A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. ...A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. The initial hanger tensions are first obtained through an iterative analysis by combining the girder-tower-only finite element(FE) model with the analytical program for shape finding of the spatial cable system. These initial hanger tensions, together with the corresponding cable coordinates and internal forces, are then included into the FE model of the total bridge system, the nonlinear analysis of which involves the optimization technique. Calculations are repeated until the optimization algorithm converges to the most optimal hanger tensions(i.e. the desired reasonable finished bridge state). The "temperature rigid arm" is introduced to offset the unavoidable initial deformations of the girder and tower, which are due to the huge axial forces originated from the main cable. Moreover, by changing the stiffness coefficient K in the girder-tower-only FE model, the stiffness proportion of the main girder, the tower or the cable subsystem in the whole structural system could be adjusted according to the design intentions. The effectiveness of the proposed method is examined and demonstrated by one simple tutorial example and one self-anchored suspension bridge.展开更多
在英语中,“to+名词”常用在动词后,表达不同的意义。本文就常见的动词后“to+名词”的用法作--归纳。1.加强语气(1)to+a+名词常见的词语有to a close,to a word、to a hair、to a finish、to a fault,to a dot,to a miracle.等。例如:H...在英语中,“to+名词”常用在动词后,表达不同的意义。本文就常见的动词后“to+名词”的用法作--归纳。1.加强语气(1)to+a+名词常见的词语有to a close,to a word、to a hair、to a finish、to a fault,to a dot,to a miracle.等。例如:His life was drawing to a close.他的生命正走向终点。The story may sound strange,but it is true toa word.故事听起来尽管离奇,却是千真万确的。展开更多
A theoretical model of relationship between subsurface damage and surface roughness was established to realize rapid and non-destructive measurement of subsurface damage of ground optical materials.Postulated conditio...A theoretical model of relationship between subsurface damage and surface roughness was established to realize rapid and non-destructive measurement of subsurface damage of ground optical materials.Postulated condition of the model was that subsurface damage depth and peak-to-valley surface roughness are equal to depth of radial and lateral cracks in brittle surface induced by small-radius(radius≤200 μm)spherical indenter,respectively.And contribution of elastic stress field to the radial cracks propagation was also considered in the loading cycle.Subsurface damage depth of ground BK7 glasses was measured by magnetorheological finishing spot technique to validate theoretical ratio of subsurface damage to surface roughness.The results show that the ratio is directly proportional to load of abrasive grains and hardness of optical materials,while inversely proportional to granularity of abrasive grains and fracture toughness of optical materials.Moreover,the influence of the load and fracture toughness on the ratio is more significant than the granularity and hardness,respectively.The measured ratios of 80 grit and 120 grit fixed abrasive grinding of BK7 glasses are 5.8 and 5.4,respectively.展开更多
Based on the distribution characteristic of magnetic field along the polish wheel,the four-axis linkage technique is advanced to replace a standard five-axis one to figure low-gradient optical surfaces with a raster t...Based on the distribution characteristic of magnetic field along the polish wheel,the four-axis linkage technique is advanced to replace a standard five-axis one to figure low-gradient optical surfaces with a raster tool-path in magnetorheological finishing(MRF).After introducing the fundaments of such simplification,the figuring reachability of a four-axis system for the low-gradient optics was theoretically analyzed.Further validation including magnetic field intensity and influence function characteristic was performed to establish its application.To demonstrate the correctness,feasibility and applicability of such technique,a K4 spherical part was figured by two iterations of MRF with surface form error improved to 0.219λPV and 0.027λRMS.Meanwhile,the surface roughness was also improved a lot in MRF process.These theoretical analyses and experimental results both indicate that high form accuracy and excellent surface quality can be obtained by using the four-axis linkage technique in the process of figuring low-gradient optical elements,and the four-axis linkage system undoubtedly is much more easy to control and much more economical.展开更多
To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys, an abrasive film is used when superfinishing is performed under varying co...To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys, an abrasive film is used when superfinishing is performed under varying conditions. These conditions include the workpiece rotation speed, the oscillation speed, the contact pressure of the roller, the hardness of the roller, and the type of abrasive film. The superfinishing device is applied to polishing a thin and long cylindrical bar. A micro-finishing film and a lapping film were used as abrasive films. A1203 grains or SiC grains were used as abrasives. The surface roughness of a polished workpiece was measured using a stylus-type surface-roughness measuring instrument. As a result, the conditions to improve the polishing surface efficiently include high values for the workpiece rotation speed, oscillation speed and contact pressure. The roller hardness has no effect on the efficient polishing conditions. The mirror finish of a surface can be created using lapping film of 3 μm with Al2O3 grains after polishing to a steady surface roughness under the efficient polishing conditions.展开更多
This work presented the characteristics of two gear teeth finishing methods, due to the properties of gear teeth surface layer obtained at the tooth working depth. These methods are: 1) the teeth carburization, harden...This work presented the characteristics of two gear teeth finishing methods, due to the properties of gear teeth surface layer obtained at the tooth working depth. These methods are: 1) the teeth carburization, hardening to a hardness of HRC 60-62 and then grinding, 2) the soft gear shaving as the final mechanical treatment and then carburizing and hardening to the hardness of HRC60-62. This work included the test results of the contact fatigue strength carried out on the circulating power system. The Wohler curves were plotted due to the obtained results, as the basis for the practical evaluation of the considered gear finishing methods. The parameters like volume distribution of the voids, content of the retained austenite, compressive residual stress value, but also the results of contact fatigue strength tests, are more favorable for the teeth shaving method than for the teeth grinding method.展开更多
Prediction of surface finish in turning process is a difficult but important task. Artificial Neural Networks (ANN) can reliably pred ict the surface finish but require a lot of training data. To overcome this prob le...Prediction of surface finish in turning process is a difficult but important task. Artificial Neural Networks (ANN) can reliably pred ict the surface finish but require a lot of training data. To overcome this prob lem, an expert system approach is proposed, wherein it will be possible to predi ct the surface finish from limited experiments. The expert system contains a kno wledge base prepared from machining data handbooks and number of experiments con ducted by turning steel rods, over a wide range of cutting parameters. With this knowledge base, the expert system predicts surface finish for different tool-w ork-piece combinations, by carrying out few experiments for each case. The prop osed expert system model is validated by carrying out a number of experiments.展开更多
This research has successfully developed an advance d manufacturing system for 300mm silicon wafer,using fixed abrasive instead o f conventional free slurry,to provide a totally integrated solution for achievi ng the ...This research has successfully developed an advance d manufacturing system for 300mm silicon wafer,using fixed abrasive instead o f conventional free slurry,to provide a totally integrated solution for achievi ng the surface roughness Ra<1 nm(Ry<5～6 nm) and the global flatness<O.2μm /300 mm.In addition to high throughput rate,this system significantly reduc es the total energy consumption by 70%,compared with the current process used for 200mm Si wafer.This paper describes the principle of material removal,st ate-of-the-art technologies and kinematical analysis for one-stop finishing o f 300mm Si wafer by fixed abrasive process.展开更多
A total of 60 crossbred(Large White×Landrace) pigs of halothane genotype NN(castrated males and females) were allotted to three treatments:3 h lairage with toys,3 h lairage and 0 h lairage in a randomized complet...A total of 60 crossbred(Large White×Landrace) pigs of halothane genotype NN(castrated males and females) were allotted to three treatments:3 h lairage with toys,3 h lairage and 0 h lairage in a randomized complete block design and used to evaluate the influence of lairage conditions on behavior, biochemical indicators and meat quality for finishing pigs at slaughter.Behavior of the pigs was scored subjectively during lairage.Blood samples were taken at exsanguination s to measure blood temperature, plasma Cortisol,ACTH,glucose,lactate,plasma enzymes and hematological indices.Post-mortem meat quality measurements included muscle colour value(MCV),electrical conductivity(EC),pH at 45 min and 24 h from Longissimus thoracis(LM) and Semimembranosus(SM) mucles and drip loss from LM. The results showed that 3 h lairage group with toys demonstrated significantly improved behavior than the group without toys at 3 sampling times.All the pigs showed increasing calmness as the time of lairage progressed.The omission of lairage increased plasma Cortisol,ACTH,glucose and lactate(P【0.05),and decreased plasma lactate dehydrogenase(LDH),and creatine kinase(CK)(P【0.05).No biochemical index was influenced by the presence or absence of toys during lairage(P【0.05).Muscle colour value, electrical conductivity,pH at 45 min and 24 h from LM and SM and drip loss were not affected by any treatment(P【0.05).Pigs provided 3 h lairage,with or without toys,exhibited lower red blood cell(RBC), hemoglobin(HGB),and haematocrit(HCT) when compared to 0 h lairage.3 h lairage with or without toys resulted in higher white blood cell(WBC) and lymphocyte(W-SCC) levels than 0 h lairage.None of the hemocytic indices in pigs given lairage was affected by the presence or absence of toys.We conclude from this pilot study that in local commercial conditions,from the point of view of animal welfare and meat quality,lairage time of 3 h after short travel was beneficial.Pigs resting showed increased relief from stress and a recovery in immune competence.Holding pigs in lairage with toys for a few hours after arrival at the abattoir may be beneficial for the animal’s well-being.展开更多
第19届世界表面精饰大会（Interfinish 2016）将于2016年9月20-22日在北京国家会议中心举行。会议由国际表面精饰联盟（International Union for Surface Finishing,IUSF）主办,中国表面工程协会承办,主题为“面向未来工业的表面科学与...第19届世界表面精饰大会（Interfinish 2016）将于2016年9月20-22日在北京国家会议中心举行。会议由国际表面精饰联盟（International Union for Surface Finishing,IUSF）主办,中国表面工程协会承办,主题为“面向未来工业的表面科学与工程”。大会将邀请国内外知名专家、学者就表面工程领域的热点问题进行交流。会议现面向各大专院校、科研院所、公司企业征集表面工程领域的优秀论文（语言为英文）。展开更多
Magnetic liquid can produce alternative internal pressure under the alternative high-frequency gradient magnetic field.Because it has higher bulk modulus,the internal pressure results in its volume change.Using piezoe...Magnetic liquid can produce alternative internal pressure under the alternative high-frequency gradient magnetic field.Because it has higher bulk modulus,the internal pressure results in its volume change.Using piezoelectric transducers,the ultrasonic wave generated by the vibration of magnetic liquids can be detected,which shows that the magnetic liquids have the magnetostrictive effect and can generate the ultrasonic vibration under the alternative magnetic gradient field.Some nonmagnetic abrasives and rust-proofing agents can be mixed into the magnetic liquids,under the alternative magnetic field,the abrasives held by magnetic liquids grind the surface of the workpieces,and thus,the finishing for the surface with complex shape,mold cavity and inner wall of tiny tubes can be realized.展开更多
The effect of surface finish and annealing treatment on the oxidation behavior of Ti-48Al-8Cr-2Ag (molar fraction, %) alloy was investigated at 900 and 1 000 ℃, respectively in air. Thermal gravimetric analysis (TGA)...The effect of surface finish and annealing treatment on the oxidation behavior of Ti-48Al-8Cr-2Ag (molar fraction, %) alloy was investigated at 900 and 1 000 ℃, respectively in air. Thermal gravimetric analysis (TGA) was conducted for the characterization of oxidation kinetics. The microstructures of oxide scales were studied by scanning electron microscopy (SEM) and transmission election microscopy (TEM) techniques. Unfavorable effect of the annealing treatment on the oxidation behavior of the coating was also investigated. The results indicate that the oxidation behavior of the alloy is influenced by surface finish and annealing treatment. The oxidation rate of ground sample is lower than that of the polished alloy at 1 000 ℃ in air. The former forms a scale of merely Al2O3, and the latter forms a scale of the mixture of Al2O3 and TiO2. Annealing can improve the formation of TiO2.展开更多
An experiment was conducted to study the response of broiler to diet dilution during the finishing period. Sixty 29-day-old commercial Avian male broiler chicks were assigned to two groups randomly, with 30 broilers e...An experiment was conducted to study the response of broiler to diet dilution during the finishing period. Sixty 29-day-old commercial Avian male broiler chicks were assigned to two groups randomly, with 30 broilers each. Birds were offered a conventional finishing diet or with 10% dilution diet with ground rice hulls from 29 to 49 days of age. The result showed that there were no significant differences between the effects of diet dilution and the control on final body weight, growth rate and feed conversion efficiency. Diet dilution led to a reduction in abdominal fat weight, whereas carcass and breast muscle weight were not affected.展开更多
The predictive model of surface roughness of the spiral bevel gear (SBG) tooth based on the least square support vector machine (LSSVM) was proposed.A nonlinear LSSVM model with radial basis function (RBF) kernel was ...The predictive model of surface roughness of the spiral bevel gear (SBG) tooth based on the least square support vector machine (LSSVM) was proposed.A nonlinear LSSVM model with radial basis function (RBF) kernel was presented and then the experimental setup of PECF system was established.The Taguchi method was introduced to assess the effect of finishing parameters on the gear tooth surface roughness,and the training data was also obtained through experiments.The comparison between the predicted values and the experimental values under the same conditions was carried out.The results show that the predicted values are found to be approximately consistent with the experimental values.The mean absolute percent error (MAPE) is 2.43% for the surface roughness and 2.61% for the applied voltage.展开更多
中国（国际）光整加工技术及表面工程学术会议（International Conference on Surface Finishing Technology and Surface Engineering，ICSFT）是由中国机械工程学会生产工程分会光整加工专业委员会主办的系列学术会议之一，每两年举...中国（国际）光整加工技术及表面工程学术会议（International Conference on Surface Finishing Technology and Surface Engineering，ICSFT）是由中国机械工程学会生产工程分会光整加工专业委员会主办的系列学术会议之一，每两年举办一次。2018年中国（国际）光整加工技术及表面工程学术会议暨2018年高性能零件光整加工技术产学研论坛定于2018年7月19—22日在贵州省贵阳市召开。展开更多
Through the analysis of the problem that the gear de-closing mechanism of the horizontal-vertical con-vertible rolling mill is difficult to disengage, sometimes automatically disengages from work ,and its binding slee...Through the analysis of the problem that the gear de-closing mechanism of the horizontal-vertical con-vertible rolling mill is difficult to disengage, sometimes automatically disengages from work ,and its binding sleevewears serious etc, and combined with the hydraulic system, the cause of the problem is find . Then the hydraulicsystem of the mill is improved. The practical results show that the problem has obviously improved, maintenanceman-hours and spare parts cost is reduced, the production efficiency is improved.展开更多
基金Project(20133204120015) supported by Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject(12KJB560003) supported by the Natural Science Foundation of the Higher Education Institution of Jiangsu Province,China
文摘A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. The initial hanger tensions are first obtained through an iterative analysis by combining the girder-tower-only finite element(FE) model with the analytical program for shape finding of the spatial cable system. These initial hanger tensions, together with the corresponding cable coordinates and internal forces, are then included into the FE model of the total bridge system, the nonlinear analysis of which involves the optimization technique. Calculations are repeated until the optimization algorithm converges to the most optimal hanger tensions(i.e. the desired reasonable finished bridge state). The "temperature rigid arm" is introduced to offset the unavoidable initial deformations of the girder and tower, which are due to the huge axial forces originated from the main cable. Moreover, by changing the stiffness coefficient K in the girder-tower-only FE model, the stiffness proportion of the main girder, the tower or the cable subsystem in the whole structural system could be adjusted according to the design intentions. The effectiveness of the proposed method is examined and demonstrated by one simple tutorial example and one self-anchored suspension bridge.
文摘在英语中,“to+名词”常用在动词后,表达不同的意义。本文就常见的动词后“to+名词”的用法作--归纳。1.加强语气(1)to+a+名词常见的词语有to a close,to a word、to a hair、to a finish、to a fault,to a dot,to a miracle.等。例如:His life was drawing to a close.他的生命正走向终点。The story may sound strange,but it is true toa word.故事听起来尽管离奇,却是千真万确的。
基金Project(50375156) supported by the National Natural Science Foundation of China
文摘A theoretical model of relationship between subsurface damage and surface roughness was established to realize rapid and non-destructive measurement of subsurface damage of ground optical materials.Postulated condition of the model was that subsurface damage depth and peak-to-valley surface roughness are equal to depth of radial and lateral cracks in brittle surface induced by small-radius(radius≤200 μm)spherical indenter,respectively.And contribution of elastic stress field to the radial cracks propagation was also considered in the loading cycle.Subsurface damage depth of ground BK7 glasses was measured by magnetorheological finishing spot technique to validate theoretical ratio of subsurface damage to surface roughness.The results show that the ratio is directly proportional to load of abrasive grains and hardness of optical materials,while inversely proportional to granularity of abrasive grains and fracture toughness of optical materials.Moreover,the influence of the load and fracture toughness on the ratio is more significant than the granularity and hardness,respectively.The measured ratios of 80 grit and 120 grit fixed abrasive grinding of BK7 glasses are 5.8 and 5.4,respectively.
基金Project(91023042)supported by the National Natural Science Foundation of ChinaProject(2011CB013200)supported by the National Basic Research Program of China+1 种基金Project(B090302)supported by the Fund of Innovation,Graduate School of National University of Defense Technology,ChinaProject(CX2009B004)supported by the Hunan Provincial Innovation Foundation for Postgraduate,China
文摘Based on the distribution characteristic of magnetic field along the polish wheel,the four-axis linkage technique is advanced to replace a standard five-axis one to figure low-gradient optical surfaces with a raster tool-path in magnetorheological finishing(MRF).After introducing the fundaments of such simplification,the figuring reachability of a four-axis system for the low-gradient optics was theoretically analyzed.Further validation including magnetic field intensity and influence function characteristic was performed to establish its application.To demonstrate the correctness,feasibility and applicability of such technique,a K4 spherical part was figured by two iterations of MRF with surface form error improved to 0.219λPV and 0.027λRMS.Meanwhile,the surface roughness was also improved a lot in MRF process.These theoretical analyses and experimental results both indicate that high form accuracy and excellent surface quality can be obtained by using the four-axis linkage technique in the process of figuring low-gradient optical elements,and the four-axis linkage system undoubtedly is much more easy to control and much more economical.
基金work supported by the Second Stage of Brain Korea 21 Projects of Korea
文摘To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys, an abrasive film is used when superfinishing is performed under varying conditions. These conditions include the workpiece rotation speed, the oscillation speed, the contact pressure of the roller, the hardness of the roller, and the type of abrasive film. The superfinishing device is applied to polishing a thin and long cylindrical bar. A micro-finishing film and a lapping film were used as abrasive films. A1203 grains or SiC grains were used as abrasives. The surface roughness of a polished workpiece was measured using a stylus-type surface-roughness measuring instrument. As a result, the conditions to improve the polishing surface efficiently include high values for the workpiece rotation speed, oscillation speed and contact pressure. The roller hardness has no effect on the efficient polishing conditions. The mirror finish of a surface can be created using lapping film of 3 μm with Al2O3 grains after polishing to a steady surface roughness under the efficient polishing conditions.
文摘This work presented the characteristics of two gear teeth finishing methods, due to the properties of gear teeth surface layer obtained at the tooth working depth. These methods are: 1) the teeth carburization, hardening to a hardness of HRC 60-62 and then grinding, 2) the soft gear shaving as the final mechanical treatment and then carburizing and hardening to the hardness of HRC60-62. This work included the test results of the contact fatigue strength carried out on the circulating power system. The Wohler curves were plotted due to the obtained results, as the basis for the practical evaluation of the considered gear finishing methods. The parameters like volume distribution of the voids, content of the retained austenite, compressive residual stress value, but also the results of contact fatigue strength tests, are more favorable for the teeth shaving method than for the teeth grinding method.
文摘Prediction of surface finish in turning process is a difficult but important task. Artificial Neural Networks (ANN) can reliably pred ict the surface finish but require a lot of training data. To overcome this prob lem, an expert system approach is proposed, wherein it will be possible to predi ct the surface finish from limited experiments. The expert system contains a kno wledge base prepared from machining data handbooks and number of experiments con ducted by turning steel rods, over a wide range of cutting parameters. With this knowledge base, the expert system predicts surface finish for different tool-w ork-piece combinations, by carrying out few experiments for each case. The prop osed expert system model is validated by carrying out a number of experiments.
文摘This research has successfully developed an advance d manufacturing system for 300mm silicon wafer,using fixed abrasive instead o f conventional free slurry,to provide a totally integrated solution for achievi ng the surface roughness Ra<1 nm(Ry<5～6 nm) and the global flatness<O.2μm /300 mm.In addition to high throughput rate,this system significantly reduc es the total energy consumption by 70%,compared with the current process used for 200mm Si wafer.This paper describes the principle of material removal,st ate-of-the-art technologies and kinematical analysis for one-stop finishing o f 300mm Si wafer by fixed abrasive process.
基金supported financially by the project‘Research and Development on Technology and Key Equipment for New Type of Industrialized and Healthy Animal Husbandry'funded by the Chinese Ministry of Science and Technology(2006BAD 14B02-6)11th Five Years Key Programs for Science and Technology Development of China(2006BAD01A08-07)+1 种基金Hubei Province Key Project of Science and Technology (2006AA201B24)Wuhan City Key Project of Industrialization(200720112026)
文摘A total of 60 crossbred(Large White×Landrace) pigs of halothane genotype NN(castrated males and females) were allotted to three treatments:3 h lairage with toys,3 h lairage and 0 h lairage in a randomized complete block design and used to evaluate the influence of lairage conditions on behavior, biochemical indicators and meat quality for finishing pigs at slaughter.Behavior of the pigs was scored subjectively during lairage.Blood samples were taken at exsanguination s to measure blood temperature, plasma Cortisol,ACTH,glucose,lactate,plasma enzymes and hematological indices.Post-mortem meat quality measurements included muscle colour value(MCV),electrical conductivity(EC),pH at 45 min and 24 h from Longissimus thoracis(LM) and Semimembranosus(SM) mucles and drip loss from LM. The results showed that 3 h lairage group with toys demonstrated significantly improved behavior than the group without toys at 3 sampling times.All the pigs showed increasing calmness as the time of lairage progressed.The omission of lairage increased plasma Cortisol,ACTH,glucose and lactate(P【0.05),and decreased plasma lactate dehydrogenase(LDH),and creatine kinase(CK)(P【0.05).No biochemical index was influenced by the presence or absence of toys during lairage(P【0.05).Muscle colour value, electrical conductivity,pH at 45 min and 24 h from LM and SM and drip loss were not affected by any treatment(P【0.05).Pigs provided 3 h lairage,with or without toys,exhibited lower red blood cell(RBC), hemoglobin(HGB),and haematocrit(HCT) when compared to 0 h lairage.3 h lairage with or without toys resulted in higher white blood cell(WBC) and lymphocyte(W-SCC) levels than 0 h lairage.None of the hemocytic indices in pigs given lairage was affected by the presence or absence of toys.We conclude from this pilot study that in local commercial conditions,from the point of view of animal welfare and meat quality,lairage time of 3 h after short travel was beneficial.Pigs resting showed increased relief from stress and a recovery in immune competence.Holding pigs in lairage with toys for a few hours after arrival at the abattoir may be beneficial for the animal’s well-being.
文摘第19届世界表面精饰大会（Interfinish 2016）将于2016年9月20-22日在北京国家会议中心举行。会议由国际表面精饰联盟（International Union for Surface Finishing,IUSF）主办,中国表面工程协会承办,主题为“面向未来工业的表面科学与工程”。大会将邀请国内外知名专家、学者就表面工程领域的热点问题进行交流。会议现面向各大专院校、科研院所、公司企业征集表面工程领域的优秀论文（语言为英文）。
基金Sponsored by Zhejiang Province Scientific and Technological Key Task Program (2007C21025)Ningbo Science and Technological Key Task Program (2007B10010)
文摘Magnetic liquid can produce alternative internal pressure under the alternative high-frequency gradient magnetic field.Because it has higher bulk modulus,the internal pressure results in its volume change.Using piezoelectric transducers,the ultrasonic wave generated by the vibration of magnetic liquids can be detected,which shows that the magnetic liquids have the magnetostrictive effect and can generate the ultrasonic vibration under the alternative magnetic gradient field.Some nonmagnetic abrasives and rust-proofing agents can be mixed into the magnetic liquids,under the alternative magnetic field,the abrasives held by magnetic liquids grind the surface of the workpieces,and thus,the finishing for the surface with complex shape,mold cavity and inner wall of tiny tubes can be realized.
基金Project(2007430028) supported by the Science and Technique Foundation of Henan Educational Committee, China
文摘The effect of surface finish and annealing treatment on the oxidation behavior of Ti-48Al-8Cr-2Ag (molar fraction, %) alloy was investigated at 900 and 1 000 ℃, respectively in air. Thermal gravimetric analysis (TGA) was conducted for the characterization of oxidation kinetics. The microstructures of oxide scales were studied by scanning electron microscopy (SEM) and transmission election microscopy (TEM) techniques. Unfavorable effect of the annealing treatment on the oxidation behavior of the coating was also investigated. The results indicate that the oxidation behavior of the alloy is influenced by surface finish and annealing treatment. The oxidation rate of ground sample is lower than that of the polished alloy at 1 000 ℃ in air. The former forms a scale of merely Al2O3, and the latter forms a scale of the mixture of Al2O3 and TiO2. Annealing can improve the formation of TiO2.
基金National Basic Research Program of China (2004CB11750-5)
文摘An experiment was conducted to study the response of broiler to diet dilution during the finishing period. Sixty 29-day-old commercial Avian male broiler chicks were assigned to two groups randomly, with 30 broilers each. Birds were offered a conventional finishing diet or with 10% dilution diet with ground rice hulls from 29 to 49 days of age. The result showed that there were no significant differences between the effects of diet dilution and the control on final body weight, growth rate and feed conversion efficiency. Diet dilution led to a reduction in abdominal fat weight, whereas carcass and breast muscle weight were not affected.
基金Project(90923022) supported by the National Natural Science Foundation of ChinaProject(2009220022) supported by Liaoning Science and Technology Foundation,China
文摘The predictive model of surface roughness of the spiral bevel gear (SBG) tooth based on the least square support vector machine (LSSVM) was proposed.A nonlinear LSSVM model with radial basis function (RBF) kernel was presented and then the experimental setup of PECF system was established.The Taguchi method was introduced to assess the effect of finishing parameters on the gear tooth surface roughness,and the training data was also obtained through experiments.The comparison between the predicted values and the experimental values under the same conditions was carried out.The results show that the predicted values are found to be approximately consistent with the experimental values.The mean absolute percent error (MAPE) is 2.43% for the surface roughness and 2.61% for the applied voltage.
文摘中国（国际）光整加工技术及表面工程学术会议（International Conference on Surface Finishing Technology and Surface Engineering，ICSFT）是由中国机械工程学会生产工程分会光整加工专业委员会主办的系列学术会议之一，每两年举办一次。2018年中国（国际）光整加工技术及表面工程学术会议暨2018年高性能零件光整加工技术产学研论坛定于2018年7月19—22日在贵州省贵阳市召开。
文摘Through the analysis of the problem that the gear de-closing mechanism of the horizontal-vertical con-vertible rolling mill is difficult to disengage, sometimes automatically disengages from work ,and its binding sleevewears serious etc, and combined with the hydraulic system, the cause of the problem is find . Then the hydraulicsystem of the mill is improved. The practical results show that the problem has obviously improved, maintenanceman-hours and spare parts cost is reduced, the production efficiency is improved.
