The effect of Mn element on shock response of CoCrFeNiMn_(x) high entropy alloys(HEAs)are investigated using molecular dynamics simulations.Structural analysis shows that Mn-rich CoCrFeNiMn_(x) HEA has a larger averag...The effect of Mn element on shock response of CoCrFeNiMn_(x) high entropy alloys(HEAs)are investigated using molecular dynamics simulations.Structural analysis shows that Mn-rich CoCrFeNiMn_(x) HEA has a larger average atomic volume.The elastic properties of CoCrFeNiMn_(x) HEAs under various hydrostatic pressures are studied,revealing that the elastic modulus decreases with increasing of Mn content.The shock thermodynamic parameters are quantitatively analyzed.The Mn-dependent shock Hugoniot relationship of CoCrFeNiMn_(x) HEAs is obtained:Us=1.25+(5.21–0.011x)Up.At relatively high shock pressure,the increase in Mn content promotes the formation of clustered BCC structures and hinders the development of dislocations.In addition,more FCC structures in Mn-rich CoCrFeNiMn_(x) HEAs transform into disordered structures during spallation.Spall strength decreases with increasing Mn content.This study can provide a reference for the design and application of CoCrFeNiMn HEAs under shock loading.展开更多
Compared to traditional pure metals or alloys based on just one principal element,high entropy alloys(HEAs)exhibit notable structural and physical characteristics,drawing significant attention.While significant advanc...Compared to traditional pure metals or alloys based on just one principal element,high entropy alloys(HEAs)exhibit notable structural and physical characteristics,drawing significant attention.While significant advancements have been made in the synthesis and utilization of HEAs,there is a lack of comprehensive understanding and systematic approach towards the rational design of electrocatalysts.This review begins by introducing the fundamental principles and impacts of HEAs,followed by an overview of traditional and emerging synthesis techniques;in particular,we categorize and critically analyze approaches.Subsequently,a detailed examination of the advancements and comparative performance of HEAs in specific electrocatalytic reactions is presented.The paper concludes by outlining the current challenges and opportunities associated with HEAs catalysts,along with offering personal insights on potential future developments.展开更多
The high entropy alloys(HEAs)are the newly developed high-performance materials that have gained significant importance in defence,nuclear and aerospace sector due to their superior mechanical properties,heat resistan...The high entropy alloys(HEAs)are the newly developed high-performance materials that have gained significant importance in defence,nuclear and aerospace sector due to their superior mechanical properties,heat resistance,high temperature strength and corrosion resistance.These alloys are manufactured by the equal mixing or larger proportions of five or more alloying elements.HEAs exhibit superior mechanical performance compared to traditional engineering alloys because of the extensive alloying composition and higher entropy of mixing.Solid state welding(SSW)techniques such as friction stir welding(FSW),rotary friction welding(RFW),diffusion bonding(DB)and explosive welding(EW)have been efficiently deployed for improving the microstructural integrity and mechanical properties of welded HEA joints.The HEA interlayers revealed greater potential in supressing the formation of deleterious intermetallic phases and maximizing the mechanical properties of HEAs joints.The similar and dissimilar joining of HEAs has been manifested to be viable for HEA systems which further expands their industrial applications.Thus,the main objective of this review paper is to present a critical review of current state of research,challenges and opportunities and main directions in SSW of HEAs mainly CoCrFeNiMn and Al_xCoCrFeNi alloys.The state of the art of problems,progress and future outlook in SSW of HEAs are critically reviewed by considering the formation of phases,microstructural evolution and mechanical properties of HEAs joints.展开更多
03-type layered metal oxides hold great promise for sodium-ion batteries cathodes owing to their energy density advantage.However,the severe irreversible phase transition and sluggish Na^(+)diffusion kinetics pose sig...03-type layered metal oxides hold great promise for sodium-ion batteries cathodes owing to their energy density advantage.However,the severe irreversible phase transition and sluggish Na^(+)diffusion kinetics pose significant challenges to achieve high-performance layered cathodes.Herein,a boron-doped03-type high entropy oxide Na(Fe_(0.2)Co_(0.15)Cu_(0.05)Ni_(0.2)Mn_(0.2)Ti_(0.2))B_(0.02)O_(2)(NFCCNMT-B_(0.02))is designed and the covalent B-O bonds with high entropy configuration ensure a robust layered structure.The obtained cathode NFCCNMT-B_(0.02)exhibits impressive cycling performance(capacity retention of 95%and 82%after100 cycles and 300 cycles at 1 and 10 C,respectively)and outstanding rate capability(capacity of 83 mAh g^(-1)at 10 C).Furthermore,the NFCCNMT-B_(0.02)demonstrates a superior wide-temperature performance,maintaining the same capacity level(113,4 mAh g^(-1)@-20℃,121 mAh g^(-1)@25℃,and 119 mAh g^(-1)@60℃)and superior cycle stability(90%capacity retention after 100 cycles at 1 C at-20℃).The high-entropy configuration design with boron doping strategy contributes to the excellent sodium-ion storage performance.The high-entropy configuration design effectively suppresses irreversible phase transitions accompanied by small volume changes(ΔV=0.65 A3).B ions doping expands the Na layer distance and enlarges the P3 phase region,thereby enhancing Na^(+)diffusion kinetics.This work offers valuable insights into design of high-performance layered cathodes for sodium-ion batteries operating across a wide temperature.展开更多
Al-FeCoNiCrAl high entropy alloy(HEA) composite coatings were prepared on Ti-6Al-4V via highenergy mechanical alloying(MA). The microstructures and phase composition of the coatings were studied. A continuous and dens...Al-FeCoNiCrAl high entropy alloy(HEA) composite coatings were prepared on Ti-6Al-4V via highenergy mechanical alloying(MA). The microstructures and phase composition of the coatings were studied. A continuous and dense coating could be fabricated at a ratio of 35%(weight fraction)Al-FeCoNiCrAl after 4 h milling.The results showed that the thickness of the composite coatings increased first and then decreased with the increase of milling time. And the hardness of coating increased with the increase of milling time. The phase changed during the annealing process. Part of the initial body-centered cubic(BCC)phase of the composite coatings changed into the L12 phase,(Ni,Co)3Al4 and σ phase after annealing above 550 ℃. Ordered BCC was found in the coatings after annealing above 750 ℃. Only BCC and ordered BCC appeared in coatings after annealing above 1 050 ℃. The hardness of the coatings after annealing at 550 ℃ and 750 ℃ was higher than before because of spinodal decomposition and high hardness σ phase. The hardness of the coatings after annealing at 1 050 ℃ decreased because residual stress released.展开更多
Effects of Ti addition on the microstructures and mechanical properties of AICrFeNiMo0.5 Tix （x = 0, 0.25, 0.4, 0.5, 0.6, 0.75） high entropy alloys （HEAs） are investigated. All these HEAs of various Ti contents po...Effects of Ti addition on the microstructures and mechanical properties of AICrFeNiMo0.5 Tix （x = 0, 0.25, 0.4, 0.5, 0.6, 0.75） high entropy alloys （HEAs） are investigated. All these HEAs of various Ti contents possess dual BCC structures, indicating that Ti addition does not induce the formation of any new phase in these alloys. As Ti addition x varies from 0 to 0.75, the Vickers hardness （HV） of the alloy system increases from 623.7HV to 766.2HV, whereas the compressive yield stress firstly increases and then decreases with increasing x above 0.5. Meanwhile, the compressive ductility of the alloy system decreases with Ti addition. The AlCrFeNiMo0.5 Ti0.6 and AlCrFeNiMo0.5Ti0.75 HEAs become brittle and fracture with very limited plasticity. In the AlCrFeNiMo0.5Tix HEAs, the AlCrFeNiMoo.5 HEA possesses the highest compressive fracture strength of 4027 MPa and the largest compressive plastic strain of 27.9%, while the AlCrFeNiMo0.5 Ti0.5 HEA has the highest compressive yield strength of 2229 MPa and a compressive plastic strain of 10.1%. The combination of high strength and large plasticity of the AICrFeNiMoo.sTix （x = 0, 0.25, 0.4, 0.5） HEAs demonstrates that this alloy system is very promising for engineering applications.展开更多
The development of tellurium(Te)-based semiconductor nanomaterials for efficient light-to-heat conversion may offer an effective means of harvesting sunlight to address global energy concerns.However,the nanosized Te(...The development of tellurium(Te)-based semiconductor nanomaterials for efficient light-to-heat conversion may offer an effective means of harvesting sunlight to address global energy concerns.However,the nanosized Te(nano-Te)materials reported to date suffer from a series of drawbacks,including limited light absorption and a lack of surface structures.Herein,we report the preparation of nano-Te by electrochemical exfoliation using an electrolyzable room-temperature ionic liquid.Anions,cations,and their corresponding electrolytic products acting as chemical scissors can precisely intercalate and functionalize bulk Te.The resulting nano-Te has high morphological entropy,rich surface functional groups,and broad light absorption.We also constructed foam hydrogels based on poly(vinyl alcohol)/nano-Te,which achieved an evaporation rate and energy efficiency of 4.11 kg m^(−2)h^(−1)and 128%,respectively,under 1 sun irradiation.Furthermore,the evaporation rate was maintained in the range 2.5-3.0 kg m^(−2)h^(−1)outdoors under 0.5-1.0 sun,providing highly efficient evaporation under low light conditions.展开更多
Molecular dynamics simulations are performed to investigate the mechanical behavior of nanotwinned NiCo-based alloys containing coherent L1_(2) nano-precipitates at different temperatures,as well as the interactions b...Molecular dynamics simulations are performed to investigate the mechanical behavior of nanotwinned NiCo-based alloys containing coherent L1_(2) nano-precipitates at different temperatures,as well as the interactions between the dislocations and nano-precipitates within the nanotwins.The simulation results demonstrate that both the yield stress and flow stress in the nanotwinned NiCo-based alloys with nano-precipitates decrease as the temperature rises,because the higher temperatures lead to the generation of more defects during yielding and lower dislocation density during plastic deformation.Moreover,the coherent L1_(2) phase exhibits excellent thermal stability,which enables the hinderance of dislocation motion at elevated temperatures via the wrapping and cutting mechanisms of dislocations.The synergistic effect of nanotwins and nano-precipitates results in more significant strengthening behavior in the nanotwinned NiCo-based alloys under high temperatures.In addition,the high-temperature mechanical behavior of nanotwinned NiCo-based alloys with nano-precipitates is sensitive to the size and volume fraction of the microstructures.These findings could be helpful for the design of nanotwins and nano-precipitates to improve the high-temperature mechanical properties of NiCo-based alloys.展开更多
There have been many interesting studies on high-entropy alloys（HEAs）, also known as multi-component（MC） alloys（MCAs）, in recent years. MC metallic-glasses（MGs） have shown the potential to express the advantag...There have been many interesting studies on high-entropy alloys（HEAs）, also known as multi-component（MC） alloys（MCAs）, in recent years. MC metallic-glasses（MGs） have shown the potential to express the advantages of MCAs and MGs in tandem. Amorphous phase formation rules are a crucial issue in the HEA and MCA field. For equal or near-equal atomic ratio alloys, mixed-entropy among the elements has a significant effect on the phase formation. This paper focuses on HEA amorphous phase formation rules. In the first two sections, the recent progress in amorphous phase formation in HEAs and MCAs is reviewed, including the effective factors and correlative parameters related to amorphous phase formation. In the third section, novel MCMGs including high-entropy（HE） bulk-metallic-glass（HE-BMG） and MCMG films developed in recent decades are summarized, and the giant-magnetic-impedance（GMI） effect of MC amorphous fibers is discussed.展开更多
This work aimed to(i)understand conventional and pulse gas tungsten arc welding(GTAW)of AZ31B,and(ii)explore high frequency welding(100 Hz-1500 Hz).GTA welding with alternating current(AC)and direct current electrode ...This work aimed to(i)understand conventional and pulse gas tungsten arc welding(GTAW)of AZ31B,and(ii)explore high frequency welding(100 Hz-1500 Hz).GTA welding with alternating current(AC)and direct current electrode positive(DCEP)polarities yielded crack-free partial penetration welds for6 mm thick AZ31B alloy sheet.Welding under direct current electrode negative(DCEN)polarity with identical parameters as that for AC and DCEP resulted in full penetration welds that had microcracks.Defect-free full-penetration welds could be accomplished with pulse GTA welding using DCEN polarity at a pulse frequency of 1 Hz with a pulse duration ratio of 1:1.The resultant DCEN P 1:1 weld metal had a microstructure finer than the conventional DCEN weld.Welds produced with pulse duration ratios of 1:2and 1:4 lacked penetration but had a much finer microstructures because of the lower heat input.The arc constriction by the high frequency pulsing in the Activ Arc■-High frequency(AA-HF)mode welding was responsible for deeper penetration.Welds produced under DCEN pulsing and AA-HF conditions had hardness higher than conventional DCEN,DCEP and AC GTA welds,attributed to the finer microstructure.AA-HF GTA welding produced defect free deeper penetration welds with good microstructural features/mechanical properties and also gave an advantage of 50%enhanced productivity when welded at1500 Hz.展开更多
With the recent development of high entropy materials, an alternative approach to develop advanced functional materials with distinctive properties that show improved values compared to conventional materials has been...With the recent development of high entropy materials, an alternative approach to develop advanced functional materials with distinctive properties that show improved values compared to conventional materials has been provided. The high entropy concept was later successfully transferred to metal fluorides and high entropy fluorides(HEFs) were successfully synthesized. Owing to their high theoretical specific capacities in energy storage applications, HEFs were utilized as cathode materials for lithiumion batteries(LIBs) and their underlying storage mechanisms were investigated. Instead of a step-bystep reduction of each individual metal cation, the HEFs seem to exhibit a single-step reduction process,indicating a solid solution compound instead of merely a mixture of different metal fluorides. It was also observed that the electrochemical behavior of the HEFs depends on each individual incorporated element. Therefore, by altering the elemental composition, new materials that exhibit improved electrochemical properties can be designed. Remarkably, HEFs with seven incorporated metal elements exhibited a better cycling stability as well as a lower hysteresis compared to binary metal fluorides.These findings offer new guidelines for material design and tailoring towards high performance LIBs.展开更多
Developing highly effective and stable non-noble metalbased bifunctional catalyst working at high current density is an urgent issue for water electrolysis(WE).Herein,we prepare the N-doped graphene-decorated NiCo all...Developing highly effective and stable non-noble metalbased bifunctional catalyst working at high current density is an urgent issue for water electrolysis(WE).Herein,we prepare the N-doped graphene-decorated NiCo alloy coupled with mesoporous NiCoMoO nano-sheet grown on 3D nickel foam(NiCo@C-NiCoMoO/NF)for water splitting.NiCo@C-NiCoMoO/NF exhibits outstanding activity with low overpotentials for hydrogen and oxygen evolution reaction(HER:39/266 mV;OER:260/390 mV)at±10 and±1000 mA cm^(−2).More importantly,in 6.0 M KOH solution at 60℃ for WE,it only requires 1.90 V to reach 1000 mA cm−2 and shows excellent stability for 43 h,exhibiting the potential for actual application.The good performance can be assigned to N-doped graphene-decorated NiCo alloy and mesoporous NiCoMoO nano-sheet,which not only increase the intrinsic activity and expose abundant catalytic activity sites,but also enhance its chemical and mechanical stability.This work thus could provide a promising material for industrial hydrogen production.展开更多
Numerical analysis is critically important to understanding the complex deformation mechanics that occur during sheet forming processes.It has been widely used in simulation of sheet metal forming processes at room te...Numerical analysis is critically important to understanding the complex deformation mechanics that occur during sheet forming processes.It has been widely used in simulation of sheet metal forming processes at room temperature in the automotive industry.However,material at elevated temperature behaves more differently than at room temperature and specific material parameters and models need to be developed for the simulation of warm forming.Based on the experimental investigation of material behavior of high strength aluminum alloy 7075(AA7075),constitutive equations with strain rate sensitivity at 140,180 and 220 ℃ are developed.Anisotropic yield criterion Barlat 89 is used in the simulation.Warm forming of limit dome height tests and limit drawing ratio tests of AA7075 at 140,180 and 220℃are performed.Forming limit diagrams developed from experiment at several elevated temperatures in the previous study are used to predict the failure in the simulation results.Punch force and displacement predicted from simulation are compared with the experimental data.Simulation results agree with experimental results,so the developed material model can be used to accurately predict material behavior during isothermal warm forming of the AA7075-T6 alloy.展开更多
Our recent progress on magnetic entropy change（S） involving martensitic transition in both conventional and metamagnetic NiMn-based Heusler alloys is reviewed.For the conventional alloys,where both martensite and au...Our recent progress on magnetic entropy change（S） involving martensitic transition in both conventional and metamagnetic NiMn-based Heusler alloys is reviewed.For the conventional alloys,where both martensite and austenite exhibit ferromagnetic（FM） behavior but show different magnetic anisotropies,a positive S as large as 4.1 J·kg^-1·K^-1 under a field change of 0-0.9 T was first observed at martensitic transition temperature T M～197 K.Through adjusting the Ni：Mn：Ga ratio to affect valence electron concentration e/a,T M was successfully tuned to room temperature,and a large negative S was observed in a single crystal.The △S attained 18.0 J·kg^-1·K^-1 under a field change of 0-5 T.We also focused on the metamagnetic alloys that show mechanisms different from the conventional ones.It was found that post-annealing in suitable conditions or introducing interstitial H atoms can shift the T M across a wide temperature range while retaining the strong metamagnetic behavior,and hence,retaining large magnetocaloric effect（MCE） and magnetoresistance（MR）.The melt-spun technique can disorder atoms and make the ribbons display a B2 structure,but the metamagnetic behavior,as well as the MCE,becomes weak due to the enhanced saturated magnetization of martensites.We also studied the effect of Fe/Co co-doping in Ni 45（Co1-xFex）5 Mn36.6In13.4 metamagnetic alloys.Introduction of Fe atoms can assist the conversion of the Mn-Mn coupling from antiferromagnetic to ferromagnetic,thus maintaining the strong metamagnetic behavior and large MCE and MR.Furthermore,a small thermal hysteresis but significant magnetic hysteresis was observed around TM in Ni51Mn49-xInx metamagnetic systems,which must be related to different nucleation mechanisms of structural transition under different external perturbations.展开更多
In high intensity focused ultrasound(HIFU)treatment,it is crucial to accurately identify denatured and normal biological tissues.In this paper,a novel method based on compressed sensing(CS)and refined composite multi-...In high intensity focused ultrasound(HIFU)treatment,it is crucial to accurately identify denatured and normal biological tissues.In this paper,a novel method based on compressed sensing(CS)and refined composite multi-scale fuzzy entropy(RCMFE)is proposed.First,CS is used to denoise the HIFU echo signals.Then the multi-scale fuzzy entropy(MFE)and RCMFE of the denoised HIFU echo signals are calculated.This study analyzed 90 cases of HIFU echo signals,including 45 cases in normal status and 45 cases in denatured status,and the results show that although both MFE and RCMFE can be used to identify denatured tissues,the intra-class distance of RCMFE on each scale factor is smaller than MFE,and the inter-class distance is larger than MFE.Compared with MFE,RCMFE can calculate the complexity of the signal more accurately and improve the stability,compactness,and separability.When RCMFE is selected as the characteristic parameter,the RCMFE difference between denatured and normal biological tissues is more evident than that of MFE,which helps doctors evaluate the treatment effect more accurately.When the scale factor is selected as 16,the best distinguishing effect can be obtained.展开更多
In this study, compounded surface modification technology-high current pulsed electron beam （HCPEB） ＋ micro-plasma oxidation （MPO） was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of...In this study, compounded surface modification technology-high current pulsed electron beam （HCPEB） ＋ micro-plasma oxidation （MPO） was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of ZK60 Mg alloy after single MPO and HCPEB＋MPO compounded treatment were investigated by SEM. The results showed that the density of the ceramic layer of HCPEB＋MPO-treated ZK60 Mg alloy was improved and defects were reduced compared to that under MPO treatment alone. Surface modified layer of ZK60 Mg alloys treated by HCPEB＋MPO was divided into three zones, namely the top loose ceramic zone, middle compact zone and inside HCPEB-induced melted zone. Corrosion resistance of ZK60 Mg alloy before and after the compounded surface modification was measured in a solution of 3.5% NaCl by potentiodynamic polarization curves. It was found that the corrosion current density of ZK60 Mg alloys could be reduced by about three orders of magnitude, from 311μA/cm^2 of the original sample to 0.2μA/cm^2 of the HCPEB＋MPO-treated sample. This indicates the great application potential of the HCPEB＋MPO compounded surface modification technology in improving the corrosion resistance of ZK60 Mg alloys in the future.展开更多
By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) ...By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band(ASB) at low compression strain, while bimodal alloy is considerably ASBresistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB.In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary a grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of a lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of a/β nanomultilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.展开更多
Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse directi...Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse direction(TD)and normal direction(ND))were carried out at strain rates of 1000,2000 and 4000 s-1,respectively.From the microscopic point of view,the effect of strain rate and anisotropy on tension compression asymmetry of aviation aluminum alloy 7050 was studied by scanning electron microscope(SEM),metallographic microscope and electron backscatter diffraction(EBSD).The results showed that there was obvious asymmetry between tension and compression,especially that the yield strength of the material in tension was higher than that in compression.The asymmetry in the elastic stage of tension-compression was weaker and the asymmetry in the strengthening stage was stronger with the increase of strain rate.At the same strain rate,the changing trend of the flow stress was distinct under different orientations of tension and compression,which was related to the stress direction of the grains.According to EBSD grain orientation analysis and raw material texture pole figure analysis,it was found that the larger the difference in the degree of grain refinement during tension and compression,the larger the macro-flow stress difference.展开更多
When a high impedance fault(HIF)occurs in a distribution network,the detection efficiency of traditional protection devices is strongly limited by the weak fault information.In this study,a method based on S-transform...When a high impedance fault(HIF)occurs in a distribution network,the detection efficiency of traditional protection devices is strongly limited by the weak fault information.In this study,a method based on S-transform(ST)and average singular entropy(ASE)is proposed to identify HIFs.First,a wavelet packet transform(WPT)was applied to extract the feature frequency band.Thereafter,the ST was investigated in each half cycle.Afterwards,the obtained time-frequency matrix was denoised by singular value decomposition(SVD),followed by the calculation of the ASE index.Finally,an appropriate threshold was selected to detect the HIFs.The advantages of this method are the ability of fine band division,adaptive time-frequency transformation,and quantitative expression of signal complexity.The performance of the proposed method was verified by simulated and field data,and further analysis revealed that it could still achieve good results under different conditions.展开更多
A waterproof nanocrystalline soft magnetic alloy core with a size of O.D.850 mm×I.D.316 mm×H.25 mm for radio frequency acceleration was successfully developed by winding 18μm 1k107b MA ribbons.Theμ'_(p...A waterproof nanocrystalline soft magnetic alloy core with a size of O.D.850 mm×I.D.316 mm×H.25 mm for radio frequency acceleration was successfully developed by winding 18μm 1k107b MA ribbons.Theμ'_(p)Qf products reached 7.5,10,and 12 GHz at 1,3,and 5 MHz,respectively.Theμ'_(p)Qf products of the MA core(O.D.250 mm×I.D.100 mm×H.25 mm)manufactured using a 13μm MA ribbon further increased by 30%.Detailed improvements on the MA core manufacture process are discussed herein.Continuous high-power tests on the new MA cores demonstrated its good performance of waterproofness,particularly its stability of highμ'_(p)Qf products.The MA core with highμ'pQf product and large size can operate under a high average RF power,high electric field,and in deionized water,which will be used in the China Spallation Neutron Source PhaseⅡ(CSNS-Ⅱ).展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11802139).
文摘The effect of Mn element on shock response of CoCrFeNiMn_(x) high entropy alloys(HEAs)are investigated using molecular dynamics simulations.Structural analysis shows that Mn-rich CoCrFeNiMn_(x) HEA has a larger average atomic volume.The elastic properties of CoCrFeNiMn_(x) HEAs under various hydrostatic pressures are studied,revealing that the elastic modulus decreases with increasing of Mn content.The shock thermodynamic parameters are quantitatively analyzed.The Mn-dependent shock Hugoniot relationship of CoCrFeNiMn_(x) HEAs is obtained:Us=1.25+(5.21–0.011x)Up.At relatively high shock pressure,the increase in Mn content promotes the formation of clustered BCC structures and hinders the development of dislocations.In addition,more FCC structures in Mn-rich CoCrFeNiMn_(x) HEAs transform into disordered structures during spallation.Spall strength decreases with increasing Mn content.This study can provide a reference for the design and application of CoCrFeNiMn HEAs under shock loading.
基金the financial support by the National Natural Science Foundation of China(52102241)the Primary Research and Development Program of Anhui Province(201904a05020087)the Doctor of Suzhou University Scientific Research Foundation(2022BSK019)。
文摘Compared to traditional pure metals or alloys based on just one principal element,high entropy alloys(HEAs)exhibit notable structural and physical characteristics,drawing significant attention.While significant advancements have been made in the synthesis and utilization of HEAs,there is a lack of comprehensive understanding and systematic approach towards the rational design of electrocatalysts.This review begins by introducing the fundamental principles and impacts of HEAs,followed by an overview of traditional and emerging synthesis techniques;in particular,we categorize and critically analyze approaches.Subsequently,a detailed examination of the advancements and comparative performance of HEAs in specific electrocatalytic reactions is presented.The paper concludes by outlining the current challenges and opportunities associated with HEAs catalysts,along with offering personal insights on potential future developments.
基金financially supported by Ministry of Science and Higher Education of the Russian Federation(Grant No.FENU-2023-0013)。
文摘The high entropy alloys(HEAs)are the newly developed high-performance materials that have gained significant importance in defence,nuclear and aerospace sector due to their superior mechanical properties,heat resistance,high temperature strength and corrosion resistance.These alloys are manufactured by the equal mixing or larger proportions of five or more alloying elements.HEAs exhibit superior mechanical performance compared to traditional engineering alloys because of the extensive alloying composition and higher entropy of mixing.Solid state welding(SSW)techniques such as friction stir welding(FSW),rotary friction welding(RFW),diffusion bonding(DB)and explosive welding(EW)have been efficiently deployed for improving the microstructural integrity and mechanical properties of welded HEA joints.The HEA interlayers revealed greater potential in supressing the formation of deleterious intermetallic phases and maximizing the mechanical properties of HEAs joints.The similar and dissimilar joining of HEAs has been manifested to be viable for HEA systems which further expands their industrial applications.Thus,the main objective of this review paper is to present a critical review of current state of research,challenges and opportunities and main directions in SSW of HEAs mainly CoCrFeNiMn and Al_xCoCrFeNi alloys.The state of the art of problems,progress and future outlook in SSW of HEAs are critically reviewed by considering the formation of phases,microstructural evolution and mechanical properties of HEAs joints.
基金financially supported by the National Natural Science Foundation of China(No.52071073,52177208,and52171202)Hebei Province“333 talent project”(No.C20221012)+1 种基金the Science and Technology Project of Hebei Education Department(BJK2023005)Hebei Province Graduate Innovation Funding Program CXZZBS2024177。
文摘03-type layered metal oxides hold great promise for sodium-ion batteries cathodes owing to their energy density advantage.However,the severe irreversible phase transition and sluggish Na^(+)diffusion kinetics pose significant challenges to achieve high-performance layered cathodes.Herein,a boron-doped03-type high entropy oxide Na(Fe_(0.2)Co_(0.15)Cu_(0.05)Ni_(0.2)Mn_(0.2)Ti_(0.2))B_(0.02)O_(2)(NFCCNMT-B_(0.02))is designed and the covalent B-O bonds with high entropy configuration ensure a robust layered structure.The obtained cathode NFCCNMT-B_(0.02)exhibits impressive cycling performance(capacity retention of 95%and 82%after100 cycles and 300 cycles at 1 and 10 C,respectively)and outstanding rate capability(capacity of 83 mAh g^(-1)at 10 C).Furthermore,the NFCCNMT-B_(0.02)demonstrates a superior wide-temperature performance,maintaining the same capacity level(113,4 mAh g^(-1)@-20℃,121 mAh g^(-1)@25℃,and 119 mAh g^(-1)@60℃)and superior cycle stability(90%capacity retention after 100 cycles at 1 C at-20℃).The high-entropy configuration design with boron doping strategy contributes to the excellent sodium-ion storage performance.The high-entropy configuration design effectively suppresses irreversible phase transitions accompanied by small volume changes(ΔV=0.65 A3).B ions doping expands the Na layer distance and enlarges the P3 phase region,thereby enhancing Na^(+)diffusion kinetics.This work offers valuable insights into design of high-performance layered cathodes for sodium-ion batteries operating across a wide temperature.
文摘Al-FeCoNiCrAl high entropy alloy(HEA) composite coatings were prepared on Ti-6Al-4V via highenergy mechanical alloying(MA). The microstructures and phase composition of the coatings were studied. A continuous and dense coating could be fabricated at a ratio of 35%(weight fraction)Al-FeCoNiCrAl after 4 h milling.The results showed that the thickness of the composite coatings increased first and then decreased with the increase of milling time. And the hardness of coating increased with the increase of milling time. The phase changed during the annealing process. Part of the initial body-centered cubic(BCC)phase of the composite coatings changed into the L12 phase,(Ni,Co)3Al4 and σ phase after annealing above 550 ℃. Ordered BCC was found in the coatings after annealing above 750 ℃. Only BCC and ordered BCC appeared in coatings after annealing above 1 050 ℃. The hardness of the coatings after annealing at 550 ℃ and 750 ℃ was higher than before because of spinodal decomposition and high hardness σ phase. The hardness of the coatings after annealing at 1 050 ℃ decreased because residual stress released.
基金Supported by the National Natural Science Foundation of China under Grant No 51571127
文摘Effects of Ti addition on the microstructures and mechanical properties of AICrFeNiMo0.5 Tix （x = 0, 0.25, 0.4, 0.5, 0.6, 0.75） high entropy alloys （HEAs） are investigated. All these HEAs of various Ti contents possess dual BCC structures, indicating that Ti addition does not induce the formation of any new phase in these alloys. As Ti addition x varies from 0 to 0.75, the Vickers hardness （HV） of the alloy system increases from 623.7HV to 766.2HV, whereas the compressive yield stress firstly increases and then decreases with increasing x above 0.5. Meanwhile, the compressive ductility of the alloy system decreases with Ti addition. The AlCrFeNiMo0.5 Ti0.6 and AlCrFeNiMo0.5Ti0.75 HEAs become brittle and fracture with very limited plasticity. In the AlCrFeNiMo0.5Tix HEAs, the AlCrFeNiMoo.5 HEA possesses the highest compressive fracture strength of 4027 MPa and the largest compressive plastic strain of 27.9%, while the AlCrFeNiMo0.5 Ti0.5 HEA has the highest compressive yield strength of 2229 MPa and a compressive plastic strain of 10.1%. The combination of high strength and large plasticity of the AICrFeNiMoo.sTix （x = 0, 0.25, 0.4, 0.5） HEAs demonstrates that this alloy system is very promising for engineering applications.
基金the Science and Technology Innovation Council of Shenzhen(Grant Nos.JCYJ20200109105212568,KQTD20170810105439418,JCYJ20200109114237902,20200812203318002,and 20200810103814002)the National Natural Science Foundation of China(Grant No.12274197)the Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2023A1515030240,2019A1515010790,2021A0505110015).
文摘The development of tellurium(Te)-based semiconductor nanomaterials for efficient light-to-heat conversion may offer an effective means of harvesting sunlight to address global energy concerns.However,the nanosized Te(nano-Te)materials reported to date suffer from a series of drawbacks,including limited light absorption and a lack of surface structures.Herein,we report the preparation of nano-Te by electrochemical exfoliation using an electrolyzable room-temperature ionic liquid.Anions,cations,and their corresponding electrolytic products acting as chemical scissors can precisely intercalate and functionalize bulk Te.The resulting nano-Te has high morphological entropy,rich surface functional groups,and broad light absorption.We also constructed foam hydrogels based on poly(vinyl alcohol)/nano-Te,which achieved an evaporation rate and energy efficiency of 4.11 kg m^(−2)h^(−1)and 128%,respectively,under 1 sun irradiation.Furthermore,the evaporation rate was maintained in the range 2.5-3.0 kg m^(−2)h^(−1)outdoors under 0.5-1.0 sun,providing highly efficient evaporation under low light conditions.
基金Project supported by the National Natural Science Foundation of China(Grant No.12072317)the Natural Science Foundation of Zhejiang Province(Grant No.LZ21A020002)+2 种基金Ligang Sun gratefully acknowledges the support received from the Guangdong Basic and Applied Basic Research Foundation(Grant No.22022A1515011402)the Science,Technology and Innovation Commission of Shenzhen Municipality(Grant No.GXWD20231130102735001)Development and Reform Commission of Shenzhen(Grant No.XMHT20220103004).
文摘Molecular dynamics simulations are performed to investigate the mechanical behavior of nanotwinned NiCo-based alloys containing coherent L1_(2) nano-precipitates at different temperatures,as well as the interactions between the dislocations and nano-precipitates within the nanotwins.The simulation results demonstrate that both the yield stress and flow stress in the nanotwinned NiCo-based alloys with nano-precipitates decrease as the temperature rises,because the higher temperatures lead to the generation of more defects during yielding and lower dislocation density during plastic deformation.Moreover,the coherent L1_(2) phase exhibits excellent thermal stability,which enables the hinderance of dislocation motion at elevated temperatures via the wrapping and cutting mechanisms of dislocations.The synergistic effect of nanotwins and nano-precipitates results in more significant strengthening behavior in the nanotwinned NiCo-based alloys under high temperatures.In addition,the high-temperature mechanical behavior of nanotwinned NiCo-based alloys with nano-precipitates is sensitive to the size and volume fraction of the microstructures.These findings could be helpful for the design of nanotwins and nano-precipitates to improve the high-temperature mechanical properties of NiCo-based alloys.
基金supported by the National Natural Science Foundation of China(Grant No.51471025)
文摘There have been many interesting studies on high-entropy alloys（HEAs）, also known as multi-component（MC） alloys（MCAs）, in recent years. MC metallic-glasses（MGs） have shown the potential to express the advantages of MCAs and MGs in tandem. Amorphous phase formation rules are a crucial issue in the HEA and MCA field. For equal or near-equal atomic ratio alloys, mixed-entropy among the elements has a significant effect on the phase formation. This paper focuses on HEA amorphous phase formation rules. In the first two sections, the recent progress in amorphous phase formation in HEAs and MCAs is reviewed, including the effective factors and correlative parameters related to amorphous phase formation. In the third section, novel MCMGs including high-entropy（HE） bulk-metallic-glass（HE-BMG） and MCMG films developed in recent decades are summarized, and the giant-magnetic-impedance（GMI） effect of MC amorphous fibers is discussed.
文摘This work aimed to(i)understand conventional and pulse gas tungsten arc welding(GTAW)of AZ31B,and(ii)explore high frequency welding(100 Hz-1500 Hz).GTA welding with alternating current(AC)and direct current electrode positive(DCEP)polarities yielded crack-free partial penetration welds for6 mm thick AZ31B alloy sheet.Welding under direct current electrode negative(DCEN)polarity with identical parameters as that for AC and DCEP resulted in full penetration welds that had microcracks.Defect-free full-penetration welds could be accomplished with pulse GTA welding using DCEN polarity at a pulse frequency of 1 Hz with a pulse duration ratio of 1:1.The resultant DCEN P 1:1 weld metal had a microstructure finer than the conventional DCEN weld.Welds produced with pulse duration ratios of 1:2and 1:4 lacked penetration but had a much finer microstructures because of the lower heat input.The arc constriction by the high frequency pulsing in the Activ Arc■-High frequency(AA-HF)mode welding was responsible for deeper penetration.Welds produced under DCEN pulsing and AA-HF conditions had hardness higher than conventional DCEN,DCEP and AC GTA welds,attributed to the finer microstructure.AA-HF GTA welding produced defect free deeper penetration welds with good microstructural features/mechanical properties and also gave an advantage of 50%enhanced productivity when welded at1500 Hz.
基金the financial support received from the China Scholarship Council(CSC)MERAGEM graduate school and the Ministry of Science,Research and Arts of the State of Baden-Wu rttemberg for funding research+4 种基金the support of the German Research Foundation(DFG)project(SE 1407/4-2)the support of the En ABLES,a project funded by the European Union’s Horizon 2020 research and innovation program under grant agreement(730957)the support of Epi Store project under grant agreement(101017709)the Centre for Electrochemical Energy Storage Ulm-Karlsruhe(CELEST)the support from the Karlsruhe Nano Micro Facility(KNMF)。
文摘With the recent development of high entropy materials, an alternative approach to develop advanced functional materials with distinctive properties that show improved values compared to conventional materials has been provided. The high entropy concept was later successfully transferred to metal fluorides and high entropy fluorides(HEFs) were successfully synthesized. Owing to their high theoretical specific capacities in energy storage applications, HEFs were utilized as cathode materials for lithiumion batteries(LIBs) and their underlying storage mechanisms were investigated. Instead of a step-bystep reduction of each individual metal cation, the HEFs seem to exhibit a single-step reduction process,indicating a solid solution compound instead of merely a mixture of different metal fluorides. It was also observed that the electrochemical behavior of the HEFs depends on each individual incorporated element. Therefore, by altering the elemental composition, new materials that exhibit improved electrochemical properties can be designed. Remarkably, HEFs with seven incorporated metal elements exhibited a better cycling stability as well as a lower hysteresis compared to binary metal fluorides.These findings offer new guidelines for material design and tailoring towards high performance LIBs.
基金supported by the National Natural Science Foundation of China(21872040)the Hundred Talents Program of Guangxi Universitiesthe Excellent Scholars and Innovation Team of Guangxi Universities。
文摘Developing highly effective and stable non-noble metalbased bifunctional catalyst working at high current density is an urgent issue for water electrolysis(WE).Herein,we prepare the N-doped graphene-decorated NiCo alloy coupled with mesoporous NiCoMoO nano-sheet grown on 3D nickel foam(NiCo@C-NiCoMoO/NF)for water splitting.NiCo@C-NiCoMoO/NF exhibits outstanding activity with low overpotentials for hydrogen and oxygen evolution reaction(HER:39/266 mV;OER:260/390 mV)at±10 and±1000 mA cm^(−2).More importantly,in 6.0 M KOH solution at 60℃ for WE,it only requires 1.90 V to reach 1000 mA cm−2 and shows excellent stability for 43 h,exhibiting the potential for actual application.The good performance can be assigned to N-doped graphene-decorated NiCo alloy and mesoporous NiCoMoO nano-sheet,which not only increase the intrinsic activity and expose abundant catalytic activity sites,but also enhance its chemical and mechanical stability.This work thus could provide a promising material for industrial hydrogen production.
文摘Numerical analysis is critically important to understanding the complex deformation mechanics that occur during sheet forming processes.It has been widely used in simulation of sheet metal forming processes at room temperature in the automotive industry.However,material at elevated temperature behaves more differently than at room temperature and specific material parameters and models need to be developed for the simulation of warm forming.Based on the experimental investigation of material behavior of high strength aluminum alloy 7075(AA7075),constitutive equations with strain rate sensitivity at 140,180 and 220 ℃ are developed.Anisotropic yield criterion Barlat 89 is used in the simulation.Warm forming of limit dome height tests and limit drawing ratio tests of AA7075 at 140,180 and 220℃are performed.Forming limit diagrams developed from experiment at several elevated temperatures in the previous study are used to predict the failure in the simulation results.Punch force and displacement predicted from simulation are compared with the experimental data.Simulation results agree with experimental results,so the developed material model can be used to accurately predict material behavior during isothermal warm forming of the AA7075-T6 alloy.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 51271196,11274357,and 51021061)the Key Research Program of the Chinese Academy of Sciences+1 种基金the National Basic Research Program of China (Grant No. 2010CB833102)the Hi-Tech Research and Development Program of China (Grant No. 2011AA03A404)
文摘Our recent progress on magnetic entropy change（S） involving martensitic transition in both conventional and metamagnetic NiMn-based Heusler alloys is reviewed.For the conventional alloys,where both martensite and austenite exhibit ferromagnetic（FM） behavior but show different magnetic anisotropies,a positive S as large as 4.1 J·kg^-1·K^-1 under a field change of 0-0.9 T was first observed at martensitic transition temperature T M～197 K.Through adjusting the Ni：Mn：Ga ratio to affect valence electron concentration e/a,T M was successfully tuned to room temperature,and a large negative S was observed in a single crystal.The △S attained 18.0 J·kg^-1·K^-1 under a field change of 0-5 T.We also focused on the metamagnetic alloys that show mechanisms different from the conventional ones.It was found that post-annealing in suitable conditions or introducing interstitial H atoms can shift the T M across a wide temperature range while retaining the strong metamagnetic behavior,and hence,retaining large magnetocaloric effect（MCE） and magnetoresistance（MR）.The melt-spun technique can disorder atoms and make the ribbons display a B2 structure,but the metamagnetic behavior,as well as the MCE,becomes weak due to the enhanced saturated magnetization of martensites.We also studied the effect of Fe/Co co-doping in Ni 45（Co1-xFex）5 Mn36.6In13.4 metamagnetic alloys.Introduction of Fe atoms can assist the conversion of the Mn-Mn coupling from antiferromagnetic to ferromagnetic,thus maintaining the strong metamagnetic behavior and large MCE and MR.Furthermore,a small thermal hysteresis but significant magnetic hysteresis was observed around TM in Ni51Mn49-xInx metamagnetic systems,which must be related to different nucleation mechanisms of structural transition under different external perturbations.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11774088 and 11474090)。
文摘In high intensity focused ultrasound(HIFU)treatment,it is crucial to accurately identify denatured and normal biological tissues.In this paper,a novel method based on compressed sensing(CS)and refined composite multi-scale fuzzy entropy(RCMFE)is proposed.First,CS is used to denoise the HIFU echo signals.Then the multi-scale fuzzy entropy(MFE)and RCMFE of the denoised HIFU echo signals are calculated.This study analyzed 90 cases of HIFU echo signals,including 45 cases in normal status and 45 cases in denatured status,and the results show that although both MFE and RCMFE can be used to identify denatured tissues,the intra-class distance of RCMFE on each scale factor is smaller than MFE,and the inter-class distance is larger than MFE.Compared with MFE,RCMFE can calculate the complexity of the signal more accurately and improve the stability,compactness,and separability.When RCMFE is selected as the characteristic parameter,the RCMFE difference between denatured and normal biological tissues is more evident than that of MFE,which helps doctors evaluate the treatment effect more accurately.When the scale factor is selected as 16,the best distinguishing effect can be obtained.
基金supported by Liaoning BaiQianWan Talents Program of China (No. 2008921028)Doctoral Fund of Ministry of Education of China (No. 200801451082)
文摘In this study, compounded surface modification technology-high current pulsed electron beam （HCPEB） ＋ micro-plasma oxidation （MPO） was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of ZK60 Mg alloy after single MPO and HCPEB＋MPO compounded treatment were investigated by SEM. The results showed that the density of the ceramic layer of HCPEB＋MPO-treated ZK60 Mg alloy was improved and defects were reduced compared to that under MPO treatment alone. Surface modified layer of ZK60 Mg alloys treated by HCPEB＋MPO was divided into three zones, namely the top loose ceramic zone, middle compact zone and inside HCPEB-induced melted zone. Corrosion resistance of ZK60 Mg alloy before and after the compounded surface modification was measured in a solution of 3.5% NaCl by potentiodynamic polarization curves. It was found that the corrosion current density of ZK60 Mg alloys could be reduced by about three orders of magnitude, from 311μA/cm^2 of the original sample to 0.2μA/cm^2 of the HCPEB＋MPO-treated sample. This indicates the great application potential of the HCPEB＋MPO compounded surface modification technology in improving the corrosion resistance of ZK60 Mg alloys in the future.
基金the National Natural Science Foundation of China(Grant No.11872317)Science Challenge Project(Grant No.TZ2018001)the Fundamental Research Funds for the Central Universities(Grant No.3102019ZX001).
文摘By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band(ASB) at low compression strain, while bimodal alloy is considerably ASBresistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB.In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary a grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of a lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of a/β nanomultilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.
基金supported by the Natural Science Foundation of China(No.51675230)the Major Innovation Projects in Shandong Province (No. 2019JZZY010451)。
文摘Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse direction(TD)and normal direction(ND))were carried out at strain rates of 1000,2000 and 4000 s-1,respectively.From the microscopic point of view,the effect of strain rate and anisotropy on tension compression asymmetry of aviation aluminum alloy 7050 was studied by scanning electron microscope(SEM),metallographic microscope and electron backscatter diffraction(EBSD).The results showed that there was obvious asymmetry between tension and compression,especially that the yield strength of the material in tension was higher than that in compression.The asymmetry in the elastic stage of tension-compression was weaker and the asymmetry in the strengthening stage was stronger with the increase of strain rate.At the same strain rate,the changing trend of the flow stress was distinct under different orientations of tension and compression,which was related to the stress direction of the grains.According to EBSD grain orientation analysis and raw material texture pole figure analysis,it was found that the larger the difference in the degree of grain refinement during tension and compression,the larger the macro-flow stress difference.
基金financial supported by the Natural Science Foundation of Fujian,China(2021J01633).
文摘When a high impedance fault(HIF)occurs in a distribution network,the detection efficiency of traditional protection devices is strongly limited by the weak fault information.In this study,a method based on S-transform(ST)and average singular entropy(ASE)is proposed to identify HIFs.First,a wavelet packet transform(WPT)was applied to extract the feature frequency band.Thereafter,the ST was investigated in each half cycle.Afterwards,the obtained time-frequency matrix was denoised by singular value decomposition(SVD),followed by the calculation of the ASE index.Finally,an appropriate threshold was selected to detect the HIFs.The advantages of this method are the ability of fine band division,adaptive time-frequency transformation,and quantitative expression of signal complexity.The performance of the proposed method was verified by simulated and field data,and further analysis revealed that it could still achieve good results under different conditions.
基金supported by the funds of the National Natural Science Foundation of China (Nos. 11175194, 11875270, and U1832210)Youth Innovation Promotion Association CAS (No. 2018015)Guangdong Basic and Applied Basic Research Foundation (No.2019B1515120046)
文摘A waterproof nanocrystalline soft magnetic alloy core with a size of O.D.850 mm×I.D.316 mm×H.25 mm for radio frequency acceleration was successfully developed by winding 18μm 1k107b MA ribbons.Theμ'_(p)Qf products reached 7.5,10,and 12 GHz at 1,3,and 5 MHz,respectively.Theμ'_(p)Qf products of the MA core(O.D.250 mm×I.D.100 mm×H.25 mm)manufactured using a 13μm MA ribbon further increased by 30%.Detailed improvements on the MA core manufacture process are discussed herein.Continuous high-power tests on the new MA cores demonstrated its good performance of waterproofness,particularly its stability of highμ'_(p)Qf products.The MA core with highμ'pQf product and large size can operate under a high average RF power,high electric field,and in deionized water,which will be used in the China Spallation Neutron Source PhaseⅡ(CSNS-Ⅱ).
