Metamorphic In0.55Ga0.45P/In0.06Ga0.94As/Ge triple-junction （3J-MM） solar cells are grown on Ge （100） sub- strates via metal organic chemical vapor deposition. Epi-structural analyses such as high resolution x-ray...Metamorphic In0.55Ga0.45P/In0.06Ga0.94As/Ge triple-junction （3J-MM） solar cells are grown on Ge （100） sub- strates via metal organic chemical vapor deposition. Epi-structural analyses such as high resolution x-ray diffrac- tion, photoluminence, cathodoluminescence and HRTEM are employed and the results show that the high crystal quality of 3J-MM solar cells is obtained with low threading dislocation density of graded buffer （an average value of 6.8× 10^4/cm2）. Benefitting from the optimized bandgap combination, under one sun, AM0 spectrum, 25℃ conditions, the conversion efficiency is achieved about 32%, 5% higher compared with the lattice-matched In0.49Ga0.51P/In0.01Ga0.99As/Ge triple junction （3J-LM） solar cell. Under 1-MeV electron irradiation test, the degradation of the EQE and I-V characteristics of 3J-MM solar cells is at the same level as the 33-LM solar cell. The end-of-life efficiency is -27.1%. Therefore, the metamorphic triple-junction solar cell may be a promising candidate for next-generation space multi-junction solar cells.展开更多
We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transpor...We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transporting layer in blue organic light emitting diodes. As an exciton feedback layer （EFL）, the BAlq does not act as a traditional hole blocking effect. The design of this kind of device structure can greatly reduce excitons＇ quenching due to accumulated space charge at the exciton formation interface. Meanwhile, the non-radiative energy transfer from EFL to the EML can also be utilized to enhance the excitons＇ formation, which is confirmed by the test of photolumimescent transient lifetime decay and electroluminescence enhancement of these devices. Accordingly, the optimal device presents the improved performances with the maximum current efficiency of 4.2 cd/A and the luminance of 24600cd/m2, which are about 1.45 times and 1.75 times higher than those of device A （control device） without the EFL, respectively. Simultaneously, the device shows an excellent color stability with a tiny offset of the CIE coordinates （△x = ±0.003, △y = ±0.004） and a relatively lower efficiency roll-off of 26.2% under the driving voltage varying from 3 V to 10 V.展开更多
A facile route is developed to fabricate BiOCI porous cotton-like nanostructure by using Bi203 and hydrochlo- ric acid as raw materials. The BiOCI nanomaterial is actually hierarchically structured by numerous ultrath...A facile route is developed to fabricate BiOCI porous cotton-like nanostructure by using Bi203 and hydrochlo- ric acid as raw materials. The BiOCI nanomaterial is actually hierarchically structured by numerous ultrathin nanosheets. The nanosheets are around 50-500 nm in lateral size and 2-12 nm in thickness. High-resolution trans- mission electron microscopy and selected-area electron diffraction analyses indicate that single-crystalline BiOCl nanosheets have the predominant growth direction along [110], the bottom and top surfaces are {001} facets, and four lateral surfaces are {110} facets. The BiOCl nanosheets are dominantly enclosed by {001} facets. From the diffuse reflectance spectroscopy spectrum, the light absorption edge and band gap energy （Eg） are estimated to be 416 nm and 2.98eV, respectively. The BiOCl photocatalyst possesses superior activity for methyl orange （MO） degradation under visible light irradiation and the photodegradation efficiency is up to 91.5%/180 min. The correlation between morphology and microstructure with enhanced MO-sensitized photodegradation performance under visible light is investigated.展开更多
In this paper,a simple adaptive power dividing function for the design of a dual-input Doherty power amplifier(DPA)is presented.In the presented approaches,the signal separation function(SSF)at different frequency poi...In this paper,a simple adaptive power dividing function for the design of a dual-input Doherty power amplifier(DPA)is presented.In the presented approaches,the signal separation function(SSF)at different frequency points can be characterized by a polynomial.And in the practical test,the coefficients of SSF can be determined by measuring a small number of data points of input power.Same as other dualinput DPAs,the proposed approach can also achieve high output power and back-off efficiency in a broadband operation band by adjusting the power distribution ratio flexibly.Finally,a 1.5-2.5 GHz highefficiency dual-input Doherty power amplifier is implemented according to this approach.The test results show that the peak power is 48.6-49.7d Bm,and the 6-d B back-off efficiency is 51.0-67.0%,and the saturation efficiency is 52.4-74.6%.The digital predistortion correction is carried out at the frequency points of 1.8/2.1GHz,and the adjacent channel power ratio is lower than-54.5d Bc.Simulation and experiment results can verify the effectiveness and correctness of the proposed method.展开更多
Based on analyzing the conservation of energy of penetrator with enhanced lateral efficiency （PELE） the penetrating against metal target, a theoretical expression predicting the residual velocity of PELE perforating...Based on analyzing the conservation of energy of penetrator with enhanced lateral efficiency （PELE） the penetrating against metal target, a theoretical expression predicting the residual velocity of PELE perforating the target is obtained. By modifying De Marre semi-experience formula,the ballistic limit velocities of PELE penetrating into 2024 aluminum alloy and 45# steel targets are also given. The theoretical predictions fit well with experimental or simulative results.展开更多
The two major limitations in the application of SnO_2 for lithium?ion battery(LIB) anodes are the large volume variations of SnO_2 during repeated lithiation/delithiation processes and a large irreversible capacity lo...The two major limitations in the application of SnO_2 for lithium?ion battery(LIB) anodes are the large volume variations of SnO_2 during repeated lithiation/delithiation processes and a large irreversible capacity loss during the first cycle, which can lead to a rapid capacity fade and unsatisfactory initial Coulombic e ciency(ICE). To overcome these limitations, we developed composites of ultrafine SnO_2 nanoparticles and in situ formed Co(CoSn) nanocrystals embedded in an N?doped carbon matrix using a Co?based metal–organic framework(ZIF?67). The formed Co additives and structural advantages of the carbon?confined SnO_2/Co nanocomposite e ectively inhibited Sn coarsening in the lithiated SnO_2 and mitigated its structural degradation while facilitating fast electronic transport and facile ionic di usion. As a result, the electrodes demonstrated high ICE (82.2%), outstanding rate capability(～ 800 mAh g^(-1) at a high current density of 5 A g^(-1)), and long?term cycling stability(～ 760 mAh g^(-1) after 400 cycles at a current density of 0.5 A g^(-1)). This study will be helpful in developing high?performance Si(Sn)?based oxide, Sn/Sb?based sulfide, or selenide electrodes for LIBs. In addition, some metal organic frameworks similar to ZIF?67 can also be used as composite templates.展开更多
基金Supported by the Grand from Tianjin Little Giant Fund under Grant No 14ZXLJGX00400the Tianjin Science and Technology Support Plan under Grant No 16YFZCGX00030
文摘Metamorphic In0.55Ga0.45P/In0.06Ga0.94As/Ge triple-junction （3J-MM） solar cells are grown on Ge （100） sub- strates via metal organic chemical vapor deposition. Epi-structural analyses such as high resolution x-ray diffrac- tion, photoluminence, cathodoluminescence and HRTEM are employed and the results show that the high crystal quality of 3J-MM solar cells is obtained with low threading dislocation density of graded buffer （an average value of 6.8× 10^4/cm2）. Benefitting from the optimized bandgap combination, under one sun, AM0 spectrum, 25℃ conditions, the conversion efficiency is achieved about 32%, 5% higher compared with the lattice-matched In0.49Ga0.51P/In0.01Ga0.99As/Ge triple junction （3J-LM） solar cell. Under 1-MeV electron irradiation test, the degradation of the EQE and I-V characteristics of 3J-MM solar cells is at the same level as the 33-LM solar cell. The end-of-life efficiency is -27.1%. Therefore, the metamorphic triple-junction solar cell may be a promising candidate for next-generation space multi-junction solar cells.
基金Supported by the National Natural Science Foundation of China under Grant No 60906022the Natural Science Foundation of Tianjin under Grant No 10JCYBJC01100+1 种基金the Scientific Developing Foundation of Tianjin Education Commission under Grant No 2011ZD02the Key Science and Technology Support Program of Tianjin under Grant No 14ZCZDGX00006
文摘We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transporting layer in blue organic light emitting diodes. As an exciton feedback layer （EFL）, the BAlq does not act as a traditional hole blocking effect. The design of this kind of device structure can greatly reduce excitons＇ quenching due to accumulated space charge at the exciton formation interface. Meanwhile, the non-radiative energy transfer from EFL to the EML can also be utilized to enhance the excitons＇ formation, which is confirmed by the test of photolumimescent transient lifetime decay and electroluminescence enhancement of these devices. Accordingly, the optimal device presents the improved performances with the maximum current efficiency of 4.2 cd/A and the luminance of 24600cd/m2, which are about 1.45 times and 1.75 times higher than those of device A （control device） without the EFL, respectively. Simultaneously, the device shows an excellent color stability with a tiny offset of the CIE coordinates （△x = ±0.003, △y = ±0.004） and a relatively lower efficiency roll-off of 26.2% under the driving voltage varying from 3 V to 10 V.
基金Supported by the International Science and Technology Cooperation Program of China under Grant No 2014DFA60150the National Natural Science Foundation of China under Grant Nos 51172113 and 51373086the Taishan Scholar Overseas Distinguished Professorship Program from the Shandong Provincial Government
文摘A facile route is developed to fabricate BiOCI porous cotton-like nanostructure by using Bi203 and hydrochlo- ric acid as raw materials. The BiOCI nanomaterial is actually hierarchically structured by numerous ultrathin nanosheets. The nanosheets are around 50-500 nm in lateral size and 2-12 nm in thickness. High-resolution trans- mission electron microscopy and selected-area electron diffraction analyses indicate that single-crystalline BiOCl nanosheets have the predominant growth direction along [110], the bottom and top surfaces are {001} facets, and four lateral surfaces are {110} facets. The BiOCl nanosheets are dominantly enclosed by {001} facets. From the diffuse reflectance spectroscopy spectrum, the light absorption edge and band gap energy （Eg） are estimated to be 416 nm and 2.98eV, respectively. The BiOCl photocatalyst possesses superior activity for methyl orange （MO） degradation under visible light irradiation and the photodegradation efficiency is up to 91.5%/180 min. The correlation between morphology and microstructure with enhanced MO-sensitized photodegradation performance under visible light is investigated.
基金supported by National Natural Science Foundation of China(No.62001061)。
文摘In this paper,a simple adaptive power dividing function for the design of a dual-input Doherty power amplifier(DPA)is presented.In the presented approaches,the signal separation function(SSF)at different frequency points can be characterized by a polynomial.And in the practical test,the coefficients of SSF can be determined by measuring a small number of data points of input power.Same as other dualinput DPAs,the proposed approach can also achieve high output power and back-off efficiency in a broadband operation band by adjusting the power distribution ratio flexibly.Finally,a 1.5-2.5 GHz highefficiency dual-input Doherty power amplifier is implemented according to this approach.The test results show that the peak power is 48.6-49.7d Bm,and the 6-d B back-off efficiency is 51.0-67.0%,and the saturation efficiency is 52.4-74.6%.The digital predistortion correction is carried out at the frequency points of 1.8/2.1GHz,and the adjacent channel power ratio is lower than-54.5d Bc.Simulation and experiment results can verify the effectiveness and correctness of the proposed method.
文摘Based on analyzing the conservation of energy of penetrator with enhanced lateral efficiency （PELE） the penetrating against metal target, a theoretical expression predicting the residual velocity of PELE perforating the target is obtained. By modifying De Marre semi-experience formula,the ballistic limit velocities of PELE penetrating into 2024 aluminum alloy and 45# steel targets are also given. The theoretical predictions fit well with experimental or simulative results.
基金supported by the National Key R&D Program of China (No. 2016YFA0202602)the National Natural Science Foundation of China (Grant Nos. 21503178 and 21703185)supported by XMU Undergraduate Innovation and Entrepreneurship Training Programs (Grants No. 2017X0695 for Huijiao Yang and Xiaocong Tang)
文摘The two major limitations in the application of SnO_2 for lithium?ion battery(LIB) anodes are the large volume variations of SnO_2 during repeated lithiation/delithiation processes and a large irreversible capacity loss during the first cycle, which can lead to a rapid capacity fade and unsatisfactory initial Coulombic e ciency(ICE). To overcome these limitations, we developed composites of ultrafine SnO_2 nanoparticles and in situ formed Co(CoSn) nanocrystals embedded in an N?doped carbon matrix using a Co?based metal–organic framework(ZIF?67). The formed Co additives and structural advantages of the carbon?confined SnO_2/Co nanocomposite e ectively inhibited Sn coarsening in the lithiated SnO_2 and mitigated its structural degradation while facilitating fast electronic transport and facile ionic di usion. As a result, the electrodes demonstrated high ICE (82.2%), outstanding rate capability(～ 800 mAh g^(-1) at a high current density of 5 A g^(-1)), and long?term cycling stability(～ 760 mAh g^(-1) after 400 cycles at a current density of 0.5 A g^(-1)). This study will be helpful in developing high?performance Si(Sn)?based oxide, Sn/Sb?based sulfide, or selenide electrodes for LIBs. In addition, some metal organic frameworks similar to ZIF?67 can also be used as composite templates.
