[Objective]The construction of weirs changes the hydraulic characteristics of rivers and affects the structure of phytoplankton communities and the health of aquatic ecosystems in the river.This study aims to explore ...[Objective]The construction of weirs changes the hydraulic characteristics of rivers and affects the structure of phytoplankton communities and the health of aquatic ecosystems in the river.This study aims to explore the nonlinear response relationship between phytoplankton community structure and its driving factors in spring and autumn in Furong Creek under the construction of cascade weirs.[Methods]The structure of phytoplankton communities and related environmental factors were investigated in Furong Creek from 2023 to 2024.This study focused on the analysis of the changes of nutrient concentrations and biomass of phytoplankton in autumn and spring within the same dry season in Furong Creek.Redundancy analysis was used to identify the key factors influencing the structure of phytoplankton communities.The MIKE 11 model was employed to simulate the hydrodynamic changes in the river.Combined with total nitrogen and permanganate index,a GAM model of phytoplankton diversity index and hydrodynamic factors was developed,and the change of phytoplankton diversity after the optimized layout of the cascade weirs was fitted.[Results]The result showed that the annual average value of Shannon-Wiener diversity index of phytoplankton in Furong Creek was 2.79,which was in a state of mild pollution.A total of 239 species from 95 genera in 8 phyla were identified.Among the phytoplankton,Chlorophyta was the dominant group throughout the year in Furong Creek,followed by Bacillariophyta and Cyanophyta.The cell abundance of phytoplankton ranged from 3.11 to 20.64 mg/L and from 0.23 to 6.31 mg/L in spring and autumn,which indicated a clear seasonal succession of phytoplankton community structure.Compared with autumn,the relative abundance of Cyanophyta significantly decreased in spring across the whole river section,while Chrysophyta and Dinophyta showed significant increase at some monitoring sites,leading to water bloom phenomenon and a noticeable decline in the diversity of phytoplankton.The dominant species in the water bodies throughout the year were Cyclotella catenata,Chlorella vulgaris,Scenedesmus bijuga,Scenedesmus quadricauda,Chroomonas acuta,Cryptomonas ovata,and Cryptomonas erosa.Redundancy analysis(RDA)showed that hydrodynamic factors(v,h)and water environmental factors(TN,COD_(Mn))were the main influencing factors of phytoplankton community structure.[Conclusion]The result show that the nutrient concentration,phytoplankton biomass,and density in Furong Creek in spring are significantly higher than in autumn.The GAM model,constructed by combining hydrodynamic and environmental factors,can effectively reflect the nonlinear relationship between phytoplankton diversity index and its driving factors.In spring,with an increase in nutrient concentration,the habitat conditions of low flow speed and high water depths formed by overflow weirs will lead to a decrease in the Shannon-Wiener index of phytoplankton and an intensified risk of eutrophication.However,a reasonable layout scheme of cascade weirs will improve the diversity of phytoplankton and reduce the risk of eutrophication in the river.The findings of this study can help deepen the understanding of the ecological and environmental effects of cascade weir construction in the river.展开更多
The subversive nature of information war lies not only in the information itself, but also in the circulation and application of information. It has always been a challenge to quantitatively analyze the function and e...The subversive nature of information war lies not only in the information itself, but also in the circulation and application of information. It has always been a challenge to quantitatively analyze the function and effect of information flow through command, control, communications, computer, kill, intelligence,surveillance, reconnaissance (C4KISR) system. In this work, we propose a framework of force of information influence and the methods for calculating the force of information influence between C4KISR nodes of sensing, intelligence processing,decision making and fire attack. Specifically, the basic concept of force of information influence between nodes in C4KISR system is formally proposed and its mathematical definition is provided. Then, based on the information entropy theory, the model of force of information influence between C4KISR system nodes is constructed. Finally, the simulation experiments have been performed under an air defense and attack scenario. The experimental results show that, with the proposed force of information influence framework, we can effectively evaluate the contribution of information circulation through different C4KISR system nodes to the corresponding tasks. Our framework of force of information influence can also serve as an effective tool for the design and dynamic reconfiguration of C4KISR system architecture.展开更多
The coupling model of major influence factors such state affecting the chloride diffusion process in concrete is as environmental relative humidity, load-induced crack and stress discussed. The probability distributio...The coupling model of major influence factors such state affecting the chloride diffusion process in concrete is as environmental relative humidity, load-induced crack and stress discussed. The probability distributions of the critical chloride concentration Cc, the chloride diffusion coefficient D, and the surface chloride concentration Cs were determined based on the collected natural exposure data. And the estimation of probability of corrosion initiation considering the coupling effects of influence factors is presented. It is found that the relative humidity and curing time are the most effective factors affecting the probability of corrosion initiation before and after 10 years of exposure time. At the same exposure time, the influence of load-induced crack and stress state on the probability of corrosion initiation is obvious, in which the effect of crack is the most one展开更多
Cantilever casting concrete arch bridge using form traveller has a broad application prospect.However,it is difficult to obtain reasonable initial cable force in construction stage.In this study,stress balance and inf...Cantilever casting concrete arch bridge using form traveller has a broad application prospect.However,it is difficult to obtain reasonable initial cable force in construction stage.In this study,stress balance and influence matrix methods were developed to determine the initial cable force of cantilever casting concrete arch bridge.The stress balance equation and influence matrix of arch rib critical section were established,and the buckle cable force range was determined by the allowable stress of arch rib critical section.Then a group of buckle cable forces were selected and substituted into the stress balance equation,and the reasonable initial buckle cable force was determined through iteration.Based on the principle of force balance,the initial anchor cable force was determined.In an engineering application example,it is shown that the stress balance and influence matrix methods for the determination of initial cable force are feasible and reliable.The initial cable forces of arch rib segments only need to be adjusted once in the corresponding construction process,which improves the working efficiency and reduces the construction risk.It is found that the methods have great advantages for determining initial cable force in cantilever casting construction process of concrete arch bridge.展开更多
A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision pr...A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision process, and contains a point-mass model for the dynamics of an aircraft and takes into account the decision maker＇s preferences under uncertain conditions. Considering an active opponent, the opponent＇s maneuvers can be modeled stochastically. The solution of multistage influence diagram can be obtained by converting the multistage influence diagram into a two-level optimization problem. The simulation results show the model is effective.展开更多
A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arse...A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arsenic in selected samples were evaluated. Arsenic contents in all input and output samples vary from 0.11% in raw lead to 6.66% in collected dust-2. More arsenic is volatilized in blast furnace and fuming furnace(73.02% of arsenic input) than bottom blowing furnace(10.29% of arsenic input).There are 78.97%, 13.69%, 7.31% of total arsenic distributed in intermediate materials, stockpiled materials and unorganized emissions, respectively. Matte slag-2, collected dust-1 and secondary zinc oxide are hazardous based on the arsenic concentrations of toxicity characteristic leaching procedure. According to risk assessment code(RAC) guideline, arsenic in collected dust-1 poses a very serious risk to the surrounding environment, arsenic in speiss, matte slag-2, water-quenched slag and secondary zinc oxide show low risk, while arsenic in matte slag-1, collected dust-2 and post dust has no risk to the environment.展开更多
In this article, authors introduce a method to assess local influence of obser- vations on the parameter estimates and prediction in multivariate regression model. The diagnostics under the perturbations of error vari...In this article, authors introduce a method to assess local influence of obser- vations on the parameter estimates and prediction in multivariate regression model. The diagnostics under the perturbations of error variance, response variables and explanatory variables are derived, and the results are compared with those of case- deletion. Two examples are analyzed for illustration.展开更多
System of systems architecture（SoSA） has received increasing emphasis by scholars since Zachman ignited its flame in 1987. Given its complexity and abstractness, it is critical to validate and evaluate SoSA to ensur...System of systems architecture（SoSA） has received increasing emphasis by scholars since Zachman ignited its flame in 1987. Given its complexity and abstractness, it is critical to validate and evaluate SoSA to ensure requirements have been met.Multiple qualities are discussed in the literature of SoSA evaluation, while research on functionality is scarce. In order to assess SoSA functionality, an extended influence diagram（EID） is developed in this paper. Meanwhile, a simulation method is proposed to elicit the conditional probabilities in EID through designing and executing SoSA. An illustrative anti-missile architecture case is introduced for EID development, architecture design, and simulation.展开更多
In this work it is shown that the kinetic energy and the exchange-correlation energy are mutual dependent on each other.This aspect is first derived in an orbital-free context.It is shown that the total Fermi potentia...In this work it is shown that the kinetic energy and the exchange-correlation energy are mutual dependent on each other.This aspect is first derived in an orbital-free context.It is shown that the total Fermi potential depends on the density only,the individual parts,the Pauli kinetic energy and the exchange-correlation energy,however,are orbital dependent and as such mutually influence each other.The numerical investigation is performed for the orbital-based non-interacting Kohn-Sham system in order to avoid additional effects due to further approximations of the kinetic energy.The numerical influence of the exchange-correlation functional on the non-interacting kinetic energy is shown to be of the orderof a few Hartrees.For chemical purposes,however,the energetic performance as a function of the nuclear coordinates is much more important than total energies.Therefore,the effect on the bond dissociation curve was studied exemplarily for the carbon monoxide.The data reveals that,the mutual influence between the exchange-correlation functional and the kinetic energy has a significant influence on bond dissociation energies and bond distances.Therefore,the effect of the exchange-correlation treatment must be considered in the design of orbital-free density functional approximations for the kinetic energy.展开更多
The heavy metals in the atmosphere mainly come from the gas and dust which involved by the energy costs,transport,metallurgy and building materials production.Other than the element of Hg,the heavy metals come into th...The heavy metals in the atmosphere mainly come from the gas and dust which involved by the energy costs,transport,metallurgy and building materials production.Other than the element of Hg,the heavy metals come into the atmosphere in the form of aerosol basically and go into the soil through展开更多
“The Belt and Road”(abb.B & R) Initiative reflects the essence of Chinese traditional culture -“harmony is precious”.Although the countries along B&R share the cultural legacy of the ancient silk roads,the...“The Belt and Road”(abb.B & R) Initiative reflects the essence of Chinese traditional culture -“harmony is precious”.Although the countries along B&R share the cultural legacy of the ancient silk roads,the economic development,ethnic characteristics and religious beliefs of the countries today vary dramatically.Since the beginning of the new century,China has carried out the strategy of “Going Global” in culture,striving to enhance the radiating power of Chinese culture in the world and the power of influence at the international level.Starting from exploring resources of publicity from B&R areas,developing counterpart cultural products,expanding channels of communication,improving service facilities and other strategies,the country has developed and improved channels for cultural communication and is striving to establish a new system of all-round,multi-level and effective communication.Meanwhile,under the support of international cultural organizations and institutions,by making good use of international platforms,the country hopes to explore new development concepts and models of Chinese culture,and to promote cultural identity between different regions,to enhance the international influence of national culture through its active participation in national cultural activities and active identification to the junction point.展开更多
According to the concept of virtual bending force,a rational explanation for SHOHET's model was presented. Considering the deformation characters of the work rolls in four-high mill,the deformation model of the wo...According to the concept of virtual bending force,a rational explanation for SHOHET's model was presented. Considering the deformation characters of the work rolls in four-high mill,the deformation model of the work roll was regarded as a cantilever beam and new influence coefficients were deduced.The effect of the bending force was taken into account independently. Therefore,the contribution to work roll deflection caused by rolling load,rolling pressure between rolls and bending force can be got from the new formulas.To validate the accuracy of the formulas,the results obtained from the new formulas were compared with those from SHOHET's formulas.It is found that they highly coincide,which illustrates that the formulas are reliable.展开更多
The semiclassical transport equations are used to study the high frequency performance of AlGaAs / GaAs HBTs. Electron velocity overshoot effect and its influence on the cut off frequency characteristics of AlGaAs / G...The semiclassical transport equations are used to study the high frequency performance of AlGaAs / GaAs HBTs. Electron velocity overshoot effect and its influence on the cut off frequency characteristics of AlGaAs / GaAs HBTs with different collector design parameters are analyzed and discussed.展开更多
As a non-contact ultra-precision machining method,abrasive water jet polishing(AWJP)has signi-ficant application in optical elements processing due to its stable tool influence function(TIF),no subsurface damage and s...As a non-contact ultra-precision machining method,abrasive water jet polishing(AWJP)has signi-ficant application in optical elements processing due to its stable tool influence function(TIF),no subsurface damage and strong adaptability to workpiece shapes.In this study,the effects of jet pressure,nozzle diameter and impinging angle on the distribution of pressure,velocity and wall shear stress in the polishing flow field were systematically analyzed by computational fluid dynamics(CFD)simulation.Based on the Box-Behnken experimental design,a response surface regression model was constructed to investigate the influence mech-anism of process parameters on material removal rate(MRR)and surface roughness(Ra)of fused silica.And experimental results showed that increasing jet pressure and nozzle diameter significantly improved MRR,consistent with shear stress distribution revealed by CFD simulations.However,increasing jet pressure and impinging angle caused higher Ra values,which was unfavorable for surface quality improvement.Genetic algorithm(GA)was used for multi-objective optimization to establish Pareto solutions,achieving concurrent optimization of polishing efficiency and surface quality.A parameter combination of 2 MPa jet pressure,0.3 mm nozzle diameter,and 30°impinging angle achieved MRR of 169.05μm^(3)/s and Ra of 0.50 nm.Exper-imental verification showed prediction errors of 4.4%(MRR)and 3.8%(Ra),confirming the model’s reliabil-ity.This parameter optimization system provides theoretical basis and technical support for ultra-precision polishing of complex curved optical components.展开更多
[Objective]The channel straightening project of the Pinglu Canal has fragmented the river course,compromising the integrity of original river course and causing ecosystem patchiness.Understanding the current status of...[Objective]The channel straightening project of the Pinglu Canal has fragmented the river course,compromising the integrity of original river course and causing ecosystem patchiness.Understanding the current status of fish resources and the characteristics of their diversity is crucial for the ecological management of the Pinglu Canal.[Methods]During the spring and autumn in 2021 and 2022,a survey of fish resources and species diversity in the Pinglu Canal was conducted using multi-mesh gill nets.A total of 125 fish species were collected,belonging to 10 orders,34 families,and 89 genera.[Results]The result showed that the Pinglu Canal contained three nationally protected Class II species,two endemic species of the Qinjiang River,three anadromous/migratory species,and eight invasive species,accounting for 2.4%,1.6%,2.4%,and 6.4%of the total species,respectively.The fish community primarily consisted of mid-and bottom-dwelling,adhesive-egg-laying,and omnivorous species.The Shannon-Wiener,Simpson,Margalef,and Pielou indices of the fish community in the Pinglu Canal ranged from 2.347 to 2.757,0.081 to 0.151,3.493 to 4.382,and 0.812 to 0.892,respectively.These indices showed relatively uniform distribution across different river reaches.[Conclusion]The result indicate that the fish community structure in the Pinglu Canal is relatively uniform.The reach from the Yujiang River to the Shaping River shows higher stability,while other river reaches experience moderate or severe disturbances.This study provides supplementary baseline data on the fish community structure in the Pinglu Canal and explores the potential impact of inter-basin connectivity on fish resources,aiming to provide a scientific basis for habitat restoration assessments after the channel straightening project.展开更多
Due to the presence of nitro groups, the dust generated during the production and utilization of energetic materials may potentially lead to dust explosion even under low-oxygen or anaerobic conditions.Considering the...Due to the presence of nitro groups, the dust generated during the production and utilization of energetic materials may potentially lead to dust explosion even under low-oxygen or anaerobic conditions.Considering the high energy density of energetic materials, dust explosion can cause serious production safety accidents. Therefore, it is necessary to understand the dust explosion characteristics of energetic materials and the mechanism of dust explosion. According to the literature review, among various influencing factors, the physical and chemical properties of dust are the decisive factors affecting the explosion characteristics of dust. In addition to experimental studies, numerical simulation is another important tool. However, it is subjected to certain limitations. Moreover, it is essential but challenging to fully understand the underlying mechanism. In addition, given the safety hazards posed by dust explosion, explosion suppression has attracted extensive attention for research. Depending on the medium used, there are different forms of suppression, including powder explosion suppression, water spray explosion suppression, inert gas explosion suppression, porous material explosion suppression, and vacuum chamber explosion suppression. As for the selection of explosion suppression agent, consideration must be given to the characteristics of the material. Furthermore, the above research has laid a foundation for discussing the future progress in studying dust explosion of energetic materials, with nano dust and the constraints of existing technology as the focal point.展开更多
Copper-nickel alloys can suffer severe localized corrosion in marine environments containing sulfate-reducing bacteria(SRB),but the effect of SRB on the under-deposit corrosion of copper-nickel alloys is unknown.In th...Copper-nickel alloys can suffer severe localized corrosion in marine environments containing sulfate-reducing bacteria(SRB),but the effect of SRB on the under-deposit corrosion of copper-nickel alloys is unknown.In this work,the corrosion behavior of B10 copper-nickel alloy beneath a deposit caused by SRB with carbon source starvation in artificial seawater was studied based on electrochemical measurements and surface analysis.Results demonstrate that SRB with an organic carbon starvation can survive in artificial water but most SRB cells have died.The survived SRB cells can attach to the bare and deposit-covered B10 copper-nickel alloy,leading to the corrosion acceleration.Due to the limitation of organic carbon source,the pitting corrosion of B10 copper-nickel alloy caused by SRB is not serious.However,serious pitting corrosion of the deposit-covered B10 copper-nickel alloy can be found both in abiotic and biotic conditions,and the pitting corrosion and uniform corrosion are further accelerated by SRB.There is a galvanic effect between the bare and deposit-covered specimens in the presence of SRB in the early stage but the galvanic effect after 5 d of testing can be neglected due to the low OCP difference values.展开更多
Sulfate and nitrate reducing bacteria are important culprits for microbiologically influenced corrosion(MIC)using sulfate and nitrate as electron acceptors,respectively.Sulfate and nitrate hold different standard elec...Sulfate and nitrate reducing bacteria are important culprits for microbiologically influenced corrosion(MIC)using sulfate and nitrate as electron acceptors,respectively.Sulfate and nitrate hold different standard electrode potentials,which may lead to differences in corrosion,but their effects on corrosion by the same bacteria have not been reported.The corrosion of Q235 steel affected by Pseudodesulfovibrio cashew(P.cashew)in the sulfate and nitrate media under carbon starvation was studied.It was found that sulfate and nitrate did not lead to differences in corrosion under abiotic conditions.However,P.cashew promoted corrosion in both cases,and the consumption of H_(2)was the main mechanism for MIC.In addition,corrosion was more severe in the sulfate media.The higher corrosivity of P.cashew with sulfate as the electron acceptor is closely related to the higher number of sessile cells in the biofilm,higher bacterial motility,more hydrogen production pathways,and the increased gene expression of enzymes related to energy synthesis.展开更多
Corrosion caused by sulfate-reducing prokaryotes(SRP)is an important cause of magnesium alloy anode failure in oil pipeline.In this study,the effects of Desulfovibrio sp.HQM3 on the corrosion behavior of AZ31B magnesi...Corrosion caused by sulfate-reducing prokaryotes(SRP)is an important cause of magnesium alloy anode failure in oil pipeline.In this study,the effects of Desulfovibrio sp.HQM3 on the corrosion behavior of AZ31B magnesium alloy anode in organic carbon sources with different contents in simulated tidal flat environment were analyzed using weight loss test,surface analysis and electrochemical analysis technologies.The results showed that the weight loss rate of coupons in low carbon sources contents(0%,1%,10%)was higher than that in 100%carbon sources.Electrochemical analyses showed that the corrosion current density(J_(corr))under low carbon sources contents was larger,while the charge transfer resistance(R_(ct))was lower,leading to a higher corrosion rate compared to those under 100%carbon sources content.Observations from scanning electron microscopy(SEM)and confocal laser scanning microscopy(CLSM)revealed more severe pitting corrosion on the alloy surface in the absence of carbon sources.In addition,a large number of nanowires were observed between bacteria on the alloy surface using SEM.Combined with thermodynamic calculations,it was demonstrated that the corrosion of coupons by Desulfovibrio sp.HQM3 in the absence of carbon sources was achieved through extracellular electron transfer.展开更多
文摘[Objective]The construction of weirs changes the hydraulic characteristics of rivers and affects the structure of phytoplankton communities and the health of aquatic ecosystems in the river.This study aims to explore the nonlinear response relationship between phytoplankton community structure and its driving factors in spring and autumn in Furong Creek under the construction of cascade weirs.[Methods]The structure of phytoplankton communities and related environmental factors were investigated in Furong Creek from 2023 to 2024.This study focused on the analysis of the changes of nutrient concentrations and biomass of phytoplankton in autumn and spring within the same dry season in Furong Creek.Redundancy analysis was used to identify the key factors influencing the structure of phytoplankton communities.The MIKE 11 model was employed to simulate the hydrodynamic changes in the river.Combined with total nitrogen and permanganate index,a GAM model of phytoplankton diversity index and hydrodynamic factors was developed,and the change of phytoplankton diversity after the optimized layout of the cascade weirs was fitted.[Results]The result showed that the annual average value of Shannon-Wiener diversity index of phytoplankton in Furong Creek was 2.79,which was in a state of mild pollution.A total of 239 species from 95 genera in 8 phyla were identified.Among the phytoplankton,Chlorophyta was the dominant group throughout the year in Furong Creek,followed by Bacillariophyta and Cyanophyta.The cell abundance of phytoplankton ranged from 3.11 to 20.64 mg/L and from 0.23 to 6.31 mg/L in spring and autumn,which indicated a clear seasonal succession of phytoplankton community structure.Compared with autumn,the relative abundance of Cyanophyta significantly decreased in spring across the whole river section,while Chrysophyta and Dinophyta showed significant increase at some monitoring sites,leading to water bloom phenomenon and a noticeable decline in the diversity of phytoplankton.The dominant species in the water bodies throughout the year were Cyclotella catenata,Chlorella vulgaris,Scenedesmus bijuga,Scenedesmus quadricauda,Chroomonas acuta,Cryptomonas ovata,and Cryptomonas erosa.Redundancy analysis(RDA)showed that hydrodynamic factors(v,h)and water environmental factors(TN,COD_(Mn))were the main influencing factors of phytoplankton community structure.[Conclusion]The result show that the nutrient concentration,phytoplankton biomass,and density in Furong Creek in spring are significantly higher than in autumn.The GAM model,constructed by combining hydrodynamic and environmental factors,can effectively reflect the nonlinear relationship between phytoplankton diversity index and its driving factors.In spring,with an increase in nutrient concentration,the habitat conditions of low flow speed and high water depths formed by overflow weirs will lead to a decrease in the Shannon-Wiener index of phytoplankton and an intensified risk of eutrophication.However,a reasonable layout scheme of cascade weirs will improve the diversity of phytoplankton and reduce the risk of eutrophication in the river.The findings of this study can help deepen the understanding of the ecological and environmental effects of cascade weir construction in the river.
基金supported by the Natural Science Foundation Research Plan of Shanxi Province (2023JCQN0728)。
文摘The subversive nature of information war lies not only in the information itself, but also in the circulation and application of information. It has always been a challenge to quantitatively analyze the function and effect of information flow through command, control, communications, computer, kill, intelligence,surveillance, reconnaissance (C4KISR) system. In this work, we propose a framework of force of information influence and the methods for calculating the force of information influence between C4KISR nodes of sensing, intelligence processing,decision making and fire attack. Specifically, the basic concept of force of information influence between nodes in C4KISR system is formally proposed and its mathematical definition is provided. Then, based on the information entropy theory, the model of force of information influence between C4KISR system nodes is constructed. Finally, the simulation experiments have been performed under an air defense and attack scenario. The experimental results show that, with the proposed force of information influence framework, we can effectively evaluate the contribution of information circulation through different C4KISR system nodes to the corresponding tasks. Our framework of force of information influence can also serve as an effective tool for the design and dynamic reconfiguration of C4KISR system architecture.
基金Project(50925829) supported by the National Science Fund for Distinguished Young Scholars of ChinaProject(50908148) supported by the National Natural Science Foundation of ChinaProjects(2009-K4-23,2010-11-33) supported by the Research of Ministry of Housing and Urban Rural Development of China
文摘The coupling model of major influence factors such state affecting the chloride diffusion process in concrete is as environmental relative humidity, load-induced crack and stress discussed. The probability distributions of the critical chloride concentration Cc, the chloride diffusion coefficient D, and the surface chloride concentration Cs were determined based on the collected natural exposure data. And the estimation of probability of corrosion initiation considering the coupling effects of influence factors is presented. It is found that the relative humidity and curing time are the most effective factors affecting the probability of corrosion initiation before and after 10 years of exposure time. At the same exposure time, the influence of load-induced crack and stress state on the probability of corrosion initiation is obvious, in which the effect of crack is the most one
基金Projects(51478049,51778068)supported by the National Natural Science Foundation of ChinaProject(14JJ2075,2019JJ40301)supported by the Hunan Natural Science Foundation of China+1 种基金Project(17A010)supported by the Scientific Research Fund of Hunan Provincial Education Department of ChinaProject(2017GK4034)supported by the Major Technological Achievements Transformation Program of Hunan Strategic Emerging Industries of China
文摘Cantilever casting concrete arch bridge using form traveller has a broad application prospect.However,it is difficult to obtain reasonable initial cable force in construction stage.In this study,stress balance and influence matrix methods were developed to determine the initial cable force of cantilever casting concrete arch bridge.The stress balance equation and influence matrix of arch rib critical section were established,and the buckle cable force range was determined by the allowable stress of arch rib critical section.Then a group of buckle cable forces were selected and substituted into the stress balance equation,and the reasonable initial buckle cable force was determined through iteration.Based on the principle of force balance,the initial anchor cable force was determined.In an engineering application example,it is shown that the stress balance and influence matrix methods for the determination of initial cable force are feasible and reliable.The initial cable forces of arch rib segments only need to be adjusted once in the corresponding construction process,which improves the working efficiency and reduces the construction risk.It is found that the methods have great advantages for determining initial cable force in cantilever casting construction process of concrete arch bridge.
文摘A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision process, and contains a point-mass model for the dynamics of an aircraft and takes into account the decision maker＇s preferences under uncertain conditions. Considering an active opponent, the opponent＇s maneuvers can be modeled stochastically. The solution of multistage influence diagram can be obtained by converting the multistage influence diagram into a two-level optimization problem. The simulation results show the model is effective.
基金Project(2011AA061001)supported by the National High Technology Research and Development Program of ChinaProject(51304251)supported by the National Natural Science Foundation of China+1 种基金Project(2013M542141)supported by China Postdoctoral FoundationProject(K1201010-61)supported by Planned Program of Science and Technology of Changsha,China
文摘A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arsenic in selected samples were evaluated. Arsenic contents in all input and output samples vary from 0.11% in raw lead to 6.66% in collected dust-2. More arsenic is volatilized in blast furnace and fuming furnace(73.02% of arsenic input) than bottom blowing furnace(10.29% of arsenic input).There are 78.97%, 13.69%, 7.31% of total arsenic distributed in intermediate materials, stockpiled materials and unorganized emissions, respectively. Matte slag-2, collected dust-1 and secondary zinc oxide are hazardous based on the arsenic concentrations of toxicity characteristic leaching procedure. According to risk assessment code(RAC) guideline, arsenic in collected dust-1 poses a very serious risk to the surrounding environment, arsenic in speiss, matte slag-2, water-quenched slag and secondary zinc oxide show low risk, while arsenic in matte slag-1, collected dust-2 and post dust has no risk to the environment.
文摘In this article, authors introduce a method to assess local influence of obser- vations on the parameter estimates and prediction in multivariate regression model. The diagnostics under the perturbations of error variance, response variables and explanatory variables are derived, and the results are compared with those of case- deletion. Two examples are analyzed for illustration.
基金supported by the National Natural Science Foundation of China(71571189)
文摘System of systems architecture（SoSA） has received increasing emphasis by scholars since Zachman ignited its flame in 1987. Given its complexity and abstractness, it is critical to validate and evaluate SoSA to ensure requirements have been met.Multiple qualities are discussed in the literature of SoSA evaluation, while research on functionality is scarce. In order to assess SoSA functionality, an extended influence diagram（EID） is developed in this paper. Meanwhile, a simulation method is proposed to elicit the conditional probabilities in EID through designing and executing SoSA. An illustrative anti-missile architecture case is introduced for EID development, architecture design, and simulation.
基金The project was supported by the Fund for Scientific Research in Flanders (FWO-Vlaanderen) for Research Grant G021115N.
文摘In this work it is shown that the kinetic energy and the exchange-correlation energy are mutual dependent on each other.This aspect is first derived in an orbital-free context.It is shown that the total Fermi potential depends on the density only,the individual parts,the Pauli kinetic energy and the exchange-correlation energy,however,are orbital dependent and as such mutually influence each other.The numerical investigation is performed for the orbital-based non-interacting Kohn-Sham system in order to avoid additional effects due to further approximations of the kinetic energy.The numerical influence of the exchange-correlation functional on the non-interacting kinetic energy is shown to be of the orderof a few Hartrees.For chemical purposes,however,the energetic performance as a function of the nuclear coordinates is much more important than total energies.Therefore,the effect on the bond dissociation curve was studied exemplarily for the carbon monoxide.The data reveals that,the mutual influence between the exchange-correlation functional and the kinetic energy has a significant influence on bond dissociation energies and bond distances.Therefore,the effect of the exchange-correlation treatment must be considered in the design of orbital-free density functional approximations for the kinetic energy.
文摘The heavy metals in the atmosphere mainly come from the gas and dust which involved by the energy costs,transport,metallurgy and building materials production.Other than the element of Hg,the heavy metals come into the atmosphere in the form of aerosol basically and go into the soil through
基金supported by the project,research on Teaching Reforms of College EPS Courses Based on MOOCs(Project Number:NIT2017JY-154)
文摘“The Belt and Road”(abb.B & R) Initiative reflects the essence of Chinese traditional culture -“harmony is precious”.Although the countries along B&R share the cultural legacy of the ancient silk roads,the economic development,ethnic characteristics and religious beliefs of the countries today vary dramatically.Since the beginning of the new century,China has carried out the strategy of “Going Global” in culture,striving to enhance the radiating power of Chinese culture in the world and the power of influence at the international level.Starting from exploring resources of publicity from B&R areas,developing counterpart cultural products,expanding channels of communication,improving service facilities and other strategies,the country has developed and improved channels for cultural communication and is striving to establish a new system of all-round,multi-level and effective communication.Meanwhile,under the support of international cultural organizations and institutions,by making good use of international platforms,the country hopes to explore new development concepts and models of Chinese culture,and to promote cultural identity between different regions,to enhance the international influence of national culture through its active participation in national cultural activities and active identification to the junction point.
基金Project(20050216007) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘According to the concept of virtual bending force,a rational explanation for SHOHET's model was presented. Considering the deformation characters of the work rolls in four-high mill,the deformation model of the work roll was regarded as a cantilever beam and new influence coefficients were deduced.The effect of the bending force was taken into account independently. Therefore,the contribution to work roll deflection caused by rolling load,rolling pressure between rolls and bending force can be got from the new formulas.To validate the accuracy of the formulas,the results obtained from the new formulas were compared with those from SHOHET's formulas.It is found that they highly coincide,which illustrates that the formulas are reliable.
文摘The semiclassical transport equations are used to study the high frequency performance of AlGaAs / GaAs HBTs. Electron velocity overshoot effect and its influence on the cut off frequency characteristics of AlGaAs / GaAs HBTs with different collector design parameters are analyzed and discussed.
文摘As a non-contact ultra-precision machining method,abrasive water jet polishing(AWJP)has signi-ficant application in optical elements processing due to its stable tool influence function(TIF),no subsurface damage and strong adaptability to workpiece shapes.In this study,the effects of jet pressure,nozzle diameter and impinging angle on the distribution of pressure,velocity and wall shear stress in the polishing flow field were systematically analyzed by computational fluid dynamics(CFD)simulation.Based on the Box-Behnken experimental design,a response surface regression model was constructed to investigate the influence mech-anism of process parameters on material removal rate(MRR)and surface roughness(Ra)of fused silica.And experimental results showed that increasing jet pressure and nozzle diameter significantly improved MRR,consistent with shear stress distribution revealed by CFD simulations.However,increasing jet pressure and impinging angle caused higher Ra values,which was unfavorable for surface quality improvement.Genetic algorithm(GA)was used for multi-objective optimization to establish Pareto solutions,achieving concurrent optimization of polishing efficiency and surface quality.A parameter combination of 2 MPa jet pressure,0.3 mm nozzle diameter,and 30°impinging angle achieved MRR of 169.05μm^(3)/s and Ra of 0.50 nm.Exper-imental verification showed prediction errors of 4.4%(MRR)and 3.8%(Ra),confirming the model’s reliabil-ity.This parameter optimization system provides theoretical basis and technical support for ultra-precision polishing of complex curved optical components.
文摘[Objective]The channel straightening project of the Pinglu Canal has fragmented the river course,compromising the integrity of original river course and causing ecosystem patchiness.Understanding the current status of fish resources and the characteristics of their diversity is crucial for the ecological management of the Pinglu Canal.[Methods]During the spring and autumn in 2021 and 2022,a survey of fish resources and species diversity in the Pinglu Canal was conducted using multi-mesh gill nets.A total of 125 fish species were collected,belonging to 10 orders,34 families,and 89 genera.[Results]The result showed that the Pinglu Canal contained three nationally protected Class II species,two endemic species of the Qinjiang River,three anadromous/migratory species,and eight invasive species,accounting for 2.4%,1.6%,2.4%,and 6.4%of the total species,respectively.The fish community primarily consisted of mid-and bottom-dwelling,adhesive-egg-laying,and omnivorous species.The Shannon-Wiener,Simpson,Margalef,and Pielou indices of the fish community in the Pinglu Canal ranged from 2.347 to 2.757,0.081 to 0.151,3.493 to 4.382,and 0.812 to 0.892,respectively.These indices showed relatively uniform distribution across different river reaches.[Conclusion]The result indicate that the fish community structure in the Pinglu Canal is relatively uniform.The reach from the Yujiang River to the Shaping River shows higher stability,while other river reaches experience moderate or severe disturbances.This study provides supplementary baseline data on the fish community structure in the Pinglu Canal and explores the potential impact of inter-basin connectivity on fish resources,aiming to provide a scientific basis for habitat restoration assessments after the channel straightening project.
基金the financial support of the Shanxi Fire & Explosion-Proofing Safety Engineering and Technology Research Center, North University of China。
文摘Due to the presence of nitro groups, the dust generated during the production and utilization of energetic materials may potentially lead to dust explosion even under low-oxygen or anaerobic conditions.Considering the high energy density of energetic materials, dust explosion can cause serious production safety accidents. Therefore, it is necessary to understand the dust explosion characteristics of energetic materials and the mechanism of dust explosion. According to the literature review, among various influencing factors, the physical and chemical properties of dust are the decisive factors affecting the explosion characteristics of dust. In addition to experimental studies, numerical simulation is another important tool. However, it is subjected to certain limitations. Moreover, it is essential but challenging to fully understand the underlying mechanism. In addition, given the safety hazards posed by dust explosion, explosion suppression has attracted extensive attention for research. Depending on the medium used, there are different forms of suppression, including powder explosion suppression, water spray explosion suppression, inert gas explosion suppression, porous material explosion suppression, and vacuum chamber explosion suppression. As for the selection of explosion suppression agent, consideration must be given to the characteristics of the material. Furthermore, the above research has laid a foundation for discussing the future progress in studying dust explosion of energetic materials, with nano dust and the constraints of existing technology as the focal point.
基金Project(2023A1515012146)supported by the Guangdong Basic and Applied Research Foundation,ChinaProjects(52271083,51901253,52371059,52071091)supported by the National Natural Science Foundation of ChinaProject(2023HA-TYUTKFYF029)supported by the Open Research Fund from the Hai’an&Taiyuan University of Technology Advanced Manufacturing and Intelligent Equipment Industrial Research Institute,China。
文摘Copper-nickel alloys can suffer severe localized corrosion in marine environments containing sulfate-reducing bacteria(SRB),but the effect of SRB on the under-deposit corrosion of copper-nickel alloys is unknown.In this work,the corrosion behavior of B10 copper-nickel alloy beneath a deposit caused by SRB with carbon source starvation in artificial seawater was studied based on electrochemical measurements and surface analysis.Results demonstrate that SRB with an organic carbon starvation can survive in artificial water but most SRB cells have died.The survived SRB cells can attach to the bare and deposit-covered B10 copper-nickel alloy,leading to the corrosion acceleration.Due to the limitation of organic carbon source,the pitting corrosion of B10 copper-nickel alloy caused by SRB is not serious.However,serious pitting corrosion of the deposit-covered B10 copper-nickel alloy can be found both in abiotic and biotic conditions,and the pitting corrosion and uniform corrosion are further accelerated by SRB.There is a galvanic effect between the bare and deposit-covered specimens in the presence of SRB in the early stage but the galvanic effect after 5 d of testing can be neglected due to the low OCP difference values.
基金Project(2022LSL050102)supported by the Laoshan Laboratory,China。
文摘Sulfate and nitrate reducing bacteria are important culprits for microbiologically influenced corrosion(MIC)using sulfate and nitrate as electron acceptors,respectively.Sulfate and nitrate hold different standard electrode potentials,which may lead to differences in corrosion,but their effects on corrosion by the same bacteria have not been reported.The corrosion of Q235 steel affected by Pseudodesulfovibrio cashew(P.cashew)in the sulfate and nitrate media under carbon starvation was studied.It was found that sulfate and nitrate did not lead to differences in corrosion under abiotic conditions.However,P.cashew promoted corrosion in both cases,and the consumption of H_(2)was the main mechanism for MIC.In addition,corrosion was more severe in the sulfate media.The higher corrosivity of P.cashew with sulfate as the electron acceptor is closely related to the higher number of sessile cells in the biofilm,higher bacterial motility,more hydrogen production pathways,and the increased gene expression of enzymes related to energy synthesis.
基金Project(42076043) supported by the National Natural Science Foundation of ChinaProject(ZR2023ZD31) supported by the Major Basic Research Project of Natural Science Foundation of Shandong Province,ChinaProject(2023VEA0007) supported by the Chinese Academy of Sciences President’s International Fellowship Initiative。
文摘Corrosion caused by sulfate-reducing prokaryotes(SRP)is an important cause of magnesium alloy anode failure in oil pipeline.In this study,the effects of Desulfovibrio sp.HQM3 on the corrosion behavior of AZ31B magnesium alloy anode in organic carbon sources with different contents in simulated tidal flat environment were analyzed using weight loss test,surface analysis and electrochemical analysis technologies.The results showed that the weight loss rate of coupons in low carbon sources contents(0%,1%,10%)was higher than that in 100%carbon sources.Electrochemical analyses showed that the corrosion current density(J_(corr))under low carbon sources contents was larger,while the charge transfer resistance(R_(ct))was lower,leading to a higher corrosion rate compared to those under 100%carbon sources content.Observations from scanning electron microscopy(SEM)and confocal laser scanning microscopy(CLSM)revealed more severe pitting corrosion on the alloy surface in the absence of carbon sources.In addition,a large number of nanowires were observed between bacteria on the alloy surface using SEM.Combined with thermodynamic calculations,it was demonstrated that the corrosion of coupons by Desulfovibrio sp.HQM3 in the absence of carbon sources was achieved through extracellular electron transfer.
