In this paper, we investigate the issues of initialization and deployment of wireless sensor networks（WSNs） under IEEE 802.11 b/g interference and fading channels using frequency hopping（FH）. We propose an FH algo...In this paper, we investigate the issues of initialization and deployment of wireless sensor networks（WSNs） under IEEE 802.11 b/g interference and fading channels using frequency hopping（FH）. We propose an FH algorithm for WSNs, which is implemented and tested with a pair of nodes employing IPv6 over low power wireless personal area networks（6 LoWPAN） standard.The merits and demerits of the proposed FH scheme in WSNs are studied under strong IEEE 802.11 b/g interference and frequency selective fading channels. We compare the performance results of the proposed FH scheme with those obtained by single-channel radio in WSNs, and show that FH maintains very reliable data rates in the presence of adverse conditions where the single-channel radio fails. We determine a minimum center frequency offset of channels between IEEE 802.15.4 and IEEE 802.11 b/g-based networks, which guarantees the error free network operation of IEEE802.15.4 using a single channel. We design a second FH procedure comprising only four free channels（15, 20, 25, and 26） of IEEE 802.15.4 standard, and show that in the presence of nearby IEEE 802.11 b/g interference, the IEEE 802.15.4 data rate using this method is always 98% and more.展开更多
针对Chirp基调制信号在分数阶傅里叶变换域特征明显,信号周期易被检测等问题,提出一种能够实现多域隐蔽的低检测概率(low probability of detection,LPD)波形构造方法。该方法采用分数阶傅里叶变换跳频(fractional Fourier transform-fr...针对Chirp基调制信号在分数阶傅里叶变换域特征明显,信号周期易被检测等问题,提出一种能够实现多域隐蔽的低检测概率(low probability of detection,LPD)波形构造方法。该方法采用分数阶傅里叶变换跳频(fractional Fourier transform-frequency hopping,FrFT-FH)架构,在不改变Chirp信号扩频增益的前提下,通过时宽分割和重组(time width division and reorganization,TDR),降低信号在分数阶傅里叶变换域和周期域的能量聚敛特性。仿真结果表明,相较于现有LPD波形只能实现单一特征域隐蔽的问题,所提波形在不影响系统通信性能的前提下,面对频域检测、分数阶傅里叶变换域检测、周期域检测多种检测手段,在10 dB信噪比条件下的信号检测概率均低于0.2,满足系统在不同特征域下的LPD需求。展开更多
By using the sparsity of frequency hopping（FH） signals,an underdetermined blind source separation（UBSS） algorithm is presented. Firstly, the short time Fourier transform（STFT） is performed on the mixed signals. ...By using the sparsity of frequency hopping（FH） signals,an underdetermined blind source separation（UBSS） algorithm is presented. Firstly, the short time Fourier transform（STFT） is performed on the mixed signals. Then, the mixing matrix, hopping frequencies, hopping instants and the hooping rate can be estimated by the K-means clustering algorithm. With the estimated mixing matrix, the directions of arrival（DOA） of source signals can be obtained. Then, the FH signals are sorted and the FH pattern is obtained. Finally, the shortest path algorithm is adopted to recover the time domain signals. Simulation results show that the correlation coefficient between the estimated FH signal and the source signal is above 0.9 when the signal-to-noise ratio（SNR） is higher than 0 d B and hopping parameters of multiple FH signals in the synchronous orthogonal FH network can be accurately estimated and sorted under the underdetermined conditions.展开更多
基金supported by the Important National Science and Technology Specific Project of China(2018ZX03001020-0052016ZX03001022-006)+2 种基金the National Natural Science Foundation of China(61771308)the Shanghai Science and Technology Committee(16DZ1100402)the Special Project of Military and Civilian Integration of Shanghai Economic and Information Committee with the name"Ultra High Sensitivity UAV Communication System Based on Radar Related Technology"
文摘In this paper, we investigate the issues of initialization and deployment of wireless sensor networks（WSNs） under IEEE 802.11 b/g interference and fading channels using frequency hopping（FH）. We propose an FH algorithm for WSNs, which is implemented and tested with a pair of nodes employing IPv6 over low power wireless personal area networks（6 LoWPAN） standard.The merits and demerits of the proposed FH scheme in WSNs are studied under strong IEEE 802.11 b/g interference and frequency selective fading channels. We compare the performance results of the proposed FH scheme with those obtained by single-channel radio in WSNs, and show that FH maintains very reliable data rates in the presence of adverse conditions where the single-channel radio fails. We determine a minimum center frequency offset of channels between IEEE 802.15.4 and IEEE 802.11 b/g-based networks, which guarantees the error free network operation of IEEE802.15.4 using a single channel. We design a second FH procedure comprising only four free channels（15, 20, 25, and 26） of IEEE 802.15.4 standard, and show that in the presence of nearby IEEE 802.11 b/g interference, the IEEE 802.15.4 data rate using this method is always 98% and more.
文摘针对Chirp基调制信号在分数阶傅里叶变换域特征明显,信号周期易被检测等问题,提出一种能够实现多域隐蔽的低检测概率(low probability of detection,LPD)波形构造方法。该方法采用分数阶傅里叶变换跳频(fractional Fourier transform-frequency hopping,FrFT-FH)架构,在不改变Chirp信号扩频增益的前提下,通过时宽分割和重组(time width division and reorganization,TDR),降低信号在分数阶傅里叶变换域和周期域的能量聚敛特性。仿真结果表明,相较于现有LPD波形只能实现单一特征域隐蔽的问题,所提波形在不影响系统通信性能的前提下,面对频域检测、分数阶傅里叶变换域检测、周期域检测多种检测手段,在10 dB信噪比条件下的信号检测概率均低于0.2,满足系统在不同特征域下的LPD需求。
基金supported by the National Natural Science Foundation of China(6120113461201135)+2 种基金the 111 Project(B08038)the Fundamental Research Funds for the Central Universities(72124669)the Open Research Fund of the Academy of Application(2014CXJJ-TX06)
文摘By using the sparsity of frequency hopping（FH） signals,an underdetermined blind source separation（UBSS） algorithm is presented. Firstly, the short time Fourier transform（STFT） is performed on the mixed signals. Then, the mixing matrix, hopping frequencies, hopping instants and the hooping rate can be estimated by the K-means clustering algorithm. With the estimated mixing matrix, the directions of arrival（DOA） of source signals can be obtained. Then, the FH signals are sorted and the FH pattern is obtained. Finally, the shortest path algorithm is adopted to recover the time domain signals. Simulation results show that the correlation coefficient between the estimated FH signal and the source signal is above 0.9 when the signal-to-noise ratio（SNR） is higher than 0 d B and hopping parameters of multiple FH signals in the synchronous orthogonal FH network can be accurately estimated and sorted under the underdetermined conditions.
