期刊文献+
共找到5,162篇文章
< 1 2 250 >
每页显示 20 50 100
Output regulation of singular linear systems with input saturation by composite nonlinear feedback control
1
作者 LIN Xiaoyan CHEN Lingmei +1 位作者 LIN Dongyun LAN Weiyao 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2018年第4期834-843,共10页
Composite nonlinear feedback (CNF) control techniquefor tracking control problems is extended to the output regulationproblem of singular linear systems with input saturation. A statefeedback CNF control law and an ... Composite nonlinear feedback (CNF) control techniquefor tracking control problems is extended to the output regulationproblem of singular linear systems with input saturation. A statefeedback CNF control law and an output feedback CNF controllaw are constructed respectively for the output regulation problemof singular linear systems with input saturation. It is shown thatthe output regulation problem by CNF control is solvable underthe same solvability conditions of the output regulation problemby linear control. However, with the virtue of the CNF control, thetransient performance of the closed-loop system can be improvedby carefully designing the linear part and the nonlinear part of theCNF control law. The design procedure and the improvement ofthe transient performance of the closed-loop system are illustratedwith a numerical simulation. 展开更多
关键词 singular linear system input saturation output regula-tion composite nonlinear feedback
在线阅读 下载PDF
基于Input-Output模型的新疆水资源合理配置研究 被引量:2
2
作者 刘爽 李莉 荣伟 《江西农业学报》 CAS 2018年第5期101-105,109,共6页
根据2007和2012年新疆统计年鉴和投入产出表等相关资料,利用Input-output模型和水资源结构偏差系数对国民经济各产业的用水效率、用水效益指数等进行了分析。研究表明:2012年新疆各产业水资源利用效率和效益显著提高,但农业用水消耗量... 根据2007和2012年新疆统计年鉴和投入产出表等相关资料,利用Input-output模型和水资源结构偏差系数对国民经济各产业的用水效率、用水效益指数等进行了分析。研究表明:2012年新疆各产业水资源利用效率和效益显著提高,但农业用水消耗量远高于其产出效益,第三产业和生态环境产业的水资源消耗呈现递减趋势。此外,工业和建筑业的水资源配置较为合理。最后,为促进新疆水资源优化配置提出了相应的对策建议。 展开更多
关键词 水资源 合理配置 input-output模型 新疆
在线阅读 下载PDF
Output-feedback Stabilization for Stochastic High-order Nonlinear Systems with a Ratio of Odd Integers Power 被引量:4
3
作者 LIU Liang DUAN Na XIE Xue-Jun 《自动化学报》 EI CSCD 北大核心 2010年第6期858-864,共7页
关键词 反馈系统 稳定性 自动化 研究
在线阅读 下载PDF
Channel capacity of multiple-input multiple-output systems with transmit and receive correlation
4
作者 Wang Jun Zhu Shihua +1 位作者 Wang Lei Liu Fang 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2008年第1期21-26,共6页
In order to investigate the impact of channel model parameters on the channel capacity of a multipleinput multiple-output (MIMO) system, a novel method is proposed to explore the channel capacity under Rayleigh fiat... In order to investigate the impact of channel model parameters on the channel capacity of a multipleinput multiple-output (MIMO) system, a novel method is proposed to explore the channel capacity under Rayleigh fiat fading with correlated transmit and receive antennas. The optimal transmitting direction which can achieve maximum channel capacity is derived using random matrices theory. In addition, the closed-form expression for the channel capacity of MIMO systems is given by utilizing the properties of Wishart distribution when SNR is high. Computer simulation results show that the channel capacity is maximized when the antenna spacing increases to a certain point, and furthermore, the larger the scattering angle is, the more quickly the channel capacity converges to its maximum. At high SNR (〉12 dB), the estimation of capacity is close to its true wlue. And, when the same array configuration is adopted both at the transmitter and the receiver, the UCA yields higher channel capacity than ULA. 展开更多
关键词 multiple input multiple output channel capacity spatial correlation channel state information
在线阅读 下载PDF
Performance of terahertz channel with multiple input multiple output techniques 被引量:1
5
作者 M.Bharathi S.Sasikala J.Vanmathi 《红外与毫米波学报》 SCIE EI CAS CSCD 北大核心 2017年第6期641-645,共5页
Terahertz(THz) communication is being considered as a potential solution to mitigate the demand for high bandwidth. The characteristic of THz band is relatively different from present wireless channel and imposes tech... Terahertz(THz) communication is being considered as a potential solution to mitigate the demand for high bandwidth. The characteristic of THz band is relatively different from present wireless channel and imposes technical challenges in the design and development of communication systems. Due to the high path loss in THz band,wireless THz communication can be used for relatively short distances. Even,for a distance of few meters( > 5 m),the absorption coefficient is very high and hence the performance of the system is poor. The use of multiple antennas for wireless communication systems has gained overwhelming interest during the last two decades.Multiple Input Multiple Output( MIMO) Spatial diversity technique has been exploited in this paper to improve the performance in terahertz band. The results show that the Bit Error Rate( BER) is considerably improved for short distance( < 5 m) with MIMO. However,as the distance increases,the improvement in the error performance is not significant even with increase in the order of diversity. This is because,as distance increases,in some frequency bands the signal gets absorbed by water vapor and results in poor transmission. Adaptive modulation scheme is implemented to avoid these error prone frequencies. Adaptive modulation with receiver diversity is proposed in this work and has improved the BER performance of the channel for distance greater than 5 m. 展开更多
关键词 《红外与毫米波学报》 期刊 编辑工作 发行工作
在线阅读 下载PDF
Instance reduction for supervised learning using input-output clustering method
6
作者 YODJAIPHET Anusorn THEERA-UMPON Nipon AUEPHANWIRIYAKUL Sansanee 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第12期4740-4748,共9页
A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input d... A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input data in accordance with the groups of output data.Then,a set of prototypes are selected from the clustered input data.The inessential data can be ultimately discarded from the data set.The proposed method can reduce the effect from outliers because only the prototypes are used.This method is applied to reduce the data set in regression problems.Two standard synthetic data sets and three standard real-world data sets are used for evaluation.The root-mean-square errors are compared from support vector regression models trained with the original data sets and the corresponding instance-reduced data sets.From the experiments,the proposed method provides good results on the reduction and the reconstruction of the standard synthetic and real-world data sets.The numbers of instances of the synthetic data sets are decreased by 25%-69%.The reduction rates for the real-world data sets of the automobile miles per gallon and the 1990 census in CA are 46% and 57%,respectively.The reduction rate of 96% is very good for the electrocardiogram(ECG) data set because of the redundant and periodic nature of ECG signals.For all of the data sets,the regression results are similar to those from the corresponding original data sets.Therefore,the regression performance of the proposed method is good while only a fraction of the data is needed in the training process. 展开更多
关键词 instance reduction input-output clustering fuzzy c-means clustering support vector regression supervised learning
在线阅读 下载PDF
A multi-input and multi-output design on automotive engine management system
7
作者 翟禹嘉 孙研 +1 位作者 钱科军 LEE Sang-hyuk 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第12期4687-4692,共6页
Lookup table is widely used in automotive industry for the design of engine control units(ECU).Together with a proportional-integral controller,a feed-forward and feedback control scheme is often adopted for automotiv... Lookup table is widely used in automotive industry for the design of engine control units(ECU).Together with a proportional-integral controller,a feed-forward and feedback control scheme is often adopted for automotive engine management system(EMS).Usually,an ECU has a structure of multi-input and single-output(MISO).Therefore,if there are multiple objectives proposed in EMS,there would be corresponding numbers of ECUs that need to be designed.In this situation,huge efforts and time were spent on calibration.In this work,a multi-input and multi-out(MIMO) approach based on model predictive control(MPC) was presented for the automatic cruise system of automotive engine.The results show that the tracking of engine speed command and the regulation of air/fuel ratio(AFR) can be achieved simultaneously under the new scheme.The mean absolute error(MAE) for engine speed control is 0.037,and the MAE for air fuel ratio is 0.069. 展开更多
关键词 neural network spark-ignition engine dynamical system modeling system identification multi-input and mult-output(MIMO) control system
在线阅读 下载PDF
Multi-dimensional blind separation method for STBC systems 被引量:3
8
作者 Minggang Luo Liping Li +1 位作者 Guobing Qian Huaguo Zhang 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2013年第6期912-918,共7页
Intercepted signal blind separation is a research topic with high importance for both military and civilian communication systems. A blind separation method for space-time block code (STBC) systems is proposed by us... Intercepted signal blind separation is a research topic with high importance for both military and civilian communication systems. A blind separation method for space-time block code (STBC) systems is proposed by using the ordinary independent component analysis (ICA). This method cannot work when specific complex modulations are employed since the assumption of mutual independence cannot be satisfied. The analysis shows that source signals, which are group-wise independent and use multi-dimensional ICA (MICA) instead of ordinary ICA, can be applied in this case. Utilizing the block-diagonal structure of the cumulant matrices, the JADE algorithm is generalized to the multidimensional case to separate the received data into mutually independent groups. Compared with ordinary ICA algorithms, the proposed method does not introduce additional ambiguities. Simulations show that the proposed method overcomes the drawback and achieves a better performance without utilizing coding information than channel estimation based algorithms. 展开更多
关键词 multiple input multiple output (MIMO) space-time block code (STBC) multi-dimensional independent component analysis (MICA) blind separation
在线阅读 下载PDF
ADRC based control for a class of input time delay systems 被引量:6
9
作者 Dongyang Zhang Xiaolan Yao +1 位作者 Qinghe Wu Zhuoyue Song 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2017年第6期1210-1220,共11页
This paper is concerned with the control design and the theoretical analysis for a class of input time-delay systems with stable, critical stable or unstable poles. In order to overcome the time delay, a novel feed-fo... This paper is concerned with the control design and the theoretical analysis for a class of input time-delay systems with stable, critical stable or unstable poles. In order to overcome the time delay, a novel feed-forward compensation active disturbance rejection control(FFC-ADRC) approach is proposed. It combines advantages of the Smith predictor and the traditional active disturbance rejection control(ADRC). The tracking differentiator(TD) is designed to predict the control signal, which adds an anticipatory control to the control signal and allows a higher observer bandwidth to obtain better disturbance rejection. The modified extended state observer(ESO) is designed to estimate both system states and the total disturbances(internal disturbance, uncertainties and delayed disturbance). Then the Lyapunov theory and the theory of the input-output stability are applied to prove the asymptotic stability of the closed-loop control system. Finally, numerical simulations show the effectiveness and practicality of the proposed design. 展开更多
关键词 time-delay system feed-forward compensation active disturbance rejection control(FFC-ADRC) tracking differentiator(TD) Lyapunov theory bound-input-bound-output(BIBO) stability
在线阅读 下载PDF
Improved MIMO-OFDM scheme for the next generation WLAN
10
作者 Zhanji Wu Xiang Gao 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2013年第1期52-59,共8页
The research and application of wireless local area networks (WLAN) technology are in a stage of rapid development. It has been one of research focuses of the wireless communications field. Through the use of enhanc... The research and application of wireless local area networks (WLAN) technology are in a stage of rapid development. It has been one of research focuses of the wireless communications field. Through the use of enhanced single-user (SU)/multi-user (MU) multiple input multiple output (MIMO)-orthogonal frequency division multiplexing (OFDM) technology, the next generation WLAN IEEE 802.1 lac dramatically increases the throughput. An improved MIMO-OFDM scheme based on modulation diversity is proposed for the next generation WLAN. It uses two-dimensional modulation diversity to the current IEEE 802.11ac transmission scheme. Through the space-time-frequency component inter- leaver and the rotational modulation, the proposed scheme ex- hibits high spectral efficiency and low error rate in fading channels. The simulation results show that the proposed scheme significantly outperforms the SU/MU MIMO-OFDM scheme in the current IEEE 802.11 ac standard, which is up to 5 dB. 展开更多
关键词 wireless local area networks (WLAN) I EEE 802.1 lac modulation diversity multiple input multiple output (MIMO) orthog- onal frequency division multiplexing (OFDM).
在线阅读 下载PDF
茶树修剪物替代木屑栽培香菇的效果研究
11
作者 朱留刚 孙君 +3 位作者 林清霞 余海燕 余长城 张文锦 《茶叶学报》 2025年第2期28-35,共8页
【目的】探索茶树修剪枝叶替代木屑栽培香菇的可行性,获得适宜的茶树修剪枝叶添加比例,为开辟茶有机副产物资源化利用提供新途径。【方法】以茶树修剪枝叶为替代基质原料,以0%(CK)、20%(PF-5)、40%(PF-4)、60%(PF-3)、80%(PF-2)和100%(P... 【目的】探索茶树修剪枝叶替代木屑栽培香菇的可行性,获得适宜的茶树修剪枝叶添加比例,为开辟茶有机副产物资源化利用提供新途径。【方法】以茶树修剪枝叶为替代基质原料,以0%(CK)、20%(PF-5)、40%(PF-4)、60%(PF-3)、80%(PF-2)和100%(PF-1)等质量比例替代木屑为处理,比较其对香菇菌丝体的生长速度、子实体产量和品质营养成分等的影响。【结果】(1)杂菌感染率,添加有茶修剪枝叶的处理均低于CK,且随着替代比例的增加而下降,当替代比例≥60%时表现出与CK的显著差异。其中PF-4的菌丝体生长速度最快达1.36 mm·d^(-1),显著高于CK(P<0.05),其次为PF-5(P>0.05);(2)单筒鲜菇产量,各替代处理的第一、二、三潮和总量均以PF-4为高(总量718.83 g·袋^(-1)),较CK分别提高了16.20%(P<0.05)、 9.70%、8.45%、11.78%(P<0.05)。添加茶修剪枝叶处理的平均生物学效率,均高于CK,增幅达8.45%~33.90%,且差异均达显著水平(P<0.05),其中又以PF-4最高为60.45%。(3)菇盖内含品质营养成分,粗蛋白含量随着收获潮次的增加而递减,其中第一潮所有茶修剪枝叶替代处理均高于CK,增幅为4.75%~9.69%;氨基酸总量也以第一潮为高且与粗蛋白含量的变化一致,其中以PF-4含量最大较CK增幅为9.96%;粗纤维含量表现为同潮次均随茶修剪枝叶替代比例的增加而递减,与CK同比其第一、二、三潮次分别下降了1.76%~37.32%、5.39%~17.12%和14.53%~49.86%。(4)茶修剪枝叶添加处理的产投比均显著高于CK(P<0.05),增幅高达78.69%~122.95%。【结论】利用茶修剪枝叶替代传统木屑栽培香菇不仅技术上可行,且适当的替代比例(≤40%)可起到增产提质作用。 展开更多
关键词 茶树 修剪枝叶 替代率 香菇 产量 营养成分 投入产出比
在线阅读 下载PDF
Soft-output stack algorithm with lattice-reduction for MIMO detection
12
作者 Yuan Yang Hailin Zhang Junfeng Hue 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2010年第2期197-203,共7页
A computationally efficient soft-output detector with lattice-reduction (LR) for the multiple-input multiple-output (MIMO) systems is proposed. In the proposed scheme, the sorted QR de- composition is applied on t... A computationally efficient soft-output detector with lattice-reduction (LR) for the multiple-input multiple-output (MIMO) systems is proposed. In the proposed scheme, the sorted QR de- composition is applied on the lattice-reduced equivalent channel to obtain the tree structure. With the aid of the boundary control, the stack algorithm searches a small part of the whole search tree to generate a handful of candidate lists in the reduced lattice. The proposed soft-output algorithm achieves near-optimal perfor- mance in a coded MIMO system and the associated computational complexity is substantially lower than that of previously proposed methods. 展开更多
关键词 multiple-input multiple-output (MIMO) soft-output de- tection lattice-reduction stack algorithm.
在线阅读 下载PDF
投入产出框架下数字经济核心产业赋能我国经济和就业增长的测算研究 被引量:5
13
作者 张瑜 田开兰 +1 位作者 高翔 杨翠红 《统计研究》 北大核心 2025年第1期45-60,共16页
本文依据国家统计局公布的数字经济核心产业分类标准,构建了反映数字经济核心产业的非竞争型投入产出(DIOT)模型,并编制了2007年、2012年、2017年和2020年我国139部门的DIOT表,进而测算了数字经济核心产业通过产业关联对我国经济和就业... 本文依据国家统计局公布的数字经济核心产业分类标准,构建了反映数字经济核心产业的非竞争型投入产出(DIOT)模型,并编制了2007年、2012年、2017年和2020年我国139部门的DIOT表,进而测算了数字经济核心产业通过产业关联对我国经济和就业增长的贡献。研究结果表明,第一,2007—2020年数字经济核心产业对我国国内生产总值(GDP)和就业的贡献稳步提升,2020年分别达到24.51%和19.31%。第二,数字经济核心产业的发展正在成为经济和就业增长的重要动能。2007—2012年,数字经济核心产业促进经济和就业增长主要源于数字经济核心产业对传统产业的拉动,到2012—2020年则转变为数字经济核心产业的发展和传统产业对数字经济核心产业的拉动。第三,分行业看,数字经济核心产业自身创造的增加值和就业大于其对传统产业增加值和就业的拉动作用,且近年来这一特征表现得更加明显。其中,数字经济核心产业对服务业贡献相对较大,且贡献保持高速增长态势,而对制造业贡献相对较小。第四,数字经济核心产业与传统产业具有紧密的生产关联,传统产业对数字经济核心产业的依赖度不断提升,数字赋能经济发展的作用逐渐增强,在分析数字经济核心产业对经济和就业的贡献时需要考虑其通过产业关联发挥的赋能作用。本文的研究为更加科学准确量化数字经济核心产业对我国经济和就业增长的贡献提供了重要的方法和实证参考。 展开更多
关键词 数字经济核心产业 投入产出模型 增加值 就业 产业关联
在线阅读 下载PDF
我国数字经济融合特征及其变化趋势分析 被引量:15
14
作者 徐映梅 李坤 《统计研究》 北大核心 2025年第1期61-74,共14页
本文从价值链投入产出视角界定了数字经济融合的概念和范围,划分数字经济融合类型,构建了一组数字经济融合测度指标体系。基于RAS的拓展方法(IGRAS)创建了2001—2020年数字经济序列投入产出表新数据集,测度了数字经济核心部门内部以及... 本文从价值链投入产出视角界定了数字经济融合的概念和范围,划分数字经济融合类型,构建了一组数字经济融合测度指标体系。基于RAS的拓展方法(IGRAS)创建了2001—2020年数字经济序列投入产出表新数据集,测度了数字经济核心部门内部以及数字经济核心部门与数字化效率提升部门之间来自供给与需求两个方向的融合程度,总结了数字经济融合的主要特征。研究表明,数字经济核心部门与供给侧和需求侧部门的平均融合度均超过国民经济各部门的平均融合程度,呈现出较强的拉动与推动力量;数字经济核心部门与原材料、能源和机械制造部门的供给侧融合度较高,与生产性服务业部门的供给侧融合逐渐加深,反映出数字经济核心部门发展对上游关联部门的依赖性增强;数字经济核心部门与部分制造业部门和研发部门的需求侧融合度较高,表明数字经济核心部门为发展高端制造业和开展研发活动提供了数字化和智能化支持,不同部门的数字化进程存在明显差异;不同类型的数字经济核心部门与国民经济各部门之间的融合方式呈现多样性,体现了基于数字经济产业关联的紧密性与渗透性差异。本研究对于把握现阶段数字经济融合发展特征和趋势,深刻认识数字经济融合的多样化模式,对激励产业数字化和数字产业化具有重要意义。 展开更多
关键词 数字经济 产业融合 数字经济融合 投入产出表
在线阅读 下载PDF
考虑模块输入阻抗影响的ISOP-DAB变换器系统输入均压控制策略 被引量:1
15
作者 李善寿 夏虎 +2 位作者 方潜生 叶伟 王浩 《电力自动化设备》 北大核心 2025年第3期124-130,154,共8页
针对输入串联输出并联双有源全桥(ISOP-DAB)直流变换器系统的子模块元器件参数不一致所导致的输出功率不均分问题,提出一种基于输入阻抗的ISOP-DAB直流变换器系统输入均压控制策略。通过改进传统单移相控制方法,得到一种能够减小回流功... 针对输入串联输出并联双有源全桥(ISOP-DAB)直流变换器系统的子模块元器件参数不一致所导致的输出功率不均分问题,提出一种基于输入阻抗的ISOP-DAB直流变换器系统输入均压控制策略。通过改进传统单移相控制方法,得到一种能够减小回流功率的新型单移相(NSPS)控制方法;进一步,基于NSPS分析ISOP-DAB直流变换器系统的输入电压均分、输出功率均分与各模块输入阻抗之间的关系,通过调节NSPS的内移相比,使各模块输入阻抗幅值相等,实现系统输入电压均分以及模块输出功率相等,同时减小双有源全桥变换器的回流功率,提高系统工作功率。通过仿真和实验验证了所提控制策略的正确性和有效性。 展开更多
关键词 双有源全桥变换器 单移相控制 输入串联输出并联 输入电压均分 输出功率均分
在线阅读 下载PDF
企业数智化度量:综合数智化投入和赋能视角 被引量:7
16
作者 刘峰 刘充 翟伟欢 《厦门大学学报(哲学社会科学版)》 北大核心 2025年第2期56-69,共14页
度量企业数智化程度对评估企业数智化转型和实证研究具有重要意义。然而,现有度量方式存在“言行不一”、未考虑赋能过程和主观性偏强等问题。基于粗糙集方法、DEA-Malmquist方法和熵权法,沿袭“数智化文献收集和回顾-概念梳理和界定-... 度量企业数智化程度对评估企业数智化转型和实证研究具有重要意义。然而,现有度量方式存在“言行不一”、未考虑赋能过程和主观性偏强等问题。基于粗糙集方法、DEA-Malmquist方法和熵权法,沿袭“数智化文献收集和回顾-概念梳理和界定-已有度量方式评述-构建数智化指标-指标分析和验证”这一思路,综合企业数智化投入结果和赋能产出视角,对2012-2023年中国上市公司数智化程度进行测度。研究发现,已有度量可大致分为数智技术应用、资产投入、人力资本需求和文本词频四种方式。时间差异上,企业数智化水平呈现逐年上升趋势;行业和地域差异上,软件和信息技术服务等信息服务业和第三产业,以及东部地区企业数智化水平相对较高,石油加工等采矿业和第一产业,以及西部地区企业数智化水平相对较低。 展开更多
关键词 企业数智化 指标测度 数智化投入 数智化赋能产出
在线阅读 下载PDF
我国南方紫云英还田的水稻产量和效益的量化研究
17
作者 王建红 冯含笑 +6 位作者 曹凯 张贤 徐静 斯林林 徐昌旭 王佳宇 曹卫东 《植物营养与肥料学报》 北大核心 2025年第4期819-828,共10页
【目的】通过对我国南方稻区7省(自治区)典型稻田定位试验结果进行大数据分析,量化紫云英还田及配施化肥对水稻产量和经济效益的影响,为明确紫云英在水稻生产上的增产增效作用以及化肥替代能力提供科学依据。【方法】以“紫云英(milk ve... 【目的】通过对我国南方稻区7省(自治区)典型稻田定位试验结果进行大数据分析,量化紫云英还田及配施化肥对水稻产量和经济效益的影响,为明确紫云英在水稻生产上的增产增效作用以及化肥替代能力提供科学依据。【方法】以“紫云英(milk vetch)”、“紫云英与化肥配施(milk vetch combined with chemical fertilizer application)”和“水稻产量(rice yield)”为关键词,在Web of Science、中国知网(CNKI)和百度学术数据库检索2024年4月30日之前的文献。然后基于以下标准对文献进行筛选:1)试验地点在中国南方稻区;2)数据限于大田定位试验;3)试验限于紫云英−水稻轮作系统,并包含不种紫云英休闲对照、紫云英与化肥配施、单施化肥和单施紫云英处理;4)观测结果包含样本量、均值和标准误差。最终获得39篇文献,4850个水稻产量数据。运用数据正态区间估值方法,计算紫云英和化肥的水稻增产率、紫云英的化肥替代率、紫云英及化肥的肥料产投比等特征值。【结果】我国南方稻区紫云英的水稻增产率平均为48.3 kg/t,单季稻低于双季稻但高于早稻系统。化肥的水稻增产率平均为6.18 kg/kg,紫云英的化肥替代率平均为8.52 kg/t。紫云英鲜草产量在22.5 t/hm^(2)时,紫云英产投比平均为2.23,化肥产投比平均为2.66,这些指标在早稻、单季稻、双季稻系统间均无显著差异,紫云英作为肥用的经济价值平均为187.7元/t;当紫云英的鲜草产量低于9.92 t/hm^(2)时,紫云英在紫云英-水稻系统中的经济效益表现为负效益。紫云英-水稻轮作系统的水稻增产潜力比冬闲-水稻轮作系统增加729 kg/hm^(2)。【结论】在我国南方稻区长期紫云英−水稻轮作制度下,紫云英作为肥用的经济价值平均为187.7元/t,对水稻的增产率平均为48.3 kg/t,化肥替代率8.52 kg/t。综合紫云英提升水稻增产潜力等结果,南方稻区应充分重视利用冬闲田种植紫云英,并采用可提升紫云英鲜草产量的生产技术措施。 展开更多
关键词 大数据分析 紫云英 水稻增产量 紫云英的化肥替代率 紫云英产投比 经济效益
在线阅读 下载PDF
中国采矿业隐含碳流动时空演变格局及减排路径 被引量:1
18
作者 杨玮 郭嫚雨 +2 位作者 龙涛 邓莎 王茜茜 《金属矿山》 北大核心 2025年第6期284-292,共9页
追踪贸易隐含碳排放对于实现国家“双碳”目标至关重要。然而,跨区域与部门间隐含碳流动特征及路径的识别面临诸多挑战,阻碍了减排进程。采矿业作为高碳排放密集型行业,其在跨省贸易中的隐含碳流动趋势及关键减排路径仍待进一步研究。... 追踪贸易隐含碳排放对于实现国家“双碳”目标至关重要。然而,跨区域与部门间隐含碳流动特征及路径的识别面临诸多挑战,阻碍了减排进程。采矿业作为高碳排放密集型行业,其在跨省贸易中的隐含碳流动趋势及关键减排路径仍待进一步研究。为了解决上述问题,研究基于时空视角,利用中国2012、2015及2017年的多区域投入产出表(MRIO),构建了中国采矿业隐含碳转移网络分析框架,系统考察了采矿业隐含碳流动的演变趋势、空间分布特征及其减排路径。结果表明:(1)中国采矿业因能源消费产生的二氧化碳排放量总体呈下降趋势,其中原煤燃烧贡献的排放量最高;(2)采矿业的直接与隐含碳排放虽呈现收敛态势,但行业整体处于隐含碳净流出状态,其主要上游部门依次为S8(石油、炼焦产品和核燃料加工品)、S11(金属冶炼和压延加工品)、S20(电力、热力的生产和供应)及S24(交通运输、仓储和邮政业);(3)江苏、广东、河南、陕西、山东、河北、山西等省份具有较高的网络中心性,是采矿业减排的关键区域。隐含碳流动量最大的路径为陕西至浙江,达357.06万t;本研究旨在为采矿业乃至整个经济体系的绿色低碳转型提供科学依据与实践参考,助力构建人与自然和谐共生的现代化矿业发展模式。 展开更多
关键词 采矿业 多区域投入产出模型(MRIO) 复杂网络 隐含碳流动
在线阅读 下载PDF
基于亚模函数的可见光通信MIMO-OFDM系统天线选择算法 被引量:1
19
作者 贾科军 贺耀民 +3 位作者 张芳芳 蔺莹 薛建彬 郝莉 《电讯技术》 北大核心 2025年第3期445-453,共9页
在可见光通信多输入多输出系统中,针对天线选择理论建模不足和穷举算法复杂度过高的问题,提出了基于亚模函数的天线选择方案。首先,以下行链路的信道容量最大化为目标,建立了基于亚模函数的天线选择理论优化模型,并证明了目标函数满足... 在可见光通信多输入多输出系统中,针对天线选择理论建模不足和穷举算法复杂度过高的问题,提出了基于亚模函数的天线选择方案。首先,以下行链路的信道容量最大化为目标,建立了基于亚模函数的天线选择理论优化模型,并证明了目标函数满足的单调亚模性。其次,根据亚模函数的收益递减效应,设计了基于容量最大化的天线选择算法。最后,仿真分析了非对称限幅光正交频分复用(Asymmetrically Clipped Optical Orthogonal Frequency Division Multiplexing,ACO-OFDM)和直流偏置光OFDM(DC-biased Optical OFDM,DCO-OFDM)系统的信道容量和误码率性能。在6选4的情况下,当信噪比为30 dB时,所提算法与穷举最优算法的信道容量差异仅为0.51 b/s/Hz和1.2 b/s/Hz,复杂度则降低了约46.3%。另外,随着选择天线数的增多和调制阶数的增大,系统的误码率性能逐渐变差。 展开更多
关键词 可见光通信(VLC) 多输入多输出(MIMO) 天线选择 亚模函数 收益递减效应
在线阅读 下载PDF
中国智慧农业的规模测度与效应评估 被引量:4
20
作者 张少华 陈壬涛 黎美玲 《贵州财经大学学报》 北大核心 2025年第2期22-31,共10页
文章旨在对接国民经济核算体系,首次测度中国智慧农业的增加值规模并评估其产业关联效应和最终需求效应。为此,根据国家统计局《数字经济及其核心产业统计分类(2021)》,借助100多部门的投入产出表,将农业部门的产业数字化部门分解出来,... 文章旨在对接国民经济核算体系,首次测度中国智慧农业的增加值规模并评估其产业关联效应和最终需求效应。为此,根据国家统计局《数字经济及其核心产业统计分类(2021)》,借助100多部门的投入产出表,将农业部门的产业数字化部门分解出来,以测度中国智慧农业的规模并评估其效应。研究发现:(1)我国智慧农业的平均规模为3713.88亿元,在农业大类中占比为5.58%,占GDP比重仅为0.47%,说明我国智慧农业发展空间巨大。同时,无论是智慧农业还是传统农业,其年均增长速度均低于同期GDP增长速度,说明在产业结构调整的大趋势下依然要加大农业发展力度。(2)从产业关联角度看,我国智慧农业与数字经济核心产业尤其是数字产品制造业的后向联系较大,智慧农业发展从初期的基础建设转移到提高生产服务效率与数字技术创新领域;与此同时,智慧农业和传统农业对国民经济其他产业的需求拉动和供给推动作用几乎相等,且相比于传统农业,智慧农业对国民经济其他产业的供需变动不敏感。(3)从最终需求的敏感度分析看,智慧农业是消费依赖性产业,但各项最终需求对智慧农业的推动较小,且有效需求的扩张大部分作用于传统农业。 展开更多
关键词 智慧农业 投入产出分析 产业关联效应 最终需求效应
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部