现有大跨径桥梁有限元模型修正(finite element model updating,FEMU)方法一般未考虑运营荷载对结构动力特性的影响,导致修正后模型的参数变异性大。鉴于此,提出了一种考虑运营荷载的层次贝叶斯有限元模型修正方法,该方法包含考虑温度...现有大跨径桥梁有限元模型修正(finite element model updating,FEMU)方法一般未考虑运营荷载对结构动力特性的影响,导致修正后模型的参数变异性大。鉴于此,提出了一种考虑运营荷载的层次贝叶斯有限元模型修正方法,该方法包含考虑温度和交通荷载的概率参数修正、概率响应预测和结构状态评估。首先,根据监测数据的相关性分析结果确定了计算理论频率时需要考虑的荷载。随后,建立了温度-弹性模量线性关系,并基于动态称重(weigh-in-motion,WIM)数据,提出一种车辆荷载估计方法,以在有限元模型中定量考虑运营荷载对结构频率的影响。同时,引入两阶段马尔科夫链蒙特卡洛(Markov chain Monte Carlo,MCMC)采样方法和响应面代理模型,以提高概率模型修正的计算速率。该方法在一座采集了两年监测数据的大跨径拱桥上得到了验证。结果表明,在考虑运营荷载、参数不确定性和建模误差后,实测频率基本处于预测频率的95%置信区间内。最后,基于实测响应和预测响应置信区间提出了一个结构状态指标,并利用该指标检测出该桥的路面铺装更换过程。展开更多
We present an inverse methodology for deriving viscoplasticity constitutive model parameters for use in explicit finite element simulations of dynamic processes using functional experiments, i.e., those which provide ...We present an inverse methodology for deriving viscoplasticity constitutive model parameters for use in explicit finite element simulations of dynamic processes using functional experiments, i.e., those which provide value beyond that of constitutive model development. The developed methodology utilises Bayesian optimisation to minimise the error between experimental measurements and numerical simulations performed in LS-DYNA. We demonstrate the optimisation methodology using high hardness armour steels across three types of experiments that induce a wide range of loading conditions: ballistic penetration, rod-on-anvil, and near-field blast deformation. By utilising such a broad range of conditions for the optimisation, the resulting constitutive model parameters are generalised, i.e., applicable across the range of loading conditions encompassed the by those experiments(e.g., stress states, plastic strain magnitudes, strain rates, etc.). Model constants identified using this methodology are demonstrated to provide a generalisable model with superior predictive accuracy than those derived from conventional mechanical characterisation experiments or optimised from a single experimental condition.展开更多
文摘现有大跨径桥梁有限元模型修正(finite element model updating,FEMU)方法一般未考虑运营荷载对结构动力特性的影响,导致修正后模型的参数变异性大。鉴于此,提出了一种考虑运营荷载的层次贝叶斯有限元模型修正方法,该方法包含考虑温度和交通荷载的概率参数修正、概率响应预测和结构状态评估。首先,根据监测数据的相关性分析结果确定了计算理论频率时需要考虑的荷载。随后,建立了温度-弹性模量线性关系,并基于动态称重(weigh-in-motion,WIM)数据,提出一种车辆荷载估计方法,以在有限元模型中定量考虑运营荷载对结构频率的影响。同时,引入两阶段马尔科夫链蒙特卡洛(Markov chain Monte Carlo,MCMC)采样方法和响应面代理模型,以提高概率模型修正的计算速率。该方法在一座采集了两年监测数据的大跨径拱桥上得到了验证。结果表明,在考虑运营荷载、参数不确定性和建模误差后,实测频率基本处于预测频率的95%置信区间内。最后,基于实测响应和预测响应置信区间提出了一个结构状态指标,并利用该指标检测出该桥的路面铺装更换过程。
文摘We present an inverse methodology for deriving viscoplasticity constitutive model parameters for use in explicit finite element simulations of dynamic processes using functional experiments, i.e., those which provide value beyond that of constitutive model development. The developed methodology utilises Bayesian optimisation to minimise the error between experimental measurements and numerical simulations performed in LS-DYNA. We demonstrate the optimisation methodology using high hardness armour steels across three types of experiments that induce a wide range of loading conditions: ballistic penetration, rod-on-anvil, and near-field blast deformation. By utilising such a broad range of conditions for the optimisation, the resulting constitutive model parameters are generalised, i.e., applicable across the range of loading conditions encompassed the by those experiments(e.g., stress states, plastic strain magnitudes, strain rates, etc.). Model constants identified using this methodology are demonstrated to provide a generalisable model with superior predictive accuracy than those derived from conventional mechanical characterisation experiments or optimised from a single experimental condition.
