In the present work,the laminar plasma surface hardening method is employed to enhance the service life of metal components fabricated from 65 Mn steel.The mechanical and wear behaviors of the laminar plasma surface h...In the present work,the laminar plasma surface hardening method is employed to enhance the service life of metal components fabricated from 65 Mn steel.The mechanical and wear behaviors of the laminar plasma surface hardened 65 Mn steel were analyzed.The martensite transition transformation of the temperature of the laminar plasma-hardened 65 ferrite Mn steel was determined by a thermal-solid coupling model.Based on the orthogonal experimental results,the optimal hardening parameters were confirmed.The scanning velocity,quenching distance and arc current are 130 mm/min,50 mm and 120 A,respectively.The pearlites and ferrites are transformed into martensites in the hardened zone,while the ratio of martensite in the heataffected zone decreases with the increase in the hardening depth.Compared to the untreated 65Mn steel,the average hardness increases from 220 HV_(0.2)to 920 HV_(0.2)in the hardened zone and the corresponding absorbed power increases from 118.7 J to 175.5 J.At the same time,the average coefficient of friction(COF)decreases from 0.763 to 0.546,and the wear rate decreases from 5.39×10^(-6)mm^(3)/(N·m)to 2.95×10^(-6)mm^(3)/(N·m),indicating that the wear resistance of 65Mn steel could be significantly improved by using laminar surface hardening.With the same hardening parameters,the depth and width of the hardened zone predicted by the thermal-solid coupling model are 1.85 mm and 11.20 mm,respectively,which are in accordance with the experimental results;depth is 1.83 mm and width is 11.15 mm.In addition,the predicted hardness distributions of the simulation model are in accordance with the experimental results.These results indicate that the simulation model could effectively predict the microstructure characteristics of 65 Mn steel.展开更多
In this paper,the channel impulse response matrix(CIRM)can be expressed as a sum of couplings between the steering vectors at the base station(BS)and the eigenbases at the mobile station(MS).Nakagami distribution was ...In this paper,the channel impulse response matrix(CIRM)can be expressed as a sum of couplings between the steering vectors at the base station(BS)and the eigenbases at the mobile station(MS).Nakagami distribution was used to describe the fading of the coupling between the steering vectors and the eigenbases.Extensive measurements were carried out to evaluate the performance of this proposed model.Furthermore,the physical implications of this model were illustrated and the capacities are analyzed.In addition,the azimuthal power spectrum(APS)of several models was analyzed.Finally,the channel hardening effect was simulated and discussed.Results showed that the proposed model provides a better fit to the measured results than the other CBSM,i.e.,Weichselberger model.Moreover,the proposed model can provide better tradeoff between accuracy and complexity in channel synthesis.This CIRM model can be used for massive MIMO design in the future communication system design.展开更多
This study presents a machine learning-based method for predicting fragment velocity distribution in warhead fragmentation under explosive loading condition.The fragment resultant velocities are correlated with key de...This study presents a machine learning-based method for predicting fragment velocity distribution in warhead fragmentation under explosive loading condition.The fragment resultant velocities are correlated with key design parameters including casing dimensions and detonation positions.The paper details the finite element analysis for fragmentation,the characterizations of the dynamic hardening and fracture models,the generation of comprehensive datasets,and the training of the ANN model.The results show the influence of casing dimensions on fragment velocity distributions,with the tendencies indicating increased resultant velocity with reduced thickness,increased length and diameter.The model's predictive capability is demonstrated through the accurate predictions for both training and testing datasets,showing its potential for the real-time prediction of fragmentation performance.展开更多
The shear characteristics of soil-structure interfaces with different roughness are studied systematically by us-ing the DRS-1 high normal stress and residual shear apparatus. The experimental results indicate that,un...The shear characteristics of soil-structure interfaces with different roughness are studied systematically by us-ing the DRS-1 high normal stress and residual shear apparatus. The experimental results indicate that,under a relatively high normal stress,normal stress and the coefficient of structural roughness are the most important factors affecting the mechanical interface characteristics. The relationship between shear stress and shear displacement of the soil-structure interface is a hyperbolic curve with high regression accuracy. Based on our experimental results,a nonlinear elastic con-stitutive model of the soil-structure interface under relatively high normal stress is established with a definite physical meaning for its parameters. The model can predict the strain hardening behavior of the soil during the shearing process. The results show an encouraging agreement with experimental data from direct shear tests.展开更多
小应变硬化土(hardening soil with small strain stiffness,HSS)模型能反映土体在小应变范围内的非线性,广泛应用于土工变形分析。海上风电基础对变形控制要求高,需考虑土体的小应变特性。通过固结试验、三轴固结排水试验、三轴固结排...小应变硬化土(hardening soil with small strain stiffness,HSS)模型能反映土体在小应变范围内的非线性,广泛应用于土工变形分析。海上风电基础对变形控制要求高,需考虑土体的小应变特性。通过固结试验、三轴固结排水试验、三轴固结排水加卸载试验与共振柱试验,获得了江苏大丰海域海洋土HSS模型主要参数,并建立了HSS模型相关模量参数与土体物理参数之间的关系。试验成果可为海洋土HSS模型分析及参数取值提供重要参考,具有一定的工程价值。展开更多
基金appreciate the support of the Key Laboratory of Mechanical Structure Optimization&Material Application Technology of Luzhou(No.SCHYZSA-2022-02)the Scientific Research and Innovation Team Program of Sichuan University of Science and Technology(No.SUSE652A004)+1 种基金the Key Laboratory of Intelligent Manufacturing of Construction Machinery Project(No.IMCM202103)the Panzhihua Key Laboratory of Advanced Manufacturing Technology Open Fund Project(No.2022XJZD01)。
文摘In the present work,the laminar plasma surface hardening method is employed to enhance the service life of metal components fabricated from 65 Mn steel.The mechanical and wear behaviors of the laminar plasma surface hardened 65 Mn steel were analyzed.The martensite transition transformation of the temperature of the laminar plasma-hardened 65 ferrite Mn steel was determined by a thermal-solid coupling model.Based on the orthogonal experimental results,the optimal hardening parameters were confirmed.The scanning velocity,quenching distance and arc current are 130 mm/min,50 mm and 120 A,respectively.The pearlites and ferrites are transformed into martensites in the hardened zone,while the ratio of martensite in the heataffected zone decreases with the increase in the hardening depth.Compared to the untreated 65Mn steel,the average hardness increases from 220 HV_(0.2)to 920 HV_(0.2)in the hardened zone and the corresponding absorbed power increases from 118.7 J to 175.5 J.At the same time,the average coefficient of friction(COF)decreases from 0.763 to 0.546,and the wear rate decreases from 5.39×10^(-6)mm^(3)/(N·m)to 2.95×10^(-6)mm^(3)/(N·m),indicating that the wear resistance of 65Mn steel could be significantly improved by using laminar surface hardening.With the same hardening parameters,the depth and width of the hardened zone predicted by the thermal-solid coupling model are 1.85 mm and 11.20 mm,respectively,which are in accordance with the experimental results;depth is 1.83 mm and width is 11.15 mm.In addition,the predicted hardness distributions of the simulation model are in accordance with the experimental results.These results indicate that the simulation model could effectively predict the microstructure characteristics of 65 Mn steel.
基金supported by the Key R&D Project of Jiangsu Province(Modern Agriculture)under Grant BE2022322 the"Pilot Plan"Internet of Things special project(China Institute of Io T(wuxi)and Wuxi Internet of Things Innovation Promotion Center)under Grant 2022SP-T16-Bin part by the 111 Project under Grant B12018+2 种基金in part by the Six talent peaks project in Jiangsu Provincein part by the open foundation of Key Laboratory of Wireless Sensor Network and Communication,Shanghai Institute of Microsystem and Information Technology,Chinese Academy of Sciences under Grant 20190917in part by the open research fund of Key Lab of Broadband Wireless Communication and Sensor Network Technology(Nanjing University of Posts and Telecommunications,Ministry of Education)。
文摘In this paper,the channel impulse response matrix(CIRM)can be expressed as a sum of couplings between the steering vectors at the base station(BS)and the eigenbases at the mobile station(MS).Nakagami distribution was used to describe the fading of the coupling between the steering vectors and the eigenbases.Extensive measurements were carried out to evaluate the performance of this proposed model.Furthermore,the physical implications of this model were illustrated and the capacities are analyzed.In addition,the azimuthal power spectrum(APS)of several models was analyzed.Finally,the channel hardening effect was simulated and discussed.Results showed that the proposed model provides a better fit to the measured results than the other CBSM,i.e.,Weichselberger model.Moreover,the proposed model can provide better tradeoff between accuracy and complexity in channel synthesis.This CIRM model can be used for massive MIMO design in the future communication system design.
基金supported by Poongsan-KAIST Future Research Center Projectthe fund support provided by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(Grant No.2023R1A2C2005661)。
文摘This study presents a machine learning-based method for predicting fragment velocity distribution in warhead fragmentation under explosive loading condition.The fragment resultant velocities are correlated with key design parameters including casing dimensions and detonation positions.The paper details the finite element analysis for fragmentation,the characterizations of the dynamic hardening and fracture models,the generation of comprehensive datasets,and the training of the ANN model.The results show the influence of casing dimensions on fragment velocity distributions,with the tendencies indicating increased resultant velocity with reduced thickness,increased length and diameter.The model's predictive capability is demonstrated through the accurate predictions for both training and testing datasets,showing its potential for the real-time prediction of fragmentation performance.
基金Projects 50534040 supported by the National Natural Science Foundation of China2002CB412704 by the Major State Basic Research and Development Program of China
文摘The shear characteristics of soil-structure interfaces with different roughness are studied systematically by us-ing the DRS-1 high normal stress and residual shear apparatus. The experimental results indicate that,under a relatively high normal stress,normal stress and the coefficient of structural roughness are the most important factors affecting the mechanical interface characteristics. The relationship between shear stress and shear displacement of the soil-structure interface is a hyperbolic curve with high regression accuracy. Based on our experimental results,a nonlinear elastic con-stitutive model of the soil-structure interface under relatively high normal stress is established with a definite physical meaning for its parameters. The model can predict the strain hardening behavior of the soil during the shearing process. The results show an encouraging agreement with experimental data from direct shear tests.
文摘小应变硬化土(hardening soil with small strain stiffness,HSS)模型能反映土体在小应变范围内的非线性,广泛应用于土工变形分析。海上风电基础对变形控制要求高,需考虑土体的小应变特性。通过固结试验、三轴固结排水试验、三轴固结排水加卸载试验与共振柱试验,获得了江苏大丰海域海洋土HSS模型主要参数,并建立了HSS模型相关模量参数与土体物理参数之间的关系。试验成果可为海洋土HSS模型分析及参数取值提供重要参考,具有一定的工程价值。
