The dynamic load distribution within in-service axlebox bearings of high-speed trains is crucial for the fatigue reliability assessment and forward design of axlebox bearings. This paper presents an in situ measuremen...The dynamic load distribution within in-service axlebox bearings of high-speed trains is crucial for the fatigue reliability assessment and forward design of axlebox bearings. This paper presents an in situ measurement of the dynamic load distribution in the four rows of two axlebox bearings on a bogie wheelset of a high-speed train under polygonal wheel–rail excitation. The measurement employed an improved strain-based method to measure the dynamic radial load distribution of roller bearings. The four rows of two axlebox bearings on a wheelset exhibited different ranges of loaded zones and different means of distributed loads. Besides, the mean value and standard deviation of measured roller–raceway contact loads showed non-monotonic variations with the frequency of wheel–rail excitation. The fatigue life of the four bearing rows under polygonal wheel–rail excitation was quantitatively predicted by compiling the measured roller–raceway contact load spectra of the most loaded position and considering the load spectra as input.展开更多
For high-speed railways,the smoothness of the railway line significantly affects the operational speed of trains.When the train passes through the turnout on a long-span bridge,the wheel-rail impacts caused by the tur...For high-speed railways,the smoothness of the railway line significantly affects the operational speed of trains.When the train passes through the turnout on a long-span bridge,the wheel-rail impacts caused by the turnout structure irregularities,and the instability arising from the bridge's flexural deformation lead to a strong coupling effect in the vehicle-turnout-bridge system.This significantly affects both ride comfort and operational safety.For addressing this issue,the present study considered a long-span continuous rigid-frame bridge as an example and established a train-turnout-bridge coupled dynamic model of high-speed railway.Utilizing a selfdeveloped dynamic simulation program,the study analysed the dynamic response characteristics when the train passes through the turnouts on the bridge.It also investigated the influence of different span-to-depth ratios of the bridge on the vehicle dynamic response when the train passes through the main line and branch line of turnouts and then proposed a span-to-depth ratio limit value for a long-span continuous rigid-frame bridge.The research findings suggest that the changes in the span-to-depth ratio have a relatively minor impact on the train’s operational performance but significantly affect the dynamic characteristics of the bridge structure.Based on the findings and a comprehensive assessment of safety indicators,it is advisable to establish a span-to-depth ratio limit of 1/4500 for a long-span continuous rigid-frame bridge.展开更多
Welded Turnout on Large-span Bridge(WTLB)is a complex multi-layer heterogeneous system and can significantly influence the service performance of High-Speed Railway(HSR).Understanding the coupling dynamic response of ...Welded Turnout on Large-span Bridge(WTLB)is a complex multi-layer heterogeneous system and can significantly influence the service performance of High-Speed Railway(HSR).Understanding the coupling dynamic response of the vehicle and WTLB is essential.Previous research did not consider the dynamic behavior of foundations,leading to an underestimation of the vehicle-turnout-foundation coupling dynamic response,particularly when turnouts were laid on large-span bridges.This study proposes a novel modeling method that includes the foundations,to overcome the previous shortcomings by applying a rigid-flexible coupling system.In this approach,the vehicle was modeled as a rigid body sub-model in a Multi-Body Software(MBS),while WTLB was modeled as a flexible bodies sub-model using Finite Element(FE)software.The modal information from the FE model was imported into the MBS software.The two sub-models were coupled by the wheel-rail contact in the MBS environment and then the Vehicle-turnout-bridge Rigid-flexible Coupling Dynamic(VRCD)calculation model was established and it was discovered that the calculation results showed good agreement with the field test data.Through the VRCD model,the safety of the structure,the stability of the vehicle and the comfort of passengers were investigated,as well as several important infrastructure factors.The results demonstrate that this novel method provides accurate calculations and highlights the complex and significant interactions in the vehicle-turnout-bridge system.展开更多
Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent fe...Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.展开更多
The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is great...The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is greater than that under creep conditions,indicating that the dynamic stress field significantly influences the rheological behaviours of sandstone.Following the rheological tests,the number of small pores in the sandstone decreased,while the number of medium-sized pores increased,forming new seepage channels.The high initial rheological stress accelerated fracture compression and the closure of seepage channels,resulting in reduction in the permeability of sandstone.Based on the principles of generalized rheology and the experimental findings,a novel rock rheological constitutive model incorporating both the dynamic stress field and seepage properties has been developed.Numerical simulations of surrounding rock deformation in geotechnical engineering were carried out using a secondary development version of this model,which confirmed the applicability of the generalized rheological numerical simulation method.These results provide theoretical support for the long-term stability evaluation of engineering rock masses and for predicting the deformation of surrounding rock.展开更多
To study the influence of the pantograph fixing position on aerodynamic characteristics of high-speed trains, the aerodynamic models of high-speed trains with eight cars were established based on the theory of com- pu...To study the influence of the pantograph fixing position on aerodynamic characteristics of high-speed trains, the aerodynamic models of high-speed trains with eight cars were established based on the theory of com- putational fluid dynamics, and eight cases with pantographs fixed on different positions and in different operational orientations were considered. The pantographs were fixed on the front or the rear end of the first middle car or fixed on the front or the rear end of the last middle car. The external flow fields of the high-speed trains were numeri- cally simulated using the software STAR-CCM＋. The results show that the pantograph fixing position has little effect on the aerodynamic drag force of the head car and has a large effect on the aerodynamic drag force of the tail car. The influences of the pantograph fixing position on the aerodynamic lift forces of the head car, tail car and pan- tographs are obvious. Among the eight cases, considering the total aerodynamic drag force of the train and the aerodynamic lift force of the lifted pantograph, when the pantographs are fixed on the rear end of the last middle car and the lifted pantograph is in the knuckle-upstream ori- entation, the aerodynamic performance of the high-speed train is the best.展开更多
In this study,we focused on a novel parallel mechanism for utilizing the motion simulator of a high-speed boat(HSB).First,we expressed the real behavior of the HSB based on a seakeeping trial.For this purpose,we recor...In this study,we focused on a novel parallel mechanism for utilizing the motion simulator of a high-speed boat(HSB).First,we expressed the real behavior of the HSB based on a seakeeping trial.For this purpose,we recorded the motion parameters of the HSB by gyroscope and accelerometer sensors,while using a special data acquisition technique.Additionally,a Chebychev highpass filter was applied as a noise filter to the accelerometer sensor.Then,a novel 3 degrees of freedom(DoF)parallel mechanism(1T2R)with prismatic actuators is proposed and analyses were performed on its inverse kinematics,velocity,and acceleration.Finally,the inverse dynamic analysis is presented by the principle of virtual work,and the validation of the analytical equations was compared by the ADAMS simulation software package.Additionally,according to the recorded experimental data of the HSB,the feasibility of the proposed novel parallel mechanism motion simulator of the HSB,as well as the necessity of using of the washout filters,was explored.展开更多
With further increasing in running speed of newer high-speed EMUs（electric multiple units）,higher demand for wheelset dynamic balance is required.In order to study the influence of the dynamic unbalance of wheelset ...With further increasing in running speed of newer high-speed EMUs（electric multiple units）,higher demand for wheelset dynamic balance is required.In order to study the influence of the dynamic unbalance of wheelset on the stability,ride quality,and curving performance for a high-speed car,a detailed dynamic model of a high-speed EMU car is established using the software SIMPACK.The analysis results indicate that the dynamic unbalance of the wheelset significantly influences the dynamic performance of the high-speed car.The increase in dynamic unbalance of the wheelset will decrease the hunting critical speed,worsen the vertical ride quality,and increase the wheelset lateral force,derailment coefficient,and wheel unloading ratio.Therefore,in order to improve the stability,ride quality,and running safety of high-speed car,the values of dynamic unbalance of wheelset should be strictly controlled in manufacturing,and periodically monitored in operation.展开更多
Increasing velocity combined with decreasing mass of modern highspeed trains poses a question about the influence of strong crosswinds on its aerodynamics. Strong crosswinds may affect the running stability of high sp...Increasing velocity combined with decreasing mass of modern highspeed trains poses a question about the influence of strong crosswinds on its aerodynamics. Strong crosswinds may affect the running stability of high speed trains via the amplified aerodynamic forces and moments. In this study, a simulation of turbulent crosswind flows over the leading and end cars of ICE2 highspeed train was performed at different yaw angles in static and moving ground case scenarios. Since the train aerodynamic problems are closely associated with the flows occurring around train, the flow around the train was considered as incompressible and was obtained by solving the incom pressible form of the unsteady Reynoldsaveraged Navier Stokes （RANS） equations combined with the realizable kepsilon turbulence model. Important aerodynamic coef ficients such as the side force and rolling moment coeffi cients were calculated for yaw angles ranging from 30° to 60° and compared with the results obtained from wind tunnel test. The dependence of the flow structure on yaw angle was also presented. The nature of the flow field and its structure depicted by contours of velocity magnitude and streamline patterns along the train＇s crosssection were presented for different yaw angles. In addition, the pressure coefficient around the circumference of the train at dif ferent locations along its length was computed for yaw angles of 30° and 60°, The computed aerodynamic coef ficient outcomes using the realizable kepsilon turbulencemodel were in good agreement with the wind tunnel data. Both the side force coefficient and rolling moment coeffi cients increase steadily with yaw angle till about 50° before starting to exhibit an asymptotic behavior. Contours of velocity magnitude were also computed at different cross sections of the train along its length for different yaw angles. The result showed that magnitude of rotating vortex in the lee ward side increased with increasing yaw angle, which leads to the creation of a lowpressure region in the lee ward side of the train causing high side force and roll moment. Generally, this study shows that unsteady CFD RANS methods combined with an appropriate turbulence model can present an important means of assessing the crucial aerodynamic forces and moments of a highspeed train under strong crosswind conditions.展开更多
Novel centralized base station architectures integrating computation and communication functionalities have become important for the development of future mobile communication networks.Therefore,the development of dyn...Novel centralized base station architectures integrating computation and communication functionalities have become important for the development of future mobile communication networks.Therefore,the development of dynamic high-speed interconnections between baseband units(BBUs)and remote radio heads(RRHs)is vital in centralized base station design.Herein,dynamic high-speed switches(HSSs)connecting BBUs and RRHs were designed for a centralized base station architecture.We analyzed the characteristics of actual traffic and introduced a switch traffic model suitable for the super base station architecture.Then,we proposed a data-priority-aware(DPA)scheduling algorithm based on the traffic model.Lastly,we developed the dynamic HSS model based on the OPNET platform and the prototype based on FPGA.Our results show that the DPA achieves close to 100%throughput with lower latency and provides better run-time complexity than iOCF and HE-iSLIP,thereby demonstrating that the proposed switch system can be adopted in centralized base station architectures.展开更多
Strain hardening,strain rate strengthening and thermal softening data of C5191 phosphor bronze at highspeed blanking are not easy to be obtained with a general measure method,therefore,it is quite difficult to establi...Strain hardening,strain rate strengthening and thermal softening data of C5191 phosphor bronze at highspeed blanking are not easy to be obtained with a general measure method,therefore,it is quite difficult to establish the dynamic constitutive model.To solve this problem,the tensile properties at a strain rate of 1 s^(-1) by GLEEBLE-3500,and dynamic tensile conditions at strain rates of 500,1 000 and 1 500 s^(-1) by split Hopkinson tensile bar (SHTB) apparatus are studied.According to these test data,the classic Johnson-Cook equation is modified.Furthermore,the modified Johnson-Cook equation is validated in the physical simulation model of high-speed blanking.The results show that the strength of C5191 phosphor bronze maintains a certain degree of increase as the strain rate increasing and presents a clear sensitivity to strain rate.The modified Johnson-Cook equation,which has better description accuracy than the classical Johnson-Cook equation,can provide important material parameters for physical simulation models of its high-speed blanking process.展开更多
The evaluation of handover performance is essential for ensuring seamless user experience under innovative application scenarios in the fifth generation(5G)and beyond era,including autonomous driving,mobile augmented ...The evaluation of handover performance is essential for ensuring seamless user experience under innovative application scenarios in the fifth generation(5G)and beyond era,including autonomous driving,mobile augmented and virtual reality.However,due to the hardware constrains of a sectored multiprobe anechoic chamber(SMPAC),switching among multiple channel models is of low precision with a high cost in traditional over-the-air(OTA)test solutions.In this paper,we present an efficient and repeatable emulation strategy to reconstruct dynamic millimeter-wave(mm Wave)channels in laboratories for multiple-input multiple-output(MIMO)mobile devices.Firstly,we propose a novel evaluation metric,called average power angular spectrum similarity percentage(APSP),which minimizes the unexpected impact induced by the indefinite condition of adaptive antenna arrays in mm Wave terminals during handover process.Moreover,we propose a partitioned probe configuration strategy by designing a beam directivitybased switching circuit,which enables quick changes of probe configurations in SMPAC.Simulation results demonstrate the effectiveness of the proposed algorithms,thus providing a guideline for the reconstruction of the dynamic channel in different scenarios with resource limitation.展开更多
This paper summarizes the analytical and experimental dynamic analyses carried out to assess the actual dynamic behaviour of a curved cable-stayed bridge,recently erected in the commercial harbour of Porto Marghera ( ...This paper summarizes the analytical and experimental dynamic analyses carried out to assess the actual dynamic behaviour of a curved cable-stayed bridge,recently erected in the commercial harbour of Porto Marghera ( Venice,Italy). Ambient vibration tests were carried out to determine the dynamic characteristics of the bridge and more than 20 modes were identified in the frequency range 0～10Hz. In the theoretical study,a 3D FE model of the bridge was developed using an integrated CAD-FEA approach; subsequently,the information obtained from the field tests,combined with simple manual tuning,provided a linear elastic model,accurately fitting the modal parameters of the bridge in its present condition.展开更多
Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was f...Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.展开更多
High-speed railway bridges are subjected to normative limitations concerning maximum permissible deck accelerations.For the design of these structures,the European norm EN 1991-2 introduces the high-speed load model(H...High-speed railway bridges are subjected to normative limitations concerning maximum permissible deck accelerations.For the design of these structures,the European norm EN 1991-2 introduces the high-speed load model(HSLM)—a set of point loads intended to include the effects of existing high-speed trains.Yet,the evolution of current trains and the recent development of new load models motivate a discussion regarding the limits of validity of the HSLM.For this study,a large number of randomly generated load models of articulated,conventional,and regular trains are tested and compared with the envelope of HSLM effects.For each type of train,two sets of 100,000 load models are considered:one abiding by the limits of the EN 1991-2 and another considering wider limits.This comparison is achieved using both a bridge-independent metric(train signatures)and dynamic analyses on a case study bridge(the Canelas bridge of the Portuguese Railway Network).For the latter,a methodology to decrease the computational cost of moving loads analysis is introduced.Results show that some theoretical load models constructed within the stipulated limits of the norm can lead to effects not covered by the HSLM.This is especially noted in conventional trains,where there is a relation with larger distances between centres of adjacent vehicle bogies.展开更多
The high-speed train transmission system,experiencing both the internal excitation originating from gear meshing and the external excitation originating from the wheel-rail interaction,exhibits complex dynamic behavio...The high-speed train transmission system,experiencing both the internal excitation originating from gear meshing and the external excitation originating from the wheel-rail interaction,exhibits complex dynamic behavior in the actual service environment.This paper focuses on the gearbox in the high-speed train to carry out the bench test,in which various operat-ing conditions(torques and rotation speeds)were set up and the excitation condition covering both internal and external was created.Acceleration responses on multiple positions of the gearbox were acquired in the test and the vibration behavior of the gearbox was studied.Meanwhile,a stochastic excitation modal test was also carried out on the test bench under different torques,and the modal parameter of the gearbox was identified.Finally,the sweep frequency response of the gearbox under gear meshing excitation was analyzed through dynamic modeling.The results showed that the torque has an attenuating effect on the amplitude of gear meshing frequency on the gearbox,and the effect of external excitation on the gearbox vibration cannot be ignored,especially under the rated operating condition.It was also found that the torque affects the modal param-eter of the gearbox significantly.The torque has a great effect on both the gear meshing stiffness and the bearing stiffness in the transmission system,which is the inherent reason for the changed modal characteristics observed in the modal test and affects the vibration behavior of the gearbox consequently.展开更多
To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at differen...To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at different cross-sections of the pile-board structure for high-speed railway. The dynamic deformation, permanent deformation and dynamic stress of main reinforcements were measured. The test results show that the dynamic responses of the pile-board structure almost did not vary with the forced vibration times under the simulated trainload. After one million times of forced vibration, the permanent deformations of the midspan section of intermediate span and midspan section of side span were 0.7 mm and 0. 6 mm, respectively, and there was no accumulative plastic deformation at the bearing section of intermediate span.展开更多
Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop...Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop test with varying impact energy was conducted to reproduce the dynamic performance of MP1rockbolts under a wide range of seismic event magnitudes. The test results showed that the impact process could be subdivided into four distinct stages, i.e. mobilization, strain hardening, plastic flow(ductile), and rebound stage, of which strain hardening and plastic flow are the primary energy absorbing stages. As the impact energy per drop increases from 8.1 to 46.7 k J, the strain rate of the shank varies between 1.20 and 2.70 s^(-1), and the average impact load is between 240 and 270kN, which may be considered as constant. The MP1 rockbolt has a cumulative maximum energy absorption(CMEA) of 31.9–40.0 k J/m, with an average of 35.0 k J/m, and the elongation rate is 11.4%–14.7%, with an average of 12.7%, both of which are negatively correlated with the impact energy per drop. Regression analysis shows that energy absorption and shank elongation, as well as momentum input and impact duration,conform to the linear relationship. The complete dynamic capacity envelope of MP1 rockbolts is proposed, which reflects the dynamic bearing capacity, elongation, and distinct stages. This study is helpful to better understand the dynamic characteristics of energy-absorbing rockbolts and assist design engineers in robust reinforcement systems design to mitigate rockburst damage in seismically active underground excavations.展开更多
With a transmission system suitable for a medium or large self-propelled cotton picker as the object of the study,the following work focuses on the influence law of an independently designed hydro-mechanical continuou...With a transmission system suitable for a medium or large self-propelled cotton picker as the object of the study,the following work focuses on the influence law of an independently designed hydro-mechanical continuously variable transmission(HMCVT)in the process of changing sections.An HMCVT simulation model was established using the multibody dynamics Simulation X software.The accuracy of the simulation model was verified by comparing the numerical values of the output speed of the HMCVT with model predictions.The HMCVT test bench was built independently using a John Deere 4045HYC11 diesel engine as power input.The engine speed,load torque,oil pressure,and flow of speed regulating valve were considered the influencing factors.The sliding friction power was the response index for the segment change process test.We analysed the reasons for the decrease in output speed during the shifting process,and proposed to effectively reduce the stable speed difference before and after the output shaft shifting by shifting the stage ahead(with displacement ratio of-0.96).This study provides a reference value for the smoothness of the HMCVT of the self-propelled cotton picker,and is relevant in promoting the use of the cotton picker.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 12302238)the National Key Research and Development Program of China (Grant Nos. 2021YFB3400701, 2022YFB3402904)。
文摘The dynamic load distribution within in-service axlebox bearings of high-speed trains is crucial for the fatigue reliability assessment and forward design of axlebox bearings. This paper presents an in situ measurement of the dynamic load distribution in the four rows of two axlebox bearings on a bogie wheelset of a high-speed train under polygonal wheel–rail excitation. The measurement employed an improved strain-based method to measure the dynamic radial load distribution of roller bearings. The four rows of two axlebox bearings on a wheelset exhibited different ranges of loaded zones and different means of distributed loads. Besides, the mean value and standard deviation of measured roller–raceway contact loads showed non-monotonic variations with the frequency of wheel–rail excitation. The fatigue life of the four bearing rows under polygonal wheel–rail excitation was quantitatively predicted by compiling the measured roller–raceway contact load spectra of the most loaded position and considering the load spectra as input.
基金supported by the National Key R&D Program of China(2022YFB2602900)the 111 Project(B20040)the China Railway Science and Technology Research and Development Program Project(N2023T011-A(JB)).
文摘For high-speed railways,the smoothness of the railway line significantly affects the operational speed of trains.When the train passes through the turnout on a long-span bridge,the wheel-rail impacts caused by the turnout structure irregularities,and the instability arising from the bridge's flexural deformation lead to a strong coupling effect in the vehicle-turnout-bridge system.This significantly affects both ride comfort and operational safety.For addressing this issue,the present study considered a long-span continuous rigid-frame bridge as an example and established a train-turnout-bridge coupled dynamic model of high-speed railway.Utilizing a selfdeveloped dynamic simulation program,the study analysed the dynamic response characteristics when the train passes through the turnouts on the bridge.It also investigated the influence of different span-to-depth ratios of the bridge on the vehicle dynamic response when the train passes through the main line and branch line of turnouts and then proposed a span-to-depth ratio limit value for a long-span continuous rigid-frame bridge.The research findings suggest that the changes in the span-to-depth ratio have a relatively minor impact on the train’s operational performance but significantly affect the dynamic characteristics of the bridge structure.Based on the findings and a comprehensive assessment of safety indicators,it is advisable to establish a span-to-depth ratio limit of 1/4500 for a long-span continuous rigid-frame bridge.
基金supported by the National Natural Science Foundation of China(U23A20666)the China National Railway Group Corporation Science and Technology Research and Development Program(N2023G083).
文摘Welded Turnout on Large-span Bridge(WTLB)is a complex multi-layer heterogeneous system and can significantly influence the service performance of High-Speed Railway(HSR).Understanding the coupling dynamic response of the vehicle and WTLB is essential.Previous research did not consider the dynamic behavior of foundations,leading to an underestimation of the vehicle-turnout-foundation coupling dynamic response,particularly when turnouts were laid on large-span bridges.This study proposes a novel modeling method that includes the foundations,to overcome the previous shortcomings by applying a rigid-flexible coupling system.In this approach,the vehicle was modeled as a rigid body sub-model in a Multi-Body Software(MBS),while WTLB was modeled as a flexible bodies sub-model using Finite Element(FE)software.The modal information from the FE model was imported into the MBS software.The two sub-models were coupled by the wheel-rail contact in the MBS environment and then the Vehicle-turnout-bridge Rigid-flexible Coupling Dynamic(VRCD)calculation model was established and it was discovered that the calculation results showed good agreement with the field test data.Through the VRCD model,the safety of the structure,the stability of the vehicle and the comfort of passengers were investigated,as well as several important infrastructure factors.The results demonstrate that this novel method provides accurate calculations and highlights the complex and significant interactions in the vehicle-turnout-bridge system.
文摘Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.
基金supported and financed by Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology (No.2024yjrc96)Anhui Provincial University Excellent Research and Innovation Team Support Project (No.2022AH010053)+2 种基金National Key Research and Development Program of China (Nos.2023YFC2907602 and 2022YFF1303302)Anhui Provincial Major Science and Technology Project (No.202203a07020011)Open Foundation of Joint National-Local Engineering Research Centre for Safe and Precise Coal Mining (No.EC2023020)。
文摘The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is greater than that under creep conditions,indicating that the dynamic stress field significantly influences the rheological behaviours of sandstone.Following the rheological tests,the number of small pores in the sandstone decreased,while the number of medium-sized pores increased,forming new seepage channels.The high initial rheological stress accelerated fracture compression and the closure of seepage channels,resulting in reduction in the permeability of sandstone.Based on the principles of generalized rheology and the experimental findings,a novel rock rheological constitutive model incorporating both the dynamic stress field and seepage properties has been developed.Numerical simulations of surrounding rock deformation in geotechnical engineering were carried out using a secondary development version of this model,which confirmed the applicability of the generalized rheological numerical simulation method.These results provide theoretical support for the long-term stability evaluation of engineering rock masses and for predicting the deformation of surrounding rock.
基金supported by the High-Speed Railway Basic Research Fund Key Project of China(Grant No.U1234208)the National Natural Science Foundation of China(Grant Nos.51475394 and 51605397)
文摘To study the influence of the pantograph fixing position on aerodynamic characteristics of high-speed trains, the aerodynamic models of high-speed trains with eight cars were established based on the theory of com- putational fluid dynamics, and eight cases with pantographs fixed on different positions and in different operational orientations were considered. The pantographs were fixed on the front or the rear end of the first middle car or fixed on the front or the rear end of the last middle car. The external flow fields of the high-speed trains were numeri- cally simulated using the software STAR-CCM＋. The results show that the pantograph fixing position has little effect on the aerodynamic drag force of the head car and has a large effect on the aerodynamic drag force of the tail car. The influences of the pantograph fixing position on the aerodynamic lift forces of the head car, tail car and pan- tographs are obvious. Among the eight cases, considering the total aerodynamic drag force of the train and the aerodynamic lift force of the lifted pantograph, when the pantographs are fixed on the rear end of the last middle car and the lifted pantograph is in the knuckle-upstream ori- entation, the aerodynamic performance of the high-speed train is the best.
文摘In this study,we focused on a novel parallel mechanism for utilizing the motion simulator of a high-speed boat(HSB).First,we expressed the real behavior of the HSB based on a seakeeping trial.For this purpose,we recorded the motion parameters of the HSB by gyroscope and accelerometer sensors,while using a special data acquisition technique.Additionally,a Chebychev highpass filter was applied as a noise filter to the accelerometer sensor.Then,a novel 3 degrees of freedom(DoF)parallel mechanism(1T2R)with prismatic actuators is proposed and analyses were performed on its inverse kinematics,velocity,and acceleration.Finally,the inverse dynamic analysis is presented by the principle of virtual work,and the validation of the analytical equations was compared by the ADAMS simulation software package.Additionally,according to the recorded experimental data of the HSB,the feasibility of the proposed novel parallel mechanism motion simulator of the HSB,as well as the necessity of using of the washout filters,was explored.
基金supported by the National High Technology Research and Development Program of China(2009AA110303-06)the National S&T Program in the 11th Five-Year Plan Period (2009BAG12A02-B02-2)+1 种基金the Program for New Century Excellent Talents in Universities (NCET-10-0664)the Key Program of the Ministry of Railways (2010J003-E)
文摘With further increasing in running speed of newer high-speed EMUs（electric multiple units）,higher demand for wheelset dynamic balance is required.In order to study the influence of the dynamic unbalance of wheelset on the stability,ride quality,and curving performance for a high-speed car,a detailed dynamic model of a high-speed EMU car is established using the software SIMPACK.The analysis results indicate that the dynamic unbalance of the wheelset significantly influences the dynamic performance of the high-speed car.The increase in dynamic unbalance of the wheelset will decrease the hunting critical speed,worsen the vertical ride quality,and increase the wheelset lateral force,derailment coefficient,and wheel unloading ratio.Therefore,in order to improve the stability,ride quality,and running safety of high-speed car,the values of dynamic unbalance of wheelset should be strictly controlled in manufacturing,and periodically monitored in operation.
文摘Increasing velocity combined with decreasing mass of modern highspeed trains poses a question about the influence of strong crosswinds on its aerodynamics. Strong crosswinds may affect the running stability of high speed trains via the amplified aerodynamic forces and moments. In this study, a simulation of turbulent crosswind flows over the leading and end cars of ICE2 highspeed train was performed at different yaw angles in static and moving ground case scenarios. Since the train aerodynamic problems are closely associated with the flows occurring around train, the flow around the train was considered as incompressible and was obtained by solving the incom pressible form of the unsteady Reynoldsaveraged Navier Stokes （RANS） equations combined with the realizable kepsilon turbulence model. Important aerodynamic coef ficients such as the side force and rolling moment coeffi cients were calculated for yaw angles ranging from 30° to 60° and compared with the results obtained from wind tunnel test. The dependence of the flow structure on yaw angle was also presented. The nature of the flow field and its structure depicted by contours of velocity magnitude and streamline patterns along the train＇s crosssection were presented for different yaw angles. In addition, the pressure coefficient around the circumference of the train at dif ferent locations along its length was computed for yaw angles of 30° and 60°, The computed aerodynamic coef ficient outcomes using the realizable kepsilon turbulencemodel were in good agreement with the wind tunnel data. Both the side force coefficient and rolling moment coeffi cients increase steadily with yaw angle till about 50° before starting to exhibit an asymptotic behavior. Contours of velocity magnitude were also computed at different cross sections of the train along its length for different yaw angles. The result showed that magnitude of rotating vortex in the lee ward side increased with increasing yaw angle, which leads to the creation of a lowpressure region in the lee ward side of the train causing high side force and roll moment. Generally, this study shows that unsteady CFD RANS methods combined with an appropriate turbulence model can present an important means of assessing the crucial aerodynamic forces and moments of a highspeed train under strong crosswind conditions.
基金the key project of the National Science and Technology Major Project(Grant No.2018ZX03001017)the project of the CAS engineering laboratory for intelligent agricultural machinery equipment(Grant No.GC201907-02).
文摘Novel centralized base station architectures integrating computation and communication functionalities have become important for the development of future mobile communication networks.Therefore,the development of dynamic high-speed interconnections between baseband units(BBUs)and remote radio heads(RRHs)is vital in centralized base station design.Herein,dynamic high-speed switches(HSSs)connecting BBUs and RRHs were designed for a centralized base station architecture.We analyzed the characteristics of actual traffic and introduced a switch traffic model suitable for the super base station architecture.Then,we proposed a data-priority-aware(DPA)scheduling algorithm based on the traffic model.Lastly,we developed the dynamic HSS model based on the OPNET platform and the prototype based on FPGA.Our results show that the DPA achieves close to 100%throughput with lower latency and provides better run-time complexity than iOCF and HE-iSLIP,thereby demonstrating that the proposed switch system can be adopted in centralized base station architectures.
基金supported by Zhejiang Provincial Natural Science Foundation of China(No.LY18E050005)
文摘Strain hardening,strain rate strengthening and thermal softening data of C5191 phosphor bronze at highspeed blanking are not easy to be obtained with a general measure method,therefore,it is quite difficult to establish the dynamic constitutive model.To solve this problem,the tensile properties at a strain rate of 1 s^(-1) by GLEEBLE-3500,and dynamic tensile conditions at strain rates of 500,1 000 and 1 500 s^(-1) by split Hopkinson tensile bar (SHTB) apparatus are studied.According to these test data,the classic Johnson-Cook equation is modified.Furthermore,the modified Johnson-Cook equation is validated in the physical simulation model of high-speed blanking.The results show that the strength of C5191 phosphor bronze maintains a certain degree of increase as the strain rate increasing and presents a clear sensitivity to strain rate.The modified Johnson-Cook equation,which has better description accuracy than the classical Johnson-Cook equation,can provide important material parameters for physical simulation models of its high-speed blanking process.
基金supported by the National Natural Science Foundation of China(NSFC)under grant U21A20448。
文摘The evaluation of handover performance is essential for ensuring seamless user experience under innovative application scenarios in the fifth generation(5G)and beyond era,including autonomous driving,mobile augmented and virtual reality.However,due to the hardware constrains of a sectored multiprobe anechoic chamber(SMPAC),switching among multiple channel models is of low precision with a high cost in traditional over-the-air(OTA)test solutions.In this paper,we present an efficient and repeatable emulation strategy to reconstruct dynamic millimeter-wave(mm Wave)channels in laboratories for multiple-input multiple-output(MIMO)mobile devices.Firstly,we propose a novel evaluation metric,called average power angular spectrum similarity percentage(APSP),which minimizes the unexpected impact induced by the indefinite condition of adaptive antenna arrays in mm Wave terminals during handover process.Moreover,we propose a partitioned probe configuration strategy by designing a beam directivitybased switching circuit,which enables quick changes of probe configurations in SMPAC.Simulation results demonstrate the effectiveness of the proposed algorithms,thus providing a guideline for the reconstruction of the dynamic channel in different scenarios with resource limitation.
基金support provided by the Italian Ministry of University and Research,under the grant PRIN 2006
文摘This paper summarizes the analytical and experimental dynamic analyses carried out to assess the actual dynamic behaviour of a curved cable-stayed bridge,recently erected in the commercial harbour of Porto Marghera ( Venice,Italy). Ambient vibration tests were carried out to determine the dynamic characteristics of the bridge and more than 20 modes were identified in the frequency range 0～10Hz. In the theoretical study,a 3D FE model of the bridge was developed using an integrated CAD-FEA approach; subsequently,the information obtained from the field tests,combined with simple manual tuning,provided a linear elastic model,accurately fitting the modal parameters of the bridge in its present condition.
文摘Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.
基金This work was financially supported by the Portuguese Foundation for Science and Technology(FCT)through the PhD scholarship PD/BD/143007/2018The authors would like also to acknowledge the financial support of the projects IN2TRACK2-Research into enhanced track and switch and crossing system 2 and IN2TRACK3-Research into optimised and future railway infrastructure funded by European funds through the H2020(SHIFT2RAIL Innovation Programme)and of the Base Funding-UIDB/04708/2020 of the CONSTRUCT-Instituto de I&D em Estruturas e Construções-funded by national funds through the FCT/MCTES(PIDDAC).
文摘High-speed railway bridges are subjected to normative limitations concerning maximum permissible deck accelerations.For the design of these structures,the European norm EN 1991-2 introduces the high-speed load model(HSLM)—a set of point loads intended to include the effects of existing high-speed trains.Yet,the evolution of current trains and the recent development of new load models motivate a discussion regarding the limits of validity of the HSLM.For this study,a large number of randomly generated load models of articulated,conventional,and regular trains are tested and compared with the envelope of HSLM effects.For each type of train,two sets of 100,000 load models are considered:one abiding by the limits of the EN 1991-2 and another considering wider limits.This comparison is achieved using both a bridge-independent metric(train signatures)and dynamic analyses on a case study bridge(the Canelas bridge of the Portuguese Railway Network).For the latter,a methodology to decrease the computational cost of moving loads analysis is introduced.Results show that some theoretical load models constructed within the stipulated limits of the norm can lead to effects not covered by the HSLM.This is especially noted in conventional trains,where there is a relation with larger distances between centres of adjacent vehicle bogies.
基金The authors are grateful for the financial support from the National Key Research and Development Program of China(Grant No.2021YFB3400701)the Fundamental Research Funds for the Central Universities(Science and technology leading talent team project,Grant No.2022JBQY007).
文摘The high-speed train transmission system,experiencing both the internal excitation originating from gear meshing and the external excitation originating from the wheel-rail interaction,exhibits complex dynamic behavior in the actual service environment.This paper focuses on the gearbox in the high-speed train to carry out the bench test,in which various operat-ing conditions(torques and rotation speeds)were set up and the excitation condition covering both internal and external was created.Acceleration responses on multiple positions of the gearbox were acquired in the test and the vibration behavior of the gearbox was studied.Meanwhile,a stochastic excitation modal test was also carried out on the test bench under different torques,and the modal parameter of the gearbox was identified.Finally,the sweep frequency response of the gearbox under gear meshing excitation was analyzed through dynamic modeling.The results showed that the torque has an attenuating effect on the amplitude of gear meshing frequency on the gearbox,and the effect of external excitation on the gearbox vibration cannot be ignored,especially under the rated operating condition.It was also found that the torque affects the modal param-eter of the gearbox significantly.The torque has a great effect on both the gear meshing stiffness and the bearing stiffness in the transmission system,which is the inherent reason for the changed modal characteristics observed in the modal test and affects the vibration behavior of the gearbox consequently.
基金Key Subject for Science Research and De-velopment Plan of Railway Ministry (No.2006G004-B)
文摘To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at different cross-sections of the pile-board structure for high-speed railway. The dynamic deformation, permanent deformation and dynamic stress of main reinforcements were measured. The test results show that the dynamic responses of the pile-board structure almost did not vary with the forced vibration times under the simulated trainload. After one million times of forced vibration, the permanent deformations of the midspan section of intermediate span and midspan section of side span were 0.7 mm and 0. 6 mm, respectively, and there was no accumulative plastic deformation at the bearing section of intermediate span.
基金CCTEG Coal Mining Research Institute(No.TDKC-2022-MS-01)the National Natural Science Foundation of China(No.52274123)the Mining Education Australia(MEA),Collaborative Research Grant Scheme(No.RS-59041).
文摘Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop test with varying impact energy was conducted to reproduce the dynamic performance of MP1rockbolts under a wide range of seismic event magnitudes. The test results showed that the impact process could be subdivided into four distinct stages, i.e. mobilization, strain hardening, plastic flow(ductile), and rebound stage, of which strain hardening and plastic flow are the primary energy absorbing stages. As the impact energy per drop increases from 8.1 to 46.7 k J, the strain rate of the shank varies between 1.20 and 2.70 s^(-1), and the average impact load is between 240 and 270kN, which may be considered as constant. The MP1 rockbolt has a cumulative maximum energy absorption(CMEA) of 31.9–40.0 k J/m, with an average of 35.0 k J/m, and the elongation rate is 11.4%–14.7%, with an average of 12.7%, both of which are negatively correlated with the impact energy per drop. Regression analysis shows that energy absorption and shank elongation, as well as momentum input and impact duration,conform to the linear relationship. The complete dynamic capacity envelope of MP1 rockbolts is proposed, which reflects the dynamic bearing capacity, elongation, and distinct stages. This study is helpful to better understand the dynamic characteristics of energy-absorbing rockbolts and assist design engineers in robust reinforcement systems design to mitigate rockburst damage in seismically active underground excavations.
基金Supported by the National Natural Science Foundation of China(51665051)the Autonomous Region Graduate Innovation Project of China(XJ2019G112)。
文摘With a transmission system suitable for a medium or large self-propelled cotton picker as the object of the study,the following work focuses on the influence law of an independently designed hydro-mechanical continuously variable transmission(HMCVT)in the process of changing sections.An HMCVT simulation model was established using the multibody dynamics Simulation X software.The accuracy of the simulation model was verified by comparing the numerical values of the output speed of the HMCVT with model predictions.The HMCVT test bench was built independently using a John Deere 4045HYC11 diesel engine as power input.The engine speed,load torque,oil pressure,and flow of speed regulating valve were considered the influencing factors.The sliding friction power was the response index for the segment change process test.We analysed the reasons for the decrease in output speed during the shifting process,and proposed to effectively reduce the stable speed difference before and after the output shaft shifting by shifting the stage ahead(with displacement ratio of-0.96).This study provides a reference value for the smoothness of the HMCVT of the self-propelled cotton picker,and is relevant in promoting the use of the cotton picker.
