With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite...With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite(Jar)and schwertmannite(Sch)were biosynthesized using Acidithiobacillus ferrooxidans for the adsorption of REEs.Additionally,the adsorption capacities of Jar and Sch for La^(3+),Ce^(3+),Pr^(3+),Nd^(3+),Sm^(3+),Gd^(3+),Dy^(3+),and Y^(3+)in mine wastewater were improved by mechanical activation.XRD,FTIR,BET,and SEM-EDS analyses revealed that mechanical activation did not alter the phase of the material,but increased the amount of surface-OH and SO42−groups,as well as the specific surface area.This significantly enhanced the adsorption performance of Jar and Sch for REEs.The optimum adsorption time and pH were determined through batch adsorption experiments.Besides,the adsorption kinetics were studied and found to align well with the pseudo-second-order model.Furthermore,the thermodynamic parameters(ΔG^(Θ),ΔH^(Θ)andΔS^(Θ))and adsorption isotherms were analyzed.The results indicated that mechanically activated schwertmannite(M-Sch)exhibited superior adsorption performance for REEs compared to mechanically activated jarosite(M-Jar).Moreover,M-Sch was reusable and exhibited high adsorption efficiency of REEs in actual mine wastewater,exceeding 92%.展开更多
Improving interfacial bonding and alloying design are effective strategies for enhancing mechanical properties of particle-reinforced steel matrix composites(SMCs).This study prepared SMCs with uniformly distributed T...Improving interfacial bonding and alloying design are effective strategies for enhancing mechanical properties of particle-reinforced steel matrix composites(SMCs).This study prepared SMCs with uniformly distributed TiC_(P)in matrix using master alloying method.The TiC(002)/Fe(011)interface model was established based on the orientation relationship of(011)_(Fe)//(002)_(TiC),and[100]_(Fe)//[100]_(TiC).The effects of single and co-doping of alloying elements(Mn,Cr,Mo,Ni,Cu and Si)on the interface bonding behavior of TiC/Fe in composites were investigated in conjunction with first principles.The results demonstrate that the interface between TiC and matrix is continuous and stable.Compared to the undoped TiC/Fe interface,single-doping Mn,Cr,and Mo can improve the stability of TiC/Fe interface and enhance tensile strength.Conversely,single-doping with Ni,Cu,and Si reduced the interface stability and marginally reduces tensile strength.Relative to the undoped and singly Ni-doped TiC/Fe interfaces,the co-doping Ni-Mo boosts binding energy and separation work at the TiC/Fe interface,which is conducive to the interface bonding between TiC_(P)and matrix,and thus improves the mechanical properties of composites.Thus,in the alloying design of TiC particle reinforced low-alloy SMCs,incorporating Mn,Cr,Mo,and Ni into matrix can enhance the overall mechanical properties of composites.展开更多
A feasible approach to selectively recover iron and rare earth elements(REEs)from red mud through acid leaching-coordination-solvent extraction was proposed.The leaching efficiencies of Fe,Al,Ti,Sc,La,Ce,Nd and Y can ...A feasible approach to selectively recover iron and rare earth elements(REEs)from red mud through acid leaching-coordination-solvent extraction was proposed.The leaching efficiencies of Fe,Al,Ti,Sc,La,Ce,Nd and Y can reach up to 95.9%,82.1%,68.3%,93.3%,82.3%,96.9%,98.3%and 95.6%,respectively,under the optimal condition in the leaching process.Aliquat 336 showed excellent extraction performance of iron in chloride-rich solution,and the maximum extraction efficiency can reach over 96%in one time extraction while the loss of other metals was less than 10%,under the condition of Aliquat 336 concentration(v/v)of 30%,aqueous-organic ratio of 1.0 and extraction time of 20 min.Furthermore,P204 can effectively extract the scandium while Al and most other REEs remain in the aqueous phase.This approach may provide a new insight for the recovery of valuable resources from red mud.展开更多
An element coupling model (ECM) method was proposed to simulate the global behavior and local damage of a structure.In order to reflect the local damage and improve the computational efficiency,three-dimensional (3D) ...An element coupling model (ECM) method was proposed to simulate the global behavior and local damage of a structure.In order to reflect the local damage and improve the computational efficiency,three-dimensional (3D) solid elements and one-dimensional (1D) beam element were coupled by the multi-point constraint equations.A reduced scale 1?8 model test was simulated by the ECM and a full three dimensional model (3DM) contrastively.The results show that the global behavior and local damages of ECM agree well with the test and 3DM.It is indicated that the proposed method can be used in the structural nonlinear analysis accurately and efficiently.展开更多
Rare earth element （REE） concentrations were measured by ICP-MS for groundwater collected from deep seated Taiyuan Fm limestone aquifer （from -400 to -530 m） in Renlou Coal Mine, northern Anhui Province, China. It...Rare earth element （REE） concentrations were measured by ICP-MS for groundwater collected from deep seated Taiyuan Fm limestone aquifer （from -400 to -530 m） in Renlou Coal Mine, northern Anhui Province, China. It can be concluded that the groundwater is warm （34.0-37.2 ℃） C1-Ca, Na type water with circum-neutral pH （7.35-8.28） and high total dissolved solids （TDS, 1 746-2 849 mg/L）. The groundwater exhibits heavy REEs enrichment relative to light REEs compared with Post Archean Average Shale （PAAS）, as well as their aquifer rocks （limestone）. The enrichment of REEs is considered to be controlled by terrigeneous materials （e.g. zircon） in aquifer rocks, whereas the fractionation of REEs is controlled by marine derived materials （e.g. calcite）, to a less extent, terrigeneous materials and inorganic complexation. The Ce anomalies normalized to PAAS and aquifer rocks are weak, which probably reflects the signature of the aquifer rock rather than redox conditions or pH. The similarities of REE patterns between groundwater and aquifer rocks imply that aquifer rocks play important roles in controlling the REE characteristics of groundwater, and then provide a probability for discrimination of groundwater sources by using REEs.展开更多
Phosphogypsum(PG)is a potential resource for rare earth elements(REEs).Several studies have been carried out on REE leaching from PG.However,few in-depth studies have investigated the kinetics of this leaching process...Phosphogypsum(PG)is a potential resource for rare earth elements(REEs).Several studies have been carried out on REE leaching from PG.However,few in-depth studies have investigated the kinetics of this leaching process.In this study,the leaching kinetics of REEs from PG in nitric acid at different temperatures were explored in depth.The experiments show that the maximum leaching recovery for ΣREE was 58.5%,75.9%and 83.4%at 30,60 and 80℃,respectively.Additionally,among La,Ce,Y and Nd,Y had the highest leaching rate.A new shrinking core model(SCM)based on the dissolution reaction of a cylindrical solid particle with interfacial transfer and diffusion across the product layer as the rate-controlling step was deduced and could well fit the leaching process of REEs from PG.The activation energies for the leaching of La,Ce,Y and Nd were determined on the basis of the new cylindrical SCM.In summary,the cylindrical SCM was a more suitable fitting model than the spherical SCM,and the interfacial transfer and diffusion across the product layer were the rate-controlling step for REE leaching from the PG sample.展开更多
The contents ofMg, Al, Si, Ti, Cr, Mn, Fe, Co, Cu, Ga, As, Se, Cd, Sb, Pb and Bi in high purity nickel were determined by high resolution inductively coupled plasma mass spectrometry （HR-ICP-MS）. The sample was diss...The contents ofMg, Al, Si, Ti, Cr, Mn, Fe, Co, Cu, Ga, As, Se, Cd, Sb, Pb and Bi in high purity nickel were determined by high resolution inductively coupled plasma mass spectrometry （HR-ICP-MS）. The sample was dissolved in HNO3 and HCI by microwave digestion. Most of the spectral interferences could be avoided by measuring in the high resolution mode. The matrix effects because of the presence of excess HC1 and nickel were evaluated. Correction for matrix effects was made using Sc, Rh and T1 as internal standards. The optimum conditions for the determination were tested and discussed. The detection limits range from 0.012 to 1.76 ~tg/g depending on the type of elements. The applicability of the proposed method is also validated by the analysis of high purity nickel reference material （NIST SRM 671）. The relative standard deviation （RSD） is less than 3.3%. Results for determination of trace elements in high purity nickel were presented.展开更多
Eleven important medicinal plants generally used by the people of Turkey for the treatment of common cold have been studied for their mineral contents.Eleven minor and major elements(essential,non-essential and toxic)...Eleven important medicinal plants generally used by the people of Turkey for the treatment of common cold have been studied for their mineral contents.Eleven minor and major elements(essential,non-essential and toxic)were identified in the Asplenium adiantum-nigrum L.,Althaea officinalis L.,Verbascum phlomoides L.,Euphorbia chamaesyce L.,Zizyphus jujube Miller,Peganum harmala L.,Arum dioscoridis Sm.,Sambucus nigra L.,Piper longum L.,Tussilago farfara L.and Elettaria cardamomum Maton by employing flame atomic absorption and emission spectrometry and electro-thermal atomic absorption spectrometry.Microwave digestion procedure for total concentration was applied under optimized conditions for dissolution of medicinal plants.Plant based biological certified reference materials(CRMs)served as standards for quantification.These elements are found to be present in varying concentrations in the studied plants.The baseline data presented in this work can be used in understanding the role of essential,non-essential and toxic elements in nutritive,preventive and therapeutic properties of medicinal plants.展开更多
An analytical method for the determination of 26 impurity elements （such as Li, Be, Na, Mg, Al, Si, P, S, K, Ca, Sc, Ti, V, Cr, Co, Ni, Ga, Ge, Y, Nb, Mo, Ag, Cd, Sb, W and Pb） in MnZn ferrite powder by direct curre...An analytical method for the determination of 26 impurity elements （such as Li, Be, Na, Mg, Al, Si, P, S, K, Ca, Sc, Ti, V, Cr, Co, Ni, Ga, Ge, Y, Nb, Mo, Ag, Cd, Sb, W and Pb） in MnZn ferrite powder by direct current glow discharge mass spectrometry （GD-MS） was established. MnZn ferrite powder was mixed with copper powder, used as a conductor, and pressed. The effects of MnZn ferrite powder preparation conditions and glow discharge parameters for the sensitivity and stability of signal analysis were investigated. By determining the choice of isotope and the application of the mass resolutions of 4000 （MR, medium resolution） and 10000 （HR, high resolution）, mass spectral interference was eliminated. The contents of impurity elements in MnZn ferrite powder was calculated by subtraction after normalizing the total signal of Mn, Zn, Fe, O and Cu. The results showed that the detection limit of 26 kinds of impurity elements was between 0.002 and 0.57 μg/g, and the relative standard deviation （RSD） was between 3.33% and 32.35%. The accuracy of this method was verified by the ICP-MS. The method was simple and practical, which is applied to the determination of impurity elements in MnZn ferrite powder.展开更多
This paper, probing into heavy metal control in domestic rubbish by source screening and nutrient element analysis, revealed the feasibility of source control of heavy metals and the suitability of rubbish as turfgras...This paper, probing into heavy metal control in domestic rubbish by source screening and nutrient element analysis, revealed the feasibility of source control of heavy metals and the suitability of rubbish as turfgrass medium. Heavy metals in domestic rubbish were controlled by source screening before composting. The study consisted of a control with garden soil. The contents of main mineral elements and heavy metals in rubbish compost and control were determined by the method of ICP-AES. The results showed that heavy metal concentrations in rubbish were lower than those in garden soil, and little difference occurred between rubbish and garden soil in main mineral element concentrations. Based on this, it was concluded that rubbish compost was favorable for using as turfgrass medium and heavy metal control in rubbish by source screening was effective.展开更多
Thermodynamic properties and electrochemical behaviors of gold and its associated elements, such as silver, copper, nickel and iron, in various complex agent solutions were studied. Within CS（NH2）2, S2O2-3 and SCN- ...Thermodynamic properties and electrochemical behaviors of gold and its associated elements, such as silver, copper, nickel and iron, in various complex agent solutions were studied. Within CS（NH2）2, S2O2-3 and SCN- systems, alkaline thiourea is the optimal nontoxic lixiviating agent substituting cyanide from the viewpoint of thermodynamics. The electrochemical study indicates that the anodic dissolution current densities of gold are 2.616, （1.805,） 1.267, 1.088, 0.556, and 0.145 mA·cm-2 respectively in the solutions of cyanide, alkaline thiourea containing Na2SiO3, SCN-, acidic thiourea, alkaline thiourea and thiosulfate at the potential of 0.500 V. Comparing various lixiviating agents, the alkaline thiourea solution containing Na2SiO3 is of prominent selectivity in leaching gold, in the potential range from 0.500 to 0.600 V, which is most efficient for leaching gold selectively instead of cyanide. The effect on leaching gold is similar to that in the cyanide system.展开更多
In the present paper,the authors analysed 10 mineral elements in the roots of Rheum tanguticum collected from 30 different habitats.The mean concentration values of the 10 elements decreased as follows: Ca>Mg>K&...In the present paper,the authors analysed 10 mineral elements in the roots of Rheum tanguticum collected from 30 different habitats.The mean concentration values of the 10 elements decreased as follows: Ca>Mg>K>Fe>Mn>Cr>Zn>Ni>Cu>Se. Ca,Mg,K and Fe were abundant in this herb.Most elements varied over a wide range depending on the different habitats.The mineral element data were evaluated by principal component analysis to reveal the distribution pattern of elements in root.Four principal components(K-Ca factor,Cu factor,Mg factor and Zn-Se factor) of plant elements were selected.The authors' study provided a new scientific foundation for further studies and general application of this Chinese herb.展开更多
The sudangrass(Sorghumsudanense) and ryegrass(Lolium multiflorum L.) rotation is a newtype of cropping system,which has developed rapidly in recent years in the south of China.The contents ofnutritional elements for f...The sudangrass(Sorghumsudanense) and ryegrass(Lolium multiflorum L.) rotation is a newtype of cropping system,which has developed rapidly in recent years in the south of China.The contents ofnutritional elements for forage grass in the sudangrass and ryegrass rotation system were determined by ICP-AES.The results showed that there were abundant and essential nutritional elements for ani mals in sudangrassand ryegrass.The contents of P,K,Ca,Mg,S,Fe,B,Cu,Zn and Mn for sudangrass were 0.20 %～0.29 %,1.94 %～2.57 %,0.62 %～0.97 %,0.39 %～0.69 %,0.12 %～0.18 %,108.35 ～180.12,3.04 ～5.96,6.17 ～10.02,20.37 ～31.36 and 46.80 ～101.29 mg.kg-1,respectively.The contents of P,K,Ca,Mg,S,Fe,B,Cu,Zn,Mn for ryegrass were 0.39 %～0.70 %,3.77 %～5.07 %,0.61 %～0.84 %,0.28 %～0.47 %,0.32 %～0.41 %,291.65 ～632.20,2.13 ～3.23,13.29 ～15.19,30.73 ～42.98 and 92.08 ～156.04 mg.kg-1,respectively,and there were differences between various periods in nutritional elements inthe two forage grasses.The application of ICP-AES could reflect fast and efficiently the content of nutritionalelements for forage grass as ani mals feed.展开更多
The western Tianshan high-pressure(HP) metamorphic belt represents the paleosubduction mélange of paleozoic south Tianshan ocean between the Yili-central Tianshan and Tarim plates. High-pressure veins are extensi...The western Tianshan high-pressure(HP) metamorphic belt represents the paleosubduction mélange of paleozoic south Tianshan ocean between the Yili-central Tianshan and Tarim plates. High-pressure veins are extensively developed in this HP belt. Compared with normal mid-ocean ridge basalt(N-MORB), the high-pressure veins and host rocks are enriched in light rare earth elements(LREE) and incompatible elements. But high-pressure veins show a larger variation than host rocks in total REE abundance. On the trace element spidergram, all the samples are enriched in incompatible elements and show strong positive Pb anomaly relative to N-MORB. The array tendency lines of plots of the HP rocks have apparent slopes on diagram of m(Sr) vs m(Sr)/m(Zr), m(Li) vs m(Li)/m(Y) and (m(Ce)) vs m(Ce)/m(Pb), which indicates that the enrichment in LREE and incompatible elements relative to N-MORB of the HP-metamorphic rocks from western Tianshan is not attributed to magma evolution process of the protolith. High field strength elements, such as Nb, Ta, Ti, Zr and Hf, do not show negative anomaly relative to N-MORB, which is dissimilar to that of island arc basalts. Therefore, the enrichment in LREE and incompatible elements of the HP rocks is not attributed to the enrichment of the source of the protolith. The mass ratios of Rb to Ba, Ce to Pb, Nb to U and Ta to U of high-pressure veins and host rocks are intermediate of mid-ocean ridge basalt or oceanic island basalt and continental crust. The fluids in western Tianshan paleosubduction zones are mixtures of two sources, dehydration or devolatilization of host rocks and of subducted sediments.展开更多
This paper gives an analysis of the dynamic characteristics of situation elements(SEs) in situation awareness(SA)research. The purpose of the discussion is to understand the factors that influence SA and to help in de...This paper gives an analysis of the dynamic characteristics of situation elements(SEs) in situation awareness(SA)research. The purpose of the discussion is to understand the factors that influence SA and to help in designing the training systems to improve operators’ SA. The status function of SEs is defined and the derivative of the function represents trends of the status of SEs at each moment. Then, Fourier transform(FT) is used to give the frequency-domain function in terms of the time-domain status function. In frequency domain, the bandwidth of the status function is used as a criterion to characterize the notion of "fast" and"slow" of the change of SE’s status, which represents the dynamic characteristic of SEs. The criterion constitutes the first analytical measurement of the dynamic characteristic of SEs, which is one of the important factors that influence the SA process.展开更多
Traditional multi-band frequency selective surface （FSS） approaches are hard to achieve a perfect resonance response in a wide band due to the limit of the onset grating lobe frequency determined by the array. To so...Traditional multi-band frequency selective surface （FSS） approaches are hard to achieve a perfect resonance response in a wide band due to the limit of the onset grating lobe frequency determined by the array. To solve this problem, an approach of combining elements in different period to build a hybrid array is presented. The results of series of numerical simulation show that multi-periodicity combined element FSS, which are designed using this approach, usually have much weaker grating lobes than the traditional FSS. Furthermore, their frequency response can be well predicted through the properties of their member element FSS. A prediction method for estimating the degree of expected grating lobe energy loss in designing multi-band FSS using this approach is provided.展开更多
An inductively coupled plasma mass spectrometry(ICP-MS) method was developed for the determination of Na, Mg, Al,K, Ca, Ti, Cr, Co, Ni, Cu, Ga, As, Mo, Ag, Cd and Pb in MnZn ferrites. The sample was digested by HNO3+H...An inductively coupled plasma mass spectrometry(ICP-MS) method was developed for the determination of Na, Mg, Al,K, Ca, Ti, Cr, Co, Ni, Cu, Ga, As, Mo, Ag, Cd and Pb in MnZn ferrites. The sample was digested by HNO3+HCl with microwave digestion followed by dilution with ultrapure water, then the above 16 impurity elements in the solution were analyzed directly by ICP-MS. The impurity elements were introduced by the helium gas or hydrogen gas into the octopole reaction system(ORS) to eliminate the polyatomic interferences caused by the high salty matrixes. The matrix effect was minimized through matrix matching,and Be, Y and Rh were used as internal standard elements. The working parameters of the instrument were optimized. The results show that the method has good precision and high accuracy. The detection limits for the investigated elements are in the range of0.9-37.5 ng/L, the relative standard deviation of each element is within 1.1%-4.8%, and the recovery of each element is 90%-108%.展开更多
Drinking water supply for the Main Ethiopian Rift (MER) area principally relies on groundwater wells and springs and is characterized by fluoride contamination. New analyses reveal that the F^- geochemical anomaly is ...Drinking water supply for the Main Ethiopian Rift (MER) area principally relies on groundwater wells and springs and is characterized by fluoride contamination. New analyses reveal that the F^- geochemical anomaly is associated with other potentially toxic elements such as As,B,Mo,U,Al,Fe and Mn. Particularly,35%of the 23 investigated groundwater wells and 70%of the 14 hot springs(and展开更多
The content of trace elements in quartz has great importance for quality estimation of quartz raw material used for monocrystals synthesis and glass melting.Entering forms of trace elements in major economic types of ...The content of trace elements in quartz has great importance for quality estimation of quartz raw material used for monocrystals synthesis and glass melting.Entering forms of trace elements in major economic types of vein quartz and rock crystals from the Subpolar Urals were studied using ISP-OES, electron microscopy,gas chromatography and radiospectroscopy.There were analyzed behavior impurities elements contents in quartz展开更多
基金Project(2022YFC2105300) supported by the National Key Research and Development Program of ChinaProject(52274288) supported by the National Natural Science Foundation of China。
文摘With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite(Jar)and schwertmannite(Sch)were biosynthesized using Acidithiobacillus ferrooxidans for the adsorption of REEs.Additionally,the adsorption capacities of Jar and Sch for La^(3+),Ce^(3+),Pr^(3+),Nd^(3+),Sm^(3+),Gd^(3+),Dy^(3+),and Y^(3+)in mine wastewater were improved by mechanical activation.XRD,FTIR,BET,and SEM-EDS analyses revealed that mechanical activation did not alter the phase of the material,but increased the amount of surface-OH and SO42−groups,as well as the specific surface area.This significantly enhanced the adsorption performance of Jar and Sch for REEs.The optimum adsorption time and pH were determined through batch adsorption experiments.Besides,the adsorption kinetics were studied and found to align well with the pseudo-second-order model.Furthermore,the thermodynamic parameters(ΔG^(Θ),ΔH^(Θ)andΔS^(Θ))and adsorption isotherms were analyzed.The results indicated that mechanically activated schwertmannite(M-Sch)exhibited superior adsorption performance for REEs compared to mechanically activated jarosite(M-Jar).Moreover,M-Sch was reusable and exhibited high adsorption efficiency of REEs in actual mine wastewater,exceeding 92%.
基金Project supported by the Special Funding Support for the Development of 1500 Meter Subsea Christmas Tree and Control System,China。
文摘Improving interfacial bonding and alloying design are effective strategies for enhancing mechanical properties of particle-reinforced steel matrix composites(SMCs).This study prepared SMCs with uniformly distributed TiC_(P)in matrix using master alloying method.The TiC(002)/Fe(011)interface model was established based on the orientation relationship of(011)_(Fe)//(002)_(TiC),and[100]_(Fe)//[100]_(TiC).The effects of single and co-doping of alloying elements(Mn,Cr,Mo,Ni,Cu and Si)on the interface bonding behavior of TiC/Fe in composites were investigated in conjunction with first principles.The results demonstrate that the interface between TiC and matrix is continuous and stable.Compared to the undoped TiC/Fe interface,single-doping Mn,Cr,and Mo can improve the stability of TiC/Fe interface and enhance tensile strength.Conversely,single-doping with Ni,Cu,and Si reduced the interface stability and marginally reduces tensile strength.Relative to the undoped and singly Ni-doped TiC/Fe interfaces,the co-doping Ni-Mo boosts binding energy and separation work at the TiC/Fe interface,which is conducive to the interface bonding between TiC_(P)and matrix,and thus improves the mechanical properties of composites.Thus,in the alloying design of TiC particle reinforced low-alloy SMCs,incorporating Mn,Cr,Mo,and Ni into matrix can enhance the overall mechanical properties of composites.
基金Project(21707167)supported by the Natural Science Foundation of China
文摘A feasible approach to selectively recover iron and rare earth elements(REEs)from red mud through acid leaching-coordination-solvent extraction was proposed.The leaching efficiencies of Fe,Al,Ti,Sc,La,Ce,Nd and Y can reach up to 95.9%,82.1%,68.3%,93.3%,82.3%,96.9%,98.3%and 95.6%,respectively,under the optimal condition in the leaching process.Aliquat 336 showed excellent extraction performance of iron in chloride-rich solution,and the maximum extraction efficiency can reach over 96%in one time extraction while the loss of other metals was less than 10%,under the condition of Aliquat 336 concentration(v/v)of 30%,aqueous-organic ratio of 1.0 and extraction time of 20 min.Furthermore,P204 can effectively extract the scandium while Al and most other REEs remain in the aqueous phase.This approach may provide a new insight for the recovery of valuable resources from red mud.
基金Project(2007CB714202) supported by the National Key Basic Research Program of ChinaProject(SLDRCE10-B-07) supported by theMinistry of Science and Technology of China
文摘An element coupling model (ECM) method was proposed to simulate the global behavior and local damage of a structure.In order to reflect the local damage and improve the computational efficiency,three-dimensional (3D) solid elements and one-dimensional (1D) beam element were coupled by the multi-point constraint equations.A reduced scale 1?8 model test was simulated by the ECM and a full three dimensional model (3DM) contrastively.The results show that the global behavior and local damages of ECM agree well with the test and 3DM.It is indicated that the proposed method can be used in the structural nonlinear analysis accurately and efficiently.
基金Project(40873015) supported by the National Natural Science Foundation of ChinaProject(08010302062) supported by the Eleventh Five-year Scientific and Technological Program of Anhui Province,China
文摘Rare earth element （REE） concentrations were measured by ICP-MS for groundwater collected from deep seated Taiyuan Fm limestone aquifer （from -400 to -530 m） in Renlou Coal Mine, northern Anhui Province, China. It can be concluded that the groundwater is warm （34.0-37.2 ℃） C1-Ca, Na type water with circum-neutral pH （7.35-8.28） and high total dissolved solids （TDS, 1 746-2 849 mg/L）. The groundwater exhibits heavy REEs enrichment relative to light REEs compared with Post Archean Average Shale （PAAS）, as well as their aquifer rocks （limestone）. The enrichment of REEs is considered to be controlled by terrigeneous materials （e.g. zircon） in aquifer rocks, whereas the fractionation of REEs is controlled by marine derived materials （e.g. calcite）, to a less extent, terrigeneous materials and inorganic complexation. The Ce anomalies normalized to PAAS and aquifer rocks are weak, which probably reflects the signature of the aquifer rock rather than redox conditions or pH. The similarities of REE patterns between groundwater and aquifer rocks imply that aquifer rocks play important roles in controlling the REE characteristics of groundwater, and then provide a probability for discrimination of groundwater sources by using REEs.
基金Project(51904104) supported by the National Natural Science Foundation of ChinaProject(2020JJ5174) supported by the Natural Science Foundation of Hunan Province,China+2 种基金Project(2019M662780) supported by China Postdoctoral Science FoundationProject(19C0746) supported by Scientific Research Fund of Hunan Provincial Education Department,ChinaProject(2021-2843) supported by College Student Innovation and Entrepreneurship Training Program of Hunan Province,China。
文摘Phosphogypsum(PG)is a potential resource for rare earth elements(REEs).Several studies have been carried out on REE leaching from PG.However,few in-depth studies have investigated the kinetics of this leaching process.In this study,the leaching kinetics of REEs from PG in nitric acid at different temperatures were explored in depth.The experiments show that the maximum leaching recovery for ΣREE was 58.5%,75.9%and 83.4%at 30,60 and 80℃,respectively.Additionally,among La,Ce,Y and Nd,Y had the highest leaching rate.A new shrinking core model(SCM)based on the dissolution reaction of a cylindrical solid particle with interfacial transfer and diffusion across the product layer as the rate-controlling step was deduced and could well fit the leaching process of REEs from PG.The activation energies for the leaching of La,Ce,Y and Nd were determined on the basis of the new cylindrical SCM.In summary,the cylindrical SCM was a more suitable fitting model than the spherical SCM,and the interfacial transfer and diffusion across the product layer were the rate-controlling step for REE leaching from the PG sample.
基金Project(21075138) supported by the National Natural Science Foundation of ChinaProject(cstc2011jjA0780) supported by Natural Science Foundation of Chongqing City,ChinaProject(KJ121311) supported by Educational Commission of Chongqing City of China
文摘The contents ofMg, Al, Si, Ti, Cr, Mn, Fe, Co, Cu, Ga, As, Se, Cd, Sb, Pb and Bi in high purity nickel were determined by high resolution inductively coupled plasma mass spectrometry （HR-ICP-MS）. The sample was dissolved in HNO3 and HCI by microwave digestion. Most of the spectral interferences could be avoided by measuring in the high resolution mode. The matrix effects because of the presence of excess HC1 and nickel were evaluated. Correction for matrix effects was made using Sc, Rh and T1 as internal standards. The optimum conditions for the determination were tested and discussed. The detection limits range from 0.012 to 1.76 ~tg/g depending on the type of elements. The applicability of the proposed method is also validated by the analysis of high purity nickel reference material （NIST SRM 671）. The relative standard deviation （RSD） is less than 3.3%. Results for determination of trace elements in high purity nickel were presented.
基金Financial support from the Unit of the Scientific Research Projects of Innü University(Grant no:2008/34)
文摘Eleven important medicinal plants generally used by the people of Turkey for the treatment of common cold have been studied for their mineral contents.Eleven minor and major elements(essential,non-essential and toxic)were identified in the Asplenium adiantum-nigrum L.,Althaea officinalis L.,Verbascum phlomoides L.,Euphorbia chamaesyce L.,Zizyphus jujube Miller,Peganum harmala L.,Arum dioscoridis Sm.,Sambucus nigra L.,Piper longum L.,Tussilago farfara L.and Elettaria cardamomum Maton by employing flame atomic absorption and emission spectrometry and electro-thermal atomic absorption spectrometry.Microwave digestion procedure for total concentration was applied under optimized conditions for dissolution of medicinal plants.Plant based biological certified reference materials(CRMs)served as standards for quantification.These elements are found to be present in varying concentrations in the studied plants.The baseline data presented in this work can be used in understanding the role of essential,non-essential and toxic elements in nutritive,preventive and therapeutic properties of medicinal plants.
基金Project(21275162)supported by the National Natural Science Foundation of ChinaProject(KJZH14217)supported by the Achievement Transfer Program of Institutions of Higher Education in Chongqing,ChinaProject(KJ1601224)supported by the Scientific and Technological Research Program of Chongqing Municipal Education Commission,China
文摘An analytical method for the determination of 26 impurity elements （such as Li, Be, Na, Mg, Al, Si, P, S, K, Ca, Sc, Ti, V, Cr, Co, Ni, Ga, Ge, Y, Nb, Mo, Ag, Cd, Sb, W and Pb） in MnZn ferrite powder by direct current glow discharge mass spectrometry （GD-MS） was established. MnZn ferrite powder was mixed with copper powder, used as a conductor, and pressed. The effects of MnZn ferrite powder preparation conditions and glow discharge parameters for the sensitivity and stability of signal analysis were investigated. By determining the choice of isotope and the application of the mass resolutions of 4000 （MR, medium resolution） and 10000 （HR, high resolution）, mass spectral interference was eliminated. The contents of impurity elements in MnZn ferrite powder was calculated by subtraction after normalizing the total signal of Mn, Zn, Fe, O and Cu. The results showed that the detection limit of 26 kinds of impurity elements was between 0.002 and 0.57 μg/g, and the relative standard deviation （RSD） was between 3.33% and 32.35%. The accuracy of this method was verified by the ICP-MS. The method was simple and practical, which is applied to the determination of impurity elements in MnZn ferrite powder.
基金NationalNaturalScienceFoundation (59878033)Tianjin Science and Technology Developm entProgram (043100611).
文摘This paper, probing into heavy metal control in domestic rubbish by source screening and nutrient element analysis, revealed the feasibility of source control of heavy metals and the suitability of rubbish as turfgrass medium. Heavy metals in domestic rubbish were controlled by source screening before composting. The study consisted of a control with garden soil. The contents of main mineral elements and heavy metals in rubbish compost and control were determined by the method of ICP-AES. The results showed that heavy metal concentrations in rubbish were lower than those in garden soil, and little difference occurred between rubbish and garden soil in main mineral element concentrations. Based on this, it was concluded that rubbish compost was favorable for using as turfgrass medium and heavy metal control in rubbish by source screening was effective.
文摘Thermodynamic properties and electrochemical behaviors of gold and its associated elements, such as silver, copper, nickel and iron, in various complex agent solutions were studied. Within CS（NH2）2, S2O2-3 and SCN- systems, alkaline thiourea is the optimal nontoxic lixiviating agent substituting cyanide from the viewpoint of thermodynamics. The electrochemical study indicates that the anodic dissolution current densities of gold are 2.616, （1.805,） 1.267, 1.088, 0.556, and 0.145 mA·cm-2 respectively in the solutions of cyanide, alkaline thiourea containing Na2SiO3, SCN-, acidic thiourea, alkaline thiourea and thiosulfate at the potential of 0.500 V. Comparing various lixiviating agents, the alkaline thiourea solution containing Na2SiO3 is of prominent selectivity in leaching gold, in the potential range from 0.500 to 0.600 V, which is most efficient for leaching gold selectively instead of cyanide. The effect on leaching gold is similar to that in the cyanide system.
基金The National Mid-West Fund of China(2001BA901A47)the Knowledge Innovation Programs of the Chinese Academy of Sciences(CXLY-2002-08)
文摘In the present paper,the authors analysed 10 mineral elements in the roots of Rheum tanguticum collected from 30 different habitats.The mean concentration values of the 10 elements decreased as follows: Ca>Mg>K>Fe>Mn>Cr>Zn>Ni>Cu>Se. Ca,Mg,K and Fe were abundant in this herb.Most elements varied over a wide range depending on the different habitats.The mineral element data were evaluated by principal component analysis to reveal the distribution pattern of elements in root.Four principal components(K-Ca factor,Cu factor,Mg factor and Zn-Se factor) of plant elements were selected.The authors' study provided a new scientific foundation for further studies and general application of this Chinese herb.
基金International Plant Nutrition Institute(Hubei-22)the National Key Technologies R&D Program of China (2008BADA4B08)National Depart ment Public Benefit Research Foundation(200803029)
文摘The sudangrass(Sorghumsudanense) and ryegrass(Lolium multiflorum L.) rotation is a newtype of cropping system,which has developed rapidly in recent years in the south of China.The contents ofnutritional elements for forage grass in the sudangrass and ryegrass rotation system were determined by ICP-AES.The results showed that there were abundant and essential nutritional elements for ani mals in sudangrassand ryegrass.The contents of P,K,Ca,Mg,S,Fe,B,Cu,Zn and Mn for sudangrass were 0.20 %～0.29 %,1.94 %～2.57 %,0.62 %～0.97 %,0.39 %～0.69 %,0.12 %～0.18 %,108.35 ～180.12,3.04 ～5.96,6.17 ～10.02,20.37 ～31.36 and 46.80 ～101.29 mg.kg-1,respectively.The contents of P,K,Ca,Mg,S,Fe,B,Cu,Zn,Mn for ryegrass were 0.39 %～0.70 %,3.77 %～5.07 %,0.61 %～0.84 %,0.28 %～0.47 %,0.32 %～0.41 %,291.65 ～632.20,2.13 ～3.23,13.29 ～15.19,30.73 ～42.98 and 92.08 ～156.04 mg.kg-1,respectively,and there were differences between various periods in nutritional elements inthe two forage grasses.The application of ICP-AES could reflect fast and efficiently the content of nutritionalelements for forage grass as ani mals feed.
基金Preoject(2001CB409803) supported by the National Key Fundamental Research and Development Program of China
文摘The western Tianshan high-pressure(HP) metamorphic belt represents the paleosubduction mélange of paleozoic south Tianshan ocean between the Yili-central Tianshan and Tarim plates. High-pressure veins are extensively developed in this HP belt. Compared with normal mid-ocean ridge basalt(N-MORB), the high-pressure veins and host rocks are enriched in light rare earth elements(LREE) and incompatible elements. But high-pressure veins show a larger variation than host rocks in total REE abundance. On the trace element spidergram, all the samples are enriched in incompatible elements and show strong positive Pb anomaly relative to N-MORB. The array tendency lines of plots of the HP rocks have apparent slopes on diagram of m(Sr) vs m(Sr)/m(Zr), m(Li) vs m(Li)/m(Y) and (m(Ce)) vs m(Ce)/m(Pb), which indicates that the enrichment in LREE and incompatible elements relative to N-MORB of the HP-metamorphic rocks from western Tianshan is not attributed to magma evolution process of the protolith. High field strength elements, such as Nb, Ta, Ti, Zr and Hf, do not show negative anomaly relative to N-MORB, which is dissimilar to that of island arc basalts. Therefore, the enrichment in LREE and incompatible elements of the HP rocks is not attributed to the enrichment of the source of the protolith. The mass ratios of Rb to Ba, Ce to Pb, Nb to U and Ta to U of high-pressure veins and host rocks are intermediate of mid-ocean ridge basalt or oceanic island basalt and continental crust. The fluids in western Tianshan paleosubduction zones are mixtures of two sources, dehydration or devolatilization of host rocks and of subducted sediments.
基金supported by the National Natural Science Foundation of China(61174198)the PLA Military Graduate Students Foundation(2011JY002-163)
文摘This paper gives an analysis of the dynamic characteristics of situation elements(SEs) in situation awareness(SA)research. The purpose of the discussion is to understand the factors that influence SA and to help in designing the training systems to improve operators’ SA. The status function of SEs is defined and the derivative of the function represents trends of the status of SEs at each moment. Then, Fourier transform(FT) is used to give the frequency-domain function in terms of the time-domain status function. In frequency domain, the bandwidth of the status function is used as a criterion to characterize the notion of "fast" and"slow" of the change of SE’s status, which represents the dynamic characteristic of SEs. The criterion constitutes the first analytical measurement of the dynamic characteristic of SEs, which is one of the important factors that influence the SA process.
基金supported by the National Natural Science Foundation of China(90305026).
文摘Traditional multi-band frequency selective surface （FSS） approaches are hard to achieve a perfect resonance response in a wide band due to the limit of the onset grating lobe frequency determined by the array. To solve this problem, an approach of combining elements in different period to build a hybrid array is presented. The results of series of numerical simulation show that multi-periodicity combined element FSS, which are designed using this approach, usually have much weaker grating lobes than the traditional FSS. Furthermore, their frequency response can be well predicted through the properties of their member element FSS. A prediction method for estimating the degree of expected grating lobe energy loss in designing multi-band FSS using this approach is provided.
基金Project(21271187)supported by the National Natural Science Foundation of ChinaProject(cstc2013jcyj A10088)supported by the Chongqing Natural Science Foundation,China+1 种基金Projects(2013FJ3093,2013SK3268)supported by the Science and Technology Project of Hunan Province,ChinaProject(KJZH14217)supported by Achievement Transfer Education in Chongqing,China
文摘An inductively coupled plasma mass spectrometry(ICP-MS) method was developed for the determination of Na, Mg, Al,K, Ca, Ti, Cr, Co, Ni, Cu, Ga, As, Mo, Ag, Cd and Pb in MnZn ferrites. The sample was digested by HNO3+HCl with microwave digestion followed by dilution with ultrapure water, then the above 16 impurity elements in the solution were analyzed directly by ICP-MS. The impurity elements were introduced by the helium gas or hydrogen gas into the octopole reaction system(ORS) to eliminate the polyatomic interferences caused by the high salty matrixes. The matrix effect was minimized through matrix matching,and Be, Y and Rh were used as internal standard elements. The working parameters of the instrument were optimized. The results show that the method has good precision and high accuracy. The detection limits for the investigated elements are in the range of0.9-37.5 ng/L, the relative standard deviation of each element is within 1.1%-4.8%, and the recovery of each element is 90%-108%.
文摘Drinking water supply for the Main Ethiopian Rift (MER) area principally relies on groundwater wells and springs and is characterized by fluoride contamination. New analyses reveal that the F^- geochemical anomaly is associated with other potentially toxic elements such as As,B,Mo,U,Al,Fe and Mn. Particularly,35%of the 23 investigated groundwater wells and 70%of the 14 hot springs(and
文摘The content of trace elements in quartz has great importance for quality estimation of quartz raw material used for monocrystals synthesis and glass melting.Entering forms of trace elements in major economic types of vein quartz and rock crystals from the Subpolar Urals were studied using ISP-OES, electron microscopy,gas chromatography and radiospectroscopy.There were analyzed behavior impurities elements contents in quartz
