The effects of concrete's time-variant elastic modulus,casting structural components,assembling temporary shoring framework system,and shock by operating construction equipment on dynamic behavior of the reinforce...The effects of concrete's time-variant elastic modulus,casting structural components,assembling temporary shoring framework system,and shock by operating construction equipment on dynamic behavior of the reinforced concrete frame structure during construction were investigated. The dynamic tests of an eight-storey reinforced concrete frame structure during full-scaled stages of the sixth storey construction cycle were carried out by ambient vibration. Natural frequencies,corresponding mode shapes and damping ratio were determined by power spectrum processing the tested signal data in frequency domain. The changes of frequencies,mode shapes and damping ratios at different construction stages were given. The results show that natural frequencies and modal damping ratios reach the maximum at stage of casting fresh concrete,especially for higher modes. Modal damping ratios at each construction stage are less than 5% of those during usage.展开更多
The AERORail, a new aerial transport platform, was chosen as the object of this work. Following a review of the literature on static behaviors, model tests on the basic dynamic mechanical characteristics were conducte...The AERORail, a new aerial transport platform, was chosen as the object of this work. Following a review of the literature on static behaviors, model tests on the basic dynamic mechanical characteristics were conducted. A series of 90 tests were completed with different factors, including tension force, vehicle load and vehicle speed. With regard to the proper tension and vehicle load, at a certain speed range, the tension increments of the rail's cable were proved relatively small. It can be assumed that the change of tension is small and can be reasonably ignored when the tension of an entire span is under a dynamic load. When the tension reaches a certain range, the calculation of the cable track structure using classical cable theory is acceptable. The tests prove that the average maximum dynamic amplification factor of the deflection is small, generally no more than 1.2. However, when the vehicle speed reaches a certain value, the amplified factor will reach 2.0. If the moving loads increase, the dynamic amplification factor of dynamic deflection will also increase. The tension will change the rigidity of the structure and the vibration frequency; furthermore, the resonance speed will change at a certain tension. The vibration is noticeable when vehicles pass through at the resonance speed, and this negative impact on driving comfort requires the right velocity to avoid the resonance. The results demonstrate that more design details are required for the AERORail structure.展开更多
文章针对高超声速可变形减速器的飞行稳定性预测及回收着陆需求,研究表面结构变形对减速器气动特性的影响效应,重点分析了高度10~50 km、Ma=0.15~4.6关键速域内的静、动态气动特性变化。文章采用求解雷诺平均Navier-Stokes方程(Reynolds...文章针对高超声速可变形减速器的飞行稳定性预测及回收着陆需求,研究表面结构变形对减速器气动特性的影响效应,重点分析了高度10~50 km、Ma=0.15~4.6关键速域内的静、动态气动特性变化。文章采用求解雷诺平均Navier-Stokes方程(Reynolds average Navier-Stokes,RANS)的数值模拟方法,获得了有无表面结构变形减速器的流场和气动参数。定常计算结果表明:变形效应导致飞行器迎风面存在局部的小尺度流动分离,变形后外形的气动阻力增加。结合刚性动网格技术的俯仰强迫振动,计算结果表明:减速器的动态稳定性受到迎风面高压及背风面分离涡结构的共同作用,迎风面的高气动压力载荷占主导作用,使得减速器的动态稳定性增强;背风面的涡结构导致动态稳定性减弱;轴对称分布的表面结构变形整体上增强了减速器的动态稳定性。展开更多
针对自由表面流动与弹性结构的流固耦合计算效率低、计算耗时长的问题,将流体体积法与基于结构-虚拟弹性体的快速动网格方法相结合,发展了一种适用于自由表面流动的高效流固耦合方法。使用流体体积(volume of fluid,VOF)法对流体自由表...针对自由表面流动与弹性结构的流固耦合计算效率低、计算耗时长的问题,将流体体积法与基于结构-虚拟弹性体的快速动网格方法相结合,发展了一种适用于自由表面流动的高效流固耦合方法。使用流体体积(volume of fluid,VOF)法对流体自由表面进行追踪;将流体域视为虚拟弹性体并构建结构-虚拟弹性体系统,以流固耦合界面的多相流体力为激励求解系统的动力学方程得到结构振动位移和流场网格变形;在每一个时间步内依次求解流体流动、结构变形和流场动网格,实现流固耦合计算。基于发展的方法计算了溃坝水流冲击下弹性挡板的流固耦合响应,得到了溃坝水流的自由液面和弹性挡板的运动行为,结果表明:自由液面演变和弹性挡板振动位移的计算结果与已有算法的结果吻合良好;在同等网格规模下,与已有算法相比本文方法可减少33.3%的计算时间;在水流冲击作用下,弹性挡板向冲击侧小幅弯曲。随后水流沿挡板左侧上升并形成射流,挡板向另一侧大幅弯曲。最后由于两侧流体的阻尼,挡板振幅逐渐衰减。展开更多
基金Project(50678064) supported by the National Natural Science Foundation of China
文摘The effects of concrete's time-variant elastic modulus,casting structural components,assembling temporary shoring framework system,and shock by operating construction equipment on dynamic behavior of the reinforced concrete frame structure during construction were investigated. The dynamic tests of an eight-storey reinforced concrete frame structure during full-scaled stages of the sixth storey construction cycle were carried out by ambient vibration. Natural frequencies,corresponding mode shapes and damping ratio were determined by power spectrum processing the tested signal data in frequency domain. The changes of frequencies,mode shapes and damping ratios at different construction stages were given. The results show that natural frequencies and modal damping ratios reach the maximum at stage of casting fresh concrete,especially for higher modes. Modal damping ratios at each construction stage are less than 5% of those during usage.
基金Projects(50708072,51378385)supported by the National Natural Science Foundation of China
文摘The AERORail, a new aerial transport platform, was chosen as the object of this work. Following a review of the literature on static behaviors, model tests on the basic dynamic mechanical characteristics were conducted. A series of 90 tests were completed with different factors, including tension force, vehicle load and vehicle speed. With regard to the proper tension and vehicle load, at a certain speed range, the tension increments of the rail's cable were proved relatively small. It can be assumed that the change of tension is small and can be reasonably ignored when the tension of an entire span is under a dynamic load. When the tension reaches a certain range, the calculation of the cable track structure using classical cable theory is acceptable. The tests prove that the average maximum dynamic amplification factor of the deflection is small, generally no more than 1.2. However, when the vehicle speed reaches a certain value, the amplified factor will reach 2.0. If the moving loads increase, the dynamic amplification factor of dynamic deflection will also increase. The tension will change the rigidity of the structure and the vibration frequency; furthermore, the resonance speed will change at a certain tension. The vibration is noticeable when vehicles pass through at the resonance speed, and this negative impact on driving comfort requires the right velocity to avoid the resonance. The results demonstrate that more design details are required for the AERORail structure.
文摘文章针对高超声速可变形减速器的飞行稳定性预测及回收着陆需求,研究表面结构变形对减速器气动特性的影响效应,重点分析了高度10~50 km、Ma=0.15~4.6关键速域内的静、动态气动特性变化。文章采用求解雷诺平均Navier-Stokes方程(Reynolds average Navier-Stokes,RANS)的数值模拟方法,获得了有无表面结构变形减速器的流场和气动参数。定常计算结果表明:变形效应导致飞行器迎风面存在局部的小尺度流动分离,变形后外形的气动阻力增加。结合刚性动网格技术的俯仰强迫振动,计算结果表明:减速器的动态稳定性受到迎风面高压及背风面分离涡结构的共同作用,迎风面的高气动压力载荷占主导作用,使得减速器的动态稳定性增强;背风面的涡结构导致动态稳定性减弱;轴对称分布的表面结构变形整体上增强了减速器的动态稳定性。
文摘针对自由表面流动与弹性结构的流固耦合计算效率低、计算耗时长的问题,将流体体积法与基于结构-虚拟弹性体的快速动网格方法相结合,发展了一种适用于自由表面流动的高效流固耦合方法。使用流体体积(volume of fluid,VOF)法对流体自由表面进行追踪;将流体域视为虚拟弹性体并构建结构-虚拟弹性体系统,以流固耦合界面的多相流体力为激励求解系统的动力学方程得到结构振动位移和流场网格变形;在每一个时间步内依次求解流体流动、结构变形和流场动网格,实现流固耦合计算。基于发展的方法计算了溃坝水流冲击下弹性挡板的流固耦合响应,得到了溃坝水流的自由液面和弹性挡板的运动行为,结果表明:自由液面演变和弹性挡板振动位移的计算结果与已有算法的结果吻合良好;在同等网格规模下,与已有算法相比本文方法可减少33.3%的计算时间;在水流冲击作用下,弹性挡板向冲击侧小幅弯曲。随后水流沿挡板左侧上升并形成射流,挡板向另一侧大幅弯曲。最后由于两侧流体的阻尼,挡板振幅逐渐衰减。
