A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of ...A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of CFS is subjected to unknown load characteristics of rock or soil; in addition,the geological condition is time-varying.Due to the complex load characteristics of rock or soil,the feeding velocity of TC is related to geological conditions.What is worse,its dynamic model is subjected to uncertainties and its function is unknown.To deal with the particular characteristics of CFS,a novel adaptive fuzzy integral sliding mode control(AFISMC) was designed for feeding pressure control of CFS,which combines the robust characteristics of an integral sliding mode controller and the adaptive adjusting characteristics of an adaptive fuzzy controller.The AFISMC feeding pressure controller is synthesized using the backstepping technique.The stability of the overall closed-loop system consisting of the adaptive fuzzy inference system,integral sliding mode controller and the cutter feeding system is proved using Lyapunov theory.Experiments are conducted on a TC test bench with the AFISMC under different operating conditions.The experimental results demonstrate that the proposed AFISMC feeding pressure controller for CFS gives a superior and robust pressure tracking performance with maximum pressure tracking error within ?0.3 MPa.展开更多
In order to utilize the spontaneous accumulation of heat (SAH) reasonably and obtain the high quality sinter with low energy consumption, a lower fuel consumption modeling based on raw materials of a certain steel wor...In order to utilize the spontaneous accumulation of heat (SAH) reasonably and obtain the high quality sinter with low energy consumption, a lower fuel consumption modeling based on raw materials of a certain steel works was built. An air-flow segregation feeding (ASF) experimental equipment was designed to simulate strand feeding process and calculate the lower fuel consumption quantity. Compared with baseline test, the ASF experimental equipment was adopted. The results of sinter pot tests show that the solid fuel consumption is lower than that in baseline test, which is decreased by 5.8%. Meanwhile, other sinter indexes, such as pan yeild, tumbler strength and strand productivity are improved. The mineralogical examination indicates that the mineral compositions and micostructures are improved in sinter.展开更多
Blaptostethus pallescens Poppius (Heteroptera:Anthocoridae),which is amenable to mass rearing,has proved to be a potential predator of sucking pests like mites and thrips.Recently,the cotton mealybug Phenacoccus solen...Blaptostethus pallescens Poppius (Heteroptera:Anthocoridae),which is amenable to mass rearing,has proved to be a potential predator of sucking pests like mites and thrips.Recently,the cotton mealybug Phenacoccus solenopsis Tinsley emerged as a serious pest on cotton in India.Laboratory studies indicated that B.pallescens could feed on the cotton mealybug.Hence,further investigations were conducted to understand the stage of the predator which is most potential and the pest stage preferred by the predator.Mature nymphs and adults of B.pallescens could predate equally well on the neonates of cotton mealybug.Young (three to four-day-old) nymphs of the predator could not feed on any stage of the cotton mealybug.Mature nymphs (seven-day-old and above) and adults could effectively predate on both young and mature cotton mealybug crawlers,though preference was more for the younger crawlers.However,nymphs and adults of B.pallescens could not predate on the adult stage of the mealybug.Different predator:pest ratios were tested in cage studies and it emerged that B.pallescens adults released against the mealybug crawlers at a ratio of 1:5 and nymphal release at 1:10 caused maximum mortality of the mealybug crawlers.Considering the fast multiplication rate of cotton mealybug and the large number of predators which have to be released to manage them,further detailed studies are necessary on utilizing B.pallescens to target the neonates and younger stages of the cotton mealybug in field conditions.展开更多
Four-factor and three-level orthogonal experimental design(L9(34))was used in the experiment.The effects of three genotypes:Germany SAB three-bred-cross rabbits(S2),New Zealand purebred(N),and crossbred rabbits(ON);th...Four-factor and three-level orthogonal experimental design(L9(34))was used in the experiment.The effects of three genotypes:Germany SAB three-bred-cross rabbits(S2),New Zealand purebred(N),and crossbred rabbits(ON);three levels of Clenbuterol treatment: 1 ng.g-1,2 ng.g-1and 3 ng.g-1,and three feeding methods:5-day,7-day and 10-day withdrawal period after two weeks of feeding Clenbuterol(CL)on bodyweight gain were evaluated.CL apparently improved average daily gain(ADG)of rabbits.70-day ADG of 5-day and 10-day withdrawal were higher than that of 7-day withdrawal,70-day ADG of S2 genotype was significantly higher than that of the control and N genotype was significant.Genotype,additive dose and feeding method had significant effects on overall-stage ADG.ON genotype,2 ng.g-1 dose and 5-day withdrawal feeding method was the best.Responses of different genotype to Clenbuterol appeared different at experimental prophase or whole experimental period.展开更多
The Wesel-Xanten stretch of the fiver Rhine between km-812.5 and km-821.5 is one of the reaches where strong erosion leads to high maintenance efforts conceming navigability.In order to improve the naviga- tion condit...The Wesel-Xanten stretch of the fiver Rhine between km-812.5 and km-821.5 is one of the reaches where strong erosion leads to high maintenance efforts conceming navigability.In order to improve the naviga- tion conditions without aggravating the flood protection,but also ensuring that the ecological system of the river is not damaged,investigations of the morphodynamical processes in connection with artificial grain feeding ac- tivities have to be carried out by Federal Waterways Engineering and Research...展开更多
The aims of this study were to achieve working stability and continuity of the straw fibre extruder(D200)to improve the transportation efficiency of pretreated straw materials mulch film.Based on a theoretical analysi...The aims of this study were to achieve working stability and continuity of the straw fibre extruder(D200)to improve the transportation efficiency of pretreated straw materials mulch film.Based on a theoretical analysis of wheat straw friction characteristics and the mechanics model of wheat straw transport,a tilting variable-diameter spiral feeding device matched the designed straw fibre extruder(D200-type).Experimental researches were performed by using the orthogonal test method of the L16(45)to obtain the optimal parameter combination.The spiral angle,the speed of the screw shaft and the moisture content of straw raw materials were selected as influencing factors,and feeding efficiency was selected as the objective indicator.The results showed that the spiral angle,the rotating speed of screw shaft and the moisture content of straw raw materials had very significant effects on the feeding efficiency(p<0.01).The order of the extent of the influence of parameters on the feeding efficiency of wheat straw raw materials from high to low was the moisture content,the spiral angle and the speed of screw shaft.When the maximum transfer efficiency per unit time of the inclined spiral feeding device was 1040.8 kg·h-1,the spiral angle was 40?,the speed of screw shaft was 200 r·min-1 and the moisture content was 65%.Verification experiment proved the feasibility of straw fibre extruder designed.展开更多
Feeding rhythm of common carp was investigated from 4℃ to 34℃. The results indicated that there was a diel feeding rhythm for both adult （630-850 g） and youth （61-91 g） at all tested temperatures. There were two...Feeding rhythm of common carp was investigated from 4℃ to 34℃. The results indicated that there was a diel feeding rhythm for both adult （630-850 g） and youth （61-91 g） at all tested temperatures. There were two main activity peaks at 8：00-11：00 a.m. and 19：00-23：00 p.m., during which feeding quantities were 10.68%-32.53% and 16.25%-33.41% of the daily intake, respectively. When water temperature dropped to below 10℃, the feeding peak concentrated at 8：00-11：00 a.m. and 19：00 p.m. to 4：00 a.m. At 6℃, though both adult and youth would still feed, the feeding quantities were only 0.01% and 0.35% of body mass. Daily feeding rate of adult and youth reached 1.21% and 2.63% at 14℃, respectively. Both adult and youth carps reached the maximum daily feeding rate at 28℃, being 2.84% and 12.06% of body mass, respectively. The daily feeding rate of adult and youth reduced suddenly after at 34℃, and the daily feeding rate was only 0.74% and 9.45% of body mass, respectively. There was significant difference in daily feeding rate at different water temperatures （P〈0.05）.展开更多
In this paper a method for simultaneous determination of 6 antioxidants (PG,TBHQ,BHA,OG,DG and NDGA) in animal feed by HPLC-MS/MS was described.The samples were extracted by acetonitrile and cleaned up with auto solid...In this paper a method for simultaneous determination of 6 antioxidants (PG,TBHQ,BHA,OG,DG and NDGA) in animal feed by HPLC-MS/MS was described.The samples were extracted by acetonitrile and cleaned up with auto solid phase extraction.The samples were separated by HPLC with a C8 column.The electrospray (ESI) negative mode detected by MRM is used for MS/MS.The detection limits were 2 mg/kg,recoveries and RSDs were 84%-106% and 3.0%-9.0% at this concentration respectively.The method was highly efficient and sensitive,stable and precise.展开更多
A new LC-MS method has been established for determination of momoiodotyrosine(MIT) and diiodotyrosine(DIT) in the hydrolysate of premix feeds.Samples was hydrolyzed with 4.0 mol·L-1 NaOH for 16 h at 110 ℃,then t...A new LC-MS method has been established for determination of momoiodotyrosine(MIT) and diiodotyrosine(DIT) in the hydrolysate of premix feeds.Samples was hydrolyzed with 4.0 mol·L-1 NaOH for 16 h at 110 ℃,then the hydrolysate was cleaned up with a SPE cartridge and injected directly for LC-MS analysis.Chromatographic separation was performed on a 2.1 mm×150 mm,5 μm particle,C18 column with a mixture of acetonitrile and 0.1%(by volume) acetic acid as mobile phase at a flow rate of 0.2 mL· min-1.ESI+ mass spectrometry detection was run on SIR mode with m/z 308,262 for MIT,and m/z 434,388 for DIT.Quantification was carried out with external standard method.Validation data indicated the method was linear in the concentration ranges investigated with regression coefficients(R2) of more than 0.99.The limits of detection(LOD) were 8 μg·L-1 and limits of quantification(LOQ) were 30 μg·L-1.The recoveries were range of 93%-110% with relative standard deviations of 6.5%-13.2%.The method was sensitive,accurate,and was applied in the determination of MIT and DIT in real sample with satisfactory results.展开更多
Rock burst is a kind of geological disaster in rock excavation of high stress areas.To evaluate intensity of rock burst,the maximum shear stress,uniaxial compressive strength,uniaxial tensile strength and rock elastic...Rock burst is a kind of geological disaster in rock excavation of high stress areas.To evaluate intensity of rock burst,the maximum shear stress,uniaxial compressive strength,uniaxial tensile strength and rock elastic energy index were selected as input factors,and burst pit depth as output factor.The rock burst prediction model was proposed according to the genetic algorithms and extreme learning machine.The effect of structural surface was taken into consideration.Based on the engineering examples of tunnels,the observed and collected data were divided into the training set,validation set and prediction set.The training set and validation set were used to train and optimize the model.Parameter optimization results are presented.The hidden layer node was450,and the fitness of the predictions was 0.0197 under the optimal combination of the input weight and offset vector.Then,the optimized model is tested with the prediction set.Results show that the proposed model is effective.The maximum relative error is4.71%,and the average relative error is 3.20%,which proves that the model has practical value in the relative engineering.展开更多
基金Project(2012AA041801)supported by the High-tech Research and Development Program of China
文摘A nonlinear pressure controller was presented to track desired feeding pressure for the cutter feeding system(CFS) of trench cutter(TC) in the presence of unknown external disturbances.The feeding pressure control of CFS is subjected to unknown load characteristics of rock or soil; in addition,the geological condition is time-varying.Due to the complex load characteristics of rock or soil,the feeding velocity of TC is related to geological conditions.What is worse,its dynamic model is subjected to uncertainties and its function is unknown.To deal with the particular characteristics of CFS,a novel adaptive fuzzy integral sliding mode control(AFISMC) was designed for feeding pressure control of CFS,which combines the robust characteristics of an integral sliding mode controller and the adaptive adjusting characteristics of an adaptive fuzzy controller.The AFISMC feeding pressure controller is synthesized using the backstepping technique.The stability of the overall closed-loop system consisting of the adaptive fuzzy inference system,integral sliding mode controller and the cutter feeding system is proved using Lyapunov theory.Experiments are conducted on a TC test bench with the AFISMC under different operating conditions.The experimental results demonstrate that the proposed AFISMC feeding pressure controller for CFS gives a superior and robust pressure tracking performance with maximum pressure tracking error within ?0.3 MPa.
基金Project(NECT-04-0748) supported by New Century Excellent Talents Program of China
文摘In order to utilize the spontaneous accumulation of heat (SAH) reasonably and obtain the high quality sinter with low energy consumption, a lower fuel consumption modeling based on raw materials of a certain steel works was built. An air-flow segregation feeding (ASF) experimental equipment was designed to simulate strand feeding process and calculate the lower fuel consumption quantity. Compared with baseline test, the ASF experimental equipment was adopted. The results of sinter pot tests show that the solid fuel consumption is lower than that in baseline test, which is decreased by 5.8%. Meanwhile, other sinter indexes, such as pan yeild, tumbler strength and strand productivity are improved. The mineralogical examination indicates that the mineral compositions and micostructures are improved in sinter.
基金financial support extended by the Cotton Mission Mode project TMC MM1 3. 3
文摘Blaptostethus pallescens Poppius (Heteroptera:Anthocoridae),which is amenable to mass rearing,has proved to be a potential predator of sucking pests like mites and thrips.Recently,the cotton mealybug Phenacoccus solenopsis Tinsley emerged as a serious pest on cotton in India.Laboratory studies indicated that B.pallescens could feed on the cotton mealybug.Hence,further investigations were conducted to understand the stage of the predator which is most potential and the pest stage preferred by the predator.Mature nymphs and adults of B.pallescens could predate equally well on the neonates of cotton mealybug.Young (three to four-day-old) nymphs of the predator could not feed on any stage of the cotton mealybug.Mature nymphs (seven-day-old and above) and adults could effectively predate on both young and mature cotton mealybug crawlers,though preference was more for the younger crawlers.However,nymphs and adults of B.pallescens could not predate on the adult stage of the mealybug.Different predator:pest ratios were tested in cage studies and it emerged that B.pallescens adults released against the mealybug crawlers at a ratio of 1:5 and nymphal release at 1:10 caused maximum mortality of the mealybug crawlers.Considering the fast multiplication rate of cotton mealybug and the large number of predators which have to be released to manage them,further detailed studies are necessary on utilizing B.pallescens to target the neonates and younger stages of the cotton mealybug in field conditions.
文摘Four-factor and three-level orthogonal experimental design(L9(34))was used in the experiment.The effects of three genotypes:Germany SAB three-bred-cross rabbits(S2),New Zealand purebred(N),and crossbred rabbits(ON);three levels of Clenbuterol treatment: 1 ng.g-1,2 ng.g-1and 3 ng.g-1,and three feeding methods:5-day,7-day and 10-day withdrawal period after two weeks of feeding Clenbuterol(CL)on bodyweight gain were evaluated.CL apparently improved average daily gain(ADG)of rabbits.70-day ADG of 5-day and 10-day withdrawal were higher than that of 7-day withdrawal,70-day ADG of S2 genotype was significantly higher than that of the control and N genotype was significant.Genotype,additive dose and feeding method had significant effects on overall-stage ADG.ON genotype,2 ng.g-1 dose and 5-day withdrawal feeding method was the best.Responses of different genotype to Clenbuterol appeared different at experimental prophase or whole experimental period.
文摘The Wesel-Xanten stretch of the fiver Rhine between km-812.5 and km-821.5 is one of the reaches where strong erosion leads to high maintenance efforts conceming navigability.In order to improve the naviga- tion conditions without aggravating the flood protection,but also ensuring that the ecological system of the river is not damaged,investigations of the morphodynamical processes in connection with artificial grain feeding ac- tivities have to be carried out by Federal Waterways Engineering and Research...
基金Supported by Integrated Research and Demonstration of Chemical Fertilizer and Pesticide Reduction Technology for Soybean in Northeast China(2018YFD0201004)Funding from the Construction of Modern Agricultural Industrial Technology System(GARS-04)。
文摘The aims of this study were to achieve working stability and continuity of the straw fibre extruder(D200)to improve the transportation efficiency of pretreated straw materials mulch film.Based on a theoretical analysis of wheat straw friction characteristics and the mechanics model of wheat straw transport,a tilting variable-diameter spiral feeding device matched the designed straw fibre extruder(D200-type).Experimental researches were performed by using the orthogonal test method of the L16(45)to obtain the optimal parameter combination.The spiral angle,the speed of the screw shaft and the moisture content of straw raw materials were selected as influencing factors,and feeding efficiency was selected as the objective indicator.The results showed that the spiral angle,the rotating speed of screw shaft and the moisture content of straw raw materials had very significant effects on the feeding efficiency(p<0.01).The order of the extent of the influence of parameters on the feeding efficiency of wheat straw raw materials from high to low was the moisture content,the spiral angle and the speed of screw shaft.When the maximum transfer efficiency per unit time of the inclined spiral feeding device was 1040.8 kg·h-1,the spiral angle was 40?,the speed of screw shaft was 200 r·min-1 and the moisture content was 65%.Verification experiment proved the feasibility of straw fibre extruder designed.
文摘Feeding rhythm of common carp was investigated from 4℃ to 34℃. The results indicated that there was a diel feeding rhythm for both adult （630-850 g） and youth （61-91 g） at all tested temperatures. There were two main activity peaks at 8：00-11：00 a.m. and 19：00-23：00 p.m., during which feeding quantities were 10.68%-32.53% and 16.25%-33.41% of the daily intake, respectively. When water temperature dropped to below 10℃, the feeding peak concentrated at 8：00-11：00 a.m. and 19：00 p.m. to 4：00 a.m. At 6℃, though both adult and youth would still feed, the feeding quantities were only 0.01% and 0.35% of body mass. Daily feeding rate of adult and youth reached 1.21% and 2.63% at 14℃, respectively. Both adult and youth carps reached the maximum daily feeding rate at 28℃, being 2.84% and 12.06% of body mass, respectively. The daily feeding rate of adult and youth reduced suddenly after at 34℃, and the daily feeding rate was only 0.74% and 9.45% of body mass, respectively. There was significant difference in daily feeding rate at different water temperatures （P〈0.05）.
文摘In this paper a method for simultaneous determination of 6 antioxidants (PG,TBHQ,BHA,OG,DG and NDGA) in animal feed by HPLC-MS/MS was described.The samples were extracted by acetonitrile and cleaned up with auto solid phase extraction.The samples were separated by HPLC with a C8 column.The electrospray (ESI) negative mode detected by MRM is used for MS/MS.The detection limits were 2 mg/kg,recoveries and RSDs were 84%-106% and 3.0%-9.0% at this concentration respectively.The method was highly efficient and sensitive,stable and precise.
文摘A new LC-MS method has been established for determination of momoiodotyrosine(MIT) and diiodotyrosine(DIT) in the hydrolysate of premix feeds.Samples was hydrolyzed with 4.0 mol·L-1 NaOH for 16 h at 110 ℃,then the hydrolysate was cleaned up with a SPE cartridge and injected directly for LC-MS analysis.Chromatographic separation was performed on a 2.1 mm×150 mm,5 μm particle,C18 column with a mixture of acetonitrile and 0.1%(by volume) acetic acid as mobile phase at a flow rate of 0.2 mL· min-1.ESI+ mass spectrometry detection was run on SIR mode with m/z 308,262 for MIT,and m/z 434,388 for DIT.Quantification was carried out with external standard method.Validation data indicated the method was linear in the concentration ranges investigated with regression coefficients(R2) of more than 0.99.The limits of detection(LOD) were 8 μg·L-1 and limits of quantification(LOQ) were 30 μg·L-1.The recoveries were range of 93%-110% with relative standard deviations of 6.5%-13.2%.The method was sensitive,accurate,and was applied in the determination of MIT and DIT in real sample with satisfactory results.
基金Project(2013CB036004)supported by the National Basic Research Program of ChinaProject(51378510)supported by the National Natural Science Foundation of China
文摘Rock burst is a kind of geological disaster in rock excavation of high stress areas.To evaluate intensity of rock burst,the maximum shear stress,uniaxial compressive strength,uniaxial tensile strength and rock elastic energy index were selected as input factors,and burst pit depth as output factor.The rock burst prediction model was proposed according to the genetic algorithms and extreme learning machine.The effect of structural surface was taken into consideration.Based on the engineering examples of tunnels,the observed and collected data were divided into the training set,validation set and prediction set.The training set and validation set were used to train and optimize the model.Parameter optimization results are presented.The hidden layer node was450,and the fitness of the predictions was 0.0197 under the optimal combination of the input weight and offset vector.Then,the optimized model is tested with the prediction set.Results show that the proposed model is effective.The maximum relative error is4.71%,and the average relative error is 3.20%,which proves that the model has practical value in the relative engineering.
