Stability assessment of slopes has historically been performed assuming soils to be homogeneous in two-dimensional(2D) cases. In real cases, soils are usually inhomogeneous, and each slope collapse indicates a three-d...Stability assessment of slopes has historically been performed assuming soils to be homogeneous in two-dimensional(2D) cases. In real cases, soils are usually inhomogeneous, and each slope collapse indicates a three-dimensional(3D) nature. Based on a 3D rotational failure mechanism, this work develops an approach to account for the impact of the vertical strength inhomogeneity on the 3D stability of stepped slopes. Seismic actions are taken into account by introducing the concept of a horizontal seismic coefficient. An upper-bound expression for stability factors is derived in the light of the kinematic approach, and the most critical solution is obtained from an optimization programming. In comparison with the previously published solutions, the validity of the proposed method is shown. A sensitivity analysis is carried out to discuss parametric effects on the stability of 3D stepped inhomogeneous slopes.展开更多
Most of studies on network capacity are based on the assumption that all the nodes are uniformly distributed, which means that the networks are characterized by homogeneity. However, many realistic networks exhibit in...Most of studies on network capacity are based on the assumption that all the nodes are uniformly distributed, which means that the networks are characterized by homogeneity. However, many realistic networks exhibit inhomogeneity due to natural and man-made reasons. In this work, the capacity of inhomogeneous hybrid networks with directional antennas for the first time is studied. By setting different node distribution probabilities, the whole network can be devided into dense cells and sparse cells. On this basis, an inhomogeneous hybrid network model is proposed. The network can exhibit significant inhomogeneity due to the coexistence of two types of cells. Then, we derive the network capacity and maximize the capacity under different channel allocation schemes. Finally, how the network parameters influence the network capacity is analyzed. It is found that if there are plenty of base stations, the per-node throughput can achieve constant order, and if the beamwidth of directional antenna is small enough, the network capacity can scale.展开更多
The gas explosion in residential building has always been a highly concerned problem.Explosions in homogeneous mixtures have been extensively studied.However,mixtures are often inhomogeneous in the practical scenarios...The gas explosion in residential building has always been a highly concerned problem.Explosions in homogeneous mixtures have been extensively studied.However,mixtures are often inhomogeneous in the practical scenarios due to the differences in the densities of methane and air.In order to investigate the effects of gas explosions in inhomogeneous mixtures,experimental studies involving gas leakage and explosion are conducted in a full-scale residential building to reproduce the process of gas explosion.By fitting the dimensionless buoyancy as a function of dimensionless height and dimensionless time,a distribution model of gas in large-scale spaces is established,and the mechanism of inhomogeneous distribution of methane is also be revealed.Furthermore,the stratified reconstruction method(SRM)is introduced for efficiently setting up inhomogeneous concentration fields in FLACS.The simulation results highlight that for the internal overpressure,the distribution of methane has no effect on the first overpressure peak(ΔP1),while it significantly influences the subsequent overpressure peak(ΔP2),and the maximum difference between the overpressure of homogeneous and inhomogeneous distribution is174.3%.Moreover,the initial concentration distribution also has a certain impact on the external overpressure.展开更多
Creep ageing forming(CAF)has been widely used in the aerospace engineering,but how to optimize the processing conditions,especially under complex stress state of the CAF process for large-size components produced by f...Creep ageing forming(CAF)has been widely used in the aerospace engineering,but how to optimize the processing conditions,especially under complex stress state of the CAF process for large-size components produced by friction-stir welding is still a great challenge to now.In this work,the creep ageing behaviors and underlying microstructure evolution of a thick friction-stir welded Al-Cu alloy plate after CAF process under different stress levels are systematically investigated.The creep strain and the strength of the joint are both significantly increased when the stress is close to the average yield strength of the initial weld joint.The grain size reduces while the local strain and dislocation density increase from top to bottom of the NZ;hence,the bottom layer of the weld joint exhibits higher creep strain and steady-stage creep strain rate during the CAF process.The results reveal that the gradient microstructures sensitive to the stress level effectively govern the creep-ageing performance from the upper to the bottom layer in a thick friction stir welded Al-Cu alloy plate.Rationally increasing the initial dislocation density of the weld joint can both enhance the tensile properties and promote the creep deformation of the weld joint for CAF process.展开更多
Electromagnetic scattering from targets situated in half space is solved by applying fast inhomogeneous plane wave algorithm combined with a tabulation and interpolation method. The integral equation is set up based o...Electromagnetic scattering from targets situated in half space is solved by applying fast inhomogeneous plane wave algorithm combined with a tabulation and interpolation method. The integral equation is set up based on derivation of dyadic Green＇s functions in this environment. The coupling is divided into nearby region and well-separated region by grouping. The Green＇s function can be divided into two parts： primary term and reflected term. In the well-separated region, the two terms are both expressed as Sommerfeld integral, which can be accelerated by deforming integral path and taking interpolation and extrapolation. For the nearby region, the direct Sommerfeld integral makes the filling of impedance matrix time-expensive. A tabulation and interpolation method is applied to speed up this process. This infinite integral is pre-computed in sampling region, and a two-dimensional table is then set up. The impedance elements can then be obtained by interpolation. Numerical results demonstrate the accuracy and efficiency of this algorithm.展开更多
Ubiquitous computing must incorporate a certain level of security. For the severely resource constrained applications, the energy-efficient and small size cryptography algorithm implementation is a critical problem. H...Ubiquitous computing must incorporate a certain level of security. For the severely resource constrained applications, the energy-efficient and small size cryptography algorithm implementation is a critical problem. Hardware implementations of the advanced encryption standard （AES） for authentication and encryption are presented. An energy consumption variable is derived to evaluate low-power design strategies for battery-powered devices. It proves that compact AES architectures fail to optimize the AES hardware energy, whereas reducing invalid switching activities and implementing power-optimized sub-modules are the reasonable methods. Implementations of different substitution box （S-Boxes） structures are presented with 0.25μm 1.8 V CMOS （complementary metal oxide semiconductor） standard cell library. The comparisons and trade-offs among area, security, and power are explored. The experimental results show that Galois field composite S-Boxes have smaller size and highest security but consume considerably more power, whereas decoder-switch-encoder S-Boxes have the best power characteristics with disadvantages in terms of size and security. The combination of these two type S-Boxes instead of homogeneous S-Boxes in AES circuit will lead to optimal schemes. The technique of latch-dividing data path is analyzed, and the quantitative simulation results demonstrate that this approach diminishes the glitches effectively at a very low hardware cost.展开更多
Axon branching enables neurons to contact with multiple targets and respond to their microenvironment.Owing to its importance in neuronal network formation,axon branching has been studied extensively during the past d...Axon branching enables neurons to contact with multiple targets and respond to their microenvironment.Owing to its importance in neuronal network formation,axon branching has been studied extensively during the past decades.It is reported that ECM(Extra Cellular Matrix)components such as laminin,collagen,and tenascin regulate the morphology and motility of neuronal growth cones in culture,but the effects of their distribution and the change of density on axon branching are not well understood.We fabricated chemically homogeneous substrate by microcontact printing(μCP)and inhomogeneous substrate with different laminin density展开更多
The root mean square(RMS) difference of time-lapse seismic amplitudes is routinely used to identify the substituted fluid type in a reservoir during oil field production and recovery. By a time-lapse seismic method, w...The root mean square(RMS) difference of time-lapse seismic amplitudes is routinely used to identify the substituted fluid type in a reservoir during oil field production and recovery. By a time-lapse seismic method, we study the effects of fluid substitution in a physical model, which is an analogy of the three-dimensional inhomogeneous reservoir. For a weak inhomogeneous medium, gas/oil substitution results in positive anomalies in the reservoir layers, and negative anomalies below the bottom of the reservoir layers; while water/oil substitution causes only weak variations in the reservoir layers, but positive anomalies below the bottom of the reservoir layers. For the strong inhomogeneous medium, no matter what kind of fluid substitution(gas/oil or water/oil), there are significant anomalies in seismic amplitude difference attributes both in and below the reservoir layers. Therefore, for weak inhomogeneous media, such as tight sandstone or thin interbedded layers, the RMS amplitude difference attributes can be used to monitor fluid changes and predict the drilling direction; for inhomogeneous medium with karst carves or fractures, it is difficult to accurately determine the distribution of fluids with the RMS amplitude difference attributes.展开更多
A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of ...A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of misfit dislocation dipole and the solution of equilibrium position were given.The influence of the ratio of shear modulus,the misfit strain and viscosity on the equilibrium of the dislocation and critical parameter of inhomogeneity was investigated.The result shows that the equilibrium position de increases with the increase of the ratio of original shear modulus and the effect decreases with the increase of viscosity of matrix.Along with the increase of viscosity of matrix,de first increases and then decreases and possesses maximum value when t=0.3τ and tends to a stable value when t≥1.0τ.Along with the increase of viscosity of matrix,Rc first decreases and then increases and possesses minimum value when t=0.3τ and tends to a stable value when t≥1.0τ.展开更多
Due to the current trend towards lightweight design in automotive industry,hollow stepped gear shafts for automobile and its radial forging process are widely investigated.Utilizing coupled finite element thermo-mecha...Due to the current trend towards lightweight design in automotive industry,hollow stepped gear shafts for automobile and its radial forging process are widely investigated.Utilizing coupled finite element thermo-mechanical model,radial forging process of a hollow stepped gear shaft for automobile was simulated.The optimal combination of three process parameters including initial temperature,rotation rate and radial reduction was also selected using orthogonal design method.To examine the strain inhomogeneity of the forging workpiece,the strain inhomogeneity factor was introduced.The results reveal that the maximum effective strain and the minimum effective strain appeared in the outermost and innermost zones of different cross sections for the hollow stepped gear shaft,respectively.Optimal forging parameters are determined as a combination of initial temperature of 780°C,rotation rate of 21°/stroke and radial reduction of 3 mm.展开更多
Based on the active failure mechanism generated by a spatial discretization technique, the stability of tunnel face was studied. With the help of the spatial discretization technique, not only the anisotropy and inhom...Based on the active failure mechanism generated by a spatial discretization technique, the stability of tunnel face was studied. With the help of the spatial discretization technique, not only the anisotropy and inhomogeneity of the cohesion but also the inhomogeneity of the internal friction angle was taken into account in the analysis of the supporting forces. From the perspective of upper bound theorem, the upper bound solutions of supporting pressure were derived. The influence of the anisotropy and heterogeneity on the supporting forces as well as the failure mechanisms was discussed. The results show that the spatial discretization characteristics of cohesion and internal frictional angle impose a significant effect on the supporting pressure, which indicates that above factors should be considered in the actual engineering.展开更多
A method combining the pseudo-dynamic approach and discretization technique is carried out for computing the active earth pressure.Instead of using a presupposed failure mechanism,discretization technique is introduce...A method combining the pseudo-dynamic approach and discretization technique is carried out for computing the active earth pressure.Instead of using a presupposed failure mechanism,discretization technique is introduced to generate the potential failure surface,which is applicable to the case that soil strength parameters have spatial variability.For the purpose of analyzing the effect of earthquake,pseudo-dynamic approach is adopted to introduce the seismic forces,which can take into account the dynamic properties of seismic acceleration.A new type of micro-element is used to calculate the rate of work of external forces and the rate of internal energy dissipation.The analytical expression of seismic active earth pressure coefficient is deduced in the light of upper bound theorem and the corresponding upper bound solutions are obtained through numerical optimization.The method is validated by comparing the results of this paper with those reported in literatures.The parametric analysis is finally presented to further expound the effect of diverse parameters on active earth pressure under non-uniform soil.展开更多
Based on the explicit finite element(FE) method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional(2D) FE nonlinear an...Based on the explicit finite element(FE) method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional(2D) FE nonlinear analytical model for Fuzhou Basin was established.The peak ground motion acceleration(PGA) and focusing effect with depth were analyzed.Meanwhile,the results by wave propagation of one-dimensional(1D) layered medium equivalent linearization method were added for contrast.The results show that:1) PGA at different depths are obviously amplified compared to the input ground motion,amplification effect of both funnel-shaped depression and upheaval areas(based on the shape of bedrock surface) present especially remarkable.The 2D results indicate that the PGA displays a non-monotonic decreasing with depth and a greater focusing effect of some particular layers,while the 1D results turn out that the PGA decreases with depth,except that PGA at few particular depth increases abruptly; 2) To the funnel-shaped depression areas,PGA amplification effect above 8 m depth shows relatively larger,to the upheaval areas,PGA amplification effect from 15 m to 25 m depth seems more significant.However,the regularities of the PGA amplification effect could hardly be found in the rest areas; 3) It appears a higher regression rate of PGA amplification coefficient with depth when under a smaller input motion; 4) The frequency spectral characteristic of input motion has noticeable effects on PGA amplification tendency.展开更多
Based on mesoscopic damage mechanics, numerical code RFPA2D （dynamic edition） was developed to analyze the influence of tunnel reinforcing on failure process of surrounding rock under explosive stress waves. The res...Based on mesoscopic damage mechanics, numerical code RFPA2D （dynamic edition） was developed to analyze the influence of tunnel reinforcing on failure process of surrounding rock under explosive stress waves. The results show that the propagation phenomenon of stress wave in the surrounding rock of tunnel and the failure process of surrounding rock under explosive stress waves are reproduced realistically by using numerical code RFPA2O; from the failure process of surrounding rock, the place at which surrounding rock fractures is transferred because of tunnel reinforcing, and the rockfall and collapse caused by failure of surrounding rock are restrained by tunnel reinforcing; furthermore, the absolute values of peak values of major principal stress, and the minimal principal stress and shear stress at center point of tunnel roof are reduced because of tunnel reinforcing, and the displacement at center point of runnel roof is reduced as well, consequently the stability of tunnel increases.展开更多
Local inhomogeneity in totally asymmetric simple exclusion processes （TASEPs） with different hopping rates was studied. Many biological and chemical phenomena can be described by these non-equilibrium processes. A s...Local inhomogeneity in totally asymmetric simple exclusion processes （TASEPs） with different hopping rates was studied. Many biological and chemical phenomena can be described by these non-equilibrium processes. A simple approximate theory and extensive Monte Carlo computer simulations were used to calculate the steady-state phase diagrams and bulk densities. It is found that the phase diagram for local inhomogeneity in TASEP with different hopping rates p is qualitatively similar to homogeneous models. Interestingly, there is a saturation point pair （a＊, fl＊） for the system, which is decided by parameters p and q. There are three stationary phases in the system, when parameter p is fixed （i.e., p=0.8）, with the increase of the parameter q, the region of LD/LD and HD/HD phase increases and the HD/LD is the only phase which the region shrinks. The analytical results are in good agreement with simulations.展开更多
For the manufacture of S-type thermocouple the so-called thermocouple wire of platinum and platinum-rhodium alloy is used.One of the main technical requirements for the quality of the wire,according to State Standard ...For the manufacture of S-type thermocouple the so-called thermocouple wire of platinum and platinum-rhodium alloy is used.One of the main technical requirements for the quality of the wire,according to State Standard of Russia(GOST 10821),is the uniformity of its largest thermoelectric force(Thermo-emf) in the length different sections.It was found that a determining impact on the uniformity of the wire thermo-emf is the distribution of rhodium along the length of the wire.The impact of platinum-rhodium melt crystallization conditions on the inhomogeneity of wire manufactured from it.It was suggested that the chemical inhomogeneity of the wire is related to the liquation phase of platinum-rhodium alloy.展开更多
A variational inhomogeneous image segmentation model based on fuzzy membership functions and Retinex theory is proposed by introducing the fuzzy membership function.The existence of the solution of the proposed model ...A variational inhomogeneous image segmentation model based on fuzzy membership functions and Retinex theory is proposed by introducing the fuzzy membership function.The existence of the solution of the proposed model is proved theoretically.A valid algorithm is designed to make numerical solution of the model under the framework of alternating minimization.The last experimental results show that the model can make segmentation of the real image with intensity inhomogeneity effectively.展开更多
基金Project(51378510)supported by the National Natural Science Foundation of China
文摘Stability assessment of slopes has historically been performed assuming soils to be homogeneous in two-dimensional(2D) cases. In real cases, soils are usually inhomogeneous, and each slope collapse indicates a three-dimensional(3D) nature. Based on a 3D rotational failure mechanism, this work develops an approach to account for the impact of the vertical strength inhomogeneity on the 3D stability of stepped slopes. Seismic actions are taken into account by introducing the concept of a horizontal seismic coefficient. An upper-bound expression for stability factors is derived in the light of the kinematic approach, and the most critical solution is obtained from an optimization programming. In comparison with the previously published solutions, the validity of the proposed method is shown. A sensitivity analysis is carried out to discuss parametric effects on the stability of 3D stepped inhomogeneous slopes.
基金Projects(61401476,61201166)supported by the National Natural Science Foundation of China
文摘Most of studies on network capacity are based on the assumption that all the nodes are uniformly distributed, which means that the networks are characterized by homogeneity. However, many realistic networks exhibit inhomogeneity due to natural and man-made reasons. In this work, the capacity of inhomogeneous hybrid networks with directional antennas for the first time is studied. By setting different node distribution probabilities, the whole network can be devided into dense cells and sparse cells. On this basis, an inhomogeneous hybrid network model is proposed. The network can exhibit significant inhomogeneity due to the coexistence of two types of cells. Then, we derive the network capacity and maximize the capacity under different channel allocation schemes. Finally, how the network parameters influence the network capacity is analyzed. It is found that if there are plenty of base stations, the per-node throughput can achieve constant order, and if the beamwidth of directional antenna is small enough, the network capacity can scale.
基金the financial support from National Natural Science Foundation of China(Grant No.52378488)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX22_0222)。
文摘The gas explosion in residential building has always been a highly concerned problem.Explosions in homogeneous mixtures have been extensively studied.However,mixtures are often inhomogeneous in the practical scenarios due to the differences in the densities of methane and air.In order to investigate the effects of gas explosions in inhomogeneous mixtures,experimental studies involving gas leakage and explosion are conducted in a full-scale residential building to reproduce the process of gas explosion.By fitting the dimensionless buoyancy as a function of dimensionless height and dimensionless time,a distribution model of gas in large-scale spaces is established,and the mechanism of inhomogeneous distribution of methane is also be revealed.Furthermore,the stratified reconstruction method(SRM)is introduced for efficiently setting up inhomogeneous concentration fields in FLACS.The simulation results highlight that for the internal overpressure,the distribution of methane has no effect on the first overpressure peak(ΔP1),while it significantly influences the subsequent overpressure peak(ΔP2),and the maximum difference between the overpressure of homogeneous and inhomogeneous distribution is174.3%.Moreover,the initial concentration distribution also has a certain impact on the external overpressure.
基金Project(2021YFB3400903) supported by the National Key R&D Program of ChinaProject(1053320211480) supported by the Science and Technology Innovation Project of Graduate Students of Central South University,China。
文摘Creep ageing forming(CAF)has been widely used in the aerospace engineering,but how to optimize the processing conditions,especially under complex stress state of the CAF process for large-size components produced by friction-stir welding is still a great challenge to now.In this work,the creep ageing behaviors and underlying microstructure evolution of a thick friction-stir welded Al-Cu alloy plate after CAF process under different stress levels are systematically investigated.The creep strain and the strength of the joint are both significantly increased when the stress is close to the average yield strength of the initial weld joint.The grain size reduces while the local strain and dislocation density increase from top to bottom of the NZ;hence,the bottom layer of the weld joint exhibits higher creep strain and steady-stage creep strain rate during the CAF process.The results reveal that the gradient microstructures sensitive to the stress level effectively govern the creep-ageing performance from the upper to the bottom layer in a thick friction stir welded Al-Cu alloy plate.Rationally increasing the initial dislocation density of the weld joint can both enhance the tensile properties and promote the creep deformation of the weld joint for CAF process.
文摘Electromagnetic scattering from targets situated in half space is solved by applying fast inhomogeneous plane wave algorithm combined with a tabulation and interpolation method. The integral equation is set up based on derivation of dyadic Green＇s functions in this environment. The coupling is divided into nearby region and well-separated region by grouping. The Green＇s function can be divided into two parts： primary term and reflected term. In the well-separated region, the two terms are both expressed as Sommerfeld integral, which can be accelerated by deforming integral path and taking interpolation and extrapolation. For the nearby region, the direct Sommerfeld integral makes the filling of impedance matrix time-expensive. A tabulation and interpolation method is applied to speed up this process. This infinite integral is pre-computed in sampling region, and a two-dimensional table is then set up. The impedance elements can then be obtained by interpolation. Numerical results demonstrate the accuracy and efficiency of this algorithm.
基金the "863" High Technology Research and Development Program of China (2006AA01Z226)the Scientific Research Foundation of Huazhong University of Science and Technology (2006Z011B)the Program for New Century Excellent Talents in University (NCET-07-0328).
文摘Ubiquitous computing must incorporate a certain level of security. For the severely resource constrained applications, the energy-efficient and small size cryptography algorithm implementation is a critical problem. Hardware implementations of the advanced encryption standard （AES） for authentication and encryption are presented. An energy consumption variable is derived to evaluate low-power design strategies for battery-powered devices. It proves that compact AES architectures fail to optimize the AES hardware energy, whereas reducing invalid switching activities and implementing power-optimized sub-modules are the reasonable methods. Implementations of different substitution box （S-Boxes） structures are presented with 0.25μm 1.8 V CMOS （complementary metal oxide semiconductor） standard cell library. The comparisons and trade-offs among area, security, and power are explored. The experimental results show that Galois field composite S-Boxes have smaller size and highest security but consume considerably more power, whereas decoder-switch-encoder S-Boxes have the best power characteristics with disadvantages in terms of size and security. The combination of these two type S-Boxes instead of homogeneous S-Boxes in AES circuit will lead to optimal schemes. The technique of latch-dividing data path is analyzed, and the quantitative simulation results demonstrate that this approach diminishes the glitches effectively at a very low hardware cost.
基金financial support is provided by the National Science Foundation of China(50902025, 20890020 and 90813032)the Ministry of Science and Technology of China(2009CB93001 and 2007CB714502)the Chinese Academy of Sciences,and the Human Frontier Science Program
文摘Axon branching enables neurons to contact with multiple targets and respond to their microenvironment.Owing to its importance in neuronal network formation,axon branching has been studied extensively during the past decades.It is reported that ECM(Extra Cellular Matrix)components such as laminin,collagen,and tenascin regulate the morphology and motility of neuronal growth cones in culture,but the effects of their distribution and the change of density on axon branching are not well understood.We fabricated chemically homogeneous substrate by microcontact printing(μCP)and inhomogeneous substrate with different laminin density
基金Project(2013CB228600)supported by the National Basic Research Program of China
文摘The root mean square(RMS) difference of time-lapse seismic amplitudes is routinely used to identify the substituted fluid type in a reservoir during oil field production and recovery. By a time-lapse seismic method, we study the effects of fluid substitution in a physical model, which is an analogy of the three-dimensional inhomogeneous reservoir. For a weak inhomogeneous medium, gas/oil substitution results in positive anomalies in the reservoir layers, and negative anomalies below the bottom of the reservoir layers; while water/oil substitution causes only weak variations in the reservoir layers, but positive anomalies below the bottom of the reservoir layers. For the strong inhomogeneous medium, no matter what kind of fluid substitution(gas/oil or water/oil), there are significant anomalies in seismic amplitude difference attributes both in and below the reservoir layers. Therefore, for weak inhomogeneous media, such as tight sandstone or thin interbedded layers, the RMS amplitude difference attributes can be used to monitor fluid changes and predict the drilling direction; for inhomogeneous medium with karst carves or fractures, it is difficult to accurately determine the distribution of fluids with the RMS amplitude difference attributes.
基金Project(10472030) supported by the National Natural Science Foundation of China
文摘A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of misfit dislocation dipole and the solution of equilibrium position were given.The influence of the ratio of shear modulus,the misfit strain and viscosity on the equilibrium of the dislocation and critical parameter of inhomogeneity was investigated.The result shows that the equilibrium position de increases with the increase of the ratio of original shear modulus and the effect decreases with the increase of viscosity of matrix.Along with the increase of viscosity of matrix,de first increases and then decreases and possesses maximum value when t=0.3τ and tends to a stable value when t≥1.0τ.Along with the increase of viscosity of matrix,Rc first decreases and then increases and possesses minimum value when t=0.3τ and tends to a stable value when t≥1.0τ.
基金Projects(51774054,51974050)supported by the National Natural Science Foundation of China。
文摘Due to the current trend towards lightweight design in automotive industry,hollow stepped gear shafts for automobile and its radial forging process are widely investigated.Utilizing coupled finite element thermo-mechanical model,radial forging process of a hollow stepped gear shaft for automobile was simulated.The optimal combination of three process parameters including initial temperature,rotation rate and radial reduction was also selected using orthogonal design method.To examine the strain inhomogeneity of the forging workpiece,the strain inhomogeneity factor was introduced.The results reveal that the maximum effective strain and the minimum effective strain appeared in the outermost and innermost zones of different cross sections for the hollow stepped gear shaft,respectively.Optimal forging parameters are determined as a combination of initial temperature of 780°C,rotation rate of 21°/stroke and radial reduction of 3 mm.
基金Project(2013CB036004) supported by the National Basic Research Program of ChinaProjects(51178468,51378510) supported by the National Natural Science Foundation of China
文摘Based on the active failure mechanism generated by a spatial discretization technique, the stability of tunnel face was studied. With the help of the spatial discretization technique, not only the anisotropy and inhomogeneity of the cohesion but also the inhomogeneity of the internal friction angle was taken into account in the analysis of the supporting forces. From the perspective of upper bound theorem, the upper bound solutions of supporting pressure were derived. The influence of the anisotropy and heterogeneity on the supporting forces as well as the failure mechanisms was discussed. The results show that the spatial discretization characteristics of cohesion and internal frictional angle impose a significant effect on the supporting pressure, which indicates that above factors should be considered in the actual engineering.
基金Projects(51908557,51378510)supported by the National Natural Science Foundation of China。
文摘A method combining the pseudo-dynamic approach and discretization technique is carried out for computing the active earth pressure.Instead of using a presupposed failure mechanism,discretization technique is introduced to generate the potential failure surface,which is applicable to the case that soil strength parameters have spatial variability.For the purpose of analyzing the effect of earthquake,pseudo-dynamic approach is adopted to introduce the seismic forces,which can take into account the dynamic properties of seismic acceleration.A new type of micro-element is used to calculate the rate of work of external forces and the rate of internal energy dissipation.The analytical expression of seismic active earth pressure coefficient is deduced in the light of upper bound theorem and the corresponding upper bound solutions are obtained through numerical optimization.The method is validated by comparing the results of this paper with those reported in literatures.The parametric analysis is finally presented to further expound the effect of diverse parameters on active earth pressure under non-uniform soil.
基金Project(2011CB013601) supported by the National Basic Research Program of ChinaProject(51378258) supported by the National Natural Science Foundation of China
文摘Based on the explicit finite element(FE) method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional(2D) FE nonlinear analytical model for Fuzhou Basin was established.The peak ground motion acceleration(PGA) and focusing effect with depth were analyzed.Meanwhile,the results by wave propagation of one-dimensional(1D) layered medium equivalent linearization method were added for contrast.The results show that:1) PGA at different depths are obviously amplified compared to the input ground motion,amplification effect of both funnel-shaped depression and upheaval areas(based on the shape of bedrock surface) present especially remarkable.The 2D results indicate that the PGA displays a non-monotonic decreasing with depth and a greater focusing effect of some particular layers,while the 1D results turn out that the PGA decreases with depth,except that PGA at few particular depth increases abruptly; 2) To the funnel-shaped depression areas,PGA amplification effect above 8 m depth shows relatively larger,to the upheaval areas,PGA amplification effect from 15 m to 25 m depth seems more significant.However,the regularities of the PGA amplification effect could hardly be found in the rest areas; 3) It appears a higher regression rate of PGA amplification coefficient with depth when under a smaller input motion; 4) The frequency spectral characteristic of input motion has noticeable effects on PGA amplification tendency.
基金Projects(50874020, 50504005 and 50490274) supported by the National Natural Science Foundation of ChinaPorject(2007CB209407) supported by Major State Basic Research Development Program of ChinaProject(2005038250) supported by Postdoctoral Science Foundation of China
文摘Based on mesoscopic damage mechanics, numerical code RFPA2D （dynamic edition） was developed to analyze the influence of tunnel reinforcing on failure process of surrounding rock under explosive stress waves. The results show that the propagation phenomenon of stress wave in the surrounding rock of tunnel and the failure process of surrounding rock under explosive stress waves are reproduced realistically by using numerical code RFPA2O; from the failure process of surrounding rock, the place at which surrounding rock fractures is transferred because of tunnel reinforcing, and the rockfall and collapse caused by failure of surrounding rock are restrained by tunnel reinforcing; furthermore, the absolute values of peak values of major principal stress, and the minimal principal stress and shear stress at center point of tunnel roof are reduced because of tunnel reinforcing, and the displacement at center point of runnel roof is reduced as well, consequently the stability of tunnel increases.
基金Project(2011FZ050) supported by Applied Basic Research Program of Yunnan Provincial Science and Technology Department,ChinaProject(2011J084) supported by Master Program of Yunnan Province Education Department,China
文摘Local inhomogeneity in totally asymmetric simple exclusion processes （TASEPs） with different hopping rates was studied. Many biological and chemical phenomena can be described by these non-equilibrium processes. A simple approximate theory and extensive Monte Carlo computer simulations were used to calculate the steady-state phase diagrams and bulk densities. It is found that the phase diagram for local inhomogeneity in TASEP with different hopping rates p is qualitatively similar to homogeneous models. Interestingly, there is a saturation point pair （a＊, fl＊） for the system, which is decided by parameters p and q. There are three stationary phases in the system, when parameter p is fixed （i.e., p=0.8）, with the increase of the parameter q, the region of LD/LD and HD/HD phase increases and the HD/LD is the only phase which the region shrinks. The analytical results are in good agreement with simulations.
文摘For the manufacture of S-type thermocouple the so-called thermocouple wire of platinum and platinum-rhodium alloy is used.One of the main technical requirements for the quality of the wire,according to State Standard of Russia(GOST 10821),is the uniformity of its largest thermoelectric force(Thermo-emf) in the length different sections.It was found that a determining impact on the uniformity of the wire thermo-emf is the distribution of rhodium along the length of the wire.The impact of platinum-rhodium melt crystallization conditions on the inhomogeneity of wire manufactured from it.It was suggested that the chemical inhomogeneity of the wire is related to the liquation phase of platinum-rhodium alloy.
文摘A variational inhomogeneous image segmentation model based on fuzzy membership functions and Retinex theory is proposed by introducing the fuzzy membership function.The existence of the solution of the proposed model is proved theoretically.A valid algorithm is designed to make numerical solution of the model under the framework of alternating minimization.The last experimental results show that the model can make segmentation of the real image with intensity inhomogeneity effectively.
