Typhoons are becoming frequent and intense with ongoing climate change,threatening ecological security and healthy forest development in coastal areas.Eucalyptus of a predominant introduced species in southern China,f...Typhoons are becoming frequent and intense with ongoing climate change,threatening ecological security and healthy forest development in coastal areas.Eucalyptus of a predominant introduced species in southern China,faces significant growth challenges because of typhoon.Therefore,it is vital to investigate the variation of related traits and select superior breeding materials for genetic improvement.Variance,genetic parameter,and correlation analyses were carried out on wind damage indices and eight wood proper-ties in 88 families from 11 provenances of 10-year-old Euca-lyptus camaldulensis.The selection index equation was used for evaluating multiple traits and selecting superior prov-enances and family lines as future breeding material.The results show that all traits were highly significantly differ-ent at provenance and family levels,with the wind damage index having the highest coefficient of genetic variation.The heritability of each trait ranged from 0.48 to 0.87,with the wind damage index,lignin and hemicellulose contents,and microfibril angle having the highest heritabilities.The wind damage index had a positive genetic correlation with wood density,a negative correlation with lignin content,a negative phenotypic correlation and a negative genetic correlation with microfibril angle.Wind damage index and genetic progress in the selection of eight wood traits varied from 7.2%to 614.8%.Three provenances and 12 superior families were selected.The genetic gains of the wind damage index were 10.2%and 33.9%for provenances and families,and these may be starting material for genetic modification for wind resistance in eucalyptus and for their dissemination to typhoon-prone coastal areas of southern China.展开更多
Totally 26 provenance stands of 17-year-old Korean pine were selected for investigating wood properties and growth characters in Mao抏rshan Experimental Forest Farm of Northeast Forestry University in 1999. The anatom...Totally 26 provenance stands of 17-year-old Korean pine were selected for investigating wood properties and growth characters in Mao抏rshan Experimental Forest Farm of Northeast Forestry University in 1999. The anatomical property indexes, including tracheid length, tracheid diameter and wall-indiameter ratio, and the physical property indexes, such as growth ring width, late wood percentage and growth ring density, were measured for wood properties. Growth character indexes, including tree height and diameter at breast height, were also measured. The analytical results showed that there exited obviously dif-ference in wood property indexes between different provenances, which is suggested that wood properties are controlled by their genetic differences. The growth character indexes of Korean pines presented significant difference and they might also be controlled by their genetic differences. Most parameters of wood properties mainly varied in the direction of longitude, but the parameters of growth characters varied in the direction of latitude.展开更多
Inter Simple Sequence Repeat （ISSR） was used to detect genetic variation among nine provenances, including 135 individuals. A total of 108 loci were amplified using 10 random primers. The differentiation of the perc...Inter Simple Sequence Repeat （ISSR） was used to detect genetic variation among nine provenances, including 135 individuals. A total of 108 loci were amplified using 10 random primers. The differentiation of the percentage of polymorphic bands （PPB） among different provenances was evident, ranging from 27% to 54%. of which Honghuaerji provenance had the highest PPB and Kalunshan provenance had the lowest PPB. Shannon＇s Information index （1） at species level was 0.1581 and Nei＇s gene diversity （h） was 0.2393. Coefficient of gene differentiation （Gsr） calculated by Popgene was 0.3965, these results indicated that majority of genetic variation （60.35%） was found within provenances. According to dendrogram among pinus sylvestriv provenances, nine provenances were divided into two provenance areas. namely Daxing＇an and Xiaoxing＇an Mountains provenance area and Hulunbeier provenance area.展开更多
To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid t...To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid traits by earlywood （EW） and latewood （LW）： tracheid length （TL）, double wall thickness （WT）, radial lumen diameter （R_D1）, tangential lumen diameter （T_D1）, radial central diameter （R_D2）, and tangential central diameter （T_D2）. We also studied the relationship with the following growth traits： diameter at breast height （DBH）, height （H）, crown breadth south-north axis （NSC）, crown breadth east-west axis （EWC）, ring width （RW）, latewood percentage （LWP）, and wood density （WD）. All sample materials were collected from a 33-year old clonal seed orchard of Pinus tabuliformis Carr. Genetic variation among clones was moderate for all tracheid traits, 9.49-26.03%. Clones significantly affected WT, R_D1, R_D2, T_D1, T_D2, and the two ratios WT/R_D1 and TL/T_D2 in EW but had no effects in LW. Clones significantly affected TL in LW but had no effects in EW. H2/C was higher in LW （0.50） than in EW （0.20） for TL, while H 2/C was higher in EW （0.27-0.46） for other tracheid traits and the two ratios （TL/T_D2 and WT/R_D1） than in EW （0.06-0.22）. WD and TL were significantly positively correlated, but WT and TL were negatively correlated both at individual and clone levels; all tracheid diameters and the four ratio values （EW_WT/ R_D1, LW WT/R_D1, EW_TL/T_D2 and LW_TL/ T_D2）, were strongly positively correlated with DBH, H, NSC, WEC and RW, and strongly negatively correlated with WD both at individual and clone levels. The most important variables for predicting WD were LW_TL, EW_WT and R_D1 in both EW and LW （r2= 0.22）. Selecting the top 10% of the clones by DBH would improve DBH growth by 12.19% （wood density was reduced by 0.14%） and produced similar responses between EW and LW for all tracheid traits： a reduction of 0.94 and 3.69% in tracheid length and increases in tracheid diameters （from 0.36 to 5.24%） and double wall thickness （0.07 and 0.87%）. The two ratios WT/R_D1 and TL/T_D2 across tissues （EW and LW） declined 0.59 and 4.56%, respectively. The decreased tracheid length and the ratio between tracheid length and diameter is disadvantageous for pulp production. The unfavorable relationship of tracheid traits with wood density indicate that multiple trait selection using optimal economic weights and optimal breeding strategies are recommended for the current longterm breeding program for P. tabuliformis.展开更多
Hyphantria cunea （Drury） is a severe invasive pest in Beijing. It is important to understand the reason for its successful invasion and outbreak. Accordingly, this study was tailored to assess molecular variation an...Hyphantria cunea （Drury） is a severe invasive pest in Beijing. It is important to understand the reason for its successful invasion and outbreak. Accordingly, this study was tailored to assess molecular variation and genetic relationships among three H. cunea populations in Beijing and one population from Sanhe in Hebei Province as control （totally 100 individuals）. A silver-labeled amplified fragment length polymorphisms （AFLP） DNA profiling method was used to detect the genetic diversity and relationship among the populations. Five EcoRI and MseI primer combinations produced a total of 171 （91.2% polymorphic） informative fragments. The average Nei＇s genetic diversity in four H. cunea populations analyzed by Popgene3.2 software was 0.2287, and the level of genetic diversity ranked in the order BDR （reared population in Daxing, Beijing） 〉 BDN （natural population in Daxing, Beijing） 〉 HSN （natural population in Sanhe, Hebei Province） 〉 BFN （natural population in Fengtai, Beijing）. The value of genetic differentia- tion among populations was 0.3321, and the gene flow was 1.0057. The genetic distance between these populations ranged from 0.0735 to 0.3309, 0.0531 on average. The result of UPGMA （unweighed pair group method with arithmetic averages） clustering showed that populations BFN and HSN were closely related, while BFN and BDN had the largest genetic distance. These results indicate that H. cunea populations in Beijing might originate from several areas.展开更多
Larix olgensis,one of the most important timber species in northeastern China,is used for paper making and construction.In this study,10 wood properties(wood density,fiber length,fiber width,fiber length-to width rati...Larix olgensis,one of the most important timber species in northeastern China,is used for paper making and construction.In this study,10 wood properties(wood density,fiber length,fiber width,fiber length-to width ratio,hemicellulose content,cellulose content,holocellulose content,lignin content,ash content,and carbon content)of 10 provenances of L.olgensis planted at sites of CuoHai(CH),JiaGeDaQi(JGDQ),LiangShui(LS),and Mao'erShan(MES)were analyzed.The results of ANOVA showed that almost traits differed significantly among locations and provenances,with a significant interaction effect.Each trait also differed significant among provenances within sites.The phenotypic and genetic coefficient of variation(PCV and GCV)and provenance heritability(H 2)for wood properties ranged from 1.122 to 27.365%,from 0.564%to 21.113%and from 0.332 to 0.996,respectively.A correlation analysis showed that wood density was significantly negatively correlated with cellulose content and holocellulose content at sites CH,JGDQ,and LS,but were significantly positively correlated at site MES.Wood density was significantly negatively correlated with lignin content at CH and JGDQ,but not at LS and MES.Fiber width(FW)was negatively correlated with the ratio of fiber length(FL)to width across sites,and FW and FL/W were all positively correlated with FL.Lignin content was significantly positively correlated with hemicellulose content at site JGDQ and significantly negatively correlated with cellulose content and with holocellulose content at site MES.Interestingly,carbon content was positively correlated with cellulose content and holocellulose content at CH,but negatively correlated with these two traits at site MES.In a correlation analysis of wood properties with geographic,soil and climatic characteristics at the four sites,wood properties were mainly correlated with latitude and altitude of the site and affected by the average annual precipitation and temperature simultaneously.To select superior pulpwood provenances and high carbon storage provenances,we selected the two best provenances with excellent wood properties for each location based on a multi-trait comprehensive evaluation,which can be used as the preferred materials for the establishment of large-scale plantations in specific locations.展开更多
The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood...The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood density and some mechanical properties. The results showed that significant or extremely significant difference in air dried wood density and the mechanical properties existed among the clones, this means these wood properties were under moderate or strong genetic controls and could be improved by genetic manipulations. The radial and vertical variation patterns of air dried wood density were also studied and the results were found to coordinate with other previous research results. The vertical variation patterns of most mechanical properties within the individual tree also conformed to the general wood theories except the modulus of elasticity and cross section hardness. Among the mechanical properties, modulus of elasticity (MOE) and tangent section hardness were under strong genetic control, with the clonal repeatabilities being 0 90 and 0 80, respectively. However, the clonal repeatabilities of other mechanical properties under study were a little lower than above two indexes. Genetic correlation analysis indicated that super clonal selection and breeding for veneer timber could be realized through indirect selection of wood density and form indexes.展开更多
Understanding genetic variation is important for efficiently selecting excellent clones and utilizing genetic resources during tree breeding. We investigated 16 growth traits of 50 32-year-old Pinus koraiensis clones....Understanding genetic variation is important for efficiently selecting excellent clones and utilizing genetic resources during tree breeding. We investigated 16 growth traits of 50 32-year-old Pinus koraiensis clones. Analyses of variance showed that all the test traits differed significantly among clones. Average height, diameter at breast height(DBH), and volume of all clones were 10.41 m, 21.30 cm,and 0.148 m3, respectively. Phenotypic coefficients of variation and repeatabilities of traits ranged from 4.37 to48.03% and from 0.013 to 0.900, respectively. There exists significant positive correlations among heights, diameter at different heights(1.3, 3.0, 5.0 m), and volumes; genetic correlation was close to phenotype correlation. Using four growth traits(height, DBH, volume, average crown width)as indices for a comprehensive evaluation, five clones(PK11, PK 19, PK 04, PK 14, and PK 28), whose traits scored in the top 10%, were selected as elite clones. For these clones,genetic gains in height, DBH, volume and crown height were 8.58, 13.02, 32.72 and 3.83%, respectively. These results provide important information for improving P.koraiensis breeding programs.展开更多
The growth traits (tree height, diameter at breast height, and stem straightness degree) and wood properties [wood density (WD), fiber length, fiber width, ash content (AC), lignin content, cellulose content, hemicell...The growth traits (tree height, diameter at breast height, and stem straightness degree) and wood properties [wood density (WD), fiber length, fiber width, ash content (AC), lignin content, cellulose content, hemicellulose content (HEC), and holocellulose content] of 208 26-year-old Larix olgensis clones were analyzed. Except for WD and AC, there were significant differences (p < 0.01) for all traits among clones. The phenotypic coefficient of variation and repeatability of all traits were 9.34-35.33% and 0.218-0.930, respectively. Tree height and diameter at breast height showed significant positive correlation; however, the correlation coefficients among growth characteristics and wood properties were mostly not significant. Ten clones (L70, L56, L82, L90, L59, L91, L61, L92, L86, and L64) were selected as excellent clones under a selection rate of 5%, using tree height, diameter at breast height, and stem straightness degree as evaluation indexes, providing genetic gains of 28.69, 17.96, and 0.67%, respectively. Ten clones (L88, L305, L59, L66, L253, L304, L277, L298, L248, and L293) were selected as excellent clones using wood properties as an evaluation index, with a selection rate of 5%, providing genetic gains in WD, fiber length, fiber width, cellulose content, and HEC of 4.14, 3.64, 9.28, 6.77, and 9.61%, respectively. This study provides a theoretical basis for selecting excellent L. olgensis clones.展开更多
We investigated phenotypic variation ofPopulus simonii from five provenances in northern China. Our results show that significant differences exist between plants of different provenances in morphological and physiolo...We investigated phenotypic variation ofPopulus simonii from five provenances in northern China. Our results show that significant differences exist between plants of different provenances in morphological and physiological traits, except for leaf-stalk length and the number of leaf margins. The coefficient of variation for all traits ranges from 14.77% to 81.49%. The mean phenotypic coefficient of differentiation （VST） is 47.1%, which means that the variation within provenances is the major source for phenotypic variation in P. simonii. Given our cluster analysis of provenances based on an average linkage computing method, the five provenances ofP. simonii investigated could be divided into three groups. Our results provide a theoretical basis for genetic resource conservation and provenance selection of natural P. simonii in northern China.展开更多
The growth performance of twenty poplar （Populus deltoides Bartr.） clones, planted in the central-plain region of Punjab in north-western India, was evaluated using a randomized block design with three replications ...The growth performance of twenty poplar （Populus deltoides Bartr.） clones, planted in the central-plain region of Punjab in north-western India, was evaluated using a randomized block design with three replications and plot size of four plants. Significant differences among clones were observed for diameter at breast height （DBH）, height and volume per tree at age five, six and eight years. Clone L-48/89 recorded significantly superior volume than the control （G-48） at all ages, with superiority of 51.4, 43.9 and 48.5 per cent at age five, six and eight years, respectively. The phenotypic and genotypic coefficients of variation were the highest for volume （26.55-34.66% and 15.84-26.00%） and the minimum for tree height （8.43-12.13% and 4.71-7.59%）. The broad sense heritability was relatively higher for DBH （0.42-0.55） and genetic advance as per cent of mean was highest for volume （19.48-40.18）. All genetic parameters increased with age. All traits showed significant positive correlation with each other.展开更多
Electrical impedance （El） and phase angle （PHI） parameters in AC impedance spectroscopy are important electrical parameters in the study of medical pathology. However, little is known about their application in va...Electrical impedance （El） and phase angle （PHI） parameters in AC impedance spectroscopy are important electrical parameters in the study of medical pathology. However, little is known about their application in variation and genetic relationship studies of forest trees. In order to test whether impedance parameters could be used in genetic relationship analysis among conifer species, E1 and PHI were measured in a seedling experiment test composed of Pinus tabuliformis, Pinus yunnanensis, and Pinus densata in a habitat of Pinus tabuliformis. The results showed that variations in both EI and PHI among species were sig- nificant in different electric frequencies, and the EI and PHI values measured in the two populations of P. densata were between the two parental species, P. yunnanensis and P. tabuliformis. These results show that these two impedance parameters could reflect the genetic relationship among pine species. This was the first time using the two AC impedance spectroscopy parameters to test the genetic relationship analysis between tree species, and would be a hopeful novelreference methodology for future studies in evolution and genetic variation of tree species.展开更多
Plant phenotypes are infl uenced by genetic and environmental factors.In this study,the growth traits of 43 one-year-old poplar clones grown at diff erent sites in northeast China(Dongling State-owned Forest Protectio...Plant phenotypes are infl uenced by genetic and environmental factors.In this study,the growth traits of 43 one-year-old poplar clones grown at diff erent sites in northeast China(Dongling State-owned Forest Protection Center,DL;Baicheng State-owned forest farm,BC;and Cuohai Forest farm,CH)were evaluated and analyzed across clones and sites.Results show signifi cant diff erences in height and base diameter among sites and clones.Phenotypic and genetic variation coeffi cients ranged from 49.59%(BC)to 58.39%(DL)and from 49.33%(BC)to 58.06%(DL),respectively.Additive main eff ects and multiplicative interaction(AMMI)analysis showed that the eff ects of genotype,environment,and genotype×environment interaction were signifi cantly diff erent.Genetic variation was the main source of variation,accounting for 48.6%.AMMI biplot showed that clone 30 had high and stable yields at the three sites.From an evaluation of multiple traits and GGE biplot that clone 2,clone 30 and clone 25 had higher yield than the other clones at DL,CH and BC,respectively.These clones will provide material for forest regeneration in northeast China.展开更多
Patterns of variation in the chemical composition of wood, i.e., holocellulose, cellulose and lignin contents and 1% NaOH extractives were studied in 12 natural populations of Pinus manssoniana Lamb. in Guizhou Provin...Patterns of variation in the chemical composition of wood, i.e., holocellulose, cellulose and lignin contents and 1% NaOH extractives were studied in 12 natural populations of Pinus manssoniana Lamb. in Guizhou Province, China, using wood cores as experiment material. The results show statistically significant differences among provenances in holocellulose, cellulose and 1% NaOH extractive contents. The largest coefficient of variation among the provenances was found in the 1% NaOH extractive content and the smallest in the holocellulose content. Variation of lignin content occurred within provenances. Correlations between chemi- cal compositions of wood and factors of local geography and meteorology were largely insignificant. The chemical composition of wood presented patterns of random variation. The correlation of 1% NaOH extractive content with holocellulose content was sig- nificant （r = -0.68）. There was also significantly negative correlation （r = -0.62） between cellulose and lignin content. On the basis of a UPGMA cluster analysis, we identified three provenances of masson pine among the 12 studied, i.e., those of Wengan, Tongzi and Luodian with high cellulose contents, low levels of 1% NaOH extractive and moderate lignin contents, which we recommend as promising provenances for growing of pulp wood and the manufacture of paper in Guizhou Province.展开更多
Picea spp.are a prominent component of the boreal,montane,and sub-alpine forests in the Northern Hemisphere,and have substantial economic importance due to their high quality fibre.However,performance and wood propert...Picea spp.are a prominent component of the boreal,montane,and sub-alpine forests in the Northern Hemisphere,and have substantial economic importance due to their high quality fibre.However,performance and wood properties of the genus have not been systematically evaluated in China.This study aimed to examine genetic variations in growth traits,phenology,and wood properties of 17 Picea species,(three from North America,two from Europe,and 12 from China),in response to specific climate factors using a randomized complete block design in a monsoonal,middle latitude area of China.Results show that all growth traits and wood properties significantly varied among species(P <0.00).Of the 17 species examined,P.abies and P.pungens were the tallest with heights of 2.5 and 1.9 m at 9 years old,respectively,90% and 50% greater than the average heights.Branch length,number,and angles of both P.abies and P.pungens were greater than those of the other species.Heights of P.glauca and P.omorika were20-33% greater than the average.Fast-growing species had high quantities of first lateral branches and large top whorl branch lengths.The taller species exhibited greater tracheid lengths and average tracheid lengths to radial central diameter ratios(TL/R_D2),but smaller cell wall thicknesses to tracheid radial lumen diameter ratios(WT/R_D1),which is favorable for pulp production.Correlation analysis revealed that height and ring width had significant positive correlations with latitude but strongly negative correlations with longitude.Height was positively correlated with average annual rainfalls,but negative correlations with average yearly sunshine.Due to the increased average annual sunshine at the China test site relative to the seed source,species such as P.abies,P.pungens,P.glauca,and P.omorika from wet,humid areas performed better than native species.Considering similar temperatures,precipitation may be the main factor affecting growth,which is beneficial for predicting the extent of spruce expansion.These results should encourage further testing and provide reference information for future exotic species studies in this part of China.展开更多
In order to compare the contemporary and genetic variation effect on Arabidop-sis thaliana treated with N+ implantation and 7-ray radiation, the authors did some statistical comparison on the germinating rate and the ...In order to compare the contemporary and genetic variation effect on Arabidop-sis thaliana treated with N+ implantation and 7-ray radiation, the authors did some statistical comparison on the germinating rate and the development period, and analyzed the content of soluble proteins, the activity of some enzymes, isoenzymes profile, and along with the variation in genome DNA of two generations by RAPD. With N+ implantation there was an analogical 'saddle model' relationship between doses and the plant development, soluble proteins, the activity of some enzymes and isoenzymes profile. A certain connection might exist between the similar dose-effect relations among enzymes activity, isoenzymes profile and content of soluble proteins. Maybe, there also exists a certain connection between the mutants of development period and that of DNA variations, between the hereditability of the effect of N+ implantation on the isoenzymes, the activities of enzymes and the hereditability of DNA variations. So it is presumed that the implanted ions, maybe, have participated in metabolism process of organism including that of genome DNA, to consequently affect vital process, such as the changes of gene structure, gene expression manner and gene repair mechanism, and finally result in mutation on phenotype and molecular level. Furthermore, the results definitely showed that mutagenic mechanism induced by N+ implantation is very complicated and is much different from that induced by traditional 7-ray radiation.展开更多
Ion implantation, as a new biophysically mutagenic technique, has shown a great potential for crop breeding. By analyzing polymorphisms of genomic DNA through RAPD-based DNA analysis, we compared the frequency and eff...Ion implantation, as a new biophysically mutagenic technique, has shown a great potential for crop breeding. By analyzing polymorphisms of genomic DNA through RAPD-based DNA analysis, we compared the frequency and efficiency of somatic and germ-line mutations of Arabidopsis thaliana treated with N^＋ ion implantation and γ-rays radiation. Our data support the following conclusions： （1） N^＋ ion implantation can induce a much wider spectrum of mutations than γ-rays radiation does; （2） Unlike the linear correlation between the doses and their effect in γ-rays radiation, the dose-effect correlation in N^＋ ion implantation is nonlinear; （3） Like γ-rays radiation, both somatic and germ-line mutations could be induced by N^＋ ion implantation; and （4） RAPD deletion patterns are usually seen in N^＋ ion implantation induced mutation.展开更多
Bud flushing is very important for the survival and growth of trees, a phenomenon matched each year with the annual course of temperature and the timing of bud flushing in the spring. Essentially it represents a serio...Bud flushing is very important for the survival and growth of trees, a phenomenon matched each year with the annual course of temperature and the timing of bud flushing in the spring. Essentially it represents a serious ecological and evolutionary tradeoff between survival and growth. The most suitable timing of bud burst permits trees to begin growth sufficiently early to take advantage of favorable spring conditions, but late enough to decrease the risks of tissue damage from late frost. In the present study bud burst spring phenology of poplar （Populus tremula and P. tremuloides） from eight different provenances, originating from Eu- rope and the USA, was observed during March and April, 2009. The experimental plot was located at Solling, Germany （51~44＇0＂ N, 9036＇0＇＇ E）. A six stage subjective scoring system of bud burst phenology was used to identify the phenological stages of the seed- lings, where each plant was observed twice a week. The aim of the study was to predict phenotypic variation in poplar, originating from regions between 42~ and 60~ N latitude, growing in similar environments. Timing of bud flushing of poplar was recorded. It was found that seedlings of provenance 3, which originated from 42.35~ N latitude, started and completed flushing significantly earlier than those of other provenances, while seedlings of provenance 5, originating from 54.29~ N latitude, started flushing very late and only a few plants reached top scoring at the end of the experimental period. Analysis of variance showed statistically highly signifi- cant differences （p 〈 0.05） in bud flushing among the provenances. The correlation between scoring and flushing periods was very strong within provenances although the flushing pattern differed among provenances （origin of the planted seedlings）. Bud flushing showed a negative correlation with the origin of the planted seedlings. Given the field experience gained with this experiment, it is recommended that seedlings from provenances 5 and 8 could be used for future plantations where late frost may be a problem for the young shoots of seedlings.展开更多
基金supported by the National Natural Science Foundation of China(Grant Number 32201527)National Key R&D Program of China(Grant No.2023YFD2201004).
文摘Typhoons are becoming frequent and intense with ongoing climate change,threatening ecological security and healthy forest development in coastal areas.Eucalyptus of a predominant introduced species in southern China,faces significant growth challenges because of typhoon.Therefore,it is vital to investigate the variation of related traits and select superior breeding materials for genetic improvement.Variance,genetic parameter,and correlation analyses were carried out on wind damage indices and eight wood proper-ties in 88 families from 11 provenances of 10-year-old Euca-lyptus camaldulensis.The selection index equation was used for evaluating multiple traits and selecting superior prov-enances and family lines as future breeding material.The results show that all traits were highly significantly differ-ent at provenance and family levels,with the wind damage index having the highest coefficient of genetic variation.The heritability of each trait ranged from 0.48 to 0.87,with the wind damage index,lignin and hemicellulose contents,and microfibril angle having the highest heritabilities.The wind damage index had a positive genetic correlation with wood density,a negative correlation with lignin content,a negative phenotypic correlation and a negative genetic correlation with microfibril angle.Wind damage index and genetic progress in the selection of eight wood traits varied from 7.2%to 614.8%.Three provenances and 12 superior families were selected.The genetic gains of the wind damage index were 10.2%and 33.9%for provenances and families,and these may be starting material for genetic modification for wind resistance in eucalyptus and for their dissemination to typhoon-prone coastal areas of southern China.
文摘Totally 26 provenance stands of 17-year-old Korean pine were selected for investigating wood properties and growth characters in Mao抏rshan Experimental Forest Farm of Northeast Forestry University in 1999. The anatomical property indexes, including tracheid length, tracheid diameter and wall-indiameter ratio, and the physical property indexes, such as growth ring width, late wood percentage and growth ring density, were measured for wood properties. Growth character indexes, including tree height and diameter at breast height, were also measured. The analytical results showed that there exited obviously dif-ference in wood property indexes between different provenances, which is suggested that wood properties are controlled by their genetic differences. The growth character indexes of Korean pines presented significant difference and they might also be controlled by their genetic differences. Most parameters of wood properties mainly varied in the direction of longitude, but the parameters of growth characters varied in the direction of latitude.
基金This study was supported by National Scientific and Technological Brainstorm Project.
文摘Inter Simple Sequence Repeat （ISSR） was used to detect genetic variation among nine provenances, including 135 individuals. A total of 108 loci were amplified using 10 random primers. The differentiation of the percentage of polymorphic bands （PPB） among different provenances was evident, ranging from 27% to 54%. of which Honghuaerji provenance had the highest PPB and Kalunshan provenance had the lowest PPB. Shannon＇s Information index （1） at species level was 0.1581 and Nei＇s gene diversity （h） was 0.2393. Coefficient of gene differentiation （Gsr） calculated by Popgene was 0.3965, these results indicated that majority of genetic variation （60.35%） was found within provenances. According to dendrogram among pinus sylvestriv provenances, nine provenances were divided into two provenance areas. namely Daxing＇an and Xiaoxing＇an Mountains provenance area and Hulunbeier provenance area.
基金supported by “Open Fund of State Key Laboratory of Tree Genetics and Breeding(Chinese Academy of Forestry)(Grant No.TGB2016001)”“The Lecture and Study Program for Outstanding Scholars from Home and Abroad(Grant No.CAFYBB2011007)”“Continuation project of National Natural Science Foundation of China(Grant No.CAFNSFC201601)”
文摘To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid traits by earlywood （EW） and latewood （LW）： tracheid length （TL）, double wall thickness （WT）, radial lumen diameter （R_D1）, tangential lumen diameter （T_D1）, radial central diameter （R_D2）, and tangential central diameter （T_D2）. We also studied the relationship with the following growth traits： diameter at breast height （DBH）, height （H）, crown breadth south-north axis （NSC）, crown breadth east-west axis （EWC）, ring width （RW）, latewood percentage （LWP）, and wood density （WD）. All sample materials were collected from a 33-year old clonal seed orchard of Pinus tabuliformis Carr. Genetic variation among clones was moderate for all tracheid traits, 9.49-26.03%. Clones significantly affected WT, R_D1, R_D2, T_D1, T_D2, and the two ratios WT/R_D1 and TL/T_D2 in EW but had no effects in LW. Clones significantly affected TL in LW but had no effects in EW. H2/C was higher in LW （0.50） than in EW （0.20） for TL, while H 2/C was higher in EW （0.27-0.46） for other tracheid traits and the two ratios （TL/T_D2 and WT/R_D1） than in EW （0.06-0.22）. WD and TL were significantly positively correlated, but WT and TL were negatively correlated both at individual and clone levels; all tracheid diameters and the four ratio values （EW_WT/ R_D1, LW WT/R_D1, EW_TL/T_D2 and LW_TL/ T_D2）, were strongly positively correlated with DBH, H, NSC, WEC and RW, and strongly negatively correlated with WD both at individual and clone levels. The most important variables for predicting WD were LW_TL, EW_WT and R_D1 in both EW and LW （r2= 0.22）. Selecting the top 10% of the clones by DBH would improve DBH growth by 12.19% （wood density was reduced by 0.14%） and produced similar responses between EW and LW for all tracheid traits： a reduction of 0.94 and 3.69% in tracheid length and increases in tracheid diameters （from 0.36 to 5.24%） and double wall thickness （0.07 and 0.87%）. The two ratios WT/R_D1 and TL/T_D2 across tissues （EW and LW） declined 0.59 and 4.56%, respectively. The decreased tracheid length and the ratio between tracheid length and diameter is disadvantageous for pulp production. The unfavorable relationship of tracheid traits with wood density indicate that multiple trait selection using optimal economic weights and optimal breeding strategies are recommended for the current longterm breeding program for P. tabuliformis.
基金funded by the Beijing Municipal Education Commission Research Base,National Natural ScienceTechnology Support Plan of China "The Technology Research and Demonstration of Forestry-Paper Integration Project" (2006BAD32B)Program for Changjiang Scholars Innovative Research Team in Universities (PCSIRT0607)
文摘Hyphantria cunea （Drury） is a severe invasive pest in Beijing. It is important to understand the reason for its successful invasion and outbreak. Accordingly, this study was tailored to assess molecular variation and genetic relationships among three H. cunea populations in Beijing and one population from Sanhe in Hebei Province as control （totally 100 individuals）. A silver-labeled amplified fragment length polymorphisms （AFLP） DNA profiling method was used to detect the genetic diversity and relationship among the populations. Five EcoRI and MseI primer combinations produced a total of 171 （91.2% polymorphic） informative fragments. The average Nei＇s genetic diversity in four H. cunea populations analyzed by Popgene3.2 software was 0.2287, and the level of genetic diversity ranked in the order BDR （reared population in Daxing, Beijing） 〉 BDN （natural population in Daxing, Beijing） 〉 HSN （natural population in Sanhe, Hebei Province） 〉 BFN （natural population in Fengtai, Beijing）. The value of genetic differentia- tion among populations was 0.3321, and the gene flow was 1.0057. The genetic distance between these populations ranged from 0.0735 to 0.3309, 0.0531 on average. The result of UPGMA （unweighed pair group method with arithmetic averages） clustering showed that populations BFN and HSN were closely related, while BFN and BDN had the largest genetic distance. These results indicate that H. cunea populations in Beijing might originate from several areas.
基金supported by the the Fundamental Research Funds for the Central Universities(No.2572018BW01)。
文摘Larix olgensis,one of the most important timber species in northeastern China,is used for paper making and construction.In this study,10 wood properties(wood density,fiber length,fiber width,fiber length-to width ratio,hemicellulose content,cellulose content,holocellulose content,lignin content,ash content,and carbon content)of 10 provenances of L.olgensis planted at sites of CuoHai(CH),JiaGeDaQi(JGDQ),LiangShui(LS),and Mao'erShan(MES)were analyzed.The results of ANOVA showed that almost traits differed significantly among locations and provenances,with a significant interaction effect.Each trait also differed significant among provenances within sites.The phenotypic and genetic coefficient of variation(PCV and GCV)and provenance heritability(H 2)for wood properties ranged from 1.122 to 27.365%,from 0.564%to 21.113%and from 0.332 to 0.996,respectively.A correlation analysis showed that wood density was significantly negatively correlated with cellulose content and holocellulose content at sites CH,JGDQ,and LS,but were significantly positively correlated at site MES.Wood density was significantly negatively correlated with lignin content at CH and JGDQ,but not at LS and MES.Fiber width(FW)was negatively correlated with the ratio of fiber length(FL)to width across sites,and FW and FL/W were all positively correlated with FL.Lignin content was significantly positively correlated with hemicellulose content at site JGDQ and significantly negatively correlated with cellulose content and with holocellulose content at site MES.Interestingly,carbon content was positively correlated with cellulose content and holocellulose content at CH,but negatively correlated with these two traits at site MES.In a correlation analysis of wood properties with geographic,soil and climatic characteristics at the four sites,wood properties were mainly correlated with latitude and altitude of the site and affected by the average annual precipitation and temperature simultaneously.To select superior pulpwood provenances and high carbon storage provenances,we selected the two best provenances with excellent wood properties for each location based on a multi-trait comprehensive evaluation,which can be used as the preferred materials for the establishment of large-scale plantations in specific locations.
文摘The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood density and some mechanical properties. The results showed that significant or extremely significant difference in air dried wood density and the mechanical properties existed among the clones, this means these wood properties were under moderate or strong genetic controls and could be improved by genetic manipulations. The radial and vertical variation patterns of air dried wood density were also studied and the results were found to coordinate with other previous research results. The vertical variation patterns of most mechanical properties within the individual tree also conformed to the general wood theories except the modulus of elasticity and cross section hardness. Among the mechanical properties, modulus of elasticity (MOE) and tangent section hardness were under strong genetic control, with the clonal repeatabilities being 0 90 and 0 80, respectively. However, the clonal repeatabilities of other mechanical properties under study were a little lower than above two indexes. Genetic correlation analysis indicated that super clonal selection and breeding for veneer timber could be realized through indirect selection of wood density and form indexes.
基金financially supported by the Innovation Project of State Key Laboratory of Tree Genetics and Breeding(Northeast Forestry University)(No.C02)the Fundamental Research Funds for the Central Universities(2572015EA03)+1 种基金China Postdoctoral Science Foundation(2014M561315)the National Natural Science Fund(31500549)
文摘Understanding genetic variation is important for efficiently selecting excellent clones and utilizing genetic resources during tree breeding. We investigated 16 growth traits of 50 32-year-old Pinus koraiensis clones. Analyses of variance showed that all the test traits differed significantly among clones. Average height, diameter at breast height(DBH), and volume of all clones were 10.41 m, 21.30 cm,and 0.148 m3, respectively. Phenotypic coefficients of variation and repeatabilities of traits ranged from 4.37 to48.03% and from 0.013 to 0.900, respectively. There exists significant positive correlations among heights, diameter at different heights(1.3, 3.0, 5.0 m), and volumes; genetic correlation was close to phenotype correlation. Using four growth traits(height, DBH, volume, average crown width)as indices for a comprehensive evaluation, five clones(PK11, PK 19, PK 04, PK 14, and PK 28), whose traits scored in the top 10%, were selected as elite clones. For these clones,genetic gains in height, DBH, volume and crown height were 8.58, 13.02, 32.72 and 3.83%, respectively. These results provide important information for improving P.koraiensis breeding programs.
基金financially supported by the National Science and Technology Program of China during the Twelfth FiveYear Plan Period(Grant No.2013AA102704)the Fundamental Research Funds for the Central Universities(Grant No.2572015EA03)
文摘The growth traits (tree height, diameter at breast height, and stem straightness degree) and wood properties [wood density (WD), fiber length, fiber width, ash content (AC), lignin content, cellulose content, hemicellulose content (HEC), and holocellulose content] of 208 26-year-old Larix olgensis clones were analyzed. Except for WD and AC, there were significant differences (p < 0.01) for all traits among clones. The phenotypic coefficient of variation and repeatability of all traits were 9.34-35.33% and 0.218-0.930, respectively. Tree height and diameter at breast height showed significant positive correlation; however, the correlation coefficients among growth characteristics and wood properties were mostly not significant. Ten clones (L70, L56, L82, L90, L59, L91, L61, L92, L86, and L64) were selected as excellent clones under a selection rate of 5%, using tree height, diameter at breast height, and stem straightness degree as evaluation indexes, providing genetic gains of 28.69, 17.96, and 0.67%, respectively. Ten clones (L88, L305, L59, L66, L253, L304, L277, L298, L248, and L293) were selected as excellent clones using wood properties as an evaluation index, with a selection rate of 5%, providing genetic gains in WD, fiber length, fiber width, cellulose content, and HEC of 4.14, 3.64, 9.28, 6.77, and 9.61%, respectively. This study provides a theoretical basis for selecting excellent L. olgensis clones.
基金supported by grants from the Changjiang Scholars Program of the Ministry of Education of China (Prof. Bailian Li)the National Natural Science Foundation of China (Grant Nos. 30600479,30872042)+3 种基金the Major Science Foundation of the Ministry of Education of China (Grant No. 307006)the Foundation for the Author of National Excellent Doctoral Dissertation of the China (Grant No. 200770)the Program for New Century Excellent Talents in University (Grant No. NCET-07-0084)the Introduction of Foreign Advanced Agricultural Science and Technology into China (Grant No. 2009-4-22)
文摘We investigated phenotypic variation ofPopulus simonii from five provenances in northern China. Our results show that significant differences exist between plants of different provenances in morphological and physiological traits, except for leaf-stalk length and the number of leaf margins. The coefficient of variation for all traits ranges from 14.77% to 81.49%. The mean phenotypic coefficient of differentiation （VST） is 47.1%, which means that the variation within provenances is the major source for phenotypic variation in P. simonii. Given our cluster analysis of provenances based on an average linkage computing method, the five provenances ofP. simonii investigated could be divided into three groups. Our results provide a theoretical basis for genetic resource conservation and provenance selection of natural P. simonii in northern China.
文摘The growth performance of twenty poplar （Populus deltoides Bartr.） clones, planted in the central-plain region of Punjab in north-western India, was evaluated using a randomized block design with three replications and plot size of four plants. Significant differences among clones were observed for diameter at breast height （DBH）, height and volume per tree at age five, six and eight years. Clone L-48/89 recorded significantly superior volume than the control （G-48） at all ages, with superiority of 51.4, 43.9 and 48.5 per cent at age five, six and eight years, respectively. The phenotypic and genotypic coefficients of variation were the highest for volume （26.55-34.66% and 15.84-26.00%） and the minimum for tree height （8.43-12.13% and 4.71-7.59%）. The broad sense heritability was relatively higher for DBH （0.42-0.55） and genetic advance as per cent of mean was highest for volume （19.48-40.18）. All genetic parameters increased with age. All traits showed significant positive correlation with each other.
基金funded by the Natural Science Foundation of China(31070591)Special National Forestry Public Welfare Industry Research(201104022)the support of Agriculture and Animal Husbandry College of Tibet University
文摘Electrical impedance （El） and phase angle （PHI） parameters in AC impedance spectroscopy are important electrical parameters in the study of medical pathology. However, little is known about their application in variation and genetic relationship studies of forest trees. In order to test whether impedance parameters could be used in genetic relationship analysis among conifer species, E1 and PHI were measured in a seedling experiment test composed of Pinus tabuliformis, Pinus yunnanensis, and Pinus densata in a habitat of Pinus tabuliformis. The results showed that variations in both EI and PHI among species were sig- nificant in different electric frequencies, and the EI and PHI values measured in the two populations of P. densata were between the two parental species, P. yunnanensis and P. tabuliformis. These results show that these two impedance parameters could reflect the genetic relationship among pine species. This was the first time using the two AC impedance spectroscopy parameters to test the genetic relationship analysis between tree species, and would be a hopeful novelreference methodology for future studies in evolution and genetic variation of tree species.
基金supported by the National Key Research and Development Program of China(2021YFD2201200)the Fundamental Research Funds for the Central Universities(2572020DR01).
文摘Plant phenotypes are infl uenced by genetic and environmental factors.In this study,the growth traits of 43 one-year-old poplar clones grown at diff erent sites in northeast China(Dongling State-owned Forest Protection Center,DL;Baicheng State-owned forest farm,BC;and Cuohai Forest farm,CH)were evaluated and analyzed across clones and sites.Results show signifi cant diff erences in height and base diameter among sites and clones.Phenotypic and genetic variation coeffi cients ranged from 49.59%(BC)to 58.39%(DL)and from 49.33%(BC)to 58.06%(DL),respectively.Additive main eff ects and multiplicative interaction(AMMI)analysis showed that the eff ects of genotype,environment,and genotype×environment interaction were signifi cantly diff erent.Genetic variation was the main source of variation,accounting for 48.6%.AMMI biplot showed that clone 30 had high and stable yields at the three sites.From an evaluation of multiple traits and GGE biplot that clone 2,clone 30 and clone 25 had higher yield than the other clones at DL,CH and BC,respectively.These clones will provide material for forest regeneration in northeast China.
基金supported by the project of Guizhou Province Agricultural Science&Technology(No.2010-3062)the project of important Science&Technology Specific Project of Guizhou Province
文摘Patterns of variation in the chemical composition of wood, i.e., holocellulose, cellulose and lignin contents and 1% NaOH extractives were studied in 12 natural populations of Pinus manssoniana Lamb. in Guizhou Province, China, using wood cores as experiment material. The results show statistically significant differences among provenances in holocellulose, cellulose and 1% NaOH extractive contents. The largest coefficient of variation among the provenances was found in the 1% NaOH extractive content and the smallest in the holocellulose content. Variation of lignin content occurred within provenances. Correlations between chemi- cal compositions of wood and factors of local geography and meteorology were largely insignificant. The chemical composition of wood presented patterns of random variation. The correlation of 1% NaOH extractive content with holocellulose content was sig- nificant （r = -0.68）. There was also significantly negative correlation （r = -0.62） between cellulose and lignin content. On the basis of a UPGMA cluster analysis, we identified three provenances of masson pine among the 12 studied, i.e., those of Wengan, Tongzi and Luodian with high cellulose contents, low levels of 1% NaOH extractive and moderate lignin contents, which we recommend as promising provenances for growing of pulp wood and the manufacture of paper in Guizhou Province.
基金supported by the Thirteenth Five-Year Plan for Key & Research Projects of China(2017YFD0600606-09)the National Natural Science Foundation of China (NSFC31600541)the Science Foundation of China Post-doctor (2016M591053)。
文摘Picea spp.are a prominent component of the boreal,montane,and sub-alpine forests in the Northern Hemisphere,and have substantial economic importance due to their high quality fibre.However,performance and wood properties of the genus have not been systematically evaluated in China.This study aimed to examine genetic variations in growth traits,phenology,and wood properties of 17 Picea species,(three from North America,two from Europe,and 12 from China),in response to specific climate factors using a randomized complete block design in a monsoonal,middle latitude area of China.Results show that all growth traits and wood properties significantly varied among species(P <0.00).Of the 17 species examined,P.abies and P.pungens were the tallest with heights of 2.5 and 1.9 m at 9 years old,respectively,90% and 50% greater than the average heights.Branch length,number,and angles of both P.abies and P.pungens were greater than those of the other species.Heights of P.glauca and P.omorika were20-33% greater than the average.Fast-growing species had high quantities of first lateral branches and large top whorl branch lengths.The taller species exhibited greater tracheid lengths and average tracheid lengths to radial central diameter ratios(TL/R_D2),but smaller cell wall thicknesses to tracheid radial lumen diameter ratios(WT/R_D1),which is favorable for pulp production.Correlation analysis revealed that height and ring width had significant positive correlations with latitude but strongly negative correlations with longitude.Height was positively correlated with average annual rainfalls,but negative correlations with average yearly sunshine.Due to the increased average annual sunshine at the China test site relative to the seed source,species such as P.abies,P.pungens,P.glauca,and P.omorika from wet,humid areas performed better than native species.Considering similar temperatures,precipitation may be the main factor affecting growth,which is beneficial for predicting the extent of spruce expansion.These results should encourage further testing and provide reference information for future exotic species studies in this part of China.
基金The project supported by the National Natural Science Foundation of China (No. 10435020)the project of backbone youth teachers in high Colleges of Education Department of China Central Government
文摘In order to compare the contemporary and genetic variation effect on Arabidop-sis thaliana treated with N+ implantation and 7-ray radiation, the authors did some statistical comparison on the germinating rate and the development period, and analyzed the content of soluble proteins, the activity of some enzymes, isoenzymes profile, and along with the variation in genome DNA of two generations by RAPD. With N+ implantation there was an analogical 'saddle model' relationship between doses and the plant development, soluble proteins, the activity of some enzymes and isoenzymes profile. A certain connection might exist between the similar dose-effect relations among enzymes activity, isoenzymes profile and content of soluble proteins. Maybe, there also exists a certain connection between the mutants of development period and that of DNA variations, between the hereditability of the effect of N+ implantation on the isoenzymes, the activities of enzymes and the hereditability of DNA variations. So it is presumed that the implanted ions, maybe, have participated in metabolism process of organism including that of genome DNA, to consequently affect vital process, such as the changes of gene structure, gene expression manner and gene repair mechanism, and finally result in mutation on phenotype and molecular level. Furthermore, the results definitely showed that mutagenic mechanism induced by N+ implantation is very complicated and is much different from that induced by traditional 7-ray radiation.
基金supported by the National Natural Science Foundation of China (Nos. 30570434, 10435020)special funding from the Ministry of Education of China for Backbone Young Teachers at Key Universities
文摘Ion implantation, as a new biophysically mutagenic technique, has shown a great potential for crop breeding. By analyzing polymorphisms of genomic DNA through RAPD-based DNA analysis, we compared the frequency and efficiency of somatic and germ-line mutations of Arabidopsis thaliana treated with N^＋ ion implantation and γ-rays radiation. Our data support the following conclusions： （1） N^＋ ion implantation can induce a much wider spectrum of mutations than γ-rays radiation does; （2） Unlike the linear correlation between the doses and their effect in γ-rays radiation, the dose-effect correlation in N^＋ ion implantation is nonlinear; （3） Like γ-rays radiation, both somatic and germ-line mutations could be induced by N^＋ ion implantation; and （4） RAPD deletion patterns are usually seen in N^＋ ion implantation induced mutation.
基金supported by the Institute of Forest Genetics and Forest Tree Breedingthe Institute of Forest Botany, Georg-August-University, Gttingen,Germanyprovided by the university and a scholarship from the European Union
文摘Bud flushing is very important for the survival and growth of trees, a phenomenon matched each year with the annual course of temperature and the timing of bud flushing in the spring. Essentially it represents a serious ecological and evolutionary tradeoff between survival and growth. The most suitable timing of bud burst permits trees to begin growth sufficiently early to take advantage of favorable spring conditions, but late enough to decrease the risks of tissue damage from late frost. In the present study bud burst spring phenology of poplar （Populus tremula and P. tremuloides） from eight different provenances, originating from Eu- rope and the USA, was observed during March and April, 2009. The experimental plot was located at Solling, Germany （51~44＇0＂ N, 9036＇0＇＇ E）. A six stage subjective scoring system of bud burst phenology was used to identify the phenological stages of the seed- lings, where each plant was observed twice a week. The aim of the study was to predict phenotypic variation in poplar, originating from regions between 42~ and 60~ N latitude, growing in similar environments. Timing of bud flushing of poplar was recorded. It was found that seedlings of provenance 3, which originated from 42.35~ N latitude, started and completed flushing significantly earlier than those of other provenances, while seedlings of provenance 5, originating from 54.29~ N latitude, started flushing very late and only a few plants reached top scoring at the end of the experimental period. Analysis of variance showed statistically highly signifi- cant differences （p 〈 0.05） in bud flushing among the provenances. The correlation between scoring and flushing periods was very strong within provenances although the flushing pattern differed among provenances （origin of the planted seedlings）. Bud flushing showed a negative correlation with the origin of the planted seedlings. Given the field experience gained with this experiment, it is recommended that seedlings from provenances 5 and 8 could be used for future plantations where late frost may be a problem for the young shoots of seedlings.
