The Chinese obsolete electric and electronic equipments (EEE) recycling and disposal system on the point of view of legislation, education and dissemination were discussed, because of the highly increasing volume of e...The Chinese obsolete electric and electronic equipments (EEE) recycling and disposal system on the point of view of legislation, education and dissemination were discussed, because of the highly increasing volume of electric and electronic products and that of its obsoletes today in China. The legislations and responsibilities of go- vernment, industry and consumer were discussed based on the balance of benefit and responsibility depending on the realization of their benefits in the whole life cycle of products and its status in the whole value chain. Not only the legislation and establishment of the so called “compulsory discarding system” will be a possible and effective solution to the difficulty of the obsolete collection and recycling for obsolete electric and electronic reclaiming industry, but also the education and dissemination. Education and dissemination were discussed as an important role which will emphasize the adjusting of policy and law on the development of electric and electronic industry production and its reclaiming. The education of stockholders’ environmental responsibility and the advocating of responsibility sharing should be implement for industry and consumer. Chinese EEE industry should emphasize the control of natural source, and should implement the environmental benign design in their production, such as design for dismantling, no dismantling, thermal treatment and green design. The perspectives for the way to advocate a harmonic society for Chinese people were described.展开更多
The end-of-life vehicle recycling was studied based on the disassembly. The end-of-life recycling and the disassembly were reviewed and discussed. A disassembly experiment of an end-of-life engine was carried out, whi...The end-of-life vehicle recycling was studied based on the disassembly. The end-of-life recycling and the disassembly were reviewed and discussed. A disassembly experiment of an end-of-life engine was carried out, which strictly recorded the process of dismantling. Based on the results, a model of the end-of-life recycling was presented. In this model, the end-of-life parts were classified by three ways which included to recycle directly, to recycle after remanufacturing and to discard. By using this model, the dismantling efficiency and the recycling rate can be improved. Also, it obtains a good result after used in a dismantling factory.展开更多
All over the world,the management of End-of-life Vehicles(ELV) and Automobile Shredder Residue(ASR) is an increasing issue for the car industry.The setting up of several environmental directives,among others the notio...All over the world,the management of End-of-life Vehicles(ELV) and Automobile Shredder Residue(ASR) is an increasing issue for the car industry.The setting up of several environmental directives,among others the notion of extended producer responsibility,encourage car manufacturers to find alternatives solutions to waste disposal.For 2017,China aims for the recyclability and energy recovery of 95% of total weight of used cars,and in order to reach this rate,the development of some ASR thermal processes could be envisaged.With this research,an overview of ELV management was given and the different solutions about ASR thermal treatment were presented.It is showed that in spite of its big heterogeneity,the high heating value of ASR makes pyrolysis and gasification very interesting,compared to incineration or disposal of in landfills.展开更多
The research and application of wireless local area networks （WLAN） technology are in a stage of rapid development. It has been one of research focuses of the wireless communications field. Through the use of enhanc...The research and application of wireless local area networks （WLAN） technology are in a stage of rapid development. It has been one of research focuses of the wireless communications field. Through the use of enhanced single-user （SU）/multi-user （MU） multiple input multiple output （MIMO）-orthogonal frequency division multiplexing （OFDM） technology, the next generation WLAN IEEE 802.1 lac dramatically increases the throughput. An improved MIMO-OFDM scheme based on modulation diversity is proposed for the next generation WLAN. It uses two-dimensional modulation diversity to the current IEEE 802.11ac transmission scheme. Through the space-time-frequency component inter- leaver and the rotational modulation, the proposed scheme ex- hibits high spectral efficiency and low error rate in fading channels. The simulation results show that the proposed scheme significantly outperforms the SU/MU MIMO-OFDM scheme in the current IEEE 802.11 ac standard, which is up to 5 dB.展开更多
文摘The Chinese obsolete electric and electronic equipments (EEE) recycling and disposal system on the point of view of legislation, education and dissemination were discussed, because of the highly increasing volume of electric and electronic products and that of its obsoletes today in China. The legislations and responsibilities of go- vernment, industry and consumer were discussed based on the balance of benefit and responsibility depending on the realization of their benefits in the whole life cycle of products and its status in the whole value chain. Not only the legislation and establishment of the so called “compulsory discarding system” will be a possible and effective solution to the difficulty of the obsolete collection and recycling for obsolete electric and electronic reclaiming industry, but also the education and dissemination. Education and dissemination were discussed as an important role which will emphasize the adjusting of policy and law on the development of electric and electronic industry production and its reclaiming. The education of stockholders’ environmental responsibility and the advocating of responsibility sharing should be implement for industry and consumer. Chinese EEE industry should emphasize the control of natural source, and should implement the environmental benign design in their production, such as design for dismantling, no dismantling, thermal treatment and green design. The perspectives for the way to advocate a harmonic society for Chinese people were described.
文摘The end-of-life vehicle recycling was studied based on the disassembly. The end-of-life recycling and the disassembly were reviewed and discussed. A disassembly experiment of an end-of-life engine was carried out, which strictly recorded the process of dismantling. Based on the results, a model of the end-of-life recycling was presented. In this model, the end-of-life parts were classified by three ways which included to recycle directly, to recycle after remanufacturing and to discard. By using this model, the dismantling efficiency and the recycling rate can be improved. Also, it obtains a good result after used in a dismantling factory.
文摘All over the world,the management of End-of-life Vehicles(ELV) and Automobile Shredder Residue(ASR) is an increasing issue for the car industry.The setting up of several environmental directives,among others the notion of extended producer responsibility,encourage car manufacturers to find alternatives solutions to waste disposal.For 2017,China aims for the recyclability and energy recovery of 95% of total weight of used cars,and in order to reach this rate,the development of some ASR thermal processes could be envisaged.With this research,an overview of ELV management was given and the different solutions about ASR thermal treatment were presented.It is showed that in spite of its big heterogeneity,the high heating value of ASR makes pyrolysis and gasification very interesting,compared to incineration or disposal of in landfills.
基金supported by the National Natural Science Foundation of China(61171101)the National Great Science Specific Project of China(2009ZX03003-011-03)
文摘The research and application of wireless local area networks （WLAN） technology are in a stage of rapid development. It has been one of research focuses of the wireless communications field. Through the use of enhanced single-user （SU）/multi-user （MU） multiple input multiple output （MIMO）-orthogonal frequency division multiplexing （OFDM） technology, the next generation WLAN IEEE 802.1 lac dramatically increases the throughput. An improved MIMO-OFDM scheme based on modulation diversity is proposed for the next generation WLAN. It uses two-dimensional modulation diversity to the current IEEE 802.11ac transmission scheme. Through the space-time-frequency component inter- leaver and the rotational modulation, the proposed scheme ex- hibits high spectral efficiency and low error rate in fading channels. The simulation results show that the proposed scheme significantly outperforms the SU/MU MIMO-OFDM scheme in the current IEEE 802.11 ac standard, which is up to 5 dB.
