The hip’s lower limb exoskeleton essential and most important function is to support human’s payload as well as to enhance and assist human’s motion. It utilizes an electro-hydraulic servo manipulator which is requ...The hip’s lower limb exoskeleton essential and most important function is to support human’s payload as well as to enhance and assist human’s motion. It utilizes an electro-hydraulic servo manipulator which is required to achieve precise trajectory tracking and positioning operations. Nevertheless,these tasks require precise and robust control,which is very difficult to attain due to the inherent nonlinear dynamic behavior of the electro-hydraulic system caused by flow-pressure characteristics and fluid volume control variations of the servo valve. The sliding mode controller(SMC)is a widely used nonlinear robust controller,yet uncertainties and delay in the output degrade the closed-loop system performance and cause system instability. This work proposes a robust controller scheme that counts for the output delay and the inherent parameter uncertainties. Namely,a sliding mode controller enhanced by time-delay compensating observer for a typical electro-hydraulic servo system is adapted. SMC is utilized for its robustness against servo system parameters’ uncertainty whereas a time-delay observer estimates the variable states of the controller(velocity and acceleration). The main contribution of this paper is improving on the closed loop performance of the electro hydraulic servo system and mitigating the delay time effects. Simulation results prove the robustness of this controller,which forces the position to track the desired path regardless of the changes of the amount of transport delay of the system’s states. The performance of the proposed controller is validated by repeating the simulation analysis while varying the amount of delay time.展开更多
The frequency response design method for PDFSV (Pseudo Derivative Feedback Subvariable) control of electrohydraulic servo system is introduced. Theoretical analysis and computer simulation show that PDFSV con...The frequency response design method for PDFSV (Pseudo Derivative Feedback Subvariable) control of electrohydraulic servo system is introduced. Theoretical analysis and computer simulation show that PDFSV control is a high robust system, and a very good performance can be obtained when this theory is employed in electrohydraulic servo system.展开更多
The differential equations of motion of a comtlaint system with parameters and variable mass, of a system with variable mass and servo constraints and those for the control problem on the forced motion of constraint s...The differential equations of motion of a comtlaint system with parameters and variable mass, of a system with variable mass and servo constraints and those for the control problem on the forced motion of constraint systems with variable mass are given respectively. Finally, an example is presented.展开更多
Pump controlled motor electrohydraulic servo systems are much used in circumstances where high power drive is needed. This kind of system has the advantage of energy-saving. But, it also has some defects that have to ...Pump controlled motor electrohydraulic servo systems are much used in circumstances where high power drive is needed. This kind of system has the advantage of energy-saving. But, it also has some defects that have to be improved. Microcomputer control of a pump controlled motor electrohydraulic servo system is studied. A PID controller is first adopted on the closed loop control system, and experimental results are obtained. Then, a model reference adaptive controller is designed and realised on the same system applying a single board microcomputer. Experimental results show that the dynamic properties of the adaptive control system is much better than those of the PID system under different inertia load conditions.展开更多
Attitude control system is one of the most important subsystems in a spacecraft.As a key actuator,the control moment gyroscope(CMG)mainly determines the performance of attitude control system.Whereas,the control accur...Attitude control system is one of the most important subsystems in a spacecraft.As a key actuator,the control moment gyroscope(CMG)mainly determines the performance of attitude control system.Whereas,the control accuracy and output torque smoothness of the CMG depends more on its gimbal servo system.Considering the constraints of size,mass and power consumption for a small satellite,here,a mini-CMG is designed,in which the gimbal servo system is driven by an ultrasonic motor.The good performances of the CMG are obtained by both the ultrasonic motor and the rotary inductosyn.The direct drive of gimbal improves its dynamic performance,with the output bandwidth above 20 Hz.The angular and speed closed-loop control obtains the 0.02°/s gimbal rate,and the output torque resolution better than 2×10^(-3) N·m.The ultrasonic motor provides 1.0N·m self-lock torque during power-off,with 12arc-second position accuracy.展开更多
According to the characteristic of maneuvering targets tracking system, adaptive track predicting control is proposed from the point of predicting the motion track of the maneuvering target. For this method, least mea...According to the characteristic of maneuvering targets tracking system, adaptive track predicting control is proposed from the point of predicting the motion track of the maneuvering target. For this method, least mean square（LMS） adaptive filter is applied to estimate the future track of the target. The structure of this filter is simple and the calculation amount is small. It is therefore suitable to being used in real-time control system. Testing results have proved that the control method can improve the tracking precision for maneuvering targets obviously.展开更多
A novel design method for determining the proportional-integral-derivative(PID) controller gains of an anti-aircraft artillery servo system with multiple performance specifications based on a particle swarm optimizati...A novel design method for determining the proportional-integral-derivative(PID) controller gains of an anti-aircraft artillery servo system with multiple performance specifications based on a particle swarm optimization (PSO) algorithm is proposed. First, a performance criterion evolution function combined with the system maximum displacement settling time, rise time, overshoot, steady state error, constant velocity tracking error and sine wave tracking error is defined. Second, the optimization problem of PID controller parameters and the searching procedure of PSO algorithm are constructed. Finally, the optimal or near optimal PID controller parameters are fast and easily obtained by solving the above optimization problem on the given controller parameter space following the PSO searching procedure. The simulation results show the effectiveness of the proposed controllers.展开更多
In order to design a low-cost pneumatic force servo system with large output forces,a scheme of a booster cylinder controlled by high speed solenoid valves is proposed.A nonlinear model of the system is established,in...In order to design a low-cost pneumatic force servo system with large output forces,a scheme of a booster cylinder controlled by high speed solenoid valves is proposed.A nonlinear model of the system is established,in which the hysteresis of high speed solenoid valve is considered.In order to deal with parameter uncertainty and disturbances of noise and friction,a feed-forward control method based on a disturbance observer is proposed.A practical pneumatic force servo system is used to testify the feasibility of the proposed controller.The experimental results show that pneumatic force servo system based on the proposed controller has high force tracking accuracy and quick response.展开更多
The paper presents an output feedback controller design method for high-order servo system with the constraints of multiple indices by using satisfactory control theory. The control strategy is to convert transfer-fun...The paper presents an output feedback controller design method for high-order servo system with the constraints of multiple indices by using satisfactory control theory. The control strategy is to convert transfer-function form of two-loop servo system into state-space form and assign the system poles in the specified region and H_∞ attenuation degree in the given range with the Riccati matrix inequality so that the closed-loop system has good dynamics and robust quality. A numeric example is given to show the effectiveness of the proposed approach.展开更多
Research on a servo tracking system mounted with a small arm for robot fighting platform based on multi-body system dynamics and intelligent control theory is presented.A multi-body dynamic model which can accurately ...Research on a servo tracking system mounted with a small arm for robot fighting platform based on multi-body system dynamics and intelligent control theory is presented.A multi-body dynamic model which can accurately express dynamic performances of the system is built in ADAMS.In addition,an intelligent PID control model is built with MATLAB/Simulink,and the two models are integrated and co-simulated by the interface of ADAMS/Controls.Simulation experiments indicate that co-simulation technique used for design of the servo tracking system mounted with a small arm can effectively improve its design efficiency,and can also provide theoretical bases for the motion control and performance improvement of the servo tracking system mounted with a small arm.展开更多
文摘The hip’s lower limb exoskeleton essential and most important function is to support human’s payload as well as to enhance and assist human’s motion. It utilizes an electro-hydraulic servo manipulator which is required to achieve precise trajectory tracking and positioning operations. Nevertheless,these tasks require precise and robust control,which is very difficult to attain due to the inherent nonlinear dynamic behavior of the electro-hydraulic system caused by flow-pressure characteristics and fluid volume control variations of the servo valve. The sliding mode controller(SMC)is a widely used nonlinear robust controller,yet uncertainties and delay in the output degrade the closed-loop system performance and cause system instability. This work proposes a robust controller scheme that counts for the output delay and the inherent parameter uncertainties. Namely,a sliding mode controller enhanced by time-delay compensating observer for a typical electro-hydraulic servo system is adapted. SMC is utilized for its robustness against servo system parameters’ uncertainty whereas a time-delay observer estimates the variable states of the controller(velocity and acceleration). The main contribution of this paper is improving on the closed loop performance of the electro hydraulic servo system and mitigating the delay time effects. Simulation results prove the robustness of this controller,which forces the position to track the desired path regardless of the changes of the amount of transport delay of the system’s states. The performance of the proposed controller is validated by repeating the simulation analysis while varying the amount of delay time.
文摘The frequency response design method for PDFSV (Pseudo Derivative Feedback Subvariable) control of electrohydraulic servo system is introduced. Theoretical analysis and computer simulation show that PDFSV control is a high robust system, and a very good performance can be obtained when this theory is employed in electrohydraulic servo system.
文摘The differential equations of motion of a comtlaint system with parameters and variable mass, of a system with variable mass and servo constraints and those for the control problem on the forced motion of constraint systems with variable mass are given respectively. Finally, an example is presented.
基金The Project Supported by Doctoral Programme Foundation of Institution of Higher Education
文摘Pump controlled motor electrohydraulic servo systems are much used in circumstances where high power drive is needed. This kind of system has the advantage of energy-saving. But, it also has some defects that have to be improved. Microcomputer control of a pump controlled motor electrohydraulic servo system is studied. A PID controller is first adopted on the closed loop control system, and experimental results are obtained. Then, a model reference adaptive controller is designed and realised on the same system applying a single board microcomputer. Experimental results show that the dynamic properties of the adaptive control system is much better than those of the PID system under different inertia load conditions.
基金supported by the National Natural Science Foundation of China(No.51575260)the Fundamental Research Funds for the Central Universities(No.NJ20160001)
文摘Attitude control system is one of the most important subsystems in a spacecraft.As a key actuator,the control moment gyroscope(CMG)mainly determines the performance of attitude control system.Whereas,the control accuracy and output torque smoothness of the CMG depends more on its gimbal servo system.Considering the constraints of size,mass and power consumption for a small satellite,here,a mini-CMG is designed,in which the gimbal servo system is driven by an ultrasonic motor.The good performances of the CMG are obtained by both the ultrasonic motor and the rotary inductosyn.The direct drive of gimbal improves its dynamic performance,with the output bandwidth above 20 Hz.The angular and speed closed-loop control obtains the 0.02°/s gimbal rate,and the output torque resolution better than 2×10^(-3) N·m.The ultrasonic motor provides 1.0N·m self-lock torque during power-off,with 12arc-second position accuracy.
文摘According to the characteristic of maneuvering targets tracking system, adaptive track predicting control is proposed from the point of predicting the motion track of the maneuvering target. For this method, least mean square（LMS） adaptive filter is applied to estimate the future track of the target. The structure of this filter is simple and the calculation amount is small. It is therefore suitable to being used in real-time control system. Testing results have proved that the control method can improve the tracking precision for maneuvering targets obviously.
基金Sponsored by National Nature Science Foundation of China (60174028)
文摘A novel design method for determining the proportional-integral-derivative(PID) controller gains of an anti-aircraft artillery servo system with multiple performance specifications based on a particle swarm optimization (PSO) algorithm is proposed. First, a performance criterion evolution function combined with the system maximum displacement settling time, rise time, overshoot, steady state error, constant velocity tracking error and sine wave tracking error is defined. Second, the optimization problem of PID controller parameters and the searching procedure of PSO algorithm are constructed. Finally, the optimal or near optimal PID controller parameters are fast and easily obtained by solving the above optimization problem on the given controller parameter space following the PSO searching procedure. The simulation results show the effectiveness of the proposed controllers.
基金Supported by the National Natural Science Foundation of China(51375045)the State Key Laboratory Program of Fluid Power and Mechatronic Systems of China(GZKF-201214)
文摘In order to design a low-cost pneumatic force servo system with large output forces,a scheme of a booster cylinder controlled by high speed solenoid valves is proposed.A nonlinear model of the system is established,in which the hysteresis of high speed solenoid valve is considered.In order to deal with parameter uncertainty and disturbances of noise and friction,a feed-forward control method based on a disturbance observer is proposed.A practical pneumatic force servo system is used to testify the feasibility of the proposed controller.The experimental results show that pneumatic force servo system based on the proposed controller has high force tracking accuracy and quick response.
文摘The paper presents an output feedback controller design method for high-order servo system with the constraints of multiple indices by using satisfactory control theory. The control strategy is to convert transfer-function form of two-loop servo system into state-space form and assign the system poles in the specified region and H_∞ attenuation degree in the given range with the Riccati matrix inequality so that the closed-loop system has good dynamics and robust quality. A numeric example is given to show the effectiveness of the proposed approach.
基金Sponsored by the Independent Research Foundation of State Key Laboratory(ZDKT08-05)the Ministerial Level Research Foundation(06104040)
文摘Research on a servo tracking system mounted with a small arm for robot fighting platform based on multi-body system dynamics and intelligent control theory is presented.A multi-body dynamic model which can accurately express dynamic performances of the system is built in ADAMS.In addition,an intelligent PID control model is built with MATLAB/Simulink,and the two models are integrated and co-simulated by the interface of ADAMS/Controls.Simulation experiments indicate that co-simulation technique used for design of the servo tracking system mounted with a small arm can effectively improve its design efficiency,and can also provide theoretical bases for the motion control and performance improvement of the servo tracking system mounted with a small arm.
