The fusion of infrared and visible images should emphasize the salient targets in the infrared image while preserving the textural details of the visible images.To meet these requirements,an autoencoder-based method f...The fusion of infrared and visible images should emphasize the salient targets in the infrared image while preserving the textural details of the visible images.To meet these requirements,an autoencoder-based method for infrared and visible image fusion is proposed.The encoder designed according to the optimization objective consists of a base encoder and a detail encoder,which is used to extract low-frequency and high-frequency information from the image.This extraction may lead to some information not being captured,so a compensation encoder is proposed to supplement the missing information.Multi-scale decomposition is also employed to extract image features more comprehensively.The decoder combines low-frequency,high-frequency and supplementary information to obtain multi-scale features.Subsequently,the attention strategy and fusion module are introduced to perform multi-scale fusion for image reconstruction.Experimental results on three datasets show that the fused images generated by this network effectively retain salient targets while being more consistent with human visual perception.展开更多
Synthetic aperture radar(SAR)is a high-resolution two-dimensional imaging radar.However,during the imaging process,SAR is susceptible to intentional and unintentional interference,with radio frequency inter⁃ference(RF...Synthetic aperture radar(SAR)is a high-resolution two-dimensional imaging radar.However,during the imaging process,SAR is susceptible to intentional and unintentional interference,with radio frequency inter⁃ference(RFI)being the most common type,leading to a severe degradation in image quality.To address the above problem,numerous algorithms have been proposed.Although inpainting networks have achieved excellent results,their generalization is unclear.Whether they still work effectively in cross-sensor experiments needs fur⁃ther verification.Through the time-frequency analysis to interference signals,this work finds that interference holds domain invariant features between different sensors.Therefore,this work reconstructs the loss function and extracts the domain invariant features to improve its generalization.Ultimately,this work proposes a SAR RFI suppression method based on domain invariant features,and embeds the RFI suppression into SAR imaging pro⁃cess.Compared to traditional notch filtering methods,the proposed approach not only removes interference but also effectively preserves strong scattering targets.Compared to PISNet,our method can extract domain invariant features and hold better generalization ability,and even in the cross-sensor experiments,our method can still achieve excellent results.In cross-sensor experiments,training data and testing data come from different radar platforms with different parameters,so cross-sensor experiments can provide evidence for the generalization.展开更多
In modern war,radar countermeasure is becoming increasingly fierce,and the enemy jamming time and pattern are changing more randomly.It is challenging for the radar to efficiently identify jamming and obtain precise p...In modern war,radar countermeasure is becoming increasingly fierce,and the enemy jamming time and pattern are changing more randomly.It is challenging for the radar to efficiently identify jamming and obtain precise parameter information,particularly in low signal-to-noise ratio(SNR)situations.In this paper,an approach to intelligent recognition and complex jamming parameter estimate based on joint time-frequency distribution features is proposed to address this challenging issue.Firstly,a joint algorithm based on YOLOv5 convolutional neural networks(CNNs)is proposed,which is used to achieve the jamming signal classification and preliminary parameter estimation.Furthermore,an accurate jamming key parameters estimation algorithm is constructed by comprehensively utilizing chi-square statistical test,feature region search,position regression,spectrum interpolation,etc.,which realizes the accurate estimation of jamming carrier frequency,relative delay,Doppler frequency shift,and other parameters.Finally,the approach has improved performance for complex jamming recognition and parameter estimation under low SNR,and the recognition rate can reach 98%under−15 dB SNR,according to simulation and real data verification results.展开更多
Recently, the digital image blind forensics technology has received an increasing attention in academic community. This paper aims at developing a new identification approach based on the statistical noise and exchang...Recently, the digital image blind forensics technology has received an increasing attention in academic community. This paper aims at developing a new identification approach based on the statistical noise and exchangeable image file format （EXIF） information of image for images authen- tication. In particular, the authors can identify whether the current image has been modified or not by utilizing the relevance between noise and EXIF parameters and comparing the real values with the estimated values of the EXIF parameters. Experimental results validate the proposed method. That is, the detecting system can identify the doctored image effectively.展开更多
Constrained by complex imaging mechanism and extraordinary visual appearance,change detection with synthetic aperture radar(SAR)images has been a difficult research topic,especially in urban areas.Although existing st...Constrained by complex imaging mechanism and extraordinary visual appearance,change detection with synthetic aperture radar(SAR)images has been a difficult research topic,especially in urban areas.Although existing studies have extended from bi-temporal data pair to multi-temporal datasets to derive more plentiful information,there are still two problems to be solved in practical applications.First,change indicators constructed from incoherent feature only cannot characterize the change objects accurately.Second,the results of pixel-level methods are usually presented in the form of the noisy binary map,making the spatial change not intuitive and the temporal change of a single pixel meaningless.In this study,we propose an unsupervised man-made objects change detection framework using both coherent and incoherent features derived from multi-temporal SAR images.The coefficients of variation in timeseries incoherent features and the man-made object index(MOI)defined with coherent features are first combined to identify the initial change pixels.Afterwards,an improved spatiotemporal clustering algorithm is developed based on density-based spatial clustering of applications with noise(DBSCAN)and dynamic time warping(DTW),which can transform the initial results into noiseless object-level patches,and take the cluster center as a representative of the man-made object to determine the change pattern of each patch.An experiment with a stack of 10 TerraSAR-X images in Stripmap mode demonstrated that this method is effective in urban scenes and has the potential applicability to wide area change detection.展开更多
Generally speaking, "an economic circle" refers to a group of countriesand regions whose economic relations override the universally accepted in-ternational practice or norms and they have formulated new eco...Generally speaking, "an economic circle" refers to a group of countriesand regions whose economic relations override the universally accepted in-ternational practice or norms and they have formulated new economic ruleswhich are applicable only to countries and regions inside the circle.展开更多
Since the middle of the nineteen-eighties, there haveemerged in Northeast Asia many circles or economic zones of whichthe concept of the coastal region around the Yellow Sea and
Business English is an important tool used by importers and exporters innegotiating business with their customers abroad and drafting letters and commercialdocuments.Just like literary or scientific Engliush,it has it...Business English is an important tool used by importers and exporters innegotiating business with their customers abroad and drafting letters and commercialdocuments.Just like literary or scientific Engliush,it has its own characteristics.In thisarticle,owing to the limited space,I shall discuss only some of its special points inlanguage and euphemistic expressions.展开更多
The strength of cement-based materials,such as mortar,concrete and cement paste backfill(CPB),depends on its microstructures(e.g.pore structure and arrangement of particles and skeleton).Numerous studies on the relati...The strength of cement-based materials,such as mortar,concrete and cement paste backfill(CPB),depends on its microstructures(e.g.pore structure and arrangement of particles and skeleton).Numerous studies on the relationship between strength and pore structure(e.g.,pore size and its distribution)were performed,but the micro-morphology characteristics have been rarely concerned.Texture describing the surface properties of the sample is a global feature,which is an effective way to quantify the micro-morphological properties.In statistical analysis,GLCM features and Tamura texture are the most representative methods for characterizing the texture features.The mechanical strength and section image of the backfill sample prepared from three different solid concentrations of paste were obtained by uniaxial compressive strength test and scanning electron microscope,respectively.The texture features of different SEM images were calculated based on image analysis technology,and then the correlation between these parameters and the strength was analyzed.It was proved that the method is effective in the quantitative analysis on the micro-morphology characteristics of CPB.There is a significant correlation between the texture features and the unconfined compressive strength,and the prediction of strength is feasible using texture parameters of the CPB microstructure.展开更多
The selective laser melting(SLM)processed aluminum alloys have already aroused researchers’attention in aerospace,rail transport and petrochemical engineering due to the comprehensive advantages of low density,good c...The selective laser melting(SLM)processed aluminum alloys have already aroused researchers’attention in aerospace,rail transport and petrochemical engineering due to the comprehensive advantages of low density,good corrosion resistance and high mechanical performance.In this paper,an Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy was fabricated via SLM.The characteristics of single track at different process parameters,and the influence of hatch spacing on densification,microstructural features and tensile properties of block specimens were systematically studied.The hatch spacing has an influence on the overlap ratio of single track,and further affects the internal forming quality of printed specimen.At a laser power of 160 W and scanning speed of 400 mm/s,the densification of block specimen increased first and then decreased with the increase of hatch spacing.The nearly full dense specimen(98.7%)with a tensile strength of 452 MPa was fabricated at a hatch spacing of 80μm.Typical characteristics of dimple and cleavage on the tensile fracture of the AlMgSiScZr alloy showed the mixed fracture of ductility and brittleness.展开更多
This paper is going to focus on the lexis characteristics of the advertisement English in stylistics. The lexis characteristics of advertisement include using the new form of the spelling of a word to attract the cons...This paper is going to focus on the lexis characteristics of the advertisement English in stylistics. The lexis characteristics of advertisement include using the new form of the spelling of a word to attract the consumers’ attention; using the borrowed words to enhance the transmission effect of the advertisements; Frequent use of some verbs, adjectives to express the information and enhance the effect of language expression; Using the compounds in flexibility. Meanwhile, we could find out that some specific terms are used and the word used in advertisements show the gender.展开更多
A novel class of periodically changing features hidden in radar pulse sequence environment,named G features,is proposed.Combining fractal theory and Hilbert-Huang transform,the features are extracted using changing ch...A novel class of periodically changing features hidden in radar pulse sequence environment,named G features,is proposed.Combining fractal theory and Hilbert-Huang transform,the features are extracted using changing characteristics of pulse parameters in radar emitter signals.The features can be applied in modern complex electronic warfare environment to address the issue of signal sorting when radar emitter pulse signal parameters severely or even completely overlap.Experiment results show that the proposed feature class and feature extraction method can discriminate periodically changing pulse sequence signal sorting features from radar pulse signal flow with complex variant features,therefore provide a new methodology for signal sorting.展开更多
It is easy for teenagers to view pornographic pictures on social networks. Many researchers have studied the detection of real pornographic pictures, but there are few studies on those that are artificial. In this wor...It is easy for teenagers to view pornographic pictures on social networks. Many researchers have studied the detection of real pornographic pictures, but there are few studies on those that are artificial. In this work, we studied how to detect artificial pornographic pictures, especially when they are on social networks. The whole detection process can be divided into two stages： feature selection and picture detection. In the feature selection stage, seven types of features that favour picture detection were selected. In the picture detection stage, three steps were included. 1） In order to alleviate the imbalance in the number of artificial pornographic pictures and normal ones, the training dataset of artificial pornographic pictures was expanded. Therefore, the features which were extracted from the training dataset can also be expanded too. 2） In order to reduce the time of feature extraction, a fast method which extracted features based on the proportionally scaled picture rather than the original one was proposed. 3） Three tree models were compared and a gradient boost decision tree （GBDT） was selected for the final picture detection. Three sets of experimental results show that the proposed method can achieve better recognition precision and drastically reduce the time cost of the method.展开更多
Expression, occlusion, and pose variations are three main challenges for 3D face recognition. A novel method is presented to address 3D face recognition using scale-invariant feature transform(SIFT) features on 3D mes...Expression, occlusion, and pose variations are three main challenges for 3D face recognition. A novel method is presented to address 3D face recognition using scale-invariant feature transform(SIFT) features on 3D meshes. After preprocessing, shape index extrema on the 3D facial surface are selected as keypoints in the difference scale space and the unstable keypoints are removed after two screening steps. Then, a local coordinate system for each keypoint is established by principal component analysis(PCA).Next, two local geometric features are extracted around each keypoint through the local coordinate system. Additionally, the features are augmented by the symmetrization according to the approximate left-right symmetry in human face. The proposed method is evaluated on the Bosphorus, BU-3DFE, and Gavab databases, respectively. Good results are achieved on these three datasets. As a result, the proposed method proves robust to facial expression variations, partial external occlusions and large pose changes.展开更多
On the basis of history study and the depositional study the systematic investigation of late Mesozoic sedimentary features and basin evolution are conducted.The architectural elements analysis of sedimentary environm...On the basis of history study and the depositional study the systematic investigation of late Mesozoic sedimentary features and basin evolution are conducted.The architectural elements analysis of sedimentary environment shows that the depositional environment of the early Jurassic in late Mesozoic basin(Gahai basin) in the study area is lacustrine environment,and is further展开更多
Qaidam Basin, situated in the northeastern Qinghai\|Tibet plateau of western China at 35°55′～39°10′N and 90°～98°20′E, is surrounded by thrusts or folded belts. It is adjacent to the Qilian Mou...Qaidam Basin, situated in the northeastern Qinghai\|Tibet plateau of western China at 35°55′～39°10′N and 90°～98°20′E, is surrounded by thrusts or folded belts. It is adjacent to the Qilian Mountains on the north and northeast and to the Kunlun Mountains on the south, and to the Altun Mountains on the northwest. Qaidam plate is attributed to carbonate platform and non\|marine basin. The first stage is plate\|form from Sinian to Triassic, and the second is basin\|form in intraplate during non\|marine depositional period in Mesozoic and Cenozoic. 1 Tectonic feature The main structural elements of the eastern Qaidam basin, which the west border line is Germ and Dunhuang highway, include the Huobuxun depression, the Tin\|Iron Mountains ridge and Delingha depression as the secondary tectonic unit. These depressions extend along the northeastern edge of the Qinghai\|Tibet plateau, and form above a zone of Paleozoic pericraton subsidence at the north edge of the Qaidam plate during intracontinental orogenic phase in the Indosinian.展开更多
The hydrogeochemical parameters of Jiangjia Spring,the outlet of Qingrnuguan underground river system(QURS) in Chongqing,were found responding rapidly to storm events in late April,2008.A total of 20 kinds of hydrogeo...The hydrogeochemical parameters of Jiangjia Spring,the outlet of Qingrnuguan underground river system(QURS) in Chongqing,were found responding rapidly to storm events in late April,2008.A total of 20 kinds of hydrogeochemical parameters,including discharge,specific conductance,pH,water tempera-展开更多
The mineralogical features of the oxidation-reduction of graphite deposit in pingdu, Shandong province were studied by field search, polarization microscope, X-ray diffraction (XRD) and SEM. The results show that, the...The mineralogical features of the oxidation-reduction of graphite deposit in pingdu, Shandong province were studied by field search, polarization microscope, X-ray diffraction (XRD) and SEM. The results show that, the major rocks of the reduction graphite zone are graphite-quartz anorthosite, gabbro. The major rocks of the oxidation graphite zone are marble with graphite, biotite granite, monzogranite. The main minerals of the reduction zone are plagioclase, pyroxene, quartz, pyrite. The graphite is aphanitic graphite appearing as dense massive, layered, spherical aggregates. The main minerals of the oxidation zone are calcite, quartz, K-feldspar, biotite, amphibole, chlorite. The graphite is flake graphite uniformly dispersed in the loose, and strongly erosion rocks. A large number of rocks in the area have been suffered chloritization, regional metamorphism, indicating that the formation of the graphite deposit should be related with gabbro melting. The carbon source in the lower part was taken into the mine, and then experienced regional metamorphism.展开更多
Tsavorite green colored by Cr3+/V3+ has been traditionally found and mined in Tanzania, Kenya and Madagascar in the Neoproterozoic Mozambique metamorphic belt (NMMB), and recently be found in Sanjiang, Litang, Sichuan...Tsavorite green colored by Cr3+/V3+ has been traditionally found and mined in Tanzania, Kenya and Madagascar in the Neoproterozoic Mozambique metamorphic belt (NMMB), and recently be found in Sanjiang, Litang, Sichuan, China. The differences of the chemical formula, spectroscopic features, as well as the concentrations of the V2O3 and Cr2O3 in the tsavorite crystals collected from major international deposits and Sanjiang, China have been investigated using EPMA, XRF, UV-VIS spectrometers, FTIR, Raman scattering microscopy, DiamondView TM techniques. It was found that the chemical formulas of African tsavorite and Chinese tsavorite are Ca3(Al,V)2[SiO4]3 and Ca3(Al,Cr)2[SiO4]3, respectively, indicating that tsavorite is a solid solution between dominant grossular and minor goldmanite and uvarovite. Two broad bands centered at 430 nm and 605 nm were the main absorption features in the tsavorite samples, which attribute to the absorption of Cr3+ and/or V3+ ions in the lattice. The green coloration is caused by Cr3+ and/or V3+ ions resulting in the absorption of purple and red components of the visible light. Absorptions caused of Fe3+ and Fe2+ ions could add the bluish color component in some of tsavorite samples. The intensity of green color is proportional to the concentrations of V2O3 and Cr2O3. The basic gemological properties, such as refractive index in the investigated samples were presented, and the definition and chemical and spectroscopic properties of tsavorite are discussed.展开更多
1 Introduction Multi-metal contained Lead-zinc deposits in northeast Yunnan,China,is located in a joint place of the Circum-Pacific tectonic domain and Tethyan tectonic domain.This joint place is featured by complex g...1 Introduction Multi-metal contained Lead-zinc deposits in northeast Yunnan,China,is located in a joint place of the Circum-Pacific tectonic domain and Tethyan tectonic domain.This joint place is featured by complex geological structure,unique geological characteristic,and multiple lead-zinc mineral deposits,which are discretely and linearly distributed along the cracks of several main fracture zones.Most of the lead-zinc ores were filled into the展开更多
基金Supported by the Henan Province Key Research and Development Project(231111211300)the Central Government of Henan Province Guides Local Science and Technology Development Funds(Z20231811005)+2 种基金Henan Province Key Research and Development Project(231111110100)Henan Provincial Outstanding Foreign Scientist Studio(GZS2024006)Henan Provincial Joint Fund for Scientific and Technological Research and Development Plan(Application and Overcoming Technical Barriers)(242103810028)。
文摘The fusion of infrared and visible images should emphasize the salient targets in the infrared image while preserving the textural details of the visible images.To meet these requirements,an autoencoder-based method for infrared and visible image fusion is proposed.The encoder designed according to the optimization objective consists of a base encoder and a detail encoder,which is used to extract low-frequency and high-frequency information from the image.This extraction may lead to some information not being captured,so a compensation encoder is proposed to supplement the missing information.Multi-scale decomposition is also employed to extract image features more comprehensively.The decoder combines low-frequency,high-frequency and supplementary information to obtain multi-scale features.Subsequently,the attention strategy and fusion module are introduced to perform multi-scale fusion for image reconstruction.Experimental results on three datasets show that the fused images generated by this network effectively retain salient targets while being more consistent with human visual perception.
基金Supported by the National Natural Science Foundation of China(62001489)。
文摘Synthetic aperture radar(SAR)is a high-resolution two-dimensional imaging radar.However,during the imaging process,SAR is susceptible to intentional and unintentional interference,with radio frequency inter⁃ference(RFI)being the most common type,leading to a severe degradation in image quality.To address the above problem,numerous algorithms have been proposed.Although inpainting networks have achieved excellent results,their generalization is unclear.Whether they still work effectively in cross-sensor experiments needs fur⁃ther verification.Through the time-frequency analysis to interference signals,this work finds that interference holds domain invariant features between different sensors.Therefore,this work reconstructs the loss function and extracts the domain invariant features to improve its generalization.Ultimately,this work proposes a SAR RFI suppression method based on domain invariant features,and embeds the RFI suppression into SAR imaging pro⁃cess.Compared to traditional notch filtering methods,the proposed approach not only removes interference but also effectively preserves strong scattering targets.Compared to PISNet,our method can extract domain invariant features and hold better generalization ability,and even in the cross-sensor experiments,our method can still achieve excellent results.In cross-sensor experiments,training data and testing data come from different radar platforms with different parameters,so cross-sensor experiments can provide evidence for the generalization.
基金supported by Shandong Provincial Natural Science Foundation(ZR2020MF015)Aerospace Technology Group Stability Support Project(ZY0110020009).
文摘In modern war,radar countermeasure is becoming increasingly fierce,and the enemy jamming time and pattern are changing more randomly.It is challenging for the radar to efficiently identify jamming and obtain precise parameter information,particularly in low signal-to-noise ratio(SNR)situations.In this paper,an approach to intelligent recognition and complex jamming parameter estimate based on joint time-frequency distribution features is proposed to address this challenging issue.Firstly,a joint algorithm based on YOLOv5 convolutional neural networks(CNNs)is proposed,which is used to achieve the jamming signal classification and preliminary parameter estimation.Furthermore,an accurate jamming key parameters estimation algorithm is constructed by comprehensively utilizing chi-square statistical test,feature region search,position regression,spectrum interpolation,etc.,which realizes the accurate estimation of jamming carrier frequency,relative delay,Doppler frequency shift,and other parameters.Finally,the approach has improved performance for complex jamming recognition and parameter estimation under low SNR,and the recognition rate can reach 98%under−15 dB SNR,according to simulation and real data verification results.
基金supported by the National Natural Science Foundation of China under Grant Nos.61370195and 11101048Beijing Natural Science Foundation under Grant No.4132060the National Cryptography Development Foundation of China under Grant No.MMJJ201201002
文摘Recently, the digital image blind forensics technology has received an increasing attention in academic community. This paper aims at developing a new identification approach based on the statistical noise and exchangeable image file format （EXIF） information of image for images authen- tication. In particular, the authors can identify whether the current image has been modified or not by utilizing the relevance between noise and EXIF parameters and comparing the real values with the estimated values of the EXIF parameters. Experimental results validate the proposed method. That is, the detecting system can identify the doctored image effectively.
基金supported by the National Natural Science Foundation of China(41774006)the Comparative Study of Geo-environment and Geohazards in the Yangtze River Delta and the Red River Delta Projectthe Shanghai Science and Technology Development Foundation(20dz1201200)。
文摘Constrained by complex imaging mechanism and extraordinary visual appearance,change detection with synthetic aperture radar(SAR)images has been a difficult research topic,especially in urban areas.Although existing studies have extended from bi-temporal data pair to multi-temporal datasets to derive more plentiful information,there are still two problems to be solved in practical applications.First,change indicators constructed from incoherent feature only cannot characterize the change objects accurately.Second,the results of pixel-level methods are usually presented in the form of the noisy binary map,making the spatial change not intuitive and the temporal change of a single pixel meaningless.In this study,we propose an unsupervised man-made objects change detection framework using both coherent and incoherent features derived from multi-temporal SAR images.The coefficients of variation in timeseries incoherent features and the man-made object index(MOI)defined with coherent features are first combined to identify the initial change pixels.Afterwards,an improved spatiotemporal clustering algorithm is developed based on density-based spatial clustering of applications with noise(DBSCAN)and dynamic time warping(DTW),which can transform the initial results into noiseless object-level patches,and take the cluster center as a representative of the man-made object to determine the change pattern of each patch.An experiment with a stack of 10 TerraSAR-X images in Stripmap mode demonstrated that this method is effective in urban scenes and has the potential applicability to wide area change detection.
文摘Generally speaking, "an economic circle" refers to a group of countriesand regions whose economic relations override the universally accepted in-ternational practice or norms and they have formulated new economic ruleswhich are applicable only to countries and regions inside the circle.
文摘Since the middle of the nineteen-eighties, there haveemerged in Northeast Asia many circles or economic zones of whichthe concept of the coastal region around the Yellow Sea and
文摘Business English is an important tool used by importers and exporters innegotiating business with their customers abroad and drafting letters and commercialdocuments.Just like literary or scientific Engliush,it has its own characteristics.In thisarticle,owing to the limited space,I shall discuss only some of its special points inlanguage and euphemistic expressions.
基金Project(51722401)supported by the National Natural Science Foundation for Excellent Young Scholars of ChinaProject(FRF-TP-18-003C1)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(51734001)supported by the Key Program of National Natural Science Foundation of China
文摘The strength of cement-based materials,such as mortar,concrete and cement paste backfill(CPB),depends on its microstructures(e.g.pore structure and arrangement of particles and skeleton).Numerous studies on the relationship between strength and pore structure(e.g.,pore size and its distribution)were performed,but the micro-morphology characteristics have been rarely concerned.Texture describing the surface properties of the sample is a global feature,which is an effective way to quantify the micro-morphological properties.In statistical analysis,GLCM features and Tamura texture are the most representative methods for characterizing the texture features.The mechanical strength and section image of the backfill sample prepared from three different solid concentrations of paste were obtained by uniaxial compressive strength test and scanning electron microscope,respectively.The texture features of different SEM images were calculated based on image analysis technology,and then the correlation between these parameters and the strength was analyzed.It was proved that the method is effective in the quantitative analysis on the micro-morphology characteristics of CPB.There is a significant correlation between the texture features and the unconfined compressive strength,and the prediction of strength is feasible using texture parameters of the CPB microstructure.
基金Project(51775481)supported by the National Natural Science Foundation of ChinaProject(E2019203418)supported by the Natural Science Foundation of Hebei Province,China。
文摘The selective laser melting(SLM)processed aluminum alloys have already aroused researchers’attention in aerospace,rail transport and petrochemical engineering due to the comprehensive advantages of low density,good corrosion resistance and high mechanical performance.In this paper,an Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy was fabricated via SLM.The characteristics of single track at different process parameters,and the influence of hatch spacing on densification,microstructural features and tensile properties of block specimens were systematically studied.The hatch spacing has an influence on the overlap ratio of single track,and further affects the internal forming quality of printed specimen.At a laser power of 160 W and scanning speed of 400 mm/s,the densification of block specimen increased first and then decreased with the increase of hatch spacing.The nearly full dense specimen(98.7%)with a tensile strength of 452 MPa was fabricated at a hatch spacing of 80μm.Typical characteristics of dimple and cleavage on the tensile fracture of the AlMgSiScZr alloy showed the mixed fracture of ductility and brittleness.
文摘This paper is going to focus on the lexis characteristics of the advertisement English in stylistics. The lexis characteristics of advertisement include using the new form of the spelling of a word to attract the consumers’ attention; using the borrowed words to enhance the transmission effect of the advertisements; Frequent use of some verbs, adjectives to express the information and enhance the effect of language expression; Using the compounds in flexibility. Meanwhile, we could find out that some specific terms are used and the word used in advertisements show the gender.
基金supported by the National Natural Science Foundation of China (60872108)the Postdoctoral Science Foundation of China(200902411+3 种基金20080430903)Heilongjiang Postdoctoral Financial Assistance (LBH-Z08129)the Scientific and Technological Creative Talents Special Research Foundation of Harbin Municipality (2008RFQXG030)Central University Basic Research Professional Expenses Special Fund Project
文摘A novel class of periodically changing features hidden in radar pulse sequence environment,named G features,is proposed.Combining fractal theory and Hilbert-Huang transform,the features are extracted using changing characteristics of pulse parameters in radar emitter signals.The features can be applied in modern complex electronic warfare environment to address the issue of signal sorting when radar emitter pulse signal parameters severely or even completely overlap.Experiment results show that the proposed feature class and feature extraction method can discriminate periodically changing pulse sequence signal sorting features from radar pulse signal flow with complex variant features,therefore provide a new methodology for signal sorting.
基金Projects(61573380,61303185) supported by the National Natural Science Foundation of ChinaProjects(2016M592450,2017M612585) supported by the China Postdoctoral Science FoundationProjects(2016JJ4119,2017JJ3416) supported by the Hunan Provincial Natural Science Foundation of China
文摘It is easy for teenagers to view pornographic pictures on social networks. Many researchers have studied the detection of real pornographic pictures, but there are few studies on those that are artificial. In this work, we studied how to detect artificial pornographic pictures, especially when they are on social networks. The whole detection process can be divided into two stages： feature selection and picture detection. In the feature selection stage, seven types of features that favour picture detection were selected. In the picture detection stage, three steps were included. 1） In order to alleviate the imbalance in the number of artificial pornographic pictures and normal ones, the training dataset of artificial pornographic pictures was expanded. Therefore, the features which were extracted from the training dataset can also be expanded too. 2） In order to reduce the time of feature extraction, a fast method which extracted features based on the proportionally scaled picture rather than the original one was proposed. 3） Three tree models were compared and a gradient boost decision tree （GBDT） was selected for the final picture detection. Three sets of experimental results show that the proposed method can achieve better recognition precision and drastically reduce the time cost of the method.
基金Project(XDA06020300)supported by the"Strategic Priority Research Program"of the Chinese Academy of SciencesProject(12511501700)supported by the Research on the Key Technology of Internet of Things for Urban Community Safety Based on Video Sensor networks
文摘Expression, occlusion, and pose variations are three main challenges for 3D face recognition. A novel method is presented to address 3D face recognition using scale-invariant feature transform(SIFT) features on 3D meshes. After preprocessing, shape index extrema on the 3D facial surface are selected as keypoints in the difference scale space and the unstable keypoints are removed after two screening steps. Then, a local coordinate system for each keypoint is established by principal component analysis(PCA).Next, two local geometric features are extracted around each keypoint through the local coordinate system. Additionally, the features are augmented by the symmetrization according to the approximate left-right symmetry in human face. The proposed method is evaluated on the Bosphorus, BU-3DFE, and Gavab databases, respectively. Good results are achieved on these three datasets. As a result, the proposed method proves robust to facial expression variations, partial external occlusions and large pose changes.
基金Supported by the project of China Petroleum & Chemical Corporation,the present paper is aimed at the late Mesozoic sedimentary features and basin evolution of the western segment of Bailongjiang Uplift Zone in the Songpan area
文摘On the basis of history study and the depositional study the systematic investigation of late Mesozoic sedimentary features and basin evolution are conducted.The architectural elements analysis of sedimentary environment shows that the depositional environment of the early Jurassic in late Mesozoic basin(Gahai basin) in the study area is lacustrine environment,and is further
文摘Qaidam Basin, situated in the northeastern Qinghai\|Tibet plateau of western China at 35°55′～39°10′N and 90°～98°20′E, is surrounded by thrusts or folded belts. It is adjacent to the Qilian Mountains on the north and northeast and to the Kunlun Mountains on the south, and to the Altun Mountains on the northwest. Qaidam plate is attributed to carbonate platform and non\|marine basin. The first stage is plate\|form from Sinian to Triassic, and the second is basin\|form in intraplate during non\|marine depositional period in Mesozoic and Cenozoic. 1 Tectonic feature The main structural elements of the eastern Qaidam basin, which the west border line is Germ and Dunhuang highway, include the Huobuxun depression, the Tin\|Iron Mountains ridge and Delingha depression as the secondary tectonic unit. These depressions extend along the northeastern edge of the Qinghai\|Tibet plateau, and form above a zone of Paleozoic pericraton subsidence at the north edge of the Qaidam plate during intracontinental orogenic phase in the Indosinian.
文摘The hydrogeochemical parameters of Jiangjia Spring,the outlet of Qingrnuguan underground river system(QURS) in Chongqing,were found responding rapidly to storm events in late April,2008.A total of 20 kinds of hydrogeochemical parameters,including discharge,specific conductance,pH,water tempera-
文摘The mineralogical features of the oxidation-reduction of graphite deposit in pingdu, Shandong province were studied by field search, polarization microscope, X-ray diffraction (XRD) and SEM. The results show that, the major rocks of the reduction graphite zone are graphite-quartz anorthosite, gabbro. The major rocks of the oxidation graphite zone are marble with graphite, biotite granite, monzogranite. The main minerals of the reduction zone are plagioclase, pyroxene, quartz, pyrite. The graphite is aphanitic graphite appearing as dense massive, layered, spherical aggregates. The main minerals of the oxidation zone are calcite, quartz, K-feldspar, biotite, amphibole, chlorite. The graphite is flake graphite uniformly dispersed in the loose, and strongly erosion rocks. A large number of rocks in the area have been suffered chloritization, regional metamorphism, indicating that the formation of the graphite deposit should be related with gabbro melting. The carbon source in the lower part was taken into the mine, and then experienced regional metamorphism.
文摘Tsavorite green colored by Cr3+/V3+ has been traditionally found and mined in Tanzania, Kenya and Madagascar in the Neoproterozoic Mozambique metamorphic belt (NMMB), and recently be found in Sanjiang, Litang, Sichuan, China. The differences of the chemical formula, spectroscopic features, as well as the concentrations of the V2O3 and Cr2O3 in the tsavorite crystals collected from major international deposits and Sanjiang, China have been investigated using EPMA, XRF, UV-VIS spectrometers, FTIR, Raman scattering microscopy, DiamondView TM techniques. It was found that the chemical formulas of African tsavorite and Chinese tsavorite are Ca3(Al,V)2[SiO4]3 and Ca3(Al,Cr)2[SiO4]3, respectively, indicating that tsavorite is a solid solution between dominant grossular and minor goldmanite and uvarovite. Two broad bands centered at 430 nm and 605 nm were the main absorption features in the tsavorite samples, which attribute to the absorption of Cr3+ and/or V3+ ions in the lattice. The green coloration is caused by Cr3+ and/or V3+ ions resulting in the absorption of purple and red components of the visible light. Absorptions caused of Fe3+ and Fe2+ ions could add the bluish color component in some of tsavorite samples. The intensity of green color is proportional to the concentrations of V2O3 and Cr2O3. The basic gemological properties, such as refractive index in the investigated samples were presented, and the definition and chemical and spectroscopic properties of tsavorite are discussed.
文摘1 Introduction Multi-metal contained Lead-zinc deposits in northeast Yunnan,China,is located in a joint place of the Circum-Pacific tectonic domain and Tethyan tectonic domain.This joint place is featured by complex geological structure,unique geological characteristic,and multiple lead-zinc mineral deposits,which are discretely and linearly distributed along the cracks of several main fracture zones.Most of the lead-zinc ores were filled into the
