The rheological properties of two kinds of oil-based drilling fluids with typically composition were studied at pressures up to 138 MPa and temperatures up to 204 ℃ using the RheoChan 7400 Rheometer.The experimental ...The rheological properties of two kinds of oil-based drilling fluids with typically composition were studied at pressures up to 138 MPa and temperatures up to 204 ℃ using the RheoChan 7400 Rheometer.The experimental results show that the apparent viscosity,plastic viscosity and yield point decrease with the increase of temperature,and increase with the increase of pressure.The effect of pressure on the apparent viscosity,plastic viscosity and yield point is considerable at ambient temperature.However,this effect gradually reduces with the increase of temperature.The major factor influencing the rheological properties of oil-based drilling fluids is temperature instead of pressure in the deep sections of oil wells.On the basis of numerous experiments,the model for predict the apparent viscosity,plastic viscosity and yield point of oil-based drilling fluids at high temperature and pressure was established using the method of regressive analysis.It is confirmed that the calculated data are in good agreement with the measured data,and the correlation coefficients are more than 0.98.The model is convenient for use and suitable for the application in drilling operations.展开更多
Geological setting\;Jinding superlarge Pb\|Zn deposit lies in the Lanping basin between the Lancangjiang fracture zone and the Jinshajiang\|Ailaoshan fracture zone. The Lanping basin is a Meso\|Cenozoic rifting basin ...Geological setting\;Jinding superlarge Pb\|Zn deposit lies in the Lanping basin between the Lancangjiang fracture zone and the Jinshajiang\|Ailaoshan fracture zone. The Lanping basin is a Meso\|Cenozoic rifting basin whose basement consists of the Paleozoic strata. Mesozoic paralic and continental sediments with a thickness of about 20000m deposited in the basin. In the Paleocene, gypsum\|salt\|bearing strata with a thickness of more than 1000m accumulated. In the Cenozoic, collision of the Indian plate with the Eurasian plate resulted in strong folding and napping and subsequent extensions in the Oligocene and Pliocene. The extensions were responsible for alkaline magmatic intrusion in the centre and alkaline magmatic extrusion in the east.Faulting is well developed. N\|S\|trending Bijiang fault with a length of 120km links with the Jinshajiang fracture zone in the north and with the Lancangjiang fracture zone in the south, controlling on the Cenozoic Lanping rifting basin and acting as passage\|way for ore fluids.展开更多
The Lanping Mesozoic—Cenozoic sedimentary basin, situated in the Middle section of the “Sanjiang" (Nujiang—Lancangjiang—Jinshajiang) area in the east margin of the Tibet plateau, is well known for its large p...The Lanping Mesozoic—Cenozoic sedimentary basin, situated in the Middle section of the “Sanjiang" (Nujiang—Lancangjiang—Jinshajiang) area in the east margin of the Tibet plateau, is well known for its large production of base\|metal sulphide deposits. The worldwide famous super\|large Jinding Pb\|Zn deposit is located in the middle of the basin. The evolution history of the Lanping basin since Mesozoic can be divided into six stages, i.e., ①active continental marginal basin (T 1—T 2); ②back\|arc rift basin (T 3—J 1); ③intracontinental depressive basin (J 2—J 3); ④foreland basin (K); ⑤strike\|slipping and mutual thrusting (E 1—E 3); and ⑥strike\|slipping and pull\|apart basin (N 1\|present). Three main types of Ag\|Cu polymetal deposits are recognized in the basin. Deposits of sedimentary exhalation\|hydrothermal reworking origin (type Ⅰ) are hosted chiefly in limestones, dolomitic limestones, and siliceous rocks of the Upper Triassic Sanhedong Formation (T 3 s ) in Sanshan area. Deposits formed through normal chemical sedimentation in closed to semi\|closed environments (type Ⅱ; e.g., Jinman and Baiyangchang) during the depressive and foreland basin stages occur in various horizons of Jurassic and Cretaceous ages. Hydrothermal reworking on deposits of this type during the Himalayan period are locally pronounced, especially in the west margin of the basin near the Lancangjiang thrust fault. The third deposit type in the basin (type Ⅲ; e.g., Baiyangping and Fulongchang) is the Ag\|bearing tetrahedrite vein deposits occurring almost in all Mesozoic—Cenozoic strata, especially in the Cretaceous. Ore minerals formed during synsedimentary periods of types Ⅰ and Ⅱ are relatively simple and dominated by chalcopyrite and bornite, though sphalerite, galena, pyrite, tetrahedrite and pyrite are also present. In the deposits of type Ⅲ as well as in the ores formed during the hydrothermal reworking period in deposits of type Ⅰ and Ⅱ, ore minerals are extremely complicated and characterized by predominant Ag\|bearing tetrahedrite and other complex sulfosalts of Cu\|Ni\|Co\|Fe\|As\|S and Cu\|Bi\|S series. The associated gangue minerals are mainly quartz, siderite, Fe\|dolomite, barite, and celestite.展开更多
For the study of the effect of Plagodent and Palladent noble alloy dentures (OJSC "SIC 'Supermetal'", Russia), the elemental compositions of the fluids obtained from gingival sulcus of abutment teeth...For the study of the effect of Plagodent and Palladent noble alloy dentures (OJSC "SIC 'Supermetal'", Russia), the elemental compositions of the fluids obtained from gingival sulcus of abutment teeth of metal ceramic dentures with frames made of the above-stated dental alloys, have been investigated. Response of white blood cells and fibroblasts in the gingival fluid and the mixed saliva of the patients a long time after prosthetic repair, relying on the content of proinflammatory interleukins IL-1 β and IL-6, anti-inflammatory interleukins IL-4 and IL-10, the factor of tumor necrosis TNF-α and lactoferrin, has been investigated. The results obtained have convincingly proved the biosafety of the Plagodent and Palladent noble alloys.展开更多
The behavior of single bubble rising in quiescent shear-thinning tlmds was lnvestlgateO numerically by level set metnoa. number of bubbles in a large range of Reynolds number and Eotvos number were investigated includ...The behavior of single bubble rising in quiescent shear-thinning tlmds was lnvestlgateO numerically by level set metnoa. number of bubbles in a large range of Reynolds number and Eotvos number were investigated including spherical, oblate and spherical. The bubble shape and drag coefficient were compared with experimental results. It is observed that the simulated results show good conformity to experimental results over a wide range of Reynolds number. In addition, the detailed flow field based on the reference coordinate system moving with the bubble is obtained, and the relationship among flow field, bubble shape and velocity is discussed.展开更多
Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pr...Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.展开更多
In the present work,effects of various heat transfer fluids on the discharging performance of a phase change material(PCM) included cylindrical container are numerically assessed during forced convection.The heat tran...In the present work,effects of various heat transfer fluids on the discharging performance of a phase change material(PCM) included cylindrical container are numerically assessed during forced convection.The heat transfer fluid air,hydrogen,water and nanofluid with alumina particles are used and the the geometric variation of the PCM embedded region is also considered.The finite element method is used as the solver.Dynamic features of heat exchange with various phases are explored for different heat transfer fluid types,Reynolds number(between 100 and 300) and PCM embedded region geometric variation(h_(x)between 0.01 d_(1) and 0.65 d_(1),hybetween 0.1 h_(1) and 0.4 h_(1)).It is observed that discharging time is significantly influenced by the heat transfer fluid type while full phase transition time for air is obtained as more than 10 times when hydrogen is utilized as heat transfer fluid.The best performance is achieved with nanofluid.When the PCM integrated region size is reduced,discharging time is generally reduced while due to the form of the geometry,vortex formation is established in the PCM region.This results in performance degeneration at the highest radius and height of the inner cylinder.Discharging time increases by about 12% when radius of the inner cylinder is increased from h_(x)=0.35 d_(1) to h_(x)=0.45 d_(1).Dynamic features of PCM temperature and liquid fraction are affected with Reynolds number while discharging time is reduced by about 48% when configurations with the lowest and highest Reynolds number are compared.展开更多
In this study,the effects of surfactants on the hydrodynamic characteristics of bubbles in shear-thinning fluids at low Reynolds number(Re<50)are investigated.The bubble terminal velocity and drag coefficient of bu...In this study,the effects of surfactants on the hydrodynamic characteristics of bubbles in shear-thinning fluids at low Reynolds number(Re<50)are investigated.The bubble terminal velocity and drag coefficient of bubble in clean and contaminated carboxymethylcellulose(CMC)solutions are obtained using a high-speed camera for examining differences.The results show that the existence of surfactant could reduce the terminal velocity of bubble at small volume(0.25wt%CMC:<100 mm3;0.50wt%CMC:<110 mm3),attributed to stiffening the bubble interface.However,this negative effect decreases and finally disappears with increasing bubble volume.The drag coefficient curves of the bubble in contaminated CMC solution exhibit behavior similar to that exhibited by a solid sphere at Re<10,indicating that internal circulation flow is absent at the bubble interface as compared to that in clean CMC solution.However,for 10<Re<40,a transition of drag curve from 24/Re to 16/Re in contaminated CMC solution is observed,which is easy at low SDS concentrations and high CMC concentrations.展开更多
The group-contribution (GC) methods suffer from a limitation concerning to the prediction of process-related indexes, e.g., thermal efficiency. Recently developed analytical models for thermal efficiency of organic Ra...The group-contribution (GC) methods suffer from a limitation concerning to the prediction of process-related indexes, e.g., thermal efficiency. Recently developed analytical models for thermal efficiency of organic Rankine cycles (ORCs) provide a possibility of overcoming the limitation of the GC methods because these models formulate thermal efficiency as functions of key thermal properties. Using these analytical relations together with GC methods, more than 60 organic fluids are screened for medium-low temperature ORCs. The results indicate that the GC methods can estimate thermal properties with acceptable accuracy (mean relative errors are 4.45%-11.50%);the precision, however, is low because the relative errors can vary from less than 0.1% to 45.0%. By contrast, the GC-based estimation of thermal efficiency has better accuracy and precision. The relative errors in thermal efficiency have an arithmetic mean of about 2.9% and fall within the range of 0-24.0%. These findings suggest that the analytical equations provide not only a direct way of estimating thermal efficiency but an accurate and precise approach to evaluating working fluids and guiding computer-aided molecular design of new fluids for ORCs using GC methods.展开更多
Marmarosh massif is an important structural element of the Eastern Carpathians,which differs by the geological features from the other structural-facial zones of Carpathian fold belt.Metamorphic rocks of the massif ha...Marmarosh massif is an important structural element of the Eastern Carpathians,which differs by the geological features from the other structural-facial zones of Carpathian fold belt.Metamorphic rocks of the massif have been formed under the influence of the processes of medium-and low-temperature meta-morphism and metasomatism.Within the Marmarosh massif the stratiform gold ore has展开更多
The western Tianshan high-pressure(HP) metamorphic belt represents the paleosubduction mélange of paleozoic south Tianshan ocean between the Yili-central Tianshan and Tarim plates. High-pressure veins are extensi...The western Tianshan high-pressure(HP) metamorphic belt represents the paleosubduction mélange of paleozoic south Tianshan ocean between the Yili-central Tianshan and Tarim plates. High-pressure veins are extensively developed in this HP belt. Compared with normal mid-ocean ridge basalt(N-MORB), the high-pressure veins and host rocks are enriched in light rare earth elements(LREE) and incompatible elements. But high-pressure veins show a larger variation than host rocks in total REE abundance. On the trace element spidergram, all the samples are enriched in incompatible elements and show strong positive Pb anomaly relative to N-MORB. The array tendency lines of plots of the HP rocks have apparent slopes on diagram of m(Sr) vs m(Sr)/m(Zr), m(Li) vs m(Li)/m(Y) and (m(Ce)) vs m(Ce)/m(Pb), which indicates that the enrichment in LREE and incompatible elements relative to N-MORB of the HP-metamorphic rocks from western Tianshan is not attributed to magma evolution process of the protolith. High field strength elements, such as Nb, Ta, Ti, Zr and Hf, do not show negative anomaly relative to N-MORB, which is dissimilar to that of island arc basalts. Therefore, the enrichment in LREE and incompatible elements of the HP rocks is not attributed to the enrichment of the source of the protolith. The mass ratios of Rb to Ba, Ce to Pb, Nb to U and Ta to U of high-pressure veins and host rocks are intermediate of mid-ocean ridge basalt or oceanic island basalt and continental crust. The fluids in western Tianshan paleosubduction zones are mixtures of two sources, dehydration or devolatilization of host rocks and of subducted sediments.展开更多
The hear transfer mechanism and the constitutive models for energy boundary layer in power law fluids were investigated.Two energy transfer constitutive equations models were proposed based on the assumption of simila...The hear transfer mechanism and the constitutive models for energy boundary layer in power law fluids were investigated.Two energy transfer constitutive equations models were proposed based on the assumption of similarity of velocity field momentum diffusion and temperature field heat transfer.The governing systems of partial different equations were transformed into ordinary differential equations respectively by using the similarity transformation group.One model was assumed that Prandtl number is a constant,and the other model was assumed that viscosity diffusion is analogous to thermal diffusion.The solutions were presented analytically and numerically by using the Runge-Kutta formulas and shooting technique and the associated transfer characteristics were discussed.展开更多
Modern processing technology is calling the scientific understanding of dynamic processes,where the science of complex fluids plays a central role.We summarize our recent efforts using the generic approaches of multi-...Modern processing technology is calling the scientific understanding of dynamic processes,where the science of complex fluids plays a central role.We summarize our recent efforts using the generic approaches of multi-scale physics of complex fluids on apparently irrelevant processes,i.e.the mixing of polymer blends,the processing of thermoplastic(TP) toughened thermosetting(TS) composites using phase separation of TP in TS,as well as the enhanced oil recovery using polymer soft gel.It is emphasized that the thorough physical understanding in multi-scales of time and space through the joint efforts of experiment and theory in each scale is the key issue for the modeling of various processes.展开更多
The functions of lubricants in diamond drilling were discussedin this paper. The influences of lubricant on drilling efficiency and bit′s life were compared and analyzed with simulated drilling test and lubrication t...The functions of lubricants in diamond drilling were discussedin this paper. The influences of lubricant on drilling efficiency and bit′s life were compared and analyzed with simulated drilling test and lubrication test apparatus. Lubricating mechanisms were also discussed.展开更多
The well preserved eclogitic rocks of the Tso Morari dome in eastern Ladakh, northwest Himalaya, provide information relevant to the exhumation of high pressure/low temperature rocks, and the early stage of the Himala...The well preserved eclogitic rocks of the Tso Morari dome in eastern Ladakh, northwest Himalaya, provide information relevant to the exhumation of high pressure/low temperature rocks, and the early stage of the Himalayan orogeny. The Tso Morari unit outcrops south of the Indus suture zone (Fig.1). The eclogitic dome is underlined on its eastern part by the Zildat normal fault where serpentinite lenses and partially hydrated peridotites are abundant. The close association of the high pressure rocks and serpentinites suggests a possible role of serpentinites in the exhumation of ultrahigh\|pressure rocks. To evaluate this possibility, geochemical analyses were carried out on the serpentinites closely associated with the Tso Morari eclogites.展开更多
A magnetorheological (MR) fluids brake is a device to achieve brake by shear force of MR fluids. A MR rotary brake has the property that its braking torque changes quickly in response to an external magnetic field. In...A magnetorheological (MR) fluids brake is a device to achieve brake by shear force of MR fluids. A MR rotary brake has the property that its braking torque changes quickly in response to an external magnetic field. In this study, the design method of the circular plate MR fluids brake is investigated theoretically. The equation of the torque transmitted by the MR fluids in the brake is derived to provide the theoretical foundation in the design of the brake. Based on this equation, after mathematically manipulated, the calculations of the volume, thickness and width of the MR fluids within the circular plate MR fluids brake are yield.展开更多
KEY POINTS Because so much of the running in soccer is at less than maximal sprinting speed, creatine supplementation likely provides no benefit to match performance.Overwhelming evidence proves that a diet rich in ca...KEY POINTS Because so much of the running in soccer is at less than maximal sprinting speed, creatine supplementation likely provides no benefit to match performance.Overwhelming evidence proves that a diet rich in carbohydrates can fill muscles with glycogen, and glycogen is critical to optimal performance in soccer. Soccer players’ diets, especially in the days before hard training or competition, should include 8-10 grams of carbohydrate per kilogram of body weight (3.5-4.5 g/lb). Cereals, fruits, vegetables, breads, and pastas are good sources ofcarbohydrates. Refueling of muscle with carbohydrates should begin as soon as possible following a match or a strenuous training session. Inadequate replacement of fluids lost in sweat can lead to poor soccer performance and heat illness. Players should aim to drink enough during training sessions and matches so that their body weights after play are within about 1 kg (2.2 lb) of their starting weights. For a light workout or an easy match, especially when the weather is cool, water can be an adequate fluid replacement, if enough is ingested. But when play is strenuous and the weather is hot, carbohydrate-electrolyte sports drinks do a better job of maintaining body fluids.展开更多
基金Project(50574061) supported by the National Natural Science Foundation of ChinaProject(IRT0411) supported by the Changjiang Scholars and Innovative Research Team,Ministry of Education
文摘The rheological properties of two kinds of oil-based drilling fluids with typically composition were studied at pressures up to 138 MPa and temperatures up to 204 ℃ using the RheoChan 7400 Rheometer.The experimental results show that the apparent viscosity,plastic viscosity and yield point decrease with the increase of temperature,and increase with the increase of pressure.The effect of pressure on the apparent viscosity,plastic viscosity and yield point is considerable at ambient temperature.However,this effect gradually reduces with the increase of temperature.The major factor influencing the rheological properties of oil-based drilling fluids is temperature instead of pressure in the deep sections of oil wells.On the basis of numerous experiments,the model for predict the apparent viscosity,plastic viscosity and yield point of oil-based drilling fluids at high temperature and pressure was established using the method of regressive analysis.It is confirmed that the calculated data are in good agreement with the measured data,and the correlation coefficients are more than 0.98.The model is convenient for use and suitable for the application in drilling operations.
基金theNationalClimbingProgram(95 Pre .393 1 2 )andMLMRStrategicKeyProgram (95 0 110 3)
文摘Geological setting\;Jinding superlarge Pb\|Zn deposit lies in the Lanping basin between the Lancangjiang fracture zone and the Jinshajiang\|Ailaoshan fracture zone. The Lanping basin is a Meso\|Cenozoic rifting basin whose basement consists of the Paleozoic strata. Mesozoic paralic and continental sediments with a thickness of about 20000m deposited in the basin. In the Paleocene, gypsum\|salt\|bearing strata with a thickness of more than 1000m accumulated. In the Cenozoic, collision of the Indian plate with the Eurasian plate resulted in strong folding and napping and subsequent extensions in the Oligocene and Pliocene. The extensions were responsible for alkaline magmatic intrusion in the centre and alkaline magmatic extrusion in the east.Faulting is well developed. N\|S\|trending Bijiang fault with a length of 120km links with the Jinshajiang fracture zone in the north and with the Lancangjiang fracture zone in the south, controlling on the Cenozoic Lanping rifting basin and acting as passage\|way for ore fluids.
文摘The Lanping Mesozoic—Cenozoic sedimentary basin, situated in the Middle section of the “Sanjiang" (Nujiang—Lancangjiang—Jinshajiang) area in the east margin of the Tibet plateau, is well known for its large production of base\|metal sulphide deposits. The worldwide famous super\|large Jinding Pb\|Zn deposit is located in the middle of the basin. The evolution history of the Lanping basin since Mesozoic can be divided into six stages, i.e., ①active continental marginal basin (T 1—T 2); ②back\|arc rift basin (T 3—J 1); ③intracontinental depressive basin (J 2—J 3); ④foreland basin (K); ⑤strike\|slipping and mutual thrusting (E 1—E 3); and ⑥strike\|slipping and pull\|apart basin (N 1\|present). Three main types of Ag\|Cu polymetal deposits are recognized in the basin. Deposits of sedimentary exhalation\|hydrothermal reworking origin (type Ⅰ) are hosted chiefly in limestones, dolomitic limestones, and siliceous rocks of the Upper Triassic Sanhedong Formation (T 3 s ) in Sanshan area. Deposits formed through normal chemical sedimentation in closed to semi\|closed environments (type Ⅱ; e.g., Jinman and Baiyangchang) during the depressive and foreland basin stages occur in various horizons of Jurassic and Cretaceous ages. Hydrothermal reworking on deposits of this type during the Himalayan period are locally pronounced, especially in the west margin of the basin near the Lancangjiang thrust fault. The third deposit type in the basin (type Ⅲ; e.g., Baiyangping and Fulongchang) is the Ag\|bearing tetrahedrite vein deposits occurring almost in all Mesozoic—Cenozoic strata, especially in the Cretaceous. Ore minerals formed during synsedimentary periods of types Ⅰ and Ⅱ are relatively simple and dominated by chalcopyrite and bornite, though sphalerite, galena, pyrite, tetrahedrite and pyrite are also present. In the deposits of type Ⅲ as well as in the ores formed during the hydrothermal reworking period in deposits of type Ⅰ and Ⅱ, ore minerals are extremely complicated and characterized by predominant Ag\|bearing tetrahedrite and other complex sulfosalts of Cu\|Ni\|Co\|Fe\|As\|S and Cu\|Bi\|S series. The associated gangue minerals are mainly quartz, siderite, Fe\|dolomite, barite, and celestite.
文摘For the study of the effect of Plagodent and Palladent noble alloy dentures (OJSC "SIC 'Supermetal'", Russia), the elemental compositions of the fluids obtained from gingival sulcus of abutment teeth of metal ceramic dentures with frames made of the above-stated dental alloys, have been investigated. Response of white blood cells and fibroblasts in the gingival fluid and the mixed saliva of the patients a long time after prosthetic repair, relying on the content of proinflammatory interleukins IL-1 β and IL-6, anti-inflammatory interleukins IL-4 and IL-10, the factor of tumor necrosis TNF-α and lactoferrin, has been investigated. The results obtained have convincingly proved the biosafety of the Plagodent and Palladent noble alloys.
基金Project(21406141)supported by the National Natural Science Foundation of ChinaProject(20141078)supported by the Scientific Research Starting Foundation for Doctors of Liaoning Province,China+1 种基金Project(L2014060)supported by the Foundation of Department of Education of Liaoning Province,ChinaProject(157B21)supported by the Scientific Research Starting Foundation for Doctors of Shenyang Aerospace University,China
文摘The behavior of single bubble rising in quiescent shear-thinning tlmds was lnvestlgateO numerically by level set metnoa. number of bubbles in a large range of Reynolds number and Eotvos number were investigated including spherical, oblate and spherical. The bubble shape and drag coefficient were compared with experimental results. It is observed that the simulated results show good conformity to experimental results over a wide range of Reynolds number. In addition, the detailed flow field based on the reference coordinate system moving with the bubble is obtained, and the relationship among flow field, bubble shape and velocity is discussed.
基金Project(50574061) supported by the National Natural Science Foundation of China
文摘Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.
文摘In the present work,effects of various heat transfer fluids on the discharging performance of a phase change material(PCM) included cylindrical container are numerically assessed during forced convection.The heat transfer fluid air,hydrogen,water and nanofluid with alumina particles are used and the the geometric variation of the PCM embedded region is also considered.The finite element method is used as the solver.Dynamic features of heat exchange with various phases are explored for different heat transfer fluid types,Reynolds number(between 100 and 300) and PCM embedded region geometric variation(h_(x)between 0.01 d_(1) and 0.65 d_(1),hybetween 0.1 h_(1) and 0.4 h_(1)).It is observed that discharging time is significantly influenced by the heat transfer fluid type while full phase transition time for air is obtained as more than 10 times when hydrogen is utilized as heat transfer fluid.The best performance is achieved with nanofluid.When the PCM integrated region size is reduced,discharging time is generally reduced while due to the form of the geometry,vortex formation is established in the PCM region.This results in performance degeneration at the highest radius and height of the inner cylinder.Discharging time increases by about 12% when radius of the inner cylinder is increased from h_(x)=0.35 d_(1) to h_(x)=0.45 d_(1).Dynamic features of PCM temperature and liquid fraction are affected with Reynolds number while discharging time is reduced by about 48% when configurations with the lowest and highest Reynolds number are compared.
基金Project(21406141)supported by the National Natural Science Foundation of ChinaProject(20141078)supported by the National Basic Research Program,ChinaProject(L201733)supported by the Research Foundation of Education Bureau of Liaoning Province,China
文摘In this study,the effects of surfactants on the hydrodynamic characteristics of bubbles in shear-thinning fluids at low Reynolds number(Re<50)are investigated.The bubble terminal velocity and drag coefficient of bubble in clean and contaminated carboxymethylcellulose(CMC)solutions are obtained using a high-speed camera for examining differences.The results show that the existence of surfactant could reduce the terminal velocity of bubble at small volume(0.25wt%CMC:<100 mm3;0.50wt%CMC:<110 mm3),attributed to stiffening the bubble interface.However,this negative effect decreases and finally disappears with increasing bubble volume.The drag coefficient curves of the bubble in contaminated CMC solution exhibit behavior similar to that exhibited by a solid sphere at Re<10,indicating that internal circulation flow is absent at the bubble interface as compared to that in clean CMC solution.However,for 10<Re<40,a transition of drag curve from 24/Re to 16/Re in contaminated CMC solution is observed,which is easy at low SDS concentrations and high CMC concentrations.
基金Project(51778626) supported by the National Natural Science Foundation of China
文摘The group-contribution (GC) methods suffer from a limitation concerning to the prediction of process-related indexes, e.g., thermal efficiency. Recently developed analytical models for thermal efficiency of organic Rankine cycles (ORCs) provide a possibility of overcoming the limitation of the GC methods because these models formulate thermal efficiency as functions of key thermal properties. Using these analytical relations together with GC methods, more than 60 organic fluids are screened for medium-low temperature ORCs. The results indicate that the GC methods can estimate thermal properties with acceptable accuracy (mean relative errors are 4.45%-11.50%);the precision, however, is low because the relative errors can vary from less than 0.1% to 45.0%. By contrast, the GC-based estimation of thermal efficiency has better accuracy and precision. The relative errors in thermal efficiency have an arithmetic mean of about 2.9% and fall within the range of 0-24.0%. These findings suggest that the analytical equations provide not only a direct way of estimating thermal efficiency but an accurate and precise approach to evaluating working fluids and guiding computer-aided molecular design of new fluids for ORCs using GC methods.
文摘Marmarosh massif is an important structural element of the Eastern Carpathians,which differs by the geological features from the other structural-facial zones of Carpathian fold belt.Metamorphic rocks of the massif have been formed under the influence of the processes of medium-and low-temperature meta-morphism and metasomatism.Within the Marmarosh massif the stratiform gold ore has
基金Preoject(2001CB409803) supported by the National Key Fundamental Research and Development Program of China
文摘The western Tianshan high-pressure(HP) metamorphic belt represents the paleosubduction mélange of paleozoic south Tianshan ocean between the Yili-central Tianshan and Tarim plates. High-pressure veins are extensively developed in this HP belt. Compared with normal mid-ocean ridge basalt(N-MORB), the high-pressure veins and host rocks are enriched in light rare earth elements(LREE) and incompatible elements. But high-pressure veins show a larger variation than host rocks in total REE abundance. On the trace element spidergram, all the samples are enriched in incompatible elements and show strong positive Pb anomaly relative to N-MORB. The array tendency lines of plots of the HP rocks have apparent slopes on diagram of m(Sr) vs m(Sr)/m(Zr), m(Li) vs m(Li)/m(Y) and (m(Ce)) vs m(Ce)/m(Pb), which indicates that the enrichment in LREE and incompatible elements relative to N-MORB of the HP-metamorphic rocks from western Tianshan is not attributed to magma evolution process of the protolith. High field strength elements, such as Nb, Ta, Ti, Zr and Hf, do not show negative anomaly relative to N-MORB, which is dissimilar to that of island arc basalts. Therefore, the enrichment in LREE and incompatible elements of the HP rocks is not attributed to the enrichment of the source of the protolith. The mass ratios of Rb to Ba, Ce to Pb, Nb to U and Ta to U of high-pressure veins and host rocks are intermediate of mid-ocean ridge basalt or oceanic island basalt and continental crust. The fluids in western Tianshan paleosubduction zones are mixtures of two sources, dehydration or devolatilization of host rocks and of subducted sediments.
基金Project(50476083) supported by the National Natural Science Foundation of China
文摘The hear transfer mechanism and the constitutive models for energy boundary layer in power law fluids were investigated.Two energy transfer constitutive equations models were proposed based on the assumption of similarity of velocity field momentum diffusion and temperature field heat transfer.The governing systems of partial different equations were transformed into ordinary differential equations respectively by using the similarity transformation group.One model was assumed that Prandtl number is a constant,and the other model was assumed that viscosity diffusion is analogous to thermal diffusion.The solutions were presented analytically and numerically by using the Runge-Kutta formulas and shooting technique and the associated transfer characteristics were discussed.
基金Project(20490224) supported by the National Natural Science Foundation of ChinaProject(2003CB615604) supported by the Major State Basic Research and Development Program of ChinaProject supported by Shengli oil field,SINOPEC Petrochemical Co. Ltd.
文摘Modern processing technology is calling the scientific understanding of dynamic processes,where the science of complex fluids plays a central role.We summarize our recent efforts using the generic approaches of multi-scale physics of complex fluids on apparently irrelevant processes,i.e.the mixing of polymer blends,the processing of thermoplastic(TP) toughened thermosetting(TS) composites using phase separation of TP in TS,as well as the enhanced oil recovery using polymer soft gel.It is emphasized that the thorough physical understanding in multi-scales of time and space through the joint efforts of experiment and theory in each scale is the key issue for the modeling of various processes.
文摘The functions of lubricants in diamond drilling were discussedin this paper. The influences of lubricant on drilling efficiency and bit′s life were compared and analyzed with simulated drilling test and lubrication test apparatus. Lubricating mechanisms were also discussed.
文摘The well preserved eclogitic rocks of the Tso Morari dome in eastern Ladakh, northwest Himalaya, provide information relevant to the exhumation of high pressure/low temperature rocks, and the early stage of the Himalayan orogeny. The Tso Morari unit outcrops south of the Indus suture zone (Fig.1). The eclogitic dome is underlined on its eastern part by the Zildat normal fault where serpentinite lenses and partially hydrated peridotites are abundant. The close association of the high pressure rocks and serpentinites suggests a possible role of serpentinites in the exhumation of ultrahigh\|pressure rocks. To evaluate this possibility, geochemical analyses were carried out on the serpentinites closely associated with the Tso Morari eclogites.
文摘A magnetorheological (MR) fluids brake is a device to achieve brake by shear force of MR fluids. A MR rotary brake has the property that its braking torque changes quickly in response to an external magnetic field. In this study, the design method of the circular plate MR fluids brake is investigated theoretically. The equation of the torque transmitted by the MR fluids in the brake is derived to provide the theoretical foundation in the design of the brake. Based on this equation, after mathematically manipulated, the calculations of the volume, thickness and width of the MR fluids within the circular plate MR fluids brake are yield.
文摘KEY POINTS Because so much of the running in soccer is at less than maximal sprinting speed, creatine supplementation likely provides no benefit to match performance.Overwhelming evidence proves that a diet rich in carbohydrates can fill muscles with glycogen, and glycogen is critical to optimal performance in soccer. Soccer players’ diets, especially in the days before hard training or competition, should include 8-10 grams of carbohydrate per kilogram of body weight (3.5-4.5 g/lb). Cereals, fruits, vegetables, breads, and pastas are good sources ofcarbohydrates. Refueling of muscle with carbohydrates should begin as soon as possible following a match or a strenuous training session. Inadequate replacement of fluids lost in sweat can lead to poor soccer performance and heat illness. Players should aim to drink enough during training sessions and matches so that their body weights after play are within about 1 kg (2.2 lb) of their starting weights. For a light workout or an easy match, especially when the weather is cool, water can be an adequate fluid replacement, if enough is ingested. But when play is strenuous and the weather is hot, carbohydrate-electrolyte sports drinks do a better job of maintaining body fluids.
