such as Xanthomonas citri pv.malvacearum and Alternaria mac-rospora,which are responsible for bacterial leaf blight and leaf spot diseases,respectively.Results To unravel the molecular mechanisms underlying these PR proteins,we conducted a comprehensive study involving molecular modeling,protein-protein docking,site-specific double mutation(E169G and F242K),and molec-ular dynamics simulations.Both wild-type and mutated cotton PGIPs were examined in the interaction with the PG enzyme of a bacterial and fungal pathogen.Our findings revealed that changes in conformations of double-mutated residues in the active site of PGIP lead to the inhibition of PG binding.The molecular dynamics simulation studies provide insights into the dynamic behaviour and stability of the PGIP-PG complexes,shedding light on the intricate details of the inhibitory and exhibitory mechanism against the major fungal and bacterial pathogens of G.barbadense,respectively.Conclusions The findings of this study not only enhance our understanding of the molecular interactions between PGs of Xanthomonas citri pv.malvacearum and Alternaria macrospora and PGIP of G.barbadense but also pre-sent a potential strategy for developing the disease-resistant cotton varieties.By variations in the binding affinities of PGs through specific mutations in PGIP,this research offers promising avenues for the development of enhanced resistance to cotton plants against bacterial leaf blight and leaf spot diseases.
基金National Natural Science Foundation of China(31700644)Shandong Province Postdoctoral Innovation Project(SDCX-ZG-202400195)。
文摘The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and centrifugal honey separation,expose beekeepers to potential bee stings and frequently compromise honeycomb integrity.To address these limitations,we designed an automated honey-harvesting robot capable of autonomous frame extraction and beeswax removal.The robot mainly consists of a mobile mechanism equipped with image recognition for beehive localization,a magnetic adsorption-based beehive frame handling device(60.8 N maximum suction)coupled with a cross-slide mechanism for precise frame manipulation,and a thermal beeswax layer-melting apparatus,with optimal melting parameters(15 m/s airflow at 90℃ for 30 seconds)determined through rigorous thermal flow simulations utilizing FLUENT/Mechanical software.Field experiments demonstrated beehive frames handling success rate exceeding 85%,beeswax layer removal efficacy over 80% and damage of honeycombs below 30%.The experiment results validate the robot's operational reliability and its capacity to automate critical harvesting procedures.This study significantly reduces the labor intensity for beekeepers,effectively eliminates the risk of direct human-bee contact and improves the removal of beeswax layer,thereby catalyzing the modernization of the beekeeping industry.
基金supported by the National Natural Science Foundation of China(U20B2042).
文摘The exploration of unmanned aerial vehicle(UAV)swarm systems represents a focal point in the research of multiagent systems,with the investigation of their fission-fusion behavior holding significant theoretical and practical value.This review systematically examines the methods for fission-fusion of UAV swarms from the perspective of multi-agent systems,encompassing the composition of UAV swarm systems and fission-fusion conditions,information interaction mechanisms,and existing fission-fusion approaches.Firstly,considering the constituent units of UAV swarms and the conditions influencing fission-fusion,this paper categorizes and introduces the UAV swarm systems.It further examines the effects and limitations of fission-fusion methods across various categories and conditions.Secondly,a comprehensive analysis of the prevalent information interaction mechanisms within UAV swarms is conducted from the perspective of information interaction structures.The advantages and limitations of various mechanisms in the context of fission-fusion behaviors are summarized and synthesized.Thirdly,this paper consolidates the existing implementation research findings related to the fission-fusion behavior of UAV swarms,identifies unresolved issues in fission-fusion research,and discusses potential solutions.Finally,the paper concludes with a comprehensive summary and systematically outlines future research opportunities.
基金supported by National Natural Science Foundation of China(32201752)Xinjiang Tianchi Talents Program (TCYC2023TP02)Key Project of the Natural Science Foundation of Xinjiang Production and Construction Corps (2024DA001)
文摘Verticillium wilt,caused by the infamous pathogen Verticillium dahliae,presents a primary constraint on cotton cul-tivation worldwide.The complexity of disease resistance in cotton and the largely unexplored interaction dynamics between the cotton plant host and V.dahliae pathogen pose a crucial predicament for effectively managing cotton Verticillium wilt.Nevertheless,the most cost-effective approach to controlling this disease involves breeding and cul-tivating resistant cotton varieties,demanding a meticulous analysis of the mechanisms underlying cotton’s resistance to Verticillium wilt and the identification of pivotal genes.These aspects constitute focal points in disease-resistance breeding programs.In this review,we comprehensively discuss genetic inheritance associated with Verticillium wilt resistance in cotton,the advancements in molecular markers for disease resistance,the functional investiga-tion of resistance genes in cotton,the analysis of pathogenicity genes in V.dahliae,as well as the intricate interplay between cotton and this fungus.Moreover,we delve into the future prospects of cutting-edge research on cotton Verticillium wilt,aiming to proffer valuable insights for the effective management of this devastating fungus.
基金Project(52325905) supported by the National Natural Science Foundation of ChinaProjects(DJ-HXGG-2023-04, DJHXGG-2023-16) supported by the Key Technology Research Projects of Power China。
文摘Plum blossom pile is a new type of special-shaped pile, which is proposed based on the principle of maximum perimeter with the same cross-sectional area. To advance this technique, primarily for the design of plum blossom piles, it is important to investigate the skin friction behavior of plum blossom pile foundations precluding any straightforward constitutive model. In this work, an analytic method dependent on the cross-sectional geometry and the vertical shearing effects is proposed by means of equilibrium analysis to calculate the effective vertical stress in the surrounding soil, the skin friction/negative skin friction, and the axial force/dragload of a plum blossom pile. Additionally, the curves of skin friction of piles are investigated with the same conditions. The results show that the curves of skin friction of piles deduced according to the developed analytic method agree well with the FEM results and related literature solution, which validates the solution. The axial force of the pile decreases with the increase of the shear action coefficient in the buried depth direction under the vertical concentrated load when considering the vertical shearing effects on the pile-soil interfaces.
基金supported by the Aeronautical Science Foundation of China(2020Z023053002).
文摘High complexity and uncertainty of air combat pose significant challenges to target intention prediction.Current interpolation methods for data pre-processing and wrangling have limitations in capturing interrelationships among intricate variable patterns.Accordingly,this study proposes a Mogrifier gate recurrent unit-D(Mog-GRU-D)model to address the com-bat target intention prediction issue under the incomplete infor-mation condition.The proposed model directly processes miss-ing data while reducing the independence between inputs and output states.A total of 1200 samples from twelve continuous moments are captured through the combat simulation system,each of which consists of seven dimensional features.To bench-mark the experiment,a missing valued dataset has been gener-ated by randomly removing 20%of the original data.Extensive experiments demonstrate that the proposed model obtains the state-of-the-art performance with an accuracy of 73.25%when dealing with incomplete information.This study provides possi-ble interpretations for the principle of target interactive mecha-nism,highlighting the model’s effectiveness in potential air war-fare implementation.
基金Projects(52208369,52309138,52108320)supported by the National Natural Science Foundation of ChinaProjects(2023NSFSC0284,2025ZNSFSC0409)supported by the Sichuan Science and Technology Program,ChinaProject(U22468214)supported by the Joint Fund Project for Railway Basic Research by the National Natural Science Foundation of China and China State Railway Group Co.,Ltd.
文摘In the practical slope engineering,the stability of lower sliding mass(region A)with back tensile cracks of the jointed rock slope attracts more attentions,but the upper rock mass(region B)may also be unstable.Therefore,in this study,based on the stepped failure mode of bedding jointed rock slopes,considering the influence of the upper rock mass on the lower stepped sliding mass,the improved failure model for analyzing the interaction force(F_(AB))between two regions is constructed,and the safety factors(F_(S))of two regions and whole region are derived.In addition,this paper proposes a method to determine the existence of F_(AB) using their respective acceleration values(a_(A) and a_(B))when regions A and B are unstable.The influences of key parameters on two regions and the whole region are analyzed.The results show that the variation of the F_(AB) and F_(S) of two regions can be obtained accurately based on the improved failure model.The accuracy of the improved failure model is verified by comparative analysis.The research results can explain the interaction mechanism of two regions and the natural phenomenon of slope failure caused by the development of cracks.
