The flexibility of traditional image processing system is limited because those system are designed for specific applications. In this paper, a new TMS320C64x-based multi-DSP parallel computing architecture is present...The flexibility of traditional image processing system is limited because those system are designed for specific applications. In this paper, a new TMS320C64x-based multi-DSP parallel computing architecture is presented. It has many promising characteristics such as powerful computing capability, broad I/O bandwidth, topology flexibility, and expansibility. The parallel system performance is evaluated by practical experiment.展开更多
The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the ...The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the geometrical shape and connectivity of pores were analyzed based on image process method, and the three dimensional reconstruction of pore structure images was realized. The results show that the porosity of ore particles bed in leaching column is 42.92%, 41.72%, 39.34% at top, middle and bottom zone, respectively. Obviously it has spatial variability and decreases appreciably along the height of the column. The overall average porosity obtained by image processing is 41.33% while the porosity gotten from general measurement method in laboratory is 42.77% showing the results of both methods are consistent well. The pore structure of ore granular media is characterized as a dynamical space network composed of interconnected pore bodies and pore throats. The ratio of throats with equivalent diameter less than 1.91 mm to the total pores is 29.31%, and that of the large pores with equivalent diameter more than 5.73 mm is 2.90%.展开更多
The concept and advantage of reconfigurable technology is introduced. A kind of processor architecture of re configurable macro processor (RMP) model based on FPGA array and DSP is put forward and has been implemented...The concept and advantage of reconfigurable technology is introduced. A kind of processor architecture of re configurable macro processor (RMP) model based on FPGA array and DSP is put forward and has been implemented. Two image algorithms are developed: template-based automatic target recognition and zone labeling. One is estimating for motion direction in the infrared image background, another is line picking-up algorithm based on image zone labeling and phase grouping technique. It is a kind of 'hardware' function that can be called by the DSP in high-level algorithm. It is also a kind of hardware algorithm of the DSP. The results of experiments show the reconfigurable computing technology based on RMP is an ideal accelerating means to deal with the high-speed image processing tasks. High real time performance is obtained in our two applications on RMP.展开更多
Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gra...Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gray-level and binary images, the linear texture of ship wake in oceanic clutter can be well detected. It has been applied to the automatic detection of a moving ship from the SEASAT SAR image. The results show that this algorithm is well robust in a strong noisy background and is not very sensitive to the threshold parameter and the working window size.展开更多
The measurement of the surface quality and the profile preciseness is major issues in many industrial branches such that the surface quality of semi products directly affects the subsequent production steps.Although,t...The measurement of the surface quality and the profile preciseness is major issues in many industrial branches such that the surface quality of semi products directly affects the subsequent production steps.Although,there are many ways to obtain required data,the hardware necessary for the measurements such as 2D or 3D scanners,depending on the problem’s complexity,is too expensive.Therefore,in this paper,what we put forward as a novelty is an algorithm which is verified on the model of simple 3D scanner on the image processing basis with the resolution of 0.1 mm.There are many ways to scan surface profile;however,the image processing currently is the most trending topic in industry automation.Most importantly,in order to obtain surface images,standard high resolution reflex camera is used and thus the post processing could be realized with MatLab as the software environment.Therefore,this solution is an alternative to the expensive scanners,and single-purpose devices could be extended by many additional functions.展开更多
The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of tal...The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.展开更多
A novel reconfigurable hardware system which uses both muhi-DSP and FPGA to attain high performance and real-time image processing are presented. The system structure and working principle of mainly processing multi-B...A novel reconfigurable hardware system which uses both muhi-DSP and FPGA to attain high performance and real-time image processing are presented. The system structure and working principle of mainly processing multi-BSP board, extended multi-DSP board are analysed. The outstanding advantage is that the communication among different board components of this system is supported by high speed link ports ＆ serial ports for increasing the system performance and computational power. Then the implementation of embedded real-time operating systems （RTOS） by us is discussed in detail. In this system, we adopt two kinds of parallel structures controlled by RTOS for parallel processing of algorithms. The experimental results show that exploitive period of the system is short, and maintenance convenient. Thus it is suitable for real-time image processing and can get satisfactory effect of image recognition.展开更多
A new meso-mechanical testing scheme based on SEM was developed to carry out the experiment of microfracturing process of rocks. The microfracturing process of the pre-crack marble sample on surrounding rock in the im...A new meso-mechanical testing scheme based on SEM was developed to carry out the experiment of microfracturing process of rocks. The microfracturing process of the pre-crack marble sample on surrounding rock in the immerged Long-big tunnel in Jinping Cascade II Hydropower Station under uniaxial compression was recorded by using the testing scheme. According to the stereology theory, the propagation and coalescent of cracks at meso-scale were quantitatively investigated with digital technology. Therefore, the basic geometric information of rock microcracks such as area, angle, length, width, perimeter, was obtained from binary images after segmentation. The failure mechanism of specimen under uniaxial compression with the quantitative information was studied from macro and microscopic point of view. The results show that the image of microfracturing process of the specimen can be observed and recorded digitally. During the damage of the specimen, the distribution of microcracks in the specimen is still subjected to exponential distribution with some microcracks concentrated in certain regions. Finally, the change law of the fractal dimension of the local element in marble sample under different external load conditions is obtained by means of the statistical calculation of the fractal dimension.展开更多
Parallel versions of prestack KirchhofT 3D integral migration algorithm, which is suitable forseismic data processing, are described in this paper. Firstly, the inherent parallel characteristics of seismicdata process...Parallel versions of prestack KirchhofT 3D integral migration algorithm, which is suitable forseismic data processing, are described in this paper. Firstly, the inherent parallel characteristics of seismicdata processing are analyzed. Then some principles in algorithm partition are discussed. Based on these analyses and the system architecture, communication mechanism, this algorithm is divided into four subtasksallocated to four nodes of 990 STAR-l. Then we describe in detail a module-partitioning method-theI / O processing and communication are separated from the computation process, the processes includingI / O processing and communication are allocated to transputer T805 and the other is allocated to processori860. These two processes are synchronized by shared memory and memory-lock mechanism, but the communication betWeen different nodes is implemented through links of transputer. Load balance among fourprocessor modules is performed dynamically. Finally, we discussed the speed--up of the parallel versions ofprestack KirchhofT 3D integral migration algorithm running on four nodes. Some further researches are also melltioned in this paper.展开更多
A new method to detect steel ball's surface flaws is presented based on computer techniques of image processing and pattern recognition. The steel ball's surface flaws is the primary factor causing bearing fai...A new method to detect steel ball's surface flaws is presented based on computer techniques of image processing and pattern recognition. The steel ball's surface flaws is the primary factor causing bearing failure. The high efficient and precision detections for the surface flaws of steel ball can be conducted by the presented method, including spot, abrasion, burn, scratch and crack, etc. The design of main components of the detecting system is described in detail including automatic feeding mechanism, automatic spreading mechanism of steel ball's surface, optical system of microscope, image acquisition system, image processing system. The whole automatic system is controlled by an industrial control computer, which can carry out the recognition of flaws of steel ball's surface effectively.展开更多
The quality of synthetic aperture radar(SAR)image degrades in the case of multiple imaging projection planes(IPPs)and multiple overlapping ship targets,and then the performance of target classification and recognition...The quality of synthetic aperture radar(SAR)image degrades in the case of multiple imaging projection planes(IPPs)and multiple overlapping ship targets,and then the performance of target classification and recognition can be influenced.For addressing this issue,a method for extracting ship targets with overlaps via the expectation maximization(EM)algorithm is pro-posed.First,the scatterers of ship targets are obtained via the target detection technique.Then,the EM algorithm is applied to extract the scatterers of a single ship target with a single IPP.Afterwards,a novel image amplitude estimation approach is pro-posed,with which the radar image of a single target with a sin-gle IPP can be generated.The proposed method can accom-plish IPP selection and targets separation in the image domain,which can improve the image quality and reserve the target information most possibly.Results of simulated and real mea-sured data demonstrate the effectiveness of the proposed method.展开更多
Distributed/parallel-processing system like sun grid engine(SGE) that utilizes multiple nodes/cores is proposed for the faster processing of large sized satellite image data. After verification, distributed process en...Distributed/parallel-processing system like sun grid engine(SGE) that utilizes multiple nodes/cores is proposed for the faster processing of large sized satellite image data. After verification, distributed process environment for pre-processing performance can be improved by up to 560.65% from single processing system. Through this, analysis performance in various fields can be improved, and moreover, near-real time service can be achieved in near future.展开更多
This paper presents partially asynchronous parallel simulation of continuous-system (PAPSoCS) and some approaches to the issues of its implementation on a multicomputer system. To guarantee the simulation results cor...This paper presents partially asynchronous parallel simulation of continuous-system (PAPSoCS) and some approaches to the issues of its implementation on a multicomputer system. To guarantee the simulation results correct and speedup the simulation, the scheme for efficient PAPSoCS is proposed and the virtual topology star is constructed to match the path of message passing for solving algorithm-architecture adequation problem. Under the circumstances that messages frequently passed inter-processor are much shorter, typically within several 4 bytes, asynchronous communication mode is employed to reduce the communication ratio. Experiment results show that asynchronous parallel simulation has much higher efficiency than its synchronous counterpart.展开更多
Current applications,consisting of multiple replicas,are packaged into lightweight containers with their execution dependencies.Considering the dominant impact of distribution efficiency of gigantic images on containe...Current applications,consisting of multiple replicas,are packaged into lightweight containers with their execution dependencies.Considering the dominant impact of distribution efficiency of gigantic images on container startup(e.g.,distributed deep learning application),the image“warm-up”technique which prefetches images of these replicas to destination nodes in the cluster is proposed.However,the current image“warm-up”technique solely focuses on identical image distribution,which fails to take effect when distributing different images to destination nodes.To address this problem,this paper proposes Hound,a simple but efficient cluster image distribution system based on Docker.To support diverse image distribution requests of cluster nodes,Hound additionally adopts node-level parallelism(i.e.,downloading images to destination nodes in parallel)to further improve the efficiency of image distribution.The experimental results demonstrate Hound outperforms Docker,kubernetes container runtime interface(CRI-O),and Docker-compose in terms of image distribution performance when cluster nodes request different images.Moreover,the high scalability of Hound is evaluated in the scenario of ten nodes.展开更多
To meet the challenge of implementing rapidly advanced, time-consuming medical image processing algorithms, it is necessary to develop a medical image processing technology to process a 2D or 3D medical image dynamica...To meet the challenge of implementing rapidly advanced, time-consuming medical image processing algorithms, it is necessary to develop a medical image processing technology to process a 2D or 3D medical image dynamically on the web. But in a premier system, only static image processing can be provided with the limitation of web technology. The development of Java and CORBA (common object request broker architecture) overcomes the shortcoming of the web static application and makes the dynamic processing of medical images on the web available. To develop an open solution of distributed computing, we integrate the Java, and web with the CORBA and present a web-based medical image dynamic processing methed, which adopts Java technology as the language to program application and components of the web and utilies the CORBA architecture to cope with heterogeneous property of a complex distributed system. The method also provides a platform-independent, transparent processing architecture to implement the advanced image routines and enable users to access large dataset and resources according to the requirements of medical applications. The experiment in this paper shows that the medical image dynamic processing method implemented on the web by using Java and the CORBA is feasible.展开更多
ADSP-TS101 is a high performance DSP with good properties of parallel processing and high speed.According to the real-time processing requirements of underwater acoustic communication algorithms,a real-time parallel p...ADSP-TS101 is a high performance DSP with good properties of parallel processing and high speed.According to the real-time processing requirements of underwater acoustic communication algorithms,a real-time parallel processing system with multi-channel synchronous sample,which is composed of multiple ADSP-TS101s,is designed and carried out.For the hardware design,field programmable gate array(FPGA)logical control is adopted for the design of multi-channel synchronous sample module and cluster/data flow associated pin connection mode is adopted for multiprocessing parallel processing configuration respectively.And the software is optimized by two kinds of communication ways:broadcast writing way through shared bus and point-to-point way through link ports.Through the whole system installation,connective debugging,and experiments in a lake,the results show that the real-time parallel processing system has good stability and real-time processing capability and meets the technical design requirements of real-time processing.展开更多
基金This project was supported by the National Natural Science Foundation of China (60135020).
文摘The flexibility of traditional image processing system is limited because those system are designed for specific applications. In this paper, a new TMS320C64x-based multi-DSP parallel computing architecture is presented. It has many promising characteristics such as powerful computing capability, broad I/O bandwidth, topology flexibility, and expansibility. The parallel system performance is evaluated by practical experiment.
基金Project(2004CB619205) supported by the National Key Fundamental Research and Development Program of ChinaProject(50325415) supported by the National Science Fund for Distinguished Young ScholarsProject(50574099) supported by the National Natural Science Foundation of China
文摘The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the geometrical shape and connectivity of pores were analyzed based on image process method, and the three dimensional reconstruction of pore structure images was realized. The results show that the porosity of ore particles bed in leaching column is 42.92%, 41.72%, 39.34% at top, middle and bottom zone, respectively. Obviously it has spatial variability and decreases appreciably along the height of the column. The overall average porosity obtained by image processing is 41.33% while the porosity gotten from general measurement method in laboratory is 42.77% showing the results of both methods are consistent well. The pore structure of ore granular media is characterized as a dynamical space network composed of interconnected pore bodies and pore throats. The ratio of throats with equivalent diameter less than 1.91 mm to the total pores is 29.31%, and that of the large pores with equivalent diameter more than 5.73 mm is 2.90%.
文摘The concept and advantage of reconfigurable technology is introduced. A kind of processor architecture of re configurable macro processor (RMP) model based on FPGA array and DSP is put forward and has been implemented. Two image algorithms are developed: template-based automatic target recognition and zone labeling. One is estimating for motion direction in the infrared image background, another is line picking-up algorithm based on image zone labeling and phase grouping technique. It is a kind of 'hardware' function that can be called by the DSP in high-level algorithm. It is also a kind of hardware algorithm of the DSP. The results of experiments show the reconfigurable computing technology based on RMP is an ideal accelerating means to deal with the high-speed image processing tasks. High real time performance is obtained in our two applications on RMP.
基金This project was supported by the National Natural Science Foundation of China (No. 49831060).
文摘Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gray-level and binary images, the linear texture of ship wake in oceanic clutter can be well detected. It has been applied to the automatic detection of a moving ship from the SEASAT SAR image. The results show that this algorithm is well robust in a strong noisy background and is not very sensitive to the threshold parameter and the working window size.
基金Project(2102–2020)supported by the SPEV Project,University of Hradec Kralove,FIM,Czech RepublicProject(Vot-20H04)supported by Universiti Teknologi Malaysia(UTM)+1 种基金Project(Vot 4L876)supported by Malaysia Research University Network(MRUN)Project(Vot 5F073)supported by the Fundamental Research Grant Scheme(FRGS),Ministry of Education Malaysia。
文摘The measurement of the surface quality and the profile preciseness is major issues in many industrial branches such that the surface quality of semi products directly affects the subsequent production steps.Although,there are many ways to obtain required data,the hardware necessary for the measurements such as 2D or 3D scanners,depending on the problem’s complexity,is too expensive.Therefore,in this paper,what we put forward as a novelty is an algorithm which is verified on the model of simple 3D scanner on the image processing basis with the resolution of 0.1 mm.There are many ways to scan surface profile;however,the image processing currently is the most trending topic in industry automation.Most importantly,in order to obtain surface images,standard high resolution reflex camera is used and thus the post processing could be realized with MatLab as the software environment.Therefore,this solution is an alternative to the expensive scanners,and single-purpose devices could be extended by many additional functions.
基金Project(2013BAB06B00) supported by the National Key Technology R&D Programof ChinaProject(2011CB013504) supported by the National Basic Research Program of ChinaProject(50911130366) supported by the National Natural Science Foundation of China
文摘The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.
基金This project was supported by the National Natural Science Foundation of China(60135020) National Key Pre-researchProject of China(413010701 -3) .
文摘A novel reconfigurable hardware system which uses both muhi-DSP and FPGA to attain high performance and real-time image processing are presented. The system structure and working principle of mainly processing multi-BSP board, extended multi-DSP board are analysed. The outstanding advantage is that the communication among different board components of this system is supported by high speed link ports ＆ serial ports for increasing the system performance and computational power. Then the implementation of embedded real-time operating systems （RTOS） by us is discussed in detail. In this system, we adopt two kinds of parallel structures controlled by RTOS for parallel processing of algorithms. The experimental results show that exploitive period of the system is short, and maintenance convenient. Thus it is suitable for real-time image processing and can get satisfactory effect of image recognition.
基金Projects(50674040, 50539090) supported by the National Natural Science Foundation of ChinaProject(CX07B_128z) supported by the Cultivate Creative Postgraduate Foundation of Jiangsu Province, China
文摘A new meso-mechanical testing scheme based on SEM was developed to carry out the experiment of microfracturing process of rocks. The microfracturing process of the pre-crack marble sample on surrounding rock in the immerged Long-big tunnel in Jinping Cascade II Hydropower Station under uniaxial compression was recorded by using the testing scheme. According to the stereology theory, the propagation and coalescent of cracks at meso-scale were quantitatively investigated with digital technology. Therefore, the basic geometric information of rock microcracks such as area, angle, length, width, perimeter, was obtained from binary images after segmentation. The failure mechanism of specimen under uniaxial compression with the quantitative information was studied from macro and microscopic point of view. The results show that the image of microfracturing process of the specimen can be observed and recorded digitally. During the damage of the specimen, the distribution of microcracks in the specimen is still subjected to exponential distribution with some microcracks concentrated in certain regions. Finally, the change law of the fractal dimension of the local element in marble sample under different external load conditions is obtained by means of the statistical calculation of the fractal dimension.
文摘Parallel versions of prestack KirchhofT 3D integral migration algorithm, which is suitable forseismic data processing, are described in this paper. Firstly, the inherent parallel characteristics of seismicdata processing are analyzed. Then some principles in algorithm partition are discussed. Based on these analyses and the system architecture, communication mechanism, this algorithm is divided into four subtasksallocated to four nodes of 990 STAR-l. Then we describe in detail a module-partitioning method-theI / O processing and communication are separated from the computation process, the processes includingI / O processing and communication are allocated to transputer T805 and the other is allocated to processori860. These two processes are synchronized by shared memory and memory-lock mechanism, but the communication betWeen different nodes is implemented through links of transputer. Load balance among fourprocessor modules is performed dynamically. Finally, we discussed the speed--up of the parallel versions ofprestack KirchhofT 3D integral migration algorithm running on four nodes. Some further researches are also melltioned in this paper.
基金Sponsored by Technology Project Itemof Department of Education of Jilin Province (2006JYT02)
文摘A new method to detect steel ball's surface flaws is presented based on computer techniques of image processing and pattern recognition. The steel ball's surface flaws is the primary factor causing bearing failure. The high efficient and precision detections for the surface flaws of steel ball can be conducted by the presented method, including spot, abrasion, burn, scratch and crack, etc. The design of main components of the detecting system is described in detail including automatic feeding mechanism, automatic spreading mechanism of steel ball's surface, optical system of microscope, image acquisition system, image processing system. The whole automatic system is controlled by an industrial control computer, which can carry out the recognition of flaws of steel ball's surface effectively.
基金This work was supported by the National Science Fund for Distinguished Young Scholars(62325104).
文摘The quality of synthetic aperture radar(SAR)image degrades in the case of multiple imaging projection planes(IPPs)and multiple overlapping ship targets,and then the performance of target classification and recognition can be influenced.For addressing this issue,a method for extracting ship targets with overlaps via the expectation maximization(EM)algorithm is pro-posed.First,the scatterers of ship targets are obtained via the target detection technique.Then,the EM algorithm is applied to extract the scatterers of a single ship target with a single IPP.Afterwards,a novel image amplitude estimation approach is pro-posed,with which the radar image of a single target with a sin-gle IPP can be generated.The proposed method can accom-plish IPP selection and targets separation in the image domain,which can improve the image quality and reserve the target information most possibly.Results of simulated and real mea-sured data demonstrate the effectiveness of the proposed method.
基金supported by the Sharing and Diffusion of National R&D Outcome funded by the Korea Institute of Science and Technology Information
文摘Distributed/parallel-processing system like sun grid engine(SGE) that utilizes multiple nodes/cores is proposed for the faster processing of large sized satellite image data. After verification, distributed process environment for pre-processing performance can be improved by up to 560.65% from single processing system. Through this, analysis performance in various fields can be improved, and moreover, near-real time service can be achieved in near future.
文摘This paper presents partially asynchronous parallel simulation of continuous-system (PAPSoCS) and some approaches to the issues of its implementation on a multicomputer system. To guarantee the simulation results correct and speedup the simulation, the scheme for efficient PAPSoCS is proposed and the virtual topology star is constructed to match the path of message passing for solving algorithm-architecture adequation problem. Under the circumstances that messages frequently passed inter-processor are much shorter, typically within several 4 bytes, asynchronous communication mode is employed to reduce the communication ratio. Experiment results show that asynchronous parallel simulation has much higher efficiency than its synchronous counterpart.
基金supported by the National Natural Science Foundation of China(61872423)Industry Prospective Primary Research&Development Plan of Jiangsu Province(BE2017111)+1 种基金the Scientific Research Foundation of the Higher Education Institutions of Jiangsu Province(19KJA180006)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX20_0764)。
文摘Current applications,consisting of multiple replicas,are packaged into lightweight containers with their execution dependencies.Considering the dominant impact of distribution efficiency of gigantic images on container startup(e.g.,distributed deep learning application),the image“warm-up”technique which prefetches images of these replicas to destination nodes in the cluster is proposed.However,the current image“warm-up”technique solely focuses on identical image distribution,which fails to take effect when distributing different images to destination nodes.To address this problem,this paper proposes Hound,a simple but efficient cluster image distribution system based on Docker.To support diverse image distribution requests of cluster nodes,Hound additionally adopts node-level parallelism(i.e.,downloading images to destination nodes in parallel)to further improve the efficiency of image distribution.The experimental results demonstrate Hound outperforms Docker,kubernetes container runtime interface(CRI-O),and Docker-compose in terms of image distribution performance when cluster nodes request different images.Moreover,the high scalability of Hound is evaluated in the scenario of ten nodes.
基金This project was supported by the National Natural Science Foundation of China (69931010).
文摘To meet the challenge of implementing rapidly advanced, time-consuming medical image processing algorithms, it is necessary to develop a medical image processing technology to process a 2D or 3D medical image dynamically on the web. But in a premier system, only static image processing can be provided with the limitation of web technology. The development of Java and CORBA (common object request broker architecture) overcomes the shortcoming of the web static application and makes the dynamic processing of medical images on the web available. To develop an open solution of distributed computing, we integrate the Java, and web with the CORBA and present a web-based medical image dynamic processing methed, which adopts Java technology as the language to program application and components of the web and utilies the CORBA architecture to cope with heterogeneous property of a complex distributed system. The method also provides a platform-independent, transparent processing architecture to implement the advanced image routines and enable users to access large dataset and resources according to the requirements of medical applications. The experiment in this paper shows that the medical image dynamic processing method implemented on the web by using Java and the CORBA is feasible.
基金Sponsored by National Natural Science Foundation of China(60572098)
文摘ADSP-TS101 is a high performance DSP with good properties of parallel processing and high speed.According to the real-time processing requirements of underwater acoustic communication algorithms,a real-time parallel processing system with multi-channel synchronous sample,which is composed of multiple ADSP-TS101s,is designed and carried out.For the hardware design,field programmable gate array(FPGA)logical control is adopted for the design of multi-channel synchronous sample module and cluster/data flow associated pin connection mode is adopted for multiprocessing parallel processing configuration respectively.And the software is optimized by two kinds of communication ways:broadcast writing way through shared bus and point-to-point way through link ports.Through the whole system installation,connective debugging,and experiments in a lake,the results show that the real-time parallel processing system has good stability and real-time processing capability and meets the technical design requirements of real-time processing.
