The process of ground vehicle dynamic gravimetry is inevitably affected by the carrier’s maneuvering acceleration,which makes the result contain a large amount of dynamic error.In this paper,we propose a dynamic erro...The process of ground vehicle dynamic gravimetry is inevitably affected by the carrier’s maneuvering acceleration,which makes the result contain a large amount of dynamic error.In this paper,we propose a dynamic error suppression method of gravimetry based on the high-precision acquisition of external velocity for compensating the horizontal error of the inertial plat-form.On the basis of platform gravity measurement,firstly,the dynamic performance of the system is enhanced by optimizing the horizontal damping network of the inertial platform and selecting its parameter.Secondly,an improved federal Kalman filtering algorithm and a fault diagnosis method are designed using strapdown inertial navigation system(SINS),odometer(OD),and laser Doppler velocimeter(LDV).Simulation validates that these methods can improve the accuracy and robustness of the external velocity acquisition.Three survey lines are selected in Tianjin,China,for the gravimetry experiments with different maneuvering levels,and the results demonstrate that after dynamic error suppression,the internal coincidence accuracies of smooth and uniform operation,obvious acceleration and deceleration operation,and high-dynamic operation are improved by 70.2%,73.6%,and 77.9%to reach 0.81 mGal,1.30 mGal,and 1.94 mGal,respectively,and the external coinci-dence accuracies during smooth and uniform operation are improved by 48.6%up to 1.66 mGal.It is shown that the pro-posed method can effectively suppress the dynamic error,and that the accuracy improvement increases with carrier maneuver-ability.However,the amount of residual error that can not be entirely eliminated increases as well,so the ground vehicle dynamic gravimetry should be maintained in the carrier for smooth and uniform operation.展开更多
Two calculation modes for the effect of external load on slope stability, i.e., mode I in which the external load is thought to act on slope surface, and mode II in which the external load is thought to act on slip su...Two calculation modes for the effect of external load on slope stability, i.e., mode I in which the external load is thought to act on slope surface, and mode II in which the external load is thought to act on slip surface along the force action line, were considered. Meanwhile, four basic distribution patterns of external load were used, of which complex external loads could be composed. In analysis process, several limit equilibrium methods, such as Swedish method, simplified Bishop method, simplified Janbu method, Spencer method, Morgenstern-Price(M-P) method, Sarma method, and unbalanced thrust method, were also adopted to contrast their differences in slope stability under the external load. According to parametric analysis, some conclusions can be obtained as follows:(1) The external load, with the large magnitude, small inclination angle, and acting position close to the slope toe,has more positive effect on slope stability;(2) The results calculated using modes I and II of external load are similar, indicating that the calculation mode of external load has little influence on slope stability;(3) If different patterns of external loads are equivalent to each other, their slope stability under these external loads are the same, and if not, the external load leads to the better slope stability,as action position of the resultant force for external load is closer to the lower sliding point of slip surface.展开更多
External return mechanism is a mechanical structure applied to axial piston pumps.To study its lubrication characteristics,the Reynolds equation applied to an external return spherical hinge pair was deduced based on ...External return mechanism is a mechanical structure applied to axial piston pumps.To study its lubrication characteristics,the Reynolds equation applied to an external return spherical hinge pair was deduced based on the vector equation of relative-motion velocity of the external return spherical hinge pair under the influence of external swash plate inclination and offset distance.The results show that the total friction,axial leakage flow,and maximum value of the maximum oil-film pressure increase with increasing pump-shaft speed and decrease with increasing offset distance in one working cycle when the external-swash-plate inclination is constant.However,the varying offset distance has little effect on the axial leakage flow.The maximum value of the maximum oil-film pressure decreases with increasing external-swash-plate inclination and the total leakage flow increases with increasing external-swash-plate inclination in one working cycle when the offset distance is constant.It can be seen that the abovementioned parameters are important factors that affect the lubrication characteristics of external return spherical hinge pairs.Therefore,the complex effects of different coupling parameters should be comprehensively considered in the design of the external return mechanism.展开更多
The PD-type iterative learning control design of a class of affine nonlinear time-delay systems with external disturbances is considered. Sufficient conditions guaranteeing the convergence of the n-norm of the trackin...The PD-type iterative learning control design of a class of affine nonlinear time-delay systems with external disturbances is considered. Sufficient conditions guaranteeing the convergence of the n-norm of the tracking error are derived. It is shown that the system outputs can be guaranteed to converge to desired trajectories in the absence of external disturbances and output measurement noises. And in the presence of state disturbances and measurement noises, the tracking error will be bounded uniformly. A numerical simulation example is presented to validate the effectiveness of the proposed scheme.展开更多
The method for calculating wall surface heat storage coefficient was introduced,and the coefficients of several common walls with light-weight external thermal insulation materials and the traditional solid clay brick...The method for calculating wall surface heat storage coefficient was introduced,and the coefficients of several common walls with light-weight external thermal insulation materials and the traditional solid clay brick wall were calculated.In order to study the impact of light-weight external thermal insulation materials,a contrasting experiment was carried out between an external insulated room and an uninsulated room in August,2010,in Chongqing,China.The result shows that outside surface heat storage coefficient of the insulated wall is much less than that of the traditional wall.However,during sunny time,the surface temperature of external walls of the insulated room is obviously higher than that of the uninsulated room.In different orientations,due to different amounts of solar radiation and being irradiated in different time,the contrasting temperature difference(CTD) appears different regularity.In a word,using light-weight external thermal insulation materials has a negative impact on building surrounding thermal environment and people's health.Finally,some suggestions on how to eliminate the impact,such as improving the surface condition of the building envelop,and plating vertical greening,are put forward.展开更多
Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understandin...Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.展开更多
Overstraining gun tubes has a twofold advantage. First, it enables the increase of the Safe Maximum Pressure(SMP) in the tube, resulting in a higher muzzle velocity which extends the gun's range and its projectile...Overstraining gun tubes has a twofold advantage. First, it enables the increase of the Safe Maximum Pressure(SMP) in the tube, resulting in a higher muzzle velocity which extends the gun's range and its projectile kinetic energy. Second, it reduces the tube's susceptibility to internal cracking which prolongs its fatigue life. Unfortunately, autofrettage also bears an inherent detrimental effect as it considerably increases the tensile hoop stress at the outer portion of the barrel's wall, which enhances external cracking of the tube by increasing the prevailing Stress Intensity Factor(SIF). In order to quantify this disadvantageous effect, 3-D Mode I SIFs distributions along the front of a single external radial semielliptical crack initiating from the outer surface of an autofrettaged modern gun barrel, overstrained by either the Swage or the Hydraulic autofrettage processes, are evaluated. The analysis is performed by the finite element(FE) method, using singular elements along the crack front. Innovative residual stress fields(RSFs), incorporating the Bauschinger effect for both types of autofrettage are applied to the barrel.Hill's [1] RSF is also applied to the tube for comparison reasons. All three RSFs are incorporated in the FE analysis, using equivalent temperature fields, Values for K_(IA)-the SIF resulting from the tensile residual stresses induced by autofrettage are evaluated for: a typical barrel of radii ratio R_o/R_i = 2, crack depth to wall-thickness ratios(a/t = 0.005-0.1),crack ellipticities(a/c = 0.2-1.0),and five levels of Swage,Hydraulic and Hill's autofrettage(e = 40%,60%,70%,80%,and 100%). In total,375 different 3-D cases are analyzed. The analysis demonstrates undoubtedly the detrimental effect of all types of autofrettage in increasing the prevailing effective stress intensity factor of external cracks, resulting in crack initiation enhancement and crack growth rate acceleration which considerably shortens the total fatigue life of the barrel. Nonetheless, the detrimental effect is autofrettage-type dependent. Swage and Hydraulic autofrettage RSFs differ substantially from each other. The disadvantageous effect of Swage autofrettage is much greater than that resulting from Hydraulic autofrettage. The results also emphasize the significance of the Bauschinger effect and the importance of the 3-D analysis.展开更多
The start-up of external circulationadded internal circulation(IC) reactor was finished in 26 d, 32 d fewer than that of IC reactor. To evaluate the influence of the added external circulation on the development of gr...The start-up of external circulationadded internal circulation(IC) reactor was finished in 26 d, 32 d fewer than that of IC reactor. To evaluate the influence of the added external circulation on the development of granular sludge, the characteristics of the granular sludge taken from the two tested laboratory-scale reactors during start-up were studied. The results show that the added external circulation can enhance biomass granulation, accelerate granule development and improve sludge characteristics. At the end of start-up, the granular size of sludge in external circulation-added IC reactor greatly increases with a size distribution much better than that of sludge in IC reactor. The granular sludge originated from external circulationadded IC reactor contains more extracellular polymers and has a greater settling velocity than that from IC reactor. Methanogenic activity of the granular sludge from the external circulationadded IC reactor started 26 d ago reaches 358.23mL·g -1 ·d -1 , 1.66 and 1.20 times as great as that of the sludge from the IC reactor started 26 d and 58 d ago respectively.展开更多
The heavy metals in the atmosphere mainly come from the gas and dust which involved by the energy costs,transport,metallurgy and building materials production.Other than the element of Hg,the heavy metals come into th...The heavy metals in the atmosphere mainly come from the gas and dust which involved by the energy costs,transport,metallurgy and building materials production.Other than the element of Hg,the heavy metals come into the atmosphere in the form of aerosol basically and go into the soil through展开更多
The porous tiles under the dry and wet conditions were studied. The simplified mathematical model was put forward to simulate the procedure of moisture evaporating for the densely porous tile. The results show that th...The porous tiles under the dry and wet conditions were studied. The simplified mathematical model was put forward to simulate the procedure of moisture evaporating for the densely porous tile. The results show that the capability of passive cooling of the porous tile is more than 5 ℃ with moisture content of 30% in Yangtze river region. Through the comparison between the measuring and simulating data,it can be proved that the simplified math model can be fully used to the engineering application,which provides a reference to explore the thermal performance of other porous material.展开更多
Infrared spectrum and NMR chemical shifts of Si (CH3)2O double free radical were calculatedemploying density functional theory(DFT) with the basis sets 6 - 311 + G(2d, p). Excited states, dipole momentand energy of Si...Infrared spectrum and NMR chemical shifts of Si (CH3)2O double free radical were calculatedemploying density functional theory(DFT) with the basis sets 6 - 311 + G(2d, p). Excited states, dipole momentand energy of Si(CH3 )2O double free radical were also calculated using time dependent density function theory(TD-DFT) with the same basis sets. It is found that the external electric field along the X,Y and Z axis affectdifferently on the excited states and other properties of Si(CH3)2O double free radical.展开更多
Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other...Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.展开更多
Nowadays,with the rapid development of the society,autonomous learning becomes more and more important.Chinese university students have realized the importance of the autonomous learning but they are not good autonomo...Nowadays,with the rapid development of the society,autonomous learning becomes more and more important.Chinese university students have realized the importance of the autonomous learning but they are not good autonomous learners.The paper analyzes major factors influencing college students’autonomous learning,and then makes some suggestions on how to improve their autonomous English learning abilities.展开更多
文中介绍了一种新的融合雷达和雨量计数据开展定量估测降水研究的空间信息统计学方法—Kriging with external drift(KED)方法。该方法能很好地融合高精度、低时空分辨率的雨量计数据和低精度、高时空分辨率的雷达数据进行插值。通过变...文中介绍了一种新的融合雷达和雨量计数据开展定量估测降水研究的空间信息统计学方法—Kriging with external drift(KED)方法。该方法能很好地融合高精度、低时空分辨率的雨量计数据和低精度、高时空分辨率的雷达数据进行插值。通过变异函数描述降水场的空间结构信息,能够充分利用数据间的空间相关性,来改进估测精度和提高处理速度。利用其优良的数学特性,以期在定量估测降水业务研究上进行新的探索和尝试。选用湖南省有代表意义的3次降水过程资料,通过雷达直接估测降水(RAD)、变分校准(VAR)以及KED3种方法,分别与雨量计测量值进行对比分析,选用代表站进行交叉验证结果均表明:RAD的均方差、绝对误差、相对误差最大,VAR次之,而KED最小。KED估测的结果与雨量计测量降水最为接近,估测效果最好;3种方法与雨量计实测值计算一定范围的误差频率,KED估测值具有最小的均方差和最小的标准差,且误差分布相对集中在0值附近,斜度和峰度最佳,试验证明该方法不仅能提高降水估测精度,且优于其他方法,VAR均方差次之,RAD均方差效果相对较差。联合雷达、雨量计估测降水的实质是把雷达估测值与雨量计测量的结果相融合,以雨量计来校准雷达估测值,保留了雷达探测到降水的中、小尺度精细特征。校准后的雨量场数值接近雨量计测值,而且能够准确反映雷达测得的降水分布形式。展开更多
A nonlinear controller based on an extended second-order disturbance observer is presented to track desired position for an electro-hydraulic single-rod actuator in the presence of both external disturbances and param...A nonlinear controller based on an extended second-order disturbance observer is presented to track desired position for an electro-hydraulic single-rod actuator in the presence of both external disturbances and parameter uncertainties. The proposed extended second-order disturbance observer deals with not only the external perturbations, but also parameter uncertainties which are commonly regarded as lumped disturbances in previous researches. Besides, the outer position tracking loop is designed with cylinder load pressure as output; and the inner pressure control loop provides the hydraulic actuator the characteristic of a force generator. The stability of the closed-loop system is provided based on Lyapunov theory. The performance of the controller is verified through simulations and experiments. The results demonstrate that the proposed nonlinear position tracking controller, together with the extended second-order disturbance observer, gives an excellent tracking performance in the presence of parameter uncertainties and external disturbance.展开更多
Aimed at requirements, a kind of radar stabilized platform with external rotor and orthogonal shafts is designed. Its dynamic characters are analyzed by using finite element theory and ANSYS software. Also, a traditio...Aimed at requirements, a kind of radar stabilized platform with external rotor and orthogonal shafts is designed. Its dynamic characters are analyzed by using finite element theory and ANSYS software. Also, a traditional stabilized platform with inner rotor is designed for comparison. It is shown that the new platform reduces two transmission links and 20% of precise components, its weight decreases by 20%, its natural frequency and rigidity are enlarged, the operating accuracy and stationary are increased. The new stabilized platform is more superiority and practicability. Its design method and analysis results have already been used in development mission. It provides helpful reference for similar structure designs.展开更多
The intensity of external uncertain environments has urged more and more companies to adopt theentrepreneurial orientation strategy.But to translate the corporate entrepreneurial orientation intoorganizational perform...The intensity of external uncertain environments has urged more and more companies to adopt theentrepreneurial orientation strategy.But to translate the corporate entrepreneurial orientation intoorganizational performance,there must be certain transformation paths and the support from internalentrepreneurial environment.展开更多
An important part of the "Belt and Road " Initiative is to achieve people-to-people bonds. People-to-people bonds are certainly based on cultural self-confidence and cultural self-awareness. Cultural self-co...An important part of the "Belt and Road " Initiative is to achieve people-to-people bonds. People-to-people bonds are certainly based on cultural self-confidence and cultural self-awareness. Cultural self-confidence is an important cultural strategy put forward by the party and the country in the vision of contemporary society,and an important deployment to realize the great rejuvenation of the Chinese nation. This paper first gives a brief overview of the advantages of cultural self-confidence in external communication,and then analyzes the opportunities and challenges that cultural self-confidence faces in external communication in the newera. Finally,it focuses on exploration on the external communication ways of cultural self-confidence in the "Belt and Road"Initiative. O nly based on the deep understanding of local culture can we can shape the soul of culture in the process of further opening-up and external communication to the outside world,and enhance the cultural self-aw areness of the people; build a solid foundation of culture and promote cultural exchanges with other countries.展开更多
基金supported by the Shanxi Provincial Natural Science Basic Research Program Young Talent Project(S2019-JC-QN-2408).
文摘The process of ground vehicle dynamic gravimetry is inevitably affected by the carrier’s maneuvering acceleration,which makes the result contain a large amount of dynamic error.In this paper,we propose a dynamic error suppression method of gravimetry based on the high-precision acquisition of external velocity for compensating the horizontal error of the inertial plat-form.On the basis of platform gravity measurement,firstly,the dynamic performance of the system is enhanced by optimizing the horizontal damping network of the inertial platform and selecting its parameter.Secondly,an improved federal Kalman filtering algorithm and a fault diagnosis method are designed using strapdown inertial navigation system(SINS),odometer(OD),and laser Doppler velocimeter(LDV).Simulation validates that these methods can improve the accuracy and robustness of the external velocity acquisition.Three survey lines are selected in Tianjin,China,for the gravimetry experiments with different maneuvering levels,and the results demonstrate that after dynamic error suppression,the internal coincidence accuracies of smooth and uniform operation,obvious acceleration and deceleration operation,and high-dynamic operation are improved by 70.2%,73.6%,and 77.9%to reach 0.81 mGal,1.30 mGal,and 1.94 mGal,respectively,and the external coinci-dence accuracies during smooth and uniform operation are improved by 48.6%up to 1.66 mGal.It is shown that the pro-posed method can effectively suppress the dynamic error,and that the accuracy improvement increases with carrier maneuver-ability.However,the amount of residual error that can not be entirely eliminated increases as well,so the ground vehicle dynamic gravimetry should be maintained in the carrier for smooth and uniform operation.
基金Project(2015M580702)supported by the China Postdoctoral Science FoundationProject(51608541)supported by the National Natural Science Foundation of ChinaProject(2014122006)supported by the Guizhou Provincial Department of Transportation Foundation,China
文摘Two calculation modes for the effect of external load on slope stability, i.e., mode I in which the external load is thought to act on slope surface, and mode II in which the external load is thought to act on slip surface along the force action line, were considered. Meanwhile, four basic distribution patterns of external load were used, of which complex external loads could be composed. In analysis process, several limit equilibrium methods, such as Swedish method, simplified Bishop method, simplified Janbu method, Spencer method, Morgenstern-Price(M-P) method, Sarma method, and unbalanced thrust method, were also adopted to contrast their differences in slope stability under the external load. According to parametric analysis, some conclusions can be obtained as follows:(1) The external load, with the large magnitude, small inclination angle, and acting position close to the slope toe,has more positive effect on slope stability;(2) The results calculated using modes I and II of external load are similar, indicating that the calculation mode of external load has little influence on slope stability;(3) If different patterns of external loads are equivalent to each other, their slope stability under these external loads are the same, and if not, the external load leads to the better slope stability,as action position of the resultant force for external load is closer to the lower sliding point of slip surface.
基金Project(GXXT-2019-048)supported by the University Synergy Innovation Program of Anhui Province,ChinaProject(51575002)supported by the National Natural Science Foundation of ChinaProject(gxbj ZD11)supported by the Top-Notch Talent Program of University(Profession)in Anhui Province,China。
文摘External return mechanism is a mechanical structure applied to axial piston pumps.To study its lubrication characteristics,the Reynolds equation applied to an external return spherical hinge pair was deduced based on the vector equation of relative-motion velocity of the external return spherical hinge pair under the influence of external swash plate inclination and offset distance.The results show that the total friction,axial leakage flow,and maximum value of the maximum oil-film pressure increase with increasing pump-shaft speed and decrease with increasing offset distance in one working cycle when the external-swash-plate inclination is constant.However,the varying offset distance has little effect on the axial leakage flow.The maximum value of the maximum oil-film pressure decreases with increasing external-swash-plate inclination and the total leakage flow increases with increasing external-swash-plate inclination in one working cycle when the offset distance is constant.It can be seen that the abovementioned parameters are important factors that affect the lubrication characteristics of external return spherical hinge pairs.Therefore,the complex effects of different coupling parameters should be comprehensively considered in the design of the external return mechanism.
基金This project was supported by the National Natural Science Foundation of China (60074001) and the Natural ScienceFoundation of Shandong Province (Y2000G02)
文摘The PD-type iterative learning control design of a class of affine nonlinear time-delay systems with external disturbances is considered. Sufficient conditions guaranteeing the convergence of the n-norm of the tracking error are derived. It is shown that the system outputs can be guaranteed to converge to desired trajectories in the absence of external disturbances and output measurement noises. And in the presence of state disturbances and measurement noises, the tracking error will be bounded uniformly. A numerical simulation example is presented to validate the effectiveness of the proposed scheme.
基金Project(2011BAJ03B13) supported by the National Key Technologies R&D Program of China
文摘The method for calculating wall surface heat storage coefficient was introduced,and the coefficients of several common walls with light-weight external thermal insulation materials and the traditional solid clay brick wall were calculated.In order to study the impact of light-weight external thermal insulation materials,a contrasting experiment was carried out between an external insulated room and an uninsulated room in August,2010,in Chongqing,China.The result shows that outside surface heat storage coefficient of the insulated wall is much less than that of the traditional wall.However,during sunny time,the surface temperature of external walls of the insulated room is obviously higher than that of the uninsulated room.In different orientations,due to different amounts of solar radiation and being irradiated in different time,the contrasting temperature difference(CTD) appears different regularity.In a word,using light-weight external thermal insulation materials has a negative impact on building surrounding thermal environment and people's health.Finally,some suggestions on how to eliminate the impact,such as improving the surface condition of the building envelop,and plating vertical greening,are put forward.
基金financial support from the China Postdoctora Science Foundation(project No.2021M690406)financial supports from the National Natural Science Foundation of China(project No.51708521,51778183)。
文摘Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.
文摘Overstraining gun tubes has a twofold advantage. First, it enables the increase of the Safe Maximum Pressure(SMP) in the tube, resulting in a higher muzzle velocity which extends the gun's range and its projectile kinetic energy. Second, it reduces the tube's susceptibility to internal cracking which prolongs its fatigue life. Unfortunately, autofrettage also bears an inherent detrimental effect as it considerably increases the tensile hoop stress at the outer portion of the barrel's wall, which enhances external cracking of the tube by increasing the prevailing Stress Intensity Factor(SIF). In order to quantify this disadvantageous effect, 3-D Mode I SIFs distributions along the front of a single external radial semielliptical crack initiating from the outer surface of an autofrettaged modern gun barrel, overstrained by either the Swage or the Hydraulic autofrettage processes, are evaluated. The analysis is performed by the finite element(FE) method, using singular elements along the crack front. Innovative residual stress fields(RSFs), incorporating the Bauschinger effect for both types of autofrettage are applied to the barrel.Hill's [1] RSF is also applied to the tube for comparison reasons. All three RSFs are incorporated in the FE analysis, using equivalent temperature fields, Values for K_(IA)-the SIF resulting from the tensile residual stresses induced by autofrettage are evaluated for: a typical barrel of radii ratio R_o/R_i = 2, crack depth to wall-thickness ratios(a/t = 0.005-0.1),crack ellipticities(a/c = 0.2-1.0),and five levels of Swage,Hydraulic and Hill's autofrettage(e = 40%,60%,70%,80%,and 100%). In total,375 different 3-D cases are analyzed. The analysis demonstrates undoubtedly the detrimental effect of all types of autofrettage in increasing the prevailing effective stress intensity factor of external cracks, resulting in crack initiation enhancement and crack growth rate acceleration which considerably shortens the total fatigue life of the barrel. Nonetheless, the detrimental effect is autofrettage-type dependent. Swage and Hydraulic autofrettage RSFs differ substantially from each other. The disadvantageous effect of Swage autofrettage is much greater than that resulting from Hydraulic autofrettage. The results also emphasize the significance of the Bauschinger effect and the importance of the 3-D analysis.
文摘The start-up of external circulationadded internal circulation(IC) reactor was finished in 26 d, 32 d fewer than that of IC reactor. To evaluate the influence of the added external circulation on the development of granular sludge, the characteristics of the granular sludge taken from the two tested laboratory-scale reactors during start-up were studied. The results show that the added external circulation can enhance biomass granulation, accelerate granule development and improve sludge characteristics. At the end of start-up, the granular size of sludge in external circulation-added IC reactor greatly increases with a size distribution much better than that of sludge in IC reactor. The granular sludge originated from external circulationadded IC reactor contains more extracellular polymers and has a greater settling velocity than that from IC reactor. Methanogenic activity of the granular sludge from the external circulationadded IC reactor started 26 d ago reaches 358.23mL·g -1 ·d -1 , 1.66 and 1.20 times as great as that of the sludge from the IC reactor started 26 d and 58 d ago respectively.
文摘The heavy metals in the atmosphere mainly come from the gas and dust which involved by the energy costs,transport,metallurgy and building materials production.Other than the element of Hg,the heavy metals come into the atmosphere in the form of aerosol basically and go into the soil through
基金Project(50808182) supported by the National Natural Science Foundation of ChinaProject(200806111004) supported by Doctoral Foundation of Ministry of Education of ChinaProject (2008-21) supported by Chongqing Construction Committee
文摘The porous tiles under the dry and wet conditions were studied. The simplified mathematical model was put forward to simulate the procedure of moisture evaporating for the densely porous tile. The results show that the capability of passive cooling of the porous tile is more than 5 ℃ with moisture content of 30% in Yangtze river region. Through the comparison between the measuring and simulating data,it can be proved that the simplified math model can be fully used to the engineering application,which provides a reference to explore the thermal performance of other porous material.
文摘Infrared spectrum and NMR chemical shifts of Si (CH3)2O double free radical were calculatedemploying density functional theory(DFT) with the basis sets 6 - 311 + G(2d, p). Excited states, dipole momentand energy of Si(CH3 )2O double free radical were also calculated using time dependent density function theory(TD-DFT) with the same basis sets. It is found that the external electric field along the X,Y and Z axis affectdifferently on the excited states and other properties of Si(CH3)2O double free radical.
基金financially supported by the Key Research and Development Program of Ningbo(Grant No.2023Z098)Natural Science Foundation of Inner Mongolia(Grant No.2023MS05040)+1 种基金Shenyang Collaborative Innovation Center Project for Multiple Energy Fields Composite Processing of Special Materials(Grant No.JG210027)Shenyang Key Technology Special Project of The Open Competition Mechanism to Select the Best Solution(Grant Nos.2022210101000827,2022-0-43-048).
文摘Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.
文摘Nowadays,with the rapid development of the society,autonomous learning becomes more and more important.Chinese university students have realized the importance of the autonomous learning but they are not good autonomous learners.The paper analyzes major factors influencing college students’autonomous learning,and then makes some suggestions on how to improve their autonomous English learning abilities.
文摘文中介绍了一种新的融合雷达和雨量计数据开展定量估测降水研究的空间信息统计学方法—Kriging with external drift(KED)方法。该方法能很好地融合高精度、低时空分辨率的雨量计数据和低精度、高时空分辨率的雷达数据进行插值。通过变异函数描述降水场的空间结构信息,能够充分利用数据间的空间相关性,来改进估测精度和提高处理速度。利用其优良的数学特性,以期在定量估测降水业务研究上进行新的探索和尝试。选用湖南省有代表意义的3次降水过程资料,通过雷达直接估测降水(RAD)、变分校准(VAR)以及KED3种方法,分别与雨量计测量值进行对比分析,选用代表站进行交叉验证结果均表明:RAD的均方差、绝对误差、相对误差最大,VAR次之,而KED最小。KED估测的结果与雨量计测量降水最为接近,估测效果最好;3种方法与雨量计实测值计算一定范围的误差频率,KED估测值具有最小的均方差和最小的标准差,且误差分布相对集中在0值附近,斜度和峰度最佳,试验证明该方法不仅能提高降水估测精度,且优于其他方法,VAR均方差次之,RAD均方差效果相对较差。联合雷达、雨量计估测降水的实质是把雷达估测值与雨量计测量的结果相融合,以雨量计来校准雷达估测值,保留了雷达探测到降水的中、小尺度精细特征。校准后的雨量场数值接近雨量计测值,而且能够准确反映雷达测得的降水分布形式。
基金Project(51221004)supported by the Science Fund for Creative Research Groups of National Natural Science Foundation of ChinaProject(2012AA041801)supproted by the High-tech Research and Development Program of China
文摘A nonlinear controller based on an extended second-order disturbance observer is presented to track desired position for an electro-hydraulic single-rod actuator in the presence of both external disturbances and parameter uncertainties. The proposed extended second-order disturbance observer deals with not only the external perturbations, but also parameter uncertainties which are commonly regarded as lumped disturbances in previous researches. Besides, the outer position tracking loop is designed with cylinder load pressure as output; and the inner pressure control loop provides the hydraulic actuator the characteristic of a force generator. The stability of the closed-loop system is provided based on Lyapunov theory. The performance of the controller is verified through simulations and experiments. The results demonstrate that the proposed nonlinear position tracking controller, together with the extended second-order disturbance observer, gives an excellent tracking performance in the presence of parameter uncertainties and external disturbance.
基金Sponsored by Optic-mechanical Integration Research and Design Technology Innovation Platform(20082108)
文摘Aimed at requirements, a kind of radar stabilized platform with external rotor and orthogonal shafts is designed. Its dynamic characters are analyzed by using finite element theory and ANSYS software. Also, a traditional stabilized platform with inner rotor is designed for comparison. It is shown that the new platform reduces two transmission links and 20% of precise components, its weight decreases by 20%, its natural frequency and rigidity are enlarged, the operating accuracy and stationary are increased. The new stabilized platform is more superiority and practicability. Its design method and analysis results have already been used in development mission. It provides helpful reference for similar structure designs.
文摘The intensity of external uncertain environments has urged more and more companies to adopt theentrepreneurial orientation strategy.But to translate the corporate entrepreneurial orientation intoorganizational performance,there must be certain transformation paths and the support from internalentrepreneurial environment.
基金one of the research findings of Open Fund of“Research Center for Sustainable Development of Three Gorges Reservoir Area”in2016(No:16sxxyjd04).
文摘An important part of the "Belt and Road " Initiative is to achieve people-to-people bonds. People-to-people bonds are certainly based on cultural self-confidence and cultural self-awareness. Cultural self-confidence is an important cultural strategy put forward by the party and the country in the vision of contemporary society,and an important deployment to realize the great rejuvenation of the Chinese nation. This paper first gives a brief overview of the advantages of cultural self-confidence in external communication,and then analyzes the opportunities and challenges that cultural self-confidence faces in external communication in the newera. Finally,it focuses on exploration on the external communication ways of cultural self-confidence in the "Belt and Road"Initiative. O nly based on the deep understanding of local culture can we can shape the soul of culture in the process of further opening-up and external communication to the outside world,and enhance the cultural self-aw areness of the people; build a solid foundation of culture and promote cultural exchanges with other countries.
