AutoReaGas was used for the simulations of premixed gas/air mixtures explosion characteristics in obstacle-filled tubes with a cross-section of 0.2 m×0.2 m and the length of 28 m. Numerical analyses provide a qua...AutoReaGas was used for the simulations of premixed gas/air mixtures explosion characteristics in obstacle-filled tubes with a cross-section of 0.2 m×0.2 m and the length of 28 m. Numerical analyses provide a quantitative description of dependence of flame propagation speed and explosion overpressure on obstacles number, blockage ratio and interval distance. Computational results indicate that the obstacles play a significant role in determining the flame transmission speed and explosion overpressure in gas explosions. With the increase of blockage ratio, the explosion overpressure gradually rises. Nevertheless, the flame speed does not always increase along with increasing blockage ratio, but subsequently begins to decrease as the blockage ratio increases to some extend. Also, the interval distance between obstacles strongly influences flame behavior and explosion overpressure. When the obstacle interval distance is equal to inner diameter of the tube, the average flame speed in the obstacle zone and the peak overpressure in tube all reach maximum values.展开更多
The influence factors and process of indoor gas explosion are studied with AutoReaGas explosion simulator. The result shows that venting pressure has great influence on the indoor gas explosion damage. The higher the ...The influence factors and process of indoor gas explosion are studied with AutoReaGas explosion simulator. The result shows that venting pressure has great influence on the indoor gas explosion damage. The higher the venting pressure is, the more serious the hazard consequence will be. The ignition location has also evident effect on the gas explosion damage. The explosion static overpressure would not cause major injury to person and serious damage to structure in the case of low venting pressure (lower than 2 kPa). The high temperature combustion after the explosion is the major factor to person injury in indoor gas explosion accidents.展开更多
To investigate the flame and overpressure characteristics of methane–air explosion with different obstacle configurations,an experimental study has been conducted,taking account of the number of obstacles,obstacle di...To investigate the flame and overpressure characteristics of methane–air explosion with different obstacle configurations,an experimental study has been conducted,taking account of the number of obstacles,obstacle distance from ignition source,and stream-wise and cross-wise obstacle positions.The results show that the flame speed and peak overpressure increase with the increasing number of obstacles,while the time to reach the peak is not fully determined by it.And the configuration having the farthest obstacle produces a higher overpressure and takes a longer time to reach the peak,but a slower flame propagation speed is obtained.Similar explosion characteristics are also observed in the configurations with two obstacles fixed at different stream-wise positions.Furthermore,the experimental results demonstrate that the peak overpressures and flame speeds in configurations with central or staggered obstacles are relatively higher,which should to be avoided in practical processes to minimize the risk associated with methane–air explosion.展开更多
In order to reveal the effect of turnings on explosion propagation, experiments were performed in three different pipes （single bend, U-shaped pipe and Z-shaped pipe）. Flame and pressure transducers were used to tra...In order to reveal the effect of turnings on explosion propagation, experiments were performed in three different pipes （single bend, U-shaped pipe and Z-shaped pipe）. Flame and pressure transducers were used to track the velocity at the explosion front. When the pipes were filled with methane, the explosion strength was significantly enhanced due to the turbulence induced by increasing the number of turnings, while the flame speed （Sf） and peak overpressure （ΔPmax） increased dramatically. In addition, the strength of the explosion increased in violence as a function of the number of turnings. However, when the bend was without methane, the turnings weakened the strength of the explosion compared with the ordinary pipe, shown by the decrease in the values of ΔPmax and Sf. In addition, the propagation characteristics in a U-shaped pipe were similar to those in a Z-shaped pipe and the values of APmax and Sf were also close. The results show that the explosion propagation characteristics largely depend on gas distribution in the pipes and the number of turnings. The different directions of the turnings had no effect.展开更多
文摘AutoReaGas was used for the simulations of premixed gas/air mixtures explosion characteristics in obstacle-filled tubes with a cross-section of 0.2 m×0.2 m and the length of 28 m. Numerical analyses provide a quantitative description of dependence of flame propagation speed and explosion overpressure on obstacles number, blockage ratio and interval distance. Computational results indicate that the obstacles play a significant role in determining the flame transmission speed and explosion overpressure in gas explosions. With the increase of blockage ratio, the explosion overpressure gradually rises. Nevertheless, the flame speed does not always increase along with increasing blockage ratio, but subsequently begins to decrease as the blockage ratio increases to some extend. Also, the interval distance between obstacles strongly influences flame behavior and explosion overpressure. When the obstacle interval distance is equal to inner diameter of the tube, the average flame speed in the obstacle zone and the peak overpressure in tube all reach maximum values.
文摘The influence factors and process of indoor gas explosion are studied with AutoReaGas explosion simulator. The result shows that venting pressure has great influence on the indoor gas explosion damage. The higher the venting pressure is, the more serious the hazard consequence will be. The ignition location has also evident effect on the gas explosion damage. The explosion static overpressure would not cause major injury to person and serious damage to structure in the case of low venting pressure (lower than 2 kPa). The high temperature combustion after the explosion is the major factor to person injury in indoor gas explosion accidents.
基金supported by the National Natural Science Foundation of China (Nos.51106044 and 51176021)the Research Foundation of Education Bureau of Henan Province of China (No.14A410007)
文摘To investigate the flame and overpressure characteristics of methane–air explosion with different obstacle configurations,an experimental study has been conducted,taking account of the number of obstacles,obstacle distance from ignition source,and stream-wise and cross-wise obstacle positions.The results show that the flame speed and peak overpressure increase with the increasing number of obstacles,while the time to reach the peak is not fully determined by it.And the configuration having the farthest obstacle produces a higher overpressure and takes a longer time to reach the peak,but a slower flame propagation speed is obtained.Similar explosion characteristics are also observed in the configurations with two obstacles fixed at different stream-wise positions.Furthermore,the experimental results demonstrate that the peak overpressures and flame speeds in configurations with central or staggered obstacles are relatively higher,which should to be avoided in practical processes to minimize the risk associated with methane–air explosion.
基金Financial support for this work, provided by the National Natural Science Foundation of China (No.50574093)the Key Program of the National Natural Science Foundation of China (No.50534090)+3 种基金the National Basic Research and Development Program of China (No.2005CB221506)the National Science Foundation for Young Scholars of China (No.50804048)the National Key Technology R&D Program (No.2007BAK29B01) Research Innovation Program for College Graduates of Jiangsu Provincethe Open Foundation of State Key Laboratory of Explosion Science and Technology (No.KFJJ10-19M)
文摘In order to reveal the effect of turnings on explosion propagation, experiments were performed in three different pipes （single bend, U-shaped pipe and Z-shaped pipe）. Flame and pressure transducers were used to track the velocity at the explosion front. When the pipes were filled with methane, the explosion strength was significantly enhanced due to the turbulence induced by increasing the number of turnings, while the flame speed （Sf） and peak overpressure （ΔPmax） increased dramatically. In addition, the strength of the explosion increased in violence as a function of the number of turnings. However, when the bend was without methane, the turnings weakened the strength of the explosion compared with the ordinary pipe, shown by the decrease in the values of ΔPmax and Sf. In addition, the propagation characteristics in a U-shaped pipe were similar to those in a Z-shaped pipe and the values of APmax and Sf were also close. The results show that the explosion propagation characteristics largely depend on gas distribution in the pipes and the number of turnings. The different directions of the turnings had no effect.
