期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
浸渍型甲醇裂解Cu/Cr基催化剂 被引量:8
1
作者 宋卫林 蒋毅 +3 位作者 程极源 肖颖 王华明 陈君和 《应用化学》 CAS CSCD 北大核心 2001年第11期918-920,共3页
The Cu/Cr base catalysts were prepared by impregnation. XRD and TPR technology were applied to characterize the catalysts. The result showed that the Cu/Cr base catalysts performed much better than the conventional Cu... The Cu/Cr base catalysts were prepared by impregnation. XRD and TPR technology were applied to characterize the catalysts. The result showed that the Cu/Cr base catalysts performed much better than the conventional Cu/Zn/Al catalysts. The stability of the catalysts was enhanced by promoters such as K, Mg, Ni, Y. But the promoters reduced the initial activity of the catalysts. The promoters except Y improved the selectivity apparently. 展开更多
关键词 浸渍 甲醇 裂解 cu/cr基催化剂 氢气 制备 清洁燃料 铜/铬基催化剂 催化活性
在线阅读 下载PDF
Cr助剂对甲醇水蒸气重整制氢铜系催化剂性能影响的研究
2
作者 赵宁 尹燕华 +1 位作者 王新喜 牛成德 《舰船科学技术》 2010年第1期106-109,共4页
通过正交试验初步确定催化剂的制备工艺,结合单因素实验对催化剂的组成进行了深入考察。在H2O/CH3OH摩尔比为1.3、液空速为1.5 h-1、反应温度为220℃和250℃的条件下,考察了铬助剂对催化剂性能的影响。结果表明,Cu/Cr质量比为1∶1时催... 通过正交试验初步确定催化剂的制备工艺,结合单因素实验对催化剂的组成进行了深入考察。在H2O/CH3OH摩尔比为1.3、液空速为1.5 h-1、反应温度为220℃和250℃的条件下,考察了铬助剂对催化剂性能的影响。结果表明,Cu/Cr质量比为1∶1时催化效果最佳,出口气体中CO的含量降低了50%,甲醇的转化率提高了20%。 展开更多
关键词 甲醇 水蒸气重整 氢气 铜基催化剂 cr助剂
在线阅读 下载PDF
MgO改性CuZnAl催化剂上甲醇裂解制氢 被引量:10
3
作者 周性东 陈晓蓉 梅华 《精细化工》 EI CAS CSCD 北大核心 2016年第5期541-545,共5页
为了提高甲醇裂解制氢的气体收率,减少液相副产物的生成量,采用共沉淀法制备MgO改性CuZnAl催化剂,通过BET、XRD、SEM、H_2-TPR、CO2-TPD对催化剂结构和物化性能进行表征分析,固定床中考察MgO改性CuZnAl催化剂对甲醇裂解制氢催化性能。... 为了提高甲醇裂解制氢的气体收率,减少液相副产物的生成量,采用共沉淀法制备MgO改性CuZnAl催化剂,通过BET、XRD、SEM、H_2-TPR、CO2-TPD对催化剂结构和物化性能进行表征分析,固定床中考察MgO改性CuZnAl催化剂对甲醇裂解制氢催化性能。结果表明,引入适量的MgO可提高催化剂比表面积和CuO的分散度,改善催化剂氧化还原性,提高催化剂活性和选择性。得到优化的催化剂CuZnAlMg_2,其组分质量比为m(CuO)∶m(ZnO)∶m(Al_2O_3)∶m(MgO)=16∶13∶3∶2。在反应温度280℃、反应压力1.0MPa和空速0.6h-1条件下,CuZnAlMg_2催化剂上甲醇裂解转化率为99.1%,气体收率为97.0%。对液相产物进行分析表明,加入适量MgO提高催化剂碱性,能有效抑制液相副产物生成,提高气体收率。 展开更多
关键词 氧化镁 铜基催化剂 甲醇裂解 制氢 改性 催化与分离提纯技术
在线阅读 下载PDF
促进型甲酸甲酯氢解制甲醇铜基催化剂的研究 被引量:5
4
作者 李海燕 张鸿斌 +2 位作者 林国栋 杨意泉 蔡启瑞 《厦门大学学报(自然科学版)》 CAS CSCD 北大核心 1997年第3期381-387,共7页
研制开发了一种耐CO低温高效四组分(Cu-Cr-Mn-Ni)改进铜铬催化剂,其原料合成气中CO允许含量可高达13V%;在常压,413K,原料气H2/MF=4/1(v/v),流速为1800mL/hgcatal.的反应条... 研制开发了一种耐CO低温高效四组分(Cu-Cr-Mn-Ni)改进铜铬催化剂,其原料合成气中CO允许含量可高达13V%;在常压,413K,原料气H2/MF=4/1(v/v),流速为1800mL/hgcatal.的反应条件下,MF转化率高达99.8%,甲醇选择性为99.9%(在相同反应条件下二组分的Cu-Cr催化剂上MF转化率仅为73.1%,甲醇选择性为98.0%),当向原料气中添加13.1V%CO时,MF转化率仍可以稳定达到95.9%,甲醇选择性为96.3%.实验结果表明,CO导致催化剂失活的重要原因之一是CO导致Cu+深度还原为Cu0。 展开更多
关键词 甲酸甲酯氢解 促进型 催化剂 铜铬催化剂
在线阅读 下载PDF
溶胶凝胶法制备甲醇裂解铜系催化剂 被引量:7
5
作者 徐士伟 储伟 戴晓雁 《化学研究与应用》 CAS CSCD 北大核心 2005年第1期110-111,114,共3页
The copper-based catalysts were prepared by sol-gel method and characterized by TPR and TG,and the catalysts were also examined in the reaction of methanol decomposition to hydrogen and carbon monoxide.It was showed t... The copper-based catalysts were prepared by sol-gel method and characterized by TPR and TG,and the catalysts were also examined in the reaction of methanol decomposition to hydrogen and carbon monoxide.It was showed that the size of Cu particles on the catalysts prepared by sol-gel method was smaller that than on the one prepared by impregnation method.In the reaction of methanol decomposition,the conversion increased with the rise of temperature.The catalysts with Cr promoter had better activity and higher yield of H2 at lower temperature,but at higher temperature,the catalysts with La or Ce were better. 展开更多
关键词 溶胶凝胶法 铜系催化剂 甲醇制氢 助剂TPR表征
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部